perf kmem: use ARRAY_SIZE instead of reinventing it
[linux/fpc-iii.git] / drivers / extcon / extcon-max77693.c
blob8c17b65eb74d7d34077479a4726cec30ce68fccd
1 /*
2 * extcon-max77693.c - MAX77693 extcon driver to support MAX77693 MUIC
4 * Copyright (C) 2012 Samsung Electrnoics
5 * Chanwoo Choi <cw00.choi@samsung.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/i2c.h>
21 #include <linux/slab.h>
22 #include <linux/interrupt.h>
23 #include <linux/err.h>
24 #include <linux/platform_device.h>
25 #include <linux/mfd/max77693.h>
26 #include <linux/mfd/max77693-private.h>
27 #include <linux/extcon.h>
28 #include <linux/regmap.h>
29 #include <linux/irqdomain.h>
31 #define DEV_NAME "max77693-muic"
33 /* MAX77693 MUIC - STATUS1~3 Register */
34 #define STATUS1_ADC_SHIFT (0)
35 #define STATUS1_ADCLOW_SHIFT (5)
36 #define STATUS1_ADCERR_SHIFT (6)
37 #define STATUS1_ADC1K_SHIFT (7)
38 #define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
39 #define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT)
40 #define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT)
41 #define STATUS1_ADC1K_MASK (0x1 << STATUS1_ADC1K_SHIFT)
43 #define STATUS2_CHGTYP_SHIFT (0)
44 #define STATUS2_CHGDETRUN_SHIFT (3)
45 #define STATUS2_DCDTMR_SHIFT (4)
46 #define STATUS2_DXOVP_SHIFT (5)
47 #define STATUS2_VBVOLT_SHIFT (6)
48 #define STATUS2_VIDRM_SHIFT (7)
49 #define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
50 #define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT)
51 #define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT)
52 #define STATUS2_DXOVP_MASK (0x1 << STATUS2_DXOVP_SHIFT)
53 #define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT)
54 #define STATUS2_VIDRM_MASK (0x1 << STATUS2_VIDRM_SHIFT)
56 #define STATUS3_OVP_SHIFT (2)
57 #define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT)
59 /* MAX77693 CDETCTRL1~2 register */
60 #define CDETCTRL1_CHGDETEN_SHIFT (0)
61 #define CDETCTRL1_CHGTYPMAN_SHIFT (1)
62 #define CDETCTRL1_DCDEN_SHIFT (2)
63 #define CDETCTRL1_DCD2SCT_SHIFT (3)
64 #define CDETCTRL1_CDDELAY_SHIFT (4)
65 #define CDETCTRL1_DCDCPL_SHIFT (5)
66 #define CDETCTRL1_CDPDET_SHIFT (7)
67 #define CDETCTRL1_CHGDETEN_MASK (0x1 << CDETCTRL1_CHGDETEN_SHIFT)
68 #define CDETCTRL1_CHGTYPMAN_MASK (0x1 << CDETCTRL1_CHGTYPMAN_SHIFT)
69 #define CDETCTRL1_DCDEN_MASK (0x1 << CDETCTRL1_DCDEN_SHIFT)
70 #define CDETCTRL1_DCD2SCT_MASK (0x1 << CDETCTRL1_DCD2SCT_SHIFT)
71 #define CDETCTRL1_CDDELAY_MASK (0x1 << CDETCTRL1_CDDELAY_SHIFT)
72 #define CDETCTRL1_DCDCPL_MASK (0x1 << CDETCTRL1_DCDCPL_SHIFT)
73 #define CDETCTRL1_CDPDET_MASK (0x1 << CDETCTRL1_CDPDET_SHIFT)
75 #define CDETCTRL2_VIDRMEN_SHIFT (1)
76 #define CDETCTRL2_DXOVPEN_SHIFT (3)
77 #define CDETCTRL2_VIDRMEN_MASK (0x1 << CDETCTRL2_VIDRMEN_SHIFT)
78 #define CDETCTRL2_DXOVPEN_MASK (0x1 << CDETCTRL2_DXOVPEN_SHIFT)
80 /* MAX77693 MUIC - CONTROL1~3 register */
81 #define COMN1SW_SHIFT (0)
82 #define COMP2SW_SHIFT (3)
83 #define COMN1SW_MASK (0x7 << COMN1SW_SHIFT)
84 #define COMP2SW_MASK (0x7 << COMP2SW_SHIFT)
85 #define COMP_SW_MASK (COMP2SW_MASK | COMN1SW_MASK)
86 #define CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \
87 | (1 << COMN1SW_SHIFT))
88 #define CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \
89 | (2 << COMN1SW_SHIFT))
90 #define CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \
91 | (3 << COMN1SW_SHIFT))
92 #define CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \
93 | (0 << COMN1SW_SHIFT))
95 #define CONTROL2_LOWPWR_SHIFT (0)
96 #define CONTROL2_ADCEN_SHIFT (1)
97 #define CONTROL2_CPEN_SHIFT (2)
98 #define CONTROL2_SFOUTASRT_SHIFT (3)
99 #define CONTROL2_SFOUTORD_SHIFT (4)
100 #define CONTROL2_ACCDET_SHIFT (5)
101 #define CONTROL2_USBCPINT_SHIFT (6)
102 #define CONTROL2_RCPS_SHIFT (7)
103 #define CONTROL2_LOWPWR_MASK (0x1 << CONTROL2_LOWPWR_SHIFT)
104 #define CONTROL2_ADCEN_MASK (0x1 << CONTROL2_ADCEN_SHIFT)
105 #define CONTROL2_CPEN_MASK (0x1 << CONTROL2_CPEN_SHIFT)
106 #define CONTROL2_SFOUTASRT_MASK (0x1 << CONTROL2_SFOUTASRT_SHIFT)
107 #define CONTROL2_SFOUTORD_MASK (0x1 << CONTROL2_SFOUTORD_SHIFT)
108 #define CONTROL2_ACCDET_MASK (0x1 << CONTROL2_ACCDET_SHIFT)
109 #define CONTROL2_USBCPINT_MASK (0x1 << CONTROL2_USBCPINT_SHIFT)
110 #define CONTROL2_RCPS_MASK (0x1 << CONTROL2_RCPS_SHIFT)
112 #define CONTROL3_JIGSET_SHIFT (0)
113 #define CONTROL3_BTLDSET_SHIFT (2)
114 #define CONTROL3_ADCDBSET_SHIFT (4)
115 #define CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
116 #define CONTROL3_BTLDSET_MASK (0x3 << CONTROL3_BTLDSET_SHIFT)
117 #define CONTROL3_ADCDBSET_MASK (0x3 << CONTROL3_ADCDBSET_SHIFT)
119 enum max77693_muic_adc_debounce_time {
120 ADC_DEBOUNCE_TIME_5MS = 0,
121 ADC_DEBOUNCE_TIME_10MS,
122 ADC_DEBOUNCE_TIME_25MS,
123 ADC_DEBOUNCE_TIME_38_62MS,
126 struct max77693_muic_info {
127 struct device *dev;
128 struct max77693_dev *max77693;
129 struct extcon_dev *edev;
130 int prev_adc;
131 int prev_adc_gnd;
132 int prev_chg_type;
133 u8 status[2];
135 int irq;
136 struct work_struct irq_work;
137 struct mutex mutex;
140 enum max77693_muic_charger_type {
141 MAX77693_CHARGER_TYPE_NONE = 0,
142 MAX77693_CHARGER_TYPE_USB,
143 MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT,
144 MAX77693_CHARGER_TYPE_DEDICATED_CHG,
145 MAX77693_CHARGER_TYPE_APPLE_500MA,
146 MAX77693_CHARGER_TYPE_APPLE_1A_2A,
147 MAX77693_CHARGER_TYPE_DEAD_BATTERY = 7,
151 * struct max77693_muic_irq
152 * @irq: the index of irq list of MUIC device.
153 * @name: the name of irq.
154 * @virq: the virtual irq to use irq domain
156 struct max77693_muic_irq {
157 unsigned int irq;
158 const char *name;
159 unsigned int virq;
162 static struct max77693_muic_irq muic_irqs[] = {
163 { MAX77693_MUIC_IRQ_INT1_ADC, "muic-ADC" },
164 { MAX77693_MUIC_IRQ_INT1_ADC_LOW, "muic-ADCLOW" },
165 { MAX77693_MUIC_IRQ_INT1_ADC_ERR, "muic-ADCError" },
166 { MAX77693_MUIC_IRQ_INT1_ADC1K, "muic-ADC1K" },
167 { MAX77693_MUIC_IRQ_INT2_CHGTYP, "muic-CHGTYP" },
168 { MAX77693_MUIC_IRQ_INT2_CHGDETREUN, "muic-CHGDETREUN" },
169 { MAX77693_MUIC_IRQ_INT2_DCDTMR, "muic-DCDTMR" },
170 { MAX77693_MUIC_IRQ_INT2_DXOVP, "muic-DXOVP" },
171 { MAX77693_MUIC_IRQ_INT2_VBVOLT, "muic-VBVOLT" },
172 { MAX77693_MUIC_IRQ_INT2_VIDRM, "muic-VIDRM" },
173 { MAX77693_MUIC_IRQ_INT3_EOC, "muic-EOC" },
174 { MAX77693_MUIC_IRQ_INT3_CGMBC, "muic-CGMBC" },
175 { MAX77693_MUIC_IRQ_INT3_OVP, "muic-OVP" },
176 { MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR, "muic-MBCCHG_ERR" },
177 { MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, "muic-CHG_ENABLED" },
178 { MAX77693_MUIC_IRQ_INT3_BAT_DET, "muic-BAT_DET" },
181 /* Define supported accessory type */
182 enum max77693_muic_acc_type {
183 MAX77693_MUIC_ADC_GROUND = 0x0,
184 MAX77693_MUIC_ADC_SEND_END_BUTTON,
185 MAX77693_MUIC_ADC_REMOTE_S1_BUTTON,
186 MAX77693_MUIC_ADC_REMOTE_S2_BUTTON,
187 MAX77693_MUIC_ADC_REMOTE_S3_BUTTON,
188 MAX77693_MUIC_ADC_REMOTE_S4_BUTTON,
189 MAX77693_MUIC_ADC_REMOTE_S5_BUTTON,
190 MAX77693_MUIC_ADC_REMOTE_S6_BUTTON,
191 MAX77693_MUIC_ADC_REMOTE_S7_BUTTON,
192 MAX77693_MUIC_ADC_REMOTE_S8_BUTTON,
193 MAX77693_MUIC_ADC_REMOTE_S9_BUTTON,
194 MAX77693_MUIC_ADC_REMOTE_S10_BUTTON,
195 MAX77693_MUIC_ADC_REMOTE_S11_BUTTON,
196 MAX77693_MUIC_ADC_REMOTE_S12_BUTTON,
197 MAX77693_MUIC_ADC_RESERVED_ACC_1,
198 MAX77693_MUIC_ADC_RESERVED_ACC_2,
199 MAX77693_MUIC_ADC_RESERVED_ACC_3,
200 MAX77693_MUIC_ADC_RESERVED_ACC_4,
201 MAX77693_MUIC_ADC_RESERVED_ACC_5,
202 MAX77693_MUIC_ADC_CEA936_AUDIO,
203 MAX77693_MUIC_ADC_PHONE_POWERED_DEV,
204 MAX77693_MUIC_ADC_TTY_CONVERTER,
205 MAX77693_MUIC_ADC_UART_CABLE,
206 MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG,
207 MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF,
208 MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON,
209 MAX77693_MUIC_ADC_AV_CABLE_NOLOAD,
210 MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG,
211 MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF,
212 MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON,
213 MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE,
214 MAX77693_MUIC_ADC_OPEN,
216 /* The below accessories have same ADC value so ADCLow and
217 ADC1K bit is used to separate specific accessory */
218 MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, ADCLow:0, ADC1K:0 */
219 MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, ADCLow:1, ADC1K:0 */
220 MAX77693_MUIC_GND_MHL_CABLE = 0x103, /* ADC:0x0, ADCLow:1, ADC1K:1 */
223 /* MAX77693 MUIC device support below list of accessories(external connector) */
224 const char *max77693_extcon_cable[] = {
225 [0] = "USB",
226 [1] = "USB-Host",
227 [2] = "TA",
228 [3] = "Fast-charger",
229 [4] = "Slow-charger",
230 [5] = "Charge-downstream",
231 [6] = "MHL",
232 [7] = "Audio-video-load",
233 [8] = "Audio-video-noload",
234 [9] = "JIG",
236 NULL,
239 static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
240 enum max77693_muic_adc_debounce_time time)
242 int ret;
244 switch (time) {
245 case ADC_DEBOUNCE_TIME_5MS:
246 case ADC_DEBOUNCE_TIME_10MS:
247 case ADC_DEBOUNCE_TIME_25MS:
248 case ADC_DEBOUNCE_TIME_38_62MS:
249 ret = max77693_update_reg(info->max77693->regmap_muic,
250 MAX77693_MUIC_REG_CTRL3,
251 time << CONTROL3_ADCDBSET_SHIFT,
252 CONTROL3_ADCDBSET_MASK);
253 if (ret)
254 dev_err(info->dev, "failed to set ADC debounce time\n");
255 break;
256 default:
257 dev_err(info->dev, "invalid ADC debounce time\n");
258 ret = -EINVAL;
259 break;
262 return ret;
265 static int max77693_muic_set_path(struct max77693_muic_info *info,
266 u8 val, bool attached)
268 int ret = 0;
269 u8 ctrl1, ctrl2 = 0;
271 if (attached)
272 ctrl1 = val;
273 else
274 ctrl1 = CONTROL1_SW_OPEN;
276 ret = max77693_update_reg(info->max77693->regmap_muic,
277 MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK);
278 if (ret < 0) {
279 dev_err(info->dev, "failed to update MUIC register\n");
280 goto out;
283 if (attached)
284 ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
285 else
286 ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
288 ret = max77693_update_reg(info->max77693->regmap_muic,
289 MAX77693_MUIC_REG_CTRL2, ctrl2,
290 CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
291 if (ret < 0) {
292 dev_err(info->dev, "failed to update MUIC register\n");
293 goto out;
296 dev_info(info->dev,
297 "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
298 ctrl1, ctrl2, attached ? "attached" : "detached");
299 out:
300 return ret;
303 static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info,
304 bool attached)
306 int ret = 0;
307 int type;
308 int adc, adc1k, adclow;
310 if (attached) {
311 adc = info->status[0] & STATUS1_ADC_MASK;
312 adclow = info->status[0] & STATUS1_ADCLOW_MASK;
313 adclow >>= STATUS1_ADCLOW_SHIFT;
314 adc1k = info->status[0] & STATUS1_ADC1K_MASK;
315 adc1k >>= STATUS1_ADC1K_SHIFT;
318 * [0x1][ADCLow][ADC1K]
319 * [0x1 0 0 ] : USB_OTG
320 * [0x1 1 0 ] : Audio Video Cable with load
321 * [0x1 1 1 ] : MHL
323 type = ((0x1 << 8) | (adclow << 1) | adc1k);
325 /* Store previous ADC value to handle accessory
326 when accessory will be detached */
327 info->prev_adc = adc;
328 info->prev_adc_gnd = type;
329 } else
330 type = info->prev_adc_gnd;
332 switch (type) {
333 case MAX77693_MUIC_GND_USB_OTG:
334 /* USB_OTG */
335 ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
336 if (ret < 0)
337 goto out;
338 extcon_set_cable_state(info->edev, "USB-Host", attached);
339 break;
340 case MAX77693_MUIC_GND_AV_CABLE_LOAD:
341 /* Audio Video Cable with load */
342 ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
343 if (ret < 0)
344 goto out;
345 extcon_set_cable_state(info->edev,
346 "Audio-video-load", attached);
347 break;
348 case MAX77693_MUIC_GND_MHL_CABLE:
349 /* MHL */
350 extcon_set_cable_state(info->edev, "MHL", attached);
351 break;
352 default:
353 dev_err(info->dev, "failed to detect %s accessory\n",
354 attached ? "attached" : "detached");
355 dev_err(info->dev, "- adc:0x%x, adclow:0x%x, adc1k:0x%x\n",
356 adc, adclow, adc1k);
357 ret = -EINVAL;
358 break;
361 out:
362 return ret;
365 static int max77693_muic_adc_handler(struct max77693_muic_info *info,
366 int curr_adc, bool attached)
368 int ret = 0;
369 int adc;
371 if (attached) {
372 /* Store ADC value to handle accessory
373 when accessory will be detached */
374 info->prev_adc = curr_adc;
375 adc = curr_adc;
376 } else
377 adc = info->prev_adc;
379 dev_info(info->dev,
380 "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
381 attached ? "attached" : "detached", curr_adc, info->prev_adc);
383 switch (adc) {
384 case MAX77693_MUIC_ADC_GROUND:
385 /* USB_OTG/MHL/Audio */
386 max77693_muic_adc_ground_handler(info, attached);
387 break;
388 case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
389 case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:
390 /* USB */
391 ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
392 if (ret < 0)
393 goto out;
394 extcon_set_cable_state(info->edev, "USB", attached);
395 break;
396 case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:
397 case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:
398 /* JIG */
399 ret = max77693_muic_set_path(info, CONTROL1_SW_UART, attached);
400 if (ret < 0)
401 goto out;
402 extcon_set_cable_state(info->edev, "JIG", attached);
403 break;
404 case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:
405 /* Audio Video cable with no-load */
406 ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
407 if (ret < 0)
408 goto out;
409 extcon_set_cable_state(info->edev,
410 "Audio-video-noload", attached);
411 break;
412 case MAX77693_MUIC_ADC_SEND_END_BUTTON:
413 case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON:
414 case MAX77693_MUIC_ADC_REMOTE_S2_BUTTON:
415 case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON:
416 case MAX77693_MUIC_ADC_REMOTE_S4_BUTTON:
417 case MAX77693_MUIC_ADC_REMOTE_S5_BUTTON:
418 case MAX77693_MUIC_ADC_REMOTE_S6_BUTTON:
419 case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON:
420 case MAX77693_MUIC_ADC_REMOTE_S8_BUTTON:
421 case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:
422 case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:
423 case MAX77693_MUIC_ADC_REMOTE_S11_BUTTON:
424 case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON:
425 case MAX77693_MUIC_ADC_RESERVED_ACC_1:
426 case MAX77693_MUIC_ADC_RESERVED_ACC_2:
427 case MAX77693_MUIC_ADC_RESERVED_ACC_3:
428 case MAX77693_MUIC_ADC_RESERVED_ACC_4:
429 case MAX77693_MUIC_ADC_RESERVED_ACC_5:
430 case MAX77693_MUIC_ADC_CEA936_AUDIO:
431 case MAX77693_MUIC_ADC_PHONE_POWERED_DEV:
432 case MAX77693_MUIC_ADC_TTY_CONVERTER:
433 case MAX77693_MUIC_ADC_UART_CABLE:
434 case MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG:
435 case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:
436 case MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG:
437 /* This accessory isn't used in general case if it is specially
438 needed to detect additional accessory, should implement
439 proper operation when this accessory is attached/detached. */
440 dev_info(info->dev,
441 "accessory is %s but it isn't used (adc:0x%x)\n",
442 attached ? "attached" : "detached", adc);
443 goto out;
444 default:
445 dev_err(info->dev,
446 "failed to detect %s accessory (adc:0x%x)\n",
447 attached ? "attached" : "detached", adc);
448 ret = -EINVAL;
449 goto out;
452 out:
453 return ret;
456 static int max77693_muic_chg_handler(struct max77693_muic_info *info,
457 int curr_chg_type, bool attached)
459 int ret = 0;
460 int chg_type;
462 if (attached) {
463 /* Store previous charger type to control
464 when charger accessory will be detached */
465 info->prev_chg_type = curr_chg_type;
466 chg_type = curr_chg_type;
467 } else
468 chg_type = info->prev_chg_type;
470 dev_info(info->dev,
471 "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
472 attached ? "attached" : "detached",
473 curr_chg_type, info->prev_chg_type);
475 switch (chg_type) {
476 case MAX77693_CHARGER_TYPE_USB:
477 ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
478 if (ret < 0)
479 goto out;
480 extcon_set_cable_state(info->edev, "USB", attached);
481 break;
482 case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
483 extcon_set_cable_state(info->edev,
484 "Charge-downstream", attached);
485 break;
486 case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
487 extcon_set_cable_state(info->edev, "TA", attached);
488 break;
489 case MAX77693_CHARGER_TYPE_APPLE_500MA:
490 extcon_set_cable_state(info->edev, "Slow-charger", attached);
491 break;
492 case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
493 extcon_set_cable_state(info->edev, "Fast-charger", attached);
494 break;
495 case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
496 break;
497 default:
498 dev_err(info->dev,
499 "failed to detect %s accessory (chg_type:0x%x)\n",
500 attached ? "attached" : "detached", chg_type);
501 ret = -EINVAL;
502 goto out;
505 out:
506 return ret;
509 static void max77693_muic_irq_work(struct work_struct *work)
511 struct max77693_muic_info *info = container_of(work,
512 struct max77693_muic_info, irq_work);
513 int curr_adc, curr_chg_type;
514 int irq_type = -1;
515 int i, ret = 0;
516 bool attached = true;
518 if (!info->edev)
519 return;
521 mutex_lock(&info->mutex);
523 for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++)
524 if (info->irq == muic_irqs[i].virq)
525 irq_type = muic_irqs[i].irq;
527 ret = max77693_bulk_read(info->max77693->regmap_muic,
528 MAX77693_MUIC_REG_STATUS1, 2, info->status);
529 if (ret) {
530 dev_err(info->dev, "failed to read MUIC register\n");
531 mutex_unlock(&info->mutex);
532 return;
535 switch (irq_type) {
536 case MAX77693_MUIC_IRQ_INT1_ADC:
537 case MAX77693_MUIC_IRQ_INT1_ADC_LOW:
538 case MAX77693_MUIC_IRQ_INT1_ADC_ERR:
539 case MAX77693_MUIC_IRQ_INT1_ADC1K:
540 /* Handle all of accessory except for
541 type of charger accessory */
542 curr_adc = info->status[0] & STATUS1_ADC_MASK;
543 curr_adc >>= STATUS1_ADC_SHIFT;
545 /* Check accessory state which is either detached or attached */
546 if (curr_adc == MAX77693_MUIC_ADC_OPEN)
547 attached = false;
549 ret = max77693_muic_adc_handler(info, curr_adc, attached);
550 break;
551 case MAX77693_MUIC_IRQ_INT2_CHGTYP:
552 case MAX77693_MUIC_IRQ_INT2_CHGDETREUN:
553 case MAX77693_MUIC_IRQ_INT2_DCDTMR:
554 case MAX77693_MUIC_IRQ_INT2_DXOVP:
555 case MAX77693_MUIC_IRQ_INT2_VBVOLT:
556 case MAX77693_MUIC_IRQ_INT2_VIDRM:
557 /* Handle charger accessory */
558 curr_chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
559 curr_chg_type >>= STATUS2_CHGTYP_SHIFT;
561 /* Check charger accessory state which
562 is either detached or attached */
563 if (curr_chg_type == MAX77693_CHARGER_TYPE_NONE)
564 attached = false;
566 ret = max77693_muic_chg_handler(info, curr_chg_type, attached);
567 break;
568 case MAX77693_MUIC_IRQ_INT3_EOC:
569 case MAX77693_MUIC_IRQ_INT3_CGMBC:
570 case MAX77693_MUIC_IRQ_INT3_OVP:
571 case MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR:
572 case MAX77693_MUIC_IRQ_INT3_CHG_ENABLED:
573 case MAX77693_MUIC_IRQ_INT3_BAT_DET:
574 break;
575 default:
576 dev_err(info->dev, "muic interrupt: irq %d occurred\n",
577 irq_type);
578 break;
581 if (ret < 0)
582 dev_err(info->dev, "failed to handle MUIC interrupt\n");
584 mutex_unlock(&info->mutex);
586 return;
589 static irqreturn_t max77693_muic_irq_handler(int irq, void *data)
591 struct max77693_muic_info *info = data;
593 info->irq = irq;
594 schedule_work(&info->irq_work);
596 return IRQ_HANDLED;
599 static struct regmap_config max77693_muic_regmap_config = {
600 .reg_bits = 8,
601 .val_bits = 8,
604 static int max77693_muic_detect_accessory(struct max77693_muic_info *info)
606 int ret = 0;
607 int adc, chg_type;
609 mutex_lock(&info->mutex);
611 /* Read STATUSx register to detect accessory */
612 ret = max77693_bulk_read(info->max77693->regmap_muic,
613 MAX77693_MUIC_REG_STATUS1, 2, info->status);
614 if (ret) {
615 dev_err(info->dev, "failed to read MUIC register\n");
616 mutex_unlock(&info->mutex);
617 return -EINVAL;
620 adc = info->status[0] & STATUS1_ADC_MASK;
621 adc >>= STATUS1_ADC_SHIFT;
623 if (adc != MAX77693_MUIC_ADC_OPEN) {
624 dev_info(info->dev,
625 "external connector is attached (adc:0x%02x)\n", adc);
627 ret = max77693_muic_adc_handler(info, adc, true);
628 if (ret < 0)
629 dev_err(info->dev, "failed to detect accessory\n");
630 goto out;
633 chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
634 chg_type >>= STATUS2_CHGTYP_SHIFT;
636 if (chg_type != MAX77693_CHARGER_TYPE_NONE) {
637 dev_info(info->dev,
638 "external connector is attached (chg_type:0x%x)\n",
639 chg_type);
641 max77693_muic_chg_handler(info, chg_type, true);
642 if (ret < 0)
643 dev_err(info->dev, "failed to detect charger accessory\n");
646 out:
647 mutex_unlock(&info->mutex);
648 return ret;
651 static int max77693_muic_probe(struct platform_device *pdev)
653 struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
654 struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
655 struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
656 struct max77693_muic_info *info;
657 int ret, i;
658 u8 id;
660 info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info),
661 GFP_KERNEL);
662 if (!info) {
663 dev_err(&pdev->dev, "failed to allocate memory\n");
664 return -ENOMEM;
666 info->dev = &pdev->dev;
667 info->max77693 = max77693;
668 if (info->max77693->regmap_muic) {
669 dev_dbg(&pdev->dev, "allocate register map\n");
670 } else {
671 info->max77693->regmap_muic = devm_regmap_init_i2c(
672 info->max77693->muic,
673 &max77693_muic_regmap_config);
674 if (IS_ERR(info->max77693->regmap_muic)) {
675 ret = PTR_ERR(info->max77693->regmap_muic);
676 dev_err(max77693->dev,
677 "failed to allocate register map: %d\n", ret);
678 return ret;
681 platform_set_drvdata(pdev, info);
682 mutex_init(&info->mutex);
684 INIT_WORK(&info->irq_work, max77693_muic_irq_work);
686 /* Support irq domain for MAX77693 MUIC device */
687 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
688 struct max77693_muic_irq *muic_irq = &muic_irqs[i];
689 unsigned int virq = 0;
691 virq = irq_create_mapping(max77693->irq_domain, muic_irq->irq);
692 if (!virq) {
693 ret = -EINVAL;
694 goto err_irq;
696 muic_irq->virq = virq;
698 ret = request_threaded_irq(virq, NULL,
699 max77693_muic_irq_handler,
700 IRQF_ONESHOT, muic_irq->name, info);
701 if (ret) {
702 dev_err(&pdev->dev,
703 "failed: irq request (IRQ: %d,"
704 " error :%d)\n",
705 muic_irq->irq, ret);
707 goto err_irq;
711 /* Initialize extcon device */
712 info->edev = devm_kzalloc(&pdev->dev, sizeof(struct extcon_dev),
713 GFP_KERNEL);
714 if (!info->edev) {
715 dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
716 ret = -ENOMEM;
717 goto err_irq;
719 info->edev->name = DEV_NAME;
720 info->edev->supported_cable = max77693_extcon_cable;
721 ret = extcon_dev_register(info->edev, NULL);
722 if (ret) {
723 dev_err(&pdev->dev, "failed to register extcon device\n");
724 goto err_irq;
727 /* Initialize MUIC register by using platform data */
728 for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
729 enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR;
731 max77693_write_reg(info->max77693->regmap_muic,
732 muic_pdata->init_data[i].addr,
733 muic_pdata->init_data[i].data);
735 switch (muic_pdata->init_data[i].addr) {
736 case MAX77693_MUIC_REG_INTMASK1:
737 irq_src = MUIC_INT1;
738 break;
739 case MAX77693_MUIC_REG_INTMASK2:
740 irq_src = MUIC_INT2;
741 break;
742 case MAX77693_MUIC_REG_INTMASK3:
743 irq_src = MUIC_INT3;
744 break;
747 if (irq_src < MAX77693_IRQ_GROUP_NR)
748 info->max77693->irq_masks_cur[irq_src]
749 = muic_pdata->init_data[i].data;
752 /* Check revision number of MUIC device*/
753 ret = max77693_read_reg(info->max77693->regmap_muic,
754 MAX77693_MUIC_REG_ID, &id);
755 if (ret < 0) {
756 dev_err(&pdev->dev, "failed to read revision number\n");
757 goto err_irq;
759 dev_info(info->dev, "device ID : 0x%x\n", id);
761 /* Set ADC debounce time */
762 max77693_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
764 /* Detect accessory on boot */
765 max77693_muic_detect_accessory(info);
767 return ret;
769 err_irq:
770 while (--i >= 0)
771 free_irq(muic_irqs[i].virq, info);
772 return ret;
775 static int max77693_muic_remove(struct platform_device *pdev)
777 struct max77693_muic_info *info = platform_get_drvdata(pdev);
778 int i;
780 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
781 free_irq(muic_irqs[i].virq, info);
782 cancel_work_sync(&info->irq_work);
783 extcon_dev_unregister(info->edev);
785 return 0;
788 static struct platform_driver max77693_muic_driver = {
789 .driver = {
790 .name = DEV_NAME,
791 .owner = THIS_MODULE,
793 .probe = max77693_muic_probe,
794 .remove = max77693_muic_remove,
797 module_platform_driver(max77693_muic_driver);
799 MODULE_DESCRIPTION("Maxim MAX77693 Extcon driver");
800 MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
801 MODULE_LICENSE("GPL");
802 MODULE_ALIAS("platform:extcon-max77693");