Linux 4.8.3
[linux/fpc-iii.git] / include / acpi / actypes.h
blobcb389efd321c86592ed40a0e62541df236f93bd9
1 /******************************************************************************
3 * Name: actypes.h - Common data types for the entire ACPI subsystem
5 *****************************************************************************/
7 /*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
44 #ifndef __ACTYPES_H__
45 #define __ACTYPES_H__
47 /* acpisrc:struct_defs -- for acpisrc conversion */
50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
51 * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of
52 * 12/2006.
54 #ifndef ACPI_MACHINE_WIDTH
55 #error ACPI_MACHINE_WIDTH not defined
56 #endif
59 * Data type ranges
60 * Note: These macros are designed to be compiler independent as well as
61 * working around problems that some 32-bit compilers have with 64-bit
62 * constants.
64 #define ACPI_UINT8_MAX (u8) (~((u8) 0)) /* 0xFF */
65 #define ACPI_UINT16_MAX (u16)(~((u16) 0)) /* 0xFFFF */
66 #define ACPI_UINT32_MAX (u32)(~((u32) 0)) /* 0xFFFFFFFF */
67 #define ACPI_UINT64_MAX (u64)(~((u64) 0)) /* 0xFFFFFFFFFFFFFFFF */
68 #define ACPI_ASCII_MAX 0x7F
71 * Architecture-specific ACPICA Subsystem Data Types
73 * The goal of these types is to provide source code portability across
74 * 16-bit, 32-bit, and 64-bit targets.
76 * 1) The following types are of fixed size for all targets (16/32/64):
78 * u8 Logical boolean
80 * u8 8-bit (1 byte) unsigned value
81 * u16 16-bit (2 byte) unsigned value
82 * u32 32-bit (4 byte) unsigned value
83 * u64 64-bit (8 byte) unsigned value
85 * s16 16-bit (2 byte) signed value
86 * s32 32-bit (4 byte) signed value
87 * s64 64-bit (8 byte) signed value
89 * COMPILER_DEPENDENT_UINT64/s64 - These types are defined in the
90 * compiler-dependent header(s) and were introduced because there is no common
91 * 64-bit integer type across the various compilation models, as shown in
92 * the table below.
94 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit
95 * char 8 8 8 8 8 8
96 * short 16 16 16 16 16 16
97 * _int32 32
98 * int 32 64 32 32 16 16
99 * long 64 64 32 32 32 32
100 * long long 64 64
101 * pointer 64 64 64 32 32 32
103 * Note: ILP64 and LP32 are currently not supported.
106 * 2) These types represent the native word size of the target mode of the
107 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
108 * usually used for memory allocation, efficient loop counters, and array
109 * indexes. The types are similar to the size_t type in the C library and are
110 * required because there is no C type that consistently represents the native
111 * data width. acpi_size is needed because there is no guarantee that a
112 * kernel-level C library is present.
114 * acpi_size 16/32/64-bit unsigned value
115 * acpi_native_int 16/32/64-bit signed value
118 /*******************************************************************************
120 * Common types for all compilers, all targets
122 ******************************************************************************/
124 #ifndef ACPI_USE_SYSTEM_INTTYPES
126 typedef unsigned char u8;
127 typedef unsigned short u16;
128 typedef short s16;
129 typedef COMPILER_DEPENDENT_UINT64 u64;
130 typedef COMPILER_DEPENDENT_INT64 s64;
132 #endif /* ACPI_USE_SYSTEM_INTTYPES */
135 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
136 * across operating systems or even the various UNIX systems. Since ACPICA
137 * only needs the thread ID as a unique thread identifier, we use a u64
138 * as the only common data type - it will accommodate any type of pointer or
139 * any type of integer. It is up to the host-dependent OSL to cast the
140 * native thread ID type to a u64 (in acpi_os_get_thread_id).
142 #define acpi_thread_id u64
144 /*******************************************************************************
146 * Types specific to 64-bit targets
148 ******************************************************************************/
150 #if ACPI_MACHINE_WIDTH == 64
152 #ifndef ACPI_USE_SYSTEM_INTTYPES
154 typedef unsigned int u32;
155 typedef int s32;
157 #endif /* ACPI_USE_SYSTEM_INTTYPES */
159 typedef s64 acpi_native_int;
161 typedef u64 acpi_size;
162 typedef u64 acpi_io_address;
163 typedef u64 acpi_physical_address;
165 #define ACPI_MAX_PTR ACPI_UINT64_MAX
166 #define ACPI_SIZE_MAX ACPI_UINT64_MAX
168 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */
171 * In the case of the Itanium Processor Family (IPF), the hardware does not
172 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
173 * to indicate that special precautions must be taken to avoid alignment faults.
174 * (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
176 * Note: EM64T and other X86-64 processors support misaligned transfers,
177 * so there is no need to define this flag.
179 #if defined (__IA64__) || defined (__ia64__)
180 #define ACPI_MISALIGNMENT_NOT_SUPPORTED
181 #endif
183 /*******************************************************************************
185 * Types specific to 32-bit targets
187 ******************************************************************************/
189 #elif ACPI_MACHINE_WIDTH == 32
191 #ifndef ACPI_USE_SYSTEM_INTTYPES
193 typedef unsigned int u32;
194 typedef int s32;
196 #endif /* ACPI_USE_SYSTEM_INTTYPES */
198 typedef s32 acpi_native_int;
200 typedef u32 acpi_size;
202 #ifdef ACPI_32BIT_PHYSICAL_ADDRESS
205 * OSPMs can define this to shrink the size of the structures for 32-bit
206 * none PAE environment. ASL compiler may always define this to generate
207 * 32-bit OSPM compliant tables.
209 typedef u32 acpi_io_address;
210 typedef u32 acpi_physical_address;
212 #else /* ACPI_32BIT_PHYSICAL_ADDRESS */
215 * It is reported that, after some calculations, the physical addresses can
216 * wrap over the 32-bit boundary on 32-bit PAE environment.
217 * https://bugzilla.kernel.org/show_bug.cgi?id=87971
219 typedef u64 acpi_io_address;
220 typedef u64 acpi_physical_address;
222 #endif /* ACPI_32BIT_PHYSICAL_ADDRESS */
224 #define ACPI_MAX_PTR ACPI_UINT32_MAX
225 #define ACPI_SIZE_MAX ACPI_UINT32_MAX
227 #else
229 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */
231 #error unknown ACPI_MACHINE_WIDTH
232 #endif
234 /*******************************************************************************
236 * OS-dependent types
238 * If the defaults below are not appropriate for the host system, they can
239 * be defined in the OS-specific header, and this will take precedence.
241 ******************************************************************************/
243 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
245 #ifndef acpi_cpu_flags
246 #define acpi_cpu_flags acpi_size
247 #endif
249 /* Object returned from acpi_os_create_cache */
251 #ifndef acpi_cache_t
252 #ifdef ACPI_USE_LOCAL_CACHE
253 #define acpi_cache_t struct acpi_memory_list
254 #else
255 #define acpi_cache_t void *
256 #endif
257 #endif
260 * Synchronization objects - Mutexes, Semaphores, and spin_locks
262 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
264 * These macros are used if the host OS does not support a mutex object.
265 * Map the OSL Mutex interfaces to binary semaphores.
267 #define acpi_mutex acpi_semaphore
268 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
269 #define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle)
270 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
271 #define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1)
272 #endif
274 /* Configurable types for synchronization objects */
276 #ifndef acpi_spinlock
277 #define acpi_spinlock void *
278 #endif
280 #ifndef acpi_semaphore
281 #define acpi_semaphore void *
282 #endif
284 #ifndef acpi_mutex
285 #define acpi_mutex void *
286 #endif
288 /*******************************************************************************
290 * Compiler-dependent types
292 * If the defaults below are not appropriate for the host compiler, they can
293 * be defined in the compiler-specific header, and this will take precedence.
295 ******************************************************************************/
297 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
299 #ifndef acpi_uintptr_t
300 #define acpi_uintptr_t void *
301 #endif
304 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
305 * some compilers can catch printf format string problems
307 #ifndef ACPI_PRINTF_LIKE
308 #define ACPI_PRINTF_LIKE(c)
309 #endif
312 * Some compilers complain about unused variables. Sometimes we don't want to
313 * use all the variables (for example, _acpi_module_name). This allows us
314 * to tell the compiler in a per-variable manner that a variable
315 * is unused
317 #ifndef ACPI_UNUSED_VAR
318 #define ACPI_UNUSED_VAR
319 #endif
322 * All ACPICA external functions that are available to the rest of the kernel
323 * are tagged with thes macros which can be defined as appropriate for the host.
325 * Notes:
326 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination
327 * interfaces that may need special processing.
328 * ACPI_EXPORT_SYMBOL is used for all other public external functions.
330 #ifndef ACPI_EXPORT_SYMBOL_INIT
331 #define ACPI_EXPORT_SYMBOL_INIT(symbol)
332 #endif
334 #ifndef ACPI_EXPORT_SYMBOL
335 #define ACPI_EXPORT_SYMBOL(symbol)
336 #endif
339 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA
340 * utilities only.
342 #ifndef ACPI_DEBUG_INITIALIZE
343 #define ACPI_DEBUG_INITIALIZE()
344 #endif
346 /*******************************************************************************
348 * Configuration
350 ******************************************************************************/
352 #ifdef ACPI_NO_MEM_ALLOCATIONS
354 #define ACPI_ALLOCATE(a) NULL
355 #define ACPI_ALLOCATE_ZEROED(a) NULL
356 #define ACPI_FREE(a)
357 #define ACPI_MEM_TRACKING(a)
359 #else /* ACPI_NO_MEM_ALLOCATIONS */
361 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
363 * Memory allocation tracking (used by acpi_exec to detect memory leaks)
365 #define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__
366 #define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
367 #define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
368 #define ACPI_FREE(a) acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS)
369 #define ACPI_MEM_TRACKING(a) a
371 #else
373 * Normal memory allocation directly via the OS services layer
375 #define ACPI_ALLOCATE(a) acpi_os_allocate ((acpi_size) (a))
376 #define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed ((acpi_size) (a))
377 #define ACPI_FREE(a) acpi_os_free (a)
378 #define ACPI_MEM_TRACKING(a)
380 #endif /* ACPI_DBG_TRACK_ALLOCATIONS */
382 #endif /* ACPI_NO_MEM_ALLOCATIONS */
384 /******************************************************************************
386 * ACPI Specification constants (Do not change unless the specification changes)
388 *****************************************************************************/
390 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
392 #define ACPI_MAX_GPE_BLOCKS 2
394 /* Default ACPI register widths */
396 #define ACPI_GPE_REGISTER_WIDTH 8
397 #define ACPI_PM1_REGISTER_WIDTH 16
398 #define ACPI_PM2_REGISTER_WIDTH 8
399 #define ACPI_PM_TIMER_WIDTH 32
400 #define ACPI_RESET_REGISTER_WIDTH 8
402 /* Names within the namespace are 4 bytes long */
404 #define ACPI_NAME_SIZE 4
405 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */
406 #define ACPI_PATH_SEPARATOR '.'
408 /* Sizes for ACPI table headers */
410 #define ACPI_OEM_ID_SIZE 6
411 #define ACPI_OEM_TABLE_ID_SIZE 8
413 /* ACPI/PNP hardware IDs */
415 #define PCI_ROOT_HID_STRING "PNP0A03"
416 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08"
418 /* PM Timer ticks per second (HZ) */
420 #define ACPI_PM_TIMER_FREQUENCY 3579545
422 /*******************************************************************************
424 * Independent types
426 ******************************************************************************/
428 /* Logical defines and NULL */
430 #ifdef FALSE
431 #undef FALSE
432 #endif
433 #define FALSE (1 == 0)
435 #ifdef TRUE
436 #undef TRUE
437 #endif
438 #define TRUE (1 == 1)
440 #ifndef NULL
441 #define NULL (void *) 0
442 #endif
445 * Miscellaneous types
447 typedef u32 acpi_status; /* All ACPI Exceptions */
448 typedef u32 acpi_name; /* 4-byte ACPI name */
449 typedef char *acpi_string; /* Null terminated ASCII string */
450 typedef void *acpi_handle; /* Actually a ptr to a NS Node */
452 /* Time constants for timer calculations */
454 #define ACPI_MSEC_PER_SEC 1000L
456 #define ACPI_USEC_PER_MSEC 1000L
457 #define ACPI_USEC_PER_SEC 1000000L
459 #define ACPI_100NSEC_PER_USEC 10L
460 #define ACPI_100NSEC_PER_MSEC 10000L
461 #define ACPI_100NSEC_PER_SEC 10000000L
463 #define ACPI_NSEC_PER_USEC 1000L
464 #define ACPI_NSEC_PER_MSEC 1000000L
465 #define ACPI_NSEC_PER_SEC 1000000000L
467 /* Owner IDs are used to track namespace nodes for selective deletion */
469 typedef u8 acpi_owner_id;
470 #define ACPI_OWNER_ID_MAX 0xFF
472 #define ACPI_INTEGER_BIT_SIZE 64
473 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
474 #define ACPI_MAX64_DECIMAL_DIGITS 20
475 #define ACPI_MAX32_DECIMAL_DIGITS 10
476 #define ACPI_MAX16_DECIMAL_DIGITS 5
477 #define ACPI_MAX8_DECIMAL_DIGITS 3
480 * Constants with special meanings
482 #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
483 #define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */
484 #define ACPI_DO_NOT_WAIT 0
487 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits.
488 * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this
489 * pertains to the ACPI integer type only, not to other integers used in the
490 * implementation of the ACPICA subsystem.
492 * 01/2010: This type is obsolete and has been removed from the entire ACPICA
493 * code base. It remains here for compatibility with device drivers that use
494 * the type. However, it will be removed in the future.
496 typedef u64 acpi_integer;
497 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX
499 /*******************************************************************************
501 * Commonly used macros
503 ******************************************************************************/
505 /* Data manipulation */
507 #define ACPI_LOBYTE(integer) ((u8) (u16)(integer))
508 #define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8))
509 #define ACPI_LOWORD(integer) ((u16) (u32)(integer))
510 #define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16))
511 #define ACPI_LODWORD(integer64) ((u32) (u64)(integer64))
512 #define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32))
514 #define ACPI_SET_BIT(target,bit) ((target) |= (bit))
515 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit))
516 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b))
517 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b))
519 /* Size calculation */
521 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0]))
523 /* Pointer manipulation */
525 #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
526 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
527 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
528 #define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) - (acpi_size)(b)))
529 #define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))
531 /* Pointer/Integer type conversions */
533 #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i)
534 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL)
535 #define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) NULL)
536 #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
537 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
539 /* Optimizations for 4-character (32-bit) acpi_name manipulation */
541 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
542 #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
543 #define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
544 #else
545 #define ACPI_COMPARE_NAME(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
546 #define ACPI_MOVE_NAME(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE))
547 #endif
549 /* Support for the special RSDP signature (8 characters) */
551 #define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8))
552 #define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8))
554 /*******************************************************************************
556 * Miscellaneous constants
558 ******************************************************************************/
561 * Initialization sequence
563 #define ACPI_FULL_INITIALIZATION 0x00
564 #define ACPI_NO_ADDRESS_SPACE_INIT 0x01
565 #define ACPI_NO_HARDWARE_INIT 0x02
566 #define ACPI_NO_EVENT_INIT 0x04
567 #define ACPI_NO_HANDLER_INIT 0x08
568 #define ACPI_NO_ACPI_ENABLE 0x10
569 #define ACPI_NO_DEVICE_INIT 0x20
570 #define ACPI_NO_OBJECT_INIT 0x40
571 #define ACPI_NO_FACS_INIT 0x80
574 * Initialization state
576 #define ACPI_SUBSYSTEM_INITIALIZE 0x01
577 #define ACPI_INITIALIZED_OK 0x02
580 * Power state values
582 #define ACPI_STATE_UNKNOWN (u8) 0xFF
584 #define ACPI_STATE_S0 (u8) 0
585 #define ACPI_STATE_S1 (u8) 1
586 #define ACPI_STATE_S2 (u8) 2
587 #define ACPI_STATE_S3 (u8) 3
588 #define ACPI_STATE_S4 (u8) 4
589 #define ACPI_STATE_S5 (u8) 5
590 #define ACPI_S_STATES_MAX ACPI_STATE_S5
591 #define ACPI_S_STATE_COUNT 6
593 #define ACPI_STATE_D0 (u8) 0
594 #define ACPI_STATE_D1 (u8) 1
595 #define ACPI_STATE_D2 (u8) 2
596 #define ACPI_STATE_D3_HOT (u8) 3
597 #define ACPI_STATE_D3 (u8) 4
598 #define ACPI_STATE_D3_COLD ACPI_STATE_D3
599 #define ACPI_D_STATES_MAX ACPI_STATE_D3
600 #define ACPI_D_STATE_COUNT 5
602 #define ACPI_STATE_C0 (u8) 0
603 #define ACPI_STATE_C1 (u8) 1
604 #define ACPI_STATE_C2 (u8) 2
605 #define ACPI_STATE_C3 (u8) 3
606 #define ACPI_C_STATES_MAX ACPI_STATE_C3
607 #define ACPI_C_STATE_COUNT 4
610 * Sleep type invalid value
612 #define ACPI_SLEEP_TYPE_MAX 0x7
613 #define ACPI_SLEEP_TYPE_INVALID 0xFF
616 * Standard notify values
618 #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00
619 #define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01
620 #define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02
621 #define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03
622 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04
623 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05
624 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06
625 #define ACPI_NOTIFY_POWER_FAULT (u8) 0x07
626 #define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08
627 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09
628 #define ACPI_NOTIFY_RESERVED (u8) 0x0A
629 #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B
630 #define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C
631 #define ACPI_NOTIFY_AFFINITY_UPDATE (u8) 0x0D
633 #define ACPI_GENERIC_NOTIFY_MAX 0x0D
634 #define ACPI_SPECIFIC_NOTIFY_MAX 0x84
637 * Types associated with ACPI names and objects. The first group of
638 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
639 * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
640 * only add to the first group if the spec changes.
642 * NOTE: Types must be kept in sync with the global acpi_ns_properties
643 * and acpi_ns_type_names arrays.
645 typedef u32 acpi_object_type;
647 #define ACPI_TYPE_ANY 0x00
648 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */
649 #define ACPI_TYPE_STRING 0x02
650 #define ACPI_TYPE_BUFFER 0x03
651 #define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */
652 #define ACPI_TYPE_FIELD_UNIT 0x05
653 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */
654 #define ACPI_TYPE_EVENT 0x07
655 #define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */
656 #define ACPI_TYPE_MUTEX 0x09
657 #define ACPI_TYPE_REGION 0x0A
658 #define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */
659 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */
660 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */
661 #define ACPI_TYPE_BUFFER_FIELD 0x0E
662 #define ACPI_TYPE_DDB_HANDLE 0x0F
663 #define ACPI_TYPE_DEBUG_OBJECT 0x10
665 #define ACPI_TYPE_EXTERNAL_MAX 0x10
666 #define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1)
669 * These are object types that do not map directly to the ACPI
670 * object_type() operator. They are used for various internal purposes only.
671 * If new predefined ACPI_TYPEs are added (via the ACPI specification), these
672 * internal types must move upwards. (There is code that depends on these
673 * values being contiguous with the external types above.)
675 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11
676 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12
677 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13
678 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */
679 #define ACPI_TYPE_LOCAL_ALIAS 0x15
680 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16
681 #define ACPI_TYPE_LOCAL_NOTIFY 0x17
682 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
683 #define ACPI_TYPE_LOCAL_RESOURCE 0x19
684 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A
685 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */
687 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */
688 #define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1)
691 * These are special object types that never appear in
692 * a Namespace node, only in an object of union acpi_operand_object
694 #define ACPI_TYPE_LOCAL_EXTRA 0x1C
695 #define ACPI_TYPE_LOCAL_DATA 0x1D
697 #define ACPI_TYPE_LOCAL_MAX 0x1D
699 /* All types above here are invalid */
701 #define ACPI_TYPE_INVALID 0x1E
702 #define ACPI_TYPE_NOT_FOUND 0xFF
704 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1)
707 * All I/O
709 #define ACPI_READ 0
710 #define ACPI_WRITE 1
711 #define ACPI_IO_MASK 1
714 * Event Types: Fixed & General Purpose
716 typedef u32 acpi_event_type;
719 * Fixed events
721 #define ACPI_EVENT_PMTIMER 0
722 #define ACPI_EVENT_GLOBAL 1
723 #define ACPI_EVENT_POWER_BUTTON 2
724 #define ACPI_EVENT_SLEEP_BUTTON 3
725 #define ACPI_EVENT_RTC 4
726 #define ACPI_EVENT_MAX 4
727 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
730 * Event status - Per event
731 * -------------
732 * The encoding of acpi_event_status is illustrated below.
733 * Note that a set bit (1) indicates the property is TRUE
734 * (e.g. if bit 0 is set then the event is enabled).
735 * +-------------+-+-+-+-+-+
736 * | Bits 31:5 |4|3|2|1|0|
737 * +-------------+-+-+-+-+-+
738 * | | | | | |
739 * | | | | | +- Enabled?
740 * | | | | +--- Enabled for wake?
741 * | | | +----- Status bit set?
742 * | | +------- Enable bit set?
743 * | +--------- Has a handler?
744 * +--------------- <Reserved>
746 typedef u32 acpi_event_status;
748 #define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00
749 #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01
750 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02
751 #define ACPI_EVENT_FLAG_STATUS_SET (acpi_event_status) 0x04
752 #define ACPI_EVENT_FLAG_ENABLE_SET (acpi_event_status) 0x08
753 #define ACPI_EVENT_FLAG_HAS_HANDLER (acpi_event_status) 0x10
754 #define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET
756 /* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */
758 #define ACPI_GPE_ENABLE 0
759 #define ACPI_GPE_DISABLE 1
760 #define ACPI_GPE_CONDITIONAL_ENABLE 2
763 * GPE info flags - Per GPE
764 * +-------+-+-+---+
765 * | 7:5 |4|3|2:0|
766 * +-------+-+-+---+
767 * | | | |
768 * | | | +-- Type of dispatch:to method, handler, notify, or none
769 * | | +----- Interrupt type: edge or level triggered
770 * | +------- Is a Wake GPE
771 * +------------ <Reserved>
773 #define ACPI_GPE_DISPATCH_NONE (u8) 0x00
774 #define ACPI_GPE_DISPATCH_METHOD (u8) 0x01
775 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02
776 #define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03
777 #define ACPI_GPE_DISPATCH_RAW_HANDLER (u8) 0x04
778 #define ACPI_GPE_DISPATCH_MASK (u8) 0x07
779 #define ACPI_GPE_DISPATCH_TYPE(flags) ((u8) ((flags) & ACPI_GPE_DISPATCH_MASK))
781 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x08
782 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
783 #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08
785 #define ACPI_GPE_CAN_WAKE (u8) 0x10
788 * Flags for GPE and Lock interfaces
790 #define ACPI_NOT_ISR 0x1
791 #define ACPI_ISR 0x0
793 /* Notify types */
795 #define ACPI_SYSTEM_NOTIFY 0x1
796 #define ACPI_DEVICE_NOTIFY 0x2
797 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
798 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
799 #define ACPI_NUM_NOTIFY_TYPES 2
801 #define ACPI_MAX_SYS_NOTIFY 0x7F
802 #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
804 #define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */
805 #define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */
807 /* Address Space (Operation Region) Types */
809 typedef u8 acpi_adr_space_type;
811 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0
812 #define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1
813 #define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2
814 #define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3
815 #define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4
816 #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5
817 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6
818 #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7
819 #define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8
820 #define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9
821 #define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10
823 #define ACPI_NUM_PREDEFINED_REGIONS 11
826 * Special Address Spaces
828 * Note: A Data Table region is a special type of operation region
829 * that has its own AML opcode. However, internally, the AML
830 * interpreter simply creates an operation region with an an address
831 * space type of ACPI_ADR_SPACE_DATA_TABLE.
833 #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */
834 #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F
836 /* Values for _REG connection code */
838 #define ACPI_REG_DISCONNECT 0
839 #define ACPI_REG_CONNECT 1
842 * bit_register IDs
844 * These values are intended to be used by the hardware interfaces
845 * and are mapped to individual bitfields defined within the ACPI
846 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
847 * for this mapping.
850 /* PM1 Status register */
852 #define ACPI_BITREG_TIMER_STATUS 0x00
853 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01
854 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02
855 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03
856 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04
857 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05
858 #define ACPI_BITREG_WAKE_STATUS 0x06
859 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07
861 /* PM1 Enable register */
863 #define ACPI_BITREG_TIMER_ENABLE 0x08
864 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09
865 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A
866 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B
867 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C
868 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D
870 /* PM1 Control register */
872 #define ACPI_BITREG_SCI_ENABLE 0x0E
873 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F
874 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10
875 #define ACPI_BITREG_SLEEP_TYPE 0x11
876 #define ACPI_BITREG_SLEEP_ENABLE 0x12
878 /* PM2 Control register */
880 #define ACPI_BITREG_ARB_DISABLE 0x13
882 #define ACPI_BITREG_MAX 0x13
883 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1
885 /* Status register values. A 1 clears a status bit. 0 = no effect */
887 #define ACPI_CLEAR_STATUS 1
889 /* Enable and Control register values */
891 #define ACPI_ENABLE_EVENT 1
892 #define ACPI_DISABLE_EVENT 0
894 /* Sleep function dispatch */
896 typedef acpi_status (*acpi_sleep_function) (u8 sleep_state);
898 struct acpi_sleep_functions {
899 acpi_sleep_function legacy_function;
900 acpi_sleep_function extended_function;
904 * External ACPI object definition
908 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element
909 * or an unresolved named reference.
911 union acpi_object {
912 acpi_object_type type; /* See definition of acpi_ns_type for values */
913 struct {
914 acpi_object_type type; /* ACPI_TYPE_INTEGER */
915 u64 value; /* The actual number */
916 } integer;
918 struct {
919 acpi_object_type type; /* ACPI_TYPE_STRING */
920 u32 length; /* # of bytes in string, excluding trailing null */
921 char *pointer; /* points to the string value */
922 } string;
924 struct {
925 acpi_object_type type; /* ACPI_TYPE_BUFFER */
926 u32 length; /* # of bytes in buffer */
927 u8 *pointer; /* points to the buffer */
928 } buffer;
930 struct {
931 acpi_object_type type; /* ACPI_TYPE_PACKAGE */
932 u32 count; /* # of elements in package */
933 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */
934 } package;
936 struct {
937 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */
938 acpi_object_type actual_type; /* Type associated with the Handle */
939 acpi_handle handle; /* object reference */
940 } reference;
942 struct {
943 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */
944 u32 proc_id;
945 acpi_io_address pblk_address;
946 u32 pblk_length;
947 } processor;
949 struct {
950 acpi_object_type type; /* ACPI_TYPE_POWER */
951 u32 system_level;
952 u32 resource_order;
953 } power_resource;
957 * List of objects, used as a parameter list for control method evaluation
959 struct acpi_object_list {
960 u32 count;
961 union acpi_object *pointer;
965 * Miscellaneous common Data Structures used by the interfaces
967 #define ACPI_NO_BUFFER 0
969 #ifdef ACPI_NO_MEM_ALLOCATIONS
971 #define ACPI_ALLOCATE_BUFFER (acpi_size) (0)
972 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (0)
974 #else /* ACPI_NO_MEM_ALLOCATIONS */
976 #define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) /* Let ACPICA allocate buffer */
977 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) /* For internal use only (enables tracking) */
979 #endif /* ACPI_NO_MEM_ALLOCATIONS */
981 struct acpi_buffer {
982 acpi_size length; /* Length in bytes of the buffer */
983 void *pointer; /* pointer to buffer */
987 * name_type for acpi_get_name
989 #define ACPI_FULL_PATHNAME 0
990 #define ACPI_SINGLE_NAME 1
991 #define ACPI_FULL_PATHNAME_NO_TRAILING 2
992 #define ACPI_NAME_TYPE_MAX 2
995 * Predefined Namespace items
997 struct acpi_predefined_names {
998 const char *name;
999 u8 type;
1000 char *val;
1004 * Structure and flags for acpi_get_system_info
1006 #define ACPI_SYS_MODE_UNKNOWN 0x0000
1007 #define ACPI_SYS_MODE_ACPI 0x0001
1008 #define ACPI_SYS_MODE_LEGACY 0x0002
1009 #define ACPI_SYS_MODES_MASK 0x0003
1012 * System info returned by acpi_get_system_info()
1014 struct acpi_system_info {
1015 u32 acpi_ca_version;
1016 u32 flags;
1017 u32 timer_resolution;
1018 u32 reserved1;
1019 u32 reserved2;
1020 u32 debug_level;
1021 u32 debug_layer;
1025 * System statistics returned by acpi_get_statistics()
1027 struct acpi_statistics {
1028 u32 sci_count;
1029 u32 gpe_count;
1030 u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS];
1031 u32 method_count;
1034 /* Table Event Types */
1036 #define ACPI_TABLE_EVENT_LOAD 0x0
1037 #define ACPI_TABLE_EVENT_UNLOAD 0x1
1038 #define ACPI_NUM_TABLE_EVENTS 2
1041 * Types specific to the OS service interfaces
1043 typedef u32
1044 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
1046 typedef void
1047 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
1050 * Various handlers and callback procedures
1052 typedef
1053 u32 (*acpi_sci_handler) (void *context);
1055 typedef
1056 void (*acpi_gbl_event_handler) (u32 event_type,
1057 acpi_handle device,
1058 u32 event_number, void *context);
1060 #define ACPI_EVENT_TYPE_GPE 0
1061 #define ACPI_EVENT_TYPE_FIXED 1
1063 typedef
1064 u32(*acpi_event_handler) (void *context);
1066 typedef
1067 u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
1069 typedef
1070 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
1072 typedef
1073 void (*acpi_object_handler) (acpi_handle object, void *data);
1075 typedef
1076 acpi_status (*acpi_init_handler) (acpi_handle object, u32 function);
1078 #define ACPI_INIT_DEVICE_INI 1
1080 typedef
1081 acpi_status (*acpi_exception_handler) (acpi_status aml_status,
1082 acpi_name name,
1083 u16 opcode,
1084 u32 aml_offset, void *context);
1086 /* Table Event handler (Load, load_table, etc.) and types */
1088 typedef
1089 acpi_status (*acpi_table_handler) (u32 event, void *table, void *context);
1091 #define ACPI_TABLE_LOAD 0x0
1092 #define ACPI_TABLE_UNLOAD 0x1
1093 #define ACPI_NUM_TABLE_EVENTS 2
1095 /* Address Spaces (For Operation Regions) */
1097 typedef
1098 acpi_status (*acpi_adr_space_handler) (u32 function,
1099 acpi_physical_address address,
1100 u32 bit_width,
1101 u64 *value,
1102 void *handler_context,
1103 void *region_context);
1105 #define ACPI_DEFAULT_HANDLER NULL
1107 /* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */
1109 struct acpi_connection_info {
1110 u8 *connection;
1111 u16 length;
1112 u8 access_length;
1115 typedef
1116 acpi_status (*acpi_adr_space_setup) (acpi_handle region_handle,
1117 u32 function,
1118 void *handler_context,
1119 void **region_context);
1121 #define ACPI_REGION_ACTIVATE 0
1122 #define ACPI_REGION_DEACTIVATE 1
1124 typedef
1125 acpi_status (*acpi_walk_callback) (acpi_handle object,
1126 u32 nesting_level,
1127 void *context, void **return_value);
1129 typedef
1130 u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
1132 /* Interrupt handler return values */
1134 #define ACPI_INTERRUPT_NOT_HANDLED 0x00
1135 #define ACPI_INTERRUPT_HANDLED 0x01
1137 /* GPE handler return values */
1139 #define ACPI_REENABLE_GPE 0x80
1141 /* Length of 32-bit EISAID values when converted back to a string */
1143 #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */
1145 /* Length of UUID (string) values */
1147 #define ACPI_UUID_LENGTH 16
1149 /* Length of 3-byte PCI class code values when converted back to a string */
1151 #define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */
1153 /* Structures used for device/processor HID, UID, CID */
1155 struct acpi_pnp_device_id {
1156 u32 length; /* Length of string + null */
1157 char *string;
1160 struct acpi_pnp_device_id_list {
1161 u32 count; /* Number of IDs in Ids array */
1162 u32 list_size; /* Size of list, including ID strings */
1163 struct acpi_pnp_device_id ids[1]; /* ID array */
1167 * Structure returned from acpi_get_object_info.
1168 * Optimized for both 32- and 64-bit builds
1170 struct acpi_device_info {
1171 u32 info_size; /* Size of info, including ID strings */
1172 u32 name; /* ACPI object Name */
1173 acpi_object_type type; /* ACPI object Type */
1174 u8 param_count; /* If a method, required parameter count */
1175 u16 valid; /* Indicates which optional fields are valid */
1176 u8 flags; /* Miscellaneous info */
1177 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
1178 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
1179 u32 current_status; /* _STA value */
1180 u64 address; /* _ADR value */
1181 struct acpi_pnp_device_id hardware_id; /* _HID value */
1182 struct acpi_pnp_device_id unique_id; /* _UID value */
1183 struct acpi_pnp_device_id class_code; /* _CLS value */
1184 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */
1187 /* Values for Flags field above (acpi_get_object_info) */
1189 #define ACPI_PCI_ROOT_BRIDGE 0x01
1191 /* Flags for Valid field above (acpi_get_object_info) */
1193 #define ACPI_VALID_STA 0x0001
1194 #define ACPI_VALID_ADR 0x0002
1195 #define ACPI_VALID_HID 0x0004
1196 #define ACPI_VALID_UID 0x0008
1197 #define ACPI_VALID_CID 0x0020
1198 #define ACPI_VALID_CLS 0x0040
1199 #define ACPI_VALID_SXDS 0x0100
1200 #define ACPI_VALID_SXWS 0x0200
1202 /* Flags for _STA method */
1204 #define ACPI_STA_DEVICE_PRESENT 0x01
1205 #define ACPI_STA_DEVICE_ENABLED 0x02
1206 #define ACPI_STA_DEVICE_UI 0x04
1207 #define ACPI_STA_DEVICE_FUNCTIONING 0x08
1208 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */
1209 #define ACPI_STA_BATTERY_PRESENT 0x10
1211 /* Context structs for address space handlers */
1213 struct acpi_pci_id {
1214 u16 segment;
1215 u16 bus;
1216 u16 device;
1217 u16 function;
1220 struct acpi_mem_space_context {
1221 u32 length;
1222 acpi_physical_address address;
1223 acpi_physical_address mapped_physical_address;
1224 u8 *mapped_logical_address;
1225 acpi_size mapped_length;
1229 * struct acpi_memory_list is used only if the ACPICA local cache is enabled
1231 struct acpi_memory_list {
1232 const char *list_name;
1233 void *list_head;
1234 u16 object_size;
1235 u16 max_depth;
1236 u16 current_depth;
1238 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
1240 /* Statistics for debug memory tracking only */
1242 u32 total_allocated;
1243 u32 total_freed;
1244 u32 max_occupied;
1245 u32 total_size;
1246 u32 current_total_size;
1247 u32 requests;
1248 u32 hits;
1249 #endif
1252 /* Definitions of trace event types */
1254 typedef enum {
1255 ACPI_TRACE_AML_METHOD,
1256 ACPI_TRACE_AML_OPCODE,
1257 ACPI_TRACE_AML_REGION
1258 } acpi_trace_event_type;
1260 /* Definitions of _OSI support */
1262 #define ACPI_VENDOR_STRINGS 0x01
1263 #define ACPI_FEATURE_STRINGS 0x02
1264 #define ACPI_ENABLE_INTERFACES 0x00
1265 #define ACPI_DISABLE_INTERFACES 0x04
1267 #define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1268 #define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1269 #define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1270 #define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1271 #define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1272 #define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1274 #define ACPI_OSI_WIN_2000 0x01
1275 #define ACPI_OSI_WIN_XP 0x02
1276 #define ACPI_OSI_WIN_XP_SP1 0x03
1277 #define ACPI_OSI_WINSRV_2003 0x04
1278 #define ACPI_OSI_WIN_XP_SP2 0x05
1279 #define ACPI_OSI_WINSRV_2003_SP1 0x06
1280 #define ACPI_OSI_WIN_VISTA 0x07
1281 #define ACPI_OSI_WINSRV_2008 0x08
1282 #define ACPI_OSI_WIN_VISTA_SP1 0x09
1283 #define ACPI_OSI_WIN_VISTA_SP2 0x0A
1284 #define ACPI_OSI_WIN_7 0x0B
1285 #define ACPI_OSI_WIN_8 0x0C
1286 #define ACPI_OSI_WIN_10 0x0D
1288 /* Definitions of file IO */
1290 #define ACPI_FILE_READING 0x01
1291 #define ACPI_FILE_WRITING 0x02
1292 #define ACPI_FILE_BINARY 0x04
1294 #define ACPI_FILE_BEGIN 0x01
1295 #define ACPI_FILE_END 0x02
1297 /* Definitions of getopt */
1299 #define ACPI_OPT_END -1
1301 #endif /* __ACTYPES_H__ */