Linux 4.8.3
[linux/fpc-iii.git] / fs / nilfs2 / gcinode.c
blob853a831dcde0890481d45fdfadf89ff8a35b7671
1 /*
2 * gcinode.c - dummy inodes to buffer blocks for garbage collection
4 * Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * Written by Seiji Kihara, Amagai Yoshiji, and Ryusuke Konishi.
17 * Revised by Ryusuke Konishi.
21 * This file adds the cache of on-disk blocks to be moved in garbage
22 * collection. The disk blocks are held with dummy inodes (called
23 * gcinodes), and this file provides lookup function of the dummy
24 * inodes and their buffer read function.
26 * Buffers and pages held by the dummy inodes will be released each
27 * time after they are copied to a new log. Dirty blocks made on the
28 * current generation and the blocks to be moved by GC never overlap
29 * because the dirty blocks make a new generation; they rather must be
30 * written individually.
33 #include <linux/buffer_head.h>
34 #include <linux/mpage.h>
35 #include <linux/hash.h>
36 #include <linux/slab.h>
37 #include <linux/swap.h>
38 #include "nilfs.h"
39 #include "btree.h"
40 #include "btnode.h"
41 #include "page.h"
42 #include "mdt.h"
43 #include "dat.h"
44 #include "ifile.h"
47 * nilfs_gccache_submit_read_data() - add data buffer and submit read request
48 * @inode - gc inode
49 * @blkoff - dummy offset treated as the key for the page cache
50 * @pbn - physical block number of the block
51 * @vbn - virtual block number of the block, 0 for non-virtual block
52 * @out_bh - indirect pointer to a buffer_head struct to receive the results
54 * Description: nilfs_gccache_submit_read_data() registers the data buffer
55 * specified by @pbn to the GC pagecache with the key @blkoff.
56 * This function sets @vbn (@pbn if @vbn is zero) in b_blocknr of the buffer.
58 * Return Value: On success, 0 is returned. On Error, one of the following
59 * negative error code is returned.
61 * %-EIO - I/O error.
63 * %-ENOMEM - Insufficient amount of memory available.
65 * %-ENOENT - The block specified with @pbn does not exist.
67 int nilfs_gccache_submit_read_data(struct inode *inode, sector_t blkoff,
68 sector_t pbn, __u64 vbn,
69 struct buffer_head **out_bh)
71 struct buffer_head *bh;
72 int err;
74 bh = nilfs_grab_buffer(inode, inode->i_mapping, blkoff, 0);
75 if (unlikely(!bh))
76 return -ENOMEM;
78 if (buffer_uptodate(bh))
79 goto out;
81 if (pbn == 0) {
82 struct the_nilfs *nilfs = inode->i_sb->s_fs_info;
84 err = nilfs_dat_translate(nilfs->ns_dat, vbn, &pbn);
85 if (unlikely(err)) { /* -EIO, -ENOMEM, -ENOENT */
86 brelse(bh);
87 goto failed;
91 lock_buffer(bh);
92 if (buffer_uptodate(bh)) {
93 unlock_buffer(bh);
94 goto out;
97 if (!buffer_mapped(bh)) {
98 bh->b_bdev = inode->i_sb->s_bdev;
99 set_buffer_mapped(bh);
101 bh->b_blocknr = pbn;
102 bh->b_end_io = end_buffer_read_sync;
103 get_bh(bh);
104 submit_bh(REQ_OP_READ, 0, bh);
105 if (vbn)
106 bh->b_blocknr = vbn;
107 out:
108 err = 0;
109 *out_bh = bh;
111 failed:
112 unlock_page(bh->b_page);
113 put_page(bh->b_page);
114 return err;
118 * nilfs_gccache_submit_read_node() - add node buffer and submit read request
119 * @inode - gc inode
120 * @pbn - physical block number for the block
121 * @vbn - virtual block number for the block
122 * @out_bh - indirect pointer to a buffer_head struct to receive the results
124 * Description: nilfs_gccache_submit_read_node() registers the node buffer
125 * specified by @vbn to the GC pagecache. @pbn can be supplied by the
126 * caller to avoid translation of the disk block address.
128 * Return Value: On success, 0 is returned. On Error, one of the following
129 * negative error code is returned.
131 * %-EIO - I/O error.
133 * %-ENOMEM - Insufficient amount of memory available.
135 int nilfs_gccache_submit_read_node(struct inode *inode, sector_t pbn,
136 __u64 vbn, struct buffer_head **out_bh)
138 int ret;
140 ret = nilfs_btnode_submit_block(&NILFS_I(inode)->i_btnode_cache,
141 vbn ? : pbn, pbn, REQ_OP_READ, 0,
142 out_bh, &pbn);
143 if (ret == -EEXIST) /* internal code (cache hit) */
144 ret = 0;
145 return ret;
148 int nilfs_gccache_wait_and_mark_dirty(struct buffer_head *bh)
150 wait_on_buffer(bh);
151 if (!buffer_uptodate(bh)) {
152 struct inode *inode = bh->b_page->mapping->host;
154 nilfs_msg(inode->i_sb, KERN_ERR,
155 "I/O error reading %s block for GC (ino=%lu, vblocknr=%llu)",
156 buffer_nilfs_node(bh) ? "node" : "data",
157 inode->i_ino, (unsigned long long)bh->b_blocknr);
158 return -EIO;
160 if (buffer_dirty(bh))
161 return -EEXIST;
163 if (buffer_nilfs_node(bh) && nilfs_btree_broken_node_block(bh)) {
164 clear_buffer_uptodate(bh);
165 return -EIO;
167 mark_buffer_dirty(bh);
168 return 0;
171 int nilfs_init_gcinode(struct inode *inode)
173 struct nilfs_inode_info *ii = NILFS_I(inode);
175 inode->i_mode = S_IFREG;
176 mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
177 inode->i_mapping->a_ops = &empty_aops;
179 ii->i_flags = 0;
180 nilfs_bmap_init_gc(ii->i_bmap);
182 return 0;
186 * nilfs_remove_all_gcinodes() - remove all unprocessed gc inodes
188 void nilfs_remove_all_gcinodes(struct the_nilfs *nilfs)
190 struct list_head *head = &nilfs->ns_gc_inodes;
191 struct nilfs_inode_info *ii;
193 while (!list_empty(head)) {
194 ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
195 list_del_init(&ii->i_dirty);
196 truncate_inode_pages(&ii->vfs_inode.i_data, 0);
197 nilfs_btnode_cache_clear(&ii->i_btnode_cache);
198 iput(&ii->vfs_inode);