x86/build: Don't add -maccumulate-outgoing-args w/o compiler support
[linux/fpc-iii.git] / drivers / spi / spi-omap-100k.c
blob76a8425be227bdb5494bd255917a50f7460b007d
1 /*
2 * OMAP7xx SPI 100k controller driver
3 * Author: Fabrice Crohas <fcrohas@gmail.com>
4 * from original omap1_mcspi driver
6 * Copyright (C) 2005, 2006 Nokia Corporation
7 * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
8 * Juha Yrj�l� <juha.yrjola@nokia.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/init.h>
22 #include <linux/interrupt.h>
23 #include <linux/module.h>
24 #include <linux/device.h>
25 #include <linux/delay.h>
26 #include <linux/platform_device.h>
27 #include <linux/pm_runtime.h>
28 #include <linux/err.h>
29 #include <linux/clk.h>
30 #include <linux/io.h>
31 #include <linux/gpio.h>
32 #include <linux/slab.h>
34 #include <linux/spi/spi.h>
36 #define OMAP1_SPI100K_MAX_FREQ 48000000
38 #define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
40 #define SPI_SETUP1 0x00
41 #define SPI_SETUP2 0x02
42 #define SPI_CTRL 0x04
43 #define SPI_STATUS 0x06
44 #define SPI_TX_LSB 0x08
45 #define SPI_TX_MSB 0x0a
46 #define SPI_RX_LSB 0x0c
47 #define SPI_RX_MSB 0x0e
49 #define SPI_SETUP1_INT_READ_ENABLE (1UL << 5)
50 #define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4)
51 #define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1)
52 #define SPI_SETUP1_CLOCK_ENABLE (1UL << 0)
54 #define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0)
55 #define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0)
56 #define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5)
57 #define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5)
58 #define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10)
59 #define SPI_SETUP2_EDGE_TRIGGER (1UL << 10)
61 #define SPI_CTRL_SEN(x) ((x) << 7)
62 #define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2)
63 #define SPI_CTRL_WR (1UL << 1)
64 #define SPI_CTRL_RD (1UL << 0)
66 #define SPI_STATUS_WE (1UL << 1)
67 #define SPI_STATUS_RD (1UL << 0)
69 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
70 * cache operations; better heuristics consider wordsize and bitrate.
72 #define DMA_MIN_BYTES 8
74 #define SPI_RUNNING 0
75 #define SPI_SHUTDOWN 1
77 struct omap1_spi100k {
78 struct clk *ick;
79 struct clk *fck;
81 /* Virtual base address of the controller */
82 void __iomem *base;
85 struct omap1_spi100k_cs {
86 void __iomem *base;
87 int word_len;
90 static void spi100k_enable_clock(struct spi_master *master)
92 unsigned int val;
93 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
95 /* enable SPI */
96 val = readw(spi100k->base + SPI_SETUP1);
97 val |= SPI_SETUP1_CLOCK_ENABLE;
98 writew(val, spi100k->base + SPI_SETUP1);
101 static void spi100k_disable_clock(struct spi_master *master)
103 unsigned int val;
104 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
106 /* disable SPI */
107 val = readw(spi100k->base + SPI_SETUP1);
108 val &= ~SPI_SETUP1_CLOCK_ENABLE;
109 writew(val, spi100k->base + SPI_SETUP1);
112 static void spi100k_write_data(struct spi_master *master, int len, int data)
114 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
116 /* write 16-bit word, shifting 8-bit data if necessary */
117 if (len <= 8) {
118 data <<= 8;
119 len = 16;
122 spi100k_enable_clock(master);
123 writew(data , spi100k->base + SPI_TX_MSB);
125 writew(SPI_CTRL_SEN(0) |
126 SPI_CTRL_WORD_SIZE(len) |
127 SPI_CTRL_WR,
128 spi100k->base + SPI_CTRL);
130 /* Wait for bit ack send change */
131 while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE)
133 udelay(1000);
135 spi100k_disable_clock(master);
138 static int spi100k_read_data(struct spi_master *master, int len)
140 int dataH, dataL;
141 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
143 /* Always do at least 16 bits */
144 if (len <= 8)
145 len = 16;
147 spi100k_enable_clock(master);
148 writew(SPI_CTRL_SEN(0) |
149 SPI_CTRL_WORD_SIZE(len) |
150 SPI_CTRL_RD,
151 spi100k->base + SPI_CTRL);
153 while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD)
155 udelay(1000);
157 dataL = readw(spi100k->base + SPI_RX_LSB);
158 dataH = readw(spi100k->base + SPI_RX_MSB);
159 spi100k_disable_clock(master);
161 return dataL;
164 static void spi100k_open(struct spi_master *master)
166 /* get control of SPI */
167 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
169 writew(SPI_SETUP1_INT_READ_ENABLE |
170 SPI_SETUP1_INT_WRITE_ENABLE |
171 SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1);
173 /* configure clock and interrupts */
174 writew(SPI_SETUP2_ACTIVE_EDGE_FALLING |
175 SPI_SETUP2_NEGATIVE_LEVEL |
176 SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2);
179 static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable)
181 if (enable)
182 writew(0x05fc, spi100k->base + SPI_CTRL);
183 else
184 writew(0x05fd, spi100k->base + SPI_CTRL);
187 static unsigned
188 omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
190 struct omap1_spi100k_cs *cs = spi->controller_state;
191 unsigned int count, c;
192 int word_len;
194 count = xfer->len;
195 c = count;
196 word_len = cs->word_len;
198 if (word_len <= 8) {
199 u8 *rx;
200 const u8 *tx;
202 rx = xfer->rx_buf;
203 tx = xfer->tx_buf;
204 do {
205 c -= 1;
206 if (xfer->tx_buf != NULL)
207 spi100k_write_data(spi->master, word_len, *tx++);
208 if (xfer->rx_buf != NULL)
209 *rx++ = spi100k_read_data(spi->master, word_len);
210 } while (c);
211 } else if (word_len <= 16) {
212 u16 *rx;
213 const u16 *tx;
215 rx = xfer->rx_buf;
216 tx = xfer->tx_buf;
217 do {
218 c -= 2;
219 if (xfer->tx_buf != NULL)
220 spi100k_write_data(spi->master, word_len, *tx++);
221 if (xfer->rx_buf != NULL)
222 *rx++ = spi100k_read_data(spi->master, word_len);
223 } while (c);
224 } else if (word_len <= 32) {
225 u32 *rx;
226 const u32 *tx;
228 rx = xfer->rx_buf;
229 tx = xfer->tx_buf;
230 do {
231 c -= 4;
232 if (xfer->tx_buf != NULL)
233 spi100k_write_data(spi->master, word_len, *tx);
234 if (xfer->rx_buf != NULL)
235 *rx = spi100k_read_data(spi->master, word_len);
236 } while (c);
238 return count - c;
241 /* called only when no transfer is active to this device */
242 static int omap1_spi100k_setup_transfer(struct spi_device *spi,
243 struct spi_transfer *t)
245 struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master);
246 struct omap1_spi100k_cs *cs = spi->controller_state;
247 u8 word_len;
249 if (t != NULL)
250 word_len = t->bits_per_word;
251 else
252 word_len = spi->bits_per_word;
254 if (spi->bits_per_word > 32)
255 return -EINVAL;
256 cs->word_len = word_len;
258 /* SPI init before transfer */
259 writew(0x3e , spi100k->base + SPI_SETUP1);
260 writew(0x00 , spi100k->base + SPI_STATUS);
261 writew(0x3e , spi100k->base + SPI_CTRL);
263 return 0;
266 /* the spi->mode bits understood by this driver: */
267 #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
269 static int omap1_spi100k_setup(struct spi_device *spi)
271 int ret;
272 struct omap1_spi100k *spi100k;
273 struct omap1_spi100k_cs *cs = spi->controller_state;
275 spi100k = spi_master_get_devdata(spi->master);
277 if (!cs) {
278 cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL);
279 if (!cs)
280 return -ENOMEM;
281 cs->base = spi100k->base + spi->chip_select * 0x14;
282 spi->controller_state = cs;
285 spi100k_open(spi->master);
287 clk_prepare_enable(spi100k->ick);
288 clk_prepare_enable(spi100k->fck);
290 ret = omap1_spi100k_setup_transfer(spi, NULL);
292 clk_disable_unprepare(spi100k->ick);
293 clk_disable_unprepare(spi100k->fck);
295 return ret;
298 static int omap1_spi100k_transfer_one_message(struct spi_master *master,
299 struct spi_message *m)
301 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
302 struct spi_device *spi = m->spi;
303 struct spi_transfer *t = NULL;
304 int cs_active = 0;
305 int status = 0;
307 list_for_each_entry(t, &m->transfers, transfer_list) {
308 if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
309 status = -EINVAL;
310 break;
312 status = omap1_spi100k_setup_transfer(spi, t);
313 if (status < 0)
314 break;
316 if (!cs_active) {
317 omap1_spi100k_force_cs(spi100k, 1);
318 cs_active = 1;
321 if (t->len) {
322 unsigned count;
324 count = omap1_spi100k_txrx_pio(spi, t);
325 m->actual_length += count;
327 if (count != t->len) {
328 status = -EIO;
329 break;
333 if (t->delay_usecs)
334 udelay(t->delay_usecs);
336 /* ignore the "leave it on after last xfer" hint */
338 if (t->cs_change) {
339 omap1_spi100k_force_cs(spi100k, 0);
340 cs_active = 0;
344 status = omap1_spi100k_setup_transfer(spi, NULL);
346 if (cs_active)
347 omap1_spi100k_force_cs(spi100k, 0);
349 m->status = status;
351 spi_finalize_current_message(master);
353 return status;
356 static int omap1_spi100k_probe(struct platform_device *pdev)
358 struct spi_master *master;
359 struct omap1_spi100k *spi100k;
360 int status = 0;
362 if (!pdev->id)
363 return -EINVAL;
365 master = spi_alloc_master(&pdev->dev, sizeof(*spi100k));
366 if (master == NULL) {
367 dev_dbg(&pdev->dev, "master allocation failed\n");
368 return -ENOMEM;
371 if (pdev->id != -1)
372 master->bus_num = pdev->id;
374 master->setup = omap1_spi100k_setup;
375 master->transfer_one_message = omap1_spi100k_transfer_one_message;
376 master->num_chipselect = 2;
377 master->mode_bits = MODEBITS;
378 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
379 master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
380 master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
381 master->auto_runtime_pm = true;
383 spi100k = spi_master_get_devdata(master);
386 * The memory region base address is taken as the platform_data.
387 * You should allocate this with ioremap() before initializing
388 * the SPI.
390 spi100k->base = (void __iomem *)dev_get_platdata(&pdev->dev);
392 spi100k->ick = devm_clk_get(&pdev->dev, "ick");
393 if (IS_ERR(spi100k->ick)) {
394 dev_dbg(&pdev->dev, "can't get spi100k_ick\n");
395 status = PTR_ERR(spi100k->ick);
396 goto err;
399 spi100k->fck = devm_clk_get(&pdev->dev, "fck");
400 if (IS_ERR(spi100k->fck)) {
401 dev_dbg(&pdev->dev, "can't get spi100k_fck\n");
402 status = PTR_ERR(spi100k->fck);
403 goto err;
406 status = clk_prepare_enable(spi100k->ick);
407 if (status != 0) {
408 dev_err(&pdev->dev, "failed to enable ick: %d\n", status);
409 goto err;
412 status = clk_prepare_enable(spi100k->fck);
413 if (status != 0) {
414 dev_err(&pdev->dev, "failed to enable fck: %d\n", status);
415 goto err_ick;
418 pm_runtime_enable(&pdev->dev);
419 pm_runtime_set_active(&pdev->dev);
421 status = devm_spi_register_master(&pdev->dev, master);
422 if (status < 0)
423 goto err_fck;
425 return status;
427 err_fck:
428 clk_disable_unprepare(spi100k->fck);
429 err_ick:
430 clk_disable_unprepare(spi100k->ick);
431 err:
432 spi_master_put(master);
433 return status;
436 static int omap1_spi100k_remove(struct platform_device *pdev)
438 struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
439 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
441 pm_runtime_disable(&pdev->dev);
443 clk_disable_unprepare(spi100k->fck);
444 clk_disable_unprepare(spi100k->ick);
446 return 0;
449 #ifdef CONFIG_PM
450 static int omap1_spi100k_runtime_suspend(struct device *dev)
452 struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
453 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
455 clk_disable_unprepare(spi100k->ick);
456 clk_disable_unprepare(spi100k->fck);
458 return 0;
461 static int omap1_spi100k_runtime_resume(struct device *dev)
463 struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
464 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
465 int ret;
467 ret = clk_prepare_enable(spi100k->ick);
468 if (ret != 0) {
469 dev_err(dev, "Failed to enable ick: %d\n", ret);
470 return ret;
473 ret = clk_prepare_enable(spi100k->fck);
474 if (ret != 0) {
475 dev_err(dev, "Failed to enable fck: %d\n", ret);
476 clk_disable_unprepare(spi100k->ick);
477 return ret;
480 return 0;
482 #endif
484 static const struct dev_pm_ops omap1_spi100k_pm = {
485 SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend,
486 omap1_spi100k_runtime_resume, NULL)
489 static struct platform_driver omap1_spi100k_driver = {
490 .driver = {
491 .name = "omap1_spi100k",
492 .pm = &omap1_spi100k_pm,
494 .probe = omap1_spi100k_probe,
495 .remove = omap1_spi100k_remove,
498 module_platform_driver(omap1_spi100k_driver);
500 MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver");
501 MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>");
502 MODULE_LICENSE("GPL");