2 * Copyright (c) 2016 Intel Corporation
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
23 #ifndef __DRM_ENCODER_H__
24 #define __DRM_ENCODER_H__
26 #include <linux/list.h>
27 #include <linux/ctype.h>
28 #include <drm/drm_crtc.h>
29 #include <drm/drm_mode.h>
30 #include <drm/drm_mode_object.h>
31 #include <drm/drm_util.h>
36 * struct drm_encoder_funcs - encoder controls
38 * Encoders sit between CRTCs and connectors.
40 struct drm_encoder_funcs
{
44 * Reset encoder hardware and software state to off. This function isn't
45 * called by the core directly, only through drm_mode_config_reset().
46 * It's not a helper hook only for historical reasons.
48 void (*reset
)(struct drm_encoder
*encoder
);
53 * Clean up encoder resources. This is only called at driver unload time
54 * through drm_mode_config_cleanup() since an encoder cannot be
57 void (*destroy
)(struct drm_encoder
*encoder
);
62 * This optional hook can be used to register additional userspace
63 * interfaces attached to the encoder like debugfs interfaces.
64 * It is called late in the driver load sequence from drm_dev_register().
65 * Everything added from this callback should be unregistered in
66 * the early_unregister callback.
70 * 0 on success, or a negative error code on failure.
72 int (*late_register
)(struct drm_encoder
*encoder
);
77 * This optional hook should be used to unregister the additional
78 * userspace interfaces attached to the encoder from
79 * @late_register. It is called from drm_dev_unregister(),
80 * early in the driver unload sequence to disable userspace access
81 * before data structures are torndown.
83 void (*early_unregister
)(struct drm_encoder
*encoder
);
87 * struct drm_encoder - central DRM encoder structure
88 * @dev: parent DRM device
89 * @head: list management
90 * @base: base KMS object
91 * @name: human readable name, can be overwritten by the driver
92 * @bridge: bridge associated to the encoder
93 * @funcs: control functions
94 * @helper_private: mid-layer private data
96 * CRTCs drive pixels to encoders, which convert them into signals
97 * appropriate for a given connector or set of connectors.
100 struct drm_device
*dev
;
101 struct list_head head
;
103 struct drm_mode_object base
;
108 * One of the DRM_MODE_ENCODER_<foo> types in drm_mode.h. The following
109 * encoder types are defined thus far:
111 * - DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A.
113 * - DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort.
115 * - DRM_MODE_ENCODER_LVDS for display panels, or in general any panel
116 * with a proprietary parallel connector.
118 * - DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video,
121 * - DRM_MODE_ENCODER_VIRTUAL for virtual machine displays
123 * - DRM_MODE_ENCODER_DSI for panels connected using the DSI serial bus.
125 * - DRM_MODE_ENCODER_DPI for panels connected using the DPI parallel
128 * - DRM_MODE_ENCODER_DPMST for special fake encoders used to allow
129 * mutliple DP MST streams to share one physical encoder.
134 * @index: Position inside the mode_config.list, can be used as an array
135 * index. It is invariant over the lifetime of the encoder.
140 * @possible_crtcs: Bitmask of potential CRTC bindings, using
141 * drm_crtc_index() as the index into the bitfield. The driver must set
142 * the bits for all &drm_crtc objects this encoder can be connected to
143 * before calling drm_dev_register().
145 * In reality almost every driver gets this wrong.
147 * Note that since CRTC objects can't be hotplugged the assigned indices
148 * are stable and hence known before registering all objects.
150 uint32_t possible_crtcs
;
153 * @possible_clones: Bitmask of potential sibling encoders for cloning,
154 * using drm_encoder_index() as the index into the bitfield. The driver
155 * must set the bits for all &drm_encoder objects which can clone a
156 * &drm_crtc together with this encoder before calling
157 * drm_dev_register(). Drivers should set the bit representing the
158 * encoder itself, too. Cloning bits should be set such that when two
159 * encoders can be used in a cloned configuration, they both should have
160 * each another bits set.
162 * In reality almost every driver gets this wrong.
164 * Note that since encoder objects can't be hotplugged the assigned indices
165 * are stable and hence known before registering all objects.
167 uint32_t possible_clones
;
170 * @crtc: Currently bound CRTC, only really meaningful for non-atomic
171 * drivers. Atomic drivers should instead check
172 * &drm_connector_state.crtc.
174 struct drm_crtc
*crtc
;
177 * @bridge_chain: Bridges attached to this encoder.
179 struct list_head bridge_chain
;
181 const struct drm_encoder_funcs
*funcs
;
182 const struct drm_encoder_helper_funcs
*helper_private
;
185 #define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
188 int drm_encoder_init(struct drm_device
*dev
,
189 struct drm_encoder
*encoder
,
190 const struct drm_encoder_funcs
*funcs
,
191 int encoder_type
, const char *name
, ...);
194 * drm_encoder_index - find the index of a registered encoder
195 * @encoder: encoder to find index for
197 * Given a registered encoder, return the index of that encoder within a DRM
198 * device's list of encoders.
200 static inline unsigned int drm_encoder_index(const struct drm_encoder
*encoder
)
202 return encoder
->index
;
206 * drm_encoder_mask - find the mask of a registered encoder
207 * @encoder: encoder to find mask for
209 * Given a registered encoder, return the mask bit of that encoder for an
210 * encoder's possible_clones field.
212 static inline u32
drm_encoder_mask(const struct drm_encoder
*encoder
)
214 return 1 << drm_encoder_index(encoder
);
218 * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
219 * @encoder: encoder to test
220 * @crtc: crtc to test
222 * Returns false if @encoder can't be driven by @crtc, true otherwise.
224 static inline bool drm_encoder_crtc_ok(struct drm_encoder
*encoder
,
225 struct drm_crtc
*crtc
)
227 return !!(encoder
->possible_crtcs
& drm_crtc_mask(crtc
));
231 * drm_encoder_find - find a &drm_encoder
233 * @file_priv: drm file to check for lease against.
236 * Returns the encoder with @id, NULL if it doesn't exist. Simple wrapper around
237 * drm_mode_object_find().
239 static inline struct drm_encoder
*drm_encoder_find(struct drm_device
*dev
,
240 struct drm_file
*file_priv
,
243 struct drm_mode_object
*mo
;
245 mo
= drm_mode_object_find(dev
, file_priv
, id
, DRM_MODE_OBJECT_ENCODER
);
247 return mo
? obj_to_encoder(mo
) : NULL
;
250 void drm_encoder_cleanup(struct drm_encoder
*encoder
);
253 * drm_for_each_encoder_mask - iterate over encoders specified by bitmask
254 * @encoder: the loop cursor
255 * @dev: the DRM device
256 * @encoder_mask: bitmask of encoder indices
258 * Iterate over all encoders specified by bitmask.
260 #define drm_for_each_encoder_mask(encoder, dev, encoder_mask) \
261 list_for_each_entry((encoder), &(dev)->mode_config.encoder_list, head) \
262 for_each_if ((encoder_mask) & drm_encoder_mask(encoder))
265 * drm_for_each_encoder - iterate over all encoders
266 * @encoder: the loop cursor
267 * @dev: the DRM device
269 * Iterate over all encoders of @dev.
271 #define drm_for_each_encoder(encoder, dev) \
272 list_for_each_entry(encoder, &(dev)->mode_config.encoder_list, head)