arch/powerpc/boot/dts/p1022rdk.dts

   1 /*
   2  * P1022 RDK 32-bit Physical Address Map Device Tree Source
   3  *
   4  * Copyright 2012 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "fsl/p1022si-pre.dtsi"
  36 / {
  37         model = "fsl,P1022RDK";
  38         compatible = "fsl,P1022RDK";
  39
  40         memory {
  41                 device_type = "memory";
  42         };
  43
  44         board_lbc: lbc: localbus@ffe05000 {
  45                 /* The P1022 RDK does not have any localbus devices */
  46                 status = "disabled";
  47         };
  48
  49         board_soc: soc: soc@ffe00000 {
  50                 ranges = <0x0 0x0 0xffe00000 0x100000>;
  51
  52                 i2c@3100 {
  53                         wm8960:codec@1a {
  54                                 compatible = "wlf,wm8960";
  55                                 reg = <0x1a>;
  56                                 /* MCLK source is a stand-alone oscillator */
  57                                 clock-frequency = <12288000>;
  58                         };
  59                         rtc@68 {
  60                                 compatible = "stm,m41t62";
  61                                 reg = <0x68>;
  62                         };
  63                         adt7461@4c{
  64                                 compatible = "adi,adt7461";
  65                                 reg = <0x4c>;
  66                         };
  67                         zl6100@21{
  68                                 compatible = "isil,zl6100";
  69                                 reg = <0x21>;
  70                         };
  71                         zl6100@24{
  72                                 compatible = "isil,zl6100";
  73                                 reg = <0x24>;
  74                         };
  75                         zl6100@26{
  76                                 compatible = "isil,zl6100";
  77                                 reg = <0x26>;
  78                         };
  79                         zl6100@29{
  80                                 compatible = "isil,zl6100";
  81                                 reg = <0x29>;
  82                         };
  83                 };
  84
  85                 spi@7000 {
  86                         flash@0 {
  87                                 #address-cells = <1>;
  88                                 #size-cells = <1>;
  89                                 compatible = "spansion,m25p80";
  90                                 reg = <0>;
  91                                 spi-max-frequency = <1000000>;
  92                                 partition@0 {
  93                                         label = "full-spi-flash";
  94                                         reg = <0x00000000 0x00100000>;
  95                                 };
  96                         };
  97                 };
  98
  99                 ssi@15000 {
 100                         fsl,mode = "i2s-slave";
 101                         codec-handle = <&wm8960>;
 102                 };
 103
 104                 usb@22000 {
 105                         phy_type = "ulpi";
 106                 };
 107
 108                 usb@23000 {
 109                         phy_type = "ulpi";
 110                 };
 111
 112                 mdio@24000 {
 113                         phy0: ethernet-phy@0 {
 114                                 interrupts = <3 1 0 0>;
 115                                 reg = <0x1>;
 116                         };
 117                         phy1: ethernet-phy@1 {
 118                                 interrupts = <9 1 0 0>;
 119                                 reg = <0x2>;
 120                         };
 121                 };
 122
 123                 mdio@25000 {
 124                         tbi0: tbi-phy@11 {
 125                                 reg = <0x11>;
 126                                 device_type = "tbi-phy";
 127                         };
 128                 };
 129
 130                 ethernet@b0000 {
 131                         phy-handle = <&phy0>;
 132                         phy-connection-type = "rgmii-id";
 133                 };
 134
 135                 ethernet@b1000 {
 136                         phy-handle = <&phy1>;
 137                         tbi-handle = <&tbi0>;
 138                         phy-connection-type = "sgmii";
 139                 };
 140         };
 141
 142         pci0: pcie@ffe09000 {
 143                 ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
 144                           0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 145                 reg = <0x0 0xffe09000 0 0x1000>;
 146                 pcie@0 {
 147                         ranges = <0x2000000 0x0 0xe0000000
 148                                   0x2000000 0x0 0xe0000000
 149                                   0x0 0x20000000
 150
 151                                   0x1000000 0x0 0x0
 152                                   0x1000000 0x0 0x0
 153                                   0x0 0x100000>;
 154                 };
 155         };
 156
 157         pci1: pcie@ffe0a000 {
 158                 ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
 159                           0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
 160                 reg = <0 0xffe0a000 0 0x1000>;
 161                 pcie@0 {
 162                         ranges = <0x2000000 0x0 0xe0000000
 163                                   0x2000000 0x0 0xe0000000
 164                                   0x0 0x20000000
 165
 166                                   0x1000000 0x0 0x0
 167                                   0x1000000 0x0 0x0
 168                                   0x0 0x100000>;
 169                 };
 170         };
 171
 172         pci2: pcie@ffe0b000 {
 173                 ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
 174                           0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
 175                 reg = <0 0xffe0b000 0 0x1000>;
 176                 pcie@0 {
 177                         ranges = <0x2000000 0x0 0xe0000000
 178                                   0x2000000 0x0 0xe0000000
 179                                   0x0 0x20000000
 180
 181                                   0x1000000 0x0 0x0
 182                                   0x1000000 0x0 0x0
 183                                   0x0 0x100000>;
 184                 };
 185         };
 186 };
 187
 188 /include/ "fsl/p1022si-post.dtsi"