Linux 4.8.3
[linux/fpc-iii.git] / ipc / sem.c
blob7c9d4f7683c073de736a0723a0c0d7a1e3178ad2
1 /*
2 * linux/ipc/sem.c
3 * Copyright (C) 1992 Krishna Balasubramanian
4 * Copyright (C) 1995 Eric Schenk, Bruno Haible
6 * /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie <dragos@iname.com>
8 * SMP-threaded, sysctl's added
9 * (c) 1999 Manfred Spraul <manfred@colorfullife.com>
10 * Enforced range limit on SEM_UNDO
11 * (c) 2001 Red Hat Inc
12 * Lockless wakeup
13 * (c) 2003 Manfred Spraul <manfred@colorfullife.com>
14 * Further wakeup optimizations, documentation
15 * (c) 2010 Manfred Spraul <manfred@colorfullife.com>
17 * support for audit of ipc object properties and permission changes
18 * Dustin Kirkland <dustin.kirkland@us.ibm.com>
20 * namespaces support
21 * OpenVZ, SWsoft Inc.
22 * Pavel Emelianov <xemul@openvz.org>
24 * Implementation notes: (May 2010)
25 * This file implements System V semaphores.
27 * User space visible behavior:
28 * - FIFO ordering for semop() operations (just FIFO, not starvation
29 * protection)
30 * - multiple semaphore operations that alter the same semaphore in
31 * one semop() are handled.
32 * - sem_ctime (time of last semctl()) is updated in the IPC_SET, SETVAL and
33 * SETALL calls.
34 * - two Linux specific semctl() commands: SEM_STAT, SEM_INFO.
35 * - undo adjustments at process exit are limited to 0..SEMVMX.
36 * - namespace are supported.
37 * - SEMMSL, SEMMNS, SEMOPM and SEMMNI can be configured at runtine by writing
38 * to /proc/sys/kernel/sem.
39 * - statistics about the usage are reported in /proc/sysvipc/sem.
41 * Internals:
42 * - scalability:
43 * - all global variables are read-mostly.
44 * - semop() calls and semctl(RMID) are synchronized by RCU.
45 * - most operations do write operations (actually: spin_lock calls) to
46 * the per-semaphore array structure.
47 * Thus: Perfect SMP scaling between independent semaphore arrays.
48 * If multiple semaphores in one array are used, then cache line
49 * trashing on the semaphore array spinlock will limit the scaling.
50 * - semncnt and semzcnt are calculated on demand in count_semcnt()
51 * - the task that performs a successful semop() scans the list of all
52 * sleeping tasks and completes any pending operations that can be fulfilled.
53 * Semaphores are actively given to waiting tasks (necessary for FIFO).
54 * (see update_queue())
55 * - To improve the scalability, the actual wake-up calls are performed after
56 * dropping all locks. (see wake_up_sem_queue_prepare(),
57 * wake_up_sem_queue_do())
58 * - All work is done by the waker, the woken up task does not have to do
59 * anything - not even acquiring a lock or dropping a refcount.
60 * - A woken up task may not even touch the semaphore array anymore, it may
61 * have been destroyed already by a semctl(RMID).
62 * - The synchronizations between wake-ups due to a timeout/signal and a
63 * wake-up due to a completed semaphore operation is achieved by using an
64 * intermediate state (IN_WAKEUP).
65 * - UNDO values are stored in an array (one per process and per
66 * semaphore array, lazily allocated). For backwards compatibility, multiple
67 * modes for the UNDO variables are supported (per process, per thread)
68 * (see copy_semundo, CLONE_SYSVSEM)
69 * - There are two lists of the pending operations: a per-array list
70 * and per-semaphore list (stored in the array). This allows to achieve FIFO
71 * ordering without always scanning all pending operations.
72 * The worst-case behavior is nevertheless O(N^2) for N wakeups.
75 #include <linux/slab.h>
76 #include <linux/spinlock.h>
77 #include <linux/init.h>
78 #include <linux/proc_fs.h>
79 #include <linux/time.h>
80 #include <linux/security.h>
81 #include <linux/syscalls.h>
82 #include <linux/audit.h>
83 #include <linux/capability.h>
84 #include <linux/seq_file.h>
85 #include <linux/rwsem.h>
86 #include <linux/nsproxy.h>
87 #include <linux/ipc_namespace.h>
89 #include <linux/uaccess.h>
90 #include "util.h"
92 /* One semaphore structure for each semaphore in the system. */
93 struct sem {
94 int semval; /* current value */
96 * PID of the process that last modified the semaphore. For
97 * Linux, specifically these are:
98 * - semop
99 * - semctl, via SETVAL and SETALL.
100 * - at task exit when performing undo adjustments (see exit_sem).
102 int sempid;
103 spinlock_t lock; /* spinlock for fine-grained semtimedop */
104 struct list_head pending_alter; /* pending single-sop operations */
105 /* that alter the semaphore */
106 struct list_head pending_const; /* pending single-sop operations */
107 /* that do not alter the semaphore*/
108 time_t sem_otime; /* candidate for sem_otime */
109 } ____cacheline_aligned_in_smp;
111 /* One queue for each sleeping process in the system. */
112 struct sem_queue {
113 struct list_head list; /* queue of pending operations */
114 struct task_struct *sleeper; /* this process */
115 struct sem_undo *undo; /* undo structure */
116 int pid; /* process id of requesting process */
117 int status; /* completion status of operation */
118 struct sembuf *sops; /* array of pending operations */
119 struct sembuf *blocking; /* the operation that blocked */
120 int nsops; /* number of operations */
121 int alter; /* does *sops alter the array? */
124 /* Each task has a list of undo requests. They are executed automatically
125 * when the process exits.
127 struct sem_undo {
128 struct list_head list_proc; /* per-process list: *
129 * all undos from one process
130 * rcu protected */
131 struct rcu_head rcu; /* rcu struct for sem_undo */
132 struct sem_undo_list *ulp; /* back ptr to sem_undo_list */
133 struct list_head list_id; /* per semaphore array list:
134 * all undos for one array */
135 int semid; /* semaphore set identifier */
136 short *semadj; /* array of adjustments */
137 /* one per semaphore */
140 /* sem_undo_list controls shared access to the list of sem_undo structures
141 * that may be shared among all a CLONE_SYSVSEM task group.
143 struct sem_undo_list {
144 atomic_t refcnt;
145 spinlock_t lock;
146 struct list_head list_proc;
150 #define sem_ids(ns) ((ns)->ids[IPC_SEM_IDS])
152 #define sem_checkid(sma, semid) ipc_checkid(&sma->sem_perm, semid)
154 static int newary(struct ipc_namespace *, struct ipc_params *);
155 static void freeary(struct ipc_namespace *, struct kern_ipc_perm *);
156 #ifdef CONFIG_PROC_FS
157 static int sysvipc_sem_proc_show(struct seq_file *s, void *it);
158 #endif
160 #define SEMMSL_FAST 256 /* 512 bytes on stack */
161 #define SEMOPM_FAST 64 /* ~ 372 bytes on stack */
164 * Locking:
165 * sem_undo.id_next,
166 * sem_array.complex_count,
167 * sem_array.pending{_alter,_cont},
168 * sem_array.sem_undo: global sem_lock() for read/write
169 * sem_undo.proc_next: only "current" is allowed to read/write that field.
171 * sem_array.sem_base[i].pending_{const,alter}:
172 * global or semaphore sem_lock() for read/write
175 #define sc_semmsl sem_ctls[0]
176 #define sc_semmns sem_ctls[1]
177 #define sc_semopm sem_ctls[2]
178 #define sc_semmni sem_ctls[3]
180 void sem_init_ns(struct ipc_namespace *ns)
182 ns->sc_semmsl = SEMMSL;
183 ns->sc_semmns = SEMMNS;
184 ns->sc_semopm = SEMOPM;
185 ns->sc_semmni = SEMMNI;
186 ns->used_sems = 0;
187 ipc_init_ids(&ns->ids[IPC_SEM_IDS]);
190 #ifdef CONFIG_IPC_NS
191 void sem_exit_ns(struct ipc_namespace *ns)
193 free_ipcs(ns, &sem_ids(ns), freeary);
194 idr_destroy(&ns->ids[IPC_SEM_IDS].ipcs_idr);
196 #endif
198 void __init sem_init(void)
200 sem_init_ns(&init_ipc_ns);
201 ipc_init_proc_interface("sysvipc/sem",
202 " key semid perms nsems uid gid cuid cgid otime ctime\n",
203 IPC_SEM_IDS, sysvipc_sem_proc_show);
207 * unmerge_queues - unmerge queues, if possible.
208 * @sma: semaphore array
210 * The function unmerges the wait queues if complex_count is 0.
211 * It must be called prior to dropping the global semaphore array lock.
213 static void unmerge_queues(struct sem_array *sma)
215 struct sem_queue *q, *tq;
217 /* complex operations still around? */
218 if (sma->complex_count)
219 return;
221 * We will switch back to simple mode.
222 * Move all pending operation back into the per-semaphore
223 * queues.
225 list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
226 struct sem *curr;
227 curr = &sma->sem_base[q->sops[0].sem_num];
229 list_add_tail(&q->list, &curr->pending_alter);
231 INIT_LIST_HEAD(&sma->pending_alter);
235 * merge_queues - merge single semop queues into global queue
236 * @sma: semaphore array
238 * This function merges all per-semaphore queues into the global queue.
239 * It is necessary to achieve FIFO ordering for the pending single-sop
240 * operations when a multi-semop operation must sleep.
241 * Only the alter operations must be moved, the const operations can stay.
243 static void merge_queues(struct sem_array *sma)
245 int i;
246 for (i = 0; i < sma->sem_nsems; i++) {
247 struct sem *sem = sma->sem_base + i;
249 list_splice_init(&sem->pending_alter, &sma->pending_alter);
253 static void sem_rcu_free(struct rcu_head *head)
255 struct ipc_rcu *p = container_of(head, struct ipc_rcu, rcu);
256 struct sem_array *sma = ipc_rcu_to_struct(p);
258 security_sem_free(sma);
259 ipc_rcu_free(head);
263 * Wait until all currently ongoing simple ops have completed.
264 * Caller must own sem_perm.lock.
265 * New simple ops cannot start, because simple ops first check
266 * that sem_perm.lock is free.
267 * that a) sem_perm.lock is free and b) complex_count is 0.
269 static void sem_wait_array(struct sem_array *sma)
271 int i;
272 struct sem *sem;
274 if (sma->complex_count) {
275 /* The thread that increased sma->complex_count waited on
276 * all sem->lock locks. Thus we don't need to wait again.
278 return;
281 for (i = 0; i < sma->sem_nsems; i++) {
282 sem = sma->sem_base + i;
283 spin_unlock_wait(&sem->lock);
288 * If the request contains only one semaphore operation, and there are
289 * no complex transactions pending, lock only the semaphore involved.
290 * Otherwise, lock the entire semaphore array, since we either have
291 * multiple semaphores in our own semops, or we need to look at
292 * semaphores from other pending complex operations.
294 static inline int sem_lock(struct sem_array *sma, struct sembuf *sops,
295 int nsops)
297 struct sem *sem;
299 if (nsops != 1) {
300 /* Complex operation - acquire a full lock */
301 ipc_lock_object(&sma->sem_perm);
303 /* And wait until all simple ops that are processed
304 * right now have dropped their locks.
306 sem_wait_array(sma);
307 return -1;
311 * Only one semaphore affected - try to optimize locking.
312 * The rules are:
313 * - optimized locking is possible if no complex operation
314 * is either enqueued or processed right now.
315 * - The test for enqueued complex ops is simple:
316 * sma->complex_count != 0
317 * - Testing for complex ops that are processed right now is
318 * a bit more difficult. Complex ops acquire the full lock
319 * and first wait that the running simple ops have completed.
320 * (see above)
321 * Thus: If we own a simple lock and the global lock is free
322 * and complex_count is now 0, then it will stay 0 and
323 * thus just locking sem->lock is sufficient.
325 sem = sma->sem_base + sops->sem_num;
327 if (sma->complex_count == 0) {
329 * It appears that no complex operation is around.
330 * Acquire the per-semaphore lock.
332 spin_lock(&sem->lock);
334 /* Then check that the global lock is free */
335 if (!spin_is_locked(&sma->sem_perm.lock)) {
337 * We need a memory barrier with acquire semantics,
338 * otherwise we can race with another thread that does:
339 * complex_count++;
340 * spin_unlock(sem_perm.lock);
342 smp_acquire__after_ctrl_dep();
345 * Now repeat the test of complex_count:
346 * It can't change anymore until we drop sem->lock.
347 * Thus: if is now 0, then it will stay 0.
349 if (sma->complex_count == 0) {
350 /* fast path successful! */
351 return sops->sem_num;
354 spin_unlock(&sem->lock);
357 /* slow path: acquire the full lock */
358 ipc_lock_object(&sma->sem_perm);
360 if (sma->complex_count == 0) {
361 /* False alarm:
362 * There is no complex operation, thus we can switch
363 * back to the fast path.
365 spin_lock(&sem->lock);
366 ipc_unlock_object(&sma->sem_perm);
367 return sops->sem_num;
368 } else {
369 /* Not a false alarm, thus complete the sequence for a
370 * full lock.
372 sem_wait_array(sma);
373 return -1;
377 static inline void sem_unlock(struct sem_array *sma, int locknum)
379 if (locknum == -1) {
380 unmerge_queues(sma);
381 ipc_unlock_object(&sma->sem_perm);
382 } else {
383 struct sem *sem = sma->sem_base + locknum;
384 spin_unlock(&sem->lock);
389 * sem_lock_(check_) routines are called in the paths where the rwsem
390 * is not held.
392 * The caller holds the RCU read lock.
394 static inline struct sem_array *sem_obtain_lock(struct ipc_namespace *ns,
395 int id, struct sembuf *sops, int nsops, int *locknum)
397 struct kern_ipc_perm *ipcp;
398 struct sem_array *sma;
400 ipcp = ipc_obtain_object_idr(&sem_ids(ns), id);
401 if (IS_ERR(ipcp))
402 return ERR_CAST(ipcp);
404 sma = container_of(ipcp, struct sem_array, sem_perm);
405 *locknum = sem_lock(sma, sops, nsops);
407 /* ipc_rmid() may have already freed the ID while sem_lock
408 * was spinning: verify that the structure is still valid
410 if (ipc_valid_object(ipcp))
411 return container_of(ipcp, struct sem_array, sem_perm);
413 sem_unlock(sma, *locknum);
414 return ERR_PTR(-EINVAL);
417 static inline struct sem_array *sem_obtain_object(struct ipc_namespace *ns, int id)
419 struct kern_ipc_perm *ipcp = ipc_obtain_object_idr(&sem_ids(ns), id);
421 if (IS_ERR(ipcp))
422 return ERR_CAST(ipcp);
424 return container_of(ipcp, struct sem_array, sem_perm);
427 static inline struct sem_array *sem_obtain_object_check(struct ipc_namespace *ns,
428 int id)
430 struct kern_ipc_perm *ipcp = ipc_obtain_object_check(&sem_ids(ns), id);
432 if (IS_ERR(ipcp))
433 return ERR_CAST(ipcp);
435 return container_of(ipcp, struct sem_array, sem_perm);
438 static inline void sem_lock_and_putref(struct sem_array *sma)
440 sem_lock(sma, NULL, -1);
441 ipc_rcu_putref(sma, sem_rcu_free);
444 static inline void sem_rmid(struct ipc_namespace *ns, struct sem_array *s)
446 ipc_rmid(&sem_ids(ns), &s->sem_perm);
450 * Lockless wakeup algorithm:
451 * Without the check/retry algorithm a lockless wakeup is possible:
452 * - queue.status is initialized to -EINTR before blocking.
453 * - wakeup is performed by
454 * * unlinking the queue entry from the pending list
455 * * setting queue.status to IN_WAKEUP
456 * This is the notification for the blocked thread that a
457 * result value is imminent.
458 * * call wake_up_process
459 * * set queue.status to the final value.
460 * - the previously blocked thread checks queue.status:
461 * * if it's IN_WAKEUP, then it must wait until the value changes
462 * * if it's not -EINTR, then the operation was completed by
463 * update_queue. semtimedop can return queue.status without
464 * performing any operation on the sem array.
465 * * otherwise it must acquire the spinlock and check what's up.
467 * The two-stage algorithm is necessary to protect against the following
468 * races:
469 * - if queue.status is set after wake_up_process, then the woken up idle
470 * thread could race forward and try (and fail) to acquire sma->lock
471 * before update_queue had a chance to set queue.status
472 * - if queue.status is written before wake_up_process and if the
473 * blocked process is woken up by a signal between writing
474 * queue.status and the wake_up_process, then the woken up
475 * process could return from semtimedop and die by calling
476 * sys_exit before wake_up_process is called. Then wake_up_process
477 * will oops, because the task structure is already invalid.
478 * (yes, this happened on s390 with sysv msg).
481 #define IN_WAKEUP 1
484 * newary - Create a new semaphore set
485 * @ns: namespace
486 * @params: ptr to the structure that contains key, semflg and nsems
488 * Called with sem_ids.rwsem held (as a writer)
490 static int newary(struct ipc_namespace *ns, struct ipc_params *params)
492 int id;
493 int retval;
494 struct sem_array *sma;
495 int size;
496 key_t key = params->key;
497 int nsems = params->u.nsems;
498 int semflg = params->flg;
499 int i;
501 if (!nsems)
502 return -EINVAL;
503 if (ns->used_sems + nsems > ns->sc_semmns)
504 return -ENOSPC;
506 size = sizeof(*sma) + nsems * sizeof(struct sem);
507 sma = ipc_rcu_alloc(size);
508 if (!sma)
509 return -ENOMEM;
511 memset(sma, 0, size);
513 sma->sem_perm.mode = (semflg & S_IRWXUGO);
514 sma->sem_perm.key = key;
516 sma->sem_perm.security = NULL;
517 retval = security_sem_alloc(sma);
518 if (retval) {
519 ipc_rcu_putref(sma, ipc_rcu_free);
520 return retval;
523 sma->sem_base = (struct sem *) &sma[1];
525 for (i = 0; i < nsems; i++) {
526 INIT_LIST_HEAD(&sma->sem_base[i].pending_alter);
527 INIT_LIST_HEAD(&sma->sem_base[i].pending_const);
528 spin_lock_init(&sma->sem_base[i].lock);
531 sma->complex_count = 0;
532 INIT_LIST_HEAD(&sma->pending_alter);
533 INIT_LIST_HEAD(&sma->pending_const);
534 INIT_LIST_HEAD(&sma->list_id);
535 sma->sem_nsems = nsems;
536 sma->sem_ctime = get_seconds();
538 id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
539 if (id < 0) {
540 ipc_rcu_putref(sma, sem_rcu_free);
541 return id;
543 ns->used_sems += nsems;
545 sem_unlock(sma, -1);
546 rcu_read_unlock();
548 return sma->sem_perm.id;
553 * Called with sem_ids.rwsem and ipcp locked.
555 static inline int sem_security(struct kern_ipc_perm *ipcp, int semflg)
557 struct sem_array *sma;
559 sma = container_of(ipcp, struct sem_array, sem_perm);
560 return security_sem_associate(sma, semflg);
564 * Called with sem_ids.rwsem and ipcp locked.
566 static inline int sem_more_checks(struct kern_ipc_perm *ipcp,
567 struct ipc_params *params)
569 struct sem_array *sma;
571 sma = container_of(ipcp, struct sem_array, sem_perm);
572 if (params->u.nsems > sma->sem_nsems)
573 return -EINVAL;
575 return 0;
578 SYSCALL_DEFINE3(semget, key_t, key, int, nsems, int, semflg)
580 struct ipc_namespace *ns;
581 static const struct ipc_ops sem_ops = {
582 .getnew = newary,
583 .associate = sem_security,
584 .more_checks = sem_more_checks,
586 struct ipc_params sem_params;
588 ns = current->nsproxy->ipc_ns;
590 if (nsems < 0 || nsems > ns->sc_semmsl)
591 return -EINVAL;
593 sem_params.key = key;
594 sem_params.flg = semflg;
595 sem_params.u.nsems = nsems;
597 return ipcget(ns, &sem_ids(ns), &sem_ops, &sem_params);
601 * perform_atomic_semop - Perform (if possible) a semaphore operation
602 * @sma: semaphore array
603 * @q: struct sem_queue that describes the operation
605 * Returns 0 if the operation was possible.
606 * Returns 1 if the operation is impossible, the caller must sleep.
607 * Negative values are error codes.
609 static int perform_atomic_semop(struct sem_array *sma, struct sem_queue *q)
611 int result, sem_op, nsops, pid;
612 struct sembuf *sop;
613 struct sem *curr;
614 struct sembuf *sops;
615 struct sem_undo *un;
617 sops = q->sops;
618 nsops = q->nsops;
619 un = q->undo;
621 for (sop = sops; sop < sops + nsops; sop++) {
622 curr = sma->sem_base + sop->sem_num;
623 sem_op = sop->sem_op;
624 result = curr->semval;
626 if (!sem_op && result)
627 goto would_block;
629 result += sem_op;
630 if (result < 0)
631 goto would_block;
632 if (result > SEMVMX)
633 goto out_of_range;
635 if (sop->sem_flg & SEM_UNDO) {
636 int undo = un->semadj[sop->sem_num] - sem_op;
637 /* Exceeding the undo range is an error. */
638 if (undo < (-SEMAEM - 1) || undo > SEMAEM)
639 goto out_of_range;
640 un->semadj[sop->sem_num] = undo;
643 curr->semval = result;
646 sop--;
647 pid = q->pid;
648 while (sop >= sops) {
649 sma->sem_base[sop->sem_num].sempid = pid;
650 sop--;
653 return 0;
655 out_of_range:
656 result = -ERANGE;
657 goto undo;
659 would_block:
660 q->blocking = sop;
662 if (sop->sem_flg & IPC_NOWAIT)
663 result = -EAGAIN;
664 else
665 result = 1;
667 undo:
668 sop--;
669 while (sop >= sops) {
670 sem_op = sop->sem_op;
671 sma->sem_base[sop->sem_num].semval -= sem_op;
672 if (sop->sem_flg & SEM_UNDO)
673 un->semadj[sop->sem_num] += sem_op;
674 sop--;
677 return result;
680 /** wake_up_sem_queue_prepare(q, error): Prepare wake-up
681 * @q: queue entry that must be signaled
682 * @error: Error value for the signal
684 * Prepare the wake-up of the queue entry q.
686 static void wake_up_sem_queue_prepare(struct list_head *pt,
687 struct sem_queue *q, int error)
689 if (list_empty(pt)) {
691 * Hold preempt off so that we don't get preempted and have the
692 * wakee busy-wait until we're scheduled back on.
694 preempt_disable();
696 q->status = IN_WAKEUP;
697 q->pid = error;
699 list_add_tail(&q->list, pt);
703 * wake_up_sem_queue_do - do the actual wake-up
704 * @pt: list of tasks to be woken up
706 * Do the actual wake-up.
707 * The function is called without any locks held, thus the semaphore array
708 * could be destroyed already and the tasks can disappear as soon as the
709 * status is set to the actual return code.
711 static void wake_up_sem_queue_do(struct list_head *pt)
713 struct sem_queue *q, *t;
714 int did_something;
716 did_something = !list_empty(pt);
717 list_for_each_entry_safe(q, t, pt, list) {
718 wake_up_process(q->sleeper);
719 /* q can disappear immediately after writing q->status. */
720 smp_wmb();
721 q->status = q->pid;
723 if (did_something)
724 preempt_enable();
727 static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
729 list_del(&q->list);
730 if (q->nsops > 1)
731 sma->complex_count--;
734 /** check_restart(sma, q)
735 * @sma: semaphore array
736 * @q: the operation that just completed
738 * update_queue is O(N^2) when it restarts scanning the whole queue of
739 * waiting operations. Therefore this function checks if the restart is
740 * really necessary. It is called after a previously waiting operation
741 * modified the array.
742 * Note that wait-for-zero operations are handled without restart.
744 static int check_restart(struct sem_array *sma, struct sem_queue *q)
746 /* pending complex alter operations are too difficult to analyse */
747 if (!list_empty(&sma->pending_alter))
748 return 1;
750 /* we were a sleeping complex operation. Too difficult */
751 if (q->nsops > 1)
752 return 1;
754 /* It is impossible that someone waits for the new value:
755 * - complex operations always restart.
756 * - wait-for-zero are handled seperately.
757 * - q is a previously sleeping simple operation that
758 * altered the array. It must be a decrement, because
759 * simple increments never sleep.
760 * - If there are older (higher priority) decrements
761 * in the queue, then they have observed the original
762 * semval value and couldn't proceed. The operation
763 * decremented to value - thus they won't proceed either.
765 return 0;
769 * wake_const_ops - wake up non-alter tasks
770 * @sma: semaphore array.
771 * @semnum: semaphore that was modified.
772 * @pt: list head for the tasks that must be woken up.
774 * wake_const_ops must be called after a semaphore in a semaphore array
775 * was set to 0. If complex const operations are pending, wake_const_ops must
776 * be called with semnum = -1, as well as with the number of each modified
777 * semaphore.
778 * The tasks that must be woken up are added to @pt. The return code
779 * is stored in q->pid.
780 * The function returns 1 if at least one operation was completed successfully.
782 static int wake_const_ops(struct sem_array *sma, int semnum,
783 struct list_head *pt)
785 struct sem_queue *q;
786 struct list_head *walk;
787 struct list_head *pending_list;
788 int semop_completed = 0;
790 if (semnum == -1)
791 pending_list = &sma->pending_const;
792 else
793 pending_list = &sma->sem_base[semnum].pending_const;
795 walk = pending_list->next;
796 while (walk != pending_list) {
797 int error;
799 q = container_of(walk, struct sem_queue, list);
800 walk = walk->next;
802 error = perform_atomic_semop(sma, q);
804 if (error <= 0) {
805 /* operation completed, remove from queue & wakeup */
807 unlink_queue(sma, q);
809 wake_up_sem_queue_prepare(pt, q, error);
810 if (error == 0)
811 semop_completed = 1;
814 return semop_completed;
818 * do_smart_wakeup_zero - wakeup all wait for zero tasks
819 * @sma: semaphore array
820 * @sops: operations that were performed
821 * @nsops: number of operations
822 * @pt: list head of the tasks that must be woken up.
824 * Checks all required queue for wait-for-zero operations, based
825 * on the actual changes that were performed on the semaphore array.
826 * The function returns 1 if at least one operation was completed successfully.
828 static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,
829 int nsops, struct list_head *pt)
831 int i;
832 int semop_completed = 0;
833 int got_zero = 0;
835 /* first: the per-semaphore queues, if known */
836 if (sops) {
837 for (i = 0; i < nsops; i++) {
838 int num = sops[i].sem_num;
840 if (sma->sem_base[num].semval == 0) {
841 got_zero = 1;
842 semop_completed |= wake_const_ops(sma, num, pt);
845 } else {
847 * No sops means modified semaphores not known.
848 * Assume all were changed.
850 for (i = 0; i < sma->sem_nsems; i++) {
851 if (sma->sem_base[i].semval == 0) {
852 got_zero = 1;
853 semop_completed |= wake_const_ops(sma, i, pt);
858 * If one of the modified semaphores got 0,
859 * then check the global queue, too.
861 if (got_zero)
862 semop_completed |= wake_const_ops(sma, -1, pt);
864 return semop_completed;
869 * update_queue - look for tasks that can be completed.
870 * @sma: semaphore array.
871 * @semnum: semaphore that was modified.
872 * @pt: list head for the tasks that must be woken up.
874 * update_queue must be called after a semaphore in a semaphore array
875 * was modified. If multiple semaphores were modified, update_queue must
876 * be called with semnum = -1, as well as with the number of each modified
877 * semaphore.
878 * The tasks that must be woken up are added to @pt. The return code
879 * is stored in q->pid.
880 * The function internally checks if const operations can now succeed.
882 * The function return 1 if at least one semop was completed successfully.
884 static int update_queue(struct sem_array *sma, int semnum, struct list_head *pt)
886 struct sem_queue *q;
887 struct list_head *walk;
888 struct list_head *pending_list;
889 int semop_completed = 0;
891 if (semnum == -1)
892 pending_list = &sma->pending_alter;
893 else
894 pending_list = &sma->sem_base[semnum].pending_alter;
896 again:
897 walk = pending_list->next;
898 while (walk != pending_list) {
899 int error, restart;
901 q = container_of(walk, struct sem_queue, list);
902 walk = walk->next;
904 /* If we are scanning the single sop, per-semaphore list of
905 * one semaphore and that semaphore is 0, then it is not
906 * necessary to scan further: simple increments
907 * that affect only one entry succeed immediately and cannot
908 * be in the per semaphore pending queue, and decrements
909 * cannot be successful if the value is already 0.
911 if (semnum != -1 && sma->sem_base[semnum].semval == 0)
912 break;
914 error = perform_atomic_semop(sma, q);
916 /* Does q->sleeper still need to sleep? */
917 if (error > 0)
918 continue;
920 unlink_queue(sma, q);
922 if (error) {
923 restart = 0;
924 } else {
925 semop_completed = 1;
926 do_smart_wakeup_zero(sma, q->sops, q->nsops, pt);
927 restart = check_restart(sma, q);
930 wake_up_sem_queue_prepare(pt, q, error);
931 if (restart)
932 goto again;
934 return semop_completed;
938 * set_semotime - set sem_otime
939 * @sma: semaphore array
940 * @sops: operations that modified the array, may be NULL
942 * sem_otime is replicated to avoid cache line trashing.
943 * This function sets one instance to the current time.
945 static void set_semotime(struct sem_array *sma, struct sembuf *sops)
947 if (sops == NULL) {
948 sma->sem_base[0].sem_otime = get_seconds();
949 } else {
950 sma->sem_base[sops[0].sem_num].sem_otime =
951 get_seconds();
956 * do_smart_update - optimized update_queue
957 * @sma: semaphore array
958 * @sops: operations that were performed
959 * @nsops: number of operations
960 * @otime: force setting otime
961 * @pt: list head of the tasks that must be woken up.
963 * do_smart_update() does the required calls to update_queue and wakeup_zero,
964 * based on the actual changes that were performed on the semaphore array.
965 * Note that the function does not do the actual wake-up: the caller is
966 * responsible for calling wake_up_sem_queue_do(@pt).
967 * It is safe to perform this call after dropping all locks.
969 static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops,
970 int otime, struct list_head *pt)
972 int i;
974 otime |= do_smart_wakeup_zero(sma, sops, nsops, pt);
976 if (!list_empty(&sma->pending_alter)) {
977 /* semaphore array uses the global queue - just process it. */
978 otime |= update_queue(sma, -1, pt);
979 } else {
980 if (!sops) {
982 * No sops, thus the modified semaphores are not
983 * known. Check all.
985 for (i = 0; i < sma->sem_nsems; i++)
986 otime |= update_queue(sma, i, pt);
987 } else {
989 * Check the semaphores that were increased:
990 * - No complex ops, thus all sleeping ops are
991 * decrease.
992 * - if we decreased the value, then any sleeping
993 * semaphore ops wont be able to run: If the
994 * previous value was too small, then the new
995 * value will be too small, too.
997 for (i = 0; i < nsops; i++) {
998 if (sops[i].sem_op > 0) {
999 otime |= update_queue(sma,
1000 sops[i].sem_num, pt);
1005 if (otime)
1006 set_semotime(sma, sops);
1010 * check_qop: Test if a queued operation sleeps on the semaphore semnum
1012 static int check_qop(struct sem_array *sma, int semnum, struct sem_queue *q,
1013 bool count_zero)
1015 struct sembuf *sop = q->blocking;
1018 * Linux always (since 0.99.10) reported a task as sleeping on all
1019 * semaphores. This violates SUS, therefore it was changed to the
1020 * standard compliant behavior.
1021 * Give the administrators a chance to notice that an application
1022 * might misbehave because it relies on the Linux behavior.
1024 pr_info_once("semctl(GETNCNT/GETZCNT) is since 3.16 Single Unix Specification compliant.\n"
1025 "The task %s (%d) triggered the difference, watch for misbehavior.\n",
1026 current->comm, task_pid_nr(current));
1028 if (sop->sem_num != semnum)
1029 return 0;
1031 if (count_zero && sop->sem_op == 0)
1032 return 1;
1033 if (!count_zero && sop->sem_op < 0)
1034 return 1;
1036 return 0;
1039 /* The following counts are associated to each semaphore:
1040 * semncnt number of tasks waiting on semval being nonzero
1041 * semzcnt number of tasks waiting on semval being zero
1043 * Per definition, a task waits only on the semaphore of the first semop
1044 * that cannot proceed, even if additional operation would block, too.
1046 static int count_semcnt(struct sem_array *sma, ushort semnum,
1047 bool count_zero)
1049 struct list_head *l;
1050 struct sem_queue *q;
1051 int semcnt;
1053 semcnt = 0;
1054 /* First: check the simple operations. They are easy to evaluate */
1055 if (count_zero)
1056 l = &sma->sem_base[semnum].pending_const;
1057 else
1058 l = &sma->sem_base[semnum].pending_alter;
1060 list_for_each_entry(q, l, list) {
1061 /* all task on a per-semaphore list sleep on exactly
1062 * that semaphore
1064 semcnt++;
1067 /* Then: check the complex operations. */
1068 list_for_each_entry(q, &sma->pending_alter, list) {
1069 semcnt += check_qop(sma, semnum, q, count_zero);
1071 if (count_zero) {
1072 list_for_each_entry(q, &sma->pending_const, list) {
1073 semcnt += check_qop(sma, semnum, q, count_zero);
1076 return semcnt;
1079 /* Free a semaphore set. freeary() is called with sem_ids.rwsem locked
1080 * as a writer and the spinlock for this semaphore set hold. sem_ids.rwsem
1081 * remains locked on exit.
1083 static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
1085 struct sem_undo *un, *tu;
1086 struct sem_queue *q, *tq;
1087 struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
1088 struct list_head tasks;
1089 int i;
1091 /* Free the existing undo structures for this semaphore set. */
1092 ipc_assert_locked_object(&sma->sem_perm);
1093 list_for_each_entry_safe(un, tu, &sma->list_id, list_id) {
1094 list_del(&un->list_id);
1095 spin_lock(&un->ulp->lock);
1096 un->semid = -1;
1097 list_del_rcu(&un->list_proc);
1098 spin_unlock(&un->ulp->lock);
1099 kfree_rcu(un, rcu);
1102 /* Wake up all pending processes and let them fail with EIDRM. */
1103 INIT_LIST_HEAD(&tasks);
1104 list_for_each_entry_safe(q, tq, &sma->pending_const, list) {
1105 unlink_queue(sma, q);
1106 wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
1109 list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
1110 unlink_queue(sma, q);
1111 wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
1113 for (i = 0; i < sma->sem_nsems; i++) {
1114 struct sem *sem = sma->sem_base + i;
1115 list_for_each_entry_safe(q, tq, &sem->pending_const, list) {
1116 unlink_queue(sma, q);
1117 wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
1119 list_for_each_entry_safe(q, tq, &sem->pending_alter, list) {
1120 unlink_queue(sma, q);
1121 wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
1125 /* Remove the semaphore set from the IDR */
1126 sem_rmid(ns, sma);
1127 sem_unlock(sma, -1);
1128 rcu_read_unlock();
1130 wake_up_sem_queue_do(&tasks);
1131 ns->used_sems -= sma->sem_nsems;
1132 ipc_rcu_putref(sma, sem_rcu_free);
1135 static unsigned long copy_semid_to_user(void __user *buf, struct semid64_ds *in, int version)
1137 switch (version) {
1138 case IPC_64:
1139 return copy_to_user(buf, in, sizeof(*in));
1140 case IPC_OLD:
1142 struct semid_ds out;
1144 memset(&out, 0, sizeof(out));
1146 ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);
1148 out.sem_otime = in->sem_otime;
1149 out.sem_ctime = in->sem_ctime;
1150 out.sem_nsems = in->sem_nsems;
1152 return copy_to_user(buf, &out, sizeof(out));
1154 default:
1155 return -EINVAL;
1159 static time_t get_semotime(struct sem_array *sma)
1161 int i;
1162 time_t res;
1164 res = sma->sem_base[0].sem_otime;
1165 for (i = 1; i < sma->sem_nsems; i++) {
1166 time_t to = sma->sem_base[i].sem_otime;
1168 if (to > res)
1169 res = to;
1171 return res;
1174 static int semctl_nolock(struct ipc_namespace *ns, int semid,
1175 int cmd, int version, void __user *p)
1177 int err;
1178 struct sem_array *sma;
1180 switch (cmd) {
1181 case IPC_INFO:
1182 case SEM_INFO:
1184 struct seminfo seminfo;
1185 int max_id;
1187 err = security_sem_semctl(NULL, cmd);
1188 if (err)
1189 return err;
1191 memset(&seminfo, 0, sizeof(seminfo));
1192 seminfo.semmni = ns->sc_semmni;
1193 seminfo.semmns = ns->sc_semmns;
1194 seminfo.semmsl = ns->sc_semmsl;
1195 seminfo.semopm = ns->sc_semopm;
1196 seminfo.semvmx = SEMVMX;
1197 seminfo.semmnu = SEMMNU;
1198 seminfo.semmap = SEMMAP;
1199 seminfo.semume = SEMUME;
1200 down_read(&sem_ids(ns).rwsem);
1201 if (cmd == SEM_INFO) {
1202 seminfo.semusz = sem_ids(ns).in_use;
1203 seminfo.semaem = ns->used_sems;
1204 } else {
1205 seminfo.semusz = SEMUSZ;
1206 seminfo.semaem = SEMAEM;
1208 max_id = ipc_get_maxid(&sem_ids(ns));
1209 up_read(&sem_ids(ns).rwsem);
1210 if (copy_to_user(p, &seminfo, sizeof(struct seminfo)))
1211 return -EFAULT;
1212 return (max_id < 0) ? 0 : max_id;
1214 case IPC_STAT:
1215 case SEM_STAT:
1217 struct semid64_ds tbuf;
1218 int id = 0;
1220 memset(&tbuf, 0, sizeof(tbuf));
1222 rcu_read_lock();
1223 if (cmd == SEM_STAT) {
1224 sma = sem_obtain_object(ns, semid);
1225 if (IS_ERR(sma)) {
1226 err = PTR_ERR(sma);
1227 goto out_unlock;
1229 id = sma->sem_perm.id;
1230 } else {
1231 sma = sem_obtain_object_check(ns, semid);
1232 if (IS_ERR(sma)) {
1233 err = PTR_ERR(sma);
1234 goto out_unlock;
1238 err = -EACCES;
1239 if (ipcperms(ns, &sma->sem_perm, S_IRUGO))
1240 goto out_unlock;
1242 err = security_sem_semctl(sma, cmd);
1243 if (err)
1244 goto out_unlock;
1246 kernel_to_ipc64_perm(&sma->sem_perm, &tbuf.sem_perm);
1247 tbuf.sem_otime = get_semotime(sma);
1248 tbuf.sem_ctime = sma->sem_ctime;
1249 tbuf.sem_nsems = sma->sem_nsems;
1250 rcu_read_unlock();
1251 if (copy_semid_to_user(p, &tbuf, version))
1252 return -EFAULT;
1253 return id;
1255 default:
1256 return -EINVAL;
1258 out_unlock:
1259 rcu_read_unlock();
1260 return err;
1263 static int semctl_setval(struct ipc_namespace *ns, int semid, int semnum,
1264 unsigned long arg)
1266 struct sem_undo *un;
1267 struct sem_array *sma;
1268 struct sem *curr;
1269 int err;
1270 struct list_head tasks;
1271 int val;
1272 #if defined(CONFIG_64BIT) && defined(__BIG_ENDIAN)
1273 /* big-endian 64bit */
1274 val = arg >> 32;
1275 #else
1276 /* 32bit or little-endian 64bit */
1277 val = arg;
1278 #endif
1280 if (val > SEMVMX || val < 0)
1281 return -ERANGE;
1283 INIT_LIST_HEAD(&tasks);
1285 rcu_read_lock();
1286 sma = sem_obtain_object_check(ns, semid);
1287 if (IS_ERR(sma)) {
1288 rcu_read_unlock();
1289 return PTR_ERR(sma);
1292 if (semnum < 0 || semnum >= sma->sem_nsems) {
1293 rcu_read_unlock();
1294 return -EINVAL;
1298 if (ipcperms(ns, &sma->sem_perm, S_IWUGO)) {
1299 rcu_read_unlock();
1300 return -EACCES;
1303 err = security_sem_semctl(sma, SETVAL);
1304 if (err) {
1305 rcu_read_unlock();
1306 return -EACCES;
1309 sem_lock(sma, NULL, -1);
1311 if (!ipc_valid_object(&sma->sem_perm)) {
1312 sem_unlock(sma, -1);
1313 rcu_read_unlock();
1314 return -EIDRM;
1317 curr = &sma->sem_base[semnum];
1319 ipc_assert_locked_object(&sma->sem_perm);
1320 list_for_each_entry(un, &sma->list_id, list_id)
1321 un->semadj[semnum] = 0;
1323 curr->semval = val;
1324 curr->sempid = task_tgid_vnr(current);
1325 sma->sem_ctime = get_seconds();
1326 /* maybe some queued-up processes were waiting for this */
1327 do_smart_update(sma, NULL, 0, 0, &tasks);
1328 sem_unlock(sma, -1);
1329 rcu_read_unlock();
1330 wake_up_sem_queue_do(&tasks);
1331 return 0;
1334 static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
1335 int cmd, void __user *p)
1337 struct sem_array *sma;
1338 struct sem *curr;
1339 int err, nsems;
1340 ushort fast_sem_io[SEMMSL_FAST];
1341 ushort *sem_io = fast_sem_io;
1342 struct list_head tasks;
1344 INIT_LIST_HEAD(&tasks);
1346 rcu_read_lock();
1347 sma = sem_obtain_object_check(ns, semid);
1348 if (IS_ERR(sma)) {
1349 rcu_read_unlock();
1350 return PTR_ERR(sma);
1353 nsems = sma->sem_nsems;
1355 err = -EACCES;
1356 if (ipcperms(ns, &sma->sem_perm, cmd == SETALL ? S_IWUGO : S_IRUGO))
1357 goto out_rcu_wakeup;
1359 err = security_sem_semctl(sma, cmd);
1360 if (err)
1361 goto out_rcu_wakeup;
1363 err = -EACCES;
1364 switch (cmd) {
1365 case GETALL:
1367 ushort __user *array = p;
1368 int i;
1370 sem_lock(sma, NULL, -1);
1371 if (!ipc_valid_object(&sma->sem_perm)) {
1372 err = -EIDRM;
1373 goto out_unlock;
1375 if (nsems > SEMMSL_FAST) {
1376 if (!ipc_rcu_getref(sma)) {
1377 err = -EIDRM;
1378 goto out_unlock;
1380 sem_unlock(sma, -1);
1381 rcu_read_unlock();
1382 sem_io = ipc_alloc(sizeof(ushort)*nsems);
1383 if (sem_io == NULL) {
1384 ipc_rcu_putref(sma, sem_rcu_free);
1385 return -ENOMEM;
1388 rcu_read_lock();
1389 sem_lock_and_putref(sma);
1390 if (!ipc_valid_object(&sma->sem_perm)) {
1391 err = -EIDRM;
1392 goto out_unlock;
1395 for (i = 0; i < sma->sem_nsems; i++)
1396 sem_io[i] = sma->sem_base[i].semval;
1397 sem_unlock(sma, -1);
1398 rcu_read_unlock();
1399 err = 0;
1400 if (copy_to_user(array, sem_io, nsems*sizeof(ushort)))
1401 err = -EFAULT;
1402 goto out_free;
1404 case SETALL:
1406 int i;
1407 struct sem_undo *un;
1409 if (!ipc_rcu_getref(sma)) {
1410 err = -EIDRM;
1411 goto out_rcu_wakeup;
1413 rcu_read_unlock();
1415 if (nsems > SEMMSL_FAST) {
1416 sem_io = ipc_alloc(sizeof(ushort)*nsems);
1417 if (sem_io == NULL) {
1418 ipc_rcu_putref(sma, sem_rcu_free);
1419 return -ENOMEM;
1423 if (copy_from_user(sem_io, p, nsems*sizeof(ushort))) {
1424 ipc_rcu_putref(sma, sem_rcu_free);
1425 err = -EFAULT;
1426 goto out_free;
1429 for (i = 0; i < nsems; i++) {
1430 if (sem_io[i] > SEMVMX) {
1431 ipc_rcu_putref(sma, sem_rcu_free);
1432 err = -ERANGE;
1433 goto out_free;
1436 rcu_read_lock();
1437 sem_lock_and_putref(sma);
1438 if (!ipc_valid_object(&sma->sem_perm)) {
1439 err = -EIDRM;
1440 goto out_unlock;
1443 for (i = 0; i < nsems; i++) {
1444 sma->sem_base[i].semval = sem_io[i];
1445 sma->sem_base[i].sempid = task_tgid_vnr(current);
1448 ipc_assert_locked_object(&sma->sem_perm);
1449 list_for_each_entry(un, &sma->list_id, list_id) {
1450 for (i = 0; i < nsems; i++)
1451 un->semadj[i] = 0;
1453 sma->sem_ctime = get_seconds();
1454 /* maybe some queued-up processes were waiting for this */
1455 do_smart_update(sma, NULL, 0, 0, &tasks);
1456 err = 0;
1457 goto out_unlock;
1459 /* GETVAL, GETPID, GETNCTN, GETZCNT: fall-through */
1461 err = -EINVAL;
1462 if (semnum < 0 || semnum >= nsems)
1463 goto out_rcu_wakeup;
1465 sem_lock(sma, NULL, -1);
1466 if (!ipc_valid_object(&sma->sem_perm)) {
1467 err = -EIDRM;
1468 goto out_unlock;
1470 curr = &sma->sem_base[semnum];
1472 switch (cmd) {
1473 case GETVAL:
1474 err = curr->semval;
1475 goto out_unlock;
1476 case GETPID:
1477 err = curr->sempid;
1478 goto out_unlock;
1479 case GETNCNT:
1480 err = count_semcnt(sma, semnum, 0);
1481 goto out_unlock;
1482 case GETZCNT:
1483 err = count_semcnt(sma, semnum, 1);
1484 goto out_unlock;
1487 out_unlock:
1488 sem_unlock(sma, -1);
1489 out_rcu_wakeup:
1490 rcu_read_unlock();
1491 wake_up_sem_queue_do(&tasks);
1492 out_free:
1493 if (sem_io != fast_sem_io)
1494 ipc_free(sem_io);
1495 return err;
1498 static inline unsigned long
1499 copy_semid_from_user(struct semid64_ds *out, void __user *buf, int version)
1501 switch (version) {
1502 case IPC_64:
1503 if (copy_from_user(out, buf, sizeof(*out)))
1504 return -EFAULT;
1505 return 0;
1506 case IPC_OLD:
1508 struct semid_ds tbuf_old;
1510 if (copy_from_user(&tbuf_old, buf, sizeof(tbuf_old)))
1511 return -EFAULT;
1513 out->sem_perm.uid = tbuf_old.sem_perm.uid;
1514 out->sem_perm.gid = tbuf_old.sem_perm.gid;
1515 out->sem_perm.mode = tbuf_old.sem_perm.mode;
1517 return 0;
1519 default:
1520 return -EINVAL;
1525 * This function handles some semctl commands which require the rwsem
1526 * to be held in write mode.
1527 * NOTE: no locks must be held, the rwsem is taken inside this function.
1529 static int semctl_down(struct ipc_namespace *ns, int semid,
1530 int cmd, int version, void __user *p)
1532 struct sem_array *sma;
1533 int err;
1534 struct semid64_ds semid64;
1535 struct kern_ipc_perm *ipcp;
1537 if (cmd == IPC_SET) {
1538 if (copy_semid_from_user(&semid64, p, version))
1539 return -EFAULT;
1542 down_write(&sem_ids(ns).rwsem);
1543 rcu_read_lock();
1545 ipcp = ipcctl_pre_down_nolock(ns, &sem_ids(ns), semid, cmd,
1546 &semid64.sem_perm, 0);
1547 if (IS_ERR(ipcp)) {
1548 err = PTR_ERR(ipcp);
1549 goto out_unlock1;
1552 sma = container_of(ipcp, struct sem_array, sem_perm);
1554 err = security_sem_semctl(sma, cmd);
1555 if (err)
1556 goto out_unlock1;
1558 switch (cmd) {
1559 case IPC_RMID:
1560 sem_lock(sma, NULL, -1);
1561 /* freeary unlocks the ipc object and rcu */
1562 freeary(ns, ipcp);
1563 goto out_up;
1564 case IPC_SET:
1565 sem_lock(sma, NULL, -1);
1566 err = ipc_update_perm(&semid64.sem_perm, ipcp);
1567 if (err)
1568 goto out_unlock0;
1569 sma->sem_ctime = get_seconds();
1570 break;
1571 default:
1572 err = -EINVAL;
1573 goto out_unlock1;
1576 out_unlock0:
1577 sem_unlock(sma, -1);
1578 out_unlock1:
1579 rcu_read_unlock();
1580 out_up:
1581 up_write(&sem_ids(ns).rwsem);
1582 return err;
1585 SYSCALL_DEFINE4(semctl, int, semid, int, semnum, int, cmd, unsigned long, arg)
1587 int version;
1588 struct ipc_namespace *ns;
1589 void __user *p = (void __user *)arg;
1591 if (semid < 0)
1592 return -EINVAL;
1594 version = ipc_parse_version(&cmd);
1595 ns = current->nsproxy->ipc_ns;
1597 switch (cmd) {
1598 case IPC_INFO:
1599 case SEM_INFO:
1600 case IPC_STAT:
1601 case SEM_STAT:
1602 return semctl_nolock(ns, semid, cmd, version, p);
1603 case GETALL:
1604 case GETVAL:
1605 case GETPID:
1606 case GETNCNT:
1607 case GETZCNT:
1608 case SETALL:
1609 return semctl_main(ns, semid, semnum, cmd, p);
1610 case SETVAL:
1611 return semctl_setval(ns, semid, semnum, arg);
1612 case IPC_RMID:
1613 case IPC_SET:
1614 return semctl_down(ns, semid, cmd, version, p);
1615 default:
1616 return -EINVAL;
1620 /* If the task doesn't already have a undo_list, then allocate one
1621 * here. We guarantee there is only one thread using this undo list,
1622 * and current is THE ONE
1624 * If this allocation and assignment succeeds, but later
1625 * portions of this code fail, there is no need to free the sem_undo_list.
1626 * Just let it stay associated with the task, and it'll be freed later
1627 * at exit time.
1629 * This can block, so callers must hold no locks.
1631 static inline int get_undo_list(struct sem_undo_list **undo_listp)
1633 struct sem_undo_list *undo_list;
1635 undo_list = current->sysvsem.undo_list;
1636 if (!undo_list) {
1637 undo_list = kzalloc(sizeof(*undo_list), GFP_KERNEL);
1638 if (undo_list == NULL)
1639 return -ENOMEM;
1640 spin_lock_init(&undo_list->lock);
1641 atomic_set(&undo_list->refcnt, 1);
1642 INIT_LIST_HEAD(&undo_list->list_proc);
1644 current->sysvsem.undo_list = undo_list;
1646 *undo_listp = undo_list;
1647 return 0;
1650 static struct sem_undo *__lookup_undo(struct sem_undo_list *ulp, int semid)
1652 struct sem_undo *un;
1654 list_for_each_entry_rcu(un, &ulp->list_proc, list_proc) {
1655 if (un->semid == semid)
1656 return un;
1658 return NULL;
1661 static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid)
1663 struct sem_undo *un;
1665 assert_spin_locked(&ulp->lock);
1667 un = __lookup_undo(ulp, semid);
1668 if (un) {
1669 list_del_rcu(&un->list_proc);
1670 list_add_rcu(&un->list_proc, &ulp->list_proc);
1672 return un;
1676 * find_alloc_undo - lookup (and if not present create) undo array
1677 * @ns: namespace
1678 * @semid: semaphore array id
1680 * The function looks up (and if not present creates) the undo structure.
1681 * The size of the undo structure depends on the size of the semaphore
1682 * array, thus the alloc path is not that straightforward.
1683 * Lifetime-rules: sem_undo is rcu-protected, on success, the function
1684 * performs a rcu_read_lock().
1686 static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
1688 struct sem_array *sma;
1689 struct sem_undo_list *ulp;
1690 struct sem_undo *un, *new;
1691 int nsems, error;
1693 error = get_undo_list(&ulp);
1694 if (error)
1695 return ERR_PTR(error);
1697 rcu_read_lock();
1698 spin_lock(&ulp->lock);
1699 un = lookup_undo(ulp, semid);
1700 spin_unlock(&ulp->lock);
1701 if (likely(un != NULL))
1702 goto out;
1704 /* no undo structure around - allocate one. */
1705 /* step 1: figure out the size of the semaphore array */
1706 sma = sem_obtain_object_check(ns, semid);
1707 if (IS_ERR(sma)) {
1708 rcu_read_unlock();
1709 return ERR_CAST(sma);
1712 nsems = sma->sem_nsems;
1713 if (!ipc_rcu_getref(sma)) {
1714 rcu_read_unlock();
1715 un = ERR_PTR(-EIDRM);
1716 goto out;
1718 rcu_read_unlock();
1720 /* step 2: allocate new undo structure */
1721 new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL);
1722 if (!new) {
1723 ipc_rcu_putref(sma, sem_rcu_free);
1724 return ERR_PTR(-ENOMEM);
1727 /* step 3: Acquire the lock on semaphore array */
1728 rcu_read_lock();
1729 sem_lock_and_putref(sma);
1730 if (!ipc_valid_object(&sma->sem_perm)) {
1731 sem_unlock(sma, -1);
1732 rcu_read_unlock();
1733 kfree(new);
1734 un = ERR_PTR(-EIDRM);
1735 goto out;
1737 spin_lock(&ulp->lock);
1740 * step 4: check for races: did someone else allocate the undo struct?
1742 un = lookup_undo(ulp, semid);
1743 if (un) {
1744 kfree(new);
1745 goto success;
1747 /* step 5: initialize & link new undo structure */
1748 new->semadj = (short *) &new[1];
1749 new->ulp = ulp;
1750 new->semid = semid;
1751 assert_spin_locked(&ulp->lock);
1752 list_add_rcu(&new->list_proc, &ulp->list_proc);
1753 ipc_assert_locked_object(&sma->sem_perm);
1754 list_add(&new->list_id, &sma->list_id);
1755 un = new;
1757 success:
1758 spin_unlock(&ulp->lock);
1759 sem_unlock(sma, -1);
1760 out:
1761 return un;
1766 * get_queue_result - retrieve the result code from sem_queue
1767 * @q: Pointer to queue structure
1769 * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
1770 * q->status, then we must loop until the value is replaced with the final
1771 * value: This may happen if a task is woken up by an unrelated event (e.g.
1772 * signal) and in parallel the task is woken up by another task because it got
1773 * the requested semaphores.
1775 * The function can be called with or without holding the semaphore spinlock.
1777 static int get_queue_result(struct sem_queue *q)
1779 int error;
1781 error = q->status;
1782 while (unlikely(error == IN_WAKEUP)) {
1783 cpu_relax();
1784 error = q->status;
1787 return error;
1790 SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
1791 unsigned, nsops, const struct timespec __user *, timeout)
1793 int error = -EINVAL;
1794 struct sem_array *sma;
1795 struct sembuf fast_sops[SEMOPM_FAST];
1796 struct sembuf *sops = fast_sops, *sop;
1797 struct sem_undo *un;
1798 int undos = 0, alter = 0, max, locknum;
1799 struct sem_queue queue;
1800 unsigned long jiffies_left = 0;
1801 struct ipc_namespace *ns;
1802 struct list_head tasks;
1804 ns = current->nsproxy->ipc_ns;
1806 if (nsops < 1 || semid < 0)
1807 return -EINVAL;
1808 if (nsops > ns->sc_semopm)
1809 return -E2BIG;
1810 if (nsops > SEMOPM_FAST) {
1811 sops = kmalloc(sizeof(*sops)*nsops, GFP_KERNEL);
1812 if (sops == NULL)
1813 return -ENOMEM;
1815 if (copy_from_user(sops, tsops, nsops * sizeof(*tsops))) {
1816 error = -EFAULT;
1817 goto out_free;
1819 if (timeout) {
1820 struct timespec _timeout;
1821 if (copy_from_user(&_timeout, timeout, sizeof(*timeout))) {
1822 error = -EFAULT;
1823 goto out_free;
1825 if (_timeout.tv_sec < 0 || _timeout.tv_nsec < 0 ||
1826 _timeout.tv_nsec >= 1000000000L) {
1827 error = -EINVAL;
1828 goto out_free;
1830 jiffies_left = timespec_to_jiffies(&_timeout);
1832 max = 0;
1833 for (sop = sops; sop < sops + nsops; sop++) {
1834 if (sop->sem_num >= max)
1835 max = sop->sem_num;
1836 if (sop->sem_flg & SEM_UNDO)
1837 undos = 1;
1838 if (sop->sem_op != 0)
1839 alter = 1;
1842 INIT_LIST_HEAD(&tasks);
1844 if (undos) {
1845 /* On success, find_alloc_undo takes the rcu_read_lock */
1846 un = find_alloc_undo(ns, semid);
1847 if (IS_ERR(un)) {
1848 error = PTR_ERR(un);
1849 goto out_free;
1851 } else {
1852 un = NULL;
1853 rcu_read_lock();
1856 sma = sem_obtain_object_check(ns, semid);
1857 if (IS_ERR(sma)) {
1858 rcu_read_unlock();
1859 error = PTR_ERR(sma);
1860 goto out_free;
1863 error = -EFBIG;
1864 if (max >= sma->sem_nsems)
1865 goto out_rcu_wakeup;
1867 error = -EACCES;
1868 if (ipcperms(ns, &sma->sem_perm, alter ? S_IWUGO : S_IRUGO))
1869 goto out_rcu_wakeup;
1871 error = security_sem_semop(sma, sops, nsops, alter);
1872 if (error)
1873 goto out_rcu_wakeup;
1875 error = -EIDRM;
1876 locknum = sem_lock(sma, sops, nsops);
1878 * We eventually might perform the following check in a lockless
1879 * fashion, considering ipc_valid_object() locking constraints.
1880 * If nsops == 1 and there is no contention for sem_perm.lock, then
1881 * only a per-semaphore lock is held and it's OK to proceed with the
1882 * check below. More details on the fine grained locking scheme
1883 * entangled here and why it's RMID race safe on comments at sem_lock()
1885 if (!ipc_valid_object(&sma->sem_perm))
1886 goto out_unlock_free;
1888 * semid identifiers are not unique - find_alloc_undo may have
1889 * allocated an undo structure, it was invalidated by an RMID
1890 * and now a new array with received the same id. Check and fail.
1891 * This case can be detected checking un->semid. The existence of
1892 * "un" itself is guaranteed by rcu.
1894 if (un && un->semid == -1)
1895 goto out_unlock_free;
1897 queue.sops = sops;
1898 queue.nsops = nsops;
1899 queue.undo = un;
1900 queue.pid = task_tgid_vnr(current);
1901 queue.alter = alter;
1903 error = perform_atomic_semop(sma, &queue);
1904 if (error == 0) {
1905 /* If the operation was successful, then do
1906 * the required updates.
1908 if (alter)
1909 do_smart_update(sma, sops, nsops, 1, &tasks);
1910 else
1911 set_semotime(sma, sops);
1913 if (error <= 0)
1914 goto out_unlock_free;
1916 /* We need to sleep on this operation, so we put the current
1917 * task into the pending queue and go to sleep.
1920 if (nsops == 1) {
1921 struct sem *curr;
1922 curr = &sma->sem_base[sops->sem_num];
1924 if (alter) {
1925 if (sma->complex_count) {
1926 list_add_tail(&queue.list,
1927 &sma->pending_alter);
1928 } else {
1930 list_add_tail(&queue.list,
1931 &curr->pending_alter);
1933 } else {
1934 list_add_tail(&queue.list, &curr->pending_const);
1936 } else {
1937 if (!sma->complex_count)
1938 merge_queues(sma);
1940 if (alter)
1941 list_add_tail(&queue.list, &sma->pending_alter);
1942 else
1943 list_add_tail(&queue.list, &sma->pending_const);
1945 sma->complex_count++;
1948 queue.status = -EINTR;
1949 queue.sleeper = current;
1951 sleep_again:
1952 __set_current_state(TASK_INTERRUPTIBLE);
1953 sem_unlock(sma, locknum);
1954 rcu_read_unlock();
1956 if (timeout)
1957 jiffies_left = schedule_timeout(jiffies_left);
1958 else
1959 schedule();
1961 error = get_queue_result(&queue);
1963 if (error != -EINTR) {
1964 /* fast path: update_queue already obtained all requested
1965 * resources.
1966 * Perform a smp_mb(): User space could assume that semop()
1967 * is a memory barrier: Without the mb(), the cpu could
1968 * speculatively read in user space stale data that was
1969 * overwritten by the previous owner of the semaphore.
1971 smp_mb();
1973 goto out_free;
1976 rcu_read_lock();
1977 sma = sem_obtain_lock(ns, semid, sops, nsops, &locknum);
1980 * Wait until it's guaranteed that no wakeup_sem_queue_do() is ongoing.
1982 error = get_queue_result(&queue);
1985 * Array removed? If yes, leave without sem_unlock().
1987 if (IS_ERR(sma)) {
1988 rcu_read_unlock();
1989 goto out_free;
1994 * If queue.status != -EINTR we are woken up by another process.
1995 * Leave without unlink_queue(), but with sem_unlock().
1997 if (error != -EINTR)
1998 goto out_unlock_free;
2001 * If an interrupt occurred we have to clean up the queue
2003 if (timeout && jiffies_left == 0)
2004 error = -EAGAIN;
2007 * If the wakeup was spurious, just retry
2009 if (error == -EINTR && !signal_pending(current))
2010 goto sleep_again;
2012 unlink_queue(sma, &queue);
2014 out_unlock_free:
2015 sem_unlock(sma, locknum);
2016 out_rcu_wakeup:
2017 rcu_read_unlock();
2018 wake_up_sem_queue_do(&tasks);
2019 out_free:
2020 if (sops != fast_sops)
2021 kfree(sops);
2022 return error;
2025 SYSCALL_DEFINE3(semop, int, semid, struct sembuf __user *, tsops,
2026 unsigned, nsops)
2028 return sys_semtimedop(semid, tsops, nsops, NULL);
2031 /* If CLONE_SYSVSEM is set, establish sharing of SEM_UNDO state between
2032 * parent and child tasks.
2035 int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
2037 struct sem_undo_list *undo_list;
2038 int error;
2040 if (clone_flags & CLONE_SYSVSEM) {
2041 error = get_undo_list(&undo_list);
2042 if (error)
2043 return error;
2044 atomic_inc(&undo_list->refcnt);
2045 tsk->sysvsem.undo_list = undo_list;
2046 } else
2047 tsk->sysvsem.undo_list = NULL;
2049 return 0;
2053 * add semadj values to semaphores, free undo structures.
2054 * undo structures are not freed when semaphore arrays are destroyed
2055 * so some of them may be out of date.
2056 * IMPLEMENTATION NOTE: There is some confusion over whether the
2057 * set of adjustments that needs to be done should be done in an atomic
2058 * manner or not. That is, if we are attempting to decrement the semval
2059 * should we queue up and wait until we can do so legally?
2060 * The original implementation attempted to do this (queue and wait).
2061 * The current implementation does not do so. The POSIX standard
2062 * and SVID should be consulted to determine what behavior is mandated.
2064 void exit_sem(struct task_struct *tsk)
2066 struct sem_undo_list *ulp;
2068 ulp = tsk->sysvsem.undo_list;
2069 if (!ulp)
2070 return;
2071 tsk->sysvsem.undo_list = NULL;
2073 if (!atomic_dec_and_test(&ulp->refcnt))
2074 return;
2076 for (;;) {
2077 struct sem_array *sma;
2078 struct sem_undo *un;
2079 struct list_head tasks;
2080 int semid, i;
2082 rcu_read_lock();
2083 un = list_entry_rcu(ulp->list_proc.next,
2084 struct sem_undo, list_proc);
2085 if (&un->list_proc == &ulp->list_proc) {
2087 * We must wait for freeary() before freeing this ulp,
2088 * in case we raced with last sem_undo. There is a small
2089 * possibility where we exit while freeary() didn't
2090 * finish unlocking sem_undo_list.
2092 spin_unlock_wait(&ulp->lock);
2093 rcu_read_unlock();
2094 break;
2096 spin_lock(&ulp->lock);
2097 semid = un->semid;
2098 spin_unlock(&ulp->lock);
2100 /* exit_sem raced with IPC_RMID, nothing to do */
2101 if (semid == -1) {
2102 rcu_read_unlock();
2103 continue;
2106 sma = sem_obtain_object_check(tsk->nsproxy->ipc_ns, semid);
2107 /* exit_sem raced with IPC_RMID, nothing to do */
2108 if (IS_ERR(sma)) {
2109 rcu_read_unlock();
2110 continue;
2113 sem_lock(sma, NULL, -1);
2114 /* exit_sem raced with IPC_RMID, nothing to do */
2115 if (!ipc_valid_object(&sma->sem_perm)) {
2116 sem_unlock(sma, -1);
2117 rcu_read_unlock();
2118 continue;
2120 un = __lookup_undo(ulp, semid);
2121 if (un == NULL) {
2122 /* exit_sem raced with IPC_RMID+semget() that created
2123 * exactly the same semid. Nothing to do.
2125 sem_unlock(sma, -1);
2126 rcu_read_unlock();
2127 continue;
2130 /* remove un from the linked lists */
2131 ipc_assert_locked_object(&sma->sem_perm);
2132 list_del(&un->list_id);
2134 /* we are the last process using this ulp, acquiring ulp->lock
2135 * isn't required. Besides that, we are also protected against
2136 * IPC_RMID as we hold sma->sem_perm lock now
2138 list_del_rcu(&un->list_proc);
2140 /* perform adjustments registered in un */
2141 for (i = 0; i < sma->sem_nsems; i++) {
2142 struct sem *semaphore = &sma->sem_base[i];
2143 if (un->semadj[i]) {
2144 semaphore->semval += un->semadj[i];
2146 * Range checks of the new semaphore value,
2147 * not defined by sus:
2148 * - Some unices ignore the undo entirely
2149 * (e.g. HP UX 11i 11.22, Tru64 V5.1)
2150 * - some cap the value (e.g. FreeBSD caps
2151 * at 0, but doesn't enforce SEMVMX)
2153 * Linux caps the semaphore value, both at 0
2154 * and at SEMVMX.
2156 * Manfred <manfred@colorfullife.com>
2158 if (semaphore->semval < 0)
2159 semaphore->semval = 0;
2160 if (semaphore->semval > SEMVMX)
2161 semaphore->semval = SEMVMX;
2162 semaphore->sempid = task_tgid_vnr(current);
2165 /* maybe some queued-up processes were waiting for this */
2166 INIT_LIST_HEAD(&tasks);
2167 do_smart_update(sma, NULL, 0, 1, &tasks);
2168 sem_unlock(sma, -1);
2169 rcu_read_unlock();
2170 wake_up_sem_queue_do(&tasks);
2172 kfree_rcu(un, rcu);
2174 kfree(ulp);
2177 #ifdef CONFIG_PROC_FS
2178 static int sysvipc_sem_proc_show(struct seq_file *s, void *it)
2180 struct user_namespace *user_ns = seq_user_ns(s);
2181 struct sem_array *sma = it;
2182 time_t sem_otime;
2185 * The proc interface isn't aware of sem_lock(), it calls
2186 * ipc_lock_object() directly (in sysvipc_find_ipc).
2187 * In order to stay compatible with sem_lock(), we must wait until
2188 * all simple semop() calls have left their critical regions.
2190 sem_wait_array(sma);
2192 sem_otime = get_semotime(sma);
2194 seq_printf(s,
2195 "%10d %10d %4o %10u %5u %5u %5u %5u %10lu %10lu\n",
2196 sma->sem_perm.key,
2197 sma->sem_perm.id,
2198 sma->sem_perm.mode,
2199 sma->sem_nsems,
2200 from_kuid_munged(user_ns, sma->sem_perm.uid),
2201 from_kgid_munged(user_ns, sma->sem_perm.gid),
2202 from_kuid_munged(user_ns, sma->sem_perm.cuid),
2203 from_kgid_munged(user_ns, sma->sem_perm.cgid),
2204 sem_otime,
2205 sma->sem_ctime);
2207 return 0;
2209 #endif