6 * Must be one of the following:
10 * And, optionally, one of the vendor specific compatible:
11 + allwinner,sun4i-a10-mali
12 + allwinner,sun7i-a20-mali
13 + allwinner,sun50i-h5-mali
14 + amlogic,meson-gxbb-mali
15 + amlogic,meson-gxl-mali
16 + stericsson,db8500-mali
18 - reg: Physical base address and length of the GPU registers
20 - interrupts: an entry for each entry in interrupt-names.
21 See ../interrupt-controller/interrupts.txt for details.
24 * ppX: Pixel Processor X interrupt (X from 0 to 7)
25 * ppmmuX: Pixel Processor X MMU interrupt (X from 0 to 7)
26 * pp: Pixel Processor broadcast interrupt (mali-450 only)
27 * gp: Geometry Processor interrupt
28 * gpmmu: Geometry Processor MMU interrupt
30 - clocks: an entry for each entry in clock-names
32 * bus: bus clock for the GPU
33 * core: clock driving the GPU itself
36 - interrupt-names and interrupts:
37 * pmu: Power Management Unit interrupt, if implemented in hardware
40 Memory region to allocate from, as defined in
41 Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
43 - operating-points-v2:
44 Operating Points for the GPU, as defined in
45 Documentation/devicetree/bindings/opp/opp.txt
47 Vendor-specific bindings
48 ------------------------
50 The Mali GPU is integrated very differently from one SoC to
51 another. In order to accomodate those differences, you have the option
52 to specify one more vendor-specific compatible, among:
54 - allwinner,sun4i-a10-mali
56 * resets: phandle to the reset line for the GPU
58 - allwinner,sun7i-a20-mali
60 * resets: phandle to the reset line for the GPU
62 - allwinner,sun50i-h5-mali
64 * resets: phandle to the reset line for the GPU
66 - stericsson,db8500-mali
68 * interrupt-names and interrupts:
69 + combined: combined interrupt of all of the above lines
74 compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
75 reg = <0x01c40000 0x10000>;
76 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
77 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
78 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
79 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
80 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
81 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
82 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
83 interrupt-names = "gp",
90 clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
91 clock-names = "bus", "core";
92 resets = <&ccu RST_BUS_GPU>;