Merge tag 'rproc-v4.15' of git://github.com/andersson/remoteproc

[linux/fpc-iii.git] / Documentation / RCU / rcu_dereference.txt

PROPER CARE AND FEEDING OF RETURN VALUES FROM rcu_dereference()

Most of the time, you can use values from rcu_dereference() or one of
the similar primitives without worries.  Dereferencing (prefix "*"),
field selection ("->"), assignment ("="), address-of ("&"), addition and
subtraction of constants, and casts all work quite naturally and safely.

It is nevertheless possible to get into trouble with other operations.
Follow these rules to keep your RCU code working properly:

o       You must use one of the rcu_dereference() family of primitives
        to load an RCU-protected pointer, otherwise CONFIG_PROVE_RCU
        will complain.  Worse yet, your code can see random memory-corruption
        bugs due to games that compilers and DEC Alpha can play.
        Without one of the rcu_dereference() primitives, compilers
        can reload the value, and won't your code have fun with two
        different values for a single pointer!  Without rcu_dereference(),
        DEC Alpha can load a pointer, dereference that pointer, and
        return data preceding initialization that preceded the store of
        the pointer.

        In addition, the volatile cast in rcu_dereference() prevents the
        compiler from deducing the resulting pointer value.  Please see
        the section entitled "EXAMPLE WHERE THE COMPILER KNOWS TOO MUCH"
        for an example where the compiler can in fact deduce the exact
        value of the pointer, and thus cause misordering.

o       You are only permitted to use rcu_dereference on pointer values.
        The compiler simply knows too much about integral values to
        trust it to carry dependencies through integer operations.
        There are a very few exceptions, namely that you can temporarily
        cast the pointer to uintptr_t in order to:

        o       Set bits and clear bits down in the must-be-zero low-order
                bits of that pointer.  This clearly means that the pointer
                must have alignment constraints, for example, this does
                -not- work in general for char* pointers.

        o       XOR bits to translate pointers, as is done in some
                classic buddy-allocator algorithms.

        It is important to cast the value back to pointer before
        doing much of anything else with it.

o       Avoid cancellation when using the "+" and "-" infix arithmetic
        operators.  For example, for a given variable "x", avoid
        "(x-(uintptr_t)x)" for char* pointers.  The compiler is within its
        rights to substitute zero for this sort of expression, so that
        subsequent accesses no longer depend on the rcu_dereference(),
        again possibly resulting in bugs due to misordering.

        Of course, if "p" is a pointer from rcu_dereference(), and "a"
        and "b" are integers that happen to be equal, the expression
        "p+a-b" is safe because its value still necessarily depends on
        the rcu_dereference(), thus maintaining proper ordering.

o       If you are using RCU to protect JITed functions, so that the
        "()" function-invocation operator is applied to a value obtained
        (directly or indirectly) from rcu_dereference(), you may need to
        interact directly with the hardware to flush instruction caches.
        This issue arises on some systems when a newly JITed function is
        using the same memory that was used by an earlier JITed function.

o       Do not use the results from relational operators ("==", "!=",
        ">", ">=", "<", or "<=") when dereferencing.  For example,
        the following (quite strange) code is buggy:

                int *p;
                int *q;

                ...

                p = rcu_dereference(gp)
                q = &global_q;
                q += p > &oom_p;
                r1 = *q;  /* BUGGY!!! */

        As before, the reason this is buggy is that relational operators
        are often compiled using branches.  And as before, although
        weak-memory machines such as ARM or PowerPC do order stores
        after such branches, but can speculate loads, which can again
        result in misordering bugs.

o       Be very careful about comparing pointers obtained from
        rcu_dereference() against non-NULL values.  As Linus Torvalds
        explained, if the two pointers are equal, the compiler could
        substitute the pointer you are comparing against for the pointer
        obtained from rcu_dereference().  For example:

                p = rcu_dereference(gp);
                if (p == &default_struct)
                        do_default(p->a);

        Because the compiler now knows that the value of "p" is exactly
        the address of the variable "default_struct", it is free to
        transform this code into the following:

                p = rcu_dereference(gp);
                if (p == &default_struct)
                        do_default(default_struct.a);

        On ARM and Power hardware, the load from "default_struct.a"
        can now be speculated, such that it might happen before the
        rcu_dereference().  This could result in bugs due to misordering.

        However, comparisons are OK in the following cases:

        o       The comparison was against the NULL pointer.  If the
                compiler knows that the pointer is NULL, you had better
                not be dereferencing it anyway.  If the comparison is
                non-equal, the compiler is none the wiser.  Therefore,
                it is safe to compare pointers from rcu_dereference()
                against NULL pointers.

        o       The pointer is never dereferenced after being compared.
                Since there are no subsequent dereferences, the compiler
                cannot use anything it learned from the comparison
                to reorder the non-existent subsequent dereferences.
                This sort of comparison occurs frequently when scanning
                RCU-protected circular linked lists.

                Note that if checks for being within an RCU read-side
                critical section are not required and the pointer is never
                dereferenced, rcu_access_pointer() should be used in place
                of rcu_dereference(). The rcu_access_pointer() primitive
                does not require an enclosing read-side critical section,
                and also omits the smp_read_barrier_depends() included in
                rcu_dereference(), which in turn should provide a small
                performance gain in some CPUs (e.g., the DEC Alpha).

        o       The comparison is against a pointer that references memory
                that was initialized "a long time ago."  The reason
                this is safe is that even if misordering occurs, the
                misordering will not affect the accesses that follow
                the comparison.  So exactly how long ago is "a long
                time ago"?  Here are some possibilities:

                o       Compile time.

                o       Boot time.

                o       Module-init time for module code.

                o       Prior to kthread creation for kthread code.

                o       During some prior acquisition of the lock that
                        we now hold.

                o       Before mod_timer() time for a timer handler.

                There are many other possibilities involving the Linux
                kernel's wide array of primitives that cause code to
                be invoked at a later time.

        o       The pointer being compared against also came from
                rcu_dereference().  In this case, both pointers depend
                on one rcu_dereference() or another, so you get proper
                ordering either way.

                That said, this situation can make certain RCU usage
                bugs more likely to happen.  Which can be a good thing,
                at least if they happen during testing.  An example
                of such an RCU usage bug is shown in the section titled
                "EXAMPLE OF AMPLIFIED RCU-USAGE BUG".

        o       All of the accesses following the comparison are stores,
                so that a control dependency preserves the needed ordering.
                That said, it is easy to get control dependencies wrong.
                Please see the "CONTROL DEPENDENCIES" section of
                Documentation/memory-barriers.txt for more details.

        o       The pointers are not equal -and- the compiler does
                not have enough information to deduce the value of the
                pointer.  Note that the volatile cast in rcu_dereference()
                will normally prevent the compiler from knowing too much.

                However, please note that if the compiler knows that the
                pointer takes on only one of two values, a not-equal
                comparison will provide exactly the information that the
                compiler needs to deduce the value of the pointer.

o       Disable any value-speculation optimizations that your compiler
        might provide, especially if you are making use of feedback-based
        optimizations that take data collected from prior runs.  Such
        value-speculation optimizations reorder operations by design.

        There is one exception to this rule:  Value-speculation
        optimizations that leverage the branch-prediction hardware are
        safe on strongly ordered systems (such as x86), but not on weakly
        ordered systems (such as ARM or Power).  Choose your compiler
        command-line options wisely!


EXAMPLE OF AMPLIFIED RCU-USAGE BUG

Because updaters can run concurrently with RCU readers, RCU readers can
see stale and/or inconsistent values.  If RCU readers need fresh or
consistent values, which they sometimes do, they need to take proper
precautions.  To see this, consider the following code fragment:

        struct foo {
                int a;
                int b;
                int c;
        };
        struct foo *gp1;
        struct foo *gp2;

        void updater(void)
        {
                struct foo *p;

                p = kmalloc(...);
                if (p == NULL)
                        deal_with_it();
                p->a = 42;  /* Each field in its own cache line. */
                p->b = 43;
                p->c = 44;
                rcu_assign_pointer(gp1, p);
                p->b = 143;
                p->c = 144;
                rcu_assign_pointer(gp2, p);
        }

        void reader(void)
        {
                struct foo *p;
                struct foo *q;
                int r1, r2;

                p = rcu_dereference(gp2);
                if (p == NULL)
                        return;
                r1 = p->b;  /* Guaranteed to get 143. */
                q = rcu_dereference(gp1);  /* Guaranteed non-NULL. */
                if (p == q) {
                        /* The compiler decides that q->c is same as p->c. */
                        r2 = p->c; /* Could get 44 on weakly order system. */
                }
                do_something_with(r1, r2);
        }

You might be surprised that the outcome (r1 == 143 && r2 == 44) is possible,
but you should not be.  After all, the updater might have been invoked
a second time between the time reader() loaded into "r1" and the time
that it loaded into "r2".  The fact that this same result can occur due
to some reordering from the compiler and CPUs is beside the point.

But suppose that the reader needs a consistent view?

Then one approach is to use locking, for example, as follows:

        struct foo {
                int a;
                int b;
                int c;
                spinlock_t lock;
        };
        struct foo *gp1;
        struct foo *gp2;

        void updater(void)
        {
                struct foo *p;

                p = kmalloc(...);
                if (p == NULL)
                        deal_with_it();
                spin_lock(&p->lock);
                p->a = 42;  /* Each field in its own cache line. */
                p->b = 43;
                p->c = 44;
                spin_unlock(&p->lock);
                rcu_assign_pointer(gp1, p);
                spin_lock(&p->lock);
                p->b = 143;
                p->c = 144;
                spin_unlock(&p->lock);
                rcu_assign_pointer(gp2, p);
        }

        void reader(void)
        {
                struct foo *p;
                struct foo *q;
                int r1, r2;

                p = rcu_dereference(gp2);
                if (p == NULL)
                        return;
                spin_lock(&p->lock);
                r1 = p->b;  /* Guaranteed to get 143. */
                q = rcu_dereference(gp1);  /* Guaranteed non-NULL. */
                if (p == q) {
                        /* The compiler decides that q->c is same as p->c. */
                        r2 = p->c; /* Locking guarantees r2 == 144. */
                }
                spin_unlock(&p->lock);
                do_something_with(r1, r2);
        }

As always, use the right tool for the job!


EXAMPLE WHERE THE COMPILER KNOWS TOO MUCH

If a pointer obtained from rcu_dereference() compares not-equal to some
other pointer, the compiler normally has no clue what the value of the
first pointer might be.  This lack of knowledge prevents the compiler
from carrying out optimizations that otherwise might destroy the ordering
guarantees that RCU depends on.  And the volatile cast in rcu_dereference()
should prevent the compiler from guessing the value.

But without rcu_dereference(), the compiler knows more than you might
expect.  Consider the following code fragment:

        struct foo {
                int a;
                int b;
        };
        static struct foo variable1;
        static struct foo variable2;
        static struct foo *gp = &variable1;

        void updater(void)
        {
                initialize_foo(&variable2);
                rcu_assign_pointer(gp, &variable2);
                /*
                 * The above is the only store to gp in this translation unit,
                 * and the address of gp is not exported in any way.
                 */
        }

        int reader(void)
        {
                struct foo *p;

                p = gp;
                barrier();
                if (p == &variable1)
                        return p->a; /* Must be variable1.a. */
                else
                        return p->b; /* Must be variable2.b. */
        }

Because the compiler can see all stores to "gp", it knows that the only
possible values of "gp" are "variable1" on the one hand and "variable2"
on the other.  The comparison in reader() therefore tells the compiler
the exact value of "p" even in the not-equals case.  This allows the
compiler to make the return values independent of the load from "gp",
in turn destroying the ordering between this load and the loads of the
return values.  This can result in "p->b" returning pre-initialization
garbage values.

In short, rcu_dereference() is -not- optional when you are going to
dereference the resulting pointer.