drivers/mmc/host/renesas_sdhi_core.c

   1 /*
   2  * Renesas SDHI
   3  *
   4  * Copyright (C) 2015-17 Renesas Electronics Corporation
   5  * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang
   6  * Copyright (C) 2016-17 Horms Solutions, Simon Horman
   7  * Copyright (C) 2009 Magnus Damm
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  * Based on "Compaq ASIC3 support":
  14  *
  15  * Copyright 2001 Compaq Computer Corporation.
  16  * Copyright 2004-2005 Phil Blundell
  17  * Copyright 2007-2008 OpenedHand Ltd.
  18  *
  19  * Authors: Phil Blundell <pb@handhelds.org>,
  20  *          Samuel Ortiz <sameo@openedhand.com>
  21  *
  22  */
  23
  24 #include <linux/kernel.h>
  25 #include <linux/clk.h>
  26 #include <linux/slab.h>
  27 #include <linux/of_device.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/mmc/host.h>
  30 #include <linux/mfd/tmio.h>
  31 #include <linux/sh_dma.h>
  32 #include <linux/delay.h>
  33 #include <linux/pinctrl/consumer.h>
  34 #include <linux/pinctrl/pinctrl-state.h>
  35 #include <linux/regulator/consumer.h>
  36
  37 #include "renesas_sdhi.h"
  38 #include "tmio_mmc.h"
  39
  40 #define EXT_ACC           0xe4
  41
  42 #define SDHI_VER_GEN2_SDR50     0x490c
  43 #define SDHI_VER_RZ_A1          0x820b
  44 /* very old datasheets said 0x490c for SDR104, too. They are wrong! */
  45 #define SDHI_VER_GEN2_SDR104    0xcb0d
  46 #define SDHI_VER_GEN3_SD        0xcc10
  47 #define SDHI_VER_GEN3_SDMMC     0xcd10
  48
  49 #define host_to_priv(host) \
  50         container_of((host)->pdata, struct renesas_sdhi, mmc_data)
  51
  52 struct renesas_sdhi {
  53         struct clk *clk;
  54         struct clk *clk_cd;
  55         struct tmio_mmc_data mmc_data;
  56         struct tmio_mmc_dma dma_priv;
  57         struct pinctrl *pinctrl;
  58         struct pinctrl_state *pins_default, *pins_uhs;
  59         void __iomem *scc_ctl;
  60 };
  61
  62 static void renesas_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width)
  63 {
  64         u32 val;
  65
  66         /*
  67          * see also
  68          *      renesas_sdhi_of_data :: dma_buswidth
  69          */
  70         switch (sd_ctrl_read16(host, CTL_VERSION)) {
  71         case SDHI_VER_GEN2_SDR50:
  72                 val = (width == 32) ? 0x0001 : 0x0000;
  73                 break;
  74         case SDHI_VER_GEN2_SDR104:
  75                 val = (width == 32) ? 0x0000 : 0x0001;
  76                 break;
  77         case SDHI_VER_GEN3_SD:
  78         case SDHI_VER_GEN3_SDMMC:
  79                 if (width == 64)
  80                         val = 0x0000;
  81                 else if (width == 32)
  82                         val = 0x0101;
  83                 else
  84                         val = 0x0001;
  85                 break;
  86         default:
  87                 /* nothing to do */
  88                 return;
  89         }
  90
  91         sd_ctrl_write16(host, EXT_ACC, val);
  92 }
  93
  94 static int renesas_sdhi_clk_enable(struct tmio_mmc_host *host)
  95 {
  96         struct mmc_host *mmc = host->mmc;
  97         struct renesas_sdhi *priv = host_to_priv(host);
  98         int ret = clk_prepare_enable(priv->clk);
  99
 100         if (ret < 0)
 101                 return ret;
 102
 103         ret = clk_prepare_enable(priv->clk_cd);
 104         if (ret < 0) {
 105                 clk_disable_unprepare(priv->clk);
 106                 return ret;
 107         }
 108
 109         /*
 110          * The clock driver may not know what maximum frequency
 111          * actually works, so it should be set with the max-frequency
 112          * property which will already have been read to f_max.  If it
 113          * was missing, assume the current frequency is the maximum.
 114          */
 115         if (!mmc->f_max)
 116                 mmc->f_max = clk_get_rate(priv->clk);
 117
 118         /*
 119          * Minimum frequency is the minimum input clock frequency
 120          * divided by our maximum divider.
 121          */
 122         mmc->f_min = max(clk_round_rate(priv->clk, 1) / 512, 1L);
 123
 124         /* enable 16bit data access on SDBUF as default */
 125         renesas_sdhi_sdbuf_width(host, 16);
 126
 127         return 0;
 128 }
 129
 130 static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
 131                                             unsigned int new_clock)
 132 {
 133         struct renesas_sdhi *priv = host_to_priv(host);
 134         unsigned int freq, diff, best_freq = 0, diff_min = ~0;
 135         int i, ret;
 136
 137         /* tested only on R-Car Gen2+ currently; may work for others */
 138         if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
 139                 return clk_get_rate(priv->clk);
 140
 141         /*
 142          * We want the bus clock to be as close as possible to, but no
 143          * greater than, new_clock.  As we can divide by 1 << i for
 144          * any i in [0, 9] we want the input clock to be as close as
 145          * possible, but no greater than, new_clock << i.
 146          */
 147         for (i = min(9, ilog2(UINT_MAX / new_clock)); i >= 0; i--) {
 148                 freq = clk_round_rate(priv->clk, new_clock << i);
 149                 if (freq > (new_clock << i)) {
 150                         /* Too fast; look for a slightly slower option */
 151                         freq = clk_round_rate(priv->clk,
 152                                               (new_clock << i) / 4 * 3);
 153                         if (freq > (new_clock << i))
 154                                 continue;
 155                 }
 156
 157                 diff = new_clock - (freq >> i);
 158                 if (diff <= diff_min) {
 159                         best_freq = freq;
 160                         diff_min = diff;
 161                 }
 162         }
 163
 164         ret = clk_set_rate(priv->clk, best_freq);
 165
 166         return ret == 0 ? best_freq : clk_get_rate(priv->clk);
 167 }
 168
 169 static void renesas_sdhi_clk_disable(struct tmio_mmc_host *host)
 170 {
 171         struct renesas_sdhi *priv = host_to_priv(host);
 172
 173         clk_disable_unprepare(priv->clk);
 174         clk_disable_unprepare(priv->clk_cd);
 175 }
 176
 177 static int renesas_sdhi_card_busy(struct mmc_host *mmc)
 178 {
 179         struct tmio_mmc_host *host = mmc_priv(mmc);
 180
 181         return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) &
 182                  TMIO_STAT_DAT0);
 183 }
 184
 185 static int renesas_sdhi_start_signal_voltage_switch(struct mmc_host *mmc,
 186                                                     struct mmc_ios *ios)
 187 {
 188         struct tmio_mmc_host *host = mmc_priv(mmc);
 189         struct renesas_sdhi *priv = host_to_priv(host);
 190         struct pinctrl_state *pin_state;
 191         int ret;
 192
 193         switch (ios->signal_voltage) {
 194         case MMC_SIGNAL_VOLTAGE_330:
 195                 pin_state = priv->pins_default;
 196                 break;
 197         case MMC_SIGNAL_VOLTAGE_180:
 198                 pin_state = priv->pins_uhs;
 199                 break;
 200         default:
 201                 return -EINVAL;
 202         }
 203
 204         /*
 205          * If anything is missing, assume signal voltage is fixed at
 206          * 3.3V and succeed/fail accordingly.
 207          */
 208         if (IS_ERR(priv->pinctrl) || IS_ERR(pin_state))
 209                 return ios->signal_voltage ==
 210                         MMC_SIGNAL_VOLTAGE_330 ? 0 : -EINVAL;
 211
 212         ret = mmc_regulator_set_vqmmc(host->mmc, ios);
 213         if (ret)
 214                 return ret;
 215
 216         return pinctrl_select_state(priv->pinctrl, pin_state);
 217 }
 218
 219 /* SCC registers */
 220 #define SH_MOBILE_SDHI_SCC_DTCNTL       0x000
 221 #define SH_MOBILE_SDHI_SCC_TAPSET       0x002
 222 #define SH_MOBILE_SDHI_SCC_DT2FF        0x004
 223 #define SH_MOBILE_SDHI_SCC_CKSEL        0x006
 224 #define SH_MOBILE_SDHI_SCC_RVSCNTL      0x008
 225 #define SH_MOBILE_SDHI_SCC_RVSREQ       0x00A
 226
 227 /* Definitions for values the SH_MOBILE_SDHI_SCC_DTCNTL register */
 228 #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN         BIT(0)
 229 #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT  16
 230 #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK   0xff
 231
 232 /* Definitions for values the SH_MOBILE_SDHI_SCC_CKSEL register */
 233 #define SH_MOBILE_SDHI_SCC_CKSEL_DTSEL          BIT(0)
 234 /* Definitions for values the SH_MOBILE_SDHI_SCC_RVSCNTL register */
 235 #define SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN        BIT(0)
 236 /* Definitions for values the SH_MOBILE_SDHI_SCC_RVSREQ register */
 237 #define SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR        BIT(2)
 238
 239 static inline u32 sd_scc_read32(struct tmio_mmc_host *host,
 240                                 struct renesas_sdhi *priv, int addr)
 241 {
 242         return readl(priv->scc_ctl + (addr << host->bus_shift));
 243 }
 244
 245 static inline void sd_scc_write32(struct tmio_mmc_host *host,
 246                                   struct renesas_sdhi *priv,
 247                                   int addr, u32 val)
 248 {
 249         writel(val, priv->scc_ctl + (addr << host->bus_shift));
 250 }
 251
 252 static unsigned int renesas_sdhi_init_tuning(struct tmio_mmc_host *host)
 253 {
 254         struct renesas_sdhi *priv;
 255
 256         priv = host_to_priv(host);
 257
 258         /* set sampling clock selection range */
 259         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL,
 260                        0x8 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT);
 261
 262         /* Initialize SCC */
 263         sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, 0x0);
 264
 265         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL,
 266                        SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN |
 267                        sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL));
 268
 269         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
 270                         sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 271
 272         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL,
 273                        SH_MOBILE_SDHI_SCC_CKSEL_DTSEL |
 274                        sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL));
 275
 276         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
 277                         sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 278
 279         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
 280                        ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
 281                        sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
 282
 283         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, host->scc_tappos);
 284
 285         /* Read TAPNUM */
 286         return (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL) >>
 287                 SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) &
 288                 SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK;
 289 }
 290
 291 static void renesas_sdhi_prepare_tuning(struct tmio_mmc_host *host,
 292                                         unsigned long tap)
 293 {
 294         struct renesas_sdhi *priv = host_to_priv(host);
 295
 296         /* Set sampling clock position */
 297         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap);
 298 }
 299
 300 #define SH_MOBILE_SDHI_MAX_TAP 3
 301
 302 static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
 303 {
 304         struct renesas_sdhi *priv = host_to_priv(host);
 305         unsigned long tap_cnt;  /* counter of tuning success */
 306         unsigned long tap_set;  /* tap position */
 307         unsigned long tap_start;/* start position of tuning success */
 308         unsigned long tap_end;  /* end position of tuning success */
 309         unsigned long ntap;     /* temporary counter of tuning success */
 310         unsigned long i;
 311
 312         /* Clear SCC_RVSREQ */
 313         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
 314
 315         /*
 316          * Find the longest consecutive run of successful probes.  If that
 317          * is more than SH_MOBILE_SDHI_MAX_TAP probes long then use the
 318          * center index as the tap.
 319          */
 320         tap_cnt = 0;
 321         ntap = 0;
 322         tap_start = 0;
 323         tap_end = 0;
 324         for (i = 0; i < host->tap_num * 2; i++) {
 325                 if (test_bit(i, host->taps)) {
 326                         ntap++;
 327                 } else {
 328                         if (ntap > tap_cnt) {
 329                                 tap_start = i - ntap;
 330                                 tap_end = i - 1;
 331                                 tap_cnt = ntap;
 332                         }
 333                         ntap = 0;
 334                 }
 335         }
 336
 337         if (ntap > tap_cnt) {
 338                 tap_start = i - ntap;
 339                 tap_end = i - 1;
 340                 tap_cnt = ntap;
 341         }
 342
 343         if (tap_cnt >= SH_MOBILE_SDHI_MAX_TAP)
 344                 tap_set = (tap_start + tap_end) / 2 % host->tap_num;
 345         else
 346                 return -EIO;
 347
 348         /* Set SCC */
 349         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap_set);
 350
 351         /* Enable auto re-tuning */
 352         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
 353                        SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN |
 354                        sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
 355
 356         return 0;
 357 }
 358
 359 static bool renesas_sdhi_check_scc_error(struct tmio_mmc_host *host)
 360 {
 361         struct renesas_sdhi *priv = host_to_priv(host);
 362
 363         /* Check SCC error */
 364         if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL) &
 365             SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &&
 366             sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ) &
 367             SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR) {
 368                 /* Clear SCC error */
 369                 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
 370                 return true;
 371         }
 372
 373         return false;
 374 }
 375
 376 static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host)
 377 {
 378         struct renesas_sdhi *priv;
 379
 380         priv = host_to_priv(host);
 381
 382         /* Reset SCC */
 383         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
 384                         sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 385
 386         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL,
 387                        ~SH_MOBILE_SDHI_SCC_CKSEL_DTSEL &
 388                        sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL));
 389
 390         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
 391                         sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 392
 393         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
 394                        ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
 395                        sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
 396
 397         sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
 398                        ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
 399                        sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
 400 }
 401
 402 static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit)
 403 {
 404         int timeout = 1000;
 405         /* CBSY is set when busy, SCLKDIVEN is cleared when busy */
 406         u32 wait_state = (bit == TMIO_STAT_CMD_BUSY ? TMIO_STAT_CMD_BUSY : 0);
 407
 408         while (--timeout && (sd_ctrl_read16_and_16_as_32(host, CTL_STATUS)
 409                               & bit) == wait_state)
 410                 udelay(1);
 411
 412         if (!timeout) {
 413                 dev_warn(&host->pdev->dev, "timeout waiting for SD bus idle\n");
 414                 return -EBUSY;
 415         }
 416
 417         return 0;
 418 }
 419
 420 static int renesas_sdhi_write16_hook(struct tmio_mmc_host *host, int addr)
 421 {
 422         u32 bit = TMIO_STAT_SCLKDIVEN;
 423
 424         switch (addr) {
 425         case CTL_SD_CMD:
 426         case CTL_STOP_INTERNAL_ACTION:
 427         case CTL_XFER_BLK_COUNT:
 428         case CTL_SD_XFER_LEN:
 429         case CTL_SD_MEM_CARD_OPT:
 430         case CTL_TRANSACTION_CTL:
 431         case CTL_DMA_ENABLE:
 432         case EXT_ACC:
 433                 if (host->pdata->flags & TMIO_MMC_HAVE_CBSY)
 434                         bit = TMIO_STAT_CMD_BUSY;
 435                 /* fallthrough */
 436         case CTL_SD_CARD_CLK_CTL:
 437                 return renesas_sdhi_wait_idle(host, bit);
 438         }
 439
 440         return 0;
 441 }
 442
 443 static int renesas_sdhi_multi_io_quirk(struct mmc_card *card,
 444                                        unsigned int direction, int blk_size)
 445 {
 446         /*
 447          * In Renesas controllers, when performing a
 448          * multiple block read of one or two blocks,
 449          * depending on the timing with which the
 450          * response register is read, the response
 451          * value may not be read properly.
 452          * Use single block read for this HW bug
 453          */
 454         if ((direction == MMC_DATA_READ) &&
 455             blk_size == 2)
 456                 return 1;
 457
 458         return blk_size;
 459 }
 460
 461 static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
 462 {
 463         /* Iff regs are 8 byte apart, sdbuf is 64 bit. Otherwise always 32. */
 464         int width = (host->bus_shift == 2) ? 64 : 32;
 465
 466         sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? DMA_ENABLE_DMASDRW : 0);
 467         renesas_sdhi_sdbuf_width(host, enable ? width : 16);
 468 }
 469
 470 int renesas_sdhi_probe(struct platform_device *pdev,
 471                        const struct tmio_mmc_dma_ops *dma_ops)
 472 {
 473         struct tmio_mmc_data *mmd = pdev->dev.platform_data;
 474         const struct renesas_sdhi_of_data *of_data;
 475         struct tmio_mmc_data *mmc_data;
 476         struct tmio_mmc_dma *dma_priv;
 477         struct tmio_mmc_host *host;
 478         struct renesas_sdhi *priv;
 479         struct resource *res;
 480         int irq, ret, i;
 481
 482         of_data = of_device_get_match_data(&pdev->dev);
 483
 484         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 485         if (!res)
 486                 return -EINVAL;
 487
 488         priv = devm_kzalloc(&pdev->dev, sizeof(struct renesas_sdhi),
 489                             GFP_KERNEL);
 490         if (!priv)
 491                 return -ENOMEM;
 492
 493         mmc_data = &priv->mmc_data;
 494         dma_priv = &priv->dma_priv;
 495
 496         priv->clk = devm_clk_get(&pdev->dev, NULL);
 497         if (IS_ERR(priv->clk)) {
 498                 ret = PTR_ERR(priv->clk);
 499                 dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
 500                 goto eprobe;
 501         }
 502
 503         /*
 504          * Some controllers provide a 2nd clock just to run the internal card
 505          * detection logic. Unfortunately, the existing driver architecture does
 506          * not support a separation of clocks for runtime PM usage. When
 507          * native hotplug is used, the tmio driver assumes that the core
 508          * must continue to run for card detect to stay active, so we cannot
 509          * disable it.
 510          * Additionally, it is prohibited to supply a clock to the core but not
 511          * to the card detect circuit. That leaves us with if separate clocks
 512          * are presented, we must treat them both as virtually 1 clock.
 513          */
 514         priv->clk_cd = devm_clk_get(&pdev->dev, "cd");
 515         if (IS_ERR(priv->clk_cd))
 516                 priv->clk_cd = NULL;
 517
 518         priv->pinctrl = devm_pinctrl_get(&pdev->dev);
 519         if (!IS_ERR(priv->pinctrl)) {
 520                 priv->pins_default = pinctrl_lookup_state(priv->pinctrl,
 521                                                 PINCTRL_STATE_DEFAULT);
 522                 priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl,
 523                                                 "state_uhs");
 524         }
 525
 526         host = tmio_mmc_host_alloc(pdev);
 527         if (!host) {
 528                 ret = -ENOMEM;
 529                 goto eprobe;
 530         }
 531
 532         if (of_data) {
 533                 mmc_data->flags |= of_data->tmio_flags;
 534                 mmc_data->ocr_mask = of_data->tmio_ocr_mask;
 535                 mmc_data->capabilities |= of_data->capabilities;
 536                 mmc_data->capabilities2 |= of_data->capabilities2;
 537                 mmc_data->dma_rx_offset = of_data->dma_rx_offset;
 538                 mmc_data->max_blk_count = of_data->max_blk_count;
 539                 mmc_data->max_segs = of_data->max_segs;
 540                 dma_priv->dma_buswidth = of_data->dma_buswidth;
 541                 host->bus_shift = of_data->bus_shift;
 542         }
 543
 544         host->dma               = dma_priv;
 545         host->write16_hook      = renesas_sdhi_write16_hook;
 546         host->clk_enable        = renesas_sdhi_clk_enable;
 547         host->clk_update        = renesas_sdhi_clk_update;
 548         host->clk_disable       = renesas_sdhi_clk_disable;
 549         host->multi_io_quirk    = renesas_sdhi_multi_io_quirk;
 550
 551         /* SDR speeds are only available on Gen2+ */
 552         if (mmc_data->flags & TMIO_MMC_MIN_RCAR2) {
 553                 /* card_busy caused issues on r8a73a4 (pre-Gen2) CD-less SDHI */
 554                 host->card_busy = renesas_sdhi_card_busy;
 555                 host->start_signal_voltage_switch =
 556                         renesas_sdhi_start_signal_voltage_switch;
 557         }
 558
 559         /* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
 560         if (!host->bus_shift && resource_size(res) > 0x100) /* old way to determine the shift */
 561                 host->bus_shift = 1;
 562
 563         if (mmd)
 564                 *mmc_data = *mmd;
 565
 566         dma_priv->filter = shdma_chan_filter;
 567         dma_priv->enable = renesas_sdhi_enable_dma;
 568
 569         mmc_data->alignment_shift = 1; /* 2-byte alignment */
 570         mmc_data->capabilities |= MMC_CAP_MMC_HIGHSPEED;
 571
 572         /*
 573          * All SDHI blocks support 2-byte and larger block sizes in 4-bit
 574          * bus width mode.
 575          */
 576         mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES;
 577
 578         /*
 579          * All SDHI blocks support SDIO IRQ signalling.
 580          */
 581         mmc_data->flags |= TMIO_MMC_SDIO_IRQ;
 582
 583         /* All SDHI have CMD12 control bit */
 584         mmc_data->flags |= TMIO_MMC_HAVE_CMD12_CTRL;
 585
 586         /* All SDHI have SDIO status bits which must be 1 */
 587         mmc_data->flags |= TMIO_MMC_SDIO_STATUS_SETBITS;
 588
 589         ret = tmio_mmc_host_probe(host, mmc_data, dma_ops);
 590         if (ret < 0)
 591                 goto efree;
 592
 593         /* One Gen2 SDHI incarnation does NOT have a CBSY bit */
 594         if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN2_SDR50)
 595                 mmc_data->flags &= ~TMIO_MMC_HAVE_CBSY;
 596
 597         /* Enable tuning iff we have an SCC and a supported mode */
 598         if (of_data && of_data->scc_offset &&
 599             (host->mmc->caps & MMC_CAP_UHS_SDR104 ||
 600              host->mmc->caps2 & MMC_CAP2_HS200_1_8V_SDR)) {
 601                 const struct renesas_sdhi_scc *taps = of_data->taps;
 602                 bool hit = false;
 603
 604                 host->mmc->caps |= MMC_CAP_HW_RESET;
 605
 606                 for (i = 0; i < of_data->taps_num; i++) {
 607                         if (taps[i].clk_rate == 0 ||
 608                             taps[i].clk_rate == host->mmc->f_max) {
 609                                 host->scc_tappos = taps->tap;
 610                                 hit = true;
 611                                 break;
 612                         }
 613                 }
 614
 615                 if (!hit)
 616                         dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n");
 617
 618                 priv->scc_ctl = host->ctl + of_data->scc_offset;
 619                 host->init_tuning = renesas_sdhi_init_tuning;
 620                 host->prepare_tuning = renesas_sdhi_prepare_tuning;
 621                 host->select_tuning = renesas_sdhi_select_tuning;
 622                 host->check_scc_error = renesas_sdhi_check_scc_error;
 623                 host->hw_reset = renesas_sdhi_hw_reset;
 624         }
 625
 626         i = 0;
 627         while (1) {
 628                 irq = platform_get_irq(pdev, i);
 629                 if (irq < 0)
 630                         break;
 631                 i++;
 632                 ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0,
 633                                        dev_name(&pdev->dev), host);
 634                 if (ret)
 635                         goto eirq;
 636         }
 637
 638         /* There must be at least one IRQ source */
 639         if (!i) {
 640                 ret = irq;
 641                 goto eirq;
 642         }
 643
 644         dev_info(&pdev->dev, "%s base at 0x%08lx max clock rate %u MHz\n",
 645                  mmc_hostname(host->mmc), (unsigned long)
 646                  (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start),
 647                  host->mmc->f_max / 1000000);
 648
 649         return ret;
 650
 651 eirq:
 652         tmio_mmc_host_remove(host);
 653 efree:
 654         tmio_mmc_host_free(host);
 655 eprobe:
 656         return ret;
 657 }
 658 EXPORT_SYMBOL_GPL(renesas_sdhi_probe);
 659
 660 int renesas_sdhi_remove(struct platform_device *pdev)
 661 {
 662         struct mmc_host *mmc = platform_get_drvdata(pdev);
 663         struct tmio_mmc_host *host = mmc_priv(mmc);
 664
 665         tmio_mmc_host_remove(host);
 666
 667         return 0;
 668 }
 669 EXPORT_SYMBOL_GPL(renesas_sdhi_remove);