include/net/mac802154.h

   1 /*
   2  * IEEE802.15.4-2003 specification
   3  *
   4  * Copyright (C) 2007-2012 Siemens AG
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2
   8  * as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License along
  16  * with this program; if not, write to the Free Software Foundation, Inc.,
  17  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  18  */
  19 #ifndef NET_MAC802154_H
  20 #define NET_MAC802154_H
  21
  22 #include <net/af_ieee802154.h>
  23 #include <linux/skbuff.h>
  24
  25 /* General MAC frame format:
  26  *  2 bytes: Frame Control
  27  *  1 byte:  Sequence Number
  28  * 20 bytes: Addressing fields
  29  * 14 bytes: Auxiliary Security Header
  30  */
  31 #define MAC802154_FRAME_HARD_HEADER_LEN         (2 + 1 + 20 + 14)
  32
  33 /* The following flags are used to indicate changed address settings from
  34  * the stack to the hardware.
  35  */
  36
  37 /* indicates that the Short Address changed */
  38 #define IEEE802154_AFILT_SADDR_CHANGED          0x00000001
  39 /* indicates that the IEEE Address changed */
  40 #define IEEE802154_AFILT_IEEEADDR_CHANGED       0x00000002
  41 /* indicates that the PAN ID changed */
  42 #define IEEE802154_AFILT_PANID_CHANGED          0x00000004
  43 /* indicates that PAN Coordinator status changed */
  44 #define IEEE802154_AFILT_PANC_CHANGED           0x00000008
  45
  46 struct ieee802154_hw_addr_filt {
  47         __le16  pan_id;         /* Each independent PAN selects a unique
  48                                  * identifier. This PAN id allows communication
  49                                  * between devices within a network using short
  50                                  * addresses and enables transmissions between
  51                                  * devices across independent networks.
  52                                  */
  53         __le16  short_addr;
  54         __le64  ieee_addr;
  55         u8      pan_coord;
  56 };
  57
  58 struct ieee802154_dev {
  59         /* filled by the driver */
  60         int     extra_tx_headroom;
  61         u32     flags;
  62         struct  device *parent;
  63
  64         /* filled by mac802154 core */
  65         struct  ieee802154_hw_addr_filt hw_filt;
  66         void    *priv;
  67         struct  wpan_phy *phy;
  68 };
  69
  70 /* Checksum is in hardware and is omitted from a packet
  71  *
  72  * These following flags are used to indicate hardware capabilities to
  73  * the stack. Generally, flags here should have their meaning
  74  * done in a way that the simplest hardware doesn't need setting
  75  * any particular flags. There are some exceptions to this rule,
  76  * however, so you are advised to review these flags carefully.
  77  */
  78
  79 /* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */
  80 #define IEEE802154_HW_OMIT_CKSUM        0x00000001
  81 /* Indicates that receiver will autorespond with ACK frames. */
  82 #define IEEE802154_HW_AACK              0x00000002
  83 /* Indicates that transceiver will support transmit power setting. */
  84 #define IEEE802154_HW_TXPOWER           0x00000004
  85 /* Indicates that transceiver will support listen before transmit. */
  86 #define IEEE802154_HW_LBT               0x00000008
  87 /* Indicates that transceiver will support cca mode setting. */
  88 #define IEEE802154_HW_CCA_MODE          0x00000010
  89 /* Indicates that transceiver will support cca ed level setting. */
  90 #define IEEE802154_HW_CCA_ED_LEVEL      0x00000020
  91 /* Indicates that transceiver will support csma (max_be, min_be, csma retries)
  92  * settings. */
  93 #define IEEE802154_HW_CSMA_PARAMS       0x00000040
  94 /* Indicates that transceiver will support ARET frame retries setting. */
  95 #define IEEE802154_HW_FRAME_RETRIES     0x00000080
  96
  97 /* This groups the most common CSMA support fields into one. */
  98 #define IEEE802154_HW_CSMA              (IEEE802154_HW_CCA_MODE | \
  99                                          IEEE802154_HW_CCA_ED_LEVEL | \
 100                                          IEEE802154_HW_CSMA_PARAMS | \
 101                                          IEEE802154_HW_FRAME_RETRIES)
 102
 103 /* struct ieee802154_ops - callbacks from mac802154 to the driver
 104  *
 105  * This structure contains various callbacks that the driver may
 106  * handle or, in some cases, must handle, for example to transmit
 107  * a frame.
 108  *
 109  * start: Handler that 802.15.4 module calls for device initialization.
 110  *        This function is called before the first interface is attached.
 111  *
 112  * stop:  Handler that 802.15.4 module calls for device cleanup.
 113  *        This function is called after the last interface is removed.
 114  *
 115  * xmit:  Handler that 802.15.4 module calls for each transmitted frame.
 116  *        skb cntains the buffer starting from the IEEE 802.15.4 header.
 117  *        The low-level driver should send the frame based on available
 118  *        configuration.
 119  *        This function should return zero or negative errno. Called with
 120  *        pib_lock held.
 121  *
 122  * ed:    Handler that 802.15.4 module calls for Energy Detection.
 123  *        This function should place the value for detected energy
 124  *        (usually device-dependant) in the level pointer and return
 125  *        either zero or negative errno. Called with pib_lock held.
 126  *
 127  * set_channel:
 128  *        Set radio for listening on specific channel.
 129  *        Set the device for listening on specified channel.
 130  *        Returns either zero, or negative errno. Called with pib_lock held.
 131  *
 132  * set_hw_addr_filt:
 133  *        Set radio for listening on specific address.
 134  *        Set the device for listening on specified address.
 135  *        Returns either zero, or negative errno.
 136  *
 137  * set_txpower:
 138  *        Set radio transmit power in dB. Called with pib_lock held.
 139  *        Returns either zero, or negative errno.
 140  *
 141  * set_lbt
 142  *        Enables or disables listen before talk on the device. Called with
 143  *        pib_lock held.
 144  *        Returns either zero, or negative errno.
 145  *
 146  * set_cca_mode
 147  *        Sets the CCA mode used by the device. Called with pib_lock held.
 148  *        Returns either zero, or negative errno.
 149  *
 150  * set_cca_ed_level
 151  *        Sets the CCA energy detection threshold in dBm. Called with pib_lock
 152  *        held.
 153  *        Returns either zero, or negative errno.
 154  *
 155  * set_csma_params
 156  *        Sets the CSMA parameter set for the PHY. Called with pib_lock held.
 157  *        Returns either zero, or negative errno.
 158  *
 159  * set_frame_retries
 160  *        Sets the retransmission attempt limit. Called with pib_lock held.
 161  *        Returns either zero, or negative errno.
 162  */
 163 struct ieee802154_ops {
 164         struct module   *owner;
 165         int             (*start)(struct ieee802154_dev *dev);
 166         void            (*stop)(struct ieee802154_dev *dev);
 167         int             (*xmit)(struct ieee802154_dev *dev,
 168                                 struct sk_buff *skb);
 169         int             (*ed)(struct ieee802154_dev *dev, u8 *level);
 170         int             (*set_channel)(struct ieee802154_dev *dev,
 171                                        int page,
 172                                        int channel);
 173         int             (*set_hw_addr_filt)(struct ieee802154_dev *dev,
 174                                           struct ieee802154_hw_addr_filt *filt,
 175                                             unsigned long changed);
 176         int             (*ieee_addr)(struct ieee802154_dev *dev, __le64 addr);
 177         int             (*set_txpower)(struct ieee802154_dev *dev, int db);
 178         int             (*set_lbt)(struct ieee802154_dev *dev, bool on);
 179         int             (*set_cca_mode)(struct ieee802154_dev *dev, u8 mode);
 180         int             (*set_cca_ed_level)(struct ieee802154_dev *dev,
 181                                             s32 level);
 182         int             (*set_csma_params)(struct ieee802154_dev *dev,
 183                                            u8 min_be, u8 max_be, u8 retries);
 184         int             (*set_frame_retries)(struct ieee802154_dev *dev,
 185                                              s8 retries);
 186 };
 187
 188 /* Basic interface to register ieee802154 device */
 189 struct ieee802154_dev *
 190 ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops);
 191 void ieee802154_free_device(struct ieee802154_dev *dev);
 192 int ieee802154_register_device(struct ieee802154_dev *dev);
 193 void ieee802154_unregister_device(struct ieee802154_dev *dev);
 194
 195 void ieee802154_rx_irqsafe(struct ieee802154_dev *dev, struct sk_buff *skb,
 196                            u8 lqi);
 197
 198 #endif /* NET_MAC802154_H */