1 /******************************************************************************
3 * Name: actbl3.h - ACPI Table Definitions
5 *****************************************************************************/
8 * Copyright (C) 2000 - 2013, Intel Corp.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
47 /*******************************************************************************
49 * Additional ACPI Tables (3)
51 * These tables are not consumed directly by the ACPICA subsystem, but are
52 * included here to support device drivers and the AML disassembler.
54 * The tables in this file are fully defined within the ACPI specification.
56 ******************************************************************************/
59 * Values for description table header signatures for tables defined in this
60 * file. Useful because they make it more difficult to inadvertently type in
61 * the wrong signature.
63 #define ACPI_SIG_BGRT "BGRT" /* Boot Graphics Resource Table */
64 #define ACPI_SIG_DRTM "DRTM" /* Dynamic Root of Trust for Measurement table */
65 #define ACPI_SIG_FPDT "FPDT" /* Firmware Performance Data Table */
66 #define ACPI_SIG_GTDT "GTDT" /* Generic Timer Description Table */
67 #define ACPI_SIG_MPST "MPST" /* Memory Power State Table */
68 #define ACPI_SIG_PCCT "PCCT" /* Platform Communications Channel Table */
69 #define ACPI_SIG_PMTT "PMTT" /* Platform Memory Topology Table */
70 #define ACPI_SIG_RASF "RASF" /* RAS Feature table */
71 #define ACPI_SIG_TPM2 "TPM2" /* Trusted Platform Module 2.0 H/W interface table */
73 #define ACPI_SIG_S3PT "S3PT" /* S3 Performance (sub)Table */
74 #define ACPI_SIG_PCCS "PCC" /* PCC Shared Memory Region */
76 /* Reserved table signatures */
78 #define ACPI_SIG_MATR "MATR" /* Memory Address Translation Table */
79 #define ACPI_SIG_MSDM "MSDM" /* Microsoft Data Management Table */
80 #define ACPI_SIG_WPBT "WPBT" /* Windows Platform Binary Table */
83 * All tables must be byte-packed to match the ACPI specification, since
84 * the tables are provided by the system BIOS.
89 * Note: C bitfields are not used for this reason:
91 * "Bitfields are great and easy to read, but unfortunately the C language
92 * does not specify the layout of bitfields in memory, which means they are
93 * essentially useless for dealing with packed data in on-disk formats or
94 * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
95 * this decision was a design error in C. Ritchie could have picked an order
96 * and stuck with it." Norman Ramsey.
97 * See http://stackoverflow.com/a/1053662/41661
100 /*******************************************************************************
102 * BGRT - Boot Graphics Resource Table (ACPI 5.0)
105 ******************************************************************************/
107 struct acpi_table_bgrt
{
108 struct acpi_table_header header
; /* Common ACPI table header */
117 /*******************************************************************************
119 * DRTM - Dynamic Root of Trust for Measurement table
121 ******************************************************************************/
123 struct acpi_table_drtm
{
124 struct acpi_table_header header
; /* Common ACPI table header */
125 u64 entry_base_address
;
130 u64 log_area_address
;
132 u64 arch_dependent_address
;
136 /* 1) Validated Tables List */
138 struct acpi_drtm_vtl_list
{
139 u32 validated_table_list_count
;
142 /* 2) Resources List */
144 struct acpi_drtm_resource_list
{
145 u32 resource_list_count
;
148 /* 3) Platform-specific Identifiers List */
150 struct acpi_drtm_id_list
{
154 /*******************************************************************************
156 * FPDT - Firmware Performance Data Table (ACPI 5.0)
159 ******************************************************************************/
161 struct acpi_table_fpdt
{
162 struct acpi_table_header header
; /* Common ACPI table header */
165 /* FPDT subtable header */
167 struct acpi_fpdt_header
{
173 /* Values for Type field above */
175 enum acpi_fpdt_type
{
176 ACPI_FPDT_TYPE_BOOT
= 0,
177 ACPI_FPDT_TYPE_S3PERF
= 1
184 /* 0: Firmware Basic Boot Performance Record */
186 struct acpi_fpdt_boot
{
187 struct acpi_fpdt_header header
;
192 u64 exit_services_entry
;
193 u64 exit_services_exit
;
196 /* 1: S3 Performance Table Pointer Record */
198 struct acpi_fpdt_s3pt_ptr
{
199 struct acpi_fpdt_header header
;
205 * S3PT - S3 Performance Table. This table is pointed to by the
206 * FPDT S3 Pointer Record above.
208 struct acpi_table_s3pt
{
209 u8 signature
[4]; /* "S3PT" */
216 struct acpi_s3pt_header
{
222 /* Values for Type field above */
224 enum acpi_s3pt_type
{
225 ACPI_S3PT_TYPE_RESUME
= 0,
226 ACPI_S3PT_TYPE_SUSPEND
= 1
229 struct acpi_s3pt_resume
{
230 struct acpi_s3pt_header header
;
236 struct acpi_s3pt_suspend
{
237 struct acpi_s3pt_header header
;
242 /*******************************************************************************
244 * GTDT - Generic Timer Description Table (ACPI 5.0)
247 ******************************************************************************/
249 struct acpi_table_gtdt
{
250 struct acpi_table_header header
; /* Common ACPI table header */
253 u32 secure_pl1_interrupt
;
254 u32 secure_pl1_flags
;
255 u32 non_secure_pl1_interrupt
;
256 u32 non_secure_pl1_flags
;
257 u32 virtual_timer_interrupt
;
258 u32 virtual_timer_flags
;
259 u32 non_secure_pl2_interrupt
;
260 u32 non_secure_pl2_flags
;
263 /* Values for Flags field above */
265 #define ACPI_GTDT_MAPPED_BLOCK_PRESENT 1
267 /* Values for all "TimerFlags" fields above */
269 #define ACPI_GTDT_INTERRUPT_MODE 1
270 #define ACPI_GTDT_INTERRUPT_POLARITY 2
272 /*******************************************************************************
274 * MPST - Memory Power State Table (ACPI 5.0)
277 ******************************************************************************/
279 #define ACPI_MPST_CHANNEL_INFO \
282 u16 power_node_count; \
287 struct acpi_table_mpst
{
288 struct acpi_table_header header
; /* Common ACPI table header */
289 ACPI_MPST_CHANNEL_INFO
/* Platform Communication Channel */
292 /* Memory Platform Communication Channel Info */
294 struct acpi_mpst_channel
{
295 ACPI_MPST_CHANNEL_INFO
/* Platform Communication Channel */
298 /* Memory Power Node Structure */
300 struct acpi_mpst_power_node
{
307 u32 num_power_states
;
308 u32 num_physical_components
;
311 /* Values for Flags field above */
313 #define ACPI_MPST_ENABLED 1
314 #define ACPI_MPST_POWER_MANAGED 2
315 #define ACPI_MPST_HOT_PLUG_CAPABLE 4
317 /* Memory Power State Structure (follows POWER_NODE above) */
319 struct acpi_mpst_power_state
{
324 /* Physical Component ID Structure (follows POWER_STATE above) */
326 struct acpi_mpst_component
{
330 /* Memory Power State Characteristics Structure (follows all POWER_NODEs) */
332 struct acpi_mpst_data_hdr
{
333 u16 characteristics_count
;
337 struct acpi_mpst_power_data
{
347 /* Values for Flags field above */
349 #define ACPI_MPST_PRESERVE 1
350 #define ACPI_MPST_AUTOENTRY 2
351 #define ACPI_MPST_AUTOEXIT 4
353 /* Shared Memory Region (not part of an ACPI table) */
355 struct acpi_mpst_shared
{
359 u32 command_register
;
367 /*******************************************************************************
369 * PCCT - Platform Communications Channel Table (ACPI 5.0)
372 ******************************************************************************/
374 struct acpi_table_pcct
{
375 struct acpi_table_header header
; /* Common ACPI table header */
381 /* Values for Flags field above */
383 #define ACPI_PCCT_DOORBELL 1
389 /* 0: Generic Communications Subspace */
391 struct acpi_pcct_subspace
{
392 struct acpi_subtable_header header
;
396 struct acpi_generic_address doorbell_register
;
402 * PCC memory structures (not part of the ACPI table)
405 /* Shared Memory Region */
407 struct acpi_pcct_shared_memory
{
413 /*******************************************************************************
415 * PMTT - Platform Memory Topology Table (ACPI 5.0)
418 ******************************************************************************/
420 struct acpi_table_pmtt
{
421 struct acpi_table_header header
; /* Common ACPI table header */
425 /* Common header for PMTT subtables that follow main table */
427 struct acpi_pmtt_header
{
435 /* Values for Type field above */
437 #define ACPI_PMTT_TYPE_SOCKET 0
438 #define ACPI_PMTT_TYPE_CONTROLLER 1
439 #define ACPI_PMTT_TYPE_DIMM 2
440 #define ACPI_PMTT_TYPE_RESERVED 3 /* 0x03-0xFF are reserved */
442 /* Values for Flags field above */
444 #define ACPI_PMTT_TOP_LEVEL 0x0001
445 #define ACPI_PMTT_PHYSICAL 0x0002
446 #define ACPI_PMTT_MEMORY_TYPE 0x000C
449 * PMTT subtables, correspond to Type in struct acpi_pmtt_header
452 /* 0: Socket Structure */
454 struct acpi_pmtt_socket
{
455 struct acpi_pmtt_header header
;
460 /* 1: Memory Controller subtable */
462 struct acpi_pmtt_controller
{
463 struct acpi_pmtt_header header
;
474 /* 1a: Proximity Domain substructure */
476 struct acpi_pmtt_domain
{
477 u32 proximity_domain
;
480 /* 2: Physical Component Identifier (DIMM) */
482 struct acpi_pmtt_physical_component
{
483 struct acpi_pmtt_header header
;
490 /*******************************************************************************
492 * RASF - RAS Feature Table (ACPI 5.0)
495 ******************************************************************************/
497 struct acpi_table_rasf
{
498 struct acpi_table_header header
; /* Common ACPI table header */
502 /* RASF Platform Communication Channel Shared Memory Region */
504 struct acpi_rasf_shared_memory
{
510 u8 set_capabilities
[16];
511 u16 num_parameter_blocks
;
512 u32 set_capabilities_status
;
515 /* RASF Parameter Block Structure Header */
517 struct acpi_rasf_parameter_block
{
523 /* RASF Parameter Block Structure for PATROL_SCRUB */
525 struct acpi_rasf_patrol_scrub_parameter
{
526 struct acpi_rasf_parameter_block header
;
527 u16 patrol_scrub_command
;
528 u64 requested_address_range
[2];
529 u64 actual_address_range
[2];
534 /* Masks for Flags and Speed fields above */
536 #define ACPI_RASF_SCRUBBER_RUNNING 1
537 #define ACPI_RASF_SPEED (7<<1)
538 #define ACPI_RASF_SPEED_SLOW (0<<1)
539 #define ACPI_RASF_SPEED_MEDIUM (4<<1)
540 #define ACPI_RASF_SPEED_FAST (7<<1)
542 /* Channel Commands */
544 enum acpi_rasf_commands
{
545 ACPI_RASF_EXECUTE_RASF_COMMAND
= 1
548 /* Platform RAS Capabilities */
550 enum acpi_rasf_capabiliities
{
551 ACPI_HW_PATROL_SCRUB_SUPPORTED
= 0,
552 ACPI_SW_PATROL_SCRUB_EXPOSED
= 1
555 /* Patrol Scrub Commands */
557 enum acpi_rasf_patrol_scrub_commands
{
558 ACPI_RASF_GET_PATROL_PARAMETERS
= 1,
559 ACPI_RASF_START_PATROL_SCRUBBER
= 2,
560 ACPI_RASF_STOP_PATROL_SCRUBBER
= 3
563 /* Channel Command flags */
565 #define ACPI_RASF_GENERATE_SCI (1<<15)
569 enum acpi_rasf_status
{
570 ACPI_RASF_SUCCESS
= 0,
571 ACPI_RASF_NOT_VALID
= 1,
572 ACPI_RASF_NOT_SUPPORTED
= 2,
574 ACPI_RASF_FAILED
= 4,
575 ACPI_RASF_ABORTED
= 5,
576 ACPI_RASF_INVALID_DATA
= 6
581 #define ACPI_RASF_COMMAND_COMPLETE (1)
582 #define ACPI_RASF_SCI_DOORBELL (1<<1)
583 #define ACPI_RASF_ERROR (1<<2)
584 #define ACPI_RASF_STATUS (0x1F<<3)
586 /*******************************************************************************
588 * TPM2 - Trusted Platform Module (TPM) 2.0 Hardware Interface Table
591 * Conforms to "TPM 2.0 Hardware Interface Table (TPM2)" 29 November 2011
593 ******************************************************************************/
595 struct acpi_table_tpm2
{
596 struct acpi_table_header header
; /* Common ACPI table header */
602 /* Control area structure (not part of table, pointed to by control_address) */
604 struct acpi_tpm2_control
{
609 u64 interrupt_control
;
613 u64 response_address
;
616 /* Reset to default packing */
620 #endif /* __ACTBL3_H__ */