?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'for-linus-20190706' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / message / fusion / mptbase.c
blobd8882b0a13388ae213bb869ca782bc61d975ca65
1 /*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13 /*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46 */
47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49 #include <linux/kernel.h>
50 #include <linux/module.h>
51 #include <linux/errno.h>
52 #include <linux/init.h>
53 #include <linux/seq_file.h>
54 #include <linux/slab.h>
55 #include <linux/types.h>
56 #include <linux/pci.h>
57 #include <linux/kdev_t.h>
58 #include <linux/blkdev.h>
59 #include <linux/delay.h>
60 #include <linux/interrupt.h> /* needed for in_interrupt() proto */
61 #include <linux/dma-mapping.h>
62 #include <linux/kthread.h>
63 #include <scsi/scsi_host.h>
64
65 #include "mptbase.h"
66 #include "lsi/mpi_log_fc.h"
67
68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69 #define my_NAME "Fusion MPT base driver"
70 #define my_VERSION MPT_LINUX_VERSION_COMMON
71 #define MYNAM "mptbase"
72
73 MODULE_AUTHOR(MODULEAUTHOR);
74 MODULE_DESCRIPTION(my_NAME);
75 MODULE_LICENSE("GPL");
76 MODULE_VERSION(my_VERSION);
77
78 /*
79 * cmd line parameters
80 */
81
82 static int mpt_msi_enable_spi;
83 module_param(mpt_msi_enable_spi, int, 0);
84 MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87 static int mpt_msi_enable_fc;
88 module_param(mpt_msi_enable_fc, int, 0);
89 MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92 static int mpt_msi_enable_sas;
93 module_param(mpt_msi_enable_sas, int, 0);
94 MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97 static int mpt_channel_mapping;
98 module_param(mpt_channel_mapping, int, 0);
99 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101 static int mpt_debug_level;
102 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp);
103 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105 MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108 int mpt_fwfault_debug;
109 EXPORT_SYMBOL(mpt_fwfault_debug);
110 module_param(mpt_fwfault_debug, int, 0600);
111 MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114 static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117 #ifdef MFCNT
118 static int mfcounter = 0;
119 #define PRINT_MF_COUNT 20000
120 #endif
121
122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123 /*
124 * Public data...
125 */
126
127 #define WHOINIT_UNKNOWN 0xAA
128
129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130 /*
131 * Private data...
132 */
133 /* Adapter link list */
134 LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145 #ifdef CONFIG_PROC_FS
146 static struct proc_dir_entry *mpt_proc_root_dir;
147 #endif
148
149 /*
150 * Driver Callback Index's
151 */
152 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153 static u8 last_drv_idx;
154
155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156 /*
157 * Forward protos...
158 */
159 static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160 static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167 static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168 static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177 static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181 static int PrimeIocFifos(MPT_ADAPTER *ioc);
182 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185 static int GetLanConfigPages(MPT_ADAPTER *ioc);
186 static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187 int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192 static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196 static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197 static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199 #ifdef CONFIG_PROC_FS
200 static int mpt_summary_proc_show(struct seq_file *m, void *v);
201 static int mpt_version_proc_show(struct seq_file *m, void *v);
202 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v);
203 #endif
204 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206 static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208 static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210 static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211 static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212 static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213 static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215 /* module entry point */
216 static int __init fusion_init (void);
217 static void __exit fusion_exit (void);
218
219 #define CHIPREG_READ32(addr) readl_relaxed(addr)
220 #define CHIPREG_READ32_dmasync(addr) readl(addr)
221 #define CHIPREG_WRITE32(addr,val) writel(val, addr)
222 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225 static void
226 pci_disable_io_access(struct pci_dev *pdev)
227 {
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233 }
234
235 static void
236 pci_enable_io_access(struct pci_dev *pdev)
237 {
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243 }
244
245 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp)
246 {
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256 }
257
258 /**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264 static u8
265 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266 {
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273 }
274
275 /**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281 static int
282 mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283 {
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
304 &dma_handle);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
320 buffer, dma_handle);
321 out:
322 return rc;
323 }
324
325
326 /**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333 static int mpt_remove_dead_ioc_func(void *arg)
334 {
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if (!ioc)
339 return -1;
340
341 pdev = ioc->pcidev;
342 if (!pdev)
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347 }
348
349
350
351 /**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355 **/
356 static void
357 mpt_fault_reset_work(struct work_struct *work)
358 {
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436 }
437
438
439 /*
440 * Process turbo (context) reply...
441 */
442 static void
443 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444 {
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 break;
477 }
478 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
479 break;
480 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
481 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
483 break;
484 default:
485 cb_idx = 0;
486 BUG();
487 }
488
489 /* Check for (valid) IO callback! */
490 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
491 MptCallbacks[cb_idx] == NULL) {
492 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
493 __func__, ioc->name, cb_idx);
494 goto out;
495 }
496
497 if (MptCallbacks[cb_idx](ioc, mf, mr))
498 mpt_free_msg_frame(ioc, mf);
499 out:
500 mb();
501 }
502
503 static void
504 mpt_reply(MPT_ADAPTER *ioc, u32 pa)
505 {
506 MPT_FRAME_HDR *mf;
507 MPT_FRAME_HDR *mr;
508 u16 req_idx;
509 u8 cb_idx;
510 int freeme;
511
512 u32 reply_dma_low;
513 u16 ioc_stat;
514
515 /* non-TURBO reply! Hmmm, something may be up...
516 * Newest turbo reply mechanism; get address
517 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
518 */
519
520 /* Map DMA address of reply header to cpu address.
521 * pa is 32 bits - but the dma address may be 32 or 64 bits
522 * get offset based only only the low addresses
523 */
524
525 reply_dma_low = (pa <<= 1);
526 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
527 (reply_dma_low - ioc->reply_frames_low_dma));
528
529 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
530 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
531 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
532
533 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
534 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
535 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
536
537 /* Check/log IOC log info
538 */
539 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
540 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
541 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
542 if (ioc->bus_type == FC)
543 mpt_fc_log_info(ioc, log_info);
544 else if (ioc->bus_type == SPI)
545 mpt_spi_log_info(ioc, log_info);
546 else if (ioc->bus_type == SAS)
547 mpt_sas_log_info(ioc, log_info, cb_idx);
548 }
549
550 if (ioc_stat & MPI_IOCSTATUS_MASK)
551 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
552
553 /* Check for (valid) IO callback! */
554 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
555 MptCallbacks[cb_idx] == NULL) {
556 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
557 __func__, ioc->name, cb_idx);
558 freeme = 0;
559 goto out;
560 }
561
562 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
563
564 out:
565 /* Flush (non-TURBO) reply with a WRITE! */
566 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
567
568 if (freeme)
569 mpt_free_msg_frame(ioc, mf);
570 mb();
571 }
572
573 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
574 /**
575 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
576 * @irq: irq number (not used)
577 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
578 *
579 * This routine is registered via the request_irq() kernel API call,
580 * and handles all interrupts generated from a specific MPT adapter
581 * (also referred to as a IO Controller or IOC).
582 * This routine must clear the interrupt from the adapter and does
583 * so by reading the reply FIFO. Multiple replies may be processed
584 * per single call to this routine.
585 *
586 * This routine handles register-level access of the adapter but
587 * dispatches (calls) a protocol-specific callback routine to handle
588 * the protocol-specific details of the MPT request completion.
589 */
590 static irqreturn_t
591 mpt_interrupt(int irq, void *bus_id)
592 {
593 MPT_ADAPTER *ioc = bus_id;
594 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
595
596 if (pa == 0xFFFFFFFF)
597 return IRQ_NONE;
598
599 /*
600 * Drain the reply FIFO!
601 */
602 do {
603 if (pa & MPI_ADDRESS_REPLY_A_BIT)
604 mpt_reply(ioc, pa);
605 else
606 mpt_turbo_reply(ioc, pa);
607 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
608 } while (pa != 0xFFFFFFFF);
609
610 return IRQ_HANDLED;
611 }
612
613 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
614 /**
615 * mptbase_reply - MPT base driver's callback routine
616 * @ioc: Pointer to MPT_ADAPTER structure
617 * @req: Pointer to original MPT request frame
618 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
619 *
620 * MPT base driver's callback routine; all base driver
621 * "internal" request/reply processing is routed here.
622 * Currently used for EventNotification and EventAck handling.
623 *
624 * Returns 1 indicating original alloc'd request frame ptr
625 * should be freed, or 0 if it shouldn't.
626 */
627 static int
628 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
629 {
630 EventNotificationReply_t *pEventReply;
631 u8 event;
632 int evHandlers;
633 int freereq = 1;
634
635 switch (reply->u.hdr.Function) {
636 case MPI_FUNCTION_EVENT_NOTIFICATION:
637 pEventReply = (EventNotificationReply_t *)reply;
638 evHandlers = 0;
639 ProcessEventNotification(ioc, pEventReply, &evHandlers);
640 event = le32_to_cpu(pEventReply->Event) & 0xFF;
641 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
642 freereq = 0;
643 if (event != MPI_EVENT_EVENT_CHANGE)
644 break;
645 /* fall through */
646 case MPI_FUNCTION_CONFIG:
647 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
649 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
650 memcpy(ioc->mptbase_cmds.reply, reply,
651 min(MPT_DEFAULT_FRAME_SIZE,
652 4 * reply->u.reply.MsgLength));
653 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
654 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
655 complete(&ioc->mptbase_cmds.done);
656 } else
657 freereq = 0;
658 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
659 freereq = 1;
660 break;
661 case MPI_FUNCTION_EVENT_ACK:
662 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
663 "EventAck reply received\n", ioc->name));
664 break;
665 default:
666 printk(MYIOC_s_ERR_FMT
667 "Unexpected msg function (=%02Xh) reply received!\n",
668 ioc->name, reply->u.hdr.Function);
669 break;
670 }
671
672 /*
673 * Conditionally tell caller to free the original
674 * EventNotification/EventAck/unexpected request frame!
675 */
676 return freereq;
677 }
678
679 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
680 /**
681 * mpt_register - Register protocol-specific main callback handler.
682 * @cbfunc: callback function pointer
683 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
684 * @func_name: call function's name
685 *
686 * This routine is called by a protocol-specific driver (SCSI host,
687 * LAN, SCSI target) to register its reply callback routine. Each
688 * protocol-specific driver must do this before it will be able to
689 * use any IOC resources, such as obtaining request frames.
690 *
691 * NOTES: The SCSI protocol driver currently calls this routine thrice
692 * in order to register separate callbacks; one for "normal" SCSI IO;
693 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
694 *
695 * Returns u8 valued "handle" in the range (and S.O.D. order)
696 * {N,...,7,6,5,...,1} if successful.
697 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
698 * considered an error by the caller.
699 */
700 u8
701 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
702 {
703 u8 cb_idx;
704 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
705
706 /*
707 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
708 * (slot/handle 0 is reserved!)
709 */
710 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
711 if (MptCallbacks[cb_idx] == NULL) {
712 MptCallbacks[cb_idx] = cbfunc;
713 MptDriverClass[cb_idx] = dclass;
714 MptEvHandlers[cb_idx] = NULL;
715 last_drv_idx = cb_idx;
716 strlcpy(MptCallbacksName[cb_idx], func_name,
717 MPT_MAX_CALLBACKNAME_LEN+1);
718 break;
719 }
720 }
721
722 return last_drv_idx;
723 }
724
725 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
726 /**
727 * mpt_deregister - Deregister a protocol drivers resources.
728 * @cb_idx: previously registered callback handle
729 *
730 * Each protocol-specific driver should call this routine when its
731 * module is unloaded.
732 */
733 void
734 mpt_deregister(u8 cb_idx)
735 {
736 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
737 MptCallbacks[cb_idx] = NULL;
738 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
739 MptEvHandlers[cb_idx] = NULL;
740
741 last_drv_idx++;
742 }
743 }
744
745 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
746 /**
747 * mpt_event_register - Register protocol-specific event callback handler.
748 * @cb_idx: previously registered (via mpt_register) callback handle
749 * @ev_cbfunc: callback function
750 *
751 * This routine can be called by one or more protocol-specific drivers
752 * if/when they choose to be notified of MPT events.
753 *
754 * Returns 0 for success.
755 */
756 int
757 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
758 {
759 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
760 return -1;
761
762 MptEvHandlers[cb_idx] = ev_cbfunc;
763 return 0;
764 }
765
766 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
767 /**
768 * mpt_event_deregister - Deregister protocol-specific event callback handler
769 * @cb_idx: previously registered callback handle
770 *
771 * Each protocol-specific driver should call this routine
772 * when it does not (or can no longer) handle events,
773 * or when its module is unloaded.
774 */
775 void
776 mpt_event_deregister(u8 cb_idx)
777 {
778 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
779 return;
780
781 MptEvHandlers[cb_idx] = NULL;
782 }
783
784 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
785 /**
786 * mpt_reset_register - Register protocol-specific IOC reset handler.
787 * @cb_idx: previously registered (via mpt_register) callback handle
788 * @reset_func: reset function
789 *
790 * This routine can be called by one or more protocol-specific drivers
791 * if/when they choose to be notified of IOC resets.
792 *
793 * Returns 0 for success.
794 */
795 int
796 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
797 {
798 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
799 return -1;
800
801 MptResetHandlers[cb_idx] = reset_func;
802 return 0;
803 }
804
805 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
806 /**
807 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
808 * @cb_idx: previously registered callback handle
809 *
810 * Each protocol-specific driver should call this routine
811 * when it does not (or can no longer) handle IOC reset handling,
812 * or when its module is unloaded.
813 */
814 void
815 mpt_reset_deregister(u8 cb_idx)
816 {
817 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
818 return;
819
820 MptResetHandlers[cb_idx] = NULL;
821 }
822
823 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
824 /**
825 * mpt_device_driver_register - Register device driver hooks
826 * @dd_cbfunc: driver callbacks struct
827 * @cb_idx: MPT protocol driver index
828 */
829 int
830 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
831 {
832 MPT_ADAPTER *ioc;
833 const struct pci_device_id *id;
834
835 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
836 return -EINVAL;
837
838 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
839
840 /* call per pci device probe entry point */
841 list_for_each_entry(ioc, &ioc_list, list) {
842 id = ioc->pcidev->driver ?
843 ioc->pcidev->driver->id_table : NULL;
844 if (dd_cbfunc->probe)
845 dd_cbfunc->probe(ioc->pcidev, id);
846 }
847
848 return 0;
849 }
850
851 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
852 /**
853 * mpt_device_driver_deregister - DeRegister device driver hooks
854 * @cb_idx: MPT protocol driver index
855 */
856 void
857 mpt_device_driver_deregister(u8 cb_idx)
858 {
859 struct mpt_pci_driver *dd_cbfunc;
860 MPT_ADAPTER *ioc;
861
862 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
863 return;
864
865 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
866
867 list_for_each_entry(ioc, &ioc_list, list) {
868 if (dd_cbfunc->remove)
869 dd_cbfunc->remove(ioc->pcidev);
870 }
871
872 MptDeviceDriverHandlers[cb_idx] = NULL;
873 }
874
875
876 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
877 /**
878 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
879 * @cb_idx: Handle of registered MPT protocol driver
880 * @ioc: Pointer to MPT adapter structure
881 *
882 * Obtain an MPT request frame from the pool (of 1024) that are
883 * allocated per MPT adapter.
884 *
885 * Returns pointer to a MPT request frame or %NULL if none are available
886 * or IOC is not active.
887 */
888 MPT_FRAME_HDR*
889 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
890 {
891 MPT_FRAME_HDR *mf;
892 unsigned long flags;
893 u16 req_idx; /* Request index */
894
895 /* validate handle and ioc identifier */
896
897 #ifdef MFCNT
898 if (!ioc->active)
899 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
900 "returning NULL!\n", ioc->name);
901 #endif
902
903 /* If interrupts are not attached, do not return a request frame */
904 if (!ioc->active)
905 return NULL;
906
907 spin_lock_irqsave(&ioc->FreeQlock, flags);
908 if (!list_empty(&ioc->FreeQ)) {
909 int req_offset;
910
911 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
912 u.frame.linkage.list);
913 list_del(&mf->u.frame.linkage.list);
914 mf->u.frame.linkage.arg1 = 0;
915 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
916 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
917 /* u16! */
918 req_idx = req_offset / ioc->req_sz;
919 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
920 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
921 /* Default, will be changed if necessary in SG generation */
922 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
923 #ifdef MFCNT
924 ioc->mfcnt++;
925 #endif
926 }
927 else
928 mf = NULL;
929 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
930
931 #ifdef MFCNT
932 if (mf == NULL)
933 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
934 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
935 ioc->req_depth);
936 mfcounter++;
937 if (mfcounter == PRINT_MF_COUNT)
938 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
939 ioc->mfcnt, ioc->req_depth);
940 #endif
941
942 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
943 ioc->name, cb_idx, ioc->id, mf));
944 return mf;
945 }
946
947 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
948 /**
949 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
950 * @cb_idx: Handle of registered MPT protocol driver
951 * @ioc: Pointer to MPT adapter structure
952 * @mf: Pointer to MPT request frame
953 *
954 * This routine posts an MPT request frame to the request post FIFO of a
955 * specific MPT adapter.
956 */
957 void
958 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
959 {
960 u32 mf_dma_addr;
961 int req_offset;
962 u16 req_idx; /* Request index */
963
964 /* ensure values are reset properly! */
965 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
966 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
967 /* u16! */
968 req_idx = req_offset / ioc->req_sz;
969 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
970 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
971
972 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
973
974 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
975 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
976 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
977 ioc->RequestNB[req_idx]));
978 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
979 }
980
981 /**
982 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
983 * @cb_idx: Handle of registered MPT protocol driver
984 * @ioc: Pointer to MPT adapter structure
985 * @mf: Pointer to MPT request frame
986 *
987 * Send a protocol-specific MPT request frame to an IOC using
988 * hi-priority request queue.
989 *
990 * This routine posts an MPT request frame to the request post FIFO of a
991 * specific MPT adapter.
992 **/
993 void
994 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
995 {
996 u32 mf_dma_addr;
997 int req_offset;
998 u16 req_idx; /* Request index */
999
1000 /* ensure values are reset properly! */
1001 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1002 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1003 req_idx = req_offset / ioc->req_sz;
1004 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1005 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1006
1007 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1008
1009 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1010 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1011 ioc->name, mf_dma_addr, req_idx));
1012 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1013 }
1014
1015 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1016 /**
1017 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1018 * @ioc: Pointer to MPT adapter structure
1019 * @mf: Pointer to MPT request frame
1020 *
1021 * This routine places a MPT request frame back on the MPT adapter's
1022 * FreeQ.
1023 */
1024 void
1025 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1026 {
1027 unsigned long flags;
1028
1029 /* Put Request back on FreeQ! */
1030 spin_lock_irqsave(&ioc->FreeQlock, flags);
1031 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1032 goto out;
1033 /* signature to know if this mf is freed */
1034 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1035 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1036 #ifdef MFCNT
1037 ioc->mfcnt--;
1038 #endif
1039 out:
1040 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1041 }
1042
1043 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1044 /**
1045 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1046 * @pAddr: virtual address for SGE
1047 * @flagslength: SGE flags and data transfer length
1048 * @dma_addr: Physical address
1049 *
1050 * This routine places a MPT request frame back on the MPT adapter's
1051 * FreeQ.
1052 */
1053 static void
1054 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1055 {
1056 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1057 pSge->FlagsLength = cpu_to_le32(flagslength);
1058 pSge->Address = cpu_to_le32(dma_addr);
1059 }
1060
1061 /**
1062 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1063 * @pAddr: virtual address for SGE
1064 * @flagslength: SGE flags and data transfer length
1065 * @dma_addr: Physical address
1066 *
1067 * This routine places a MPT request frame back on the MPT adapter's
1068 * FreeQ.
1069 **/
1070 static void
1071 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1072 {
1073 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1074 pSge->Address.Low = cpu_to_le32
1075 (lower_32_bits(dma_addr));
1076 pSge->Address.High = cpu_to_le32
1077 (upper_32_bits(dma_addr));
1078 pSge->FlagsLength = cpu_to_le32
1079 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1080 }
1081
1082 /**
1083 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1084 * @pAddr: virtual address for SGE
1085 * @flagslength: SGE flags and data transfer length
1086 * @dma_addr: Physical address
1087 *
1088 * This routine places a MPT request frame back on the MPT adapter's
1089 * FreeQ.
1090 **/
1091 static void
1092 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1093 {
1094 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1095 u32 tmp;
1096
1097 pSge->Address.Low = cpu_to_le32
1098 (lower_32_bits(dma_addr));
1099 tmp = (u32)(upper_32_bits(dma_addr));
1100
1101 /*
1102 * 1078 errata workaround for the 36GB limitation
1103 */
1104 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1105 flagslength |=
1106 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1107 tmp |= (1<<31);
1108 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1109 printk(KERN_DEBUG "1078 P0M2 addressing for "
1110 "addr = 0x%llx len = %d\n",
1111 (unsigned long long)dma_addr,
1112 MPI_SGE_LENGTH(flagslength));
1113 }
1114
1115 pSge->Address.High = cpu_to_le32(tmp);
1116 pSge->FlagsLength = cpu_to_le32(
1117 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1118 }
1119
1120 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1121 /**
1122 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1123 * @pAddr: virtual address for SGE
1124 * @next: nextChainOffset value (u32's)
1125 * @length: length of next SGL segment
1126 * @dma_addr: Physical address
1127 *
1128 */
1129 static void
1130 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1131 {
1132 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1133
1134 pChain->Length = cpu_to_le16(length);
1135 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1136 pChain->NextChainOffset = next;
1137 pChain->Address = cpu_to_le32(dma_addr);
1138 }
1139
1140 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1141 /**
1142 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1143 * @pAddr: virtual address for SGE
1144 * @next: nextChainOffset value (u32's)
1145 * @length: length of next SGL segment
1146 * @dma_addr: Physical address
1147 *
1148 */
1149 static void
1150 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1151 {
1152 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1153 u32 tmp = dma_addr & 0xFFFFFFFF;
1154
1155 pChain->Length = cpu_to_le16(length);
1156 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1157 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1158
1159 pChain->NextChainOffset = next;
1160
1161 pChain->Address.Low = cpu_to_le32(tmp);
1162 tmp = (u32)(upper_32_bits(dma_addr));
1163 pChain->Address.High = cpu_to_le32(tmp);
1164 }
1165
1166 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1167 /**
1168 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1169 * @cb_idx: Handle of registered MPT protocol driver
1170 * @ioc: Pointer to MPT adapter structure
1171 * @reqBytes: Size of the request in bytes
1172 * @req: Pointer to MPT request frame
1173 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1174 *
1175 * This routine is used exclusively to send MptScsiTaskMgmt
1176 * requests since they are required to be sent via doorbell handshake.
1177 *
1178 * NOTE: It is the callers responsibility to byte-swap fields in the
1179 * request which are greater than 1 byte in size.
1180 *
1181 * Returns 0 for success, non-zero for failure.
1182 */
1183 int
1184 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1185 {
1186 int r = 0;
1187 u8 *req_as_bytes;
1188 int ii;
1189
1190 /* State is known to be good upon entering
1191 * this function so issue the bus reset
1192 * request.
1193 */
1194
1195 /*
1196 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1197 * setting cb_idx/req_idx. But ONLY if this request
1198 * is in proper (pre-alloc'd) request buffer range...
1199 */
1200 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1201 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1202 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1203 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1204 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1205 }
1206
1207 /* Make sure there are no doorbells */
1208 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1209
1210 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1211 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1212 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1213
1214 /* Wait for IOC doorbell int */
1215 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1216 return ii;
1217 }
1218
1219 /* Read doorbell and check for active bit */
1220 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1221 return -5;
1222
1223 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1224 ioc->name, ii));
1225
1226 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1227
1228 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1229 return -2;
1230 }
1231
1232 /* Send request via doorbell handshake */
1233 req_as_bytes = (u8 *) req;
1234 for (ii = 0; ii < reqBytes/4; ii++) {
1235 u32 word;
1236
1237 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1238 (req_as_bytes[(ii*4) + 1] << 8) |
1239 (req_as_bytes[(ii*4) + 2] << 16) |
1240 (req_as_bytes[(ii*4) + 3] << 24));
1241 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1242 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1243 r = -3;
1244 break;
1245 }
1246 }
1247
1248 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1249 r = 0;
1250 else
1251 r = -4;
1252
1253 /* Make sure there are no doorbells */
1254 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1255
1256 return r;
1257 }
1258
1259 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1260 /**
1261 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1262 * @ioc: Pointer to MPT adapter structure
1263 * @access_control_value: define bits below
1264 * @sleepFlag: Specifies whether the process can sleep
1265 *
1266 * Provides mechanism for the host driver to control the IOC's
1267 * Host Page Buffer access.
1268 *
1269 * Access Control Value - bits[15:12]
1270 * 0h Reserved
1271 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1272 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1273 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1274 *
1275 * Returns 0 for success, non-zero for failure.
1276 */
1277
1278 static int
1279 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1280 {
1281 int r = 0;
1282
1283 /* return if in use */
1284 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1285 & MPI_DOORBELL_ACTIVE)
1286 return -1;
1287
1288 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1289
1290 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1291 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1292 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1293 (access_control_value<<12)));
1294
1295 /* Wait for IOC to clear Doorbell Status bit */
1296 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1297 return -2;
1298 }else
1299 return 0;
1300 }
1301
1302 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1303 /**
1304 * mpt_host_page_alloc - allocate system memory for the fw
1305 * @ioc: Pointer to pointer to IOC adapter
1306 * @ioc_init: Pointer to ioc init config page
1307 *
1308 * If we already allocated memory in past, then resend the same pointer.
1309 * Returns 0 for success, non-zero for failure.
1310 */
1311 static int
1312 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1313 {
1314 char *psge;
1315 int flags_length;
1316 u32 host_page_buffer_sz=0;
1317
1318 if(!ioc->HostPageBuffer) {
1319
1320 host_page_buffer_sz =
1321 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1322
1323 if(!host_page_buffer_sz)
1324 return 0; /* fw doesn't need any host buffers */
1325
1326 /* spin till we get enough memory */
1327 while(host_page_buffer_sz > 0) {
1328
1329 if((ioc->HostPageBuffer = pci_alloc_consistent(
1330 ioc->pcidev,
1331 host_page_buffer_sz,
1332 &ioc->HostPageBuffer_dma)) != NULL) {
1333
1334 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1335 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1336 ioc->name, ioc->HostPageBuffer,
1337 (u32)ioc->HostPageBuffer_dma,
1338 host_page_buffer_sz));
1339 ioc->alloc_total += host_page_buffer_sz;
1340 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1341 break;
1342 }
1343
1344 host_page_buffer_sz -= (4*1024);
1345 }
1346 }
1347
1348 if(!ioc->HostPageBuffer) {
1349 printk(MYIOC_s_ERR_FMT
1350 "Failed to alloc memory for host_page_buffer!\n",
1351 ioc->name);
1352 return -999;
1353 }
1354
1355 psge = (char *)&ioc_init->HostPageBufferSGE;
1356 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1357 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1358 MPI_SGE_FLAGS_HOST_TO_IOC |
1359 MPI_SGE_FLAGS_END_OF_BUFFER;
1360 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1361 flags_length |= ioc->HostPageBuffer_sz;
1362 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1363 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1364
1365 return 0;
1366 }
1367
1368 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1369 /**
1370 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1371 * @iocid: IOC unique identifier (integer)
1372 * @iocpp: Pointer to pointer to IOC adapter
1373 *
1374 * Given a unique IOC identifier, set pointer to the associated MPT
1375 * adapter structure.
1376 *
1377 * Returns iocid and sets iocpp if iocid is found.
1378 * Returns -1 if iocid is not found.
1379 */
1380 int
1381 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1382 {
1383 MPT_ADAPTER *ioc;
1384
1385 list_for_each_entry(ioc,&ioc_list,list) {
1386 if (ioc->id == iocid) {
1387 *iocpp =ioc;
1388 return iocid;
1389 }
1390 }
1391
1392 *iocpp = NULL;
1393 return -1;
1394 }
1395
1396 /**
1397 * mpt_get_product_name - returns product string
1398 * @vendor: pci vendor id
1399 * @device: pci device id
1400 * @revision: pci revision id
1401 *
1402 * Returns product string displayed when driver loads,
1403 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1404 *
1405 **/
1406 static const char*
1407 mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1408 {
1409 char *product_str = NULL;
1410
1411 if (vendor == PCI_VENDOR_ID_BROCADE) {
1412 switch (device)
1413 {
1414 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1415 switch (revision)
1416 {
1417 case 0x00:
1418 product_str = "BRE040 A0";
1419 break;
1420 case 0x01:
1421 product_str = "BRE040 A1";
1422 break;
1423 default:
1424 product_str = "BRE040";
1425 break;
1426 }
1427 break;
1428 }
1429 goto out;
1430 }
1431
1432 switch (device)
1433 {
1434 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1435 product_str = "LSIFC909 B1";
1436 break;
1437 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1438 product_str = "LSIFC919 B0";
1439 break;
1440 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1441 product_str = "LSIFC929 B0";
1442 break;
1443 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1444 if (revision < 0x80)
1445 product_str = "LSIFC919X A0";
1446 else
1447 product_str = "LSIFC919XL A1";
1448 break;
1449 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1450 if (revision < 0x80)
1451 product_str = "LSIFC929X A0";
1452 else
1453 product_str = "LSIFC929XL A1";
1454 break;
1455 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1456 product_str = "LSIFC939X A1";
1457 break;
1458 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1459 product_str = "LSIFC949X A1";
1460 break;
1461 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1462 switch (revision)
1463 {
1464 case 0x00:
1465 product_str = "LSIFC949E A0";
1466 break;
1467 case 0x01:
1468 product_str = "LSIFC949E A1";
1469 break;
1470 default:
1471 product_str = "LSIFC949E";
1472 break;
1473 }
1474 break;
1475 case MPI_MANUFACTPAGE_DEVID_53C1030:
1476 switch (revision)
1477 {
1478 case 0x00:
1479 product_str = "LSI53C1030 A0";
1480 break;
1481 case 0x01:
1482 product_str = "LSI53C1030 B0";
1483 break;
1484 case 0x03:
1485 product_str = "LSI53C1030 B1";
1486 break;
1487 case 0x07:
1488 product_str = "LSI53C1030 B2";
1489 break;
1490 case 0x08:
1491 product_str = "LSI53C1030 C0";
1492 break;
1493 case 0x80:
1494 product_str = "LSI53C1030T A0";
1495 break;
1496 case 0x83:
1497 product_str = "LSI53C1030T A2";
1498 break;
1499 case 0x87:
1500 product_str = "LSI53C1030T A3";
1501 break;
1502 case 0xc1:
1503 product_str = "LSI53C1020A A1";
1504 break;
1505 default:
1506 product_str = "LSI53C1030";
1507 break;
1508 }
1509 break;
1510 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1511 switch (revision)
1512 {
1513 case 0x03:
1514 product_str = "LSI53C1035 A2";
1515 break;
1516 case 0x04:
1517 product_str = "LSI53C1035 B0";
1518 break;
1519 default:
1520 product_str = "LSI53C1035";
1521 break;
1522 }
1523 break;
1524 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1525 switch (revision)
1526 {
1527 case 0x00:
1528 product_str = "LSISAS1064 A1";
1529 break;
1530 case 0x01:
1531 product_str = "LSISAS1064 A2";
1532 break;
1533 case 0x02:
1534 product_str = "LSISAS1064 A3";
1535 break;
1536 case 0x03:
1537 product_str = "LSISAS1064 A4";
1538 break;
1539 default:
1540 product_str = "LSISAS1064";
1541 break;
1542 }
1543 break;
1544 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1545 switch (revision)
1546 {
1547 case 0x00:
1548 product_str = "LSISAS1064E A0";
1549 break;
1550 case 0x01:
1551 product_str = "LSISAS1064E B0";
1552 break;
1553 case 0x02:
1554 product_str = "LSISAS1064E B1";
1555 break;
1556 case 0x04:
1557 product_str = "LSISAS1064E B2";
1558 break;
1559 case 0x08:
1560 product_str = "LSISAS1064E B3";
1561 break;
1562 default:
1563 product_str = "LSISAS1064E";
1564 break;
1565 }
1566 break;
1567 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1568 switch (revision)
1569 {
1570 case 0x00:
1571 product_str = "LSISAS1068 A0";
1572 break;
1573 case 0x01:
1574 product_str = "LSISAS1068 B0";
1575 break;
1576 case 0x02:
1577 product_str = "LSISAS1068 B1";
1578 break;
1579 default:
1580 product_str = "LSISAS1068";
1581 break;
1582 }
1583 break;
1584 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1585 switch (revision)
1586 {
1587 case 0x00:
1588 product_str = "LSISAS1068E A0";
1589 break;
1590 case 0x01:
1591 product_str = "LSISAS1068E B0";
1592 break;
1593 case 0x02:
1594 product_str = "LSISAS1068E B1";
1595 break;
1596 case 0x04:
1597 product_str = "LSISAS1068E B2";
1598 break;
1599 case 0x08:
1600 product_str = "LSISAS1068E B3";
1601 break;
1602 default:
1603 product_str = "LSISAS1068E";
1604 break;
1605 }
1606 break;
1607 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1608 switch (revision)
1609 {
1610 case 0x00:
1611 product_str = "LSISAS1078 A0";
1612 break;
1613 case 0x01:
1614 product_str = "LSISAS1078 B0";
1615 break;
1616 case 0x02:
1617 product_str = "LSISAS1078 C0";
1618 break;
1619 case 0x03:
1620 product_str = "LSISAS1078 C1";
1621 break;
1622 case 0x04:
1623 product_str = "LSISAS1078 C2";
1624 break;
1625 default:
1626 product_str = "LSISAS1078";
1627 break;
1628 }
1629 break;
1630 }
1631
1632 out:
1633 return product_str;
1634 }
1635
1636 /**
1637 * mpt_mapresources - map in memory mapped io
1638 * @ioc: Pointer to pointer to IOC adapter
1639 *
1640 **/
1641 static int
1642 mpt_mapresources(MPT_ADAPTER *ioc)
1643 {
1644 u8 __iomem *mem;
1645 int ii;
1646 resource_size_t mem_phys;
1647 unsigned long port;
1648 u32 msize;
1649 u32 psize;
1650 int r = -ENODEV;
1651 struct pci_dev *pdev;
1652
1653 pdev = ioc->pcidev;
1654 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1655 if (pci_enable_device_mem(pdev)) {
1656 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1657 "failed\n", ioc->name);
1658 return r;
1659 }
1660 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1661 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1662 "MEM failed\n", ioc->name);
1663 goto out_pci_disable_device;
1664 }
1665
1666 if (sizeof(dma_addr_t) > 4) {
1667 const uint64_t required_mask = dma_get_required_mask
1668 (&pdev->dev);
1669 if (required_mask > DMA_BIT_MASK(32)
1670 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1671 && !pci_set_consistent_dma_mask(pdev,
1672 DMA_BIT_MASK(64))) {
1673 ioc->dma_mask = DMA_BIT_MASK(64);
1674 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1675 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1676 ioc->name));
1677 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1678 && !pci_set_consistent_dma_mask(pdev,
1679 DMA_BIT_MASK(32))) {
1680 ioc->dma_mask = DMA_BIT_MASK(32);
1681 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1682 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1683 ioc->name));
1684 } else {
1685 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1686 ioc->name, pci_name(pdev));
1687 goto out_pci_release_region;
1688 }
1689 } else {
1690 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1691 && !pci_set_consistent_dma_mask(pdev,
1692 DMA_BIT_MASK(32))) {
1693 ioc->dma_mask = DMA_BIT_MASK(32);
1694 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1695 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1696 ioc->name));
1697 } else {
1698 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1699 ioc->name, pci_name(pdev));
1700 goto out_pci_release_region;
1701 }
1702 }
1703
1704 mem_phys = msize = 0;
1705 port = psize = 0;
1706 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1707 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1708 if (psize)
1709 continue;
1710 /* Get I/O space! */
1711 port = pci_resource_start(pdev, ii);
1712 psize = pci_resource_len(pdev, ii);
1713 } else {
1714 if (msize)
1715 continue;
1716 /* Get memmap */
1717 mem_phys = pci_resource_start(pdev, ii);
1718 msize = pci_resource_len(pdev, ii);
1719 }
1720 }
1721 ioc->mem_size = msize;
1722
1723 mem = NULL;
1724 /* Get logical ptr for PciMem0 space */
1725 /*mem = ioremap(mem_phys, msize);*/
1726 mem = ioremap(mem_phys, msize);
1727 if (mem == NULL) {
1728 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1729 " memory!\n", ioc->name);
1730 r = -EINVAL;
1731 goto out_pci_release_region;
1732 }
1733 ioc->memmap = mem;
1734 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1735 ioc->name, mem, (unsigned long long)mem_phys));
1736
1737 ioc->mem_phys = mem_phys;
1738 ioc->chip = (SYSIF_REGS __iomem *)mem;
1739
1740 /* Save Port IO values in case we need to do downloadboot */
1741 ioc->pio_mem_phys = port;
1742 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1743
1744 return 0;
1745
1746 out_pci_release_region:
1747 pci_release_selected_regions(pdev, ioc->bars);
1748 out_pci_disable_device:
1749 pci_disable_device(pdev);
1750 return r;
1751 }
1752
1753 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1754 /**
1755 * mpt_attach - Install a PCI intelligent MPT adapter.
1756 * @pdev: Pointer to pci_dev structure
1757 * @id: PCI device ID information
1758 *
1759 * This routine performs all the steps necessary to bring the IOC of
1760 * a MPT adapter to a OPERATIONAL state. This includes registering
1761 * memory regions, registering the interrupt, and allocating request
1762 * and reply memory pools.
1763 *
1764 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1765 * MPT adapter.
1766 *
1767 * Returns 0 for success, non-zero for failure.
1768 *
1769 * TODO: Add support for polled controllers
1770 */
1771 int
1772 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1773 {
1774 MPT_ADAPTER *ioc;
1775 u8 cb_idx;
1776 int r = -ENODEV;
1777 u8 pcixcmd;
1778 static int mpt_ids = 0;
1779 #ifdef CONFIG_PROC_FS
1780 struct proc_dir_entry *dent;
1781 #endif
1782
1783 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL);
1784 if (ioc == NULL) {
1785 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1786 return -ENOMEM;
1787 }
1788
1789 ioc->id = mpt_ids++;
1790 sprintf(ioc->name, "ioc%d", ioc->id);
1791 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1792
1793 /*
1794 * set initial debug level
1795 * (refer to mptdebug.h)
1796 *
1797 */
1798 ioc->debug_level = mpt_debug_level;
1799 if (mpt_debug_level)
1800 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1801
1802 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1803
1804 ioc->pcidev = pdev;
1805 if (mpt_mapresources(ioc)) {
1806 goto out_free_ioc;
1807 }
1808
1809 /*
1810 * Setting up proper handlers for scatter gather handling
1811 */
1812 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1813 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1814 ioc->add_sge = &mpt_add_sge_64bit_1078;
1815 else
1816 ioc->add_sge = &mpt_add_sge_64bit;
1817 ioc->add_chain = &mpt_add_chain_64bit;
1818 ioc->sg_addr_size = 8;
1819 } else {
1820 ioc->add_sge = &mpt_add_sge;
1821 ioc->add_chain = &mpt_add_chain;
1822 ioc->sg_addr_size = 4;
1823 }
1824 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1825
1826 ioc->alloc_total = sizeof(MPT_ADAPTER);
1827 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1828 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1829
1830
1831 spin_lock_init(&ioc->taskmgmt_lock);
1832 mutex_init(&ioc->internal_cmds.mutex);
1833 init_completion(&ioc->internal_cmds.done);
1834 mutex_init(&ioc->mptbase_cmds.mutex);
1835 init_completion(&ioc->mptbase_cmds.done);
1836 mutex_init(&ioc->taskmgmt_cmds.mutex);
1837 init_completion(&ioc->taskmgmt_cmds.done);
1838
1839 /* Initialize the event logging.
1840 */
1841 ioc->eventTypes = 0; /* None */
1842 ioc->eventContext = 0;
1843 ioc->eventLogSize = 0;
1844 ioc->events = NULL;
1845
1846 #ifdef MFCNT
1847 ioc->mfcnt = 0;
1848 #endif
1849
1850 ioc->sh = NULL;
1851 ioc->cached_fw = NULL;
1852
1853 /* Initialize SCSI Config Data structure
1854 */
1855 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1856
1857 /* Initialize the fc rport list head.
1858 */
1859 INIT_LIST_HEAD(&ioc->fc_rports);
1860
1861 /* Find lookup slot. */
1862 INIT_LIST_HEAD(&ioc->list);
1863
1864
1865 /* Initialize workqueue */
1866 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1867
1868 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1869 "mpt_poll_%d", ioc->id);
1870 ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name,
1871 WQ_MEM_RECLAIM, 0);
1872 if (!ioc->reset_work_q) {
1873 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1874 ioc->name);
1875 r = -ENOMEM;
1876 goto out_unmap_resources;
1877 }
1878
1879 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1880 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1881
1882 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1883 pdev->revision);
1884
1885 switch (pdev->device)
1886 {
1887 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1888 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1889 ioc->errata_flag_1064 = 1;
1890 /* fall through */
1891 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1892 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1893 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1894 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1895 ioc->bus_type = FC;
1896 break;
1897
1898 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1899 if (pdev->revision < XL_929) {
1900 /* 929X Chip Fix. Set Split transactions level
1901 * for PCIX. Set MOST bits to zero.
1902 */
1903 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1904 pcixcmd &= 0x8F;
1905 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1906 } else {
1907 /* 929XL Chip Fix. Set MMRBC to 0x08.
1908 */
1909 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1910 pcixcmd |= 0x08;
1911 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1912 }
1913 ioc->bus_type = FC;
1914 break;
1915
1916 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1917 /* 919X Chip Fix. Set Split transactions level
1918 * for PCIX. Set MOST bits to zero.
1919 */
1920 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1921 pcixcmd &= 0x8F;
1922 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1923 ioc->bus_type = FC;
1924 break;
1925
1926 case MPI_MANUFACTPAGE_DEVID_53C1030:
1927 /* 1030 Chip Fix. Disable Split transactions
1928 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1929 */
1930 if (pdev->revision < C0_1030) {
1931 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1932 pcixcmd &= 0x8F;
1933 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1934 }
1935 /* fall through */
1936
1937 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1938 ioc->bus_type = SPI;
1939 break;
1940
1941 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1942 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1943 ioc->errata_flag_1064 = 1;
1944 ioc->bus_type = SAS;
1945 break;
1946
1947 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1948 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1949 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1950 ioc->bus_type = SAS;
1951 break;
1952 }
1953
1954
1955 switch (ioc->bus_type) {
1956
1957 case SAS:
1958 ioc->msi_enable = mpt_msi_enable_sas;
1959 break;
1960
1961 case SPI:
1962 ioc->msi_enable = mpt_msi_enable_spi;
1963 break;
1964
1965 case FC:
1966 ioc->msi_enable = mpt_msi_enable_fc;
1967 break;
1968
1969 default:
1970 ioc->msi_enable = 0;
1971 break;
1972 }
1973
1974 ioc->fw_events_off = 1;
1975
1976 if (ioc->errata_flag_1064)
1977 pci_disable_io_access(pdev);
1978
1979 spin_lock_init(&ioc->FreeQlock);
1980
1981 /* Disable all! */
1982 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1983 ioc->active = 0;
1984 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1985
1986 /* Set IOC ptr in the pcidev's driver data. */
1987 pci_set_drvdata(ioc->pcidev, ioc);
1988
1989 /* Set lookup ptr. */
1990 list_add_tail(&ioc->list, &ioc_list);
1991
1992 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1993 */
1994 mpt_detect_bound_ports(ioc, pdev);
1995
1996 INIT_LIST_HEAD(&ioc->fw_event_list);
1997 spin_lock_init(&ioc->fw_event_lock);
1998 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1999 ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name,
2000 WQ_MEM_RECLAIM, 0);
2001 if (!ioc->fw_event_q) {
2002 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
2003 ioc->name);
2004 r = -ENOMEM;
2005 goto out_remove_ioc;
2006 }
2007
2008 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2009 CAN_SLEEP)) != 0){
2010 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2011 ioc->name, r);
2012
2013 destroy_workqueue(ioc->fw_event_q);
2014 ioc->fw_event_q = NULL;
2015
2016 list_del(&ioc->list);
2017 if (ioc->alt_ioc)
2018 ioc->alt_ioc->alt_ioc = NULL;
2019 iounmap(ioc->memmap);
2020 if (pci_is_enabled(pdev))
2021 pci_disable_device(pdev);
2022 if (r != -5)
2023 pci_release_selected_regions(pdev, ioc->bars);
2024
2025 destroy_workqueue(ioc->reset_work_q);
2026 ioc->reset_work_q = NULL;
2027
2028 kfree(ioc);
2029 return r;
2030 }
2031
2032 /* call per device driver probe entry point */
2033 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2034 if(MptDeviceDriverHandlers[cb_idx] &&
2035 MptDeviceDriverHandlers[cb_idx]->probe) {
2036 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2037 }
2038 }
2039
2040 #ifdef CONFIG_PROC_FS
2041 /*
2042 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2043 */
2044 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2045 if (dent) {
2046 proc_create_single_data("info", S_IRUGO, dent,
2047 mpt_iocinfo_proc_show, ioc);
2048 proc_create_single_data("summary", S_IRUGO, dent,
2049 mpt_summary_proc_show, ioc);
2050 }
2051 #endif
2052
2053 if (!ioc->alt_ioc)
2054 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2055 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2056
2057 return 0;
2058
2059 out_remove_ioc:
2060 list_del(&ioc->list);
2061 if (ioc->alt_ioc)
2062 ioc->alt_ioc->alt_ioc = NULL;
2063
2064 destroy_workqueue(ioc->reset_work_q);
2065 ioc->reset_work_q = NULL;
2066
2067 out_unmap_resources:
2068 iounmap(ioc->memmap);
2069 pci_disable_device(pdev);
2070 pci_release_selected_regions(pdev, ioc->bars);
2071
2072 out_free_ioc:
2073 kfree(ioc);
2074
2075 return r;
2076 }
2077
2078 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2079 /**
2080 * mpt_detach - Remove a PCI intelligent MPT adapter.
2081 * @pdev: Pointer to pci_dev structure
2082 */
2083
2084 void
2085 mpt_detach(struct pci_dev *pdev)
2086 {
2087 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2088 char pname[64];
2089 u8 cb_idx;
2090 unsigned long flags;
2091 struct workqueue_struct *wq;
2092
2093 /*
2094 * Stop polling ioc for fault condition
2095 */
2096 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2097 wq = ioc->reset_work_q;
2098 ioc->reset_work_q = NULL;
2099 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2100 cancel_delayed_work(&ioc->fault_reset_work);
2101 destroy_workqueue(wq);
2102
2103 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2104 wq = ioc->fw_event_q;
2105 ioc->fw_event_q = NULL;
2106 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2107 destroy_workqueue(wq);
2108
2109 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2110 remove_proc_entry(pname, NULL);
2111 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2112 remove_proc_entry(pname, NULL);
2113 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2114 remove_proc_entry(pname, NULL);
2115
2116 /* call per device driver remove entry point */
2117 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2118 if(MptDeviceDriverHandlers[cb_idx] &&
2119 MptDeviceDriverHandlers[cb_idx]->remove) {
2120 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2121 }
2122 }
2123
2124 /* Disable interrupts! */
2125 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2126
2127 ioc->active = 0;
2128 synchronize_irq(pdev->irq);
2129
2130 /* Clear any lingering interrupt */
2131 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2132
2133 CHIPREG_READ32(&ioc->chip->IntStatus);
2134
2135 mpt_adapter_dispose(ioc);
2136
2137 }
2138
2139 /**************************************************************************
2140 * Power Management
2141 */
2142 #ifdef CONFIG_PM
2143 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2144 /**
2145 * mpt_suspend - Fusion MPT base driver suspend routine.
2146 * @pdev: Pointer to pci_dev structure
2147 * @state: new state to enter
2148 */
2149 int
2150 mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2151 {
2152 u32 device_state;
2153 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2154
2155 device_state = pci_choose_state(pdev, state);
2156 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2157 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2158 device_state);
2159
2160 /* put ioc into READY_STATE */
2161 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2162 printk(MYIOC_s_ERR_FMT
2163 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2164 }
2165
2166 /* disable interrupts */
2167 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2168 ioc->active = 0;
2169
2170 /* Clear any lingering interrupt */
2171 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2172
2173 free_irq(ioc->pci_irq, ioc);
2174 if (ioc->msi_enable)
2175 pci_disable_msi(ioc->pcidev);
2176 ioc->pci_irq = -1;
2177 pci_save_state(pdev);
2178 pci_disable_device(pdev);
2179 pci_release_selected_regions(pdev, ioc->bars);
2180 pci_set_power_state(pdev, device_state);
2181 return 0;
2182 }
2183
2184 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2185 /**
2186 * mpt_resume - Fusion MPT base driver resume routine.
2187 * @pdev: Pointer to pci_dev structure
2188 */
2189 int
2190 mpt_resume(struct pci_dev *pdev)
2191 {
2192 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2193 u32 device_state = pdev->current_state;
2194 int recovery_state;
2195 int err;
2196
2197 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2198 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2199 device_state);
2200
2201 pci_set_power_state(pdev, PCI_D0);
2202 pci_enable_wake(pdev, PCI_D0, 0);
2203 pci_restore_state(pdev);
2204 ioc->pcidev = pdev;
2205 err = mpt_mapresources(ioc);
2206 if (err)
2207 return err;
2208
2209 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2210 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2211 ioc->add_sge = &mpt_add_sge_64bit_1078;
2212 else
2213 ioc->add_sge = &mpt_add_sge_64bit;
2214 ioc->add_chain = &mpt_add_chain_64bit;
2215 ioc->sg_addr_size = 8;
2216 } else {
2217
2218 ioc->add_sge = &mpt_add_sge;
2219 ioc->add_chain = &mpt_add_chain;
2220 ioc->sg_addr_size = 4;
2221 }
2222 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2223
2224 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2225 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2226 CHIPREG_READ32(&ioc->chip->Doorbell));
2227
2228 /*
2229 * Errata workaround for SAS pci express:
2230 * Upon returning to the D0 state, the contents of the doorbell will be
2231 * stale data, and this will incorrectly signal to the host driver that
2232 * the firmware is ready to process mpt commands. The workaround is
2233 * to issue a diagnostic reset.
2234 */
2235 if (ioc->bus_type == SAS && (pdev->device ==
2236 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2237 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2238 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2239 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2240 ioc->name);
2241 goto out;
2242 }
2243 }
2244
2245 /* bring ioc to operational state */
2246 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2247 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2248 CAN_SLEEP);
2249 if (recovery_state != 0)
2250 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2251 "error:[%x]\n", ioc->name, recovery_state);
2252 else
2253 printk(MYIOC_s_INFO_FMT
2254 "pci-resume: success\n", ioc->name);
2255 out:
2256 return 0;
2257
2258 }
2259 #endif
2260
2261 static int
2262 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2263 {
2264 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2265 ioc->bus_type != SPI) ||
2266 (MptDriverClass[index] == MPTFC_DRIVER &&
2267 ioc->bus_type != FC) ||
2268 (MptDriverClass[index] == MPTSAS_DRIVER &&
2269 ioc->bus_type != SAS))
2270 /* make sure we only call the relevant reset handler
2271 * for the bus */
2272 return 0;
2273 return (MptResetHandlers[index])(ioc, reset_phase);
2274 }
2275
2276 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2277 /**
2278 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2279 * @ioc: Pointer to MPT adapter structure
2280 * @reason: Event word / reason
2281 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2282 *
2283 * This routine performs all the steps necessary to bring the IOC
2284 * to a OPERATIONAL state.
2285 *
2286 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2287 * MPT adapter.
2288 *
2289 * Returns:
2290 * 0 for success
2291 * -1 if failed to get board READY
2292 * -2 if READY but IOCFacts Failed
2293 * -3 if READY but PrimeIOCFifos Failed
2294 * -4 if READY but IOCInit Failed
2295 * -5 if failed to enable_device and/or request_selected_regions
2296 * -6 if failed to upload firmware
2297 */
2298 static int
2299 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2300 {
2301 int hard_reset_done = 0;
2302 int alt_ioc_ready = 0;
2303 int hard;
2304 int rc=0;
2305 int ii;
2306 int ret = 0;
2307 int reset_alt_ioc_active = 0;
2308 int irq_allocated = 0;
2309 u8 *a;
2310
2311 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2312 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2313
2314 /* Disable reply interrupts (also blocks FreeQ) */
2315 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2316 ioc->active = 0;
2317
2318 if (ioc->alt_ioc) {
2319 if (ioc->alt_ioc->active ||
2320 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2321 reset_alt_ioc_active = 1;
2322 /* Disable alt-IOC's reply interrupts
2323 * (and FreeQ) for a bit
2324 **/
2325 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2326 0xFFFFFFFF);
2327 ioc->alt_ioc->active = 0;
2328 }
2329 }
2330
2331 hard = 1;
2332 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2333 hard = 0;
2334
2335 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2336 if (hard_reset_done == -4) {
2337 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2338 ioc->name);
2339
2340 if (reset_alt_ioc_active && ioc->alt_ioc) {
2341 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2342 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2343 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2344 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2345 ioc->alt_ioc->active = 1;
2346 }
2347
2348 } else {
2349 printk(MYIOC_s_WARN_FMT
2350 "NOT READY WARNING!\n", ioc->name);
2351 }
2352 ret = -1;
2353 goto out;
2354 }
2355
2356 /* hard_reset_done = 0 if a soft reset was performed
2357 * and 1 if a hard reset was performed.
2358 */
2359 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2360 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2361 alt_ioc_ready = 1;
2362 else
2363 printk(MYIOC_s_WARN_FMT
2364 ": alt-ioc Not ready WARNING!\n",
2365 ioc->alt_ioc->name);
2366 }
2367
2368 for (ii=0; ii<5; ii++) {
2369 /* Get IOC facts! Allow 5 retries */
2370 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2371 break;
2372 }
2373
2374
2375 if (ii == 5) {
2376 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2377 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2378 ret = -2;
2379 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2380 MptDisplayIocCapabilities(ioc);
2381 }
2382
2383 if (alt_ioc_ready) {
2384 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2385 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2386 "Initial Alt IocFacts failed rc=%x\n",
2387 ioc->name, rc));
2388 /* Retry - alt IOC was initialized once
2389 */
2390 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2391 }
2392 if (rc) {
2393 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2394 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2395 alt_ioc_ready = 0;
2396 reset_alt_ioc_active = 0;
2397 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2398 MptDisplayIocCapabilities(ioc->alt_ioc);
2399 }
2400 }
2401
2402 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2403 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2404 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2405 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2406 IORESOURCE_IO);
2407 if (pci_enable_device(ioc->pcidev))
2408 return -5;
2409 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2410 "mpt"))
2411 return -5;
2412 }
2413
2414 /*
2415 * Device is reset now. It must have de-asserted the interrupt line
2416 * (if it was asserted) and it should be safe to register for the
2417 * interrupt now.
2418 */
2419 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2420 ioc->pci_irq = -1;
2421 if (ioc->pcidev->irq) {
2422 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2423 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2424 ioc->name);
2425 else
2426 ioc->msi_enable = 0;
2427 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2428 IRQF_SHARED, ioc->name, ioc);
2429 if (rc < 0) {
2430 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2431 "interrupt %d!\n",
2432 ioc->name, ioc->pcidev->irq);
2433 if (ioc->msi_enable)
2434 pci_disable_msi(ioc->pcidev);
2435 ret = -EBUSY;
2436 goto out;
2437 }
2438 irq_allocated = 1;
2439 ioc->pci_irq = ioc->pcidev->irq;
2440 pci_set_master(ioc->pcidev); /* ?? */
2441 pci_set_drvdata(ioc->pcidev, ioc);
2442 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2443 "installed at interrupt %d\n", ioc->name,
2444 ioc->pcidev->irq));
2445 }
2446 }
2447
2448 /* Prime reply & request queues!
2449 * (mucho alloc's) Must be done prior to
2450 * init as upper addresses are needed for init.
2451 * If fails, continue with alt-ioc processing
2452 */
2453 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2454 ioc->name));
2455 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2456 ret = -3;
2457
2458 /* May need to check/upload firmware & data here!
2459 * If fails, continue with alt-ioc processing
2460 */
2461 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2462 ioc->name));
2463 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2464 ret = -4;
2465 // NEW!
2466 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2467 printk(MYIOC_s_WARN_FMT
2468 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2469 ioc->alt_ioc->name, rc);
2470 alt_ioc_ready = 0;
2471 reset_alt_ioc_active = 0;
2472 }
2473
2474 if (alt_ioc_ready) {
2475 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2476 alt_ioc_ready = 0;
2477 reset_alt_ioc_active = 0;
2478 printk(MYIOC_s_WARN_FMT
2479 ": alt-ioc: (%d) init failure WARNING!\n",
2480 ioc->alt_ioc->name, rc);
2481 }
2482 }
2483
2484 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2485 if (ioc->upload_fw) {
2486 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2487 "firmware upload required!\n", ioc->name));
2488
2489 /* Controller is not operational, cannot do upload
2490 */
2491 if (ret == 0) {
2492 rc = mpt_do_upload(ioc, sleepFlag);
2493 if (rc == 0) {
2494 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2495 /*
2496 * Maintain only one pointer to FW memory
2497 * so there will not be two attempt to
2498 * downloadboot onboard dual function
2499 * chips (mpt_adapter_disable,
2500 * mpt_diag_reset)
2501 */
2502 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2503 "mpt_upload: alt_%s has cached_fw=%p \n",
2504 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2505 ioc->cached_fw = NULL;
2506 }
2507 } else {
2508 printk(MYIOC_s_WARN_FMT
2509 "firmware upload failure!\n", ioc->name);
2510 ret = -6;
2511 }
2512 }
2513 }
2514 }
2515
2516 /* Enable MPT base driver management of EventNotification
2517 * and EventAck handling.
2518 */
2519 if ((ret == 0) && (!ioc->facts.EventState)) {
2520 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2521 "SendEventNotification\n",
2522 ioc->name));
2523 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2524 }
2525
2526 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2527 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2528
2529 if (ret == 0) {
2530 /* Enable! (reply interrupt) */
2531 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2532 ioc->active = 1;
2533 }
2534 if (rc == 0) { /* alt ioc */
2535 if (reset_alt_ioc_active && ioc->alt_ioc) {
2536 /* (re)Enable alt-IOC! (reply interrupt) */
2537 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2538 "reply irq re-enabled\n",
2539 ioc->alt_ioc->name));
2540 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2541 MPI_HIM_DIM);
2542 ioc->alt_ioc->active = 1;
2543 }
2544 }
2545
2546
2547 /* Add additional "reason" check before call to GetLanConfigPages
2548 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2549 * recursive scenario; GetLanConfigPages times out, timer expired
2550 * routine calls HardResetHandler, which calls into here again,
2551 * and we try GetLanConfigPages again...
2552 */
2553 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2554
2555 /*
2556 * Initialize link list for inactive raid volumes.
2557 */
2558 mutex_init(&ioc->raid_data.inactive_list_mutex);
2559 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2560
2561 switch (ioc->bus_type) {
2562
2563 case SAS:
2564 /* clear persistency table */
2565 if(ioc->facts.IOCExceptions &
2566 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2567 ret = mptbase_sas_persist_operation(ioc,
2568 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2569 if(ret != 0)
2570 goto out;
2571 }
2572
2573 /* Find IM volumes
2574 */
2575 mpt_findImVolumes(ioc);
2576
2577 /* Check, and possibly reset, the coalescing value
2578 */
2579 mpt_read_ioc_pg_1(ioc);
2580
2581 break;
2582
2583 case FC:
2584 if ((ioc->pfacts[0].ProtocolFlags &
2585 MPI_PORTFACTS_PROTOCOL_LAN) &&
2586 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2587 /*
2588 * Pre-fetch the ports LAN MAC address!
2589 * (LANPage1_t stuff)
2590 */
2591 (void) GetLanConfigPages(ioc);
2592 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2593 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2594 "LanAddr = %pMR\n", ioc->name, a));
2595 }
2596 break;
2597
2598 case SPI:
2599 /* Get NVRAM and adapter maximums from SPP 0 and 2
2600 */
2601 mpt_GetScsiPortSettings(ioc, 0);
2602
2603 /* Get version and length of SDP 1
2604 */
2605 mpt_readScsiDevicePageHeaders(ioc, 0);
2606
2607 /* Find IM volumes
2608 */
2609 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2610 mpt_findImVolumes(ioc);
2611
2612 /* Check, and possibly reset, the coalescing value
2613 */
2614 mpt_read_ioc_pg_1(ioc);
2615
2616 mpt_read_ioc_pg_4(ioc);
2617
2618 break;
2619 }
2620
2621 GetIoUnitPage2(ioc);
2622 mpt_get_manufacturing_pg_0(ioc);
2623 }
2624
2625 out:
2626 if ((ret != 0) && irq_allocated) {
2627 free_irq(ioc->pci_irq, ioc);
2628 if (ioc->msi_enable)
2629 pci_disable_msi(ioc->pcidev);
2630 }
2631 return ret;
2632 }
2633
2634 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2635 /**
2636 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2637 * @ioc: Pointer to MPT adapter structure
2638 * @pdev: Pointer to (struct pci_dev) structure
2639 *
2640 * Search for PCI bus/dev_function which matches
2641 * PCI bus/dev_function (+/-1) for newly discovered 929,
2642 * 929X, 1030 or 1035.
2643 *
2644 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2645 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2646 */
2647 static void
2648 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2649 {
2650 struct pci_dev *peer=NULL;
2651 unsigned int slot = PCI_SLOT(pdev->devfn);
2652 unsigned int func = PCI_FUNC(pdev->devfn);
2653 MPT_ADAPTER *ioc_srch;
2654
2655 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2656 " searching for devfn match on %x or %x\n",
2657 ioc->name, pci_name(pdev), pdev->bus->number,
2658 pdev->devfn, func-1, func+1));
2659
2660 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2661 if (!peer) {
2662 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2663 if (!peer)
2664 return;
2665 }
2666
2667 list_for_each_entry(ioc_srch, &ioc_list, list) {
2668 struct pci_dev *_pcidev = ioc_srch->pcidev;
2669 if (_pcidev == peer) {
2670 /* Paranoia checks */
2671 if (ioc->alt_ioc != NULL) {
2672 printk(MYIOC_s_WARN_FMT
2673 "Oops, already bound (%s <==> %s)!\n",
2674 ioc->name, ioc->name, ioc->alt_ioc->name);
2675 break;
2676 } else if (ioc_srch->alt_ioc != NULL) {
2677 printk(MYIOC_s_WARN_FMT
2678 "Oops, already bound (%s <==> %s)!\n",
2679 ioc_srch->name, ioc_srch->name,
2680 ioc_srch->alt_ioc->name);
2681 break;
2682 }
2683 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2684 "FOUND! binding %s <==> %s\n",
2685 ioc->name, ioc->name, ioc_srch->name));
2686 ioc_srch->alt_ioc = ioc;
2687 ioc->alt_ioc = ioc_srch;
2688 }
2689 }
2690 pci_dev_put(peer);
2691 }
2692
2693 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2694 /**
2695 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2696 * @ioc: Pointer to MPT adapter structure
2697 */
2698 static void
2699 mpt_adapter_disable(MPT_ADAPTER *ioc)
2700 {
2701 int sz;
2702 int ret;
2703
2704 if (ioc->cached_fw != NULL) {
2705 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2706 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2707 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2708 ioc->cached_fw, CAN_SLEEP)) < 0) {
2709 printk(MYIOC_s_WARN_FMT
2710 ": firmware downloadboot failure (%d)!\n",
2711 ioc->name, ret);
2712 }
2713 }
2714
2715 /*
2716 * Put the controller into ready state (if its not already)
2717 */
2718 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2719 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2720 CAN_SLEEP)) {
2721 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2722 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2723 "reset failed to put ioc in ready state!\n",
2724 ioc->name, __func__);
2725 } else
2726 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2727 "failed!\n", ioc->name, __func__);
2728 }
2729
2730
2731 /* Disable adapter interrupts! */
2732 synchronize_irq(ioc->pcidev->irq);
2733 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2734 ioc->active = 0;
2735
2736 /* Clear any lingering interrupt */
2737 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2738 CHIPREG_READ32(&ioc->chip->IntStatus);
2739
2740 if (ioc->alloc != NULL) {
2741 sz = ioc->alloc_sz;
2742 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2743 ioc->name, ioc->alloc, ioc->alloc_sz));
2744 pci_free_consistent(ioc->pcidev, sz,
2745 ioc->alloc, ioc->alloc_dma);
2746 ioc->reply_frames = NULL;
2747 ioc->req_frames = NULL;
2748 ioc->alloc = NULL;
2749 ioc->alloc_total -= sz;
2750 }
2751
2752 if (ioc->sense_buf_pool != NULL) {
2753 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2754 pci_free_consistent(ioc->pcidev, sz,
2755 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2756 ioc->sense_buf_pool = NULL;
2757 ioc->alloc_total -= sz;
2758 }
2759
2760 if (ioc->events != NULL){
2761 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2762 kfree(ioc->events);
2763 ioc->events = NULL;
2764 ioc->alloc_total -= sz;
2765 }
2766
2767 mpt_free_fw_memory(ioc);
2768
2769 kfree(ioc->spi_data.nvram);
2770 mpt_inactive_raid_list_free(ioc);
2771 kfree(ioc->raid_data.pIocPg2);
2772 kfree(ioc->raid_data.pIocPg3);
2773 ioc->spi_data.nvram = NULL;
2774 ioc->raid_data.pIocPg3 = NULL;
2775
2776 if (ioc->spi_data.pIocPg4 != NULL) {
2777 sz = ioc->spi_data.IocPg4Sz;
2778 pci_free_consistent(ioc->pcidev, sz,
2779 ioc->spi_data.pIocPg4,
2780 ioc->spi_data.IocPg4_dma);
2781 ioc->spi_data.pIocPg4 = NULL;
2782 ioc->alloc_total -= sz;
2783 }
2784
2785 if (ioc->ReqToChain != NULL) {
2786 kfree(ioc->ReqToChain);
2787 kfree(ioc->RequestNB);
2788 ioc->ReqToChain = NULL;
2789 }
2790
2791 kfree(ioc->ChainToChain);
2792 ioc->ChainToChain = NULL;
2793
2794 if (ioc->HostPageBuffer != NULL) {
2795 if((ret = mpt_host_page_access_control(ioc,
2796 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2797 printk(MYIOC_s_ERR_FMT
2798 ": %s: host page buffers free failed (%d)!\n",
2799 ioc->name, __func__, ret);
2800 }
2801 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2802 "HostPageBuffer free @ %p, sz=%d bytes\n",
2803 ioc->name, ioc->HostPageBuffer,
2804 ioc->HostPageBuffer_sz));
2805 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2806 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2807 ioc->HostPageBuffer = NULL;
2808 ioc->HostPageBuffer_sz = 0;
2809 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2810 }
2811
2812 pci_set_drvdata(ioc->pcidev, NULL);
2813 }
2814 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2815 /**
2816 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2817 * @ioc: Pointer to MPT adapter structure
2818 *
2819 * This routine unregisters h/w resources and frees all alloc'd memory
2820 * associated with a MPT adapter structure.
2821 */
2822 static void
2823 mpt_adapter_dispose(MPT_ADAPTER *ioc)
2824 {
2825 int sz_first, sz_last;
2826
2827 if (ioc == NULL)
2828 return;
2829
2830 sz_first = ioc->alloc_total;
2831
2832 mpt_adapter_disable(ioc);
2833
2834 if (ioc->pci_irq != -1) {
2835 free_irq(ioc->pci_irq, ioc);
2836 if (ioc->msi_enable)
2837 pci_disable_msi(ioc->pcidev);
2838 ioc->pci_irq = -1;
2839 }
2840
2841 if (ioc->memmap != NULL) {
2842 iounmap(ioc->memmap);
2843 ioc->memmap = NULL;
2844 }
2845
2846 pci_disable_device(ioc->pcidev);
2847 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2848
2849 /* Zap the adapter lookup ptr! */
2850 list_del(&ioc->list);
2851
2852 sz_last = ioc->alloc_total;
2853 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2854 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2855
2856 if (ioc->alt_ioc)
2857 ioc->alt_ioc->alt_ioc = NULL;
2858
2859 kfree(ioc);
2860 }
2861
2862 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2863 /**
2864 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2865 * @ioc: Pointer to MPT adapter structure
2866 */
2867 static void
2868 MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2869 {
2870 int i = 0;
2871
2872 printk(KERN_INFO "%s: ", ioc->name);
2873 if (ioc->prod_name)
2874 pr_cont("%s: ", ioc->prod_name);
2875 pr_cont("Capabilities={");
2876
2877 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2878 pr_cont("Initiator");
2879 i++;
2880 }
2881
2882 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2883 pr_cont("%sTarget", i ? "," : "");
2884 i++;
2885 }
2886
2887 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2888 pr_cont("%sLAN", i ? "," : "");
2889 i++;
2890 }
2891
2892 #if 0
2893 /*
2894 * This would probably evoke more questions than it's worth
2895 */
2896 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2897 pr_cont("%sLogBusAddr", i ? "," : "");
2898 i++;
2899 }
2900 #endif
2901
2902 pr_cont("}\n");
2903 }
2904
2905 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2906 /**
2907 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2908 * @ioc: Pointer to MPT_ADAPTER structure
2909 * @force: Force hard KickStart of IOC
2910 * @sleepFlag: Specifies whether the process can sleep
2911 *
2912 * Returns:
2913 * 1 - DIAG reset and READY
2914 * 0 - READY initially OR soft reset and READY
2915 * -1 - Any failure on KickStart
2916 * -2 - Msg Unit Reset Failed
2917 * -3 - IO Unit Reset Failed
2918 * -4 - IOC owned by a PEER
2919 */
2920 static int
2921 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2922 {
2923 u32 ioc_state;
2924 int statefault = 0;
2925 int cntdn;
2926 int hard_reset_done = 0;
2927 int r;
2928 int ii;
2929 int whoinit;
2930
2931 /* Get current [raw] IOC state */
2932 ioc_state = mpt_GetIocState(ioc, 0);
2933 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2934
2935 /*
2936 * Check to see if IOC got left/stuck in doorbell handshake
2937 * grip of death. If so, hard reset the IOC.
2938 */
2939 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2940 statefault = 1;
2941 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2942 ioc->name);
2943 }
2944
2945 /* Is it already READY? */
2946 if (!statefault &&
2947 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2948 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2949 "IOC is in READY state\n", ioc->name));
2950 return 0;
2951 }
2952
2953 /*
2954 * Check to see if IOC is in FAULT state.
2955 */
2956 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2957 statefault = 2;
2958 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2959 ioc->name);
2960 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2961 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2962 }
2963
2964 /*
2965 * Hmmm... Did it get left operational?
2966 */
2967 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2968 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2969 ioc->name));
2970
2971 /* Check WhoInit.
2972 * If PCI Peer, exit.
2973 * Else, if no fault conditions are present, issue a MessageUnitReset
2974 * Else, fall through to KickStart case
2975 */
2976 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2977 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2978 "whoinit 0x%x statefault %d force %d\n",
2979 ioc->name, whoinit, statefault, force));
2980 if (whoinit == MPI_WHOINIT_PCI_PEER)
2981 return -4;
2982 else {
2983 if ((statefault == 0 ) && (force == 0)) {
2984 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2985 return 0;
2986 }
2987 statefault = 3;
2988 }
2989 }
2990
2991 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2992 if (hard_reset_done < 0)
2993 return -1;
2994
2995 /*
2996 * Loop here waiting for IOC to come READY.
2997 */
2998 ii = 0;
2999 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
3000
3001 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
3002 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
3003 /*
3004 * BIOS or previous driver load left IOC in OP state.
3005 * Reset messaging FIFOs.
3006 */
3007 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3008 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3009 return -2;
3010 }
3011 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3012 /*
3013 * Something is wrong. Try to get IOC back
3014 * to a known state.
3015 */
3016 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3017 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3018 return -3;
3019 }
3020 }
3021
3022 ii++; cntdn--;
3023 if (!cntdn) {
3024 printk(MYIOC_s_ERR_FMT
3025 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3026 ioc->name, ioc_state, (int)((ii+5)/HZ));
3027 return -ETIME;
3028 }
3029
3030 if (sleepFlag == CAN_SLEEP) {
3031 msleep(1);
3032 } else {
3033 mdelay (1); /* 1 msec delay */
3034 }
3035
3036 }
3037
3038 if (statefault < 3) {
3039 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3040 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3041 }
3042
3043 return hard_reset_done;
3044 }
3045
3046 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3047 /**
3048 * mpt_GetIocState - Get the current state of a MPT adapter.
3049 * @ioc: Pointer to MPT_ADAPTER structure
3050 * @cooked: Request raw or cooked IOC state
3051 *
3052 * Returns all IOC Doorbell register bits if cooked==0, else just the
3053 * Doorbell bits in MPI_IOC_STATE_MASK.
3054 */
3055 u32
3056 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3057 {
3058 u32 s, sc;
3059
3060 /* Get! */
3061 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3062 sc = s & MPI_IOC_STATE_MASK;
3063
3064 /* Save! */
3065 ioc->last_state = sc;
3066
3067 return cooked ? sc : s;
3068 }
3069
3070 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3071 /**
3072 * GetIocFacts - Send IOCFacts request to MPT adapter.
3073 * @ioc: Pointer to MPT_ADAPTER structure
3074 * @sleepFlag: Specifies whether the process can sleep
3075 * @reason: If recovery, only update facts.
3076 *
3077 * Returns 0 for success, non-zero for failure.
3078 */
3079 static int
3080 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3081 {
3082 IOCFacts_t get_facts;
3083 IOCFactsReply_t *facts;
3084 int r;
3085 int req_sz;
3086 int reply_sz;
3087 int sz;
3088 u32 status, vv;
3089 u8 shiftFactor=1;
3090
3091 /* IOC *must* NOT be in RESET state! */
3092 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3093 printk(KERN_ERR MYNAM
3094 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3095 ioc->name, ioc->last_state);
3096 return -44;
3097 }
3098
3099 facts = &ioc->facts;
3100
3101 /* Destination (reply area)... */
3102 reply_sz = sizeof(*facts);
3103 memset(facts, 0, reply_sz);
3104
3105 /* Request area (get_facts on the stack right now!) */
3106 req_sz = sizeof(get_facts);
3107 memset(&get_facts, 0, req_sz);
3108
3109 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3110 /* Assert: All other get_facts fields are zero! */
3111
3112 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3113 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3114 ioc->name, req_sz, reply_sz));
3115
3116 /* No non-zero fields in the get_facts request are greater than
3117 * 1 byte in size, so we can just fire it off as is.
3118 */
3119 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3120 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3121 if (r != 0)
3122 return r;
3123
3124 /*
3125 * Now byte swap (GRRR) the necessary fields before any further
3126 * inspection of reply contents.
3127 *
3128 * But need to do some sanity checks on MsgLength (byte) field
3129 * to make sure we don't zero IOC's req_sz!
3130 */
3131 /* Did we get a valid reply? */
3132 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3133 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3134 /*
3135 * If not been here, done that, save off first WhoInit value
3136 */
3137 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3138 ioc->FirstWhoInit = facts->WhoInit;
3139 }
3140
3141 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3142 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3143 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3144 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3145 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3146 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3147 /* CHECKME! IOCStatus, IOCLogInfo */
3148
3149 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3150 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3151
3152 /*
3153 * FC f/w version changed between 1.1 and 1.2
3154 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3155 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3156 */
3157 if (facts->MsgVersion < MPI_VERSION_01_02) {
3158 /*
3159 * Handle old FC f/w style, convert to new...
3160 */
3161 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3162 facts->FWVersion.Word =
3163 ((oldv<<12) & 0xFF000000) |
3164 ((oldv<<8) & 0x000FFF00);
3165 } else
3166 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3167
3168 facts->ProductID = le16_to_cpu(facts->ProductID);
3169
3170 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3171 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3172 ioc->ir_firmware = 1;
3173
3174 facts->CurrentHostMfaHighAddr =
3175 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3176 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3177 facts->CurrentSenseBufferHighAddr =
3178 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3179 facts->CurReplyFrameSize =
3180 le16_to_cpu(facts->CurReplyFrameSize);
3181 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3182
3183 /*
3184 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3185 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3186 * to 14 in MPI-1.01.0x.
3187 */
3188 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3189 facts->MsgVersion > MPI_VERSION_01_00) {
3190 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3191 }
3192
3193 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3194
3195 if (!facts->RequestFrameSize) {
3196 /* Something is wrong! */
3197 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3198 ioc->name);
3199 return -55;
3200 }
3201
3202 r = sz = facts->BlockSize;
3203 vv = ((63 / (sz * 4)) + 1) & 0x03;
3204 ioc->NB_for_64_byte_frame = vv;
3205 while ( sz )
3206 {
3207 shiftFactor++;
3208 sz = sz >> 1;
3209 }
3210 ioc->NBShiftFactor = shiftFactor;
3211 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3212 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3213 ioc->name, vv, shiftFactor, r));
3214
3215 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3216 /*
3217 * Set values for this IOC's request & reply frame sizes,
3218 * and request & reply queue depths...
3219 */
3220 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3221 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3222 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3223 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3224
3225 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3226 ioc->name, ioc->reply_sz, ioc->reply_depth));
3227 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3228 ioc->name, ioc->req_sz, ioc->req_depth));
3229
3230 /* Get port facts! */
3231 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3232 return r;
3233 }
3234 } else {
3235 printk(MYIOC_s_ERR_FMT
3236 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3237 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3238 RequestFrameSize)/sizeof(u32)));
3239 return -66;
3240 }
3241
3242 return 0;
3243 }
3244
3245 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3246 /**
3247 * GetPortFacts - Send PortFacts request to MPT adapter.
3248 * @ioc: Pointer to MPT_ADAPTER structure
3249 * @portnum: Port number
3250 * @sleepFlag: Specifies whether the process can sleep
3251 *
3252 * Returns 0 for success, non-zero for failure.
3253 */
3254 static int
3255 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3256 {
3257 PortFacts_t get_pfacts;
3258 PortFactsReply_t *pfacts;
3259 int ii;
3260 int req_sz;
3261 int reply_sz;
3262 int max_id;
3263
3264 /* IOC *must* NOT be in RESET state! */
3265 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3266 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3267 ioc->name, ioc->last_state );
3268 return -4;
3269 }
3270
3271 pfacts = &ioc->pfacts[portnum];
3272
3273 /* Destination (reply area)... */
3274 reply_sz = sizeof(*pfacts);
3275 memset(pfacts, 0, reply_sz);
3276
3277 /* Request area (get_pfacts on the stack right now!) */
3278 req_sz = sizeof(get_pfacts);
3279 memset(&get_pfacts, 0, req_sz);
3280
3281 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3282 get_pfacts.PortNumber = portnum;
3283 /* Assert: All other get_pfacts fields are zero! */
3284
3285 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3286 ioc->name, portnum));
3287
3288 /* No non-zero fields in the get_pfacts request are greater than
3289 * 1 byte in size, so we can just fire it off as is.
3290 */
3291 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3292 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3293 if (ii != 0)
3294 return ii;
3295
3296 /* Did we get a valid reply? */
3297
3298 /* Now byte swap the necessary fields in the response. */
3299 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3300 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3301 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3302 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3303 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3304 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3305 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3306 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3307 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3308
3309 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3310 pfacts->MaxDevices;
3311 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3312 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3313
3314 /*
3315 * Place all the devices on channels
3316 *
3317 * (for debuging)
3318 */
3319 if (mpt_channel_mapping) {
3320 ioc->devices_per_bus = 1;
3321 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3322 }
3323
3324 return 0;
3325 }
3326
3327 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3328 /**
3329 * SendIocInit - Send IOCInit request to MPT adapter.
3330 * @ioc: Pointer to MPT_ADAPTER structure
3331 * @sleepFlag: Specifies whether the process can sleep
3332 *
3333 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3334 *
3335 * Returns 0 for success, non-zero for failure.
3336 */
3337 static int
3338 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3339 {
3340 IOCInit_t ioc_init;
3341 MPIDefaultReply_t init_reply;
3342 u32 state;
3343 int r;
3344 int count;
3345 int cntdn;
3346
3347 memset(&ioc_init, 0, sizeof(ioc_init));
3348 memset(&init_reply, 0, sizeof(init_reply));
3349
3350 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3351 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3352
3353 /* If we are in a recovery mode and we uploaded the FW image,
3354 * then this pointer is not NULL. Skip the upload a second time.
3355 * Set this flag if cached_fw set for either IOC.
3356 */
3357 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3358 ioc->upload_fw = 1;
3359 else
3360 ioc->upload_fw = 0;
3361 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3362 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3363
3364 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3365 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3366
3367 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3368 ioc->name, ioc->facts.MsgVersion));
3369 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3370 // set MsgVersion and HeaderVersion host driver was built with
3371 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3372 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3373
3374 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3375 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3376 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3377 return -99;
3378 }
3379 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3380
3381 if (ioc->sg_addr_size == sizeof(u64)) {
3382 /* Save the upper 32-bits of the request
3383 * (reply) and sense buffers.
3384 */
3385 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3386 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3387 } else {
3388 /* Force 32-bit addressing */
3389 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3390 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3391 }
3392
3393 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3394 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3395 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3396 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3397
3398 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3399 ioc->name, &ioc_init));
3400
3401 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3402 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3403 if (r != 0) {
3404 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3405 return r;
3406 }
3407
3408 /* No need to byte swap the multibyte fields in the reply
3409 * since we don't even look at its contents.
3410 */
3411
3412 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3413 ioc->name, &ioc_init));
3414
3415 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3416 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3417 return r;
3418 }
3419
3420 /* YIKES! SUPER IMPORTANT!!!
3421 * Poll IocState until _OPERATIONAL while IOC is doing
3422 * LoopInit and TargetDiscovery!
3423 */
3424 count = 0;
3425 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3426 state = mpt_GetIocState(ioc, 1);
3427 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3428 if (sleepFlag == CAN_SLEEP) {
3429 msleep(1);
3430 } else {
3431 mdelay(1);
3432 }
3433
3434 if (!cntdn) {
3435 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3436 ioc->name, (int)((count+5)/HZ));
3437 return -9;
3438 }
3439
3440 state = mpt_GetIocState(ioc, 1);
3441 count++;
3442 }
3443 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3444 ioc->name, count));
3445
3446 ioc->aen_event_read_flag=0;
3447 return r;
3448 }
3449
3450 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3451 /**
3452 * SendPortEnable - Send PortEnable request to MPT adapter port.
3453 * @ioc: Pointer to MPT_ADAPTER structure
3454 * @portnum: Port number to enable
3455 * @sleepFlag: Specifies whether the process can sleep
3456 *
3457 * Send PortEnable to bring IOC to OPERATIONAL state.
3458 *
3459 * Returns 0 for success, non-zero for failure.
3460 */
3461 static int
3462 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3463 {
3464 PortEnable_t port_enable;
3465 MPIDefaultReply_t reply_buf;
3466 int rc;
3467 int req_sz;
3468 int reply_sz;
3469
3470 /* Destination... */
3471 reply_sz = sizeof(MPIDefaultReply_t);
3472 memset(&reply_buf, 0, reply_sz);
3473
3474 req_sz = sizeof(PortEnable_t);
3475 memset(&port_enable, 0, req_sz);
3476
3477 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3478 port_enable.PortNumber = portnum;
3479 /* port_enable.ChainOffset = 0; */
3480 /* port_enable.MsgFlags = 0; */
3481 /* port_enable.MsgContext = 0; */
3482
3483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3484 ioc->name, portnum, &port_enable));
3485
3486 /* RAID FW may take a long time to enable
3487 */
3488 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3489 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3490 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3491 300 /*seconds*/, sleepFlag);
3492 } else {
3493 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3494 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3495 30 /*seconds*/, sleepFlag);
3496 }
3497 return rc;
3498 }
3499
3500 /**
3501 * mpt_alloc_fw_memory - allocate firmware memory
3502 * @ioc: Pointer to MPT_ADAPTER structure
3503 * @size: total FW bytes
3504 *
3505 * If memory has already been allocated, the same (cached) value
3506 * is returned.
3507 *
3508 * Return 0 if successful, or non-zero for failure
3509 **/
3510 int
3511 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3512 {
3513 int rc;
3514
3515 if (ioc->cached_fw) {
3516 rc = 0; /* use already allocated memory */
3517 goto out;
3518 }
3519 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3520 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3521 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3522 rc = 0;
3523 goto out;
3524 }
3525 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3526 if (!ioc->cached_fw) {
3527 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3528 ioc->name);
3529 rc = -1;
3530 } else {
3531 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3532 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3533 ioc->alloc_total += size;
3534 rc = 0;
3535 }
3536 out:
3537 return rc;
3538 }
3539
3540 /**
3541 * mpt_free_fw_memory - free firmware memory
3542 * @ioc: Pointer to MPT_ADAPTER structure
3543 *
3544 * If alt_img is NULL, delete from ioc structure.
3545 * Else, delete a secondary image in same format.
3546 **/
3547 void
3548 mpt_free_fw_memory(MPT_ADAPTER *ioc)
3549 {
3550 int sz;
3551
3552 if (!ioc->cached_fw)
3553 return;
3554
3555 sz = ioc->facts.FWImageSize;
3556 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3557 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3558 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3559 ioc->alloc_total -= sz;
3560 ioc->cached_fw = NULL;
3561 }
3562
3563 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3564 /**
3565 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3566 * @ioc: Pointer to MPT_ADAPTER structure
3567 * @sleepFlag: Specifies whether the process can sleep
3568 *
3569 * Returns 0 for success, >0 for handshake failure
3570 * <0 for fw upload failure.
3571 *
3572 * Remark: If bound IOC and a successful FWUpload was performed
3573 * on the bound IOC, the second image is discarded
3574 * and memory is free'd. Both channels must upload to prevent
3575 * IOC from running in degraded mode.
3576 */
3577 static int
3578 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3579 {
3580 u8 reply[sizeof(FWUploadReply_t)];
3581 FWUpload_t *prequest;
3582 FWUploadReply_t *preply;
3583 FWUploadTCSGE_t *ptcsge;
3584 u32 flagsLength;
3585 int ii, sz, reply_sz;
3586 int cmdStatus;
3587 int request_size;
3588 /* If the image size is 0, we are done.
3589 */
3590 if ((sz = ioc->facts.FWImageSize) == 0)
3591 return 0;
3592
3593 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3594 return -ENOMEM;
3595
3596 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3597 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3598
3599 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3600 kzalloc(ioc->req_sz, GFP_KERNEL);
3601 if (!prequest) {
3602 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3603 "while allocating memory \n", ioc->name));
3604 mpt_free_fw_memory(ioc);
3605 return -ENOMEM;
3606 }
3607
3608 preply = (FWUploadReply_t *)&reply;
3609
3610 reply_sz = sizeof(reply);
3611 memset(preply, 0, reply_sz);
3612
3613 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3614 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3615
3616 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3617 ptcsge->DetailsLength = 12;
3618 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3619 ptcsge->ImageSize = cpu_to_le32(sz);
3620 ptcsge++;
3621
3622 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3623 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3624 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3625 ioc->SGE_size;
3626 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3627 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3628 ioc->facts.FWImageSize, request_size));
3629 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3630
3631 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3632 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3633
3634 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3635 "rc=%x \n", ioc->name, ii));
3636
3637 cmdStatus = -EFAULT;
3638 if (ii == 0) {
3639 /* Handshake transfer was complete and successful.
3640 * Check the Reply Frame.
3641 */
3642 int status;
3643 status = le16_to_cpu(preply->IOCStatus) &
3644 MPI_IOCSTATUS_MASK;
3645 if (status == MPI_IOCSTATUS_SUCCESS &&
3646 ioc->facts.FWImageSize ==
3647 le32_to_cpu(preply->ActualImageSize))
3648 cmdStatus = 0;
3649 }
3650 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3651 ioc->name, cmdStatus));
3652
3653
3654 if (cmdStatus) {
3655 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3656 "freeing image \n", ioc->name));
3657 mpt_free_fw_memory(ioc);
3658 }
3659 kfree(prequest);
3660
3661 return cmdStatus;
3662 }
3663
3664 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3665 /**
3666 * mpt_downloadboot - DownloadBoot code
3667 * @ioc: Pointer to MPT_ADAPTER structure
3668 * @pFwHeader: Pointer to firmware header info
3669 * @sleepFlag: Specifies whether the process can sleep
3670 *
3671 * FwDownloadBoot requires Programmed IO access.
3672 *
3673 * Returns 0 for success
3674 * -1 FW Image size is 0
3675 * -2 No valid cached_fw Pointer
3676 * <0 for fw upload failure.
3677 */
3678 static int
3679 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3680 {
3681 MpiExtImageHeader_t *pExtImage;
3682 u32 fwSize;
3683 u32 diag0val;
3684 int count;
3685 u32 *ptrFw;
3686 u32 diagRwData;
3687 u32 nextImage;
3688 u32 load_addr;
3689 u32 ioc_state=0;
3690
3691 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3692 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3693
3694 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3695 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3696 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3697 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3698 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3699 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3700
3701 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3702
3703 /* wait 1 msec */
3704 if (sleepFlag == CAN_SLEEP) {
3705 msleep(1);
3706 } else {
3707 mdelay (1);
3708 }
3709
3710 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3711 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3712
3713 for (count = 0; count < 30; count ++) {
3714 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3715 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3716 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3717 ioc->name, count));
3718 break;
3719 }
3720 /* wait .1 sec */
3721 if (sleepFlag == CAN_SLEEP) {
3722 msleep (100);
3723 } else {
3724 mdelay (100);
3725 }
3726 }
3727
3728 if ( count == 30 ) {
3729 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3730 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3731 ioc->name, diag0val));
3732 return -3;
3733 }
3734
3735 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3736 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3737 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3738 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3739 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3740 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3741
3742 /* Set the DiagRwEn and Disable ARM bits */
3743 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3744
3745 fwSize = (pFwHeader->ImageSize + 3)/4;
3746 ptrFw = (u32 *) pFwHeader;
3747
3748 /* Write the LoadStartAddress to the DiagRw Address Register
3749 * using Programmed IO
3750 */
3751 if (ioc->errata_flag_1064)
3752 pci_enable_io_access(ioc->pcidev);
3753
3754 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3755 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3756 ioc->name, pFwHeader->LoadStartAddress));
3757
3758 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3759 ioc->name, fwSize*4, ptrFw));
3760 while (fwSize--) {
3761 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3762 }
3763
3764 nextImage = pFwHeader->NextImageHeaderOffset;
3765 while (nextImage) {
3766 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3767
3768 load_addr = pExtImage->LoadStartAddress;
3769
3770 fwSize = (pExtImage->ImageSize + 3) >> 2;
3771 ptrFw = (u32 *)pExtImage;
3772
3773 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3774 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3775 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3776
3777 while (fwSize--) {
3778 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3779 }
3780 nextImage = pExtImage->NextImageHeaderOffset;
3781 }
3782
3783 /* Write the IopResetVectorRegAddr */
3784 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3785 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3786
3787 /* Write the IopResetVectorValue */
3788 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3789 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3790
3791 /* Clear the internal flash bad bit - autoincrementing register,
3792 * so must do two writes.
3793 */
3794 if (ioc->bus_type == SPI) {
3795 /*
3796 * 1030 and 1035 H/W errata, workaround to access
3797 * the ClearFlashBadSignatureBit
3798 */
3799 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3800 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3801 diagRwData |= 0x40000000;
3802 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3803 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3804
3805 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3806 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3807 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3808 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3809
3810 /* wait 1 msec */
3811 if (sleepFlag == CAN_SLEEP) {
3812 msleep (1);
3813 } else {
3814 mdelay (1);
3815 }
3816 }
3817
3818 if (ioc->errata_flag_1064)
3819 pci_disable_io_access(ioc->pcidev);
3820
3821 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3822 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3823 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3824 ioc->name, diag0val));
3825 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3826 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3827 ioc->name, diag0val));
3828 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3829
3830 /* Write 0xFF to reset the sequencer */
3831 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3832
3833 if (ioc->bus_type == SAS) {
3834 ioc_state = mpt_GetIocState(ioc, 0);
3835 if ( (GetIocFacts(ioc, sleepFlag,
3836 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3837 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3838 ioc->name, ioc_state));
3839 return -EFAULT;
3840 }
3841 }
3842
3843 for (count=0; count<HZ*20; count++) {
3844 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3845 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3846 "downloadboot successful! (count=%d) IocState=%x\n",
3847 ioc->name, count, ioc_state));
3848 if (ioc->bus_type == SAS) {
3849 return 0;
3850 }
3851 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3852 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3853 "downloadboot: SendIocInit failed\n",
3854 ioc->name));
3855 return -EFAULT;
3856 }
3857 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3858 "downloadboot: SendIocInit successful\n",
3859 ioc->name));
3860 return 0;
3861 }
3862 if (sleepFlag == CAN_SLEEP) {
3863 msleep (10);
3864 } else {
3865 mdelay (10);
3866 }
3867 }
3868 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3869 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3870 return -EFAULT;
3871 }
3872
3873 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3874 /**
3875 * KickStart - Perform hard reset of MPT adapter.
3876 * @ioc: Pointer to MPT_ADAPTER structure
3877 * @force: Force hard reset
3878 * @sleepFlag: Specifies whether the process can sleep
3879 *
3880 * This routine places MPT adapter in diagnostic mode via the
3881 * WriteSequence register, and then performs a hard reset of adapter
3882 * via the Diagnostic register.
3883 *
3884 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3885 * or NO_SLEEP (interrupt thread, use mdelay)
3886 * force - 1 if doorbell active, board fault state
3887 * board operational, IOC_RECOVERY or
3888 * IOC_BRINGUP and there is an alt_ioc.
3889 * 0 else
3890 *
3891 * Returns:
3892 * 1 - hard reset, READY
3893 * 0 - no reset due to History bit, READY
3894 * -1 - no reset due to History bit but not READY
3895 * OR reset but failed to come READY
3896 * -2 - no reset, could not enter DIAG mode
3897 * -3 - reset but bad FW bit
3898 */
3899 static int
3900 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3901 {
3902 int hard_reset_done = 0;
3903 u32 ioc_state=0;
3904 int cnt,cntdn;
3905
3906 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3907 if (ioc->bus_type == SPI) {
3908 /* Always issue a Msg Unit Reset first. This will clear some
3909 * SCSI bus hang conditions.
3910 */
3911 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3912
3913 if (sleepFlag == CAN_SLEEP) {
3914 msleep (1000);
3915 } else {
3916 mdelay (1000);
3917 }
3918 }
3919
3920 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3921 if (hard_reset_done < 0)
3922 return hard_reset_done;
3923
3924 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3925 ioc->name));
3926
3927 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3928 for (cnt=0; cnt<cntdn; cnt++) {
3929 ioc_state = mpt_GetIocState(ioc, 1);
3930 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3931 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3932 ioc->name, cnt));
3933 return hard_reset_done;
3934 }
3935 if (sleepFlag == CAN_SLEEP) {
3936 msleep (10);
3937 } else {
3938 mdelay (10);
3939 }
3940 }
3941
3942 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3943 ioc->name, mpt_GetIocState(ioc, 0)));
3944 return -1;
3945 }
3946
3947 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3948 /**
3949 * mpt_diag_reset - Perform hard reset of the adapter.
3950 * @ioc: Pointer to MPT_ADAPTER structure
3951 * @ignore: Set if to honor and clear to ignore
3952 * the reset history bit
3953 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3954 * else set to NO_SLEEP (use mdelay instead)
3955 *
3956 * This routine places the adapter in diagnostic mode via the
3957 * WriteSequence register and then performs a hard reset of adapter
3958 * via the Diagnostic register. Adapter should be in ready state
3959 * upon successful completion.
3960 *
3961 * Returns: 1 hard reset successful
3962 * 0 no reset performed because reset history bit set
3963 * -2 enabling diagnostic mode failed
3964 * -3 diagnostic reset failed
3965 */
3966 static int
3967 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3968 {
3969 u32 diag0val;
3970 u32 doorbell;
3971 int hard_reset_done = 0;
3972 int count = 0;
3973 u32 diag1val = 0;
3974 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3975 u8 cb_idx;
3976
3977 /* Clear any existing interrupts */
3978 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3979
3980 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3981
3982 if (!ignore)
3983 return 0;
3984
3985 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3986 "address=%p\n", ioc->name, __func__,
3987 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3988 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3989 if (sleepFlag == CAN_SLEEP)
3990 msleep(1);
3991 else
3992 mdelay(1);
3993
3994 /*
3995 * Call each currently registered protocol IOC reset handler
3996 * with pre-reset indication.
3997 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3998 * MptResetHandlers[] registered yet.
3999 */
4000 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4001 if (MptResetHandlers[cb_idx])
4002 (*(MptResetHandlers[cb_idx]))(ioc,
4003 MPT_IOC_PRE_RESET);
4004 }
4005
4006 for (count = 0; count < 60; count ++) {
4007 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4008 doorbell &= MPI_IOC_STATE_MASK;
4009
4010 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4011 "looking for READY STATE: doorbell=%x"
4012 " count=%d\n",
4013 ioc->name, doorbell, count));
4014
4015 if (doorbell == MPI_IOC_STATE_READY) {
4016 return 1;
4017 }
4018
4019 /* wait 1 sec */
4020 if (sleepFlag == CAN_SLEEP)
4021 msleep(1000);
4022 else
4023 mdelay(1000);
4024 }
4025 return -1;
4026 }
4027
4028 /* Use "Diagnostic reset" method! (only thing available!) */
4029 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4030
4031 if (ioc->debug_level & MPT_DEBUG) {
4032 if (ioc->alt_ioc)
4033 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4034 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4035 ioc->name, diag0val, diag1val));
4036 }
4037
4038 /* Do the reset if we are told to ignore the reset history
4039 * or if the reset history is 0
4040 */
4041 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4042 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4043 /* Write magic sequence to WriteSequence register
4044 * Loop until in diagnostic mode
4045 */
4046 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4047 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4048 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4049 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4050 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4051 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4052
4053 /* wait 100 msec */
4054 if (sleepFlag == CAN_SLEEP) {
4055 msleep (100);
4056 } else {
4057 mdelay (100);
4058 }
4059
4060 count++;
4061 if (count > 20) {
4062 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4063 ioc->name, diag0val);
4064 return -2;
4065
4066 }
4067
4068 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4069
4070 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4071 ioc->name, diag0val));
4072 }
4073
4074 if (ioc->debug_level & MPT_DEBUG) {
4075 if (ioc->alt_ioc)
4076 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4077 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4078 ioc->name, diag0val, diag1val));
4079 }
4080 /*
4081 * Disable the ARM (Bug fix)
4082 *
4083 */
4084 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4085 mdelay(1);
4086
4087 /*
4088 * Now hit the reset bit in the Diagnostic register
4089 * (THE BIG HAMMER!) (Clears DRWE bit).
4090 */
4091 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4092 hard_reset_done = 1;
4093 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4094 ioc->name));
4095
4096 /*
4097 * Call each currently registered protocol IOC reset handler
4098 * with pre-reset indication.
4099 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4100 * MptResetHandlers[] registered yet.
4101 */
4102 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4103 if (MptResetHandlers[cb_idx]) {
4104 mpt_signal_reset(cb_idx,
4105 ioc, MPT_IOC_PRE_RESET);
4106 if (ioc->alt_ioc) {
4107 mpt_signal_reset(cb_idx,
4108 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4109 }
4110 }
4111 }
4112
4113 if (ioc->cached_fw)
4114 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4115 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4116 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4117 else
4118 cached_fw = NULL;
4119 if (cached_fw) {
4120 /* If the DownloadBoot operation fails, the
4121 * IOC will be left unusable. This is a fatal error
4122 * case. _diag_reset will return < 0
4123 */
4124 for (count = 0; count < 30; count ++) {
4125 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4126 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4127 break;
4128 }
4129
4130 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4131 ioc->name, diag0val, count));
4132 /* wait 1 sec */
4133 if (sleepFlag == CAN_SLEEP) {
4134 msleep (1000);
4135 } else {
4136 mdelay (1000);
4137 }
4138 }
4139 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4140 printk(MYIOC_s_WARN_FMT
4141 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4142 }
4143
4144 } else {
4145 /* Wait for FW to reload and for board
4146 * to go to the READY state.
4147 * Maximum wait is 60 seconds.
4148 * If fail, no error will check again
4149 * with calling program.
4150 */
4151 for (count = 0; count < 60; count ++) {
4152 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4153 doorbell &= MPI_IOC_STATE_MASK;
4154
4155 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4156 "looking for READY STATE: doorbell=%x"
4157 " count=%d\n", ioc->name, doorbell, count));
4158
4159 if (doorbell == MPI_IOC_STATE_READY) {
4160 break;
4161 }
4162
4163 /* wait 1 sec */
4164 if (sleepFlag == CAN_SLEEP) {
4165 msleep (1000);
4166 } else {
4167 mdelay (1000);
4168 }
4169 }
4170
4171 if (doorbell != MPI_IOC_STATE_READY)
4172 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4173 "after reset! IocState=%x", ioc->name,
4174 doorbell);
4175 }
4176 }
4177
4178 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4179 if (ioc->debug_level & MPT_DEBUG) {
4180 if (ioc->alt_ioc)
4181 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4182 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4183 ioc->name, diag0val, diag1val));
4184 }
4185
4186 /* Clear RESET_HISTORY bit! Place board in the
4187 * diagnostic mode to update the diag register.
4188 */
4189 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4190 count = 0;
4191 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4192 /* Write magic sequence to WriteSequence register
4193 * Loop until in diagnostic mode
4194 */
4195 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4196 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4197 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4198 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4199 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4200 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4201
4202 /* wait 100 msec */
4203 if (sleepFlag == CAN_SLEEP) {
4204 msleep (100);
4205 } else {
4206 mdelay (100);
4207 }
4208
4209 count++;
4210 if (count > 20) {
4211 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4212 ioc->name, diag0val);
4213 break;
4214 }
4215 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4216 }
4217 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4218 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4219 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4220 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4221 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4222 ioc->name);
4223 }
4224
4225 /* Disable Diagnostic Mode
4226 */
4227 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4228
4229 /* Check FW reload status flags.
4230 */
4231 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4232 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4233 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4234 ioc->name, diag0val);
4235 return -3;
4236 }
4237
4238 if (ioc->debug_level & MPT_DEBUG) {
4239 if (ioc->alt_ioc)
4240 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4241 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4242 ioc->name, diag0val, diag1val));
4243 }
4244
4245 /*
4246 * Reset flag that says we've enabled event notification
4247 */
4248 ioc->facts.EventState = 0;
4249
4250 if (ioc->alt_ioc)
4251 ioc->alt_ioc->facts.EventState = 0;
4252
4253 return hard_reset_done;
4254 }
4255
4256 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4257 /**
4258 * SendIocReset - Send IOCReset request to MPT adapter.
4259 * @ioc: Pointer to MPT_ADAPTER structure
4260 * @reset_type: reset type, expected values are
4261 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4262 * @sleepFlag: Specifies whether the process can sleep
4263 *
4264 * Send IOCReset request to the MPT adapter.
4265 *
4266 * Returns 0 for success, non-zero for failure.
4267 */
4268 static int
4269 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4270 {
4271 int r;
4272 u32 state;
4273 int cntdn, count;
4274
4275 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4276 ioc->name, reset_type));
4277 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4278 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4279 return r;
4280
4281 /* FW ACK'd request, wait for READY state
4282 */
4283 count = 0;
4284 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4285
4286 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4287 cntdn--;
4288 count++;
4289 if (!cntdn) {
4290 if (sleepFlag != CAN_SLEEP)
4291 count *= 10;
4292
4293 printk(MYIOC_s_ERR_FMT
4294 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4295 ioc->name, state, (int)((count+5)/HZ));
4296 return -ETIME;
4297 }
4298
4299 if (sleepFlag == CAN_SLEEP) {
4300 msleep(1);
4301 } else {
4302 mdelay (1); /* 1 msec delay */
4303 }
4304 }
4305
4306 /* TODO!
4307 * Cleanup all event stuff for this IOC; re-issue EventNotification
4308 * request if needed.
4309 */
4310 if (ioc->facts.Function)
4311 ioc->facts.EventState = 0;
4312
4313 return 0;
4314 }
4315
4316 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4317 /**
4318 * initChainBuffers - Allocate memory for and initialize chain buffers
4319 * @ioc: Pointer to MPT_ADAPTER structure
4320 *
4321 * Allocates memory for and initializes chain buffers,
4322 * chain buffer control arrays and spinlock.
4323 */
4324 static int
4325 initChainBuffers(MPT_ADAPTER *ioc)
4326 {
4327 u8 *mem;
4328 int sz, ii, num_chain;
4329 int scale, num_sge, numSGE;
4330
4331 /* ReqToChain size must equal the req_depth
4332 * index = req_idx
4333 */
4334 if (ioc->ReqToChain == NULL) {
4335 sz = ioc->req_depth * sizeof(int);
4336 mem = kmalloc(sz, GFP_ATOMIC);
4337 if (mem == NULL)
4338 return -1;
4339
4340 ioc->ReqToChain = (int *) mem;
4341 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4342 ioc->name, mem, sz));
4343 mem = kmalloc(sz, GFP_ATOMIC);
4344 if (mem == NULL)
4345 return -1;
4346
4347 ioc->RequestNB = (int *) mem;
4348 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4349 ioc->name, mem, sz));
4350 }
4351 for (ii = 0; ii < ioc->req_depth; ii++) {
4352 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4353 }
4354
4355 /* ChainToChain size must equal the total number
4356 * of chain buffers to be allocated.
4357 * index = chain_idx
4358 *
4359 * Calculate the number of chain buffers needed(plus 1) per I/O
4360 * then multiply the maximum number of simultaneous cmds
4361 *
4362 * num_sge = num sge in request frame + last chain buffer
4363 * scale = num sge per chain buffer if no chain element
4364 */
4365 scale = ioc->req_sz / ioc->SGE_size;
4366 if (ioc->sg_addr_size == sizeof(u64))
4367 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4368 else
4369 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4370
4371 if (ioc->sg_addr_size == sizeof(u64)) {
4372 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4373 (ioc->req_sz - 60) / ioc->SGE_size;
4374 } else {
4375 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4376 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4377 }
4378 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4379 ioc->name, num_sge, numSGE));
4380
4381 if (ioc->bus_type == FC) {
4382 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4383 numSGE = MPT_SCSI_FC_SG_DEPTH;
4384 } else {
4385 if (numSGE > MPT_SCSI_SG_DEPTH)
4386 numSGE = MPT_SCSI_SG_DEPTH;
4387 }
4388
4389 num_chain = 1;
4390 while (numSGE - num_sge > 0) {
4391 num_chain++;
4392 num_sge += (scale - 1);
4393 }
4394 num_chain++;
4395
4396 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4397 ioc->name, numSGE, num_sge, num_chain));
4398
4399 if (ioc->bus_type == SPI)
4400 num_chain *= MPT_SCSI_CAN_QUEUE;
4401 else if (ioc->bus_type == SAS)
4402 num_chain *= MPT_SAS_CAN_QUEUE;
4403 else
4404 num_chain *= MPT_FC_CAN_QUEUE;
4405
4406 ioc->num_chain = num_chain;
4407
4408 sz = num_chain * sizeof(int);
4409 if (ioc->ChainToChain == NULL) {
4410 mem = kmalloc(sz, GFP_ATOMIC);
4411 if (mem == NULL)
4412 return -1;
4413
4414 ioc->ChainToChain = (int *) mem;
4415 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4416 ioc->name, mem, sz));
4417 } else {
4418 mem = (u8 *) ioc->ChainToChain;
4419 }
4420 memset(mem, 0xFF, sz);
4421 return num_chain;
4422 }
4423
4424 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4425 /**
4426 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4427 * @ioc: Pointer to MPT_ADAPTER structure
4428 *
4429 * This routine allocates memory for the MPT reply and request frame
4430 * pools (if necessary), and primes the IOC reply FIFO with
4431 * reply frames.
4432 *
4433 * Returns 0 for success, non-zero for failure.
4434 */
4435 static int
4436 PrimeIocFifos(MPT_ADAPTER *ioc)
4437 {
4438 MPT_FRAME_HDR *mf;
4439 unsigned long flags;
4440 dma_addr_t alloc_dma;
4441 u8 *mem;
4442 int i, reply_sz, sz, total_size, num_chain;
4443 u64 dma_mask;
4444
4445 dma_mask = 0;
4446
4447 /* Prime reply FIFO... */
4448
4449 if (ioc->reply_frames == NULL) {
4450 if ( (num_chain = initChainBuffers(ioc)) < 0)
4451 return -1;
4452 /*
4453 * 1078 errata workaround for the 36GB limitation
4454 */
4455 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4456 ioc->dma_mask > DMA_BIT_MASK(35)) {
4457 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4458 && !pci_set_consistent_dma_mask(ioc->pcidev,
4459 DMA_BIT_MASK(32))) {
4460 dma_mask = DMA_BIT_MASK(35);
4461 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4462 "setting 35 bit addressing for "
4463 "Request/Reply/Chain and Sense Buffers\n",
4464 ioc->name));
4465 } else {
4466 /*Reseting DMA mask to 64 bit*/
4467 pci_set_dma_mask(ioc->pcidev,
4468 DMA_BIT_MASK(64));
4469 pci_set_consistent_dma_mask(ioc->pcidev,
4470 DMA_BIT_MASK(64));
4471
4472 printk(MYIOC_s_ERR_FMT
4473 "failed setting 35 bit addressing for "
4474 "Request/Reply/Chain and Sense Buffers\n",
4475 ioc->name);
4476 return -1;
4477 }
4478 }
4479
4480 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4482 ioc->name, ioc->reply_sz, ioc->reply_depth));
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4484 ioc->name, reply_sz, reply_sz));
4485
4486 sz = (ioc->req_sz * ioc->req_depth);
4487 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4488 ioc->name, ioc->req_sz, ioc->req_depth));
4489 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4490 ioc->name, sz, sz));
4491 total_size += sz;
4492
4493 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4494 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4495 ioc->name, ioc->req_sz, num_chain));
4496 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4497 ioc->name, sz, sz, num_chain));
4498
4499 total_size += sz;
4500 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4501 if (mem == NULL) {
4502 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4503 ioc->name);
4504 goto out_fail;
4505 }
4506
4507 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4508 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4509
4510 memset(mem, 0, total_size);
4511 ioc->alloc_total += total_size;
4512 ioc->alloc = mem;
4513 ioc->alloc_dma = alloc_dma;
4514 ioc->alloc_sz = total_size;
4515 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4516 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4517
4518 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4519 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4520
4521 alloc_dma += reply_sz;
4522 mem += reply_sz;
4523
4524 /* Request FIFO - WE manage this! */
4525
4526 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4527 ioc->req_frames_dma = alloc_dma;
4528
4529 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4530 ioc->name, mem, (void *)(ulong)alloc_dma));
4531
4532 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4533
4534 for (i = 0; i < ioc->req_depth; i++) {
4535 alloc_dma += ioc->req_sz;
4536 mem += ioc->req_sz;
4537 }
4538
4539 ioc->ChainBuffer = mem;
4540 ioc->ChainBufferDMA = alloc_dma;
4541
4542 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4543 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4544
4545 /* Initialize the free chain Q.
4546 */
4547
4548 INIT_LIST_HEAD(&ioc->FreeChainQ);
4549
4550 /* Post the chain buffers to the FreeChainQ.
4551 */
4552 mem = (u8 *)ioc->ChainBuffer;
4553 for (i=0; i < num_chain; i++) {
4554 mf = (MPT_FRAME_HDR *) mem;
4555 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4556 mem += ioc->req_sz;
4557 }
4558
4559 /* Initialize Request frames linked list
4560 */
4561 alloc_dma = ioc->req_frames_dma;
4562 mem = (u8 *) ioc->req_frames;
4563
4564 spin_lock_irqsave(&ioc->FreeQlock, flags);
4565 INIT_LIST_HEAD(&ioc->FreeQ);
4566 for (i = 0; i < ioc->req_depth; i++) {
4567 mf = (MPT_FRAME_HDR *) mem;
4568
4569 /* Queue REQUESTs *internally*! */
4570 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4571
4572 mem += ioc->req_sz;
4573 }
4574 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4575
4576 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4577 ioc->sense_buf_pool =
4578 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4579 if (ioc->sense_buf_pool == NULL) {
4580 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4581 ioc->name);
4582 goto out_fail;
4583 }
4584
4585 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4586 ioc->alloc_total += sz;
4587 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4588 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4589
4590 }
4591
4592 /* Post Reply frames to FIFO
4593 */
4594 alloc_dma = ioc->alloc_dma;
4595 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4596 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4597
4598 for (i = 0; i < ioc->reply_depth; i++) {
4599 /* Write each address to the IOC! */
4600 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4601 alloc_dma += ioc->reply_sz;
4602 }
4603
4604 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4605 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4606 ioc->dma_mask))
4607 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4608 "restoring 64 bit addressing\n", ioc->name));
4609
4610 return 0;
4611
4612 out_fail:
4613
4614 if (ioc->alloc != NULL) {
4615 sz = ioc->alloc_sz;
4616 pci_free_consistent(ioc->pcidev,
4617 sz,
4618 ioc->alloc, ioc->alloc_dma);
4619 ioc->reply_frames = NULL;
4620 ioc->req_frames = NULL;
4621 ioc->alloc_total -= sz;
4622 }
4623 if (ioc->sense_buf_pool != NULL) {
4624 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4625 pci_free_consistent(ioc->pcidev,
4626 sz,
4627 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4628 ioc->sense_buf_pool = NULL;
4629 }
4630
4631 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4632 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4633 DMA_BIT_MASK(64)))
4634 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4635 "restoring 64 bit addressing\n", ioc->name));
4636
4637 return -1;
4638 }
4639
4640 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4641 /**
4642 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4643 * from IOC via doorbell handshake method.
4644 * @ioc: Pointer to MPT_ADAPTER structure
4645 * @reqBytes: Size of the request in bytes
4646 * @req: Pointer to MPT request frame
4647 * @replyBytes: Expected size of the reply in bytes
4648 * @u16reply: Pointer to area where reply should be written
4649 * @maxwait: Max wait time for a reply (in seconds)
4650 * @sleepFlag: Specifies whether the process can sleep
4651 *
4652 * NOTES: It is the callers responsibility to byte-swap fields in the
4653 * request which are greater than 1 byte in size. It is also the
4654 * callers responsibility to byte-swap response fields which are
4655 * greater than 1 byte in size.
4656 *
4657 * Returns 0 for success, non-zero for failure.
4658 */
4659 static int
4660 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4661 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4662 {
4663 MPIDefaultReply_t *mptReply;
4664 int failcnt = 0;
4665 int t;
4666
4667 /*
4668 * Get ready to cache a handshake reply
4669 */
4670 ioc->hs_reply_idx = 0;
4671 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4672 mptReply->MsgLength = 0;
4673
4674 /*
4675 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4676 * then tell IOC that we want to handshake a request of N words.
4677 * (WRITE u32val to Doorbell reg).
4678 */
4679 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4680 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4681 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4682 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4683
4684 /*
4685 * Wait for IOC's doorbell handshake int
4686 */
4687 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4688 failcnt++;
4689
4690 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4691 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4692
4693 /* Read doorbell and check for active bit */
4694 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4695 return -1;
4696
4697 /*
4698 * Clear doorbell int (WRITE 0 to IntStatus reg),
4699 * then wait for IOC to ACKnowledge that it's ready for
4700 * our handshake request.
4701 */
4702 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4703 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4704 failcnt++;
4705
4706 if (!failcnt) {
4707 int ii;
4708 u8 *req_as_bytes = (u8 *) req;
4709
4710 /*
4711 * Stuff request words via doorbell handshake,
4712 * with ACK from IOC for each.
4713 */
4714 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4715 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4716 (req_as_bytes[(ii*4) + 1] << 8) |
4717 (req_as_bytes[(ii*4) + 2] << 16) |
4718 (req_as_bytes[(ii*4) + 3] << 24));
4719
4720 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4721 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4722 failcnt++;
4723 }
4724
4725 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4726 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4727
4728 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4729 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4730
4731 /*
4732 * Wait for completion of doorbell handshake reply from the IOC
4733 */
4734 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4735 failcnt++;
4736
4737 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4738 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4739
4740 /*
4741 * Copy out the cached reply...
4742 */
4743 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4744 u16reply[ii] = ioc->hs_reply[ii];
4745 } else {
4746 return -99;
4747 }
4748
4749 return -failcnt;
4750 }
4751
4752 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4753 /**
4754 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4755 * @ioc: Pointer to MPT_ADAPTER structure
4756 * @howlong: How long to wait (in seconds)
4757 * @sleepFlag: Specifies whether the process can sleep
4758 *
4759 * This routine waits (up to ~2 seconds max) for IOC doorbell
4760 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4761 * bit in its IntStatus register being clear.
4762 *
4763 * Returns a negative value on failure, else wait loop count.
4764 */
4765 static int
4766 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4767 {
4768 int cntdn;
4769 int count = 0;
4770 u32 intstat=0;
4771
4772 cntdn = 1000 * howlong;
4773
4774 if (sleepFlag == CAN_SLEEP) {
4775 while (--cntdn) {
4776 msleep (1);
4777 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4778 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4779 break;
4780 count++;
4781 }
4782 } else {
4783 while (--cntdn) {
4784 udelay (1000);
4785 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4786 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4787 break;
4788 count++;
4789 }
4790 }
4791
4792 if (cntdn) {
4793 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4794 ioc->name, count));
4795 return count;
4796 }
4797
4798 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4799 ioc->name, count, intstat);
4800 return -1;
4801 }
4802
4803 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4804 /**
4805 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4806 * @ioc: Pointer to MPT_ADAPTER structure
4807 * @howlong: How long to wait (in seconds)
4808 * @sleepFlag: Specifies whether the process can sleep
4809 *
4810 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4811 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4812 *
4813 * Returns a negative value on failure, else wait loop count.
4814 */
4815 static int
4816 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4817 {
4818 int cntdn;
4819 int count = 0;
4820 u32 intstat=0;
4821
4822 cntdn = 1000 * howlong;
4823 if (sleepFlag == CAN_SLEEP) {
4824 while (--cntdn) {
4825 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4826 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4827 break;
4828 msleep(1);
4829 count++;
4830 }
4831 } else {
4832 while (--cntdn) {
4833 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4834 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4835 break;
4836 udelay (1000);
4837 count++;
4838 }
4839 }
4840
4841 if (cntdn) {
4842 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4843 ioc->name, count, howlong));
4844 return count;
4845 }
4846
4847 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4848 ioc->name, count, intstat);
4849 return -1;
4850 }
4851
4852 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4853 /**
4854 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4855 * @ioc: Pointer to MPT_ADAPTER structure
4856 * @howlong: How long to wait (in seconds)
4857 * @sleepFlag: Specifies whether the process can sleep
4858 *
4859 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4860 * Reply is cached to IOC private area large enough to hold a maximum
4861 * of 128 bytes of reply data.
4862 *
4863 * Returns a negative value on failure, else size of reply in WORDS.
4864 */
4865 static int
4866 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4867 {
4868 int u16cnt = 0;
4869 int failcnt = 0;
4870 int t;
4871 u16 *hs_reply = ioc->hs_reply;
4872 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4873 u16 hword;
4874
4875 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4876
4877 /*
4878 * Get first two u16's so we can look at IOC's intended reply MsgLength
4879 */
4880 u16cnt=0;
4881 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4882 failcnt++;
4883 } else {
4884 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4885 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4886 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4887 failcnt++;
4888 else {
4889 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4890 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4891 }
4892 }
4893
4894 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4895 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4896 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4897
4898 /*
4899 * If no error (and IOC said MsgLength is > 0), piece together
4900 * reply 16 bits at a time.
4901 */
4902 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4903 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4904 failcnt++;
4905 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4906 /* don't overflow our IOC hs_reply[] buffer! */
4907 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4908 hs_reply[u16cnt] = hword;
4909 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4910 }
4911
4912 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4913 failcnt++;
4914 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4915
4916 if (failcnt) {
4917 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4918 ioc->name);
4919 return -failcnt;
4920 }
4921 #if 0
4922 else if (u16cnt != (2 * mptReply->MsgLength)) {
4923 return -101;
4924 }
4925 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4926 return -102;
4927 }
4928 #endif
4929
4930 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4931 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4932
4933 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4934 ioc->name, t, u16cnt/2));
4935 return u16cnt/2;
4936 }
4937
4938 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4939 /**
4940 * GetLanConfigPages - Fetch LANConfig pages.
4941 * @ioc: Pointer to MPT_ADAPTER structure
4942 *
4943 * Return: 0 for success
4944 * -ENOMEM if no memory available
4945 * -EPERM if not allowed due to ISR context
4946 * -EAGAIN if no msg frames currently available
4947 * -EFAULT for non-successful reply or no reply (timeout)
4948 */
4949 static int
4950 GetLanConfigPages(MPT_ADAPTER *ioc)
4951 {
4952 ConfigPageHeader_t hdr;
4953 CONFIGPARMS cfg;
4954 LANPage0_t *ppage0_alloc;
4955 dma_addr_t page0_dma;
4956 LANPage1_t *ppage1_alloc;
4957 dma_addr_t page1_dma;
4958 int rc = 0;
4959 int data_sz;
4960 int copy_sz;
4961
4962 /* Get LAN Page 0 header */
4963 hdr.PageVersion = 0;
4964 hdr.PageLength = 0;
4965 hdr.PageNumber = 0;
4966 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4967 cfg.cfghdr.hdr = &hdr;
4968 cfg.physAddr = -1;
4969 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4970 cfg.dir = 0;
4971 cfg.pageAddr = 0;
4972 cfg.timeout = 0;
4973
4974 if ((rc = mpt_config(ioc, &cfg)) != 0)
4975 return rc;
4976
4977 if (hdr.PageLength > 0) {
4978 data_sz = hdr.PageLength * 4;
4979 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4980 rc = -ENOMEM;
4981 if (ppage0_alloc) {
4982 memset((u8 *)ppage0_alloc, 0, data_sz);
4983 cfg.physAddr = page0_dma;
4984 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4985
4986 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4987 /* save the data */
4988 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4989 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4990
4991 }
4992
4993 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4994
4995 /* FIXME!
4996 * Normalize endianness of structure data,
4997 * by byte-swapping all > 1 byte fields!
4998 */
4999
5000 }
5001
5002 if (rc)
5003 return rc;
5004 }
5005
5006 /* Get LAN Page 1 header */
5007 hdr.PageVersion = 0;
5008 hdr.PageLength = 0;
5009 hdr.PageNumber = 1;
5010 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5011 cfg.cfghdr.hdr = &hdr;
5012 cfg.physAddr = -1;
5013 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5014 cfg.dir = 0;
5015 cfg.pageAddr = 0;
5016
5017 if ((rc = mpt_config(ioc, &cfg)) != 0)
5018 return rc;
5019
5020 if (hdr.PageLength == 0)
5021 return 0;
5022
5023 data_sz = hdr.PageLength * 4;
5024 rc = -ENOMEM;
5025 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5026 if (ppage1_alloc) {
5027 memset((u8 *)ppage1_alloc, 0, data_sz);
5028 cfg.physAddr = page1_dma;
5029 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5030
5031 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5032 /* save the data */
5033 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5034 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5035 }
5036
5037 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5038
5039 /* FIXME!
5040 * Normalize endianness of structure data,
5041 * by byte-swapping all > 1 byte fields!
5042 */
5043
5044 }
5045
5046 return rc;
5047 }
5048
5049 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5050 /**
5051 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5052 * @ioc: Pointer to MPT_ADAPTER structure
5053 * @persist_opcode: see below
5054 *
5055 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
5056 * devices not currently present.
5057 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
5058 *
5059 * NOTE: Don't use not this function during interrupt time.
5060 *
5061 * Returns 0 for success, non-zero error
5062 */
5063
5064 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5065 int
5066 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5067 {
5068 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5069 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5070 MPT_FRAME_HDR *mf = NULL;
5071 MPIHeader_t *mpi_hdr;
5072 int ret = 0;
5073 unsigned long timeleft;
5074
5075 mutex_lock(&ioc->mptbase_cmds.mutex);
5076
5077 /* init the internal cmd struct */
5078 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5079 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5080
5081 /* insure garbage is not sent to fw */
5082 switch(persist_opcode) {
5083
5084 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5085 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5086 break;
5087
5088 default:
5089 ret = -1;
5090 goto out;
5091 }
5092
5093 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5094 __func__, persist_opcode);
5095
5096 /* Get a MF for this command.
5097 */
5098 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5099 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5100 ret = -1;
5101 goto out;
5102 }
5103
5104 mpi_hdr = (MPIHeader_t *) mf;
5105 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5106 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5107 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5108 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5109 sasIoUnitCntrReq->Operation = persist_opcode;
5110
5111 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5112 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5113 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5114 ret = -ETIME;
5115 printk(KERN_DEBUG "%s: failed\n", __func__);
5116 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5117 goto out;
5118 if (!timeleft) {
5119 printk(MYIOC_s_WARN_FMT
5120 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5121 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5122 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5123 mpt_free_msg_frame(ioc, mf);
5124 }
5125 goto out;
5126 }
5127
5128 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5129 ret = -1;
5130 goto out;
5131 }
5132
5133 sasIoUnitCntrReply =
5134 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5135 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5136 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5137 __func__, sasIoUnitCntrReply->IOCStatus,
5138 sasIoUnitCntrReply->IOCLogInfo);
5139 printk(KERN_DEBUG "%s: failed\n", __func__);
5140 ret = -1;
5141 } else
5142 printk(KERN_DEBUG "%s: success\n", __func__);
5143 out:
5144
5145 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5146 mutex_unlock(&ioc->mptbase_cmds.mutex);
5147 return ret;
5148 }
5149
5150 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5151
5152 static void
5153 mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5154 MpiEventDataRaid_t * pRaidEventData)
5155 {
5156 int volume;
5157 int reason;
5158 int disk;
5159 int status;
5160 int flags;
5161 int state;
5162
5163 volume = pRaidEventData->VolumeID;
5164 reason = pRaidEventData->ReasonCode;
5165 disk = pRaidEventData->PhysDiskNum;
5166 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5167 flags = (status >> 0) & 0xff;
5168 state = (status >> 8) & 0xff;
5169
5170 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5171 return;
5172 }
5173
5174 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5175 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5176 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5177 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5178 ioc->name, disk, volume);
5179 } else {
5180 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5181 ioc->name, volume);
5182 }
5183
5184 switch(reason) {
5185 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5186 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5187 ioc->name);
5188 break;
5189
5190 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5191
5192 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5193 ioc->name);
5194 break;
5195
5196 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5197 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5198 ioc->name);
5199 break;
5200
5201 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5202 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5203 ioc->name,
5204 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5205 ? "optimal"
5206 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5207 ? "degraded"
5208 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5209 ? "failed"
5210 : "state unknown",
5211 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5212 ? ", enabled" : "",
5213 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5214 ? ", quiesced" : "",
5215 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5216 ? ", resync in progress" : "" );
5217 break;
5218
5219 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5220 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5221 ioc->name, disk);
5222 break;
5223
5224 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5225 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5226 ioc->name);
5227 break;
5228
5229 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5230 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5231 ioc->name);
5232 break;
5233
5234 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5235 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5236 ioc->name);
5237 break;
5238
5239 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5240 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5241 ioc->name,
5242 state == MPI_PHYSDISK0_STATUS_ONLINE
5243 ? "online"
5244 : state == MPI_PHYSDISK0_STATUS_MISSING
5245 ? "missing"
5246 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5247 ? "not compatible"
5248 : state == MPI_PHYSDISK0_STATUS_FAILED
5249 ? "failed"
5250 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5251 ? "initializing"
5252 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5253 ? "offline requested"
5254 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5255 ? "failed requested"
5256 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5257 ? "offline"
5258 : "state unknown",
5259 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5260 ? ", out of sync" : "",
5261 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5262 ? ", quiesced" : "" );
5263 break;
5264
5265 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5266 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5267 ioc->name, disk);
5268 break;
5269
5270 case MPI_EVENT_RAID_RC_SMART_DATA:
5271 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5272 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5273 break;
5274
5275 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5276 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5277 ioc->name, disk);
5278 break;
5279 }
5280 }
5281
5282 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5283 /**
5284 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5285 * @ioc: Pointer to MPT_ADAPTER structure
5286 *
5287 * Returns: 0 for success
5288 * -ENOMEM if no memory available
5289 * -EPERM if not allowed due to ISR context
5290 * -EAGAIN if no msg frames currently available
5291 * -EFAULT for non-successful reply or no reply (timeout)
5292 */
5293 static int
5294 GetIoUnitPage2(MPT_ADAPTER *ioc)
5295 {
5296 ConfigPageHeader_t hdr;
5297 CONFIGPARMS cfg;
5298 IOUnitPage2_t *ppage_alloc;
5299 dma_addr_t page_dma;
5300 int data_sz;
5301 int rc;
5302
5303 /* Get the page header */
5304 hdr.PageVersion = 0;
5305 hdr.PageLength = 0;
5306 hdr.PageNumber = 2;
5307 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5308 cfg.cfghdr.hdr = &hdr;
5309 cfg.physAddr = -1;
5310 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5311 cfg.dir = 0;
5312 cfg.pageAddr = 0;
5313 cfg.timeout = 0;
5314
5315 if ((rc = mpt_config(ioc, &cfg)) != 0)
5316 return rc;
5317
5318 if (hdr.PageLength == 0)
5319 return 0;
5320
5321 /* Read the config page */
5322 data_sz = hdr.PageLength * 4;
5323 rc = -ENOMEM;
5324 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5325 if (ppage_alloc) {
5326 memset((u8 *)ppage_alloc, 0, data_sz);
5327 cfg.physAddr = page_dma;
5328 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5329
5330 /* If Good, save data */
5331 if ((rc = mpt_config(ioc, &cfg)) == 0)
5332 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5333
5334 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5335 }
5336
5337 return rc;
5338 }
5339
5340 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5341 /**
5342 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5343 * @ioc: Pointer to a Adapter Strucutre
5344 * @portnum: IOC port number
5345 *
5346 * Return: -EFAULT if read of config page header fails
5347 * or if no nvram
5348 * If read of SCSI Port Page 0 fails,
5349 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5350 * Adapter settings: async, narrow
5351 * Return 1
5352 * If read of SCSI Port Page 2 fails,
5353 * Adapter settings valid
5354 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5355 * Return 1
5356 * Else
5357 * Both valid
5358 * Return 0
5359 * CHECK - what type of locking mechanisms should be used????
5360 */
5361 static int
5362 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5363 {
5364 u8 *pbuf;
5365 dma_addr_t buf_dma;
5366 CONFIGPARMS cfg;
5367 ConfigPageHeader_t header;
5368 int ii;
5369 int data, rc = 0;
5370
5371 /* Allocate memory
5372 */
5373 if (!ioc->spi_data.nvram) {
5374 int sz;
5375 u8 *mem;
5376 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5377 mem = kmalloc(sz, GFP_ATOMIC);
5378 if (mem == NULL)
5379 return -EFAULT;
5380
5381 ioc->spi_data.nvram = (int *) mem;
5382
5383 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5384 ioc->name, ioc->spi_data.nvram, sz));
5385 }
5386
5387 /* Invalidate NVRAM information
5388 */
5389 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5390 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5391 }
5392
5393 /* Read SPP0 header, allocate memory, then read page.
5394 */
5395 header.PageVersion = 0;
5396 header.PageLength = 0;
5397 header.PageNumber = 0;
5398 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5399 cfg.cfghdr.hdr = &header;
5400 cfg.physAddr = -1;
5401 cfg.pageAddr = portnum;
5402 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5403 cfg.dir = 0;
5404 cfg.timeout = 0; /* use default */
5405 if (mpt_config(ioc, &cfg) != 0)
5406 return -EFAULT;
5407
5408 if (header.PageLength > 0) {
5409 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5410 if (pbuf) {
5411 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5412 cfg.physAddr = buf_dma;
5413 if (mpt_config(ioc, &cfg) != 0) {
5414 ioc->spi_data.maxBusWidth = MPT_NARROW;
5415 ioc->spi_data.maxSyncOffset = 0;
5416 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5417 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5418 rc = 1;
5419 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5420 "Unable to read PortPage0 minSyncFactor=%x\n",
5421 ioc->name, ioc->spi_data.minSyncFactor));
5422 } else {
5423 /* Save the Port Page 0 data
5424 */
5425 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5426 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5427 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5428
5429 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5430 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5431 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5432 "noQas due to Capabilities=%x\n",
5433 ioc->name, pPP0->Capabilities));
5434 }
5435 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5436 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5437 if (data) {
5438 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5439 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5440 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5441 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5442 "PortPage0 minSyncFactor=%x\n",
5443 ioc->name, ioc->spi_data.minSyncFactor));
5444 } else {
5445 ioc->spi_data.maxSyncOffset = 0;
5446 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5447 }
5448
5449 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5450
5451 /* Update the minSyncFactor based on bus type.
5452 */
5453 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5454 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5455
5456 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5457 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5458 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5459 "HVD or SE detected, minSyncFactor=%x\n",
5460 ioc->name, ioc->spi_data.minSyncFactor));
5461 }
5462 }
5463 }
5464 if (pbuf) {
5465 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5466 }
5467 }
5468 }
5469
5470 /* SCSI Port Page 2 - Read the header then the page.
5471 */
5472 header.PageVersion = 0;
5473 header.PageLength = 0;
5474 header.PageNumber = 2;
5475 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5476 cfg.cfghdr.hdr = &header;
5477 cfg.physAddr = -1;
5478 cfg.pageAddr = portnum;
5479 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5480 cfg.dir = 0;
5481 if (mpt_config(ioc, &cfg) != 0)
5482 return -EFAULT;
5483
5484 if (header.PageLength > 0) {
5485 /* Allocate memory and read SCSI Port Page 2
5486 */
5487 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5488 if (pbuf) {
5489 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5490 cfg.physAddr = buf_dma;
5491 if (mpt_config(ioc, &cfg) != 0) {
5492 /* Nvram data is left with INVALID mark
5493 */
5494 rc = 1;
5495 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5496
5497 /* This is an ATTO adapter, read Page2 accordingly
5498 */
5499 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5500 ATTODeviceInfo_t *pdevice = NULL;
5501 u16 ATTOFlags;
5502
5503 /* Save the Port Page 2 data
5504 * (reformat into a 32bit quantity)
5505 */
5506 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5507 pdevice = &pPP2->DeviceSettings[ii];
5508 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5509 data = 0;
5510
5511 /* Translate ATTO device flags to LSI format
5512 */
5513 if (ATTOFlags & ATTOFLAG_DISC)
5514 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5515 if (ATTOFlags & ATTOFLAG_ID_ENB)
5516 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5517 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5518 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5519 if (ATTOFlags & ATTOFLAG_TAGGED)
5520 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5521 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5522 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5523
5524 data = (data << 16) | (pdevice->Period << 8) | 10;
5525 ioc->spi_data.nvram[ii] = data;
5526 }
5527 } else {
5528 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5529 MpiDeviceInfo_t *pdevice = NULL;
5530
5531 /*
5532 * Save "Set to Avoid SCSI Bus Resets" flag
5533 */
5534 ioc->spi_data.bus_reset =
5535 (le32_to_cpu(pPP2->PortFlags) &
5536 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5537 0 : 1 ;
5538
5539 /* Save the Port Page 2 data
5540 * (reformat into a 32bit quantity)
5541 */
5542 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5543 ioc->spi_data.PortFlags = data;
5544 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5545 pdevice = &pPP2->DeviceSettings[ii];
5546 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5547 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5548 ioc->spi_data.nvram[ii] = data;
5549 }
5550 }
5551
5552 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5553 }
5554 }
5555
5556 /* Update Adapter limits with those from NVRAM
5557 * Comment: Don't need to do this. Target performance
5558 * parameters will never exceed the adapters limits.
5559 */
5560
5561 return rc;
5562 }
5563
5564 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5565 /**
5566 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5567 * @ioc: Pointer to a Adapter Strucutre
5568 * @portnum: IOC port number
5569 *
5570 * Return: -EFAULT if read of config page header fails
5571 * or 0 if success.
5572 */
5573 static int
5574 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5575 {
5576 CONFIGPARMS cfg;
5577 ConfigPageHeader_t header;
5578
5579 /* Read the SCSI Device Page 1 header
5580 */
5581 header.PageVersion = 0;
5582 header.PageLength = 0;
5583 header.PageNumber = 1;
5584 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5585 cfg.cfghdr.hdr = &header;
5586 cfg.physAddr = -1;
5587 cfg.pageAddr = portnum;
5588 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5589 cfg.dir = 0;
5590 cfg.timeout = 0;
5591 if (mpt_config(ioc, &cfg) != 0)
5592 return -EFAULT;
5593
5594 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5595 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5596
5597 header.PageVersion = 0;
5598 header.PageLength = 0;
5599 header.PageNumber = 0;
5600 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5601 if (mpt_config(ioc, &cfg) != 0)
5602 return -EFAULT;
5603
5604 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5605 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5606
5607 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5608 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5609
5610 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5611 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5612 return 0;
5613 }
5614
5615 /**
5616 * mpt_inactive_raid_list_free - This clears this link list.
5617 * @ioc : pointer to per adapter structure
5618 **/
5619 static void
5620 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5621 {
5622 struct inactive_raid_component_info *component_info, *pNext;
5623
5624 if (list_empty(&ioc->raid_data.inactive_list))
5625 return;
5626
5627 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5628 list_for_each_entry_safe(component_info, pNext,
5629 &ioc->raid_data.inactive_list, list) {
5630 list_del(&component_info->list);
5631 kfree(component_info);
5632 }
5633 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5634 }
5635
5636 /**
5637 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5638 *
5639 * @ioc : pointer to per adapter structure
5640 * @channel : volume channel
5641 * @id : volume target id
5642 **/
5643 static void
5644 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5645 {
5646 CONFIGPARMS cfg;
5647 ConfigPageHeader_t hdr;
5648 dma_addr_t dma_handle;
5649 pRaidVolumePage0_t buffer = NULL;
5650 int i;
5651 RaidPhysDiskPage0_t phys_disk;
5652 struct inactive_raid_component_info *component_info;
5653 int handle_inactive_volumes;
5654
5655 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5656 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5657 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5658 cfg.pageAddr = (channel << 8) + id;
5659 cfg.cfghdr.hdr = &hdr;
5660 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5661
5662 if (mpt_config(ioc, &cfg) != 0)
5663 goto out;
5664
5665 if (!hdr.PageLength)
5666 goto out;
5667
5668 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5669 &dma_handle);
5670
5671 if (!buffer)
5672 goto out;
5673
5674 cfg.physAddr = dma_handle;
5675 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5676
5677 if (mpt_config(ioc, &cfg) != 0)
5678 goto out;
5679
5680 if (!buffer->NumPhysDisks)
5681 goto out;
5682
5683 handle_inactive_volumes =
5684 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5685 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5686 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5687 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5688
5689 if (!handle_inactive_volumes)
5690 goto out;
5691
5692 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5693 for (i = 0; i < buffer->NumPhysDisks; i++) {
5694 if(mpt_raid_phys_disk_pg0(ioc,
5695 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5696 continue;
5697
5698 if ((component_info = kmalloc(sizeof (*component_info),
5699 GFP_KERNEL)) == NULL)
5700 continue;
5701
5702 component_info->volumeID = id;
5703 component_info->volumeBus = channel;
5704 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5705 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5706 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5707 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5708
5709 list_add_tail(&component_info->list,
5710 &ioc->raid_data.inactive_list);
5711 }
5712 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5713
5714 out:
5715 if (buffer)
5716 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5717 dma_handle);
5718 }
5719
5720 /**
5721 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5722 * @ioc: Pointer to a Adapter Structure
5723 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5724 * @phys_disk: requested payload data returned
5725 *
5726 * Return:
5727 * 0 on success
5728 * -EFAULT if read of config page header fails or data pointer not NULL
5729 * -ENOMEM if pci_alloc failed
5730 **/
5731 int
5732 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5733 RaidPhysDiskPage0_t *phys_disk)
5734 {
5735 CONFIGPARMS cfg;
5736 ConfigPageHeader_t hdr;
5737 dma_addr_t dma_handle;
5738 pRaidPhysDiskPage0_t buffer = NULL;
5739 int rc;
5740
5741 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5742 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5743 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5744
5745 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5746 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5747 cfg.cfghdr.hdr = &hdr;
5748 cfg.physAddr = -1;
5749 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5750
5751 if (mpt_config(ioc, &cfg) != 0) {
5752 rc = -EFAULT;
5753 goto out;
5754 }
5755
5756 if (!hdr.PageLength) {
5757 rc = -EFAULT;
5758 goto out;
5759 }
5760
5761 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5762 &dma_handle);
5763
5764 if (!buffer) {
5765 rc = -ENOMEM;
5766 goto out;
5767 }
5768
5769 cfg.physAddr = dma_handle;
5770 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5771 cfg.pageAddr = phys_disk_num;
5772
5773 if (mpt_config(ioc, &cfg) != 0) {
5774 rc = -EFAULT;
5775 goto out;
5776 }
5777
5778 rc = 0;
5779 memcpy(phys_disk, buffer, sizeof(*buffer));
5780 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5781
5782 out:
5783
5784 if (buffer)
5785 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5786 dma_handle);
5787
5788 return rc;
5789 }
5790
5791 /**
5792 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5793 * @ioc: Pointer to a Adapter Structure
5794 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5795 *
5796 * Return:
5797 * returns number paths
5798 **/
5799 int
5800 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5801 {
5802 CONFIGPARMS cfg;
5803 ConfigPageHeader_t hdr;
5804 dma_addr_t dma_handle;
5805 pRaidPhysDiskPage1_t buffer = NULL;
5806 int rc;
5807
5808 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5809 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5810
5811 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5812 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5813 hdr.PageNumber = 1;
5814 cfg.cfghdr.hdr = &hdr;
5815 cfg.physAddr = -1;
5816 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5817
5818 if (mpt_config(ioc, &cfg) != 0) {
5819 rc = 0;
5820 goto out;
5821 }
5822
5823 if (!hdr.PageLength) {
5824 rc = 0;
5825 goto out;
5826 }
5827
5828 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5829 &dma_handle);
5830
5831 if (!buffer) {
5832 rc = 0;
5833 goto out;
5834 }
5835
5836 cfg.physAddr = dma_handle;
5837 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5838 cfg.pageAddr = phys_disk_num;
5839
5840 if (mpt_config(ioc, &cfg) != 0) {
5841 rc = 0;
5842 goto out;
5843 }
5844
5845 rc = buffer->NumPhysDiskPaths;
5846 out:
5847
5848 if (buffer)
5849 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5850 dma_handle);
5851
5852 return rc;
5853 }
5854 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5855
5856 /**
5857 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5858 * @ioc: Pointer to a Adapter Structure
5859 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5860 * @phys_disk: requested payload data returned
5861 *
5862 * Return:
5863 * 0 on success
5864 * -EFAULT if read of config page header fails or data pointer not NULL
5865 * -ENOMEM if pci_alloc failed
5866 **/
5867 int
5868 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5869 RaidPhysDiskPage1_t *phys_disk)
5870 {
5871 CONFIGPARMS cfg;
5872 ConfigPageHeader_t hdr;
5873 dma_addr_t dma_handle;
5874 pRaidPhysDiskPage1_t buffer = NULL;
5875 int rc;
5876 int i;
5877 __le64 sas_address;
5878
5879 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5880 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5881 rc = 0;
5882
5883 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5884 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5885 hdr.PageNumber = 1;
5886 cfg.cfghdr.hdr = &hdr;
5887 cfg.physAddr = -1;
5888 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5889
5890 if (mpt_config(ioc, &cfg) != 0) {
5891 rc = -EFAULT;
5892 goto out;
5893 }
5894
5895 if (!hdr.PageLength) {
5896 rc = -EFAULT;
5897 goto out;
5898 }
5899
5900 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5901 &dma_handle);
5902
5903 if (!buffer) {
5904 rc = -ENOMEM;
5905 goto out;
5906 }
5907
5908 cfg.physAddr = dma_handle;
5909 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5910 cfg.pageAddr = phys_disk_num;
5911
5912 if (mpt_config(ioc, &cfg) != 0) {
5913 rc = -EFAULT;
5914 goto out;
5915 }
5916
5917 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5918 phys_disk->PhysDiskNum = phys_disk_num;
5919 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5920 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5921 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5922 phys_disk->Path[i].OwnerIdentifier =
5923 buffer->Path[i].OwnerIdentifier;
5924 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5925 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5926 sas_address = le64_to_cpu(sas_address);
5927 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5928 memcpy(&sas_address,
5929 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5930 sas_address = le64_to_cpu(sas_address);
5931 memcpy(&phys_disk->Path[i].OwnerWWID,
5932 &sas_address, sizeof(__le64));
5933 }
5934
5935 out:
5936
5937 if (buffer)
5938 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5939 dma_handle);
5940
5941 return rc;
5942 }
5943 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5944
5945
5946 /**
5947 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5948 * @ioc: Pointer to a Adapter Strucutre
5949 *
5950 * Return:
5951 * 0 on success
5952 * -EFAULT if read of config page header fails or data pointer not NULL
5953 * -ENOMEM if pci_alloc failed
5954 **/
5955 int
5956 mpt_findImVolumes(MPT_ADAPTER *ioc)
5957 {
5958 IOCPage2_t *pIoc2;
5959 u8 *mem;
5960 dma_addr_t ioc2_dma;
5961 CONFIGPARMS cfg;
5962 ConfigPageHeader_t header;
5963 int rc = 0;
5964 int iocpage2sz;
5965 int i;
5966
5967 if (!ioc->ir_firmware)
5968 return 0;
5969
5970 /* Free the old page
5971 */
5972 kfree(ioc->raid_data.pIocPg2);
5973 ioc->raid_data.pIocPg2 = NULL;
5974 mpt_inactive_raid_list_free(ioc);
5975
5976 /* Read IOCP2 header then the page.
5977 */
5978 header.PageVersion = 0;
5979 header.PageLength = 0;
5980 header.PageNumber = 2;
5981 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5982 cfg.cfghdr.hdr = &header;
5983 cfg.physAddr = -1;
5984 cfg.pageAddr = 0;
5985 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5986 cfg.dir = 0;
5987 cfg.timeout = 0;
5988 if (mpt_config(ioc, &cfg) != 0)
5989 return -EFAULT;
5990
5991 if (header.PageLength == 0)
5992 return -EFAULT;
5993
5994 iocpage2sz = header.PageLength * 4;
5995 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5996 if (!pIoc2)
5997 return -ENOMEM;
5998
5999 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6000 cfg.physAddr = ioc2_dma;
6001 if (mpt_config(ioc, &cfg) != 0)
6002 goto out;
6003
6004 mem = kmalloc(iocpage2sz, GFP_KERNEL);
6005 if (!mem) {
6006 rc = -ENOMEM;
6007 goto out;
6008 }
6009
6010 memcpy(mem, (u8 *)pIoc2, iocpage2sz);
6011 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6012
6013 mpt_read_ioc_pg_3(ioc);
6014
6015 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6016 mpt_inactive_raid_volumes(ioc,
6017 pIoc2->RaidVolume[i].VolumeBus,
6018 pIoc2->RaidVolume[i].VolumeID);
6019
6020 out:
6021 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6022
6023 return rc;
6024 }
6025
6026 static int
6027 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6028 {
6029 IOCPage3_t *pIoc3;
6030 u8 *mem;
6031 CONFIGPARMS cfg;
6032 ConfigPageHeader_t header;
6033 dma_addr_t ioc3_dma;
6034 int iocpage3sz = 0;
6035
6036 /* Free the old page
6037 */
6038 kfree(ioc->raid_data.pIocPg3);
6039 ioc->raid_data.pIocPg3 = NULL;
6040
6041 /* There is at least one physical disk.
6042 * Read and save IOC Page 3
6043 */
6044 header.PageVersion = 0;
6045 header.PageLength = 0;
6046 header.PageNumber = 3;
6047 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6048 cfg.cfghdr.hdr = &header;
6049 cfg.physAddr = -1;
6050 cfg.pageAddr = 0;
6051 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6052 cfg.dir = 0;
6053 cfg.timeout = 0;
6054 if (mpt_config(ioc, &cfg) != 0)
6055 return 0;
6056
6057 if (header.PageLength == 0)
6058 return 0;
6059
6060 /* Read Header good, alloc memory
6061 */
6062 iocpage3sz = header.PageLength * 4;
6063 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6064 if (!pIoc3)
6065 return 0;
6066
6067 /* Read the Page and save the data
6068 * into malloc'd memory.
6069 */
6070 cfg.physAddr = ioc3_dma;
6071 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6072 if (mpt_config(ioc, &cfg) == 0) {
6073 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6074 if (mem) {
6075 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6076 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6077 }
6078 }
6079
6080 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6081
6082 return 0;
6083 }
6084
6085 static void
6086 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6087 {
6088 IOCPage4_t *pIoc4;
6089 CONFIGPARMS cfg;
6090 ConfigPageHeader_t header;
6091 dma_addr_t ioc4_dma;
6092 int iocpage4sz;
6093
6094 /* Read and save IOC Page 4
6095 */
6096 header.PageVersion = 0;
6097 header.PageLength = 0;
6098 header.PageNumber = 4;
6099 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6100 cfg.cfghdr.hdr = &header;
6101 cfg.physAddr = -1;
6102 cfg.pageAddr = 0;
6103 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6104 cfg.dir = 0;
6105 cfg.timeout = 0;
6106 if (mpt_config(ioc, &cfg) != 0)
6107 return;
6108
6109 if (header.PageLength == 0)
6110 return;
6111
6112 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6113 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6114 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6115 if (!pIoc4)
6116 return;
6117 ioc->alloc_total += iocpage4sz;
6118 } else {
6119 ioc4_dma = ioc->spi_data.IocPg4_dma;
6120 iocpage4sz = ioc->spi_data.IocPg4Sz;
6121 }
6122
6123 /* Read the Page into dma memory.
6124 */
6125 cfg.physAddr = ioc4_dma;
6126 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6127 if (mpt_config(ioc, &cfg) == 0) {
6128 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6129 ioc->spi_data.IocPg4_dma = ioc4_dma;
6130 ioc->spi_data.IocPg4Sz = iocpage4sz;
6131 } else {
6132 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6133 ioc->spi_data.pIocPg4 = NULL;
6134 ioc->alloc_total -= iocpage4sz;
6135 }
6136 }
6137
6138 static void
6139 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6140 {
6141 IOCPage1_t *pIoc1;
6142 CONFIGPARMS cfg;
6143 ConfigPageHeader_t header;
6144 dma_addr_t ioc1_dma;
6145 int iocpage1sz = 0;
6146 u32 tmp;
6147
6148 /* Check the Coalescing Timeout in IOC Page 1
6149 */
6150 header.PageVersion = 0;
6151 header.PageLength = 0;
6152 header.PageNumber = 1;
6153 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6154 cfg.cfghdr.hdr = &header;
6155 cfg.physAddr = -1;
6156 cfg.pageAddr = 0;
6157 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6158 cfg.dir = 0;
6159 cfg.timeout = 0;
6160 if (mpt_config(ioc, &cfg) != 0)
6161 return;
6162
6163 if (header.PageLength == 0)
6164 return;
6165
6166 /* Read Header good, alloc memory
6167 */
6168 iocpage1sz = header.PageLength * 4;
6169 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6170 if (!pIoc1)
6171 return;
6172
6173 /* Read the Page and check coalescing timeout
6174 */
6175 cfg.physAddr = ioc1_dma;
6176 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6177 if (mpt_config(ioc, &cfg) == 0) {
6178
6179 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6180 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6181 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6182
6183 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6184 ioc->name, tmp));
6185
6186 if (tmp > MPT_COALESCING_TIMEOUT) {
6187 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6188
6189 /* Write NVRAM and current
6190 */
6191 cfg.dir = 1;
6192 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6193 if (mpt_config(ioc, &cfg) == 0) {
6194 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6195 ioc->name, MPT_COALESCING_TIMEOUT));
6196
6197 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6198 if (mpt_config(ioc, &cfg) == 0) {
6199 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6200 "Reset NVRAM Coalescing Timeout to = %d\n",
6201 ioc->name, MPT_COALESCING_TIMEOUT));
6202 } else {
6203 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6204 "Reset NVRAM Coalescing Timeout Failed\n",
6205 ioc->name));
6206 }
6207
6208 } else {
6209 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6210 "Reset of Current Coalescing Timeout Failed!\n",
6211 ioc->name));
6212 }
6213 }
6214
6215 } else {
6216 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6217 }
6218 }
6219
6220 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6221
6222 return;
6223 }
6224
6225 static void
6226 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6227 {
6228 CONFIGPARMS cfg;
6229 ConfigPageHeader_t hdr;
6230 dma_addr_t buf_dma;
6231 ManufacturingPage0_t *pbuf = NULL;
6232
6233 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6234 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6235
6236 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6237 cfg.cfghdr.hdr = &hdr;
6238 cfg.physAddr = -1;
6239 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6240 cfg.timeout = 10;
6241
6242 if (mpt_config(ioc, &cfg) != 0)
6243 goto out;
6244
6245 if (!cfg.cfghdr.hdr->PageLength)
6246 goto out;
6247
6248 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6249 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6250 if (!pbuf)
6251 goto out;
6252
6253 cfg.physAddr = buf_dma;
6254
6255 if (mpt_config(ioc, &cfg) != 0)
6256 goto out;
6257
6258 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6259 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6260 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6261
6262 out:
6263
6264 if (pbuf)
6265 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6266 }
6267
6268 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6269 /**
6270 * SendEventNotification - Send EventNotification (on or off) request to adapter
6271 * @ioc: Pointer to MPT_ADAPTER structure
6272 * @EvSwitch: Event switch flags
6273 * @sleepFlag: Specifies whether the process can sleep
6274 */
6275 static int
6276 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6277 {
6278 EventNotification_t evn;
6279 MPIDefaultReply_t reply_buf;
6280
6281 memset(&evn, 0, sizeof(EventNotification_t));
6282 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6283
6284 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6285 evn.Switch = EvSwitch;
6286 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6287
6288 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6289 "Sending EventNotification (%d) request %p\n",
6290 ioc->name, EvSwitch, &evn));
6291
6292 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6293 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6294 sleepFlag);
6295 }
6296
6297 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6298 /**
6299 * SendEventAck - Send EventAck request to MPT adapter.
6300 * @ioc: Pointer to MPT_ADAPTER structure
6301 * @evnp: Pointer to original EventNotification request
6302 */
6303 static int
6304 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6305 {
6306 EventAck_t *pAck;
6307
6308 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6309 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6310 ioc->name, __func__));
6311 return -1;
6312 }
6313
6314 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6315
6316 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6317 pAck->ChainOffset = 0;
6318 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6319 pAck->MsgFlags = 0;
6320 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6321 pAck->Event = evnp->Event;
6322 pAck->EventContext = evnp->EventContext;
6323
6324 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6325
6326 return 0;
6327 }
6328
6329 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6330 /**
6331 * mpt_config - Generic function to issue config message
6332 * @ioc: Pointer to an adapter structure
6333 * @pCfg: Pointer to a configuration structure. Struct contains
6334 * action, page address, direction, physical address
6335 * and pointer to a configuration page header
6336 * Page header is updated.
6337 *
6338 * Returns 0 for success
6339 * -EPERM if not allowed due to ISR context
6340 * -EAGAIN if no msg frames currently available
6341 * -EFAULT for non-successful reply or no reply (timeout)
6342 */
6343 int
6344 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6345 {
6346 Config_t *pReq;
6347 ConfigReply_t *pReply;
6348 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6349 MPT_FRAME_HDR *mf;
6350 int ii;
6351 int flagsLength;
6352 long timeout;
6353 int ret;
6354 u8 page_type = 0, extend_page;
6355 unsigned long timeleft;
6356 unsigned long flags;
6357 int in_isr;
6358 u8 issue_hard_reset = 0;
6359 u8 retry_count = 0;
6360
6361 /* Prevent calling wait_event() (below), if caller happens
6362 * to be in ISR context, because that is fatal!
6363 */
6364 in_isr = in_interrupt();
6365 if (in_isr) {
6366 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6367 ioc->name));
6368 return -EPERM;
6369 }
6370
6371 /* don't send a config page during diag reset */
6372 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6373 if (ioc->ioc_reset_in_progress) {
6374 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6375 "%s: busy with host reset\n", ioc->name, __func__));
6376 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6377 return -EBUSY;
6378 }
6379 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6380
6381 /* don't send if no chance of success */
6382 if (!ioc->active ||
6383 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6384 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6385 "%s: ioc not operational, %d, %xh\n",
6386 ioc->name, __func__, ioc->active,
6387 mpt_GetIocState(ioc, 0)));
6388 return -EFAULT;
6389 }
6390
6391 retry_config:
6392 mutex_lock(&ioc->mptbase_cmds.mutex);
6393 /* init the internal cmd struct */
6394 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6395 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6396
6397 /* Get and Populate a free Frame
6398 */
6399 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6400 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6401 "mpt_config: no msg frames!\n", ioc->name));
6402 ret = -EAGAIN;
6403 goto out;
6404 }
6405
6406 pReq = (Config_t *)mf;
6407 pReq->Action = pCfg->action;
6408 pReq->Reserved = 0;
6409 pReq->ChainOffset = 0;
6410 pReq->Function = MPI_FUNCTION_CONFIG;
6411
6412 /* Assume page type is not extended and clear "reserved" fields. */
6413 pReq->ExtPageLength = 0;
6414 pReq->ExtPageType = 0;
6415 pReq->MsgFlags = 0;
6416
6417 for (ii=0; ii < 8; ii++)
6418 pReq->Reserved2[ii] = 0;
6419
6420 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6421 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6422 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6423 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6424
6425 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6426 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6427 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6428 pReq->ExtPageType = pExtHdr->ExtPageType;
6429 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6430
6431 /* Page Length must be treated as a reserved field for the
6432 * extended header.
6433 */
6434 pReq->Header.PageLength = 0;
6435 }
6436
6437 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6438
6439 /* Add a SGE to the config request.
6440 */
6441 if (pCfg->dir)
6442 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6443 else
6444 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6445
6446 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6447 MPI_CONFIG_PAGETYPE_EXTENDED) {
6448 flagsLength |= pExtHdr->ExtPageLength * 4;
6449 page_type = pReq->ExtPageType;
6450 extend_page = 1;
6451 } else {
6452 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6453 page_type = pReq->Header.PageType;
6454 extend_page = 0;
6455 }
6456
6457 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6458 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6459 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6460
6461 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6462 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6463 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6464 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6465 timeout);
6466 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6467 ret = -ETIME;
6468 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6469 "Failed Sending Config request type 0x%x, page 0x%x,"
6470 " action %d, status %xh, time left %ld\n\n",
6471 ioc->name, page_type, pReq->Header.PageNumber,
6472 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6473 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6474 goto out;
6475 if (!timeleft) {
6476 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6477 if (ioc->ioc_reset_in_progress) {
6478 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6479 flags);
6480 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6481 " progress mpt_config timed out.!!\n",
6482 __func__, ioc->name);
6483 mutex_unlock(&ioc->mptbase_cmds.mutex);
6484 return -EFAULT;
6485 }
6486 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6487 issue_hard_reset = 1;
6488 }
6489 goto out;
6490 }
6491
6492 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6493 ret = -1;
6494 goto out;
6495 }
6496 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6497 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6498 if (ret == MPI_IOCSTATUS_SUCCESS) {
6499 if (extend_page) {
6500 pCfg->cfghdr.ehdr->ExtPageLength =
6501 le16_to_cpu(pReply->ExtPageLength);
6502 pCfg->cfghdr.ehdr->ExtPageType =
6503 pReply->ExtPageType;
6504 }
6505 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6506 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6507 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6508 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6509
6510 }
6511
6512 if (retry_count)
6513 printk(MYIOC_s_INFO_FMT "Retry completed "
6514 "ret=0x%x timeleft=%ld\n",
6515 ioc->name, ret, timeleft);
6516
6517 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6518 ret, le32_to_cpu(pReply->IOCLogInfo)));
6519
6520 out:
6521
6522 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6523 mutex_unlock(&ioc->mptbase_cmds.mutex);
6524 if (issue_hard_reset) {
6525 issue_hard_reset = 0;
6526 printk(MYIOC_s_WARN_FMT
6527 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6528 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6529 if (retry_count == 0) {
6530 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6531 retry_count++;
6532 } else
6533 mpt_HardResetHandler(ioc, CAN_SLEEP);
6534
6535 mpt_free_msg_frame(ioc, mf);
6536 /* attempt one retry for a timed out command */
6537 if (retry_count < 2) {
6538 printk(MYIOC_s_INFO_FMT
6539 "Attempting Retry Config request"
6540 " type 0x%x, page 0x%x,"
6541 " action %d\n", ioc->name, page_type,
6542 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6543 retry_count++;
6544 goto retry_config;
6545 }
6546 }
6547 return ret;
6548
6549 }
6550
6551 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6552 /**
6553 * mpt_ioc_reset - Base cleanup for hard reset
6554 * @ioc: Pointer to the adapter structure
6555 * @reset_phase: Indicates pre- or post-reset functionality
6556 *
6557 * Remark: Frees resources with internally generated commands.
6558 */
6559 static int
6560 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6561 {
6562 switch (reset_phase) {
6563 case MPT_IOC_SETUP_RESET:
6564 ioc->taskmgmt_quiesce_io = 1;
6565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6566 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6567 break;
6568 case MPT_IOC_PRE_RESET:
6569 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6570 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6571 break;
6572 case MPT_IOC_POST_RESET:
6573 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6574 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6575 /* wake up mptbase_cmds */
6576 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6577 ioc->mptbase_cmds.status |=
6578 MPT_MGMT_STATUS_DID_IOCRESET;
6579 complete(&ioc->mptbase_cmds.done);
6580 }
6581 /* wake up taskmgmt_cmds */
6582 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6583 ioc->taskmgmt_cmds.status |=
6584 MPT_MGMT_STATUS_DID_IOCRESET;
6585 complete(&ioc->taskmgmt_cmds.done);
6586 }
6587 break;
6588 default:
6589 break;
6590 }
6591
6592 return 1; /* currently means nothing really */
6593 }
6594
6595
6596 #ifdef CONFIG_PROC_FS /* { */
6597 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6598 /*
6599 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6600 */
6601 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6602 /**
6603 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6604 *
6605 * Returns 0 for success, non-zero for failure.
6606 */
6607 static int
6608 procmpt_create(void)
6609 {
6610 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6611 if (mpt_proc_root_dir == NULL)
6612 return -ENOTDIR;
6613
6614 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir,
6615 mpt_summary_proc_show);
6616 proc_create_single("version", S_IRUGO, mpt_proc_root_dir,
6617 mpt_version_proc_show);
6618 return 0;
6619 }
6620
6621 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6622 /**
6623 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6624 *
6625 * Returns 0 for success, non-zero for failure.
6626 */
6627 static void
6628 procmpt_destroy(void)
6629 {
6630 remove_proc_entry("version", mpt_proc_root_dir);
6631 remove_proc_entry("summary", mpt_proc_root_dir);
6632 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6633 }
6634
6635 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6636 /*
6637 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6638 */
6639 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6640
6641 static int mpt_summary_proc_show(struct seq_file *m, void *v)
6642 {
6643 MPT_ADAPTER *ioc = m->private;
6644
6645 if (ioc) {
6646 seq_mpt_print_ioc_summary(ioc, m, 1);
6647 } else {
6648 list_for_each_entry(ioc, &ioc_list, list) {
6649 seq_mpt_print_ioc_summary(ioc, m, 1);
6650 }
6651 }
6652
6653 return 0;
6654 }
6655
6656 static int mpt_version_proc_show(struct seq_file *m, void *v)
6657 {
6658 u8 cb_idx;
6659 int scsi, fc, sas, lan, ctl, targ, dmp;
6660 char *drvname;
6661
6662 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6663 seq_printf(m, " Fusion MPT base driver\n");
6664
6665 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6666 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6667 drvname = NULL;
6668 if (MptCallbacks[cb_idx]) {
6669 switch (MptDriverClass[cb_idx]) {
6670 case MPTSPI_DRIVER:
6671 if (!scsi++) drvname = "SPI host";
6672 break;
6673 case MPTFC_DRIVER:
6674 if (!fc++) drvname = "FC host";
6675 break;
6676 case MPTSAS_DRIVER:
6677 if (!sas++) drvname = "SAS host";
6678 break;
6679 case MPTLAN_DRIVER:
6680 if (!lan++) drvname = "LAN";
6681 break;
6682 case MPTSTM_DRIVER:
6683 if (!targ++) drvname = "SCSI target";
6684 break;
6685 case MPTCTL_DRIVER:
6686 if (!ctl++) drvname = "ioctl";
6687 break;
6688 }
6689
6690 if (drvname)
6691 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6692 }
6693 }
6694
6695 return 0;
6696 }
6697
6698 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6699 {
6700 MPT_ADAPTER *ioc = m->private;
6701 char expVer[32];
6702 int sz;
6703 int p;
6704
6705 mpt_get_fw_exp_ver(expVer, ioc);
6706
6707 seq_printf(m, "%s:", ioc->name);
6708 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6709 seq_printf(m, " (f/w download boot flag set)");
6710 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6711 // seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6712
6713 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6714 ioc->facts.ProductID,
6715 ioc->prod_name);
6716 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6717 if (ioc->facts.FWImageSize)
6718 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6719 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6720 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6721 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6722
6723 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6724 ioc->facts.CurrentHostMfaHighAddr);
6725 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6726 ioc->facts.CurrentSenseBufferHighAddr);
6727
6728 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6729 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6730
6731 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6732 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6733 /*
6734 * Rounding UP to nearest 4-kB boundary here...
6735 */
6736 sz = (ioc->req_sz * ioc->req_depth) + 128;
6737 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6738 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6739 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6740 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6741 4*ioc->facts.RequestFrameSize,
6742 ioc->facts.GlobalCredits);
6743
6744 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6745 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6746 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6747 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6748 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6749 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6750 ioc->facts.CurReplyFrameSize,
6751 ioc->facts.ReplyQueueDepth);
6752
6753 seq_printf(m, " MaxDevices = %d\n",
6754 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6755 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6756
6757 /* per-port info */
6758 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6759 seq_printf(m, " PortNumber = %d (of %d)\n",
6760 p+1,
6761 ioc->facts.NumberOfPorts);
6762 if (ioc->bus_type == FC) {
6763 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6764 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6765 seq_printf(m, " LanAddr = %pMR\n", a);
6766 }
6767 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6768 ioc->fc_port_page0[p].WWNN.High,
6769 ioc->fc_port_page0[p].WWNN.Low,
6770 ioc->fc_port_page0[p].WWPN.High,
6771 ioc->fc_port_page0[p].WWPN.Low);
6772 }
6773 }
6774
6775 return 0;
6776 }
6777 #endif /* CONFIG_PROC_FS } */
6778
6779 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6780 static void
6781 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6782 {
6783 buf[0] ='\0';
6784 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6785 sprintf(buf, " (Exp %02d%02d)",
6786 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6787 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6788
6789 /* insider hack! */
6790 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6791 strcat(buf, " [MDBG]");
6792 }
6793 }
6794
6795 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6796 /**
6797 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6798 * @ioc: Pointer to MPT_ADAPTER structure
6799 * @buffer: Pointer to buffer where IOC summary info should be written
6800 * @size: Pointer to number of bytes we wrote (set by this routine)
6801 * @len: Offset at which to start writing in buffer
6802 * @showlan: Display LAN stuff?
6803 *
6804 * This routine writes (english readable) ASCII text, which represents
6805 * a summary of IOC information, to a buffer.
6806 */
6807 void
6808 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6809 {
6810 char expVer[32];
6811 int y;
6812
6813 mpt_get_fw_exp_ver(expVer, ioc);
6814
6815 /*
6816 * Shorter summary of attached ioc's...
6817 */
6818 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6819 ioc->name,
6820 ioc->prod_name,
6821 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6822 ioc->facts.FWVersion.Word,
6823 expVer,
6824 ioc->facts.NumberOfPorts,
6825 ioc->req_depth);
6826
6827 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6828 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6829 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6830 }
6831
6832 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6833
6834 if (!ioc->active)
6835 y += sprintf(buffer+len+y, " (disabled)");
6836
6837 y += sprintf(buffer+len+y, "\n");
6838
6839 *size = y;
6840 }
6841
6842 #ifdef CONFIG_PROC_FS
6843 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6844 {
6845 char expVer[32];
6846
6847 mpt_get_fw_exp_ver(expVer, ioc);
6848
6849 /*
6850 * Shorter summary of attached ioc's...
6851 */
6852 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6853 ioc->name,
6854 ioc->prod_name,
6855 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6856 ioc->facts.FWVersion.Word,
6857 expVer,
6858 ioc->facts.NumberOfPorts,
6859 ioc->req_depth);
6860
6861 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6862 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6863 seq_printf(m, ", LanAddr=%pMR", a);
6864 }
6865
6866 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6867
6868 if (!ioc->active)
6869 seq_printf(m, " (disabled)");
6870
6871 seq_putc(m, '\n');
6872 }
6873 #endif
6874
6875 /**
6876 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6877 * @ioc: Pointer to MPT_ADAPTER structure
6878 *
6879 * Returns 0 for SUCCESS or -1 if FAILED.
6880 *
6881 * If -1 is return, then it was not possible to set the flags
6882 **/
6883 int
6884 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6885 {
6886 unsigned long flags;
6887 int retval;
6888
6889 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6890 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6891 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6892 retval = -1;
6893 goto out;
6894 }
6895 retval = 0;
6896 ioc->taskmgmt_in_progress = 1;
6897 ioc->taskmgmt_quiesce_io = 1;
6898 if (ioc->alt_ioc) {
6899 ioc->alt_ioc->taskmgmt_in_progress = 1;
6900 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6901 }
6902 out:
6903 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6904 return retval;
6905 }
6906 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6907
6908 /**
6909 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6910 * @ioc: Pointer to MPT_ADAPTER structure
6911 *
6912 **/
6913 void
6914 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6915 {
6916 unsigned long flags;
6917
6918 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6919 ioc->taskmgmt_in_progress = 0;
6920 ioc->taskmgmt_quiesce_io = 0;
6921 if (ioc->alt_ioc) {
6922 ioc->alt_ioc->taskmgmt_in_progress = 0;
6923 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6924 }
6925 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6926 }
6927 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6928
6929
6930 /**
6931 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6932 * the kernel
6933 * @ioc: Pointer to MPT_ADAPTER structure
6934 *
6935 **/
6936 void
6937 mpt_halt_firmware(MPT_ADAPTER *ioc)
6938 {
6939 u32 ioc_raw_state;
6940
6941 ioc_raw_state = mpt_GetIocState(ioc, 0);
6942
6943 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6944 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6945 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6946 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6947 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6948 } else {
6949 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6950 panic("%s: Firmware is halted due to command timeout\n",
6951 ioc->name);
6952 }
6953 }
6954 EXPORT_SYMBOL(mpt_halt_firmware);
6955
6956 /**
6957 * mpt_SoftResetHandler - Issues a less expensive reset
6958 * @ioc: Pointer to MPT_ADAPTER structure
6959 * @sleepFlag: Indicates if sleep or schedule must be called.
6960 *
6961 * Returns 0 for SUCCESS or -1 if FAILED.
6962 *
6963 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6964 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6965 * All posted buffers are freed, and event notification is turned off.
6966 * IOC doesn't reply to any outstanding request. This will transfer IOC
6967 * to READY state.
6968 **/
6969 static int
6970 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
6971 {
6972 int rc;
6973 int ii;
6974 u8 cb_idx;
6975 unsigned long flags;
6976 u32 ioc_state;
6977 unsigned long time_count;
6978
6979 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
6980 ioc->name));
6981
6982 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
6983
6984 if (mpt_fwfault_debug)
6985 mpt_halt_firmware(ioc);
6986
6987 if (ioc_state == MPI_IOC_STATE_FAULT ||
6988 ioc_state == MPI_IOC_STATE_RESET) {
6989 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6990 "skipping, either in FAULT or RESET state!\n", ioc->name));
6991 return -1;
6992 }
6993
6994 if (ioc->bus_type == FC) {
6995 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6996 "skipping, because the bus type is FC!\n", ioc->name));
6997 return -1;
6998 }
6999
7000 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7001 if (ioc->ioc_reset_in_progress) {
7002 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7003 return -1;
7004 }
7005 ioc->ioc_reset_in_progress = 1;
7006 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7007
7008 rc = -1;
7009
7010 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7011 if (MptResetHandlers[cb_idx])
7012 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7013 }
7014
7015 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7016 if (ioc->taskmgmt_in_progress) {
7017 ioc->ioc_reset_in_progress = 0;
7018 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7019 return -1;
7020 }
7021 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7022 /* Disable reply interrupts (also blocks FreeQ) */
7023 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7024 ioc->active = 0;
7025 time_count = jiffies;
7026
7027 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7028
7029 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7030 if (MptResetHandlers[cb_idx])
7031 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7032 }
7033
7034 if (rc)
7035 goto out;
7036
7037 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7038 if (ioc_state != MPI_IOC_STATE_READY)
7039 goto out;
7040
7041 for (ii = 0; ii < 5; ii++) {
7042 /* Get IOC facts! Allow 5 retries */
7043 rc = GetIocFacts(ioc, sleepFlag,
7044 MPT_HOSTEVENT_IOC_RECOVER);
7045 if (rc == 0)
7046 break;
7047 if (sleepFlag == CAN_SLEEP)
7048 msleep(100);
7049 else
7050 mdelay(100);
7051 }
7052 if (ii == 5)
7053 goto out;
7054
7055 rc = PrimeIocFifos(ioc);
7056 if (rc != 0)
7057 goto out;
7058
7059 rc = SendIocInit(ioc, sleepFlag);
7060 if (rc != 0)
7061 goto out;
7062
7063 rc = SendEventNotification(ioc, 1, sleepFlag);
7064 if (rc != 0)
7065 goto out;
7066
7067 if (ioc->hard_resets < -1)
7068 ioc->hard_resets++;
7069
7070 /*
7071 * At this point, we know soft reset succeeded.
7072 */
7073
7074 ioc->active = 1;
7075 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7076
7077 out:
7078 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7079 ioc->ioc_reset_in_progress = 0;
7080 ioc->taskmgmt_quiesce_io = 0;
7081 ioc->taskmgmt_in_progress = 0;
7082 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7083
7084 if (ioc->active) { /* otherwise, hard reset coming */
7085 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7086 if (MptResetHandlers[cb_idx])
7087 mpt_signal_reset(cb_idx, ioc,
7088 MPT_IOC_POST_RESET);
7089 }
7090 }
7091
7092 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7093 "SoftResetHandler: completed (%d seconds): %s\n",
7094 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7095 ((rc == 0) ? "SUCCESS" : "FAILED")));
7096
7097 return rc;
7098 }
7099
7100 /**
7101 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7102 * @ioc: Pointer to MPT_ADAPTER structure
7103 * @sleepFlag: Indicates if sleep or schedule must be called.
7104 *
7105 * Returns 0 for SUCCESS or -1 if FAILED.
7106 * Try for softreset first, only if it fails go for expensive
7107 * HardReset.
7108 **/
7109 int
7110 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7111 int ret = -1;
7112
7113 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7114 if (ret == 0)
7115 return ret;
7116 ret = mpt_HardResetHandler(ioc, sleepFlag);
7117 return ret;
7118 }
7119 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7120
7121 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7122 /*
7123 * Reset Handling
7124 */
7125 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7126 /**
7127 * mpt_HardResetHandler - Generic reset handler
7128 * @ioc: Pointer to MPT_ADAPTER structure
7129 * @sleepFlag: Indicates if sleep or schedule must be called.
7130 *
7131 * Issues SCSI Task Management call based on input arg values.
7132 * If TaskMgmt fails, returns associated SCSI request.
7133 *
7134 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7135 * or a non-interrupt thread. In the former, must not call schedule().
7136 *
7137 * Note: A return of -1 is a FATAL error case, as it means a
7138 * FW reload/initialization failed.
7139 *
7140 * Returns 0 for SUCCESS or -1 if FAILED.
7141 */
7142 int
7143 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7144 {
7145 int rc;
7146 u8 cb_idx;
7147 unsigned long flags;
7148 unsigned long time_count;
7149
7150 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7151 #ifdef MFCNT
7152 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7153 printk("MF count 0x%x !\n", ioc->mfcnt);
7154 #endif
7155 if (mpt_fwfault_debug)
7156 mpt_halt_firmware(ioc);
7157
7158 /* Reset the adapter. Prevent more than 1 call to
7159 * mpt_do_ioc_recovery at any instant in time.
7160 */
7161 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7162 if (ioc->ioc_reset_in_progress) {
7163 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7164 ioc->wait_on_reset_completion = 1;
7165 do {
7166 ssleep(1);
7167 } while (ioc->ioc_reset_in_progress == 1);
7168 ioc->wait_on_reset_completion = 0;
7169 return ioc->reset_status;
7170 }
7171 if (ioc->wait_on_reset_completion) {
7172 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7173 rc = 0;
7174 time_count = jiffies;
7175 goto exit;
7176 }
7177 ioc->ioc_reset_in_progress = 1;
7178 if (ioc->alt_ioc)
7179 ioc->alt_ioc->ioc_reset_in_progress = 1;
7180 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7181
7182
7183 /* The SCSI driver needs to adjust timeouts on all current
7184 * commands prior to the diagnostic reset being issued.
7185 * Prevents timeouts occurring during a diagnostic reset...very bad.
7186 * For all other protocol drivers, this is a no-op.
7187 */
7188 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7189 if (MptResetHandlers[cb_idx]) {
7190 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7191 if (ioc->alt_ioc)
7192 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7193 MPT_IOC_SETUP_RESET);
7194 }
7195 }
7196
7197 time_count = jiffies;
7198 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7199 if (rc != 0) {
7200 printk(KERN_WARNING MYNAM
7201 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7202 rc, ioc->name, mpt_GetIocState(ioc, 0));
7203 } else {
7204 if (ioc->hard_resets < -1)
7205 ioc->hard_resets++;
7206 }
7207
7208 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7209 ioc->ioc_reset_in_progress = 0;
7210 ioc->taskmgmt_quiesce_io = 0;
7211 ioc->taskmgmt_in_progress = 0;
7212 ioc->reset_status = rc;
7213 if (ioc->alt_ioc) {
7214 ioc->alt_ioc->ioc_reset_in_progress = 0;
7215 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7216 ioc->alt_ioc->taskmgmt_in_progress = 0;
7217 }
7218 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7219
7220 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7221 if (MptResetHandlers[cb_idx]) {
7222 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7223 if (ioc->alt_ioc)
7224 mpt_signal_reset(cb_idx,
7225 ioc->alt_ioc, MPT_IOC_POST_RESET);
7226 }
7227 }
7228 exit:
7229 dtmprintk(ioc,
7230 printk(MYIOC_s_DEBUG_FMT
7231 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7232 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7233 "SUCCESS" : "FAILED")));
7234
7235 return rc;
7236 }
7237
7238 #ifdef CONFIG_FUSION_LOGGING
7239 static void
7240 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7241 {
7242 char *ds = NULL;
7243 u32 evData0;
7244 int ii;
7245 u8 event;
7246 char *evStr = ioc->evStr;
7247
7248 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7249 evData0 = le32_to_cpu(pEventReply->Data[0]);
7250
7251 switch(event) {
7252 case MPI_EVENT_NONE:
7253 ds = "None";
7254 break;
7255 case MPI_EVENT_LOG_DATA:
7256 ds = "Log Data";
7257 break;
7258 case MPI_EVENT_STATE_CHANGE:
7259 ds = "State Change";
7260 break;
7261 case MPI_EVENT_UNIT_ATTENTION:
7262 ds = "Unit Attention";
7263 break;
7264 case MPI_EVENT_IOC_BUS_RESET:
7265 ds = "IOC Bus Reset";
7266 break;
7267 case MPI_EVENT_EXT_BUS_RESET:
7268 ds = "External Bus Reset";
7269 break;
7270 case MPI_EVENT_RESCAN:
7271 ds = "Bus Rescan Event";
7272 break;
7273 case MPI_EVENT_LINK_STATUS_CHANGE:
7274 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7275 ds = "Link Status(FAILURE) Change";
7276 else
7277 ds = "Link Status(ACTIVE) Change";
7278 break;
7279 case MPI_EVENT_LOOP_STATE_CHANGE:
7280 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7281 ds = "Loop State(LIP) Change";
7282 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7283 ds = "Loop State(LPE) Change";
7284 else
7285 ds = "Loop State(LPB) Change";
7286 break;
7287 case MPI_EVENT_LOGOUT:
7288 ds = "Logout";
7289 break;
7290 case MPI_EVENT_EVENT_CHANGE:
7291 if (evData0)
7292 ds = "Events ON";
7293 else
7294 ds = "Events OFF";
7295 break;
7296 case MPI_EVENT_INTEGRATED_RAID:
7297 {
7298 u8 ReasonCode = (u8)(evData0 >> 16);
7299 switch (ReasonCode) {
7300 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7301 ds = "Integrated Raid: Volume Created";
7302 break;
7303 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7304 ds = "Integrated Raid: Volume Deleted";
7305 break;
7306 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7307 ds = "Integrated Raid: Volume Settings Changed";
7308 break;
7309 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7310 ds = "Integrated Raid: Volume Status Changed";
7311 break;
7312 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7313 ds = "Integrated Raid: Volume Physdisk Changed";
7314 break;
7315 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7316 ds = "Integrated Raid: Physdisk Created";
7317 break;
7318 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7319 ds = "Integrated Raid: Physdisk Deleted";
7320 break;
7321 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7322 ds = "Integrated Raid: Physdisk Settings Changed";
7323 break;
7324 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7325 ds = "Integrated Raid: Physdisk Status Changed";
7326 break;
7327 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7328 ds = "Integrated Raid: Domain Validation Needed";
7329 break;
7330 case MPI_EVENT_RAID_RC_SMART_DATA :
7331 ds = "Integrated Raid; Smart Data";
7332 break;
7333 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7334 ds = "Integrated Raid: Replace Action Started";
7335 break;
7336 default:
7337 ds = "Integrated Raid";
7338 break;
7339 }
7340 break;
7341 }
7342 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7343 ds = "SCSI Device Status Change";
7344 break;
7345 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7346 {
7347 u8 id = (u8)(evData0);
7348 u8 channel = (u8)(evData0 >> 8);
7349 u8 ReasonCode = (u8)(evData0 >> 16);
7350 switch (ReasonCode) {
7351 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7352 snprintf(evStr, EVENT_DESCR_STR_SZ,
7353 "SAS Device Status Change: Added: "
7354 "id=%d channel=%d", id, channel);
7355 break;
7356 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7357 snprintf(evStr, EVENT_DESCR_STR_SZ,
7358 "SAS Device Status Change: Deleted: "
7359 "id=%d channel=%d", id, channel);
7360 break;
7361 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7362 snprintf(evStr, EVENT_DESCR_STR_SZ,
7363 "SAS Device Status Change: SMART Data: "
7364 "id=%d channel=%d", id, channel);
7365 break;
7366 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7367 snprintf(evStr, EVENT_DESCR_STR_SZ,
7368 "SAS Device Status Change: No Persistency: "
7369 "id=%d channel=%d", id, channel);
7370 break;
7371 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7372 snprintf(evStr, EVENT_DESCR_STR_SZ,
7373 "SAS Device Status Change: Unsupported Device "
7374 "Discovered : id=%d channel=%d", id, channel);
7375 break;
7376 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7377 snprintf(evStr, EVENT_DESCR_STR_SZ,
7378 "SAS Device Status Change: Internal Device "
7379 "Reset : id=%d channel=%d", id, channel);
7380 break;
7381 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7382 snprintf(evStr, EVENT_DESCR_STR_SZ,
7383 "SAS Device Status Change: Internal Task "
7384 "Abort : id=%d channel=%d", id, channel);
7385 break;
7386 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7387 snprintf(evStr, EVENT_DESCR_STR_SZ,
7388 "SAS Device Status Change: Internal Abort "
7389 "Task Set : id=%d channel=%d", id, channel);
7390 break;
7391 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7392 snprintf(evStr, EVENT_DESCR_STR_SZ,
7393 "SAS Device Status Change: Internal Clear "
7394 "Task Set : id=%d channel=%d", id, channel);
7395 break;
7396 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7397 snprintf(evStr, EVENT_DESCR_STR_SZ,
7398 "SAS Device Status Change: Internal Query "
7399 "Task : id=%d channel=%d", id, channel);
7400 break;
7401 default:
7402 snprintf(evStr, EVENT_DESCR_STR_SZ,
7403 "SAS Device Status Change: Unknown: "
7404 "id=%d channel=%d", id, channel);
7405 break;
7406 }
7407 break;
7408 }
7409 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7410 ds = "Bus Timer Expired";
7411 break;
7412 case MPI_EVENT_QUEUE_FULL:
7413 {
7414 u16 curr_depth = (u16)(evData0 >> 16);
7415 u8 channel = (u8)(evData0 >> 8);
7416 u8 id = (u8)(evData0);
7417
7418 snprintf(evStr, EVENT_DESCR_STR_SZ,
7419 "Queue Full: channel=%d id=%d depth=%d",
7420 channel, id, curr_depth);
7421 break;
7422 }
7423 case MPI_EVENT_SAS_SES:
7424 ds = "SAS SES Event";
7425 break;
7426 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7427 ds = "Persistent Table Full";
7428 break;
7429 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7430 {
7431 u8 LinkRates = (u8)(evData0 >> 8);
7432 u8 PhyNumber = (u8)(evData0);
7433 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7434 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7435 switch (LinkRates) {
7436 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7437 snprintf(evStr, EVENT_DESCR_STR_SZ,
7438 "SAS PHY Link Status: Phy=%d:"
7439 " Rate Unknown",PhyNumber);
7440 break;
7441 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7442 snprintf(evStr, EVENT_DESCR_STR_SZ,
7443 "SAS PHY Link Status: Phy=%d:"
7444 " Phy Disabled",PhyNumber);
7445 break;
7446 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7447 snprintf(evStr, EVENT_DESCR_STR_SZ,
7448 "SAS PHY Link Status: Phy=%d:"
7449 " Failed Speed Nego",PhyNumber);
7450 break;
7451 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7452 snprintf(evStr, EVENT_DESCR_STR_SZ,
7453 "SAS PHY Link Status: Phy=%d:"
7454 " Sata OOB Completed",PhyNumber);
7455 break;
7456 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7457 snprintf(evStr, EVENT_DESCR_STR_SZ,
7458 "SAS PHY Link Status: Phy=%d:"
7459 " Rate 1.5 Gbps",PhyNumber);
7460 break;
7461 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7462 snprintf(evStr, EVENT_DESCR_STR_SZ,
7463 "SAS PHY Link Status: Phy=%d:"
7464 " Rate 3.0 Gbps", PhyNumber);
7465 break;
7466 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7467 snprintf(evStr, EVENT_DESCR_STR_SZ,
7468 "SAS PHY Link Status: Phy=%d:"
7469 " Rate 6.0 Gbps", PhyNumber);
7470 break;
7471 default:
7472 snprintf(evStr, EVENT_DESCR_STR_SZ,
7473 "SAS PHY Link Status: Phy=%d", PhyNumber);
7474 break;
7475 }
7476 break;
7477 }
7478 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7479 ds = "SAS Discovery Error";
7480 break;
7481 case MPI_EVENT_IR_RESYNC_UPDATE:
7482 {
7483 u8 resync_complete = (u8)(evData0 >> 16);
7484 snprintf(evStr, EVENT_DESCR_STR_SZ,
7485 "IR Resync Update: Complete = %d:",resync_complete);
7486 break;
7487 }
7488 case MPI_EVENT_IR2:
7489 {
7490 u8 id = (u8)(evData0);
7491 u8 channel = (u8)(evData0 >> 8);
7492 u8 phys_num = (u8)(evData0 >> 24);
7493 u8 ReasonCode = (u8)(evData0 >> 16);
7494
7495 switch (ReasonCode) {
7496 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7497 snprintf(evStr, EVENT_DESCR_STR_SZ,
7498 "IR2: LD State Changed: "
7499 "id=%d channel=%d phys_num=%d",
7500 id, channel, phys_num);
7501 break;
7502 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7503 snprintf(evStr, EVENT_DESCR_STR_SZ,
7504 "IR2: PD State Changed "
7505 "id=%d channel=%d phys_num=%d",
7506 id, channel, phys_num);
7507 break;
7508 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7509 snprintf(evStr, EVENT_DESCR_STR_SZ,
7510 "IR2: Bad Block Table Full: "
7511 "id=%d channel=%d phys_num=%d",
7512 id, channel, phys_num);
7513 break;
7514 case MPI_EVENT_IR2_RC_PD_INSERTED:
7515 snprintf(evStr, EVENT_DESCR_STR_SZ,
7516 "IR2: PD Inserted: "
7517 "id=%d channel=%d phys_num=%d",
7518 id, channel, phys_num);
7519 break;
7520 case MPI_EVENT_IR2_RC_PD_REMOVED:
7521 snprintf(evStr, EVENT_DESCR_STR_SZ,
7522 "IR2: PD Removed: "
7523 "id=%d channel=%d phys_num=%d",
7524 id, channel, phys_num);
7525 break;
7526 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7527 snprintf(evStr, EVENT_DESCR_STR_SZ,
7528 "IR2: Foreign CFG Detected: "
7529 "id=%d channel=%d phys_num=%d",
7530 id, channel, phys_num);
7531 break;
7532 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7533 snprintf(evStr, EVENT_DESCR_STR_SZ,
7534 "IR2: Rebuild Medium Error: "
7535 "id=%d channel=%d phys_num=%d",
7536 id, channel, phys_num);
7537 break;
7538 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7539 snprintf(evStr, EVENT_DESCR_STR_SZ,
7540 "IR2: Dual Port Added: "
7541 "id=%d channel=%d phys_num=%d",
7542 id, channel, phys_num);
7543 break;
7544 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7545 snprintf(evStr, EVENT_DESCR_STR_SZ,
7546 "IR2: Dual Port Removed: "
7547 "id=%d channel=%d phys_num=%d",
7548 id, channel, phys_num);
7549 break;
7550 default:
7551 ds = "IR2";
7552 break;
7553 }
7554 break;
7555 }
7556 case MPI_EVENT_SAS_DISCOVERY:
7557 {
7558 if (evData0)
7559 ds = "SAS Discovery: Start";
7560 else
7561 ds = "SAS Discovery: Stop";
7562 break;
7563 }
7564 case MPI_EVENT_LOG_ENTRY_ADDED:
7565 ds = "SAS Log Entry Added";
7566 break;
7567
7568 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7569 {
7570 u8 phy_num = (u8)(evData0);
7571 u8 port_num = (u8)(evData0 >> 8);
7572 u8 port_width = (u8)(evData0 >> 16);
7573 u8 primitive = (u8)(evData0 >> 24);
7574 snprintf(evStr, EVENT_DESCR_STR_SZ,
7575 "SAS Broadcast Primitive: phy=%d port=%d "
7576 "width=%d primitive=0x%02x",
7577 phy_num, port_num, port_width, primitive);
7578 break;
7579 }
7580
7581 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7582 {
7583 u8 reason = (u8)(evData0);
7584
7585 switch (reason) {
7586 case MPI_EVENT_SAS_INIT_RC_ADDED:
7587 ds = "SAS Initiator Status Change: Added";
7588 break;
7589 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7590 ds = "SAS Initiator Status Change: Deleted";
7591 break;
7592 default:
7593 ds = "SAS Initiator Status Change";
7594 break;
7595 }
7596 break;
7597 }
7598
7599 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7600 {
7601 u8 max_init = (u8)(evData0);
7602 u8 current_init = (u8)(evData0 >> 8);
7603
7604 snprintf(evStr, EVENT_DESCR_STR_SZ,
7605 "SAS Initiator Device Table Overflow: max initiators=%02d "
7606 "current initiators=%02d",
7607 max_init, current_init);
7608 break;
7609 }
7610 case MPI_EVENT_SAS_SMP_ERROR:
7611 {
7612 u8 status = (u8)(evData0);
7613 u8 port_num = (u8)(evData0 >> 8);
7614 u8 result = (u8)(evData0 >> 16);
7615
7616 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7617 snprintf(evStr, EVENT_DESCR_STR_SZ,
7618 "SAS SMP Error: port=%d result=0x%02x",
7619 port_num, result);
7620 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7621 snprintf(evStr, EVENT_DESCR_STR_SZ,
7622 "SAS SMP Error: port=%d : CRC Error",
7623 port_num);
7624 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7625 snprintf(evStr, EVENT_DESCR_STR_SZ,
7626 "SAS SMP Error: port=%d : Timeout",
7627 port_num);
7628 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7629 snprintf(evStr, EVENT_DESCR_STR_SZ,
7630 "SAS SMP Error: port=%d : No Destination",
7631 port_num);
7632 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7633 snprintf(evStr, EVENT_DESCR_STR_SZ,
7634 "SAS SMP Error: port=%d : Bad Destination",
7635 port_num);
7636 else
7637 snprintf(evStr, EVENT_DESCR_STR_SZ,
7638 "SAS SMP Error: port=%d : status=0x%02x",
7639 port_num, status);
7640 break;
7641 }
7642
7643 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7644 {
7645 u8 reason = (u8)(evData0);
7646
7647 switch (reason) {
7648 case MPI_EVENT_SAS_EXP_RC_ADDED:
7649 ds = "Expander Status Change: Added";
7650 break;
7651 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7652 ds = "Expander Status Change: Deleted";
7653 break;
7654 default:
7655 ds = "Expander Status Change";
7656 break;
7657 }
7658 break;
7659 }
7660
7661 /*
7662 * MPT base "custom" events may be added here...
7663 */
7664 default:
7665 ds = "Unknown";
7666 break;
7667 }
7668 if (ds)
7669 strlcpy(evStr, ds, EVENT_DESCR_STR_SZ);
7670
7671
7672 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7673 "MPT event:(%02Xh) : %s\n",
7674 ioc->name, event, evStr));
7675
7676 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7677 ": Event data:\n"));
7678 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7679 devtverboseprintk(ioc, printk(" %08x",
7680 le32_to_cpu(pEventReply->Data[ii])));
7681 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7682 }
7683 #endif
7684 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7685 /**
7686 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7687 * @ioc: Pointer to MPT_ADAPTER structure
7688 * @pEventReply: Pointer to EventNotification reply frame
7689 * @evHandlers: Pointer to integer, number of event handlers
7690 *
7691 * Routes a received EventNotificationReply to all currently registered
7692 * event handlers.
7693 * Returns sum of event handlers return values.
7694 */
7695 static int
7696 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7697 {
7698 u16 evDataLen;
7699 u32 evData0 = 0;
7700 int ii;
7701 u8 cb_idx;
7702 int r = 0;
7703 int handlers = 0;
7704 u8 event;
7705
7706 /*
7707 * Do platform normalization of values
7708 */
7709 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7710 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7711 if (evDataLen) {
7712 evData0 = le32_to_cpu(pEventReply->Data[0]);
7713 }
7714
7715 #ifdef CONFIG_FUSION_LOGGING
7716 if (evDataLen)
7717 mpt_display_event_info(ioc, pEventReply);
7718 #endif
7719
7720 /*
7721 * Do general / base driver event processing
7722 */
7723 switch(event) {
7724 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7725 if (evDataLen) {
7726 u8 evState = evData0 & 0xFF;
7727
7728 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7729
7730 /* Update EventState field in cached IocFacts */
7731 if (ioc->facts.Function) {
7732 ioc->facts.EventState = evState;
7733 }
7734 }
7735 break;
7736 case MPI_EVENT_INTEGRATED_RAID:
7737 mptbase_raid_process_event_data(ioc,
7738 (MpiEventDataRaid_t *)pEventReply->Data);
7739 break;
7740 default:
7741 break;
7742 }
7743
7744 /*
7745 * Should this event be logged? Events are written sequentially.
7746 * When buffer is full, start again at the top.
7747 */
7748 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7749 int idx;
7750
7751 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7752
7753 ioc->events[idx].event = event;
7754 ioc->events[idx].eventContext = ioc->eventContext;
7755
7756 for (ii = 0; ii < 2; ii++) {
7757 if (ii < evDataLen)
7758 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7759 else
7760 ioc->events[idx].data[ii] = 0;
7761 }
7762
7763 ioc->eventContext++;
7764 }
7765
7766
7767 /*
7768 * Call each currently registered protocol event handler.
7769 */
7770 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7771 if (MptEvHandlers[cb_idx]) {
7772 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7773 "Routing Event to event handler #%d\n",
7774 ioc->name, cb_idx));
7775 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7776 handlers++;
7777 }
7778 }
7779 /* FIXME? Examine results here? */
7780
7781 /*
7782 * If needed, send (a single) EventAck.
7783 */
7784 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7785 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7786 "EventAck required\n",ioc->name));
7787 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7788 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7789 ioc->name, ii));
7790 }
7791 }
7792
7793 *evHandlers = handlers;
7794 return r;
7795 }
7796
7797 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7798 /**
7799 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7800 * @ioc: Pointer to MPT_ADAPTER structure
7801 * @log_info: U32 LogInfo reply word from the IOC
7802 *
7803 * Refer to lsi/mpi_log_fc.h.
7804 */
7805 static void
7806 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7807 {
7808 char *desc = "unknown";
7809
7810 switch (log_info & 0xFF000000) {
7811 case MPI_IOCLOGINFO_FC_INIT_BASE:
7812 desc = "FCP Initiator";
7813 break;
7814 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7815 desc = "FCP Target";
7816 break;
7817 case MPI_IOCLOGINFO_FC_LAN_BASE:
7818 desc = "LAN";
7819 break;
7820 case MPI_IOCLOGINFO_FC_MSG_BASE:
7821 desc = "MPI Message Layer";
7822 break;
7823 case MPI_IOCLOGINFO_FC_LINK_BASE:
7824 desc = "FC Link";
7825 break;
7826 case MPI_IOCLOGINFO_FC_CTX_BASE:
7827 desc = "Context Manager";
7828 break;
7829 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7830 desc = "Invalid Field Offset";
7831 break;
7832 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7833 desc = "State Change Info";
7834 break;
7835 }
7836
7837 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7838 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7839 }
7840
7841 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7842 /**
7843 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7844 * @ioc: Pointer to MPT_ADAPTER structure
7845 * @log_info: U32 LogInfo word from the IOC
7846 *
7847 * Refer to lsi/sp_log.h.
7848 */
7849 static void
7850 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7851 {
7852 u32 info = log_info & 0x00FF0000;
7853 char *desc = "unknown";
7854
7855 switch (info) {
7856 case 0x00010000:
7857 desc = "bug! MID not found";
7858 break;
7859
7860 case 0x00020000:
7861 desc = "Parity Error";
7862 break;
7863
7864 case 0x00030000:
7865 desc = "ASYNC Outbound Overrun";
7866 break;
7867
7868 case 0x00040000:
7869 desc = "SYNC Offset Error";
7870 break;
7871
7872 case 0x00050000:
7873 desc = "BM Change";
7874 break;
7875
7876 case 0x00060000:
7877 desc = "Msg In Overflow";
7878 break;
7879
7880 case 0x00070000:
7881 desc = "DMA Error";
7882 break;
7883
7884 case 0x00080000:
7885 desc = "Outbound DMA Overrun";
7886 break;
7887
7888 case 0x00090000:
7889 desc = "Task Management";
7890 break;
7891
7892 case 0x000A0000:
7893 desc = "Device Problem";
7894 break;
7895
7896 case 0x000B0000:
7897 desc = "Invalid Phase Change";
7898 break;
7899
7900 case 0x000C0000:
7901 desc = "Untagged Table Size";
7902 break;
7903
7904 }
7905
7906 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7907 }
7908
7909 /* strings for sas loginfo */
7910 static char *originator_str[] = {
7911 "IOP", /* 00h */
7912 "PL", /* 01h */
7913 "IR" /* 02h */
7914 };
7915 static char *iop_code_str[] = {
7916 NULL, /* 00h */
7917 "Invalid SAS Address", /* 01h */
7918 NULL, /* 02h */
7919 "Invalid Page", /* 03h */
7920 "Diag Message Error", /* 04h */
7921 "Task Terminated", /* 05h */
7922 "Enclosure Management", /* 06h */
7923 "Target Mode" /* 07h */
7924 };
7925 static char *pl_code_str[] = {
7926 NULL, /* 00h */
7927 "Open Failure", /* 01h */
7928 "Invalid Scatter Gather List", /* 02h */
7929 "Wrong Relative Offset or Frame Length", /* 03h */
7930 "Frame Transfer Error", /* 04h */
7931 "Transmit Frame Connected Low", /* 05h */
7932 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7933 "SATA Read Log Receive Data Error", /* 07h */
7934 "SATA NCQ Fail All Commands After Error", /* 08h */
7935 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7936 "Receive Frame Invalid Message", /* 0Ah */
7937 "Receive Context Message Valid Error", /* 0Bh */
7938 "Receive Frame Current Frame Error", /* 0Ch */
7939 "SATA Link Down", /* 0Dh */
7940 "Discovery SATA Init W IOS", /* 0Eh */
7941 "Config Invalid Page", /* 0Fh */
7942 "Discovery SATA Init Timeout", /* 10h */
7943 "Reset", /* 11h */
7944 "Abort", /* 12h */
7945 "IO Not Yet Executed", /* 13h */
7946 "IO Executed", /* 14h */
7947 "Persistent Reservation Out Not Affiliation "
7948 "Owner", /* 15h */
7949 "Open Transmit DMA Abort", /* 16h */
7950 "IO Device Missing Delay Retry", /* 17h */
7951 "IO Cancelled Due to Receive Error", /* 18h */
7952 NULL, /* 19h */
7953 NULL, /* 1Ah */
7954 NULL, /* 1Bh */
7955 NULL, /* 1Ch */
7956 NULL, /* 1Dh */
7957 NULL, /* 1Eh */
7958 NULL, /* 1Fh */
7959 "Enclosure Management" /* 20h */
7960 };
7961 static char *ir_code_str[] = {
7962 "Raid Action Error", /* 00h */
7963 NULL, /* 00h */
7964 NULL, /* 01h */
7965 NULL, /* 02h */
7966 NULL, /* 03h */
7967 NULL, /* 04h */
7968 NULL, /* 05h */
7969 NULL, /* 06h */
7970 NULL /* 07h */
7971 };
7972 static char *raid_sub_code_str[] = {
7973 NULL, /* 00h */
7974 "Volume Creation Failed: Data Passed too "
7975 "Large", /* 01h */
7976 "Volume Creation Failed: Duplicate Volumes "
7977 "Attempted", /* 02h */
7978 "Volume Creation Failed: Max Number "
7979 "Supported Volumes Exceeded", /* 03h */
7980 "Volume Creation Failed: DMA Error", /* 04h */
7981 "Volume Creation Failed: Invalid Volume Type", /* 05h */
7982 "Volume Creation Failed: Error Reading "
7983 "MFG Page 4", /* 06h */
7984 "Volume Creation Failed: Creating Internal "
7985 "Structures", /* 07h */
7986 NULL, /* 08h */
7987 NULL, /* 09h */
7988 NULL, /* 0Ah */
7989 NULL, /* 0Bh */
7990 NULL, /* 0Ch */
7991 NULL, /* 0Dh */
7992 NULL, /* 0Eh */
7993 NULL, /* 0Fh */
7994 "Activation failed: Already Active Volume", /* 10h */
7995 "Activation failed: Unsupported Volume Type", /* 11h */
7996 "Activation failed: Too Many Active Volumes", /* 12h */
7997 "Activation failed: Volume ID in Use", /* 13h */
7998 "Activation failed: Reported Failure", /* 14h */
7999 "Activation failed: Importing a Volume", /* 15h */
8000 NULL, /* 16h */
8001 NULL, /* 17h */
8002 NULL, /* 18h */
8003 NULL, /* 19h */
8004 NULL, /* 1Ah */
8005 NULL, /* 1Bh */
8006 NULL, /* 1Ch */
8007 NULL, /* 1Dh */
8008 NULL, /* 1Eh */
8009 NULL, /* 1Fh */
8010 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8011 "Phys Disk failed: Data Passed too Large", /* 21h */
8012 "Phys Disk failed: DMA Error", /* 22h */
8013 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8014 "Phys Disk failed: Creating Phys Disk Config "
8015 "Page", /* 24h */
8016 NULL, /* 25h */
8017 NULL, /* 26h */
8018 NULL, /* 27h */
8019 NULL, /* 28h */
8020 NULL, /* 29h */
8021 NULL, /* 2Ah */
8022 NULL, /* 2Bh */
8023 NULL, /* 2Ch */
8024 NULL, /* 2Dh */
8025 NULL, /* 2Eh */
8026 NULL, /* 2Fh */
8027 "Compatibility Error: IR Disabled", /* 30h */
8028 "Compatibility Error: Inquiry Command Failed", /* 31h */
8029 "Compatibility Error: Device not Direct Access "
8030 "Device ", /* 32h */
8031 "Compatibility Error: Removable Device Found", /* 33h */
8032 "Compatibility Error: Device SCSI Version not "
8033 "2 or Higher", /* 34h */
8034 "Compatibility Error: SATA Device, 48 BIT LBA "
8035 "not Supported", /* 35h */
8036 "Compatibility Error: Device doesn't have "
8037 "512 Byte Block Sizes", /* 36h */
8038 "Compatibility Error: Volume Type Check Failed", /* 37h */
8039 "Compatibility Error: Volume Type is "
8040 "Unsupported by FW", /* 38h */
8041 "Compatibility Error: Disk Drive too Small for "
8042 "use in Volume", /* 39h */
8043 "Compatibility Error: Phys Disk for Create "
8044 "Volume not Found", /* 3Ah */
8045 "Compatibility Error: Too Many or too Few "
8046 "Disks for Volume Type", /* 3Bh */
8047 "Compatibility Error: Disk stripe Sizes "
8048 "Must be 64KB", /* 3Ch */
8049 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8050 };
8051
8052 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8053 /**
8054 * mpt_sas_log_info - Log information returned from SAS IOC.
8055 * @ioc: Pointer to MPT_ADAPTER structure
8056 * @log_info: U32 LogInfo reply word from the IOC
8057 * @cb_idx: callback function's handle
8058 *
8059 * Refer to lsi/mpi_log_sas.h.
8060 **/
8061 static void
8062 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8063 {
8064 union loginfo_type {
8065 u32 loginfo;
8066 struct {
8067 u32 subcode:16;
8068 u32 code:8;
8069 u32 originator:4;
8070 u32 bus_type:4;
8071 } dw;
8072 };
8073 union loginfo_type sas_loginfo;
8074 char *originator_desc = NULL;
8075 char *code_desc = NULL;
8076 char *sub_code_desc = NULL;
8077
8078 sas_loginfo.loginfo = log_info;
8079 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8080 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8081 return;
8082
8083 originator_desc = originator_str[sas_loginfo.dw.originator];
8084
8085 switch (sas_loginfo.dw.originator) {
8086
8087 case 0: /* IOP */
8088 if (sas_loginfo.dw.code <
8089 ARRAY_SIZE(iop_code_str))
8090 code_desc = iop_code_str[sas_loginfo.dw.code];
8091 break;
8092 case 1: /* PL */
8093 if (sas_loginfo.dw.code <
8094 ARRAY_SIZE(pl_code_str))
8095 code_desc = pl_code_str[sas_loginfo.dw.code];
8096 break;
8097 case 2: /* IR */
8098 if (sas_loginfo.dw.code >=
8099 ARRAY_SIZE(ir_code_str))
8100 break;
8101 code_desc = ir_code_str[sas_loginfo.dw.code];
8102 if (sas_loginfo.dw.subcode >=
8103 ARRAY_SIZE(raid_sub_code_str))
8104 break;
8105 if (sas_loginfo.dw.code == 0)
8106 sub_code_desc =
8107 raid_sub_code_str[sas_loginfo.dw.subcode];
8108 break;
8109 default:
8110 return;
8111 }
8112
8113 if (sub_code_desc != NULL)
8114 printk(MYIOC_s_INFO_FMT
8115 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8116 " SubCode={%s} cb_idx %s\n",
8117 ioc->name, log_info, originator_desc, code_desc,
8118 sub_code_desc, MptCallbacksName[cb_idx]);
8119 else if (code_desc != NULL)
8120 printk(MYIOC_s_INFO_FMT
8121 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8122 " SubCode(0x%04x) cb_idx %s\n",
8123 ioc->name, log_info, originator_desc, code_desc,
8124 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8125 else
8126 printk(MYIOC_s_INFO_FMT
8127 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8128 " SubCode(0x%04x) cb_idx %s\n",
8129 ioc->name, log_info, originator_desc,
8130 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8131 MptCallbacksName[cb_idx]);
8132 }
8133
8134 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8135 /**
8136 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8137 * @ioc: Pointer to MPT_ADAPTER structure
8138 * @ioc_status: U32 IOCStatus word from IOC
8139 * @mf: Pointer to MPT request frame
8140 *
8141 * Refer to lsi/mpi.h.
8142 **/
8143 static void
8144 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8145 {
8146 Config_t *pReq = (Config_t *)mf;
8147 char extend_desc[EVENT_DESCR_STR_SZ];
8148 char *desc = NULL;
8149 u32 form;
8150 u8 page_type;
8151
8152 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8153 page_type = pReq->ExtPageType;
8154 else
8155 page_type = pReq->Header.PageType;
8156
8157 /*
8158 * ignore invalid page messages for GET_NEXT_HANDLE
8159 */
8160 form = le32_to_cpu(pReq->PageAddress);
8161 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8162 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8163 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8164 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8165 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8166 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8167 return;
8168 }
8169 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8170 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8171 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8172 return;
8173 }
8174
8175 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8176 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8177 page_type, pReq->Header.PageNumber, pReq->Action, form);
8178
8179 switch (ioc_status) {
8180
8181 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8182 desc = "Config Page Invalid Action";
8183 break;
8184
8185 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8186 desc = "Config Page Invalid Type";
8187 break;
8188
8189 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8190 desc = "Config Page Invalid Page";
8191 break;
8192
8193 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8194 desc = "Config Page Invalid Data";
8195 break;
8196
8197 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8198 desc = "Config Page No Defaults";
8199 break;
8200
8201 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8202 desc = "Config Page Can't Commit";
8203 break;
8204 }
8205
8206 if (!desc)
8207 return;
8208
8209 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8210 ioc->name, ioc_status, desc, extend_desc));
8211 }
8212
8213 /**
8214 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8215 * @ioc: Pointer to MPT_ADAPTER structure
8216 * @ioc_status: U32 IOCStatus word from IOC
8217 * @mf: Pointer to MPT request frame
8218 *
8219 * Refer to lsi/mpi.h.
8220 **/
8221 static void
8222 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8223 {
8224 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8225 char *desc = NULL;
8226
8227 switch (status) {
8228
8229 /****************************************************************************/
8230 /* Common IOCStatus values for all replies */
8231 /****************************************************************************/
8232
8233 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8234 desc = "Invalid Function";
8235 break;
8236
8237 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8238 desc = "Busy";
8239 break;
8240
8241 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8242 desc = "Invalid SGL";
8243 break;
8244
8245 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8246 desc = "Internal Error";
8247 break;
8248
8249 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8250 desc = "Reserved";
8251 break;
8252
8253 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8254 desc = "Insufficient Resources";
8255 break;
8256
8257 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8258 desc = "Invalid Field";
8259 break;
8260
8261 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8262 desc = "Invalid State";
8263 break;
8264
8265 /****************************************************************************/
8266 /* Config IOCStatus values */
8267 /****************************************************************************/
8268
8269 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8270 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8271 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8272 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8273 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8274 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8275 mpt_iocstatus_info_config(ioc, status, mf);
8276 break;
8277
8278 /****************************************************************************/
8279 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8280 /* */
8281 /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8282 /* */
8283 /****************************************************************************/
8284
8285 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8286 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8287 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8288 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8289 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8290 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8291 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8292 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8293 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8294 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8295 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8296 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8297 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8298 break;
8299
8300 /****************************************************************************/
8301 /* SCSI Target values */
8302 /****************************************************************************/
8303
8304 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8305 desc = "Target: Priority IO";
8306 break;
8307
8308 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8309 desc = "Target: Invalid Port";
8310 break;
8311
8312 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8313 desc = "Target Invalid IO Index:";
8314 break;
8315
8316 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8317 desc = "Target: Aborted";
8318 break;
8319
8320 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8321 desc = "Target: No Conn Retryable";
8322 break;
8323
8324 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8325 desc = "Target: No Connection";
8326 break;
8327
8328 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8329 desc = "Target: Transfer Count Mismatch";
8330 break;
8331
8332 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8333 desc = "Target: STS Data not Sent";
8334 break;
8335
8336 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8337 desc = "Target: Data Offset Error";
8338 break;
8339
8340 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8341 desc = "Target: Too Much Write Data";
8342 break;
8343
8344 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8345 desc = "Target: IU Too Short";
8346 break;
8347
8348 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8349 desc = "Target: ACK NAK Timeout";
8350 break;
8351
8352 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8353 desc = "Target: Nak Received";
8354 break;
8355
8356 /****************************************************************************/
8357 /* Fibre Channel Direct Access values */
8358 /****************************************************************************/
8359
8360 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8361 desc = "FC: Aborted";
8362 break;
8363
8364 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8365 desc = "FC: RX ID Invalid";
8366 break;
8367
8368 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8369 desc = "FC: DID Invalid";
8370 break;
8371
8372 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8373 desc = "FC: Node Logged Out";
8374 break;
8375
8376 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8377 desc = "FC: Exchange Canceled";
8378 break;
8379
8380 /****************************************************************************/
8381 /* LAN values */
8382 /****************************************************************************/
8383
8384 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8385 desc = "LAN: Device not Found";
8386 break;
8387
8388 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8389 desc = "LAN: Device Failure";
8390 break;
8391
8392 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8393 desc = "LAN: Transmit Error";
8394 break;
8395
8396 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8397 desc = "LAN: Transmit Aborted";
8398 break;
8399
8400 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8401 desc = "LAN: Receive Error";
8402 break;
8403
8404 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8405 desc = "LAN: Receive Aborted";
8406 break;
8407
8408 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8409 desc = "LAN: Partial Packet";
8410 break;
8411
8412 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8413 desc = "LAN: Canceled";
8414 break;
8415
8416 /****************************************************************************/
8417 /* Serial Attached SCSI values */
8418 /****************************************************************************/
8419
8420 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8421 desc = "SAS: SMP Request Failed";
8422 break;
8423
8424 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8425 desc = "SAS: SMP Data Overrun";
8426 break;
8427
8428 default:
8429 desc = "Others";
8430 break;
8431 }
8432
8433 if (!desc)
8434 return;
8435
8436 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8437 ioc->name, status, desc));
8438 }
8439
8440 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8441 EXPORT_SYMBOL(mpt_attach);
8442 EXPORT_SYMBOL(mpt_detach);
8443 #ifdef CONFIG_PM
8444 EXPORT_SYMBOL(mpt_resume);
8445 EXPORT_SYMBOL(mpt_suspend);
8446 #endif
8447 EXPORT_SYMBOL(ioc_list);
8448 EXPORT_SYMBOL(mpt_register);
8449 EXPORT_SYMBOL(mpt_deregister);
8450 EXPORT_SYMBOL(mpt_event_register);
8451 EXPORT_SYMBOL(mpt_event_deregister);
8452 EXPORT_SYMBOL(mpt_reset_register);
8453 EXPORT_SYMBOL(mpt_reset_deregister);
8454 EXPORT_SYMBOL(mpt_device_driver_register);
8455 EXPORT_SYMBOL(mpt_device_driver_deregister);
8456 EXPORT_SYMBOL(mpt_get_msg_frame);
8457 EXPORT_SYMBOL(mpt_put_msg_frame);
8458 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8459 EXPORT_SYMBOL(mpt_free_msg_frame);
8460 EXPORT_SYMBOL(mpt_send_handshake_request);
8461 EXPORT_SYMBOL(mpt_verify_adapter);
8462 EXPORT_SYMBOL(mpt_GetIocState);
8463 EXPORT_SYMBOL(mpt_print_ioc_summary);
8464 EXPORT_SYMBOL(mpt_HardResetHandler);
8465 EXPORT_SYMBOL(mpt_config);
8466 EXPORT_SYMBOL(mpt_findImVolumes);
8467 EXPORT_SYMBOL(mpt_alloc_fw_memory);
8468 EXPORT_SYMBOL(mpt_free_fw_memory);
8469 EXPORT_SYMBOL(mptbase_sas_persist_operation);
8470 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8471
8472 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8473 /**
8474 * fusion_init - Fusion MPT base driver initialization routine.
8475 *
8476 * Returns 0 for success, non-zero for failure.
8477 */
8478 static int __init
8479 fusion_init(void)
8480 {
8481 u8 cb_idx;
8482
8483 show_mptmod_ver(my_NAME, my_VERSION);
8484 printk(KERN_INFO COPYRIGHT "\n");
8485
8486 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8487 MptCallbacks[cb_idx] = NULL;
8488 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8489 MptEvHandlers[cb_idx] = NULL;
8490 MptResetHandlers[cb_idx] = NULL;
8491 }
8492
8493 /* Register ourselves (mptbase) in order to facilitate
8494 * EventNotification handling.
8495 */
8496 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8497 "mptbase_reply");
8498
8499 /* Register for hard reset handling callbacks.
8500 */
8501 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8502
8503 #ifdef CONFIG_PROC_FS
8504 (void) procmpt_create();
8505 #endif
8506 return 0;
8507 }
8508
8509 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8510 /**
8511 * fusion_exit - Perform driver unload cleanup.
8512 *
8513 * This routine frees all resources associated with each MPT adapter
8514 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8515 */
8516 static void __exit
8517 fusion_exit(void)
8518 {
8519
8520 mpt_reset_deregister(mpt_base_index);
8521
8522 #ifdef CONFIG_PROC_FS
8523 procmpt_destroy();
8524 #endif
8525 }
8526
8527 module_init(fusion_init);
8528 module_exit(fusion_exit);
Linux with added FPC-III support