arch/nds32/include/asm/l2_cache.h

   1 // SPDX-License-Identifier: GPL-2.0
   2 // Copyright (C) 2005-2017 Andes Technology Corporation
   3
   4 #ifndef L2_CACHE_H
   5 #define L2_CACHE_H
   6
   7 /* CCTL_CMD_OP */
   8 #define L2_CA_CONF_OFF          0x0
   9 #define L2_IF_CONF_OFF          0x4
  10 #define L2CC_SETUP_OFF          0x8
  11 #define L2CC_PROT_OFF           0xC
  12 #define L2CC_CTRL_OFF           0x10
  13 #define L2_INT_EN_OFF           0x20
  14 #define L2_STA_OFF              0x24
  15 #define RDERR_ADDR_OFF          0x28
  16 #define WRERR_ADDR_OFF          0x2c
  17 #define EVDPTERR_ADDR_OFF       0x30
  18 #define IMPL3ERR_ADDR_OFF       0x34
  19 #define L2_CNT0_CTRL_OFF        0x40
  20 #define L2_EVNT_CNT0_OFF        0x44
  21 #define L2_CNT1_CTRL_OFF        0x48
  22 #define L2_EVNT_CNT1_OFF        0x4c
  23 #define L2_CCTL_CMD_OFF         0x60
  24 #define L2_CCTL_STATUS_OFF      0x64
  25 #define L2_LINE_TAG_OFF         0x68
  26 #define L2_LINE_DPT_OFF         0x70
  27
  28 #define CCTL_CMD_L2_IX_INVAL    0x0
  29 #define CCTL_CMD_L2_PA_INVAL    0x1
  30 #define CCTL_CMD_L2_IX_WB       0x2
  31 #define CCTL_CMD_L2_PA_WB       0x3
  32 #define CCTL_CMD_L2_PA_WBINVAL  0x5
  33 #define CCTL_CMD_L2_SYNC        0xa
  34
  35 /* CCTL_CMD_TYPE */
  36 #define CCTL_SINGLE_CMD         0
  37 #define CCTL_BLOCK_CMD          0x10
  38 #define CCTL_ALL_CMD            0x10
  39
  40 /******************************************************************************
  41  * L2_CA_CONF (Cache architecture configuration)
  42  *****************************************************************************/
  43 #define L2_CA_CONF_offL2SET             0
  44 #define L2_CA_CONF_offL2WAY             4
  45 #define L2_CA_CONF_offL2CLSZ            8
  46 #define L2_CA_CONF_offL2DW              11
  47 #define L2_CA_CONF_offL2PT              14
  48 #define L2_CA_CONF_offL2VER             16
  49
  50 #define L2_CA_CONF_mskL2SET     (0xFUL << L2_CA_CONF_offL2SET)
  51 #define L2_CA_CONF_mskL2WAY     (0xFUL << L2_CA_CONF_offL2WAY)
  52 #define L2_CA_CONF_mskL2CLSZ    (0x7UL << L2_CA_CONF_offL2CLSZ)
  53 #define L2_CA_CONF_mskL2DW      (0x7UL << L2_CA_CONF_offL2DW)
  54 #define L2_CA_CONF_mskL2PT      (0x3UL << L2_CA_CONF_offL2PT)
  55 #define L2_CA_CONF_mskL2VER     (0xFFFFUL << L2_CA_CONF_offL2VER)
  56
  57 /******************************************************************************
  58  * L2CC_SETUP (L2CC Setup register)
  59  *****************************************************************************/
  60 #define L2CC_SETUP_offPART              0
  61 #define L2CC_SETUP_mskPART              (0x3UL << L2CC_SETUP_offPART)
  62 #define L2CC_SETUP_offDDLATC            4
  63 #define L2CC_SETUP_mskDDLATC            (0x3UL << L2CC_SETUP_offDDLATC)
  64 #define L2CC_SETUP_offTDLATC            8
  65 #define L2CC_SETUP_mskTDLATC            (0x3UL << L2CC_SETUP_offTDLATC)
  66
  67 /******************************************************************************
  68  * L2CC_PROT (L2CC Protect register)
  69  *****************************************************************************/
  70 #define L2CC_PROT_offMRWEN              31
  71 #define L2CC_PROT_mskMRWEN      (0x1UL << L2CC_PROT_offMRWEN)
  72
  73 /******************************************************************************
  74  * L2_CCTL_STATUS_Mn (The L2CCTL command working status for Master n)
  75  *****************************************************************************/
  76 #define L2CC_CTRL_offEN                 31
  77 #define L2CC_CTRL_mskEN                 (0x1UL << L2CC_CTRL_offEN)
  78
  79 /******************************************************************************
  80  * L2_CCTL_STATUS_Mn (The L2CCTL command working status for Master n)
  81  *****************************************************************************/
  82 #define L2_CCTL_STATUS_offCMD_COMP      31
  83 #define L2_CCTL_STATUS_mskCMD_COMP      (0x1 << L2_CCTL_STATUS_offCMD_COMP)
  84
  85 extern void __iomem *atl2c_base;
  86 #include <linux/smp.h>
  87 #include <asm/io.h>
  88 #include <asm/bitfield.h>
  89
  90 #define L2C_R_REG(offset)               readl(atl2c_base + offset)
  91 #define L2C_W_REG(offset, value)        writel(value, atl2c_base + offset)
  92
  93 #define L2_CMD_RDY()    \
  94         do{;}while((L2C_R_REG(L2_CCTL_STATUS_OFF) & L2_CCTL_STATUS_mskCMD_COMP) == 0)
  95
  96 static inline unsigned long L2_CACHE_SET(void)
  97 {
  98         return 64 << ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2SET) >>
  99                       L2_CA_CONF_offL2SET);
 100 }
 101
 102 static inline unsigned long L2_CACHE_WAY(void)
 103 {
 104         return 1 +
 105             ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2WAY) >>
 106              L2_CA_CONF_offL2WAY);
 107 }
 108
 109 static inline unsigned long L2_CACHE_LINE_SIZE(void)
 110 {
 111
 112         return 4 << ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2CLSZ) >>
 113                      L2_CA_CONF_offL2CLSZ);
 114 }
 115
 116 static inline unsigned long GET_L2CC_CTRL_CPU(unsigned long cpu)
 117 {
 118         if (cpu == smp_processor_id())
 119                 return L2C_R_REG(L2CC_CTRL_OFF);
 120         return L2C_R_REG(L2CC_CTRL_OFF + (cpu << 8));
 121 }
 122
 123 static inline void SET_L2CC_CTRL_CPU(unsigned long cpu, unsigned long val)
 124 {
 125         if (cpu == smp_processor_id())
 126                 L2C_W_REG(L2CC_CTRL_OFF, val);
 127         else
 128                 L2C_W_REG(L2CC_CTRL_OFF + (cpu << 8), val);
 129 }
 130
 131 static inline unsigned long GET_L2CC_STATUS_CPU(unsigned long cpu)
 132 {
 133         if (cpu == smp_processor_id())
 134                 return L2C_R_REG(L2_CCTL_STATUS_OFF);
 135         return L2C_R_REG(L2_CCTL_STATUS_OFF + (cpu << 8));
 136 }
 137 #endif