?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ocfs2: avoid inode removal while nfsd is accessing it
[linux/fpc-iii.git] / drivers / regulator / bd71828-regulator.c
blob85c0b900096393332c817b3ff46d4f9b0391a9a6
1 // SPDX-License-Identifier: GPL-2.0-only
2 // Copyright (C) 2019 ROHM Semiconductors
3 // bd71828-regulator.c ROHM BD71828GW-DS1 regulator driver
4 //
5
6 #include <linux/delay.h>
7 #include <linux/err.h>
8 #include <linux/gpio.h>
9 #include <linux/interrupt.h>
10 #include <linux/kernel.h>
11 #include <linux/mfd/rohm-bd71828.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/platform_device.h>
15 #include <linux/regmap.h>
16 #include <linux/regulator/driver.h>
17 #include <linux/regulator/machine.h>
18 #include <linux/regulator/of_regulator.h>
19
20 struct reg_init {
21 unsigned int reg;
22 unsigned int mask;
23 unsigned int val;
24 };
25 struct bd71828_regulator_data {
26 struct regulator_desc desc;
27 const struct rohm_dvs_config dvs;
28 const struct reg_init *reg_inits;
29 int reg_init_amnt;
30 };
31
32 static const struct reg_init buck1_inits[] = {
33 /*
34 * DVS Buck voltages can be changed by register values or via GPIO.
35 * Use register accesses by default.
36 */
37 {
38 .reg = BD71828_REG_PS_CTRL_1,
39 .mask = BD71828_MASK_DVS_BUCK1_CTRL,
40 .val = BD71828_DVS_BUCK1_CTRL_I2C,
41 },
42 };
43
44 static const struct reg_init buck2_inits[] = {
45 {
46 .reg = BD71828_REG_PS_CTRL_1,
47 .mask = BD71828_MASK_DVS_BUCK2_CTRL,
48 .val = BD71828_DVS_BUCK2_CTRL_I2C,
49 },
50 };
51
52 static const struct reg_init buck6_inits[] = {
53 {
54 .reg = BD71828_REG_PS_CTRL_1,
55 .mask = BD71828_MASK_DVS_BUCK6_CTRL,
56 .val = BD71828_DVS_BUCK6_CTRL_I2C,
57 },
58 };
59
60 static const struct reg_init buck7_inits[] = {
61 {
62 .reg = BD71828_REG_PS_CTRL_1,
63 .mask = BD71828_MASK_DVS_BUCK7_CTRL,
64 .val = BD71828_DVS_BUCK7_CTRL_I2C,
65 },
66 };
67
68 static const struct linear_range bd71828_buck1267_volts[] = {
69 REGULATOR_LINEAR_RANGE(500000, 0x00, 0xef, 6250),
70 REGULATOR_LINEAR_RANGE(2000000, 0xf0, 0xff, 0),
71 };
72
73 static const struct linear_range bd71828_buck3_volts[] = {
74 REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x0f, 50000),
75 REGULATOR_LINEAR_RANGE(2000000, 0x10, 0x1f, 0),
76 };
77
78 static const struct linear_range bd71828_buck4_volts[] = {
79 REGULATOR_LINEAR_RANGE(1000000, 0x00, 0x1f, 25000),
80 REGULATOR_LINEAR_RANGE(1800000, 0x20, 0x3f, 0),
81 };
82
83 static const struct linear_range bd71828_buck5_volts[] = {
84 REGULATOR_LINEAR_RANGE(2500000, 0x00, 0x0f, 50000),
85 REGULATOR_LINEAR_RANGE(3300000, 0x10, 0x1f, 0),
86 };
87
88 static const struct linear_range bd71828_ldo_volts[] = {
89 REGULATOR_LINEAR_RANGE(800000, 0x00, 0x31, 50000),
90 REGULATOR_LINEAR_RANGE(3300000, 0x32, 0x3f, 0),
91 };
92
93 static int bd71828_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
94 {
95 unsigned int val;
96
97 switch (ramp_delay) {
98 case 1 ... 2500:
99 val = 0;
100 break;
101 case 2501 ... 5000:
102 val = 1;
103 break;
104 case 5001 ... 10000:
105 val = 2;
106 break;
107 case 10001 ... 20000:
108 val = 3;
109 break;
110 default:
111 val = 3;
112 dev_err(&rdev->dev,
113 "ramp_delay: %d not supported, setting 20mV/uS",
114 ramp_delay);
115 }
116
117 /*
118 * On BD71828 the ramp delay level control reg is at offset +2 to
119 * enable reg
120 */
121 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg + 2,
122 BD71828_MASK_RAMP_DELAY,
123 val << (ffs(BD71828_MASK_RAMP_DELAY) - 1));
124 }
125
126 static int buck_set_hw_dvs_levels(struct device_node *np,
127 const struct regulator_desc *desc,
128 struct regulator_config *cfg)
129 {
130 struct bd71828_regulator_data *data;
131
132 data = container_of(desc, struct bd71828_regulator_data, desc);
133
134 return rohm_regulator_set_dvs_levels(&data->dvs, np, desc, cfg->regmap);
135 }
136
137 static int ldo6_parse_dt(struct device_node *np,
138 const struct regulator_desc *desc,
139 struct regulator_config *cfg)
140 {
141 int ret, i;
142 uint32_t uv = 0;
143 unsigned int en;
144 struct regmap *regmap = cfg->regmap;
145 static const char * const props[] = { "rohm,dvs-run-voltage",
146 "rohm,dvs-idle-voltage",
147 "rohm,dvs-suspend-voltage",
148 "rohm,dvs-lpsr-voltage" };
149 unsigned int mask[] = { BD71828_MASK_RUN_EN, BD71828_MASK_IDLE_EN,
150 BD71828_MASK_SUSP_EN, BD71828_MASK_LPSR_EN };
151
152 for (i = 0; i < ARRAY_SIZE(props); i++) {
153 ret = of_property_read_u32(np, props[i], &uv);
154 if (ret) {
155 if (ret != -EINVAL)
156 return ret;
157 continue;
158 }
159 if (uv)
160 en = 0xffffffff;
161 else
162 en = 0;
163
164 ret = regmap_update_bits(regmap, desc->enable_reg, mask[i], en);
165 if (ret)
166 return ret;
167 }
168 return 0;
169 }
170
171 static const struct regulator_ops bd71828_buck_ops = {
172 .enable = regulator_enable_regmap,
173 .disable = regulator_disable_regmap,
174 .is_enabled = regulator_is_enabled_regmap,
175 .list_voltage = regulator_list_voltage_linear_range,
176 .set_voltage_sel = regulator_set_voltage_sel_regmap,
177 .get_voltage_sel = regulator_get_voltage_sel_regmap,
178 };
179
180 static const struct regulator_ops bd71828_dvs_buck_ops = {
181 .enable = regulator_enable_regmap,
182 .disable = regulator_disable_regmap,
183 .is_enabled = regulator_is_enabled_regmap,
184 .list_voltage = regulator_list_voltage_linear_range,
185 .set_voltage_sel = regulator_set_voltage_sel_regmap,
186 .get_voltage_sel = regulator_get_voltage_sel_regmap,
187 .set_voltage_time_sel = regulator_set_voltage_time_sel,
188 .set_ramp_delay = bd71828_set_ramp_delay,
189 };
190
191 static const struct regulator_ops bd71828_ldo_ops = {
192 .enable = regulator_enable_regmap,
193 .disable = regulator_disable_regmap,
194 .is_enabled = regulator_is_enabled_regmap,
195 .list_voltage = regulator_list_voltage_linear_range,
196 .set_voltage_sel = regulator_set_voltage_sel_regmap,
197 .get_voltage_sel = regulator_get_voltage_sel_regmap,
198 };
199
200 static const struct regulator_ops bd71828_ldo6_ops = {
201 .enable = regulator_enable_regmap,
202 .disable = regulator_disable_regmap,
203 .is_enabled = regulator_is_enabled_regmap,
204 };
205
206 static const struct bd71828_regulator_data bd71828_rdata[] = {
207 {
208 .desc = {
209 .name = "buck1",
210 .of_match = of_match_ptr("BUCK1"),
211 .regulators_node = of_match_ptr("regulators"),
212 .id = BD71828_BUCK1,
213 .ops = &bd71828_dvs_buck_ops,
214 .type = REGULATOR_VOLTAGE,
215 .linear_ranges = bd71828_buck1267_volts,
216 .n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
217 .n_voltages = BD71828_BUCK1267_VOLTS,
218 .enable_reg = BD71828_REG_BUCK1_EN,
219 .enable_mask = BD71828_MASK_RUN_EN,
220 .vsel_reg = BD71828_REG_BUCK1_VOLT,
221 .vsel_mask = BD71828_MASK_BUCK1267_VOLT,
222 .owner = THIS_MODULE,
223 .of_parse_cb = buck_set_hw_dvs_levels,
224 },
225 .dvs = {
226 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
227 ROHM_DVS_LEVEL_SUSPEND |
228 ROHM_DVS_LEVEL_LPSR,
229 .run_reg = BD71828_REG_BUCK1_VOLT,
230 .run_mask = BD71828_MASK_BUCK1267_VOLT,
231 .idle_reg = BD71828_REG_BUCK1_IDLE_VOLT,
232 .idle_mask = BD71828_MASK_BUCK1267_VOLT,
233 .idle_on_mask = BD71828_MASK_IDLE_EN,
234 .suspend_reg = BD71828_REG_BUCK1_SUSP_VOLT,
235 .suspend_mask = BD71828_MASK_BUCK1267_VOLT,
236 .suspend_on_mask = BD71828_MASK_SUSP_EN,
237 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
238 /*
239 * LPSR voltage is same as SUSPEND voltage. Allow
240 * setting it so that regulator can be set enabled at
241 * LPSR state
242 */
243 .lpsr_reg = BD71828_REG_BUCK1_SUSP_VOLT,
244 .lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
245 },
246 .reg_inits = buck1_inits,
247 .reg_init_amnt = ARRAY_SIZE(buck1_inits),
248 },
249 {
250 .desc = {
251 .name = "buck2",
252 .of_match = of_match_ptr("BUCK2"),
253 .regulators_node = of_match_ptr("regulators"),
254 .id = BD71828_BUCK2,
255 .ops = &bd71828_dvs_buck_ops,
256 .type = REGULATOR_VOLTAGE,
257 .linear_ranges = bd71828_buck1267_volts,
258 .n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
259 .n_voltages = BD71828_BUCK1267_VOLTS,
260 .enable_reg = BD71828_REG_BUCK2_EN,
261 .enable_mask = BD71828_MASK_RUN_EN,
262 .vsel_reg = BD71828_REG_BUCK2_VOLT,
263 .vsel_mask = BD71828_MASK_BUCK1267_VOLT,
264 .owner = THIS_MODULE,
265 .of_parse_cb = buck_set_hw_dvs_levels,
266 },
267 .dvs = {
268 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
269 ROHM_DVS_LEVEL_SUSPEND |
270 ROHM_DVS_LEVEL_LPSR,
271 .run_reg = BD71828_REG_BUCK2_VOLT,
272 .run_mask = BD71828_MASK_BUCK1267_VOLT,
273 .idle_reg = BD71828_REG_BUCK2_IDLE_VOLT,
274 .idle_mask = BD71828_MASK_BUCK1267_VOLT,
275 .idle_on_mask = BD71828_MASK_IDLE_EN,
276 .suspend_reg = BD71828_REG_BUCK2_SUSP_VOLT,
277 .suspend_mask = BD71828_MASK_BUCK1267_VOLT,
278 .suspend_on_mask = BD71828_MASK_SUSP_EN,
279 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
280 .lpsr_reg = BD71828_REG_BUCK2_SUSP_VOLT,
281 .lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
282 },
283 .reg_inits = buck2_inits,
284 .reg_init_amnt = ARRAY_SIZE(buck2_inits),
285 },
286 {
287 .desc = {
288 .name = "buck3",
289 .of_match = of_match_ptr("BUCK3"),
290 .regulators_node = of_match_ptr("regulators"),
291 .id = BD71828_BUCK3,
292 .ops = &bd71828_buck_ops,
293 .type = REGULATOR_VOLTAGE,
294 .linear_ranges = bd71828_buck3_volts,
295 .n_linear_ranges = ARRAY_SIZE(bd71828_buck3_volts),
296 .n_voltages = BD71828_BUCK3_VOLTS,
297 .enable_reg = BD71828_REG_BUCK3_EN,
298 .enable_mask = BD71828_MASK_RUN_EN,
299 .vsel_reg = BD71828_REG_BUCK3_VOLT,
300 .vsel_mask = BD71828_MASK_BUCK3_VOLT,
301 .owner = THIS_MODULE,
302 .of_parse_cb = buck_set_hw_dvs_levels,
303 },
304 .dvs = {
305 /*
306 * BUCK3 only supports single voltage for all states.
307 * voltage can be individually enabled for each state
308 * though => allow setting all states to support
309 * enabling power rail on different states.
310 */
311 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
312 ROHM_DVS_LEVEL_SUSPEND |
313 ROHM_DVS_LEVEL_LPSR,
314 .run_reg = BD71828_REG_BUCK3_VOLT,
315 .idle_reg = BD71828_REG_BUCK3_VOLT,
316 .suspend_reg = BD71828_REG_BUCK3_VOLT,
317 .lpsr_reg = BD71828_REG_BUCK3_VOLT,
318 .run_mask = BD71828_MASK_BUCK3_VOLT,
319 .idle_mask = BD71828_MASK_BUCK3_VOLT,
320 .suspend_mask = BD71828_MASK_BUCK3_VOLT,
321 .lpsr_mask = BD71828_MASK_BUCK3_VOLT,
322 .idle_on_mask = BD71828_MASK_IDLE_EN,
323 .suspend_on_mask = BD71828_MASK_SUSP_EN,
324 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
325 },
326 },
327 {
328 .desc = {
329 .name = "buck4",
330 .of_match = of_match_ptr("BUCK4"),
331 .regulators_node = of_match_ptr("regulators"),
332 .id = BD71828_BUCK4,
333 .ops = &bd71828_buck_ops,
334 .type = REGULATOR_VOLTAGE,
335 .linear_ranges = bd71828_buck4_volts,
336 .n_linear_ranges = ARRAY_SIZE(bd71828_buck4_volts),
337 .n_voltages = BD71828_BUCK4_VOLTS,
338 .enable_reg = BD71828_REG_BUCK4_EN,
339 .enable_mask = BD71828_MASK_RUN_EN,
340 .vsel_reg = BD71828_REG_BUCK4_VOLT,
341 .vsel_mask = BD71828_MASK_BUCK4_VOLT,
342 .owner = THIS_MODULE,
343 .of_parse_cb = buck_set_hw_dvs_levels,
344 },
345 .dvs = {
346 /*
347 * BUCK4 only supports single voltage for all states.
348 * voltage can be individually enabled for each state
349 * though => allow setting all states to support
350 * enabling power rail on different states.
351 */
352 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
353 ROHM_DVS_LEVEL_SUSPEND |
354 ROHM_DVS_LEVEL_LPSR,
355 .run_reg = BD71828_REG_BUCK4_VOLT,
356 .idle_reg = BD71828_REG_BUCK4_VOLT,
357 .suspend_reg = BD71828_REG_BUCK4_VOLT,
358 .lpsr_reg = BD71828_REG_BUCK4_VOLT,
359 .run_mask = BD71828_MASK_BUCK4_VOLT,
360 .idle_mask = BD71828_MASK_BUCK4_VOLT,
361 .suspend_mask = BD71828_MASK_BUCK4_VOLT,
362 .lpsr_mask = BD71828_MASK_BUCK4_VOLT,
363 .idle_on_mask = BD71828_MASK_IDLE_EN,
364 .suspend_on_mask = BD71828_MASK_SUSP_EN,
365 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
366 },
367 },
368 {
369 .desc = {
370 .name = "buck5",
371 .of_match = of_match_ptr("BUCK5"),
372 .regulators_node = of_match_ptr("regulators"),
373 .id = BD71828_BUCK5,
374 .ops = &bd71828_buck_ops,
375 .type = REGULATOR_VOLTAGE,
376 .linear_ranges = bd71828_buck5_volts,
377 .n_linear_ranges = ARRAY_SIZE(bd71828_buck5_volts),
378 .n_voltages = BD71828_BUCK5_VOLTS,
379 .enable_reg = BD71828_REG_BUCK5_EN,
380 .enable_mask = BD71828_MASK_RUN_EN,
381 .vsel_reg = BD71828_REG_BUCK5_VOLT,
382 .vsel_mask = BD71828_MASK_BUCK5_VOLT,
383 .owner = THIS_MODULE,
384 .of_parse_cb = buck_set_hw_dvs_levels,
385 },
386 .dvs = {
387 /*
388 * BUCK5 only supports single voltage for all states.
389 * voltage can be individually enabled for each state
390 * though => allow setting all states to support
391 * enabling power rail on different states.
392 */
393 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
394 ROHM_DVS_LEVEL_SUSPEND |
395 ROHM_DVS_LEVEL_LPSR,
396 .run_reg = BD71828_REG_BUCK5_VOLT,
397 .idle_reg = BD71828_REG_BUCK5_VOLT,
398 .suspend_reg = BD71828_REG_BUCK5_VOLT,
399 .lpsr_reg = BD71828_REG_BUCK5_VOLT,
400 .run_mask = BD71828_MASK_BUCK5_VOLT,
401 .idle_mask = BD71828_MASK_BUCK5_VOLT,
402 .suspend_mask = BD71828_MASK_BUCK5_VOLT,
403 .lpsr_mask = BD71828_MASK_BUCK5_VOLT,
404 .idle_on_mask = BD71828_MASK_IDLE_EN,
405 .suspend_on_mask = BD71828_MASK_SUSP_EN,
406 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
407 },
408 },
409 {
410 .desc = {
411 .name = "buck6",
412 .of_match = of_match_ptr("BUCK6"),
413 .regulators_node = of_match_ptr("regulators"),
414 .id = BD71828_BUCK6,
415 .ops = &bd71828_dvs_buck_ops,
416 .type = REGULATOR_VOLTAGE,
417 .linear_ranges = bd71828_buck1267_volts,
418 .n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
419 .n_voltages = BD71828_BUCK1267_VOLTS,
420 .enable_reg = BD71828_REG_BUCK6_EN,
421 .enable_mask = BD71828_MASK_RUN_EN,
422 .vsel_reg = BD71828_REG_BUCK6_VOLT,
423 .vsel_mask = BD71828_MASK_BUCK1267_VOLT,
424 .owner = THIS_MODULE,
425 .of_parse_cb = buck_set_hw_dvs_levels,
426 },
427 .dvs = {
428 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
429 ROHM_DVS_LEVEL_SUSPEND |
430 ROHM_DVS_LEVEL_LPSR,
431 .run_reg = BD71828_REG_BUCK6_VOLT,
432 .run_mask = BD71828_MASK_BUCK1267_VOLT,
433 .idle_reg = BD71828_REG_BUCK6_IDLE_VOLT,
434 .idle_mask = BD71828_MASK_BUCK1267_VOLT,
435 .idle_on_mask = BD71828_MASK_IDLE_EN,
436 .suspend_reg = BD71828_REG_BUCK6_SUSP_VOLT,
437 .suspend_mask = BD71828_MASK_BUCK1267_VOLT,
438 .suspend_on_mask = BD71828_MASK_SUSP_EN,
439 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
440 .lpsr_reg = BD71828_REG_BUCK6_SUSP_VOLT,
441 .lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
442 },
443 .reg_inits = buck6_inits,
444 .reg_init_amnt = ARRAY_SIZE(buck6_inits),
445 },
446 {
447 .desc = {
448 .name = "buck7",
449 .of_match = of_match_ptr("BUCK7"),
450 .regulators_node = of_match_ptr("regulators"),
451 .id = BD71828_BUCK7,
452 .ops = &bd71828_dvs_buck_ops,
453 .type = REGULATOR_VOLTAGE,
454 .linear_ranges = bd71828_buck1267_volts,
455 .n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
456 .n_voltages = BD71828_BUCK1267_VOLTS,
457 .enable_reg = BD71828_REG_BUCK7_EN,
458 .enable_mask = BD71828_MASK_RUN_EN,
459 .vsel_reg = BD71828_REG_BUCK7_VOLT,
460 .vsel_mask = BD71828_MASK_BUCK1267_VOLT,
461 .owner = THIS_MODULE,
462 .of_parse_cb = buck_set_hw_dvs_levels,
463 },
464 .dvs = {
465 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
466 ROHM_DVS_LEVEL_SUSPEND |
467 ROHM_DVS_LEVEL_LPSR,
468 .run_reg = BD71828_REG_BUCK7_VOLT,
469 .run_mask = BD71828_MASK_BUCK1267_VOLT,
470 .idle_reg = BD71828_REG_BUCK7_IDLE_VOLT,
471 .idle_mask = BD71828_MASK_BUCK1267_VOLT,
472 .idle_on_mask = BD71828_MASK_IDLE_EN,
473 .suspend_reg = BD71828_REG_BUCK7_SUSP_VOLT,
474 .suspend_mask = BD71828_MASK_BUCK1267_VOLT,
475 .suspend_on_mask = BD71828_MASK_SUSP_EN,
476 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
477 .lpsr_reg = BD71828_REG_BUCK7_SUSP_VOLT,
478 .lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
479 },
480 .reg_inits = buck7_inits,
481 .reg_init_amnt = ARRAY_SIZE(buck7_inits),
482 },
483 {
484 .desc = {
485 .name = "ldo1",
486 .of_match = of_match_ptr("LDO1"),
487 .regulators_node = of_match_ptr("regulators"),
488 .id = BD71828_LDO1,
489 .ops = &bd71828_ldo_ops,
490 .type = REGULATOR_VOLTAGE,
491 .linear_ranges = bd71828_ldo_volts,
492 .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
493 .n_voltages = BD71828_LDO_VOLTS,
494 .enable_reg = BD71828_REG_LDO1_EN,
495 .enable_mask = BD71828_MASK_RUN_EN,
496 .vsel_reg = BD71828_REG_LDO1_VOLT,
497 .vsel_mask = BD71828_MASK_LDO_VOLT,
498 .owner = THIS_MODULE,
499 .of_parse_cb = buck_set_hw_dvs_levels,
500 },
501 .dvs = {
502 /*
503 * LDO1 only supports single voltage for all states.
504 * voltage can be individually enabled for each state
505 * though => allow setting all states to support
506 * enabling power rail on different states.
507 */
508 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
509 ROHM_DVS_LEVEL_SUSPEND |
510 ROHM_DVS_LEVEL_LPSR,
511 .run_reg = BD71828_REG_LDO1_VOLT,
512 .idle_reg = BD71828_REG_LDO1_VOLT,
513 .suspend_reg = BD71828_REG_LDO1_VOLT,
514 .lpsr_reg = BD71828_REG_LDO1_VOLT,
515 .run_mask = BD71828_MASK_LDO_VOLT,
516 .idle_mask = BD71828_MASK_LDO_VOLT,
517 .suspend_mask = BD71828_MASK_LDO_VOLT,
518 .lpsr_mask = BD71828_MASK_LDO_VOLT,
519 .idle_on_mask = BD71828_MASK_IDLE_EN,
520 .suspend_on_mask = BD71828_MASK_SUSP_EN,
521 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
522 },
523 }, {
524 .desc = {
525 .name = "ldo2",
526 .of_match = of_match_ptr("LDO2"),
527 .regulators_node = of_match_ptr("regulators"),
528 .id = BD71828_LDO2,
529 .ops = &bd71828_ldo_ops,
530 .type = REGULATOR_VOLTAGE,
531 .linear_ranges = bd71828_ldo_volts,
532 .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
533 .n_voltages = BD71828_LDO_VOLTS,
534 .enable_reg = BD71828_REG_LDO2_EN,
535 .enable_mask = BD71828_MASK_RUN_EN,
536 .vsel_reg = BD71828_REG_LDO2_VOLT,
537 .vsel_mask = BD71828_MASK_LDO_VOLT,
538 .owner = THIS_MODULE,
539 .of_parse_cb = buck_set_hw_dvs_levels,
540 },
541 .dvs = {
542 /*
543 * LDO2 only supports single voltage for all states.
544 * voltage can be individually enabled for each state
545 * though => allow setting all states to support
546 * enabling power rail on different states.
547 */
548 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
549 ROHM_DVS_LEVEL_SUSPEND |
550 ROHM_DVS_LEVEL_LPSR,
551 .run_reg = BD71828_REG_LDO2_VOLT,
552 .idle_reg = BD71828_REG_LDO2_VOLT,
553 .suspend_reg = BD71828_REG_LDO2_VOLT,
554 .lpsr_reg = BD71828_REG_LDO2_VOLT,
555 .run_mask = BD71828_MASK_LDO_VOLT,
556 .idle_mask = BD71828_MASK_LDO_VOLT,
557 .suspend_mask = BD71828_MASK_LDO_VOLT,
558 .lpsr_mask = BD71828_MASK_LDO_VOLT,
559 .idle_on_mask = BD71828_MASK_IDLE_EN,
560 .suspend_on_mask = BD71828_MASK_SUSP_EN,
561 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
562 },
563 }, {
564 .desc = {
565 .name = "ldo3",
566 .of_match = of_match_ptr("LDO3"),
567 .regulators_node = of_match_ptr("regulators"),
568 .id = BD71828_LDO3,
569 .ops = &bd71828_ldo_ops,
570 .type = REGULATOR_VOLTAGE,
571 .linear_ranges = bd71828_ldo_volts,
572 .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
573 .n_voltages = BD71828_LDO_VOLTS,
574 .enable_reg = BD71828_REG_LDO3_EN,
575 .enable_mask = BD71828_MASK_RUN_EN,
576 .vsel_reg = BD71828_REG_LDO3_VOLT,
577 .vsel_mask = BD71828_MASK_LDO_VOLT,
578 .owner = THIS_MODULE,
579 .of_parse_cb = buck_set_hw_dvs_levels,
580 },
581 .dvs = {
582 /*
583 * LDO3 only supports single voltage for all states.
584 * voltage can be individually enabled for each state
585 * though => allow setting all states to support
586 * enabling power rail on different states.
587 */
588 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
589 ROHM_DVS_LEVEL_SUSPEND |
590 ROHM_DVS_LEVEL_LPSR,
591 .run_reg = BD71828_REG_LDO3_VOLT,
592 .idle_reg = BD71828_REG_LDO3_VOLT,
593 .suspend_reg = BD71828_REG_LDO3_VOLT,
594 .lpsr_reg = BD71828_REG_LDO3_VOLT,
595 .run_mask = BD71828_MASK_LDO_VOLT,
596 .idle_mask = BD71828_MASK_LDO_VOLT,
597 .suspend_mask = BD71828_MASK_LDO_VOLT,
598 .lpsr_mask = BD71828_MASK_LDO_VOLT,
599 .idle_on_mask = BD71828_MASK_IDLE_EN,
600 .suspend_on_mask = BD71828_MASK_SUSP_EN,
601 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
602 },
603
604 }, {
605 .desc = {
606 .name = "ldo4",
607 .of_match = of_match_ptr("LDO4"),
608 .regulators_node = of_match_ptr("regulators"),
609 .id = BD71828_LDO4,
610 .ops = &bd71828_ldo_ops,
611 .type = REGULATOR_VOLTAGE,
612 .linear_ranges = bd71828_ldo_volts,
613 .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
614 .n_voltages = BD71828_LDO_VOLTS,
615 .enable_reg = BD71828_REG_LDO4_EN,
616 .enable_mask = BD71828_MASK_RUN_EN,
617 .vsel_reg = BD71828_REG_LDO4_VOLT,
618 .vsel_mask = BD71828_MASK_LDO_VOLT,
619 .owner = THIS_MODULE,
620 .of_parse_cb = buck_set_hw_dvs_levels,
621 },
622 .dvs = {
623 /*
624 * LDO1 only supports single voltage for all states.
625 * voltage can be individually enabled for each state
626 * though => allow setting all states to support
627 * enabling power rail on different states.
628 */
629 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
630 ROHM_DVS_LEVEL_SUSPEND |
631 ROHM_DVS_LEVEL_LPSR,
632 .run_reg = BD71828_REG_LDO4_VOLT,
633 .idle_reg = BD71828_REG_LDO4_VOLT,
634 .suspend_reg = BD71828_REG_LDO4_VOLT,
635 .lpsr_reg = BD71828_REG_LDO4_VOLT,
636 .run_mask = BD71828_MASK_LDO_VOLT,
637 .idle_mask = BD71828_MASK_LDO_VOLT,
638 .suspend_mask = BD71828_MASK_LDO_VOLT,
639 .lpsr_mask = BD71828_MASK_LDO_VOLT,
640 .idle_on_mask = BD71828_MASK_IDLE_EN,
641 .suspend_on_mask = BD71828_MASK_SUSP_EN,
642 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
643 },
644 }, {
645 .desc = {
646 .name = "ldo5",
647 .of_match = of_match_ptr("LDO5"),
648 .regulators_node = of_match_ptr("regulators"),
649 .id = BD71828_LDO5,
650 .ops = &bd71828_ldo_ops,
651 .type = REGULATOR_VOLTAGE,
652 .linear_ranges = bd71828_ldo_volts,
653 .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
654 .n_voltages = BD71828_LDO_VOLTS,
655 .enable_reg = BD71828_REG_LDO5_EN,
656 .enable_mask = BD71828_MASK_RUN_EN,
657 .vsel_reg = BD71828_REG_LDO5_VOLT,
658 .vsel_mask = BD71828_MASK_LDO_VOLT,
659 .of_parse_cb = buck_set_hw_dvs_levels,
660 .owner = THIS_MODULE,
661 },
662 /*
663 * LDO5 is special. It can choose vsel settings to be configured
664 * from 2 different registers (by GPIO).
665 *
666 * This driver supports only configuration where
667 * BD71828_REG_LDO5_VOLT_L is used.
668 */
669 .dvs = {
670 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
671 ROHM_DVS_LEVEL_SUSPEND |
672 ROHM_DVS_LEVEL_LPSR,
673 .run_reg = BD71828_REG_LDO5_VOLT,
674 .idle_reg = BD71828_REG_LDO5_VOLT,
675 .suspend_reg = BD71828_REG_LDO5_VOLT,
676 .lpsr_reg = BD71828_REG_LDO5_VOLT,
677 .run_mask = BD71828_MASK_LDO_VOLT,
678 .idle_mask = BD71828_MASK_LDO_VOLT,
679 .suspend_mask = BD71828_MASK_LDO_VOLT,
680 .lpsr_mask = BD71828_MASK_LDO_VOLT,
681 .idle_on_mask = BD71828_MASK_IDLE_EN,
682 .suspend_on_mask = BD71828_MASK_SUSP_EN,
683 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
684 },
685
686 }, {
687 .desc = {
688 .name = "ldo6",
689 .of_match = of_match_ptr("LDO6"),
690 .regulators_node = of_match_ptr("regulators"),
691 .id = BD71828_LDO6,
692 .ops = &bd71828_ldo6_ops,
693 .type = REGULATOR_VOLTAGE,
694 .fixed_uV = BD71828_LDO_6_VOLTAGE,
695 .n_voltages = 1,
696 .enable_reg = BD71828_REG_LDO6_EN,
697 .enable_mask = BD71828_MASK_RUN_EN,
698 .owner = THIS_MODULE,
699 /*
700 * LDO6 only supports enable/disable for all states.
701 * Voltage for LDO6 is fixed.
702 */
703 .of_parse_cb = ldo6_parse_dt,
704 },
705 }, {
706 .desc = {
707 /* SNVS LDO in data-sheet */
708 .name = "ldo7",
709 .of_match = of_match_ptr("LDO7"),
710 .regulators_node = of_match_ptr("regulators"),
711 .id = BD71828_LDO_SNVS,
712 .ops = &bd71828_ldo_ops,
713 .type = REGULATOR_VOLTAGE,
714 .linear_ranges = bd71828_ldo_volts,
715 .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
716 .n_voltages = BD71828_LDO_VOLTS,
717 .enable_reg = BD71828_REG_LDO7_EN,
718 .enable_mask = BD71828_MASK_RUN_EN,
719 .vsel_reg = BD71828_REG_LDO7_VOLT,
720 .vsel_mask = BD71828_MASK_LDO_VOLT,
721 .owner = THIS_MODULE,
722 .of_parse_cb = buck_set_hw_dvs_levels,
723 },
724 .dvs = {
725 /*
726 * LDO7 only supports single voltage for all states.
727 * voltage can be individually enabled for each state
728 * though => allow setting all states to support
729 * enabling power rail on different states.
730 */
731 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
732 ROHM_DVS_LEVEL_SUSPEND |
733 ROHM_DVS_LEVEL_LPSR,
734 .run_reg = BD71828_REG_LDO7_VOLT,
735 .idle_reg = BD71828_REG_LDO7_VOLT,
736 .suspend_reg = BD71828_REG_LDO7_VOLT,
737 .lpsr_reg = BD71828_REG_LDO7_VOLT,
738 .run_mask = BD71828_MASK_LDO_VOLT,
739 .idle_mask = BD71828_MASK_LDO_VOLT,
740 .suspend_mask = BD71828_MASK_LDO_VOLT,
741 .lpsr_mask = BD71828_MASK_LDO_VOLT,
742 .idle_on_mask = BD71828_MASK_IDLE_EN,
743 .suspend_on_mask = BD71828_MASK_SUSP_EN,
744 .lpsr_on_mask = BD71828_MASK_LPSR_EN,
745 },
746
747 },
748 };
749
750 static int bd71828_probe(struct platform_device *pdev)
751 {
752 struct rohm_regmap_dev *bd71828;
753 int i, j, ret;
754 struct regulator_config config = {
755 .dev = pdev->dev.parent,
756 };
757
758 bd71828 = dev_get_drvdata(pdev->dev.parent);
759 if (!bd71828) {
760 dev_err(&pdev->dev, "No MFD driver data\n");
761 return -EINVAL;
762 }
763
764 config.regmap = bd71828->regmap;
765
766 for (i = 0; i < ARRAY_SIZE(bd71828_rdata); i++) {
767 struct regulator_dev *rdev;
768 const struct bd71828_regulator_data *rd;
769
770 rd = &bd71828_rdata[i];
771 rdev = devm_regulator_register(&pdev->dev,
772 &rd->desc, &config);
773 if (IS_ERR(rdev)) {
774 dev_err(&pdev->dev,
775 "failed to register %s regulator\n",
776 rd->desc.name);
777 return PTR_ERR(rdev);
778 }
779 for (j = 0; j < rd->reg_init_amnt; j++) {
780 ret = regmap_update_bits(bd71828->regmap,
781 rd->reg_inits[j].reg,
782 rd->reg_inits[j].mask,
783 rd->reg_inits[j].val);
784 if (ret) {
785 dev_err(&pdev->dev,
786 "regulator %s init failed\n",
787 rd->desc.name);
788 return ret;
789 }
790 }
791 }
792 return 0;
793 }
794
795 static struct platform_driver bd71828_regulator = {
796 .driver = {
797 .name = "bd71828-pmic"
798 },
799 .probe = bd71828_probe,
800 };
801
802 module_platform_driver(bd71828_regulator);
803
804 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
805 MODULE_DESCRIPTION("BD71828 voltage regulator driver");
806 MODULE_LICENSE("GPL");
807 MODULE_ALIAS("platform:bd71828-pmic");
Linux with added FPC-III support