ARM: mm: avoid taking ASID spinlock on fastpath
[linux/fpc-iii.git] / arch / mips / kernel / vpe.c
blobeec690af6581616957089993e2decfd91f13b4fd
1 /*
2 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
11 * for more details.
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
19 * VPE support module
21 * Provides support for loading a MIPS SP program on VPE1.
22 * The SP environment is rather simple, no tlb's. It needs to be relocatable
23 * (or partially linked). You should initialise your stack in the startup
24 * code. This loader looks for the symbol __start and sets up
25 * execution to resume from there. The MIPS SDE kit contains suitable examples.
27 * To load and run, simply cat a SP 'program file' to /dev/vpe1.
28 * i.e cat spapp >/dev/vpe1.
30 #include <linux/kernel.h>
31 #include <linux/device.h>
32 #include <linux/fs.h>
33 #include <linux/init.h>
34 #include <asm/uaccess.h>
35 #include <linux/slab.h>
36 #include <linux/list.h>
37 #include <linux/vmalloc.h>
38 #include <linux/elf.h>
39 #include <linux/seq_file.h>
40 #include <linux/syscalls.h>
41 #include <linux/moduleloader.h>
42 #include <linux/interrupt.h>
43 #include <linux/poll.h>
44 #include <linux/bootmem.h>
45 #include <asm/mipsregs.h>
46 #include <asm/mipsmtregs.h>
47 #include <asm/cacheflush.h>
48 #include <linux/atomic.h>
49 #include <asm/cpu.h>
50 #include <asm/mips_mt.h>
51 #include <asm/processor.h>
52 #include <asm/vpe.h>
54 typedef void *vpe_handle;
56 #ifndef ARCH_SHF_SMALL
57 #define ARCH_SHF_SMALL 0
58 #endif
60 /* If this is set, the section belongs in the init part of the module */
61 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
64 * The number of TCs and VPEs physically available on the core
66 static int hw_tcs, hw_vpes;
67 static char module_name[] = "vpe";
68 static int major;
69 static const int minor = 1; /* fixed for now */
71 /* grab the likely amount of memory we will need. */
72 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
73 #define P_SIZE (2 * 1024 * 1024)
74 #else
75 /* add an overhead to the max kmalloc size for non-striped symbols/etc */
76 #define P_SIZE (256 * 1024)
77 #endif
79 extern unsigned long physical_memsize;
81 #define MAX_VPES 16
82 #define VPE_PATH_MAX 256
84 enum vpe_state {
85 VPE_STATE_UNUSED = 0,
86 VPE_STATE_INUSE,
87 VPE_STATE_RUNNING
90 enum tc_state {
91 TC_STATE_UNUSED = 0,
92 TC_STATE_INUSE,
93 TC_STATE_RUNNING,
94 TC_STATE_DYNAMIC
97 struct vpe {
98 enum vpe_state state;
100 /* (device) minor associated with this vpe */
101 int minor;
103 /* elfloader stuff */
104 void *load_addr;
105 unsigned long len;
106 char *pbuffer;
107 unsigned long plen;
108 unsigned int uid, gid;
109 char cwd[VPE_PATH_MAX];
111 unsigned long __start;
113 /* tc's associated with this vpe */
114 struct list_head tc;
116 /* The list of vpe's */
117 struct list_head list;
119 /* shared symbol address */
120 void *shared_ptr;
122 /* the list of who wants to know when something major happens */
123 struct list_head notify;
125 unsigned int ntcs;
128 struct tc {
129 enum tc_state state;
130 int index;
132 struct vpe *pvpe; /* parent VPE */
133 struct list_head tc; /* The list of TC's with this VPE */
134 struct list_head list; /* The global list of tc's */
137 struct {
138 spinlock_t vpe_list_lock;
139 struct list_head vpe_list; /* Virtual processing elements */
140 spinlock_t tc_list_lock;
141 struct list_head tc_list; /* Thread contexts */
142 } vpecontrol = {
143 .vpe_list_lock = __SPIN_LOCK_UNLOCKED(vpe_list_lock),
144 .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
145 .tc_list_lock = __SPIN_LOCK_UNLOCKED(tc_list_lock),
146 .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
149 static void release_progmem(void *ptr);
151 /* get the vpe associated with this minor */
152 static struct vpe *get_vpe(int minor)
154 struct vpe *res, *v;
156 if (!cpu_has_mipsmt)
157 return NULL;
159 res = NULL;
160 spin_lock(&vpecontrol.vpe_list_lock);
161 list_for_each_entry(v, &vpecontrol.vpe_list, list) {
162 if (v->minor == minor) {
163 res = v;
164 break;
167 spin_unlock(&vpecontrol.vpe_list_lock);
169 return res;
172 /* get the vpe associated with this minor */
173 static struct tc *get_tc(int index)
175 struct tc *res, *t;
177 res = NULL;
178 spin_lock(&vpecontrol.tc_list_lock);
179 list_for_each_entry(t, &vpecontrol.tc_list, list) {
180 if (t->index == index) {
181 res = t;
182 break;
185 spin_unlock(&vpecontrol.tc_list_lock);
187 return res;
190 /* allocate a vpe and associate it with this minor (or index) */
191 static struct vpe *alloc_vpe(int minor)
193 struct vpe *v;
195 if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
196 return NULL;
198 INIT_LIST_HEAD(&v->tc);
199 spin_lock(&vpecontrol.vpe_list_lock);
200 list_add_tail(&v->list, &vpecontrol.vpe_list);
201 spin_unlock(&vpecontrol.vpe_list_lock);
203 INIT_LIST_HEAD(&v->notify);
204 v->minor = minor;
206 return v;
209 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
210 static struct tc *alloc_tc(int index)
212 struct tc *tc;
214 if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL)
215 goto out;
217 INIT_LIST_HEAD(&tc->tc);
218 tc->index = index;
220 spin_lock(&vpecontrol.tc_list_lock);
221 list_add_tail(&tc->list, &vpecontrol.tc_list);
222 spin_unlock(&vpecontrol.tc_list_lock);
224 out:
225 return tc;
228 /* clean up and free everything */
229 static void release_vpe(struct vpe *v)
231 list_del(&v->list);
232 if (v->load_addr)
233 release_progmem(v);
234 kfree(v);
237 static void __maybe_unused dump_mtregs(void)
239 unsigned long val;
241 val = read_c0_config3();
242 printk("config3 0x%lx MT %ld\n", val,
243 (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
245 val = read_c0_mvpcontrol();
246 printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
247 (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
248 (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
249 (val & MVPCONTROL_EVP));
251 val = read_c0_mvpconf0();
252 printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
253 (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
254 val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
257 /* Find some VPE program space */
258 static void *alloc_progmem(unsigned long len)
260 void *addr;
262 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
264 * This means you must tell Linux to use less memory than you
265 * physically have, for example by passing a mem= boot argument.
267 addr = pfn_to_kaddr(max_low_pfn);
268 memset(addr, 0, len);
269 #else
270 /* simple grab some mem for now */
271 addr = kzalloc(len, GFP_KERNEL);
272 #endif
274 return addr;
277 static void release_progmem(void *ptr)
279 #ifndef CONFIG_MIPS_VPE_LOADER_TOM
280 kfree(ptr);
281 #endif
284 /* Update size with this section: return offset. */
285 static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
287 long ret;
289 ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
290 *size = ret + sechdr->sh_size;
291 return ret;
294 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
295 might -- code, read-only data, read-write data, small data. Tally
296 sizes, and place the offsets into sh_entsize fields: high bit means it
297 belongs in init. */
298 static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
299 Elf_Shdr * sechdrs, const char *secstrings)
301 static unsigned long const masks[][2] = {
302 /* NOTE: all executable code must be the first section
303 * in this array; otherwise modify the text_size
304 * finder in the two loops below */
305 {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
306 {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
307 {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
308 {ARCH_SHF_SMALL | SHF_ALLOC, 0}
310 unsigned int m, i;
312 for (i = 0; i < hdr->e_shnum; i++)
313 sechdrs[i].sh_entsize = ~0UL;
315 for (m = 0; m < ARRAY_SIZE(masks); ++m) {
316 for (i = 0; i < hdr->e_shnum; ++i) {
317 Elf_Shdr *s = &sechdrs[i];
319 // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
320 if ((s->sh_flags & masks[m][0]) != masks[m][0]
321 || (s->sh_flags & masks[m][1])
322 || s->sh_entsize != ~0UL)
323 continue;
324 s->sh_entsize =
325 get_offset((unsigned long *)&mod->core_size, s);
328 if (m == 0)
329 mod->core_text_size = mod->core_size;
335 /* from module-elf32.c, but subverted a little */
337 struct mips_hi16 {
338 struct mips_hi16 *next;
339 Elf32_Addr *addr;
340 Elf32_Addr value;
343 static struct mips_hi16 *mips_hi16_list;
344 static unsigned int gp_offs, gp_addr;
346 static int apply_r_mips_none(struct module *me, uint32_t *location,
347 Elf32_Addr v)
349 return 0;
352 static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
353 Elf32_Addr v)
355 int rel;
357 if( !(*location & 0xffff) ) {
358 rel = (int)v - gp_addr;
360 else {
361 /* .sbss + gp(relative) + offset */
362 /* kludge! */
363 rel = (int)(short)((int)v + gp_offs +
364 (int)(short)(*location & 0xffff) - gp_addr);
367 if( (rel > 32768) || (rel < -32768) ) {
368 printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: "
369 "relative address 0x%x out of range of gp register\n",
370 rel);
371 return -ENOEXEC;
374 *location = (*location & 0xffff0000) | (rel & 0xffff);
376 return 0;
379 static int apply_r_mips_pc16(struct module *me, uint32_t *location,
380 Elf32_Addr v)
382 int rel;
383 rel = (((unsigned int)v - (unsigned int)location));
384 rel >>= 2; // because the offset is in _instructions_ not bytes.
385 rel -= 1; // and one instruction less due to the branch delay slot.
387 if( (rel > 32768) || (rel < -32768) ) {
388 printk(KERN_DEBUG "VPE loader: "
389 "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
390 return -ENOEXEC;
393 *location = (*location & 0xffff0000) | (rel & 0xffff);
395 return 0;
398 static int apply_r_mips_32(struct module *me, uint32_t *location,
399 Elf32_Addr v)
401 *location += v;
403 return 0;
406 static int apply_r_mips_26(struct module *me, uint32_t *location,
407 Elf32_Addr v)
409 if (v % 4) {
410 printk(KERN_DEBUG "VPE loader: apply_r_mips_26 "
411 " unaligned relocation\n");
412 return -ENOEXEC;
416 * Not desperately convinced this is a good check of an overflow condition
417 * anyway. But it gets in the way of handling undefined weak symbols which
418 * we want to set to zero.
419 * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
420 * printk(KERN_ERR
421 * "module %s: relocation overflow\n",
422 * me->name);
423 * return -ENOEXEC;
427 *location = (*location & ~0x03ffffff) |
428 ((*location + (v >> 2)) & 0x03ffffff);
429 return 0;
432 static int apply_r_mips_hi16(struct module *me, uint32_t *location,
433 Elf32_Addr v)
435 struct mips_hi16 *n;
438 * We cannot relocate this one now because we don't know the value of
439 * the carry we need to add. Save the information, and let LO16 do the
440 * actual relocation.
442 n = kmalloc(sizeof *n, GFP_KERNEL);
443 if (!n)
444 return -ENOMEM;
446 n->addr = location;
447 n->value = v;
448 n->next = mips_hi16_list;
449 mips_hi16_list = n;
451 return 0;
454 static int apply_r_mips_lo16(struct module *me, uint32_t *location,
455 Elf32_Addr v)
457 unsigned long insnlo = *location;
458 Elf32_Addr val, vallo;
459 struct mips_hi16 *l, *next;
461 /* Sign extend the addend we extract from the lo insn. */
462 vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
464 if (mips_hi16_list != NULL) {
466 l = mips_hi16_list;
467 while (l != NULL) {
468 unsigned long insn;
471 * The value for the HI16 had best be the same.
473 if (v != l->value) {
474 printk(KERN_DEBUG "VPE loader: "
475 "apply_r_mips_lo16/hi16: \t"
476 "inconsistent value information\n");
477 goto out_free;
481 * Do the HI16 relocation. Note that we actually don't
482 * need to know anything about the LO16 itself, except
483 * where to find the low 16 bits of the addend needed
484 * by the LO16.
486 insn = *l->addr;
487 val = ((insn & 0xffff) << 16) + vallo;
488 val += v;
491 * Account for the sign extension that will happen in
492 * the low bits.
494 val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
496 insn = (insn & ~0xffff) | val;
497 *l->addr = insn;
499 next = l->next;
500 kfree(l);
501 l = next;
504 mips_hi16_list = NULL;
508 * Ok, we're done with the HI16 relocs. Now deal with the LO16.
510 val = v + vallo;
511 insnlo = (insnlo & ~0xffff) | (val & 0xffff);
512 *location = insnlo;
514 return 0;
516 out_free:
517 while (l != NULL) {
518 next = l->next;
519 kfree(l);
520 l = next;
522 mips_hi16_list = NULL;
524 return -ENOEXEC;
527 static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
528 Elf32_Addr v) = {
529 [R_MIPS_NONE] = apply_r_mips_none,
530 [R_MIPS_32] = apply_r_mips_32,
531 [R_MIPS_26] = apply_r_mips_26,
532 [R_MIPS_HI16] = apply_r_mips_hi16,
533 [R_MIPS_LO16] = apply_r_mips_lo16,
534 [R_MIPS_GPREL16] = apply_r_mips_gprel16,
535 [R_MIPS_PC16] = apply_r_mips_pc16
538 static char *rstrs[] = {
539 [R_MIPS_NONE] = "MIPS_NONE",
540 [R_MIPS_32] = "MIPS_32",
541 [R_MIPS_26] = "MIPS_26",
542 [R_MIPS_HI16] = "MIPS_HI16",
543 [R_MIPS_LO16] = "MIPS_LO16",
544 [R_MIPS_GPREL16] = "MIPS_GPREL16",
545 [R_MIPS_PC16] = "MIPS_PC16"
548 static int apply_relocations(Elf32_Shdr *sechdrs,
549 const char *strtab,
550 unsigned int symindex,
551 unsigned int relsec,
552 struct module *me)
554 Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
555 Elf32_Sym *sym;
556 uint32_t *location;
557 unsigned int i;
558 Elf32_Addr v;
559 int res;
561 for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
562 Elf32_Word r_info = rel[i].r_info;
564 /* This is where to make the change */
565 location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
566 + rel[i].r_offset;
567 /* This is the symbol it is referring to */
568 sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
569 + ELF32_R_SYM(r_info);
571 if (!sym->st_value) {
572 printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
573 me->name, strtab + sym->st_name);
574 /* just print the warning, dont barf */
577 v = sym->st_value;
579 res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
580 if( res ) {
581 char *r = rstrs[ELF32_R_TYPE(r_info)];
582 printk(KERN_WARNING "VPE loader: .text+0x%x "
583 "relocation type %s for symbol \"%s\" failed\n",
584 rel[i].r_offset, r ? r : "UNKNOWN",
585 strtab + sym->st_name);
586 return res;
590 return 0;
593 static inline void save_gp_address(unsigned int secbase, unsigned int rel)
595 gp_addr = secbase + rel;
596 gp_offs = gp_addr - (secbase & 0xffff0000);
598 /* end module-elf32.c */
602 /* Change all symbols so that sh_value encodes the pointer directly. */
603 static void simplify_symbols(Elf_Shdr * sechdrs,
604 unsigned int symindex,
605 const char *strtab,
606 const char *secstrings,
607 unsigned int nsecs, struct module *mod)
609 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
610 unsigned long secbase, bssbase = 0;
611 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
612 int size;
614 /* find the .bss section for COMMON symbols */
615 for (i = 0; i < nsecs; i++) {
616 if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) {
617 bssbase = sechdrs[i].sh_addr;
618 break;
622 for (i = 1; i < n; i++) {
623 switch (sym[i].st_shndx) {
624 case SHN_COMMON:
625 /* Allocate space for the symbol in the .bss section.
626 st_value is currently size.
627 We want it to have the address of the symbol. */
629 size = sym[i].st_value;
630 sym[i].st_value = bssbase;
632 bssbase += size;
633 break;
635 case SHN_ABS:
636 /* Don't need to do anything */
637 break;
639 case SHN_UNDEF:
640 /* ret = -ENOENT; */
641 break;
643 case SHN_MIPS_SCOMMON:
644 printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON "
645 "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
646 sym[i].st_shndx);
647 // .sbss section
648 break;
650 default:
651 secbase = sechdrs[sym[i].st_shndx].sh_addr;
653 if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
654 save_gp_address(secbase, sym[i].st_value);
657 sym[i].st_value += secbase;
658 break;
663 #ifdef DEBUG_ELFLOADER
664 static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
665 const char *strtab, struct module *mod)
667 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
668 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
670 printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
671 for (i = 1; i < n; i++) {
672 printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
673 strtab + sym[i].st_name, sym[i].st_value);
676 #endif
678 /* We are prepared so configure and start the VPE... */
679 static int vpe_run(struct vpe * v)
681 unsigned long flags, val, dmt_flag;
682 struct vpe_notifications *n;
683 unsigned int vpeflags;
684 struct tc *t;
686 /* check we are the Master VPE */
687 local_irq_save(flags);
688 val = read_c0_vpeconf0();
689 if (!(val & VPECONF0_MVP)) {
690 printk(KERN_WARNING
691 "VPE loader: only Master VPE's are allowed to configure MT\n");
692 local_irq_restore(flags);
694 return -1;
697 dmt_flag = dmt();
698 vpeflags = dvpe();
700 if (!list_empty(&v->tc)) {
701 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
702 evpe(vpeflags);
703 emt(dmt_flag);
704 local_irq_restore(flags);
706 printk(KERN_WARNING
707 "VPE loader: TC %d is already in use.\n",
708 t->index);
709 return -ENOEXEC;
711 } else {
712 evpe(vpeflags);
713 emt(dmt_flag);
714 local_irq_restore(flags);
716 printk(KERN_WARNING
717 "VPE loader: No TC's associated with VPE %d\n",
718 v->minor);
720 return -ENOEXEC;
723 /* Put MVPE's into 'configuration state' */
724 set_c0_mvpcontrol(MVPCONTROL_VPC);
726 settc(t->index);
728 /* should check it is halted, and not activated */
729 if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
730 evpe(vpeflags);
731 emt(dmt_flag);
732 local_irq_restore(flags);
734 printk(KERN_WARNING "VPE loader: TC %d is already active!\n",
735 t->index);
737 return -ENOEXEC;
740 /* Write the address we want it to start running from in the TCPC register. */
741 write_tc_c0_tcrestart((unsigned long)v->__start);
742 write_tc_c0_tccontext((unsigned long)0);
745 * Mark the TC as activated, not interrupt exempt and not dynamically
746 * allocatable
748 val = read_tc_c0_tcstatus();
749 val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
750 write_tc_c0_tcstatus(val);
752 write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
755 * The sde-kit passes 'memsize' to __start in $a3, so set something
756 * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
757 * DFLT_HEAP_SIZE when you compile your program
759 mttgpr(6, v->ntcs);
760 mttgpr(7, physical_memsize);
762 /* set up VPE1 */
764 * bind the TC to VPE 1 as late as possible so we only have the final
765 * VPE registers to set up, and so an EJTAG probe can trigger on it
767 write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
769 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
771 back_to_back_c0_hazard();
773 /* Set up the XTC bit in vpeconf0 to point at our tc */
774 write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
775 | (t->index << VPECONF0_XTC_SHIFT));
777 back_to_back_c0_hazard();
779 /* enable this VPE */
780 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
782 /* clear out any left overs from a previous program */
783 write_vpe_c0_status(0);
784 write_vpe_c0_cause(0);
786 /* take system out of configuration state */
787 clear_c0_mvpcontrol(MVPCONTROL_VPC);
790 * SMTC/SMVP kernels manage VPE enable independently,
791 * but uniprocessor kernels need to turn it on, even
792 * if that wasn't the pre-dvpe() state.
794 #ifdef CONFIG_SMP
795 evpe(vpeflags);
796 #else
797 evpe(EVPE_ENABLE);
798 #endif
799 emt(dmt_flag);
800 local_irq_restore(flags);
802 list_for_each_entry(n, &v->notify, list)
803 n->start(minor);
805 return 0;
808 static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
809 unsigned int symindex, const char *strtab,
810 struct module *mod)
812 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
813 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
815 for (i = 1; i < n; i++) {
816 if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
817 v->__start = sym[i].st_value;
820 if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
821 v->shared_ptr = (void *)sym[i].st_value;
825 if ( (v->__start == 0) || (v->shared_ptr == NULL))
826 return -1;
828 return 0;
832 * Allocates a VPE with some program code space(the load address), copies the
833 * contents of the program (p)buffer performing relocatations/etc, free's it
834 * when finished.
836 static int vpe_elfload(struct vpe * v)
838 Elf_Ehdr *hdr;
839 Elf_Shdr *sechdrs;
840 long err = 0;
841 char *secstrings, *strtab = NULL;
842 unsigned int len, i, symindex = 0, strindex = 0, relocate = 0;
843 struct module mod; // so we can re-use the relocations code
845 memset(&mod, 0, sizeof(struct module));
846 strcpy(mod.name, "VPE loader");
848 hdr = (Elf_Ehdr *) v->pbuffer;
849 len = v->plen;
851 /* Sanity checks against insmoding binaries or wrong arch,
852 weird elf version */
853 if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
854 || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
855 || !elf_check_arch(hdr)
856 || hdr->e_shentsize != sizeof(*sechdrs)) {
857 printk(KERN_WARNING
858 "VPE loader: program wrong arch or weird elf version\n");
860 return -ENOEXEC;
863 if (hdr->e_type == ET_REL)
864 relocate = 1;
866 if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
867 printk(KERN_ERR "VPE loader: program length %u truncated\n",
868 len);
870 return -ENOEXEC;
873 /* Convenience variables */
874 sechdrs = (void *)hdr + hdr->e_shoff;
875 secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
876 sechdrs[0].sh_addr = 0;
878 /* And these should exist, but gcc whinges if we don't init them */
879 symindex = strindex = 0;
881 if (relocate) {
882 for (i = 1; i < hdr->e_shnum; i++) {
883 if (sechdrs[i].sh_type != SHT_NOBITS
884 && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
885 printk(KERN_ERR "VPE program length %u truncated\n",
886 len);
887 return -ENOEXEC;
890 /* Mark all sections sh_addr with their address in the
891 temporary image. */
892 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
894 /* Internal symbols and strings. */
895 if (sechdrs[i].sh_type == SHT_SYMTAB) {
896 symindex = i;
897 strindex = sechdrs[i].sh_link;
898 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
901 layout_sections(&mod, hdr, sechdrs, secstrings);
904 v->load_addr = alloc_progmem(mod.core_size);
905 if (!v->load_addr)
906 return -ENOMEM;
908 pr_info("VPE loader: loading to %p\n", v->load_addr);
910 if (relocate) {
911 for (i = 0; i < hdr->e_shnum; i++) {
912 void *dest;
914 if (!(sechdrs[i].sh_flags & SHF_ALLOC))
915 continue;
917 dest = v->load_addr + sechdrs[i].sh_entsize;
919 if (sechdrs[i].sh_type != SHT_NOBITS)
920 memcpy(dest, (void *)sechdrs[i].sh_addr,
921 sechdrs[i].sh_size);
922 /* Update sh_addr to point to copy in image. */
923 sechdrs[i].sh_addr = (unsigned long)dest;
925 printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n",
926 secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr);
929 /* Fix up syms, so that st_value is a pointer to location. */
930 simplify_symbols(sechdrs, symindex, strtab, secstrings,
931 hdr->e_shnum, &mod);
933 /* Now do relocations. */
934 for (i = 1; i < hdr->e_shnum; i++) {
935 const char *strtab = (char *)sechdrs[strindex].sh_addr;
936 unsigned int info = sechdrs[i].sh_info;
938 /* Not a valid relocation section? */
939 if (info >= hdr->e_shnum)
940 continue;
942 /* Don't bother with non-allocated sections */
943 if (!(sechdrs[info].sh_flags & SHF_ALLOC))
944 continue;
946 if (sechdrs[i].sh_type == SHT_REL)
947 err = apply_relocations(sechdrs, strtab, symindex, i,
948 &mod);
949 else if (sechdrs[i].sh_type == SHT_RELA)
950 err = apply_relocate_add(sechdrs, strtab, symindex, i,
951 &mod);
952 if (err < 0)
953 return err;
956 } else {
957 struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
959 for (i = 0; i < hdr->e_phnum; i++) {
960 if (phdr->p_type == PT_LOAD) {
961 memcpy((void *)phdr->p_paddr,
962 (char *)hdr + phdr->p_offset,
963 phdr->p_filesz);
964 memset((void *)phdr->p_paddr + phdr->p_filesz,
965 0, phdr->p_memsz - phdr->p_filesz);
967 phdr++;
970 for (i = 0; i < hdr->e_shnum; i++) {
971 /* Internal symbols and strings. */
972 if (sechdrs[i].sh_type == SHT_SYMTAB) {
973 symindex = i;
974 strindex = sechdrs[i].sh_link;
975 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
977 /* mark the symtab's address for when we try to find the
978 magic symbols */
979 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
984 /* make sure it's physically written out */
985 flush_icache_range((unsigned long)v->load_addr,
986 (unsigned long)v->load_addr + v->len);
988 if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
989 if (v->__start == 0) {
990 printk(KERN_WARNING "VPE loader: program does not contain "
991 "a __start symbol\n");
992 return -ENOEXEC;
995 if (v->shared_ptr == NULL)
996 printk(KERN_WARNING "VPE loader: "
997 "program does not contain vpe_shared symbol.\n"
998 " Unable to use AMVP (AP/SP) facilities.\n");
1001 printk(" elf loaded\n");
1002 return 0;
1005 static void cleanup_tc(struct tc *tc)
1007 unsigned long flags;
1008 unsigned int mtflags, vpflags;
1009 int tmp;
1011 local_irq_save(flags);
1012 mtflags = dmt();
1013 vpflags = dvpe();
1014 /* Put MVPE's into 'configuration state' */
1015 set_c0_mvpcontrol(MVPCONTROL_VPC);
1017 settc(tc->index);
1018 tmp = read_tc_c0_tcstatus();
1020 /* mark not allocated and not dynamically allocatable */
1021 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1022 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1023 write_tc_c0_tcstatus(tmp);
1025 write_tc_c0_tchalt(TCHALT_H);
1026 mips_ihb();
1028 /* bind it to anything other than VPE1 */
1029 // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
1031 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1032 evpe(vpflags);
1033 emt(mtflags);
1034 local_irq_restore(flags);
1037 static int getcwd(char *buff, int size)
1039 mm_segment_t old_fs;
1040 int ret;
1042 old_fs = get_fs();
1043 set_fs(KERNEL_DS);
1045 ret = sys_getcwd(buff, size);
1047 set_fs(old_fs);
1049 return ret;
1052 /* checks VPE is unused and gets ready to load program */
1053 static int vpe_open(struct inode *inode, struct file *filp)
1055 enum vpe_state state;
1056 struct vpe_notifications *not;
1057 struct vpe *v;
1058 int ret;
1060 if (minor != iminor(inode)) {
1061 /* assume only 1 device at the moment. */
1062 pr_warning("VPE loader: only vpe1 is supported\n");
1064 return -ENODEV;
1067 if ((v = get_vpe(tclimit)) == NULL) {
1068 pr_warning("VPE loader: unable to get vpe\n");
1070 return -ENODEV;
1073 state = xchg(&v->state, VPE_STATE_INUSE);
1074 if (state != VPE_STATE_UNUSED) {
1075 printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
1077 list_for_each_entry(not, &v->notify, list) {
1078 not->stop(tclimit);
1081 release_progmem(v->load_addr);
1082 cleanup_tc(get_tc(tclimit));
1085 /* this of-course trashes what was there before... */
1086 v->pbuffer = vmalloc(P_SIZE);
1087 if (!v->pbuffer) {
1088 pr_warning("VPE loader: unable to allocate memory\n");
1089 return -ENOMEM;
1091 v->plen = P_SIZE;
1092 v->load_addr = NULL;
1093 v->len = 0;
1095 v->uid = filp->f_cred->fsuid;
1096 v->gid = filp->f_cred->fsgid;
1098 v->cwd[0] = 0;
1099 ret = getcwd(v->cwd, VPE_PATH_MAX);
1100 if (ret < 0)
1101 printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret);
1103 v->shared_ptr = NULL;
1104 v->__start = 0;
1106 return 0;
1109 static int vpe_release(struct inode *inode, struct file *filp)
1111 struct vpe *v;
1112 Elf_Ehdr *hdr;
1113 int ret = 0;
1115 v = get_vpe(tclimit);
1116 if (v == NULL)
1117 return -ENODEV;
1119 hdr = (Elf_Ehdr *) v->pbuffer;
1120 if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
1121 if (vpe_elfload(v) >= 0) {
1122 vpe_run(v);
1123 } else {
1124 printk(KERN_WARNING "VPE loader: ELF load failed.\n");
1125 ret = -ENOEXEC;
1127 } else {
1128 printk(KERN_WARNING "VPE loader: only elf files are supported\n");
1129 ret = -ENOEXEC;
1132 /* It's good to be able to run the SP and if it chokes have a look at
1133 the /dev/rt?. But if we reset the pointer to the shared struct we
1134 lose what has happened. So perhaps if garbage is sent to the vpe
1135 device, use it as a trigger for the reset. Hopefully a nice
1136 executable will be along shortly. */
1137 if (ret < 0)
1138 v->shared_ptr = NULL;
1140 vfree(v->pbuffer);
1141 v->plen = 0;
1143 return ret;
1146 static ssize_t vpe_write(struct file *file, const char __user * buffer,
1147 size_t count, loff_t * ppos)
1149 size_t ret = count;
1150 struct vpe *v;
1152 if (iminor(file->f_path.dentry->d_inode) != minor)
1153 return -ENODEV;
1155 v = get_vpe(tclimit);
1156 if (v == NULL)
1157 return -ENODEV;
1159 if ((count + v->len) > v->plen) {
1160 printk(KERN_WARNING
1161 "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
1162 return -ENOMEM;
1165 count -= copy_from_user(v->pbuffer + v->len, buffer, count);
1166 if (!count)
1167 return -EFAULT;
1169 v->len += count;
1170 return ret;
1173 static const struct file_operations vpe_fops = {
1174 .owner = THIS_MODULE,
1175 .open = vpe_open,
1176 .release = vpe_release,
1177 .write = vpe_write,
1178 .llseek = noop_llseek,
1181 /* module wrapper entry points */
1182 /* give me a vpe */
1183 vpe_handle vpe_alloc(void)
1185 int i;
1186 struct vpe *v;
1188 /* find a vpe */
1189 for (i = 1; i < MAX_VPES; i++) {
1190 if ((v = get_vpe(i)) != NULL) {
1191 v->state = VPE_STATE_INUSE;
1192 return v;
1195 return NULL;
1198 EXPORT_SYMBOL(vpe_alloc);
1200 /* start running from here */
1201 int vpe_start(vpe_handle vpe, unsigned long start)
1203 struct vpe *v = vpe;
1205 v->__start = start;
1206 return vpe_run(v);
1209 EXPORT_SYMBOL(vpe_start);
1211 /* halt it for now */
1212 int vpe_stop(vpe_handle vpe)
1214 struct vpe *v = vpe;
1215 struct tc *t;
1216 unsigned int evpe_flags;
1218 evpe_flags = dvpe();
1220 if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
1222 settc(t->index);
1223 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1226 evpe(evpe_flags);
1228 return 0;
1231 EXPORT_SYMBOL(vpe_stop);
1233 /* I've done with it thank you */
1234 int vpe_free(vpe_handle vpe)
1236 struct vpe *v = vpe;
1237 struct tc *t;
1238 unsigned int evpe_flags;
1240 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
1241 return -ENOEXEC;
1244 evpe_flags = dvpe();
1246 /* Put MVPE's into 'configuration state' */
1247 set_c0_mvpcontrol(MVPCONTROL_VPC);
1249 settc(t->index);
1250 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1252 /* halt the TC */
1253 write_tc_c0_tchalt(TCHALT_H);
1254 mips_ihb();
1256 /* mark the TC unallocated */
1257 write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
1259 v->state = VPE_STATE_UNUSED;
1261 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1262 evpe(evpe_flags);
1264 return 0;
1267 EXPORT_SYMBOL(vpe_free);
1269 void *vpe_get_shared(int index)
1271 struct vpe *v;
1273 if ((v = get_vpe(index)) == NULL)
1274 return NULL;
1276 return v->shared_ptr;
1279 EXPORT_SYMBOL(vpe_get_shared);
1281 int vpe_getuid(int index)
1283 struct vpe *v;
1285 if ((v = get_vpe(index)) == NULL)
1286 return -1;
1288 return v->uid;
1291 EXPORT_SYMBOL(vpe_getuid);
1293 int vpe_getgid(int index)
1295 struct vpe *v;
1297 if ((v = get_vpe(index)) == NULL)
1298 return -1;
1300 return v->gid;
1303 EXPORT_SYMBOL(vpe_getgid);
1305 int vpe_notify(int index, struct vpe_notifications *notify)
1307 struct vpe *v;
1309 if ((v = get_vpe(index)) == NULL)
1310 return -1;
1312 list_add(&notify->list, &v->notify);
1313 return 0;
1316 EXPORT_SYMBOL(vpe_notify);
1318 char *vpe_getcwd(int index)
1320 struct vpe *v;
1322 if ((v = get_vpe(index)) == NULL)
1323 return NULL;
1325 return v->cwd;
1328 EXPORT_SYMBOL(vpe_getcwd);
1330 static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
1331 const char *buf, size_t len)
1333 struct vpe *vpe = get_vpe(tclimit);
1334 struct vpe_notifications *not;
1336 list_for_each_entry(not, &vpe->notify, list) {
1337 not->stop(tclimit);
1340 release_progmem(vpe->load_addr);
1341 cleanup_tc(get_tc(tclimit));
1342 vpe_stop(vpe);
1343 vpe_free(vpe);
1345 return len;
1348 static ssize_t show_ntcs(struct device *cd, struct device_attribute *attr,
1349 char *buf)
1351 struct vpe *vpe = get_vpe(tclimit);
1353 return sprintf(buf, "%d\n", vpe->ntcs);
1356 static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
1357 const char *buf, size_t len)
1359 struct vpe *vpe = get_vpe(tclimit);
1360 unsigned long new;
1361 char *endp;
1363 new = simple_strtoul(buf, &endp, 0);
1364 if (endp == buf)
1365 goto out_einval;
1367 if (new == 0 || new > (hw_tcs - tclimit))
1368 goto out_einval;
1370 vpe->ntcs = new;
1372 return len;
1374 out_einval:
1375 return -EINVAL;
1378 static struct device_attribute vpe_class_attributes[] = {
1379 __ATTR(kill, S_IWUSR, NULL, store_kill),
1380 __ATTR(ntcs, S_IRUGO | S_IWUSR, show_ntcs, store_ntcs),
1384 static void vpe_device_release(struct device *cd)
1386 kfree(cd);
1389 struct class vpe_class = {
1390 .name = "vpe",
1391 .owner = THIS_MODULE,
1392 .dev_release = vpe_device_release,
1393 .dev_attrs = vpe_class_attributes,
1396 struct device vpe_device;
1398 static int __init vpe_module_init(void)
1400 unsigned int mtflags, vpflags;
1401 unsigned long flags, val;
1402 struct vpe *v = NULL;
1403 struct tc *t;
1404 int tc, err;
1406 if (!cpu_has_mipsmt) {
1407 printk("VPE loader: not a MIPS MT capable processor\n");
1408 return -ENODEV;
1411 if (vpelimit == 0) {
1412 printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
1413 "initializing VPE loader.\nPass maxvpes=<n> argument as "
1414 "kernel argument\n");
1416 return -ENODEV;
1419 if (tclimit == 0) {
1420 printk(KERN_WARNING "No TCs reserved for AP/SP, not "
1421 "initializing VPE loader.\nPass maxtcs=<n> argument as "
1422 "kernel argument\n");
1424 return -ENODEV;
1427 major = register_chrdev(0, module_name, &vpe_fops);
1428 if (major < 0) {
1429 printk("VPE loader: unable to register character device\n");
1430 return major;
1433 err = class_register(&vpe_class);
1434 if (err) {
1435 printk(KERN_ERR "vpe_class registration failed\n");
1436 goto out_chrdev;
1439 device_initialize(&vpe_device);
1440 vpe_device.class = &vpe_class,
1441 vpe_device.parent = NULL,
1442 dev_set_name(&vpe_device, "vpe1");
1443 vpe_device.devt = MKDEV(major, minor);
1444 err = device_add(&vpe_device);
1445 if (err) {
1446 printk(KERN_ERR "Adding vpe_device failed\n");
1447 goto out_class;
1450 local_irq_save(flags);
1451 mtflags = dmt();
1452 vpflags = dvpe();
1454 /* Put MVPE's into 'configuration state' */
1455 set_c0_mvpcontrol(MVPCONTROL_VPC);
1457 /* dump_mtregs(); */
1459 val = read_c0_mvpconf0();
1460 hw_tcs = (val & MVPCONF0_PTC) + 1;
1461 hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
1463 for (tc = tclimit; tc < hw_tcs; tc++) {
1465 * Must re-enable multithreading temporarily or in case we
1466 * reschedule send IPIs or similar we might hang.
1468 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1469 evpe(vpflags);
1470 emt(mtflags);
1471 local_irq_restore(flags);
1472 t = alloc_tc(tc);
1473 if (!t) {
1474 err = -ENOMEM;
1475 goto out;
1478 local_irq_save(flags);
1479 mtflags = dmt();
1480 vpflags = dvpe();
1481 set_c0_mvpcontrol(MVPCONTROL_VPC);
1483 /* VPE's */
1484 if (tc < hw_tcs) {
1485 settc(tc);
1487 if ((v = alloc_vpe(tc)) == NULL) {
1488 printk(KERN_WARNING "VPE: unable to allocate VPE\n");
1490 goto out_reenable;
1493 v->ntcs = hw_tcs - tclimit;
1495 /* add the tc to the list of this vpe's tc's. */
1496 list_add(&t->tc, &v->tc);
1498 /* deactivate all but vpe0 */
1499 if (tc >= tclimit) {
1500 unsigned long tmp = read_vpe_c0_vpeconf0();
1502 tmp &= ~VPECONF0_VPA;
1504 /* master VPE */
1505 tmp |= VPECONF0_MVP;
1506 write_vpe_c0_vpeconf0(tmp);
1509 /* disable multi-threading with TC's */
1510 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
1512 if (tc >= vpelimit) {
1514 * Set config to be the same as vpe0,
1515 * particularly kseg0 coherency alg
1517 write_vpe_c0_config(read_c0_config());
1521 /* TC's */
1522 t->pvpe = v; /* set the parent vpe */
1524 if (tc >= tclimit) {
1525 unsigned long tmp;
1527 settc(tc);
1529 /* Any TC that is bound to VPE0 gets left as is - in case
1530 we are running SMTC on VPE0. A TC that is bound to any
1531 other VPE gets bound to VPE0, ideally I'd like to make
1532 it homeless but it doesn't appear to let me bind a TC
1533 to a non-existent VPE. Which is perfectly reasonable.
1535 The (un)bound state is visible to an EJTAG probe so may
1536 notify GDB...
1539 if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) {
1540 /* tc is bound >vpe0 */
1541 write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
1543 t->pvpe = get_vpe(0); /* set the parent vpe */
1546 /* halt the TC */
1547 write_tc_c0_tchalt(TCHALT_H);
1548 mips_ihb();
1550 tmp = read_tc_c0_tcstatus();
1552 /* mark not activated and not dynamically allocatable */
1553 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1554 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1555 write_tc_c0_tcstatus(tmp);
1559 out_reenable:
1560 /* release config state */
1561 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1563 evpe(vpflags);
1564 emt(mtflags);
1565 local_irq_restore(flags);
1567 return 0;
1569 out_class:
1570 class_unregister(&vpe_class);
1571 out_chrdev:
1572 unregister_chrdev(major, module_name);
1574 out:
1575 return err;
1578 static void __exit vpe_module_exit(void)
1580 struct vpe *v, *n;
1582 device_del(&vpe_device);
1583 unregister_chrdev(major, module_name);
1585 /* No locking needed here */
1586 list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
1587 if (v->state != VPE_STATE_UNUSED)
1588 release_vpe(v);
1592 module_init(vpe_module_init);
1593 module_exit(vpe_module_exit);
1594 MODULE_DESCRIPTION("MIPS VPE Loader");
1595 MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
1596 MODULE_LICENSE("GPL");