2 * GE PPC9A Device Tree Source
4 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
11 * Based on: SBS CM6 Device Tree Source
12 * Copyright 2007 SBS Technologies GmbH & Co. KG
13 * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
14 * Copyright 2006 Freescale Semiconductor Inc.
18 * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
25 compatible = "gef,ppc9a";
44 d-cache-line-size = <32>; // 32 bytes
45 i-cache-line-size = <32>; // 32 bytes
46 d-cache-size = <32768>; // L1, 32K
47 i-cache-size = <32768>; // L1, 32K
48 timebase-frequency = <0>; // From uboot
49 bus-frequency = <0>; // From uboot
50 clock-frequency = <0>; // From uboot
55 d-cache-line-size = <32>; // 32 bytes
56 i-cache-line-size = <32>; // 32 bytes
57 d-cache-size = <32768>; // L1, 32K
58 i-cache-size = <32768>; // L1, 32K
59 timebase-frequency = <0>; // From uboot
60 bus-frequency = <0>; // From uboot
61 clock-frequency = <0>; // From uboot
66 device_type = "memory";
67 reg = <0x0 0x40000000>; // set by uboot
73 compatible = "fsl,mpc8641-localbus", "simple-bus";
74 reg = <0xfef05000 0x1000>;
76 interrupt-parent = <&mpic>;
78 ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
79 1 0 0xe8000000 0x08000000 // Paged Flash 0
80 2 0 0xe0000000 0x08000000 // Paged Flash 1
81 3 0 0xfc100000 0x00020000 // NVRAM
82 4 0 0xfc000000 0x00008000 // FPGA
83 5 0 0xfc008000 0x00008000 // AFIX FPGA
84 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
85 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
87 /* flash@0,0 is a mirror of part of the memory in flash@1,0
89 compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
90 reg = <0x0 0x0 0x1000000>;
97 reg = <0x0 0x1000000>;
104 compatible = "gef,ppc9a-paged-flash", "cfi-flash";
105 reg = <0x1 0x0 0x8000000>;
108 #address-cells = <1>;
112 reg = <0x0 0x7800000>;
116 reg = <0x7800000 0x800000>;
122 device_type = "nvram";
123 compatible = "simtek,stk14ca8";
124 reg = <0x3 0x0 0x20000>;
128 compatible = "gef,ppc9a-fpga-regs";
129 reg = <0x4 0x0 0x40>;
133 compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
135 reg = <0x4 0x2000 0x8>;
136 interrupts = <0x1a 0x4>;
137 interrupt-parent = <&gef_pic>;
139 /* Second watchdog available, driver currently supports one.
141 compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
143 reg = <0x4 0x2010 0x8>;
144 interrupts = <0x1b 0x4>;
145 interrupt-parent = <&gef_pic>;
148 gef_pic: pic@4,4000 {
149 #interrupt-cells = <1>;
150 interrupt-controller;
151 compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
152 reg = <0x4 0x4000 0x20>;
155 interrupt-parent = <&mpic>;
158 gef_gpio: gpio@7,14000 {
160 compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
161 reg = <0x7 0x14000 0x24>;
167 #address-cells = <1>;
169 #interrupt-cells = <2>;
171 compatible = "fsl,mpc8641-soc", "simple-bus";
172 ranges = <0x0 0xfef00000 0x00100000>;
173 bus-frequency = <33333333>;
176 compatible = "fsl,mcm-law";
182 compatible = "fsl,mpc8641-mcm", "fsl,mcm";
183 reg = <0x1000 0x1000>;
185 interrupt-parent = <&mpic>;
189 #address-cells = <1>;
191 compatible = "fsl-i2c";
192 reg = <0x3000 0x100>;
193 interrupts = <0x2b 0x2>;
194 interrupt-parent = <&mpic>;
198 compatible = "national,lm92";
203 compatible = "adi,adt7461";
208 compatible = "epson,rx8581";
213 compatible = "dallas,ds1682";
219 #address-cells = <1>;
221 compatible = "fsl-i2c";
222 reg = <0x3100 0x100>;
223 interrupts = <0x2b 0x2>;
224 interrupt-parent = <&mpic>;
229 #address-cells = <1>;
231 compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
233 ranges = <0x0 0x21100 0x200>;
236 compatible = "fsl,mpc8641-dma-channel",
237 "fsl,eloplus-dma-channel";
240 interrupt-parent = <&mpic>;
244 compatible = "fsl,mpc8641-dma-channel",
245 "fsl,eloplus-dma-channel";
248 interrupt-parent = <&mpic>;
252 compatible = "fsl,mpc8641-dma-channel",
253 "fsl,eloplus-dma-channel";
256 interrupt-parent = <&mpic>;
260 compatible = "fsl,mpc8641-dma-channel",
261 "fsl,eloplus-dma-channel";
264 interrupt-parent = <&mpic>;
269 enet0: ethernet@24000 {
270 #address-cells = <1>;
273 device_type = "network";
275 compatible = "gianfar";
276 reg = <0x24000 0x1000>;
277 ranges = <0x0 0x24000 0x1000>;
278 local-mac-address = [ 00 00 00 00 00 00 ];
279 interrupts = <29 2 30 2 34 2>;
280 interrupt-parent = <&mpic>;
281 tbi-handle = <&tbi0>;
282 phy-handle = <&phy0>;
283 phy-connection-type = "gmii";
286 #address-cells = <1>;
288 compatible = "fsl,gianfar-mdio";
291 phy0: ethernet-phy@0 {
292 interrupt-parent = <&gef_pic>;
293 interrupts = <0x9 0x4>;
296 phy2: ethernet-phy@2 {
297 interrupt-parent = <&gef_pic>;
298 interrupts = <0x8 0x4>;
303 device_type = "tbi-phy";
308 enet1: ethernet@26000 {
309 #address-cells = <1>;
312 device_type = "network";
314 compatible = "gianfar";
315 reg = <0x26000 0x1000>;
316 ranges = <0x0 0x26000 0x1000>;
317 local-mac-address = [ 00 00 00 00 00 00 ];
318 interrupts = <31 2 32 2 33 2>;
319 interrupt-parent = <&mpic>;
320 tbi-handle = <&tbi2>;
321 phy-handle = <&phy2>;
322 phy-connection-type = "gmii";
325 #address-cells = <1>;
327 compatible = "fsl,gianfar-tbi";
332 device_type = "tbi-phy";
337 serial0: serial@4500 {
339 device_type = "serial";
340 compatible = "fsl,ns16550", "ns16550";
341 reg = <0x4500 0x100>;
342 clock-frequency = <0>;
343 interrupts = <0x2a 0x2>;
344 interrupt-parent = <&mpic>;
347 serial1: serial@4600 {
349 device_type = "serial";
350 compatible = "fsl,ns16550", "ns16550";
351 reg = <0x4600 0x100>;
352 clock-frequency = <0>;
353 interrupts = <0x1c 0x2>;
354 interrupt-parent = <&mpic>;
358 clock-frequency = <0>;
359 interrupt-controller;
360 #address-cells = <0>;
361 #interrupt-cells = <2>;
362 reg = <0x40000 0x40000>;
363 compatible = "chrp,open-pic";
364 device_type = "open-pic";
368 compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
369 reg = <0x41600 0x80>;
370 msi-available-ranges = <0 0x100>;
380 interrupt-parent = <&mpic>;
383 global-utilities@e0000 {
384 compatible = "fsl,mpc8641-guts";
385 reg = <0xe0000 0x1000>;
390 pci0: pcie@fef08000 {
391 compatible = "fsl,mpc8641-pcie";
393 #interrupt-cells = <1>;
395 #address-cells = <3>;
396 reg = <0xfef08000 0x1000>;
397 bus-range = <0x0 0xff>;
398 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
399 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
400 clock-frequency = <33333333>;
401 interrupt-parent = <&mpic>;
402 interrupts = <0x18 0x2>;
403 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
405 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
406 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
407 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
408 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
414 #address-cells = <3>;
416 ranges = <0x02000000 0x0 0x80000000
417 0x02000000 0x0 0x80000000
420 0x01000000 0x0 0x00000000
421 0x01000000 0x0 0x00000000