hyperv: Remove recv_pkt_list and lock
[linux/fpc-iii.git] / drivers / mtd / bcm47xxpart.c
blobadfa74c1bc45077e12fe78c1601b74923834fdec
1 /*
2 * BCM47XX MTD partitioning
4 * Copyright © 2012 Rafał Miłecki <zajec5@gmail.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/mtd/mtd.h>
16 #include <linux/mtd/partitions.h>
18 /* 10 parts were found on sflash on Netgear WNDR4500 */
19 #define BCM47XXPART_MAX_PARTS 12
22 * Amount of bytes we read when analyzing each block of flash memory.
23 * Set it big enough to allow detecting partition and reading important data.
25 #define BCM47XXPART_BYTES_TO_READ 0x4e8
27 /* Magics */
28 #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
29 #define BOARD_DATA_MAGIC2 0xBD0D0BBD
30 #define CFE_MAGIC 0x43464531 /* 1EFC */
31 #define FACTORY_MAGIC 0x59544346 /* FCTY */
32 #define NVRAM_HEADER 0x48534C46 /* FLSH */
33 #define POT_MAGIC1 0x54544f50 /* POTT */
34 #define POT_MAGIC2 0x504f /* OP */
35 #define ML_MAGIC1 0x39685a42
36 #define ML_MAGIC2 0x26594131
37 #define TRX_MAGIC 0x30524448
38 #define SQSH_MAGIC 0x71736873 /* shsq */
40 struct trx_header {
41 uint32_t magic;
42 uint32_t length;
43 uint32_t crc32;
44 uint16_t flags;
45 uint16_t version;
46 uint32_t offset[3];
47 } __packed;
49 static void bcm47xxpart_add_part(struct mtd_partition *part, char *name,
50 u64 offset, uint32_t mask_flags)
52 part->name = name;
53 part->offset = offset;
54 part->mask_flags = mask_flags;
57 static int bcm47xxpart_parse(struct mtd_info *master,
58 struct mtd_partition **pparts,
59 struct mtd_part_parser_data *data)
61 struct mtd_partition *parts;
62 uint8_t i, curr_part = 0;
63 uint32_t *buf;
64 size_t bytes_read;
65 uint32_t offset;
66 uint32_t blocksize = master->erasesize;
67 struct trx_header *trx;
68 int trx_part = -1;
69 int last_trx_part = -1;
70 int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
72 if (blocksize <= 0x10000)
73 blocksize = 0x10000;
75 /* Alloc */
76 parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
77 GFP_KERNEL);
78 if (!parts)
79 return -ENOMEM;
81 buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
82 if (!buf) {
83 kfree(parts);
84 return -ENOMEM;
87 /* Parse block by block looking for magics */
88 for (offset = 0; offset <= master->size - blocksize;
89 offset += blocksize) {
90 /* Nothing more in higher memory */
91 if (offset >= 0x2000000)
92 break;
94 if (curr_part >= BCM47XXPART_MAX_PARTS) {
95 pr_warn("Reached maximum number of partitions, scanning stopped!\n");
96 break;
99 /* Read beginning of the block */
100 if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
101 &bytes_read, (uint8_t *)buf) < 0) {
102 pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
103 offset);
104 continue;
107 /* Magic or small NVRAM at 0x400 */
108 if ((buf[0x4e0 / 4] == CFE_MAGIC && buf[0x4e4 / 4] == CFE_MAGIC) ||
109 (buf[0x400 / 4] == NVRAM_HEADER)) {
110 bcm47xxpart_add_part(&parts[curr_part++], "boot",
111 offset, MTD_WRITEABLE);
112 continue;
116 * board_data starts with board_id which differs across boards,
117 * but we can use 'MPFR' (hopefully) magic at 0x100
119 if (buf[0x100 / 4] == BOARD_DATA_MAGIC) {
120 bcm47xxpart_add_part(&parts[curr_part++], "board_data",
121 offset, MTD_WRITEABLE);
122 continue;
125 /* Found on Huawei E970 */
126 if (buf[0x000 / 4] == FACTORY_MAGIC) {
127 bcm47xxpart_add_part(&parts[curr_part++], "factory",
128 offset, MTD_WRITEABLE);
129 continue;
132 /* POT(TOP) */
133 if (buf[0x000 / 4] == POT_MAGIC1 &&
134 (buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) {
135 bcm47xxpart_add_part(&parts[curr_part++], "POT", offset,
136 MTD_WRITEABLE);
137 continue;
140 /* ML */
141 if (buf[0x010 / 4] == ML_MAGIC1 &&
142 buf[0x014 / 4] == ML_MAGIC2) {
143 bcm47xxpart_add_part(&parts[curr_part++], "ML", offset,
144 MTD_WRITEABLE);
145 continue;
148 /* TRX */
149 if (buf[0x000 / 4] == TRX_MAGIC) {
150 if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
151 pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
152 break;
155 trx = (struct trx_header *)buf;
157 trx_part = curr_part;
158 bcm47xxpart_add_part(&parts[curr_part++], "firmware",
159 offset, 0);
161 i = 0;
162 /* We have LZMA loader if offset[2] points to sth */
163 if (trx->offset[2]) {
164 bcm47xxpart_add_part(&parts[curr_part++],
165 "loader",
166 offset + trx->offset[i],
168 i++;
171 bcm47xxpart_add_part(&parts[curr_part++], "linux",
172 offset + trx->offset[i], 0);
173 i++;
176 * Pure rootfs size is known and can be calculated as:
177 * trx->length - trx->offset[i]. We don't fill it as
178 * we want to have jffs2 (overlay) in the same mtd.
180 bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
181 offset + trx->offset[i], 0);
182 i++;
184 last_trx_part = curr_part - 1;
187 * We have whole TRX scanned, skip to the next part. Use
188 * roundown (not roundup), as the loop will increase
189 * offset in next step.
191 offset = rounddown(offset + trx->length, blocksize);
192 continue;
195 /* Squashfs on devices not using TRX */
196 if (buf[0x000 / 4] == SQSH_MAGIC) {
197 bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
198 offset, 0);
199 continue;
202 /* Read middle of the block */
203 if (mtd_read(master, offset + 0x8000, 0x4,
204 &bytes_read, (uint8_t *)buf) < 0) {
205 pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
206 offset);
207 continue;
210 /* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */
211 if (buf[0x000 / 4] == BOARD_DATA_MAGIC2) {
212 bcm47xxpart_add_part(&parts[curr_part++], "board_data",
213 offset, MTD_WRITEABLE);
214 continue;
218 /* Look for NVRAM at the end of the last block. */
219 for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
220 if (curr_part >= BCM47XXPART_MAX_PARTS) {
221 pr_warn("Reached maximum number of partitions, scanning stopped!\n");
222 break;
225 offset = master->size - possible_nvram_sizes[i];
226 if (mtd_read(master, offset, 0x4, &bytes_read,
227 (uint8_t *)buf) < 0) {
228 pr_err("mtd_read error while reading at offset 0x%X!\n",
229 offset);
230 continue;
233 /* Standard NVRAM */
234 if (buf[0] == NVRAM_HEADER) {
235 bcm47xxpart_add_part(&parts[curr_part++], "nvram",
236 master->size - blocksize, 0);
237 break;
241 kfree(buf);
244 * Assume that partitions end at the beginning of the one they are
245 * followed by.
247 for (i = 0; i < curr_part; i++) {
248 u64 next_part_offset = (i < curr_part - 1) ?
249 parts[i + 1].offset : master->size;
251 parts[i].size = next_part_offset - parts[i].offset;
252 if (i == last_trx_part && trx_part >= 0)
253 parts[trx_part].size = next_part_offset -
254 parts[trx_part].offset;
257 *pparts = parts;
258 return curr_part;
261 static struct mtd_part_parser bcm47xxpart_mtd_parser = {
262 .owner = THIS_MODULE,
263 .parse_fn = bcm47xxpart_parse,
264 .name = "bcm47xxpart",
267 static int __init bcm47xxpart_init(void)
269 register_mtd_parser(&bcm47xxpart_mtd_parser);
270 return 0;
273 static void __exit bcm47xxpart_exit(void)
275 deregister_mtd_parser(&bcm47xxpart_mtd_parser);
278 module_init(bcm47xxpart_init);
279 module_exit(bcm47xxpart_exit);
281 MODULE_LICENSE("GPL");
282 MODULE_DESCRIPTION("MTD partitioning for BCM47XX flash memories");