?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'for-linus-20190706' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / arch / arm64 / crypto / sha512-armv8.pl
blob2d8655d5b1af5132ca71af46f364cb7b6ca2628e
1 #! /usr/bin/env perl
2 # SPDX-License-Identifier: GPL-2.0
3
4 # This code is taken from the OpenSSL project but the author (Andy Polyakov)
5 # has relicensed it under the GPLv2. Therefore this program is free software;
6 # you can redistribute it and/or modify it under the terms of the GNU General
7 # Public License version 2 as published by the Free Software Foundation.
8 #
9 # The original headers, including the original license headers, are
10 # included below for completeness.
11
12 # Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved.
13 #
14 # Licensed under the OpenSSL license (the "License"). You may not use
15 # this file except in compliance with the License. You can obtain a copy
16 # in the file LICENSE in the source distribution or at
17 # https://www.openssl.org/source/license.html
18
19 # ====================================================================
20 # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
21 # project. The module is, however, dual licensed under OpenSSL and
22 # CRYPTOGAMS licenses depending on where you obtain it. For further
23 # details see http://www.openssl.org/~appro/cryptogams/.
24 # ====================================================================
25 #
26 # SHA256/512 for ARMv8.
27 #
28 # Performance in cycles per processed byte and improvement coefficient
29 # over code generated with "default" compiler:
30 #
31 # SHA256-hw SHA256(*) SHA512
32 # Apple A7 1.97 10.5 (+33%) 6.73 (-1%(**))
33 # Cortex-A53 2.38 15.5 (+115%) 10.0 (+150%(***))
34 # Cortex-A57 2.31 11.6 (+86%) 7.51 (+260%(***))
35 # Denver 2.01 10.5 (+26%) 6.70 (+8%)
36 # X-Gene 20.0 (+100%) 12.8 (+300%(***))
37 # Mongoose 2.36 13.0 (+50%) 8.36 (+33%)
38 #
39 # (*) Software SHA256 results are of lesser relevance, presented
40 # mostly for informational purposes.
41 # (**) The result is a trade-off: it's possible to improve it by
42 # 10% (or by 1 cycle per round), but at the cost of 20% loss
43 # on Cortex-A53 (or by 4 cycles per round).
44 # (***) Super-impressive coefficients over gcc-generated code are
45 # indication of some compiler "pathology", most notably code
46 # generated with -mgeneral-regs-only is significanty faster
47 # and the gap is only 40-90%.
48 #
49 # October 2016.
50 #
51 # Originally it was reckoned that it makes no sense to implement NEON
52 # version of SHA256 for 64-bit processors. This is because performance
53 # improvement on most wide-spread Cortex-A5x processors was observed
54 # to be marginal, same on Cortex-A53 and ~10% on A57. But then it was
55 # observed that 32-bit NEON SHA256 performs significantly better than
56 # 64-bit scalar version on *some* of the more recent processors. As
57 # result 64-bit NEON version of SHA256 was added to provide best
58 # all-round performance. For example it executes ~30% faster on X-Gene
59 # and Mongoose. [For reference, NEON version of SHA512 is bound to
60 # deliver much less improvement, likely *negative* on Cortex-A5x.
61 # Which is why NEON support is limited to SHA256.]
62
63 $output=pop;
64 $flavour=pop;
65
66 if ($flavour && $flavour ne "void") {
67 $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
68 ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
69 ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
70 die "can't locate arm-xlate.pl";
71
72 open OUT,"| \"$^X\" $xlate $flavour $output";
73 *STDOUT=*OUT;
74 } else {
75 open STDOUT,">$output";
76 }
77
78 if ($output =~ /512/) {
79 $BITS=512;
80 $SZ=8;
81 @Sigma0=(28,34,39);
82 @Sigma1=(14,18,41);
83 @sigma0=(1, 8, 7);
84 @sigma1=(19,61, 6);
85 $rounds=80;
86 $reg_t="x";
87 } else {
88 $BITS=256;
89 $SZ=4;
90 @Sigma0=( 2,13,22);
91 @Sigma1=( 6,11,25);
92 @sigma0=( 7,18, 3);
93 @sigma1=(17,19,10);
94 $rounds=64;
95 $reg_t="w";
96 }
97
98 $func="sha${BITS}_block_data_order";
99
100 ($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30));
101
102 @X=map("$reg_t$_",(3..15,0..2));
103 @V=($A,$B,$C,$D,$E,$F,$G,$H)=map("$reg_t$_",(20..27));
104 ($t0,$t1,$t2,$t3)=map("$reg_t$_",(16,17,19,28));
105
106 sub BODY_00_xx {
107 my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
108 my $j=($i+1)&15;
109 my ($T0,$T1,$T2)=(@X[($i-8)&15],@X[($i-9)&15],@X[($i-10)&15]);
110 $T0=@X[$i+3] if ($i<11);
111
112 $code.=<<___ if ($i<16);
113 #ifndef __AARCH64EB__
114 rev @X[$i],@X[$i] // $i
115 #endif
116 ___
117 $code.=<<___ if ($i<13 && ($i&1));
118 ldp @X[$i+1],@X[$i+2],[$inp],#2*$SZ
119 ___
120 $code.=<<___ if ($i==13);
121 ldp @X[14],@X[15],[$inp]
122 ___
123 $code.=<<___ if ($i>=14);
124 ldr @X[($i-11)&15],[sp,#`$SZ*(($i-11)%4)`]
125 ___
126 $code.=<<___ if ($i>0 && $i<16);
127 add $a,$a,$t1 // h+=Sigma0(a)
128 ___
129 $code.=<<___ if ($i>=11);
130 str @X[($i-8)&15],[sp,#`$SZ*(($i-8)%4)`]
131 ___
132 # While ARMv8 specifies merged rotate-n-logical operation such as
133 # 'eor x,y,z,ror#n', it was found to negatively affect performance
134 # on Apple A7. The reason seems to be that it requires even 'y' to
135 # be available earlier. This means that such merged instruction is
136 # not necessarily best choice on critical path... On the other hand
137 # Cortex-A5x handles merged instructions much better than disjoint
138 # rotate and logical... See (**) footnote above.
139 $code.=<<___ if ($i<15);
140 ror $t0,$e,#$Sigma1[0]
141 add $h,$h,$t2 // h+=K[i]
142 eor $T0,$e,$e,ror#`$Sigma1[2]-$Sigma1[1]`
143 and $t1,$f,$e
144 bic $t2,$g,$e
145 add $h,$h,@X[$i&15] // h+=X[i]
146 orr $t1,$t1,$t2 // Ch(e,f,g)
147 eor $t2,$a,$b // a^b, b^c in next round
148 eor $t0,$t0,$T0,ror#$Sigma1[1] // Sigma1(e)
149 ror $T0,$a,#$Sigma0[0]
150 add $h,$h,$t1 // h+=Ch(e,f,g)
151 eor $t1,$a,$a,ror#`$Sigma0[2]-$Sigma0[1]`
152 add $h,$h,$t0 // h+=Sigma1(e)
153 and $t3,$t3,$t2 // (b^c)&=(a^b)
154 add $d,$d,$h // d+=h
155 eor $t3,$t3,$b // Maj(a,b,c)
156 eor $t1,$T0,$t1,ror#$Sigma0[1] // Sigma0(a)
157 add $h,$h,$t3 // h+=Maj(a,b,c)
158 ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round
159 //add $h,$h,$t1 // h+=Sigma0(a)
160 ___
161 $code.=<<___ if ($i>=15);
162 ror $t0,$e,#$Sigma1[0]
163 add $h,$h,$t2 // h+=K[i]
164 ror $T1,@X[($j+1)&15],#$sigma0[0]
165 and $t1,$f,$e
166 ror $T2,@X[($j+14)&15],#$sigma1[0]
167 bic $t2,$g,$e
168 ror $T0,$a,#$Sigma0[0]
169 add $h,$h,@X[$i&15] // h+=X[i]
170 eor $t0,$t0,$e,ror#$Sigma1[1]
171 eor $T1,$T1,@X[($j+1)&15],ror#$sigma0[1]
172 orr $t1,$t1,$t2 // Ch(e,f,g)
173 eor $t2,$a,$b // a^b, b^c in next round
174 eor $t0,$t0,$e,ror#$Sigma1[2] // Sigma1(e)
175 eor $T0,$T0,$a,ror#$Sigma0[1]
176 add $h,$h,$t1 // h+=Ch(e,f,g)
177 and $t3,$t3,$t2 // (b^c)&=(a^b)
178 eor $T2,$T2,@X[($j+14)&15],ror#$sigma1[1]
179 eor $T1,$T1,@X[($j+1)&15],lsr#$sigma0[2] // sigma0(X[i+1])
180 add $h,$h,$t0 // h+=Sigma1(e)
181 eor $t3,$t3,$b // Maj(a,b,c)
182 eor $t1,$T0,$a,ror#$Sigma0[2] // Sigma0(a)
183 eor $T2,$T2,@X[($j+14)&15],lsr#$sigma1[2] // sigma1(X[i+14])
184 add @X[$j],@X[$j],@X[($j+9)&15]
185 add $d,$d,$h // d+=h
186 add $h,$h,$t3 // h+=Maj(a,b,c)
187 ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round
188 add @X[$j],@X[$j],$T1
189 add $h,$h,$t1 // h+=Sigma0(a)
190 add @X[$j],@X[$j],$T2
191 ___
192 ($t2,$t3)=($t3,$t2);
193 }
194
195 $code.=<<___;
196 #ifndef __KERNEL__
197 # include "arm_arch.h"
198 #endif
199
200 .text
201
202 .extern OPENSSL_armcap_P
203 .globl $func
204 .type $func,%function
205 .align 6
206 $func:
207 ___
208 $code.=<<___ if ($SZ==4);
209 #ifndef __KERNEL__
210 # ifdef __ILP32__
211 ldrsw x16,.LOPENSSL_armcap_P
212 # else
213 ldr x16,.LOPENSSL_armcap_P
214 # endif
215 adr x17,.LOPENSSL_armcap_P
216 add x16,x16,x17
217 ldr w16,[x16]
218 tst w16,#ARMV8_SHA256
219 b.ne .Lv8_entry
220 tst w16,#ARMV7_NEON
221 b.ne .Lneon_entry
222 #endif
223 ___
224 $code.=<<___;
225 stp x29,x30,[sp,#-128]!
226 add x29,sp,#0
227
228 stp x19,x20,[sp,#16]
229 stp x21,x22,[sp,#32]
230 stp x23,x24,[sp,#48]
231 stp x25,x26,[sp,#64]
232 stp x27,x28,[sp,#80]
233 sub sp,sp,#4*$SZ
234
235 ldp $A,$B,[$ctx] // load context
236 ldp $C,$D,[$ctx,#2*$SZ]
237 ldp $E,$F,[$ctx,#4*$SZ]
238 add $num,$inp,$num,lsl#`log(16*$SZ)/log(2)` // end of input
239 ldp $G,$H,[$ctx,#6*$SZ]
240 adr $Ktbl,.LK$BITS
241 stp $ctx,$num,[x29,#96]
242
243 .Loop:
244 ldp @X[0],@X[1],[$inp],#2*$SZ
245 ldr $t2,[$Ktbl],#$SZ // *K++
246 eor $t3,$B,$C // magic seed
247 str $inp,[x29,#112]
248 ___
249 for ($i=0;$i<16;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
250 $code.=".Loop_16_xx:\n";
251 for (;$i<32;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
252 $code.=<<___;
253 cbnz $t2,.Loop_16_xx
254
255 ldp $ctx,$num,[x29,#96]
256 ldr $inp,[x29,#112]
257 sub $Ktbl,$Ktbl,#`$SZ*($rounds+1)` // rewind
258
259 ldp @X[0],@X[1],[$ctx]
260 ldp @X[2],@X[3],[$ctx,#2*$SZ]
261 add $inp,$inp,#14*$SZ // advance input pointer
262 ldp @X[4],@X[5],[$ctx,#4*$SZ]
263 add $A,$A,@X[0]
264 ldp @X[6],@X[7],[$ctx,#6*$SZ]
265 add $B,$B,@X[1]
266 add $C,$C,@X[2]
267 add $D,$D,@X[3]
268 stp $A,$B,[$ctx]
269 add $E,$E,@X[4]
270 add $F,$F,@X[5]
271 stp $C,$D,[$ctx,#2*$SZ]
272 add $G,$G,@X[6]
273 add $H,$H,@X[7]
274 cmp $inp,$num
275 stp $E,$F,[$ctx,#4*$SZ]
276 stp $G,$H,[$ctx,#6*$SZ]
277 b.ne .Loop
278
279 ldp x19,x20,[x29,#16]
280 add sp,sp,#4*$SZ
281 ldp x21,x22,[x29,#32]
282 ldp x23,x24,[x29,#48]
283 ldp x25,x26,[x29,#64]
284 ldp x27,x28,[x29,#80]
285 ldp x29,x30,[sp],#128
286 ret
287 .size $func,.-$func
288
289 .align 6
290 .type .LK$BITS,%object
291 .LK$BITS:
292 ___
293 $code.=<<___ if ($SZ==8);
294 .quad 0x428a2f98d728ae22,0x7137449123ef65cd
295 .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
296 .quad 0x3956c25bf348b538,0x59f111f1b605d019
297 .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118
298 .quad 0xd807aa98a3030242,0x12835b0145706fbe
299 .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
300 .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1
301 .quad 0x9bdc06a725c71235,0xc19bf174cf692694
302 .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3
303 .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
304 .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483
305 .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5
306 .quad 0x983e5152ee66dfab,0xa831c66d2db43210
307 .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4
308 .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725
309 .quad 0x06ca6351e003826f,0x142929670a0e6e70
310 .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926
311 .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df
312 .quad 0x650a73548baf63de,0x766a0abb3c77b2a8
313 .quad 0x81c2c92e47edaee6,0x92722c851482353b
314 .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001
315 .quad 0xc24b8b70d0f89791,0xc76c51a30654be30
316 .quad 0xd192e819d6ef5218,0xd69906245565a910
317 .quad 0xf40e35855771202a,0x106aa07032bbd1b8
318 .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53
319 .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
320 .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
321 .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
322 .quad 0x748f82ee5defb2fc,0x78a5636f43172f60
323 .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec
324 .quad 0x90befffa23631e28,0xa4506cebde82bde9
325 .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b
326 .quad 0xca273eceea26619c,0xd186b8c721c0c207
327 .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
328 .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6
329 .quad 0x113f9804bef90dae,0x1b710b35131c471b
330 .quad 0x28db77f523047d84,0x32caab7b40c72493
331 .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
332 .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a
333 .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817
334 .quad 0 // terminator
335 ___
336 $code.=<<___ if ($SZ==4);
337 .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
338 .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
339 .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
340 .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
341 .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
342 .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
343 .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
344 .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
345 .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
346 .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
347 .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
348 .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070
349 .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
350 .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
351 .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
352 .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
353 .long 0 //terminator
354 ___
355 $code.=<<___;
356 .size .LK$BITS,.-.LK$BITS
357 #ifndef __KERNEL__
358 .align 3
359 .LOPENSSL_armcap_P:
360 # ifdef __ILP32__
361 .long OPENSSL_armcap_P-.
362 # else
363 .quad OPENSSL_armcap_P-.
364 # endif
365 #endif
366 .asciz "SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
367 .align 2
368 ___
369
370 if ($SZ==4) {
371 my $Ktbl="x3";
372
373 my ($ABCD,$EFGH,$abcd)=map("v$_.16b",(0..2));
374 my @MSG=map("v$_.16b",(4..7));
375 my ($W0,$W1)=("v16.4s","v17.4s");
376 my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b");
377
378 $code.=<<___;
379 #ifndef __KERNEL__
380 .type sha256_block_armv8,%function
381 .align 6
382 sha256_block_armv8:
383 .Lv8_entry:
384 stp x29,x30,[sp,#-16]!
385 add x29,sp,#0
386
387 ld1.32 {$ABCD,$EFGH},[$ctx]
388 adr $Ktbl,.LK256
389
390 .Loop_hw:
391 ld1 {@MSG[0]-@MSG[3]},[$inp],#64
392 sub $num,$num,#1
393 ld1.32 {$W0},[$Ktbl],#16
394 rev32 @MSG[0],@MSG[0]
395 rev32 @MSG[1],@MSG[1]
396 rev32 @MSG[2],@MSG[2]
397 rev32 @MSG[3],@MSG[3]
398 orr $ABCD_SAVE,$ABCD,$ABCD // offload
399 orr $EFGH_SAVE,$EFGH,$EFGH
400 ___
401 for($i=0;$i<12;$i++) {
402 $code.=<<___;
403 ld1.32 {$W1},[$Ktbl],#16
404 add.i32 $W0,$W0,@MSG[0]
405 sha256su0 @MSG[0],@MSG[1]
406 orr $abcd,$ABCD,$ABCD
407 sha256h $ABCD,$EFGH,$W0
408 sha256h2 $EFGH,$abcd,$W0
409 sha256su1 @MSG[0],@MSG[2],@MSG[3]
410 ___
411 ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG));
412 }
413 $code.=<<___;
414 ld1.32 {$W1},[$Ktbl],#16
415 add.i32 $W0,$W0,@MSG[0]
416 orr $abcd,$ABCD,$ABCD
417 sha256h $ABCD,$EFGH,$W0
418 sha256h2 $EFGH,$abcd,$W0
419
420 ld1.32 {$W0},[$Ktbl],#16
421 add.i32 $W1,$W1,@MSG[1]
422 orr $abcd,$ABCD,$ABCD
423 sha256h $ABCD,$EFGH,$W1
424 sha256h2 $EFGH,$abcd,$W1
425
426 ld1.32 {$W1},[$Ktbl]
427 add.i32 $W0,$W0,@MSG[2]
428 sub $Ktbl,$Ktbl,#$rounds*$SZ-16 // rewind
429 orr $abcd,$ABCD,$ABCD
430 sha256h $ABCD,$EFGH,$W0
431 sha256h2 $EFGH,$abcd,$W0
432
433 add.i32 $W1,$W1,@MSG[3]
434 orr $abcd,$ABCD,$ABCD
435 sha256h $ABCD,$EFGH,$W1
436 sha256h2 $EFGH,$abcd,$W1
437
438 add.i32 $ABCD,$ABCD,$ABCD_SAVE
439 add.i32 $EFGH,$EFGH,$EFGH_SAVE
440
441 cbnz $num,.Loop_hw
442
443 st1.32 {$ABCD,$EFGH},[$ctx]
444
445 ldr x29,[sp],#16
446 ret
447 .size sha256_block_armv8,.-sha256_block_armv8
448 #endif
449 ___
450 }
451
452 if ($SZ==4) { ######################################### NEON stuff #
453 # You'll surely note a lot of similarities with sha256-armv4 module,
454 # and of course it's not a coincidence. sha256-armv4 was used as
455 # initial template, but was adapted for ARMv8 instruction set and
456 # extensively re-tuned for all-round performance.
457
458 my @V = ($A,$B,$C,$D,$E,$F,$G,$H) = map("w$_",(3..10));
459 my ($t0,$t1,$t2,$t3,$t4) = map("w$_",(11..15));
460 my $Ktbl="x16";
461 my $Xfer="x17";
462 my @X = map("q$_",(0..3));
463 my ($T0,$T1,$T2,$T3,$T4,$T5,$T6,$T7) = map("q$_",(4..7,16..19));
464 my $j=0;
465
466 sub AUTOLOAD() # thunk [simplified] x86-style perlasm
467 { my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
468 my $arg = pop;
469 $arg = "#$arg" if ($arg*1 eq $arg);
470 $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
471 }
472
473 sub Dscalar { shift =~ m|[qv]([0-9]+)|?"d$1":""; }
474 sub Dlo { shift =~ m|[qv]([0-9]+)|?"v$1.d[0]":""; }
475 sub Dhi { shift =~ m|[qv]([0-9]+)|?"v$1.d[1]":""; }
476
477 sub Xupdate()
478 { use integer;
479 my $body = shift;
480 my @insns = (&$body,&$body,&$body,&$body);
481 my ($a,$b,$c,$d,$e,$f,$g,$h);
482
483 &ext_8 ($T0,@X[0],@X[1],4); # X[1..4]
484 eval(shift(@insns));
485 eval(shift(@insns));
486 eval(shift(@insns));
487 &ext_8 ($T3,@X[2],@X[3],4); # X[9..12]
488 eval(shift(@insns));
489 eval(shift(@insns));
490 &mov (&Dscalar($T7),&Dhi(@X[3])); # X[14..15]
491 eval(shift(@insns));
492 eval(shift(@insns));
493 &ushr_32 ($T2,$T0,$sigma0[0]);
494 eval(shift(@insns));
495 &ushr_32 ($T1,$T0,$sigma0[2]);
496 eval(shift(@insns));
497 &add_32 (@X[0],@X[0],$T3); # X[0..3] += X[9..12]
498 eval(shift(@insns));
499 &sli_32 ($T2,$T0,32-$sigma0[0]);
500 eval(shift(@insns));
501 eval(shift(@insns));
502 &ushr_32 ($T3,$T0,$sigma0[1]);
503 eval(shift(@insns));
504 eval(shift(@insns));
505 &eor_8 ($T1,$T1,$T2);
506 eval(shift(@insns));
507 eval(shift(@insns));
508 &sli_32 ($T3,$T0,32-$sigma0[1]);
509 eval(shift(@insns));
510 eval(shift(@insns));
511 &ushr_32 ($T4,$T7,$sigma1[0]);
512 eval(shift(@insns));
513 eval(shift(@insns));
514 &eor_8 ($T1,$T1,$T3); # sigma0(X[1..4])
515 eval(shift(@insns));
516 eval(shift(@insns));
517 &sli_32 ($T4,$T7,32-$sigma1[0]);
518 eval(shift(@insns));
519 eval(shift(@insns));
520 &ushr_32 ($T5,$T7,$sigma1[2]);
521 eval(shift(@insns));
522 eval(shift(@insns));
523 &ushr_32 ($T3,$T7,$sigma1[1]);
524 eval(shift(@insns));
525 eval(shift(@insns));
526 &add_32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4])
527 eval(shift(@insns));
528 eval(shift(@insns));
529 &sli_u32 ($T3,$T7,32-$sigma1[1]);
530 eval(shift(@insns));
531 eval(shift(@insns));
532 &eor_8 ($T5,$T5,$T4);
533 eval(shift(@insns));
534 eval(shift(@insns));
535 eval(shift(@insns));
536 &eor_8 ($T5,$T5,$T3); # sigma1(X[14..15])
537 eval(shift(@insns));
538 eval(shift(@insns));
539 eval(shift(@insns));
540 &add_32 (@X[0],@X[0],$T5); # X[0..1] += sigma1(X[14..15])
541 eval(shift(@insns));
542 eval(shift(@insns));
543 eval(shift(@insns));
544 &ushr_32 ($T6,@X[0],$sigma1[0]);
545 eval(shift(@insns));
546 &ushr_32 ($T7,@X[0],$sigma1[2]);
547 eval(shift(@insns));
548 eval(shift(@insns));
549 &sli_32 ($T6,@X[0],32-$sigma1[0]);
550 eval(shift(@insns));
551 &ushr_32 ($T5,@X[0],$sigma1[1]);
552 eval(shift(@insns));
553 eval(shift(@insns));
554 &eor_8 ($T7,$T7,$T6);
555 eval(shift(@insns));
556 eval(shift(@insns));
557 &sli_32 ($T5,@X[0],32-$sigma1[1]);
558 eval(shift(@insns));
559 eval(shift(@insns));
560 &ld1_32 ("{$T0}","[$Ktbl], #16");
561 eval(shift(@insns));
562 &eor_8 ($T7,$T7,$T5); # sigma1(X[16..17])
563 eval(shift(@insns));
564 eval(shift(@insns));
565 &eor_8 ($T5,$T5,$T5);
566 eval(shift(@insns));
567 eval(shift(@insns));
568 &mov (&Dhi($T5), &Dlo($T7));
569 eval(shift(@insns));
570 eval(shift(@insns));
571 eval(shift(@insns));
572 &add_32 (@X[0],@X[0],$T5); # X[2..3] += sigma1(X[16..17])
573 eval(shift(@insns));
574 eval(shift(@insns));
575 eval(shift(@insns));
576 &add_32 ($T0,$T0,@X[0]);
577 while($#insns>=1) { eval(shift(@insns)); }
578 &st1_32 ("{$T0}","[$Xfer], #16");
579 eval(shift(@insns));
580
581 push(@X,shift(@X)); # "rotate" X[]
582 }
583
584 sub Xpreload()
585 { use integer;
586 my $body = shift;
587 my @insns = (&$body,&$body,&$body,&$body);
588 my ($a,$b,$c,$d,$e,$f,$g,$h);
589
590 eval(shift(@insns));
591 eval(shift(@insns));
592 &ld1_8 ("{@X[0]}","[$inp],#16");
593 eval(shift(@insns));
594 eval(shift(@insns));
595 &ld1_32 ("{$T0}","[$Ktbl],#16");
596 eval(shift(@insns));
597 eval(shift(@insns));
598 eval(shift(@insns));
599 eval(shift(@insns));
600 &rev32 (@X[0],@X[0]);
601 eval(shift(@insns));
602 eval(shift(@insns));
603 eval(shift(@insns));
604 eval(shift(@insns));
605 &add_32 ($T0,$T0,@X[0]);
606 foreach (@insns) { eval; } # remaining instructions
607 &st1_32 ("{$T0}","[$Xfer], #16");
608
609 push(@X,shift(@X)); # "rotate" X[]
610 }
611
612 sub body_00_15 () {
613 (
614 '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
615 '&add ($h,$h,$t1)', # h+=X[i]+K[i]
616 '&add ($a,$a,$t4);'. # h+=Sigma0(a) from the past
617 '&and ($t1,$f,$e)',
618 '&bic ($t4,$g,$e)',
619 '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
620 '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past
621 '&orr ($t1,$t1,$t4)', # Ch(e,f,g)
622 '&eor ($t0,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e)
623 '&eor ($t4,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
624 '&add ($h,$h,$t1)', # h+=Ch(e,f,g)
625 '&ror ($t0,$t0,"#$Sigma1[0]")',
626 '&eor ($t2,$a,$b)', # a^b, b^c in next round
627 '&eor ($t4,$t4,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a)
628 '&add ($h,$h,$t0)', # h+=Sigma1(e)
629 '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'.
630 '&ldr ($t1,"[$Ktbl]") if ($j==15);'.
631 '&and ($t3,$t3,$t2)', # (b^c)&=(a^b)
632 '&ror ($t4,$t4,"#$Sigma0[0]")',
633 '&add ($d,$d,$h)', # d+=h
634 '&eor ($t3,$t3,$b)', # Maj(a,b,c)
635 '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
636 )
637 }
638
639 $code.=<<___;
640 #ifdef __KERNEL__
641 .globl sha256_block_neon
642 #endif
643 .type sha256_block_neon,%function
644 .align 4
645 sha256_block_neon:
646 .Lneon_entry:
647 stp x29, x30, [sp, #-16]!
648 mov x29, sp
649 sub sp,sp,#16*4
650
651 adr $Ktbl,.LK256
652 add $num,$inp,$num,lsl#6 // len to point at the end of inp
653
654 ld1.8 {@X[0]},[$inp], #16
655 ld1.8 {@X[1]},[$inp], #16
656 ld1.8 {@X[2]},[$inp], #16
657 ld1.8 {@X[3]},[$inp], #16
658 ld1.32 {$T0},[$Ktbl], #16
659 ld1.32 {$T1},[$Ktbl], #16
660 ld1.32 {$T2},[$Ktbl], #16
661 ld1.32 {$T3},[$Ktbl], #16
662 rev32 @X[0],@X[0] // yes, even on
663 rev32 @X[1],@X[1] // big-endian
664 rev32 @X[2],@X[2]
665 rev32 @X[3],@X[3]
666 mov $Xfer,sp
667 add.32 $T0,$T0,@X[0]
668 add.32 $T1,$T1,@X[1]
669 add.32 $T2,$T2,@X[2]
670 st1.32 {$T0-$T1},[$Xfer], #32
671 add.32 $T3,$T3,@X[3]
672 st1.32 {$T2-$T3},[$Xfer]
673 sub $Xfer,$Xfer,#32
674
675 ldp $A,$B,[$ctx]
676 ldp $C,$D,[$ctx,#8]
677 ldp $E,$F,[$ctx,#16]
678 ldp $G,$H,[$ctx,#24]
679 ldr $t1,[sp,#0]
680 mov $t2,wzr
681 eor $t3,$B,$C
682 mov $t4,wzr
683 b .L_00_48
684
685 .align 4
686 .L_00_48:
687 ___
688 &Xupdate(\&body_00_15);
689 &Xupdate(\&body_00_15);
690 &Xupdate(\&body_00_15);
691 &Xupdate(\&body_00_15);
692 $code.=<<___;
693 cmp $t1,#0 // check for K256 terminator
694 ldr $t1,[sp,#0]
695 sub $Xfer,$Xfer,#64
696 bne .L_00_48
697
698 sub $Ktbl,$Ktbl,#256 // rewind $Ktbl
699 cmp $inp,$num
700 mov $Xfer, #64
701 csel $Xfer, $Xfer, xzr, eq
702 sub $inp,$inp,$Xfer // avoid SEGV
703 mov $Xfer,sp
704 ___
705 &Xpreload(\&body_00_15);
706 &Xpreload(\&body_00_15);
707 &Xpreload(\&body_00_15);
708 &Xpreload(\&body_00_15);
709 $code.=<<___;
710 add $A,$A,$t4 // h+=Sigma0(a) from the past
711 ldp $t0,$t1,[$ctx,#0]
712 add $A,$A,$t2 // h+=Maj(a,b,c) from the past
713 ldp $t2,$t3,[$ctx,#8]
714 add $A,$A,$t0 // accumulate
715 add $B,$B,$t1
716 ldp $t0,$t1,[$ctx,#16]
717 add $C,$C,$t2
718 add $D,$D,$t3
719 ldp $t2,$t3,[$ctx,#24]
720 add $E,$E,$t0
721 add $F,$F,$t1
722 ldr $t1,[sp,#0]
723 stp $A,$B,[$ctx,#0]
724 add $G,$G,$t2
725 mov $t2,wzr
726 stp $C,$D,[$ctx,#8]
727 add $H,$H,$t3
728 stp $E,$F,[$ctx,#16]
729 eor $t3,$B,$C
730 stp $G,$H,[$ctx,#24]
731 mov $t4,wzr
732 mov $Xfer,sp
733 b.ne .L_00_48
734
735 ldr x29,[x29]
736 add sp,sp,#16*4+16
737 ret
738 .size sha256_block_neon,.-sha256_block_neon
739 ___
740 }
741
742 $code.=<<___;
743 #ifndef __KERNEL__
744 .comm OPENSSL_armcap_P,4,4
745 #endif
746 ___
747
748 { my %opcode = (
749 "sha256h" => 0x5e004000, "sha256h2" => 0x5e005000,
750 "sha256su0" => 0x5e282800, "sha256su1" => 0x5e006000 );
751
752 sub unsha256 {
753 my ($mnemonic,$arg)=@_;
754
755 $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
756 &&
757 sprintf ".inst\t0x%08x\t//%s %s",
758 $opcode{$mnemonic}|$1|($2<<5)|($3<<16),
759 $mnemonic,$arg;
760 }
761 }
762
763 open SELF,$0;
764 while(<SELF>) {
765 next if (/^#!/);
766 last if (!s/^#/\/\// and !/^$/);
767 print;
768 }
769 close SELF;
770
771 foreach(split("\n",$code)) {
772
773 s/\`([^\`]*)\`/eval($1)/ge;
774
775 s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge;
776
777 s/\bq([0-9]+)\b/v$1.16b/g; # old->new registers
778
779 s/\.[ui]?8(\s)/$1/;
780 s/\.\w?32\b// and s/\.16b/\.4s/g;
781 m/(ld|st)1[^\[]+\[0\]/ and s/\.4s/\.s/g;
782
783 print $_,"\n";
784 }
785
786 close STDOUT;
Linux with added FPC-III support