1 // SPDX-License-Identifier: GPL-2.0-only
3 * linux/kernel/power/swap.c
5 * This file provides functions for reading the suspend image from
6 * and writing it to a swap partition.
8 * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
9 * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
10 * Copyright (C) 2010-2012 Bojan Smojver <bojan@rexursive.com>
13 #define pr_fmt(fmt) "PM: " fmt
15 #include <linux/module.h>
16 #include <linux/file.h>
17 #include <linux/delay.h>
18 #include <linux/bitops.h>
19 #include <linux/genhd.h>
20 #include <linux/device.h>
21 #include <linux/bio.h>
22 #include <linux/blkdev.h>
23 #include <linux/swap.h>
24 #include <linux/swapops.h>
26 #include <linux/slab.h>
27 #include <linux/lzo.h>
28 #include <linux/vmalloc.h>
29 #include <linux/cpumask.h>
30 #include <linux/atomic.h>
31 #include <linux/kthread.h>
32 #include <linux/crc32.h>
33 #include <linux/ktime.h>
37 #define HIBERNATE_SIG "S1SUSPEND"
40 * When reading an {un,}compressed image, we may restore pages in place,
41 * in which case some architectures need these pages cleaning before they
42 * can be executed. We don't know which pages these may be, so clean the lot.
44 static bool clean_pages_on_read
;
45 static bool clean_pages_on_decompress
;
48 * The swap map is a data structure used for keeping track of each page
49 * written to a swap partition. It consists of many swap_map_page
50 * structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
51 * These structures are stored on the swap and linked together with the
52 * help of the .next_swap member.
54 * The swap map is created during suspend. The swap map pages are
55 * allocated and populated one at a time, so we only need one memory
56 * page to set up the entire structure.
58 * During resume we pick up all swap_map_page structures into a list.
61 #define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1)
64 * Number of free pages that are not high.
66 static inline unsigned long low_free_pages(void)
68 return nr_free_pages() - nr_free_highpages();
72 * Number of pages required to be kept free while writing the image. Always
73 * half of all available low pages before the writing starts.
75 static inline unsigned long reqd_free_pages(void)
77 return low_free_pages() / 2;
80 struct swap_map_page
{
81 sector_t entries
[MAP_PAGE_ENTRIES
];
85 struct swap_map_page_list
{
86 struct swap_map_page
*map
;
87 struct swap_map_page_list
*next
;
91 * The swap_map_handle structure is used for handling swap in
95 struct swap_map_handle
{
96 struct swap_map_page
*cur
;
97 struct swap_map_page_list
*maps
;
99 sector_t first_sector
;
101 unsigned long reqd_free_pages
;
105 struct swsusp_header
{
106 char reserved
[PAGE_SIZE
- 20 - sizeof(sector_t
) - sizeof(int) -
110 unsigned int flags
; /* Flags to pass to the "boot" kernel */
115 static struct swsusp_header
*swsusp_header
;
118 * The following functions are used for tracing the allocated
119 * swap pages, so that they can be freed in case of an error.
122 struct swsusp_extent
{
128 static struct rb_root swsusp_extents
= RB_ROOT
;
130 static int swsusp_extents_insert(unsigned long swap_offset
)
132 struct rb_node
**new = &(swsusp_extents
.rb_node
);
133 struct rb_node
*parent
= NULL
;
134 struct swsusp_extent
*ext
;
136 /* Figure out where to put the new node */
138 ext
= rb_entry(*new, struct swsusp_extent
, node
);
140 if (swap_offset
< ext
->start
) {
142 if (swap_offset
== ext
->start
- 1) {
146 new = &((*new)->rb_left
);
147 } else if (swap_offset
> ext
->end
) {
149 if (swap_offset
== ext
->end
+ 1) {
153 new = &((*new)->rb_right
);
155 /* It already is in the tree */
159 /* Add the new node and rebalance the tree. */
160 ext
= kzalloc(sizeof(struct swsusp_extent
), GFP_KERNEL
);
164 ext
->start
= swap_offset
;
165 ext
->end
= swap_offset
;
166 rb_link_node(&ext
->node
, parent
, new);
167 rb_insert_color(&ext
->node
, &swsusp_extents
);
172 * alloc_swapdev_block - allocate a swap page and register that it has
173 * been allocated, so that it can be freed in case of an error.
176 sector_t
alloc_swapdev_block(int swap
)
178 unsigned long offset
;
180 offset
= swp_offset(get_swap_page_of_type(swap
));
182 if (swsusp_extents_insert(offset
))
183 swap_free(swp_entry(swap
, offset
));
185 return swapdev_block(swap
, offset
);
191 * free_all_swap_pages - free swap pages allocated for saving image data.
192 * It also frees the extents used to register which swap entries had been
196 void free_all_swap_pages(int swap
)
198 struct rb_node
*node
;
200 while ((node
= swsusp_extents
.rb_node
)) {
201 struct swsusp_extent
*ext
;
202 unsigned long offset
;
204 ext
= rb_entry(node
, struct swsusp_extent
, node
);
205 rb_erase(node
, &swsusp_extents
);
206 for (offset
= ext
->start
; offset
<= ext
->end
; offset
++)
207 swap_free(swp_entry(swap
, offset
));
213 int swsusp_swap_in_use(void)
215 return (swsusp_extents
.rb_node
!= NULL
);
222 static unsigned short root_swap
= 0xffff;
223 static struct block_device
*hib_resume_bdev
;
225 struct hib_bio_batch
{
227 wait_queue_head_t wait
;
231 static void hib_init_batch(struct hib_bio_batch
*hb
)
233 atomic_set(&hb
->count
, 0);
234 init_waitqueue_head(&hb
->wait
);
235 hb
->error
= BLK_STS_OK
;
238 static void hib_end_io(struct bio
*bio
)
240 struct hib_bio_batch
*hb
= bio
->bi_private
;
241 struct page
*page
= bio_first_page_all(bio
);
243 if (bio
->bi_status
) {
244 pr_alert("Read-error on swap-device (%u:%u:%Lu)\n",
245 MAJOR(bio_dev(bio
)), MINOR(bio_dev(bio
)),
246 (unsigned long long)bio
->bi_iter
.bi_sector
);
249 if (bio_data_dir(bio
) == WRITE
)
251 else if (clean_pages_on_read
)
252 flush_icache_range((unsigned long)page_address(page
),
253 (unsigned long)page_address(page
) + PAGE_SIZE
);
255 if (bio
->bi_status
&& !hb
->error
)
256 hb
->error
= bio
->bi_status
;
257 if (atomic_dec_and_test(&hb
->count
))
263 static int hib_submit_io(int op
, int op_flags
, pgoff_t page_off
, void *addr
,
264 struct hib_bio_batch
*hb
)
266 struct page
*page
= virt_to_page(addr
);
270 bio
= bio_alloc(GFP_NOIO
| __GFP_HIGH
, 1);
271 bio
->bi_iter
.bi_sector
= page_off
* (PAGE_SIZE
>> 9);
272 bio_set_dev(bio
, hib_resume_bdev
);
273 bio_set_op_attrs(bio
, op
, op_flags
);
275 if (bio_add_page(bio
, page
, PAGE_SIZE
, 0) < PAGE_SIZE
) {
276 pr_err("Adding page to bio failed at %llu\n",
277 (unsigned long long)bio
->bi_iter
.bi_sector
);
283 bio
->bi_end_io
= hib_end_io
;
284 bio
->bi_private
= hb
;
285 atomic_inc(&hb
->count
);
288 error
= submit_bio_wait(bio
);
295 static blk_status_t
hib_wait_io(struct hib_bio_batch
*hb
)
297 wait_event(hb
->wait
, atomic_read(&hb
->count
) == 0);
298 return blk_status_to_errno(hb
->error
);
305 static int mark_swapfiles(struct swap_map_handle
*handle
, unsigned int flags
)
309 hib_submit_io(REQ_OP_READ
, 0, swsusp_resume_block
,
310 swsusp_header
, NULL
);
311 if (!memcmp("SWAP-SPACE",swsusp_header
->sig
, 10) ||
312 !memcmp("SWAPSPACE2",swsusp_header
->sig
, 10)) {
313 memcpy(swsusp_header
->orig_sig
,swsusp_header
->sig
, 10);
314 memcpy(swsusp_header
->sig
, HIBERNATE_SIG
, 10);
315 swsusp_header
->image
= handle
->first_sector
;
316 swsusp_header
->flags
= flags
;
317 if (flags
& SF_CRC32_MODE
)
318 swsusp_header
->crc32
= handle
->crc32
;
319 error
= hib_submit_io(REQ_OP_WRITE
, REQ_SYNC
,
320 swsusp_resume_block
, swsusp_header
, NULL
);
322 pr_err("Swap header not found!\n");
329 * swsusp_swap_check - check if the resume device is a swap device
330 * and get its index (if so)
332 * This is called before saving image
334 static int swsusp_swap_check(void)
338 res
= swap_type_of(swsusp_resume_device
, swsusp_resume_block
,
344 res
= blkdev_get(hib_resume_bdev
, FMODE_WRITE
, NULL
);
348 res
= set_blocksize(hib_resume_bdev
, PAGE_SIZE
);
350 blkdev_put(hib_resume_bdev
, FMODE_WRITE
);
353 * Update the resume device to the one actually used,
354 * so the test_resume mode can use it in case it is
355 * invoked from hibernate() to test the snapshot.
357 swsusp_resume_device
= hib_resume_bdev
->bd_dev
;
362 * write_page - Write one page to given swap location.
363 * @buf: Address we're writing.
364 * @offset: Offset of the swap page we're writing to.
365 * @hb: bio completion batch
368 static int write_page(void *buf
, sector_t offset
, struct hib_bio_batch
*hb
)
377 src
= (void *)__get_free_page(GFP_NOIO
| __GFP_NOWARN
|
382 ret
= hib_wait_io(hb
); /* Free pages */
385 src
= (void *)__get_free_page(GFP_NOIO
|
392 hb
= NULL
; /* Go synchronous */
399 return hib_submit_io(REQ_OP_WRITE
, REQ_SYNC
, offset
, src
, hb
);
402 static void release_swap_writer(struct swap_map_handle
*handle
)
405 free_page((unsigned long)handle
->cur
);
409 static int get_swap_writer(struct swap_map_handle
*handle
)
413 ret
= swsusp_swap_check();
416 pr_err("Cannot find swap device, try swapon -a\n");
419 handle
->cur
= (struct swap_map_page
*)get_zeroed_page(GFP_KERNEL
);
424 handle
->cur_swap
= alloc_swapdev_block(root_swap
);
425 if (!handle
->cur_swap
) {
430 handle
->reqd_free_pages
= reqd_free_pages();
431 handle
->first_sector
= handle
->cur_swap
;
434 release_swap_writer(handle
);
436 swsusp_close(FMODE_WRITE
);
440 static int swap_write_page(struct swap_map_handle
*handle
, void *buf
,
441 struct hib_bio_batch
*hb
)
448 offset
= alloc_swapdev_block(root_swap
);
449 error
= write_page(buf
, offset
, hb
);
452 handle
->cur
->entries
[handle
->k
++] = offset
;
453 if (handle
->k
>= MAP_PAGE_ENTRIES
) {
454 offset
= alloc_swapdev_block(root_swap
);
457 handle
->cur
->next_swap
= offset
;
458 error
= write_page(handle
->cur
, handle
->cur_swap
, hb
);
461 clear_page(handle
->cur
);
462 handle
->cur_swap
= offset
;
465 if (hb
&& low_free_pages() <= handle
->reqd_free_pages
) {
466 error
= hib_wait_io(hb
);
470 * Recalculate the number of required free pages, to
471 * make sure we never take more than half.
473 handle
->reqd_free_pages
= reqd_free_pages();
480 static int flush_swap_writer(struct swap_map_handle
*handle
)
482 if (handle
->cur
&& handle
->cur_swap
)
483 return write_page(handle
->cur
, handle
->cur_swap
, NULL
);
488 static int swap_writer_finish(struct swap_map_handle
*handle
,
489 unsigned int flags
, int error
)
492 flush_swap_writer(handle
);
494 error
= mark_swapfiles(handle
, flags
);
499 free_all_swap_pages(root_swap
);
500 release_swap_writer(handle
);
501 swsusp_close(FMODE_WRITE
);
506 /* We need to remember how much compressed data we need to read. */
507 #define LZO_HEADER sizeof(size_t)
509 /* Number of pages/bytes we'll compress at one time. */
510 #define LZO_UNC_PAGES 32
511 #define LZO_UNC_SIZE (LZO_UNC_PAGES * PAGE_SIZE)
513 /* Number of pages/bytes we need for compressed data (worst case). */
514 #define LZO_CMP_PAGES DIV_ROUND_UP(lzo1x_worst_compress(LZO_UNC_SIZE) + \
515 LZO_HEADER, PAGE_SIZE)
516 #define LZO_CMP_SIZE (LZO_CMP_PAGES * PAGE_SIZE)
518 /* Maximum number of threads for compression/decompression. */
519 #define LZO_THREADS 3
521 /* Minimum/maximum number of pages for read buffering. */
522 #define LZO_MIN_RD_PAGES 1024
523 #define LZO_MAX_RD_PAGES 8192
527 * save_image - save the suspend image data
530 static int save_image(struct swap_map_handle
*handle
,
531 struct snapshot_handle
*snapshot
,
532 unsigned int nr_to_write
)
538 struct hib_bio_batch hb
;
544 pr_info("Saving image data pages (%u pages)...\n",
546 m
= nr_to_write
/ 10;
552 ret
= snapshot_read_next(snapshot
);
555 ret
= swap_write_page(handle
, data_of(*snapshot
), &hb
);
559 pr_info("Image saving progress: %3d%%\n",
563 err2
= hib_wait_io(&hb
);
568 pr_info("Image saving done\n");
569 swsusp_show_speed(start
, stop
, nr_to_write
, "Wrote");
574 * Structure used for CRC32.
577 struct task_struct
*thr
; /* thread */
578 atomic_t ready
; /* ready to start flag */
579 atomic_t stop
; /* ready to stop flag */
580 unsigned run_threads
; /* nr current threads */
581 wait_queue_head_t go
; /* start crc update */
582 wait_queue_head_t done
; /* crc update done */
583 u32
*crc32
; /* points to handle's crc32 */
584 size_t *unc_len
[LZO_THREADS
]; /* uncompressed lengths */
585 unsigned char *unc
[LZO_THREADS
]; /* uncompressed data */
589 * CRC32 update function that runs in its own thread.
591 static int crc32_threadfn(void *data
)
593 struct crc_data
*d
= data
;
597 wait_event(d
->go
, atomic_read(&d
->ready
) ||
598 kthread_should_stop());
599 if (kthread_should_stop()) {
601 atomic_set(&d
->stop
, 1);
605 atomic_set(&d
->ready
, 0);
607 for (i
= 0; i
< d
->run_threads
; i
++)
608 *d
->crc32
= crc32_le(*d
->crc32
,
609 d
->unc
[i
], *d
->unc_len
[i
]);
610 atomic_set(&d
->stop
, 1);
616 * Structure used for LZO data compression.
619 struct task_struct
*thr
; /* thread */
620 atomic_t ready
; /* ready to start flag */
621 atomic_t stop
; /* ready to stop flag */
622 int ret
; /* return code */
623 wait_queue_head_t go
; /* start compression */
624 wait_queue_head_t done
; /* compression done */
625 size_t unc_len
; /* uncompressed length */
626 size_t cmp_len
; /* compressed length */
627 unsigned char unc
[LZO_UNC_SIZE
]; /* uncompressed buffer */
628 unsigned char cmp
[LZO_CMP_SIZE
]; /* compressed buffer */
629 unsigned char wrk
[LZO1X_1_MEM_COMPRESS
]; /* compression workspace */
633 * Compression function that runs in its own thread.
635 static int lzo_compress_threadfn(void *data
)
637 struct cmp_data
*d
= data
;
640 wait_event(d
->go
, atomic_read(&d
->ready
) ||
641 kthread_should_stop());
642 if (kthread_should_stop()) {
645 atomic_set(&d
->stop
, 1);
649 atomic_set(&d
->ready
, 0);
651 d
->ret
= lzo1x_1_compress(d
->unc
, d
->unc_len
,
652 d
->cmp
+ LZO_HEADER
, &d
->cmp_len
,
654 atomic_set(&d
->stop
, 1);
661 * save_image_lzo - Save the suspend image data compressed with LZO.
662 * @handle: Swap map handle to use for saving the image.
663 * @snapshot: Image to read data from.
664 * @nr_to_write: Number of pages to save.
666 static int save_image_lzo(struct swap_map_handle
*handle
,
667 struct snapshot_handle
*snapshot
,
668 unsigned int nr_to_write
)
674 struct hib_bio_batch hb
;
678 unsigned thr
, run_threads
, nr_threads
;
679 unsigned char *page
= NULL
;
680 struct cmp_data
*data
= NULL
;
681 struct crc_data
*crc
= NULL
;
686 * We'll limit the number of threads for compression to limit memory
689 nr_threads
= num_online_cpus() - 1;
690 nr_threads
= clamp_val(nr_threads
, 1, LZO_THREADS
);
692 page
= (void *)__get_free_page(GFP_NOIO
| __GFP_HIGH
);
694 pr_err("Failed to allocate LZO page\n");
699 data
= vmalloc(array_size(nr_threads
, sizeof(*data
)));
701 pr_err("Failed to allocate LZO data\n");
705 for (thr
= 0; thr
< nr_threads
; thr
++)
706 memset(&data
[thr
], 0, offsetof(struct cmp_data
, go
));
708 crc
= kmalloc(sizeof(*crc
), GFP_KERNEL
);
710 pr_err("Failed to allocate crc\n");
714 memset(crc
, 0, offsetof(struct crc_data
, go
));
717 * Start the compression threads.
719 for (thr
= 0; thr
< nr_threads
; thr
++) {
720 init_waitqueue_head(&data
[thr
].go
);
721 init_waitqueue_head(&data
[thr
].done
);
723 data
[thr
].thr
= kthread_run(lzo_compress_threadfn
,
725 "image_compress/%u", thr
);
726 if (IS_ERR(data
[thr
].thr
)) {
727 data
[thr
].thr
= NULL
;
728 pr_err("Cannot start compression threads\n");
735 * Start the CRC32 thread.
737 init_waitqueue_head(&crc
->go
);
738 init_waitqueue_head(&crc
->done
);
741 crc
->crc32
= &handle
->crc32
;
742 for (thr
= 0; thr
< nr_threads
; thr
++) {
743 crc
->unc
[thr
] = data
[thr
].unc
;
744 crc
->unc_len
[thr
] = &data
[thr
].unc_len
;
747 crc
->thr
= kthread_run(crc32_threadfn
, crc
, "image_crc32");
748 if (IS_ERR(crc
->thr
)) {
750 pr_err("Cannot start CRC32 thread\n");
756 * Adjust the number of required free pages after all allocations have
757 * been done. We don't want to run out of pages when writing.
759 handle
->reqd_free_pages
= reqd_free_pages();
761 pr_info("Using %u thread(s) for compression\n", nr_threads
);
762 pr_info("Compressing and saving image data (%u pages)...\n",
764 m
= nr_to_write
/ 10;
770 for (thr
= 0; thr
< nr_threads
; thr
++) {
771 for (off
= 0; off
< LZO_UNC_SIZE
; off
+= PAGE_SIZE
) {
772 ret
= snapshot_read_next(snapshot
);
779 memcpy(data
[thr
].unc
+ off
,
780 data_of(*snapshot
), PAGE_SIZE
);
783 pr_info("Image saving progress: %3d%%\n",
790 data
[thr
].unc_len
= off
;
792 atomic_set(&data
[thr
].ready
, 1);
793 wake_up(&data
[thr
].go
);
799 crc
->run_threads
= thr
;
800 atomic_set(&crc
->ready
, 1);
803 for (run_threads
= thr
, thr
= 0; thr
< run_threads
; thr
++) {
804 wait_event(data
[thr
].done
,
805 atomic_read(&data
[thr
].stop
));
806 atomic_set(&data
[thr
].stop
, 0);
811 pr_err("LZO compression failed\n");
815 if (unlikely(!data
[thr
].cmp_len
||
817 lzo1x_worst_compress(data
[thr
].unc_len
))) {
818 pr_err("Invalid LZO compressed length\n");
823 *(size_t *)data
[thr
].cmp
= data
[thr
].cmp_len
;
826 * Given we are writing one page at a time to disk, we
827 * copy that much from the buffer, although the last
828 * bit will likely be smaller than full page. This is
829 * OK - we saved the length of the compressed data, so
830 * any garbage at the end will be discarded when we
834 off
< LZO_HEADER
+ data
[thr
].cmp_len
;
836 memcpy(page
, data
[thr
].cmp
+ off
, PAGE_SIZE
);
838 ret
= swap_write_page(handle
, page
, &hb
);
844 wait_event(crc
->done
, atomic_read(&crc
->stop
));
845 atomic_set(&crc
->stop
, 0);
849 err2
= hib_wait_io(&hb
);
854 pr_info("Image saving done\n");
855 swsusp_show_speed(start
, stop
, nr_to_write
, "Wrote");
859 kthread_stop(crc
->thr
);
863 for (thr
= 0; thr
< nr_threads
; thr
++)
865 kthread_stop(data
[thr
].thr
);
868 if (page
) free_page((unsigned long)page
);
874 * enough_swap - Make sure we have enough swap to save the image.
876 * Returns TRUE or FALSE after checking the total amount of swap
877 * space avaiable from the resume partition.
880 static int enough_swap(unsigned int nr_pages
)
882 unsigned int free_swap
= count_swap_pages(root_swap
, 1);
883 unsigned int required
;
885 pr_debug("Free swap pages: %u\n", free_swap
);
887 required
= PAGES_FOR_IO
+ nr_pages
;
888 return free_swap
> required
;
892 * swsusp_write - Write entire image and metadata.
893 * @flags: flags to pass to the "boot" kernel in the image header
895 * It is important _NOT_ to umount filesystems at this point. We want
896 * them synced (in case something goes wrong) but we DO not want to mark
897 * filesystem clean: it is not. (And it does not matter, if we resume
898 * correctly, we'll mark system clean, anyway.)
901 int swsusp_write(unsigned int flags
)
903 struct swap_map_handle handle
;
904 struct snapshot_handle snapshot
;
905 struct swsusp_info
*header
;
909 pages
= snapshot_get_image_size();
910 error
= get_swap_writer(&handle
);
912 pr_err("Cannot get swap writer\n");
915 if (flags
& SF_NOCOMPRESS_MODE
) {
916 if (!enough_swap(pages
)) {
917 pr_err("Not enough free swap\n");
922 memset(&snapshot
, 0, sizeof(struct snapshot_handle
));
923 error
= snapshot_read_next(&snapshot
);
924 if (error
< (int)PAGE_SIZE
) {
930 header
= (struct swsusp_info
*)data_of(snapshot
);
931 error
= swap_write_page(&handle
, header
, NULL
);
933 error
= (flags
& SF_NOCOMPRESS_MODE
) ?
934 save_image(&handle
, &snapshot
, pages
- 1) :
935 save_image_lzo(&handle
, &snapshot
, pages
- 1);
938 error
= swap_writer_finish(&handle
, flags
, error
);
943 * The following functions allow us to read data using a swap map
944 * in a file-alike way
947 static void release_swap_reader(struct swap_map_handle
*handle
)
949 struct swap_map_page_list
*tmp
;
951 while (handle
->maps
) {
952 if (handle
->maps
->map
)
953 free_page((unsigned long)handle
->maps
->map
);
955 handle
->maps
= handle
->maps
->next
;
961 static int get_swap_reader(struct swap_map_handle
*handle
,
962 unsigned int *flags_p
)
965 struct swap_map_page_list
*tmp
, *last
;
968 *flags_p
= swsusp_header
->flags
;
970 if (!swsusp_header
->image
) /* how can this happen? */
974 last
= handle
->maps
= NULL
;
975 offset
= swsusp_header
->image
;
977 tmp
= kmalloc(sizeof(*handle
->maps
), GFP_KERNEL
);
979 release_swap_reader(handle
);
982 memset(tmp
, 0, sizeof(*tmp
));
989 tmp
->map
= (struct swap_map_page
*)
990 __get_free_page(GFP_NOIO
| __GFP_HIGH
);
992 release_swap_reader(handle
);
996 error
= hib_submit_io(REQ_OP_READ
, 0, offset
, tmp
->map
, NULL
);
998 release_swap_reader(handle
);
1001 offset
= tmp
->map
->next_swap
;
1004 handle
->cur
= handle
->maps
->map
;
1008 static int swap_read_page(struct swap_map_handle
*handle
, void *buf
,
1009 struct hib_bio_batch
*hb
)
1013 struct swap_map_page_list
*tmp
;
1017 offset
= handle
->cur
->entries
[handle
->k
];
1020 error
= hib_submit_io(REQ_OP_READ
, 0, offset
, buf
, hb
);
1023 if (++handle
->k
>= MAP_PAGE_ENTRIES
) {
1025 free_page((unsigned long)handle
->maps
->map
);
1027 handle
->maps
= handle
->maps
->next
;
1030 release_swap_reader(handle
);
1032 handle
->cur
= handle
->maps
->map
;
1037 static int swap_reader_finish(struct swap_map_handle
*handle
)
1039 release_swap_reader(handle
);
1045 * load_image - load the image using the swap map handle
1046 * @handle and the snapshot handle @snapshot
1047 * (assume there are @nr_pages pages to load)
1050 static int load_image(struct swap_map_handle
*handle
,
1051 struct snapshot_handle
*snapshot
,
1052 unsigned int nr_to_read
)
1058 struct hib_bio_batch hb
;
1062 hib_init_batch(&hb
);
1064 clean_pages_on_read
= true;
1065 pr_info("Loading image data pages (%u pages)...\n", nr_to_read
);
1066 m
= nr_to_read
/ 10;
1070 start
= ktime_get();
1072 ret
= snapshot_write_next(snapshot
);
1075 ret
= swap_read_page(handle
, data_of(*snapshot
), &hb
);
1078 if (snapshot
->sync_read
)
1079 ret
= hib_wait_io(&hb
);
1082 if (!(nr_pages
% m
))
1083 pr_info("Image loading progress: %3d%%\n",
1087 err2
= hib_wait_io(&hb
);
1092 pr_info("Image loading done\n");
1093 snapshot_write_finalize(snapshot
);
1094 if (!snapshot_image_loaded(snapshot
))
1097 swsusp_show_speed(start
, stop
, nr_to_read
, "Read");
1102 * Structure used for LZO data decompression.
1105 struct task_struct
*thr
; /* thread */
1106 atomic_t ready
; /* ready to start flag */
1107 atomic_t stop
; /* ready to stop flag */
1108 int ret
; /* return code */
1109 wait_queue_head_t go
; /* start decompression */
1110 wait_queue_head_t done
; /* decompression done */
1111 size_t unc_len
; /* uncompressed length */
1112 size_t cmp_len
; /* compressed length */
1113 unsigned char unc
[LZO_UNC_SIZE
]; /* uncompressed buffer */
1114 unsigned char cmp
[LZO_CMP_SIZE
]; /* compressed buffer */
1118 * Deompression function that runs in its own thread.
1120 static int lzo_decompress_threadfn(void *data
)
1122 struct dec_data
*d
= data
;
1125 wait_event(d
->go
, atomic_read(&d
->ready
) ||
1126 kthread_should_stop());
1127 if (kthread_should_stop()) {
1130 atomic_set(&d
->stop
, 1);
1134 atomic_set(&d
->ready
, 0);
1136 d
->unc_len
= LZO_UNC_SIZE
;
1137 d
->ret
= lzo1x_decompress_safe(d
->cmp
+ LZO_HEADER
, d
->cmp_len
,
1138 d
->unc
, &d
->unc_len
);
1139 if (clean_pages_on_decompress
)
1140 flush_icache_range((unsigned long)d
->unc
,
1141 (unsigned long)d
->unc
+ d
->unc_len
);
1143 atomic_set(&d
->stop
, 1);
1150 * load_image_lzo - Load compressed image data and decompress them with LZO.
1151 * @handle: Swap map handle to use for loading data.
1152 * @snapshot: Image to copy uncompressed data into.
1153 * @nr_to_read: Number of pages to load.
1155 static int load_image_lzo(struct swap_map_handle
*handle
,
1156 struct snapshot_handle
*snapshot
,
1157 unsigned int nr_to_read
)
1162 struct hib_bio_batch hb
;
1167 unsigned i
, thr
, run_threads
, nr_threads
;
1168 unsigned ring
= 0, pg
= 0, ring_size
= 0,
1169 have
= 0, want
, need
, asked
= 0;
1170 unsigned long read_pages
= 0;
1171 unsigned char **page
= NULL
;
1172 struct dec_data
*data
= NULL
;
1173 struct crc_data
*crc
= NULL
;
1175 hib_init_batch(&hb
);
1178 * We'll limit the number of threads for decompression to limit memory
1181 nr_threads
= num_online_cpus() - 1;
1182 nr_threads
= clamp_val(nr_threads
, 1, LZO_THREADS
);
1184 page
= vmalloc(array_size(LZO_MAX_RD_PAGES
, sizeof(*page
)));
1186 pr_err("Failed to allocate LZO page\n");
1191 data
= vmalloc(array_size(nr_threads
, sizeof(*data
)));
1193 pr_err("Failed to allocate LZO data\n");
1197 for (thr
= 0; thr
< nr_threads
; thr
++)
1198 memset(&data
[thr
], 0, offsetof(struct dec_data
, go
));
1200 crc
= kmalloc(sizeof(*crc
), GFP_KERNEL
);
1202 pr_err("Failed to allocate crc\n");
1206 memset(crc
, 0, offsetof(struct crc_data
, go
));
1208 clean_pages_on_decompress
= true;
1211 * Start the decompression threads.
1213 for (thr
= 0; thr
< nr_threads
; thr
++) {
1214 init_waitqueue_head(&data
[thr
].go
);
1215 init_waitqueue_head(&data
[thr
].done
);
1217 data
[thr
].thr
= kthread_run(lzo_decompress_threadfn
,
1219 "image_decompress/%u", thr
);
1220 if (IS_ERR(data
[thr
].thr
)) {
1221 data
[thr
].thr
= NULL
;
1222 pr_err("Cannot start decompression threads\n");
1229 * Start the CRC32 thread.
1231 init_waitqueue_head(&crc
->go
);
1232 init_waitqueue_head(&crc
->done
);
1235 crc
->crc32
= &handle
->crc32
;
1236 for (thr
= 0; thr
< nr_threads
; thr
++) {
1237 crc
->unc
[thr
] = data
[thr
].unc
;
1238 crc
->unc_len
[thr
] = &data
[thr
].unc_len
;
1241 crc
->thr
= kthread_run(crc32_threadfn
, crc
, "image_crc32");
1242 if (IS_ERR(crc
->thr
)) {
1244 pr_err("Cannot start CRC32 thread\n");
1250 * Set the number of pages for read buffering.
1251 * This is complete guesswork, because we'll only know the real
1252 * picture once prepare_image() is called, which is much later on
1253 * during the image load phase. We'll assume the worst case and
1254 * say that none of the image pages are from high memory.
1256 if (low_free_pages() > snapshot_get_image_size())
1257 read_pages
= (low_free_pages() - snapshot_get_image_size()) / 2;
1258 read_pages
= clamp_val(read_pages
, LZO_MIN_RD_PAGES
, LZO_MAX_RD_PAGES
);
1260 for (i
= 0; i
< read_pages
; i
++) {
1261 page
[i
] = (void *)__get_free_page(i
< LZO_CMP_PAGES
?
1262 GFP_NOIO
| __GFP_HIGH
:
1263 GFP_NOIO
| __GFP_NOWARN
|
1267 if (i
< LZO_CMP_PAGES
) {
1269 pr_err("Failed to allocate LZO pages\n");
1277 want
= ring_size
= i
;
1279 pr_info("Using %u thread(s) for decompression\n", nr_threads
);
1280 pr_info("Loading and decompressing image data (%u pages)...\n",
1282 m
= nr_to_read
/ 10;
1286 start
= ktime_get();
1288 ret
= snapshot_write_next(snapshot
);
1293 for (i
= 0; !eof
&& i
< want
; i
++) {
1294 ret
= swap_read_page(handle
, page
[ring
], &hb
);
1297 * On real read error, finish. On end of data,
1298 * set EOF flag and just exit the read loop.
1301 handle
->cur
->entries
[handle
->k
]) {
1308 if (++ring
>= ring_size
)
1315 * We are out of data, wait for some more.
1321 ret
= hib_wait_io(&hb
);
1330 if (crc
->run_threads
) {
1331 wait_event(crc
->done
, atomic_read(&crc
->stop
));
1332 atomic_set(&crc
->stop
, 0);
1333 crc
->run_threads
= 0;
1336 for (thr
= 0; have
&& thr
< nr_threads
; thr
++) {
1337 data
[thr
].cmp_len
= *(size_t *)page
[pg
];
1338 if (unlikely(!data
[thr
].cmp_len
||
1340 lzo1x_worst_compress(LZO_UNC_SIZE
))) {
1341 pr_err("Invalid LZO compressed length\n");
1346 need
= DIV_ROUND_UP(data
[thr
].cmp_len
+ LZO_HEADER
,
1357 off
< LZO_HEADER
+ data
[thr
].cmp_len
;
1359 memcpy(data
[thr
].cmp
+ off
,
1360 page
[pg
], PAGE_SIZE
);
1363 if (++pg
>= ring_size
)
1367 atomic_set(&data
[thr
].ready
, 1);
1368 wake_up(&data
[thr
].go
);
1372 * Wait for more data while we are decompressing.
1374 if (have
< LZO_CMP_PAGES
&& asked
) {
1375 ret
= hib_wait_io(&hb
);
1384 for (run_threads
= thr
, thr
= 0; thr
< run_threads
; thr
++) {
1385 wait_event(data
[thr
].done
,
1386 atomic_read(&data
[thr
].stop
));
1387 atomic_set(&data
[thr
].stop
, 0);
1389 ret
= data
[thr
].ret
;
1392 pr_err("LZO decompression failed\n");
1396 if (unlikely(!data
[thr
].unc_len
||
1397 data
[thr
].unc_len
> LZO_UNC_SIZE
||
1398 data
[thr
].unc_len
& (PAGE_SIZE
- 1))) {
1399 pr_err("Invalid LZO uncompressed length\n");
1405 off
< data
[thr
].unc_len
; off
+= PAGE_SIZE
) {
1406 memcpy(data_of(*snapshot
),
1407 data
[thr
].unc
+ off
, PAGE_SIZE
);
1409 if (!(nr_pages
% m
))
1410 pr_info("Image loading progress: %3d%%\n",
1414 ret
= snapshot_write_next(snapshot
);
1416 crc
->run_threads
= thr
+ 1;
1417 atomic_set(&crc
->ready
, 1);
1424 crc
->run_threads
= thr
;
1425 atomic_set(&crc
->ready
, 1);
1430 if (crc
->run_threads
) {
1431 wait_event(crc
->done
, atomic_read(&crc
->stop
));
1432 atomic_set(&crc
->stop
, 0);
1436 pr_info("Image loading done\n");
1437 snapshot_write_finalize(snapshot
);
1438 if (!snapshot_image_loaded(snapshot
))
1441 if (swsusp_header
->flags
& SF_CRC32_MODE
) {
1442 if(handle
->crc32
!= swsusp_header
->crc32
) {
1443 pr_err("Invalid image CRC32!\n");
1449 swsusp_show_speed(start
, stop
, nr_to_read
, "Read");
1451 for (i
= 0; i
< ring_size
; i
++)
1452 free_page((unsigned long)page
[i
]);
1455 kthread_stop(crc
->thr
);
1459 for (thr
= 0; thr
< nr_threads
; thr
++)
1461 kthread_stop(data
[thr
].thr
);
1470 * swsusp_read - read the hibernation image.
1471 * @flags_p: flags passed by the "frozen" kernel in the image header should
1472 * be written into this memory location
1475 int swsusp_read(unsigned int *flags_p
)
1478 struct swap_map_handle handle
;
1479 struct snapshot_handle snapshot
;
1480 struct swsusp_info
*header
;
1482 memset(&snapshot
, 0, sizeof(struct snapshot_handle
));
1483 error
= snapshot_write_next(&snapshot
);
1484 if (error
< (int)PAGE_SIZE
)
1485 return error
< 0 ? error
: -EFAULT
;
1486 header
= (struct swsusp_info
*)data_of(snapshot
);
1487 error
= get_swap_reader(&handle
, flags_p
);
1491 error
= swap_read_page(&handle
, header
, NULL
);
1493 error
= (*flags_p
& SF_NOCOMPRESS_MODE
) ?
1494 load_image(&handle
, &snapshot
, header
->pages
- 1) :
1495 load_image_lzo(&handle
, &snapshot
, header
->pages
- 1);
1497 swap_reader_finish(&handle
);
1500 pr_debug("Image successfully loaded\n");
1502 pr_debug("Error %d resuming\n", error
);
1507 * swsusp_check - Check for swsusp signature in the resume device
1510 int swsusp_check(void)
1514 hib_resume_bdev
= blkdev_get_by_dev(swsusp_resume_device
,
1516 if (!IS_ERR(hib_resume_bdev
)) {
1517 set_blocksize(hib_resume_bdev
, PAGE_SIZE
);
1518 clear_page(swsusp_header
);
1519 error
= hib_submit_io(REQ_OP_READ
, 0,
1520 swsusp_resume_block
,
1521 swsusp_header
, NULL
);
1525 if (!memcmp(HIBERNATE_SIG
, swsusp_header
->sig
, 10)) {
1526 memcpy(swsusp_header
->sig
, swsusp_header
->orig_sig
, 10);
1527 /* Reset swap signature now */
1528 error
= hib_submit_io(REQ_OP_WRITE
, REQ_SYNC
,
1529 swsusp_resume_block
,
1530 swsusp_header
, NULL
);
1537 blkdev_put(hib_resume_bdev
, FMODE_READ
);
1539 pr_debug("Image signature found, resuming\n");
1541 error
= PTR_ERR(hib_resume_bdev
);
1545 pr_debug("Image not found (code %d)\n", error
);
1551 * swsusp_close - close swap device.
1554 void swsusp_close(fmode_t mode
)
1556 if (IS_ERR(hib_resume_bdev
)) {
1557 pr_debug("Image device not initialised\n");
1561 blkdev_put(hib_resume_bdev
, mode
);
1565 * swsusp_unmark - Unmark swsusp signature in the resume device
1568 #ifdef CONFIG_SUSPEND
1569 int swsusp_unmark(void)
1573 hib_submit_io(REQ_OP_READ
, 0, swsusp_resume_block
,
1574 swsusp_header
, NULL
);
1575 if (!memcmp(HIBERNATE_SIG
,swsusp_header
->sig
, 10)) {
1576 memcpy(swsusp_header
->sig
,swsusp_header
->orig_sig
, 10);
1577 error
= hib_submit_io(REQ_OP_WRITE
, REQ_SYNC
,
1578 swsusp_resume_block
,
1579 swsusp_header
, NULL
);
1581 pr_err("Cannot find swsusp signature!\n");
1586 * We just returned from suspend, we don't need the image any more.
1588 free_all_swap_pages(root_swap
);
1594 static int swsusp_header_init(void)
1596 swsusp_header
= (struct swsusp_header
*) __get_free_page(GFP_KERNEL
);
1598 panic("Could not allocate memory for swsusp_header\n");
1602 core_initcall(swsusp_header_init
);