4 * An implementation of the DCCP protocol
5 * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
13 #include <linux/dccp.h>
14 #include <linux/skbuff.h>
15 #include <linux/slab.h>
23 /* rate-limit for syncs in reply to sequence-invalid packets; RFC 4340, 7.5.4 */
24 int sysctl_dccp_sync_ratelimit __read_mostly
= HZ
/ 8;
26 static void dccp_enqueue_skb(struct sock
*sk
, struct sk_buff
*skb
)
28 __skb_pull(skb
, dccp_hdr(skb
)->dccph_doff
* 4);
29 __skb_queue_tail(&sk
->sk_receive_queue
, skb
);
30 skb_set_owner_r(skb
, sk
);
31 sk
->sk_data_ready(sk
);
34 static void dccp_fin(struct sock
*sk
, struct sk_buff
*skb
)
37 * On receiving Close/CloseReq, both RD/WR shutdown are performed.
38 * RFC 4340, 8.3 says that we MAY send further Data/DataAcks after
39 * receiving the closing segment, but there is no guarantee that such
40 * data will be processed at all.
42 sk
->sk_shutdown
= SHUTDOWN_MASK
;
43 sock_set_flag(sk
, SOCK_DONE
);
44 dccp_enqueue_skb(sk
, skb
);
47 static int dccp_rcv_close(struct sock
*sk
, struct sk_buff
*skb
)
51 switch (sk
->sk_state
) {
53 * We ignore Close when received in one of the following states:
54 * - CLOSED (may be a late or duplicate packet)
55 * - PASSIVE_CLOSEREQ (the peer has sent a CloseReq earlier)
56 * - RESPOND (already handled by dccp_check_req)
60 * Simultaneous-close: receiving a Close after sending one. This
61 * can happen if both client and server perform active-close and
62 * will result in an endless ping-pong of crossing and retrans-
63 * mitted Close packets, which only terminates when one of the
64 * nodes times out (min. 64 seconds). Quicker convergence can be
65 * achieved when one of the nodes acts as tie-breaker.
66 * This is ok as both ends are done with data transfer and each
67 * end is just waiting for the other to acknowledge termination.
69 if (dccp_sk(sk
)->dccps_role
!= DCCP_ROLE_CLIENT
)
73 case DCCP_ACTIVE_CLOSEREQ
:
74 dccp_send_reset(sk
, DCCP_RESET_CODE_CLOSED
);
79 /* Give waiting application a chance to read pending data */
82 dccp_set_state(sk
, DCCP_PASSIVE_CLOSE
);
84 case DCCP_PASSIVE_CLOSE
:
86 * Retransmitted Close: we have already enqueued the first one.
88 sk_wake_async(sk
, SOCK_WAKE_WAITD
, POLL_HUP
);
93 static int dccp_rcv_closereq(struct sock
*sk
, struct sk_buff
*skb
)
98 * Step 7: Check for unexpected packet types
99 * If (S.is_server and P.type == CloseReq)
100 * Send Sync packet acknowledging P.seqno
101 * Drop packet and return
103 if (dccp_sk(sk
)->dccps_role
!= DCCP_ROLE_CLIENT
) {
104 dccp_send_sync(sk
, DCCP_SKB_CB(skb
)->dccpd_seq
, DCCP_PKT_SYNC
);
108 /* Step 13: process relevant Client states < CLOSEREQ */
109 switch (sk
->sk_state
) {
110 case DCCP_REQUESTING
:
111 dccp_send_close(sk
, 0);
112 dccp_set_state(sk
, DCCP_CLOSING
);
116 /* Give waiting application a chance to read pending data */
119 dccp_set_state(sk
, DCCP_PASSIVE_CLOSEREQ
);
121 case DCCP_PASSIVE_CLOSEREQ
:
122 sk_wake_async(sk
, SOCK_WAKE_WAITD
, POLL_HUP
);
127 static u16
dccp_reset_code_convert(const u8 code
)
129 const u16 error_code
[] = {
130 [DCCP_RESET_CODE_CLOSED
] = 0, /* normal termination */
131 [DCCP_RESET_CODE_UNSPECIFIED
] = 0, /* nothing known */
132 [DCCP_RESET_CODE_ABORTED
] = ECONNRESET
,
134 [DCCP_RESET_CODE_NO_CONNECTION
] = ECONNREFUSED
,
135 [DCCP_RESET_CODE_CONNECTION_REFUSED
] = ECONNREFUSED
,
136 [DCCP_RESET_CODE_TOO_BUSY
] = EUSERS
,
137 [DCCP_RESET_CODE_AGGRESSION_PENALTY
] = EDQUOT
,
139 [DCCP_RESET_CODE_PACKET_ERROR
] = ENOMSG
,
140 [DCCP_RESET_CODE_BAD_INIT_COOKIE
] = EBADR
,
141 [DCCP_RESET_CODE_BAD_SERVICE_CODE
] = EBADRQC
,
142 [DCCP_RESET_CODE_OPTION_ERROR
] = EILSEQ
,
143 [DCCP_RESET_CODE_MANDATORY_ERROR
] = EOPNOTSUPP
,
146 return code
>= DCCP_MAX_RESET_CODES
? 0 : error_code
[code
];
149 static void dccp_rcv_reset(struct sock
*sk
, struct sk_buff
*skb
)
151 u16 err
= dccp_reset_code_convert(dccp_hdr_reset(skb
)->dccph_reset_code
);
155 /* Queue the equivalent of TCP fin so that dccp_recvmsg exits the loop */
158 if (err
&& !sock_flag(sk
, SOCK_DEAD
))
159 sk_wake_async(sk
, SOCK_WAKE_IO
, POLL_ERR
);
160 dccp_time_wait(sk
, DCCP_TIME_WAIT
, 0);
163 static void dccp_handle_ackvec_processing(struct sock
*sk
, struct sk_buff
*skb
)
165 struct dccp_ackvec
*av
= dccp_sk(sk
)->dccps_hc_rx_ackvec
;
169 if (DCCP_SKB_CB(skb
)->dccpd_ack_seq
!= DCCP_PKT_WITHOUT_ACK_SEQ
)
170 dccp_ackvec_clear_state(av
, DCCP_SKB_CB(skb
)->dccpd_ack_seq
);
171 dccp_ackvec_input(av
, skb
);
174 static void dccp_deliver_input_to_ccids(struct sock
*sk
, struct sk_buff
*skb
)
176 const struct dccp_sock
*dp
= dccp_sk(sk
);
178 /* Don't deliver to RX CCID when node has shut down read end. */
179 if (!(sk
->sk_shutdown
& RCV_SHUTDOWN
))
180 ccid_hc_rx_packet_recv(dp
->dccps_hc_rx_ccid
, sk
, skb
);
182 * Until the TX queue has been drained, we can not honour SHUT_WR, since
183 * we need received feedback as input to adjust congestion control.
185 if (sk
->sk_write_queue
.qlen
> 0 || !(sk
->sk_shutdown
& SEND_SHUTDOWN
))
186 ccid_hc_tx_packet_recv(dp
->dccps_hc_tx_ccid
, sk
, skb
);
189 static int dccp_check_seqno(struct sock
*sk
, struct sk_buff
*skb
)
191 const struct dccp_hdr
*dh
= dccp_hdr(skb
);
192 struct dccp_sock
*dp
= dccp_sk(sk
);
193 u64 lswl
, lawl
, seqno
= DCCP_SKB_CB(skb
)->dccpd_seq
,
194 ackno
= DCCP_SKB_CB(skb
)->dccpd_ack_seq
;
197 * Step 5: Prepare sequence numbers for Sync
198 * If P.type == Sync or P.type == SyncAck,
199 * If S.AWL <= P.ackno <= S.AWH and P.seqno >= S.SWL,
200 * / * P is valid, so update sequence number variables
201 * accordingly. After this update, P will pass the tests
202 * in Step 6. A SyncAck is generated if necessary in
204 * Update S.GSR, S.SWL, S.SWH
206 * Drop packet and return
208 if (dh
->dccph_type
== DCCP_PKT_SYNC
||
209 dh
->dccph_type
== DCCP_PKT_SYNCACK
) {
210 if (between48(ackno
, dp
->dccps_awl
, dp
->dccps_awh
) &&
211 dccp_delta_seqno(dp
->dccps_swl
, seqno
) >= 0)
212 dccp_update_gsr(sk
, seqno
);
218 * Step 6: Check sequence numbers
219 * Let LSWL = S.SWL and LAWL = S.AWL
220 * If P.type == CloseReq or P.type == Close or P.type == Reset,
221 * LSWL := S.GSR + 1, LAWL := S.GAR
222 * If LSWL <= P.seqno <= S.SWH
223 * and (P.ackno does not exist or LAWL <= P.ackno <= S.AWH),
224 * Update S.GSR, S.SWL, S.SWH
228 lswl
= dp
->dccps_swl
;
229 lawl
= dp
->dccps_awl
;
231 if (dh
->dccph_type
== DCCP_PKT_CLOSEREQ
||
232 dh
->dccph_type
== DCCP_PKT_CLOSE
||
233 dh
->dccph_type
== DCCP_PKT_RESET
) {
234 lswl
= ADD48(dp
->dccps_gsr
, 1);
235 lawl
= dp
->dccps_gar
;
238 if (between48(seqno
, lswl
, dp
->dccps_swh
) &&
239 (ackno
== DCCP_PKT_WITHOUT_ACK_SEQ
||
240 between48(ackno
, lawl
, dp
->dccps_awh
))) {
241 dccp_update_gsr(sk
, seqno
);
243 if (dh
->dccph_type
!= DCCP_PKT_SYNC
&&
244 ackno
!= DCCP_PKT_WITHOUT_ACK_SEQ
&&
245 after48(ackno
, dp
->dccps_gar
))
246 dp
->dccps_gar
= ackno
;
248 unsigned long now
= jiffies
;
250 * Step 6: Check sequence numbers
252 * If P.type == Reset,
253 * Send Sync packet acknowledging S.GSR
255 * Send Sync packet acknowledging P.seqno
256 * Drop packet and return
258 * These Syncs are rate-limited as per RFC 4340, 7.5.4:
259 * at most 1 / (dccp_sync_rate_limit * HZ) Syncs per second.
261 if (time_before(now
, (dp
->dccps_rate_last
+
262 sysctl_dccp_sync_ratelimit
)))
265 DCCP_WARN("Step 6 failed for %s packet, "
266 "(LSWL(%llu) <= P.seqno(%llu) <= S.SWH(%llu)) and "
267 "(P.ackno %s or LAWL(%llu) <= P.ackno(%llu) <= S.AWH(%llu), "
268 "sending SYNC...\n", dccp_packet_name(dh
->dccph_type
),
269 (unsigned long long) lswl
, (unsigned long long) seqno
,
270 (unsigned long long) dp
->dccps_swh
,
271 (ackno
== DCCP_PKT_WITHOUT_ACK_SEQ
) ? "doesn't exist"
273 (unsigned long long) lawl
, (unsigned long long) ackno
,
274 (unsigned long long) dp
->dccps_awh
);
276 dp
->dccps_rate_last
= now
;
278 if (dh
->dccph_type
== DCCP_PKT_RESET
)
279 seqno
= dp
->dccps_gsr
;
280 dccp_send_sync(sk
, seqno
, DCCP_PKT_SYNC
);
287 static int __dccp_rcv_established(struct sock
*sk
, struct sk_buff
*skb
,
288 const struct dccp_hdr
*dh
, const unsigned int len
)
290 struct dccp_sock
*dp
= dccp_sk(sk
);
292 switch (dccp_hdr(skb
)->dccph_type
) {
293 case DCCP_PKT_DATAACK
:
296 * FIXME: schedule DATA_DROPPED (RFC 4340, 11.7.2) if and when
297 * - sk_shutdown == RCV_SHUTDOWN, use Code 1, "Not Listening"
298 * - sk_receive_queue is full, use Code 2, "Receive Buffer"
300 dccp_enqueue_skb(sk
, skb
);
306 * Step 9: Process Reset
307 * If P.type == Reset,
308 * Tear down connection
309 * S.state := TIMEWAIT
311 * Drop packet and return
313 dccp_rcv_reset(sk
, skb
);
315 case DCCP_PKT_CLOSEREQ
:
316 if (dccp_rcv_closereq(sk
, skb
))
320 if (dccp_rcv_close(sk
, skb
))
323 case DCCP_PKT_REQUEST
:
325 * or (S.is_server and P.type == Response)
326 * or (S.is_client and P.type == Request)
327 * or (S.state >= OPEN and P.type == Request
328 * and P.seqno >= S.OSR)
329 * or (S.state >= OPEN and P.type == Response
330 * and P.seqno >= S.OSR)
331 * or (S.state == RESPOND and P.type == Data),
332 * Send Sync packet acknowledging P.seqno
333 * Drop packet and return
335 if (dp
->dccps_role
!= DCCP_ROLE_LISTEN
)
338 case DCCP_PKT_RESPONSE
:
339 if (dp
->dccps_role
!= DCCP_ROLE_CLIENT
)
342 if (dccp_delta_seqno(dp
->dccps_osr
,
343 DCCP_SKB_CB(skb
)->dccpd_seq
) >= 0) {
345 dccp_send_sync(sk
, DCCP_SKB_CB(skb
)->dccpd_seq
,
350 dccp_send_sync(sk
, DCCP_SKB_CB(skb
)->dccpd_seq
,
353 * From RFC 4340, sec. 5.7
355 * As with DCCP-Ack packets, DCCP-Sync and DCCP-SyncAck packets
356 * MAY have non-zero-length application data areas, whose
357 * contents receivers MUST ignore.
362 DCCP_INC_STATS(DCCP_MIB_INERRS
);
368 int dccp_rcv_established(struct sock
*sk
, struct sk_buff
*skb
,
369 const struct dccp_hdr
*dh
, const unsigned int len
)
371 if (dccp_check_seqno(sk
, skb
))
374 if (dccp_parse_options(sk
, NULL
, skb
))
377 dccp_handle_ackvec_processing(sk
, skb
);
378 dccp_deliver_input_to_ccids(sk
, skb
);
380 return __dccp_rcv_established(sk
, skb
, dh
, len
);
386 EXPORT_SYMBOL_GPL(dccp_rcv_established
);
388 static int dccp_rcv_request_sent_state_process(struct sock
*sk
,
390 const struct dccp_hdr
*dh
,
391 const unsigned int len
)
394 * Step 4: Prepare sequence numbers in REQUEST
395 * If S.state == REQUEST,
396 * If (P.type == Response or P.type == Reset)
397 * and S.AWL <= P.ackno <= S.AWH,
398 * / * Set sequence number variables corresponding to the
399 * other endpoint, so P will pass the tests in Step 6 * /
400 * Set S.GSR, S.ISR, S.SWL, S.SWH
401 * / * Response processing continues in Step 10; Reset
402 * processing continues in Step 9 * /
404 if (dh
->dccph_type
== DCCP_PKT_RESPONSE
) {
405 const struct inet_connection_sock
*icsk
= inet_csk(sk
);
406 struct dccp_sock
*dp
= dccp_sk(sk
);
407 long tstamp
= dccp_timestamp();
409 if (!between48(DCCP_SKB_CB(skb
)->dccpd_ack_seq
,
410 dp
->dccps_awl
, dp
->dccps_awh
)) {
411 dccp_pr_debug("invalid ackno: S.AWL=%llu, "
412 "P.ackno=%llu, S.AWH=%llu\n",
413 (unsigned long long)dp
->dccps_awl
,
414 (unsigned long long)DCCP_SKB_CB(skb
)->dccpd_ack_seq
,
415 (unsigned long long)dp
->dccps_awh
);
416 goto out_invalid_packet
;
420 * If option processing (Step 8) failed, return 1 here so that
421 * dccp_v4_do_rcv() sends a Reset. The Reset code depends on
422 * the option type and is set in dccp_parse_options().
424 if (dccp_parse_options(sk
, NULL
, skb
))
427 /* Obtain usec RTT sample from SYN exchange (used by TFRC). */
428 if (likely(dp
->dccps_options_received
.dccpor_timestamp_echo
))
429 dp
->dccps_syn_rtt
= dccp_sample_rtt(sk
, 10 * (tstamp
-
430 dp
->dccps_options_received
.dccpor_timestamp_echo
));
432 /* Stop the REQUEST timer */
433 inet_csk_clear_xmit_timer(sk
, ICSK_TIME_RETRANS
);
434 WARN_ON(sk
->sk_send_head
== NULL
);
435 kfree_skb(sk
->sk_send_head
);
436 sk
->sk_send_head
= NULL
;
439 * Set ISR, GSR from packet. ISS was set in dccp_v{4,6}_connect
440 * and GSS in dccp_transmit_skb(). Setting AWL/AWH and SWL/SWH
441 * is done as part of activating the feature values below, since
442 * these settings depend on the local/remote Sequence Window
443 * features, which were undefined or not confirmed until now.
445 dp
->dccps_gsr
= dp
->dccps_isr
= DCCP_SKB_CB(skb
)->dccpd_seq
;
447 dccp_sync_mss(sk
, icsk
->icsk_pmtu_cookie
);
450 * Step 10: Process REQUEST state (second part)
451 * If S.state == REQUEST,
452 * / * If we get here, P is a valid Response from the
453 * server (see Step 4), and we should move to
454 * PARTOPEN state. PARTOPEN means send an Ack,
455 * don't send Data packets, retransmit Acks
456 * periodically, and always include any Init Cookie
457 * from the Response * /
458 * S.state := PARTOPEN
460 * Continue with S.state == PARTOPEN
461 * / * Step 12 will send the Ack completing the
462 * three-way handshake * /
464 dccp_set_state(sk
, DCCP_PARTOPEN
);
467 * If feature negotiation was successful, activate features now;
468 * an activation failure means that this host could not activate
469 * one ore more features (e.g. insufficient memory), which would
470 * leave at least one feature in an undefined state.
472 if (dccp_feat_activate_values(sk
, &dp
->dccps_featneg
))
473 goto unable_to_proceed
;
475 /* Make sure socket is routed, for correct metrics. */
476 icsk
->icsk_af_ops
->rebuild_header(sk
);
478 if (!sock_flag(sk
, SOCK_DEAD
)) {
479 sk
->sk_state_change(sk
);
480 sk_wake_async(sk
, SOCK_WAKE_IO
, POLL_OUT
);
483 if (sk
->sk_write_pending
|| icsk
->icsk_ack
.pingpong
||
484 icsk
->icsk_accept_queue
.rskq_defer_accept
) {
485 /* Save one ACK. Data will be ready after
486 * several ticks, if write_pending is set.
488 * It may be deleted, but with this feature tcpdumps
489 * look so _wonderfully_ clever, that I was not able
490 * to stand against the temptation 8) --ANK
493 * OK, in DCCP we can as well do a similar trick, its
494 * even in the draft, but there is no need for us to
495 * schedule an ack here, as dccp_sendmsg does this for
496 * us, also stated in the draft. -acme
506 /* dccp_v4_do_rcv will send a reset */
507 DCCP_SKB_CB(skb
)->dccpd_reset_code
= DCCP_RESET_CODE_PACKET_ERROR
;
511 DCCP_SKB_CB(skb
)->dccpd_reset_code
= DCCP_RESET_CODE_ABORTED
;
513 * We mark this socket as no longer usable, so that the loop in
514 * dccp_sendmsg() terminates and the application gets notified.
516 dccp_set_state(sk
, DCCP_CLOSED
);
521 static int dccp_rcv_respond_partopen_state_process(struct sock
*sk
,
523 const struct dccp_hdr
*dh
,
524 const unsigned int len
)
526 struct dccp_sock
*dp
= dccp_sk(sk
);
527 u32 sample
= dp
->dccps_options_received
.dccpor_timestamp_echo
;
530 switch (dh
->dccph_type
) {
532 inet_csk_clear_xmit_timer(sk
, ICSK_TIME_DACK
);
535 if (sk
->sk_state
== DCCP_RESPOND
)
537 case DCCP_PKT_DATAACK
:
540 * FIXME: we should be resetting the PARTOPEN (DELACK) timer
541 * here but only if we haven't used the DELACK timer for
542 * something else, like sending a delayed ack for a TIMESTAMP
543 * echo, etc, for now were not clearing it, sending an extra
544 * ACK when there is nothing else to do in DELACK is not a big
548 /* Stop the PARTOPEN timer */
549 if (sk
->sk_state
== DCCP_PARTOPEN
)
550 inet_csk_clear_xmit_timer(sk
, ICSK_TIME_DACK
);
552 /* Obtain usec RTT sample from SYN exchange (used by TFRC). */
553 if (likely(sample
)) {
554 long delta
= dccp_timestamp() - sample
;
556 dp
->dccps_syn_rtt
= dccp_sample_rtt(sk
, 10 * delta
);
559 dp
->dccps_osr
= DCCP_SKB_CB(skb
)->dccpd_seq
;
560 dccp_set_state(sk
, DCCP_OPEN
);
562 if (dh
->dccph_type
== DCCP_PKT_DATAACK
||
563 dh
->dccph_type
== DCCP_PKT_DATA
) {
564 __dccp_rcv_established(sk
, skb
, dh
, len
);
565 queued
= 1; /* packet was queued
566 (by __dccp_rcv_established) */
574 int dccp_rcv_state_process(struct sock
*sk
, struct sk_buff
*skb
,
575 struct dccp_hdr
*dh
, unsigned int len
)
577 struct dccp_sock
*dp
= dccp_sk(sk
);
578 struct dccp_skb_cb
*dcb
= DCCP_SKB_CB(skb
);
579 const int old_state
= sk
->sk_state
;
583 * Step 3: Process LISTEN state
585 * If S.state == LISTEN,
586 * If P.type == Request or P contains a valid Init Cookie option,
587 * (* Must scan the packet's options to check for Init
588 * Cookies. Only Init Cookies are processed here,
589 * however; other options are processed in Step 8. This
590 * scan need only be performed if the endpoint uses Init
592 * (* Generate a new socket and switch to that socket *)
593 * Set S := new socket for this port pair
595 * Choose S.ISS (initial seqno) or set from Init Cookies
596 * Initialize S.GAR := S.ISS
597 * Set S.ISR, S.GSR, S.SWL, S.SWH from packet or Init
598 * Cookies Continue with S.state == RESPOND
599 * (* A Response packet will be generated in Step 11 *)
601 * Generate Reset(No Connection) unless P.type == Reset
602 * Drop packet and return
604 if (sk
->sk_state
== DCCP_LISTEN
) {
605 if (dh
->dccph_type
== DCCP_PKT_REQUEST
) {
606 if (inet_csk(sk
)->icsk_af_ops
->conn_request(sk
,
611 if (dh
->dccph_type
== DCCP_PKT_RESET
)
614 /* Caller (dccp_v4_do_rcv) will send Reset */
615 dcb
->dccpd_reset_code
= DCCP_RESET_CODE_NO_CONNECTION
;
617 } else if (sk
->sk_state
== DCCP_CLOSED
) {
618 dcb
->dccpd_reset_code
= DCCP_RESET_CODE_NO_CONNECTION
;
622 /* Step 6: Check sequence numbers (omitted in LISTEN/REQUEST state) */
623 if (sk
->sk_state
!= DCCP_REQUESTING
&& dccp_check_seqno(sk
, skb
))
627 * Step 7: Check for unexpected packet types
628 * If (S.is_server and P.type == Response)
629 * or (S.is_client and P.type == Request)
630 * or (S.state == RESPOND and P.type == Data),
631 * Send Sync packet acknowledging P.seqno
632 * Drop packet and return
634 if ((dp
->dccps_role
!= DCCP_ROLE_CLIENT
&&
635 dh
->dccph_type
== DCCP_PKT_RESPONSE
) ||
636 (dp
->dccps_role
== DCCP_ROLE_CLIENT
&&
637 dh
->dccph_type
== DCCP_PKT_REQUEST
) ||
638 (sk
->sk_state
== DCCP_RESPOND
&& dh
->dccph_type
== DCCP_PKT_DATA
)) {
639 dccp_send_sync(sk
, dcb
->dccpd_seq
, DCCP_PKT_SYNC
);
643 /* Step 8: Process options */
644 if (dccp_parse_options(sk
, NULL
, skb
))
648 * Step 9: Process Reset
649 * If P.type == Reset,
650 * Tear down connection
651 * S.state := TIMEWAIT
653 * Drop packet and return
655 if (dh
->dccph_type
== DCCP_PKT_RESET
) {
656 dccp_rcv_reset(sk
, skb
);
658 } else if (dh
->dccph_type
== DCCP_PKT_CLOSEREQ
) { /* Step 13 */
659 if (dccp_rcv_closereq(sk
, skb
))
662 } else if (dh
->dccph_type
== DCCP_PKT_CLOSE
) { /* Step 14 */
663 if (dccp_rcv_close(sk
, skb
))
668 switch (sk
->sk_state
) {
669 case DCCP_REQUESTING
:
670 queued
= dccp_rcv_request_sent_state_process(sk
, skb
, dh
, len
);
678 /* Step 8: if using Ack Vectors, mark packet acknowledgeable */
679 dccp_handle_ackvec_processing(sk
, skb
);
680 dccp_deliver_input_to_ccids(sk
, skb
);
683 queued
= dccp_rcv_respond_partopen_state_process(sk
, skb
,
688 if (dh
->dccph_type
== DCCP_PKT_ACK
||
689 dh
->dccph_type
== DCCP_PKT_DATAACK
) {
692 sk
->sk_state_change(sk
);
693 sk_wake_async(sk
, SOCK_WAKE_IO
, POLL_OUT
);
696 } else if (unlikely(dh
->dccph_type
== DCCP_PKT_SYNC
)) {
697 dccp_send_sync(sk
, dcb
->dccpd_seq
, DCCP_PKT_SYNCACK
);
708 EXPORT_SYMBOL_GPL(dccp_rcv_state_process
);
711 * dccp_sample_rtt - Validate and finalise computation of RTT sample
712 * @delta: number of microseconds between packet and acknowledgment
714 * The routine is kept generic to work in different contexts. It should be
715 * called immediately when the ACK used for the RTT sample arrives.
717 u32
dccp_sample_rtt(struct sock
*sk
, long delta
)
719 /* dccpor_elapsed_time is either zeroed out or set and > 0 */
720 delta
-= dccp_sk(sk
)->dccps_options_received
.dccpor_elapsed_time
* 10;
722 if (unlikely(delta
<= 0)) {
723 DCCP_WARN("unusable RTT sample %ld, using min\n", delta
);
724 return DCCP_SANE_RTT_MIN
;
726 if (unlikely(delta
> DCCP_SANE_RTT_MAX
)) {
727 DCCP_WARN("RTT sample %ld too large, using max\n", delta
);
728 return DCCP_SANE_RTT_MAX
;