perf tools: Don't clone maps from parent when synthesizing forks
[linux/fpc-iii.git] / drivers / media / i2c / ov9650.c
blob5bea31cd41aa1e63b3e024e0ce9d55624d633b7e
1 /*
2 * Omnivision OV9650/OV9652 CMOS Image Sensor driver
4 * Copyright (C) 2013, Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
6 * Register definitions and initial settings based on a driver written
7 * by Vladimir Fonov.
8 * Copyright (c) 2010, Vladimir Fonov
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/clk.h>
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/gpio/consumer.h>
18 #include <linux/i2c.h>
19 #include <linux/kernel.h>
20 #include <linux/media.h>
21 #include <linux/module.h>
22 #include <linux/ratelimit.h>
23 #include <linux/slab.h>
24 #include <linux/string.h>
25 #include <linux/videodev2.h>
27 #include <media/media-entity.h>
28 #include <media/v4l2-async.h>
29 #include <media/v4l2-ctrls.h>
30 #include <media/v4l2-device.h>
31 #include <media/v4l2-event.h>
32 #include <media/v4l2-image-sizes.h>
33 #include <media/v4l2-subdev.h>
34 #include <media/v4l2-mediabus.h>
35 #include <media/i2c/ov9650.h>
37 static int debug;
38 module_param(debug, int, 0644);
39 MODULE_PARM_DESC(debug, "Debug level (0-2)");
41 #define DRIVER_NAME "OV9650"
44 * OV9650/OV9652 register definitions
46 #define REG_GAIN 0x00 /* Gain control, AGC[7:0] */
47 #define REG_BLUE 0x01 /* AWB - Blue chanel gain */
48 #define REG_RED 0x02 /* AWB - Red chanel gain */
49 #define REG_VREF 0x03 /* [7:6] - AGC[9:8], [5:3]/[2:0] */
50 #define VREF_GAIN_MASK 0xc0 /* - VREF end/start low 3 bits */
51 #define REG_COM1 0x04
52 #define COM1_CCIR656 0x40
53 #define REG_B_AVE 0x05
54 #define REG_GB_AVE 0x06
55 #define REG_GR_AVE 0x07
56 #define REG_R_AVE 0x08
57 #define REG_COM2 0x09
58 #define REG_PID 0x0a /* Product ID MSB */
59 #define REG_VER 0x0b /* Product ID LSB */
60 #define REG_COM3 0x0c
61 #define COM3_SWAP 0x40
62 #define COM3_VARIOPIXEL1 0x04
63 #define REG_COM4 0x0d /* Vario Pixels */
64 #define COM4_VARIOPIXEL2 0x80
65 #define REG_COM5 0x0e /* System clock options */
66 #define COM5_SLAVE_MODE 0x10
67 #define COM5_SYSTEMCLOCK48MHZ 0x80
68 #define REG_COM6 0x0f /* HREF & ADBLC options */
69 #define REG_AECH 0x10 /* Exposure value, AEC[9:2] */
70 #define REG_CLKRC 0x11 /* Clock control */
71 #define CLK_EXT 0x40 /* Use external clock directly */
72 #define CLK_SCALE 0x3f /* Mask for internal clock scale */
73 #define REG_COM7 0x12 /* SCCB reset, output format */
74 #define COM7_RESET 0x80
75 #define COM7_FMT_MASK 0x38
76 #define COM7_FMT_VGA 0x40
77 #define COM7_FMT_CIF 0x20
78 #define COM7_FMT_QVGA 0x10
79 #define COM7_FMT_QCIF 0x08
80 #define COM7_RGB 0x04
81 #define COM7_YUV 0x00
82 #define COM7_BAYER 0x01
83 #define COM7_PBAYER 0x05
84 #define REG_COM8 0x13 /* AGC/AEC options */
85 #define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */
86 #define COM8_AECSTEP 0x40 /* Unlimited AEC step size */
87 #define COM8_BFILT 0x20 /* Band filter enable */
88 #define COM8_AGC 0x04 /* Auto gain enable */
89 #define COM8_AWB 0x02 /* White balance enable */
90 #define COM8_AEC 0x01 /* Auto exposure enable */
91 #define REG_COM9 0x14 /* Gain ceiling */
92 #define COM9_GAIN_CEIL_MASK 0x70 /* */
93 #define REG_COM10 0x15 /* PCLK, HREF, HSYNC signals polarity */
94 #define COM10_HSYNC 0x40 /* HSYNC instead of HREF */
95 #define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */
96 #define COM10_HREF_REV 0x08 /* Reverse HREF */
97 #define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */
98 #define COM10_VS_NEG 0x02 /* VSYNC negative */
99 #define COM10_HS_NEG 0x01 /* HSYNC negative */
100 #define REG_HSTART 0x17 /* Horiz start high bits */
101 #define REG_HSTOP 0x18 /* Horiz stop high bits */
102 #define REG_VSTART 0x19 /* Vert start high bits */
103 #define REG_VSTOP 0x1a /* Vert stop high bits */
104 #define REG_PSHFT 0x1b /* Pixel delay after HREF */
105 #define REG_MIDH 0x1c /* Manufacturer ID MSB */
106 #define REG_MIDL 0x1d /* Manufufacturer ID LSB */
107 #define REG_MVFP 0x1e /* Image mirror/flip */
108 #define MVFP_MIRROR 0x20 /* Mirror image */
109 #define MVFP_FLIP 0x10 /* Vertical flip */
110 #define REG_BOS 0x20 /* B channel Offset */
111 #define REG_GBOS 0x21 /* Gb channel Offset */
112 #define REG_GROS 0x22 /* Gr channel Offset */
113 #define REG_ROS 0x23 /* R channel Offset */
114 #define REG_AEW 0x24 /* AGC upper limit */
115 #define REG_AEB 0x25 /* AGC lower limit */
116 #define REG_VPT 0x26 /* AGC/AEC fast mode op region */
117 #define REG_BBIAS 0x27 /* B channel output bias */
118 #define REG_GBBIAS 0x28 /* Gb channel output bias */
119 #define REG_GRCOM 0x29 /* Analog BLC & regulator */
120 #define REG_EXHCH 0x2a /* Dummy pixel insert MSB */
121 #define REG_EXHCL 0x2b /* Dummy pixel insert LSB */
122 #define REG_RBIAS 0x2c /* R channel output bias */
123 #define REG_ADVFL 0x2d /* LSB of dummy line insert */
124 #define REG_ADVFH 0x2e /* MSB of dummy line insert */
125 #define REG_YAVE 0x2f /* Y/G channel average value */
126 #define REG_HSYST 0x30 /* HSYNC rising edge delay LSB*/
127 #define REG_HSYEN 0x31 /* HSYNC falling edge delay LSB*/
128 #define REG_HREF 0x32 /* HREF pieces */
129 #define REG_CHLF 0x33 /* reserved */
130 #define REG_ADC 0x37 /* reserved */
131 #define REG_ACOM 0x38 /* reserved */
132 #define REG_OFON 0x39 /* Power down register */
133 #define OFON_PWRDN 0x08 /* Power down bit */
134 #define REG_TSLB 0x3a /* YUVU format */
135 #define TSLB_YUYV_MASK 0x0c /* UYVY or VYUY - see com13 */
136 #define REG_COM11 0x3b /* Night mode, banding filter enable */
137 #define COM11_NIGHT 0x80 /* Night mode enable */
138 #define COM11_NMFR 0x60 /* Two bit NM frame rate */
139 #define COM11_BANDING 0x01 /* Banding filter */
140 #define COM11_AEC_REF_MASK 0x18 /* AEC reference area selection */
141 #define REG_COM12 0x3c /* HREF option, UV average */
142 #define COM12_HREF 0x80 /* HREF always */
143 #define REG_COM13 0x3d /* Gamma selection, Color matrix en. */
144 #define COM13_GAMMA 0x80 /* Gamma enable */
145 #define COM13_UVSAT 0x40 /* UV saturation auto adjustment */
146 #define COM13_UVSWAP 0x01 /* V before U - w/TSLB */
147 #define REG_COM14 0x3e /* Edge enhancement options */
148 #define COM14_EDGE_EN 0x02
149 #define COM14_EEF_X2 0x01
150 #define REG_EDGE 0x3f /* Edge enhancement factor */
151 #define EDGE_FACTOR_MASK 0x0f
152 #define REG_COM15 0x40 /* Output range, RGB 555/565 */
153 #define COM15_R10F0 0x00 /* Data range 10 to F0 */
154 #define COM15_R01FE 0x80 /* 01 to FE */
155 #define COM15_R00FF 0xc0 /* 00 to FF */
156 #define COM15_RGB565 0x10 /* RGB565 output */
157 #define COM15_RGB555 0x30 /* RGB555 output */
158 #define COM15_SWAPRB 0x04 /* Swap R&B */
159 #define REG_COM16 0x41 /* Color matrix coeff options */
160 #define REG_COM17 0x42 /* Single frame out, banding filter */
161 /* n = 1...9, 0x4f..0x57 */
162 #define REG_MTX(__n) (0x4f + (__n) - 1)
163 #define REG_MTXS 0x58
164 /* Lens Correction Option 1...5, __n = 0...5 */
165 #define REG_LCC(__n) (0x62 + (__n) - 1)
166 #define LCC5_LCC_ENABLE 0x01 /* LCC5, enable lens correction */
167 #define LCC5_LCC_COLOR 0x04
168 #define REG_MANU 0x67 /* Manual U value */
169 #define REG_MANV 0x68 /* Manual V value */
170 #define REG_HV 0x69 /* Manual banding filter MSB */
171 #define REG_MBD 0x6a /* Manual banding filter value */
172 #define REG_DBLV 0x6b /* reserved */
173 #define REG_GSP 0x6c /* Gamma curve */
174 #define GSP_LEN 15
175 #define REG_GST 0x7c /* Gamma curve */
176 #define GST_LEN 15
177 #define REG_COM21 0x8b
178 #define REG_COM22 0x8c /* Edge enhancement, denoising */
179 #define COM22_WHTPCOR 0x02 /* White pixel correction enable */
180 #define COM22_WHTPCOROPT 0x01 /* White pixel correction option */
181 #define COM22_DENOISE 0x10 /* White pixel correction option */
182 #define REG_COM23 0x8d /* Color bar test, color gain */
183 #define COM23_TEST_MODE 0x10
184 #define REG_DBLC1 0x8f /* Digital BLC */
185 #define REG_DBLC_B 0x90 /* Digital BLC B channel offset */
186 #define REG_DBLC_R 0x91 /* Digital BLC R channel offset */
187 #define REG_DM_LNL 0x92 /* Dummy line low 8 bits */
188 #define REG_DM_LNH 0x93 /* Dummy line high 8 bits */
189 #define REG_LCCFB 0x9d /* Lens Correction B channel */
190 #define REG_LCCFR 0x9e /* Lens Correction R channel */
191 #define REG_DBLC_GB 0x9f /* Digital BLC GB chan offset */
192 #define REG_DBLC_GR 0xa0 /* Digital BLC GR chan offset */
193 #define REG_AECHM 0xa1 /* Exposure value - bits AEC[15:10] */
194 #define REG_BD50ST 0xa2 /* Banding filter value for 50Hz */
195 #define REG_BD60ST 0xa3 /* Banding filter value for 60Hz */
196 #define REG_NULL 0xff /* Array end token */
198 #define DEF_CLKRC 0x80
200 #define OV965X_ID(_msb, _lsb) ((_msb) << 8 | (_lsb))
201 #define OV9650_ID 0x9650
202 #define OV9652_ID 0x9652
204 struct ov965x_ctrls {
205 struct v4l2_ctrl_handler handler;
206 struct {
207 struct v4l2_ctrl *auto_exp;
208 struct v4l2_ctrl *exposure;
210 struct {
211 struct v4l2_ctrl *auto_wb;
212 struct v4l2_ctrl *blue_balance;
213 struct v4l2_ctrl *red_balance;
215 struct {
216 struct v4l2_ctrl *hflip;
217 struct v4l2_ctrl *vflip;
219 struct {
220 struct v4l2_ctrl *auto_gain;
221 struct v4l2_ctrl *gain;
223 struct v4l2_ctrl *brightness;
224 struct v4l2_ctrl *saturation;
225 struct v4l2_ctrl *sharpness;
226 struct v4l2_ctrl *light_freq;
227 u8 update;
230 struct ov965x_framesize {
231 u16 width;
232 u16 height;
233 u16 max_exp_lines;
234 const u8 *regs;
237 struct ov965x_interval {
238 struct v4l2_fract interval;
239 /* Maximum resolution for this interval */
240 struct v4l2_frmsize_discrete size;
241 u8 clkrc_div;
244 enum gpio_id {
245 GPIO_PWDN,
246 GPIO_RST,
247 NUM_GPIOS,
250 struct ov965x {
251 struct v4l2_subdev sd;
252 struct media_pad pad;
253 enum v4l2_mbus_type bus_type;
254 struct gpio_desc *gpios[NUM_GPIOS];
255 /* External master clock frequency */
256 unsigned long mclk_frequency;
257 struct clk *clk;
259 /* Protects the struct fields below */
260 struct mutex lock;
262 struct i2c_client *client;
264 /* Exposure row interval in us */
265 unsigned int exp_row_interval;
267 unsigned short id;
268 const struct ov965x_framesize *frame_size;
269 /* YUYV sequence (pixel format) control register */
270 u8 tslb_reg;
271 struct v4l2_mbus_framefmt format;
273 struct ov965x_ctrls ctrls;
274 /* Pointer to frame rate control data structure */
275 const struct ov965x_interval *fiv;
277 int streaming;
278 int power;
280 u8 apply_frame_fmt;
283 struct i2c_rv {
284 u8 addr;
285 u8 value;
288 static const struct i2c_rv ov965x_init_regs[] = {
289 { REG_COM2, 0x10 }, /* Set soft sleep mode */
290 { REG_COM5, 0x00 }, /* System clock options */
291 { REG_COM2, 0x01 }, /* Output drive, soft sleep mode */
292 { REG_COM10, 0x00 }, /* Slave mode, HREF vs HSYNC, signals negate */
293 { REG_EDGE, 0xa6 }, /* Edge enhancement treshhold and factor */
294 { REG_COM16, 0x02 }, /* Color matrix coeff double option */
295 { REG_COM17, 0x08 }, /* Single frame out, banding filter */
296 { 0x16, 0x06 },
297 { REG_CHLF, 0xc0 }, /* Reserved */
298 { 0x34, 0xbf },
299 { 0xa8, 0x80 },
300 { 0x96, 0x04 },
301 { 0x8e, 0x00 },
302 { REG_COM12, 0x77 }, /* HREF option, UV average */
303 { 0x8b, 0x06 },
304 { 0x35, 0x91 },
305 { 0x94, 0x88 },
306 { 0x95, 0x88 },
307 { REG_COM15, 0xc1 }, /* Output range, RGB 555/565 */
308 { REG_GRCOM, 0x2f }, /* Analog BLC & regulator */
309 { REG_COM6, 0x43 }, /* HREF & ADBLC options */
310 { REG_COM8, 0xe5 }, /* AGC/AEC options */
311 { REG_COM13, 0x90 }, /* Gamma selection, colour matrix, UV delay */
312 { REG_HV, 0x80 }, /* Manual banding filter MSB */
313 { 0x5c, 0x96 }, /* Reserved up to 0xa5 */
314 { 0x5d, 0x96 },
315 { 0x5e, 0x10 },
316 { 0x59, 0xeb },
317 { 0x5a, 0x9c },
318 { 0x5b, 0x55 },
319 { 0x43, 0xf0 },
320 { 0x44, 0x10 },
321 { 0x45, 0x55 },
322 { 0x46, 0x86 },
323 { 0x47, 0x64 },
324 { 0x48, 0x86 },
325 { 0x5f, 0xe0 },
326 { 0x60, 0x8c },
327 { 0x61, 0x20 },
328 { 0xa5, 0xd9 },
329 { 0xa4, 0x74 }, /* reserved */
330 { REG_COM23, 0x02 }, /* Color gain analog/_digital_ */
331 { REG_COM8, 0xe7 }, /* Enable AEC, AWB, AEC */
332 { REG_COM22, 0x23 }, /* Edge enhancement, denoising */
333 { 0xa9, 0xb8 },
334 { 0xaa, 0x92 },
335 { 0xab, 0x0a },
336 { REG_DBLC1, 0xdf }, /* Digital BLC */
337 { REG_DBLC_B, 0x00 }, /* Digital BLC B chan offset */
338 { REG_DBLC_R, 0x00 }, /* Digital BLC R chan offset */
339 { REG_DBLC_GB, 0x00 }, /* Digital BLC GB chan offset */
340 { REG_DBLC_GR, 0x00 },
341 { REG_COM9, 0x3a }, /* Gain ceiling 16x */
342 { REG_NULL, 0 }
345 #define NUM_FMT_REGS 14
347 * COM7, COM3, COM4, HSTART, HSTOP, HREF, VSTART, VSTOP, VREF,
348 * EXHCH, EXHCL, ADC, OCOM, OFON
350 static const u8 frame_size_reg_addr[NUM_FMT_REGS] = {
351 0x12, 0x0c, 0x0d, 0x17, 0x18, 0x32, 0x19, 0x1a, 0x03,
352 0x2a, 0x2b, 0x37, 0x38, 0x39,
355 static const u8 ov965x_sxga_regs[NUM_FMT_REGS] = {
356 0x00, 0x00, 0x00, 0x1e, 0xbe, 0xbf, 0x01, 0x81, 0x12,
357 0x10, 0x34, 0x81, 0x93, 0x51,
360 static const u8 ov965x_vga_regs[NUM_FMT_REGS] = {
361 0x40, 0x04, 0x80, 0x26, 0xc6, 0xed, 0x01, 0x3d, 0x00,
362 0x10, 0x40, 0x91, 0x12, 0x43,
365 /* Determined empirically. */
366 static const u8 ov965x_qvga_regs[NUM_FMT_REGS] = {
367 0x10, 0x04, 0x80, 0x25, 0xc5, 0xbf, 0x00, 0x80, 0x12,
368 0x10, 0x40, 0x91, 0x12, 0x43,
371 static const struct ov965x_framesize ov965x_framesizes[] = {
373 .width = SXGA_WIDTH,
374 .height = SXGA_HEIGHT,
375 .regs = ov965x_sxga_regs,
376 .max_exp_lines = 1048,
377 }, {
378 .width = VGA_WIDTH,
379 .height = VGA_HEIGHT,
380 .regs = ov965x_vga_regs,
381 .max_exp_lines = 498,
382 }, {
383 .width = QVGA_WIDTH,
384 .height = QVGA_HEIGHT,
385 .regs = ov965x_qvga_regs,
386 .max_exp_lines = 248,
390 struct ov965x_pixfmt {
391 u32 code;
392 u32 colorspace;
393 /* REG_TSLB value, only bits [3:2] may be set. */
394 u8 tslb_reg;
397 static const struct ov965x_pixfmt ov965x_formats[] = {
398 { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 0x00},
399 { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG, 0x04},
400 { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG, 0x0c},
401 { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG, 0x08},
405 * This table specifies possible frame resolution and interval
406 * combinations. Default CLKRC[5:0] divider values are valid
407 * only for 24 MHz external clock frequency.
409 static struct ov965x_interval ov965x_intervals[] = {
410 {{ 100, 625 }, { SXGA_WIDTH, SXGA_HEIGHT }, 0 }, /* 6.25 fps */
411 {{ 10, 125 }, { VGA_WIDTH, VGA_HEIGHT }, 1 }, /* 12.5 fps */
412 {{ 10, 125 }, { QVGA_WIDTH, QVGA_HEIGHT }, 3 }, /* 12.5 fps */
413 {{ 1, 25 }, { VGA_WIDTH, VGA_HEIGHT }, 0 }, /* 25 fps */
414 {{ 1, 25 }, { QVGA_WIDTH, QVGA_HEIGHT }, 1 }, /* 25 fps */
417 static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
419 return &container_of(ctrl->handler, struct ov965x, ctrls.handler)->sd;
422 static inline struct ov965x *to_ov965x(struct v4l2_subdev *sd)
424 return container_of(sd, struct ov965x, sd);
427 static int ov965x_read(struct i2c_client *client, u8 addr, u8 *val)
429 u8 buf = addr;
430 struct i2c_msg msg = {
431 .addr = client->addr,
432 .flags = 0,
433 .len = 1,
434 .buf = &buf
436 int ret;
438 ret = i2c_transfer(client->adapter, &msg, 1);
439 if (ret == 1) {
440 msg.flags = I2C_M_RD;
441 ret = i2c_transfer(client->adapter, &msg, 1);
443 if (ret == 1)
444 *val = buf;
447 v4l2_dbg(2, debug, client, "%s: 0x%02x @ 0x%02x. (%d)\n",
448 __func__, *val, addr, ret);
450 return ret == 1 ? 0 : ret;
453 static int ov965x_write(struct i2c_client *client, u8 addr, u8 val)
455 u8 buf[2] = { addr, val };
457 int ret = i2c_master_send(client, buf, 2);
459 v4l2_dbg(2, debug, client, "%s: 0x%02x @ 0x%02X (%d)\n",
460 __func__, val, addr, ret);
462 return ret == 2 ? 0 : ret;
465 static int ov965x_write_array(struct i2c_client *client,
466 const struct i2c_rv *regs)
468 int i, ret = 0;
470 for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
471 ret = ov965x_write(client, regs[i].addr, regs[i].value);
473 return ret;
476 static int ov965x_set_default_gamma_curve(struct ov965x *ov965x)
478 static const u8 gamma_curve[] = {
479 /* Values taken from OV application note. */
480 0x40, 0x30, 0x4b, 0x60, 0x70, 0x70, 0x70, 0x70,
481 0x60, 0x60, 0x50, 0x48, 0x3a, 0x2e, 0x28, 0x22,
482 0x04, 0x07, 0x10, 0x28, 0x36, 0x44, 0x52, 0x60,
483 0x6c, 0x78, 0x8c, 0x9e, 0xbb, 0xd2, 0xe6
485 u8 addr = REG_GSP;
486 unsigned int i;
488 for (i = 0; i < ARRAY_SIZE(gamma_curve); i++) {
489 int ret = ov965x_write(ov965x->client, addr, gamma_curve[i]);
491 if (ret < 0)
492 return ret;
493 addr++;
496 return 0;
499 static int ov965x_set_color_matrix(struct ov965x *ov965x)
501 static const u8 mtx[] = {
502 /* MTX1..MTX9, MTXS */
503 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38, 0x40, 0x40, 0x40, 0x0d
505 u8 addr = REG_MTX(1);
506 unsigned int i;
508 for (i = 0; i < ARRAY_SIZE(mtx); i++) {
509 int ret = ov965x_write(ov965x->client, addr, mtx[i]);
511 if (ret < 0)
512 return ret;
513 addr++;
516 return 0;
519 static int __ov965x_set_power(struct ov965x *ov965x, int on)
521 if (on) {
522 int ret = clk_prepare_enable(ov965x->clk);
524 if (ret)
525 return ret;
527 gpiod_set_value_cansleep(ov965x->gpios[GPIO_PWDN], 0);
528 gpiod_set_value_cansleep(ov965x->gpios[GPIO_RST], 0);
529 msleep(25);
530 } else {
531 gpiod_set_value_cansleep(ov965x->gpios[GPIO_RST], 1);
532 gpiod_set_value_cansleep(ov965x->gpios[GPIO_PWDN], 1);
534 clk_disable_unprepare(ov965x->clk);
537 ov965x->streaming = 0;
539 return 0;
542 static int ov965x_s_power(struct v4l2_subdev *sd, int on)
544 struct ov965x *ov965x = to_ov965x(sd);
545 struct i2c_client *client = ov965x->client;
546 int ret = 0;
548 v4l2_dbg(1, debug, client, "%s: on: %d\n", __func__, on);
550 mutex_lock(&ov965x->lock);
551 if (ov965x->power == !on) {
552 ret = __ov965x_set_power(ov965x, on);
553 if (!ret && on) {
554 ret = ov965x_write_array(client,
555 ov965x_init_regs);
556 ov965x->apply_frame_fmt = 1;
557 ov965x->ctrls.update = 1;
560 if (!ret)
561 ov965x->power += on ? 1 : -1;
563 WARN_ON(ov965x->power < 0);
564 mutex_unlock(&ov965x->lock);
565 return ret;
569 * V4L2 controls
572 static void ov965x_update_exposure_ctrl(struct ov965x *ov965x)
574 struct v4l2_ctrl *ctrl = ov965x->ctrls.exposure;
575 unsigned long fint, trow;
576 int min, max, def;
577 u8 clkrc;
579 mutex_lock(&ov965x->lock);
580 if (WARN_ON(!ctrl || !ov965x->frame_size)) {
581 mutex_unlock(&ov965x->lock);
582 return;
584 clkrc = DEF_CLKRC + ov965x->fiv->clkrc_div;
585 /* Calculate internal clock frequency */
586 fint = ov965x->mclk_frequency * ((clkrc >> 7) + 1) /
587 ((2 * ((clkrc & 0x3f) + 1)));
588 /* and the row interval (in us). */
589 trow = (2 * 1520 * 1000000UL) / fint;
590 max = ov965x->frame_size->max_exp_lines * trow;
591 ov965x->exp_row_interval = trow;
592 mutex_unlock(&ov965x->lock);
594 v4l2_dbg(1, debug, &ov965x->sd, "clkrc: %#x, fi: %lu, tr: %lu, %d\n",
595 clkrc, fint, trow, max);
597 /* Update exposure time range to match current frame format. */
598 min = (trow + 100) / 100;
599 max = (max - 100) / 100;
600 def = min + (max - min) / 2;
602 if (v4l2_ctrl_modify_range(ctrl, min, max, 1, def))
603 v4l2_err(&ov965x->sd, "Exposure ctrl range update failed\n");
606 static int ov965x_set_banding_filter(struct ov965x *ov965x, int value)
608 unsigned long mbd, light_freq;
609 int ret;
610 u8 reg;
612 ret = ov965x_read(ov965x->client, REG_COM8, &reg);
613 if (!ret) {
614 if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED)
615 reg &= ~COM8_BFILT;
616 else
617 reg |= COM8_BFILT;
618 ret = ov965x_write(ov965x->client, REG_COM8, reg);
620 if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED)
621 return 0;
622 if (WARN_ON(!ov965x->fiv))
623 return -EINVAL;
624 /* Set minimal exposure time for 50/60 HZ lighting */
625 if (value == V4L2_CID_POWER_LINE_FREQUENCY_50HZ)
626 light_freq = 50;
627 else
628 light_freq = 60;
629 mbd = (1000UL * ov965x->fiv->interval.denominator *
630 ov965x->frame_size->max_exp_lines) /
631 ov965x->fiv->interval.numerator;
632 mbd = ((mbd / (light_freq * 2)) + 500) / 1000UL;
634 return ov965x_write(ov965x->client, REG_MBD, mbd);
637 static int ov965x_set_white_balance(struct ov965x *ov965x, int awb)
639 int ret;
640 u8 reg;
642 ret = ov965x_read(ov965x->client, REG_COM8, &reg);
643 if (!ret) {
644 reg = awb ? reg | REG_COM8 : reg & ~REG_COM8;
645 ret = ov965x_write(ov965x->client, REG_COM8, reg);
647 if (!ret && !awb) {
648 ret = ov965x_write(ov965x->client, REG_BLUE,
649 ov965x->ctrls.blue_balance->val);
650 if (ret < 0)
651 return ret;
652 ret = ov965x_write(ov965x->client, REG_RED,
653 ov965x->ctrls.red_balance->val);
655 return ret;
658 #define NUM_BR_LEVELS 7
659 #define NUM_BR_REGS 3
661 static int ov965x_set_brightness(struct ov965x *ov965x, int val)
663 static const u8 regs[NUM_BR_LEVELS + 1][NUM_BR_REGS] = {
664 { REG_AEW, REG_AEB, REG_VPT },
665 { 0x1c, 0x12, 0x50 }, /* -3 */
666 { 0x3d, 0x30, 0x71 }, /* -2 */
667 { 0x50, 0x44, 0x92 }, /* -1 */
668 { 0x70, 0x64, 0xc3 }, /* 0 */
669 { 0x90, 0x84, 0xd4 }, /* +1 */
670 { 0xc4, 0xbf, 0xf9 }, /* +2 */
671 { 0xd8, 0xd0, 0xfa }, /* +3 */
673 int i, ret = 0;
675 val += (NUM_BR_LEVELS / 2 + 1);
676 if (val > NUM_BR_LEVELS)
677 return -EINVAL;
679 for (i = 0; i < NUM_BR_REGS && !ret; i++)
680 ret = ov965x_write(ov965x->client, regs[0][i],
681 regs[val][i]);
682 return ret;
685 static int ov965x_set_gain(struct ov965x *ov965x, int auto_gain)
687 struct i2c_client *client = ov965x->client;
688 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
689 int ret = 0;
690 u8 reg;
692 * For manual mode we need to disable AGC first, so
693 * gain value in REG_VREF, REG_GAIN is not overwritten.
695 if (ctrls->auto_gain->is_new) {
696 ret = ov965x_read(client, REG_COM8, &reg);
697 if (ret < 0)
698 return ret;
699 if (ctrls->auto_gain->val)
700 reg |= COM8_AGC;
701 else
702 reg &= ~COM8_AGC;
703 ret = ov965x_write(client, REG_COM8, reg);
704 if (ret < 0)
705 return ret;
708 if (ctrls->gain->is_new && !auto_gain) {
709 unsigned int gain = ctrls->gain->val;
710 unsigned int rgain;
711 int m;
713 * Convert gain control value to the sensor's gain
714 * registers (VREF[7:6], GAIN[7:0]) format.
716 for (m = 6; m >= 0; m--)
717 if (gain >= (1 << m) * 16)
718 break;
719 rgain = (gain - ((1 << m) * 16)) / (1 << m);
720 rgain |= (((1 << m) - 1) << 4);
722 ret = ov965x_write(client, REG_GAIN, rgain & 0xff);
723 if (ret < 0)
724 return ret;
725 ret = ov965x_read(client, REG_VREF, &reg);
726 if (ret < 0)
727 return ret;
728 reg &= ~VREF_GAIN_MASK;
729 reg |= (((rgain >> 8) & 0x3) << 6);
730 ret = ov965x_write(client, REG_VREF, reg);
731 if (ret < 0)
732 return ret;
733 /* Return updated control's value to userspace */
734 ctrls->gain->val = (1 << m) * (16 + (rgain & 0xf));
737 return ret;
740 static int ov965x_set_sharpness(struct ov965x *ov965x, unsigned int value)
742 u8 com14, edge;
743 int ret;
745 ret = ov965x_read(ov965x->client, REG_COM14, &com14);
746 if (ret < 0)
747 return ret;
748 ret = ov965x_read(ov965x->client, REG_EDGE, &edge);
749 if (ret < 0)
750 return ret;
751 com14 = value ? com14 | COM14_EDGE_EN : com14 & ~COM14_EDGE_EN;
752 value--;
753 if (value > 0x0f) {
754 com14 |= COM14_EEF_X2;
755 value >>= 1;
756 } else {
757 com14 &= ~COM14_EEF_X2;
759 ret = ov965x_write(ov965x->client, REG_COM14, com14);
760 if (ret < 0)
761 return ret;
763 edge &= ~EDGE_FACTOR_MASK;
764 edge |= ((u8)value & 0x0f);
766 return ov965x_write(ov965x->client, REG_EDGE, edge);
769 static int ov965x_set_exposure(struct ov965x *ov965x, int exp)
771 struct i2c_client *client = ov965x->client;
772 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
773 bool auto_exposure = (exp == V4L2_EXPOSURE_AUTO);
774 int ret;
775 u8 reg;
777 if (ctrls->auto_exp->is_new) {
778 ret = ov965x_read(client, REG_COM8, &reg);
779 if (ret < 0)
780 return ret;
781 if (auto_exposure)
782 reg |= (COM8_AEC | COM8_AGC);
783 else
784 reg &= ~(COM8_AEC | COM8_AGC);
785 ret = ov965x_write(client, REG_COM8, reg);
786 if (ret < 0)
787 return ret;
790 if (!auto_exposure && ctrls->exposure->is_new) {
791 unsigned int exposure = (ctrls->exposure->val * 100)
792 / ov965x->exp_row_interval;
794 * Manual exposure value
795 * [b15:b0] - AECHM (b15:b10), AECH (b9:b2), COM1 (b1:b0)
797 ret = ov965x_write(client, REG_COM1, exposure & 0x3);
798 if (!ret)
799 ret = ov965x_write(client, REG_AECH,
800 (exposure >> 2) & 0xff);
801 if (!ret)
802 ret = ov965x_write(client, REG_AECHM,
803 (exposure >> 10) & 0x3f);
804 /* Update the value to minimize rounding errors */
805 ctrls->exposure->val = ((exposure * ov965x->exp_row_interval)
806 + 50) / 100;
807 if (ret < 0)
808 return ret;
811 v4l2_ctrl_activate(ov965x->ctrls.brightness, !exp);
812 return 0;
815 static int ov965x_set_flip(struct ov965x *ov965x)
817 u8 mvfp = 0;
819 if (ov965x->ctrls.hflip->val)
820 mvfp |= MVFP_MIRROR;
822 if (ov965x->ctrls.vflip->val)
823 mvfp |= MVFP_FLIP;
825 return ov965x_write(ov965x->client, REG_MVFP, mvfp);
828 #define NUM_SAT_LEVELS 5
829 #define NUM_SAT_REGS 6
831 static int ov965x_set_saturation(struct ov965x *ov965x, int val)
833 static const u8 regs[NUM_SAT_LEVELS][NUM_SAT_REGS] = {
834 /* MTX(1)...MTX(6) */
835 { 0x1d, 0x1f, 0x02, 0x09, 0x13, 0x1c }, /* -2 */
836 { 0x2e, 0x31, 0x02, 0x0e, 0x1e, 0x2d }, /* -1 */
837 { 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38 }, /* 0 */
838 { 0x46, 0x49, 0x04, 0x16, 0x2e, 0x43 }, /* +1 */
839 { 0x57, 0x5c, 0x05, 0x1b, 0x39, 0x54 }, /* +2 */
841 u8 addr = REG_MTX(1);
842 int i, ret = 0;
844 val += (NUM_SAT_LEVELS / 2);
845 if (val >= NUM_SAT_LEVELS)
846 return -EINVAL;
848 for (i = 0; i < NUM_SAT_REGS && !ret; i++)
849 ret = ov965x_write(ov965x->client, addr + i, regs[val][i]);
851 return ret;
854 static int ov965x_set_test_pattern(struct ov965x *ov965x, int value)
856 int ret;
857 u8 reg;
859 ret = ov965x_read(ov965x->client, REG_COM23, &reg);
860 if (ret < 0)
861 return ret;
862 reg = value ? reg | COM23_TEST_MODE : reg & ~COM23_TEST_MODE;
863 return ov965x_write(ov965x->client, REG_COM23, reg);
866 static int __g_volatile_ctrl(struct ov965x *ov965x, struct v4l2_ctrl *ctrl)
868 struct i2c_client *client = ov965x->client;
869 unsigned int exposure, gain, m;
870 u8 reg0, reg1, reg2;
871 int ret;
873 if (!ov965x->power)
874 return 0;
876 switch (ctrl->id) {
877 case V4L2_CID_AUTOGAIN:
878 if (!ctrl->val)
879 return 0;
880 ret = ov965x_read(client, REG_GAIN, &reg0);
881 if (ret < 0)
882 return ret;
883 ret = ov965x_read(client, REG_VREF, &reg1);
884 if (ret < 0)
885 return ret;
886 gain = ((reg1 >> 6) << 8) | reg0;
887 m = 0x01 << fls(gain >> 4);
888 ov965x->ctrls.gain->val = m * (16 + (gain & 0xf));
889 break;
891 case V4L2_CID_EXPOSURE_AUTO:
892 if (ctrl->val == V4L2_EXPOSURE_MANUAL)
893 return 0;
894 ret = ov965x_read(client, REG_COM1, &reg0);
895 if (ret < 0)
896 return ret;
897 ret = ov965x_read(client, REG_AECH, &reg1);
898 if (ret < 0)
899 return ret;
900 ret = ov965x_read(client, REG_AECHM, &reg2);
901 if (ret < 0)
902 return ret;
903 exposure = ((reg2 & 0x3f) << 10) | (reg1 << 2) |
904 (reg0 & 0x3);
905 ov965x->ctrls.exposure->val = ((exposure *
906 ov965x->exp_row_interval) + 50) / 100;
907 break;
910 return 0;
913 static int ov965x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
915 struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
916 struct ov965x *ov965x = to_ov965x(sd);
917 int ret;
919 v4l2_dbg(1, debug, sd, "g_ctrl: %s\n", ctrl->name);
921 mutex_lock(&ov965x->lock);
922 ret = __g_volatile_ctrl(ov965x, ctrl);
923 mutex_unlock(&ov965x->lock);
924 return ret;
927 static int ov965x_s_ctrl(struct v4l2_ctrl *ctrl)
929 struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
930 struct ov965x *ov965x = to_ov965x(sd);
931 int ret = -EINVAL;
933 v4l2_dbg(1, debug, sd, "s_ctrl: %s, value: %d. power: %d\n",
934 ctrl->name, ctrl->val, ov965x->power);
936 mutex_lock(&ov965x->lock);
938 * If the device is not powered up now postpone applying control's
939 * value to the hardware, until it is ready to accept commands.
941 if (ov965x->power == 0) {
942 mutex_unlock(&ov965x->lock);
943 return 0;
946 switch (ctrl->id) {
947 case V4L2_CID_AUTO_WHITE_BALANCE:
948 ret = ov965x_set_white_balance(ov965x, ctrl->val);
949 break;
951 case V4L2_CID_BRIGHTNESS:
952 ret = ov965x_set_brightness(ov965x, ctrl->val);
953 break;
955 case V4L2_CID_EXPOSURE_AUTO:
956 ret = ov965x_set_exposure(ov965x, ctrl->val);
957 break;
959 case V4L2_CID_AUTOGAIN:
960 ret = ov965x_set_gain(ov965x, ctrl->val);
961 break;
963 case V4L2_CID_HFLIP:
964 ret = ov965x_set_flip(ov965x);
965 break;
967 case V4L2_CID_POWER_LINE_FREQUENCY:
968 ret = ov965x_set_banding_filter(ov965x, ctrl->val);
969 break;
971 case V4L2_CID_SATURATION:
972 ret = ov965x_set_saturation(ov965x, ctrl->val);
973 break;
975 case V4L2_CID_SHARPNESS:
976 ret = ov965x_set_sharpness(ov965x, ctrl->val);
977 break;
979 case V4L2_CID_TEST_PATTERN:
980 ret = ov965x_set_test_pattern(ov965x, ctrl->val);
981 break;
984 mutex_unlock(&ov965x->lock);
985 return ret;
988 static const struct v4l2_ctrl_ops ov965x_ctrl_ops = {
989 .g_volatile_ctrl = ov965x_g_volatile_ctrl,
990 .s_ctrl = ov965x_s_ctrl,
993 static const char * const test_pattern_menu[] = {
994 "Disabled",
995 "Color bars",
998 static int ov965x_initialize_controls(struct ov965x *ov965x)
1000 const struct v4l2_ctrl_ops *ops = &ov965x_ctrl_ops;
1001 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
1002 struct v4l2_ctrl_handler *hdl = &ctrls->handler;
1003 int ret;
1005 ret = v4l2_ctrl_handler_init(hdl, 16);
1006 if (ret < 0)
1007 return ret;
1009 /* Auto/manual white balance */
1010 ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
1011 V4L2_CID_AUTO_WHITE_BALANCE,
1012 0, 1, 1, 1);
1013 ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE,
1014 0, 0xff, 1, 0x80);
1015 ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE,
1016 0, 0xff, 1, 0x80);
1017 /* Auto/manual exposure */
1018 ctrls->auto_exp =
1019 v4l2_ctrl_new_std_menu(hdl, ops,
1020 V4L2_CID_EXPOSURE_AUTO,
1021 V4L2_EXPOSURE_MANUAL, 0,
1022 V4L2_EXPOSURE_AUTO);
1023 /* Exposure time, in 100 us units. min/max is updated dynamically. */
1024 ctrls->exposure = v4l2_ctrl_new_std(hdl, ops,
1025 V4L2_CID_EXPOSURE_ABSOLUTE,
1026 2, 1500, 1, 500);
1027 /* Auto/manual gain */
1028 ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
1029 0, 1, 1, 1);
1030 ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
1031 16, 64 * (16 + 15), 1, 64 * 16);
1033 ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
1034 -2, 2, 1, 0);
1035 ctrls->brightness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS,
1036 -3, 3, 1, 0);
1037 ctrls->sharpness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS,
1038 0, 32, 1, 6);
1040 ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
1041 ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
1043 ctrls->light_freq =
1044 v4l2_ctrl_new_std_menu(hdl, ops,
1045 V4L2_CID_POWER_LINE_FREQUENCY,
1046 V4L2_CID_POWER_LINE_FREQUENCY_60HZ, ~0x7,
1047 V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
1049 v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
1050 ARRAY_SIZE(test_pattern_menu) - 1, 0, 0,
1051 test_pattern_menu);
1052 if (hdl->error) {
1053 ret = hdl->error;
1054 v4l2_ctrl_handler_free(hdl);
1055 return ret;
1058 ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
1059 ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
1061 v4l2_ctrl_auto_cluster(3, &ctrls->auto_wb, 0, false);
1062 v4l2_ctrl_auto_cluster(2, &ctrls->auto_gain, 0, true);
1063 v4l2_ctrl_auto_cluster(2, &ctrls->auto_exp, 1, true);
1064 v4l2_ctrl_cluster(2, &ctrls->hflip);
1066 ov965x->sd.ctrl_handler = hdl;
1067 return 0;
1071 * V4L2 subdev video and pad level operations
1073 static void ov965x_get_default_format(struct v4l2_mbus_framefmt *mf)
1075 mf->width = ov965x_framesizes[0].width;
1076 mf->height = ov965x_framesizes[0].height;
1077 mf->colorspace = ov965x_formats[0].colorspace;
1078 mf->code = ov965x_formats[0].code;
1079 mf->field = V4L2_FIELD_NONE;
1082 static int ov965x_enum_mbus_code(struct v4l2_subdev *sd,
1083 struct v4l2_subdev_pad_config *cfg,
1084 struct v4l2_subdev_mbus_code_enum *code)
1086 if (code->index >= ARRAY_SIZE(ov965x_formats))
1087 return -EINVAL;
1089 code->code = ov965x_formats[code->index].code;
1090 return 0;
1093 static int ov965x_enum_frame_sizes(struct v4l2_subdev *sd,
1094 struct v4l2_subdev_pad_config *cfg,
1095 struct v4l2_subdev_frame_size_enum *fse)
1097 int i = ARRAY_SIZE(ov965x_formats);
1099 if (fse->index >= ARRAY_SIZE(ov965x_framesizes))
1100 return -EINVAL;
1102 while (--i)
1103 if (fse->code == ov965x_formats[i].code)
1104 break;
1106 fse->code = ov965x_formats[i].code;
1108 fse->min_width = ov965x_framesizes[fse->index].width;
1109 fse->max_width = fse->min_width;
1110 fse->max_height = ov965x_framesizes[fse->index].height;
1111 fse->min_height = fse->max_height;
1113 return 0;
1116 static int ov965x_g_frame_interval(struct v4l2_subdev *sd,
1117 struct v4l2_subdev_frame_interval *fi)
1119 struct ov965x *ov965x = to_ov965x(sd);
1121 mutex_lock(&ov965x->lock);
1122 fi->interval = ov965x->fiv->interval;
1123 mutex_unlock(&ov965x->lock);
1125 return 0;
1128 static int __ov965x_set_frame_interval(struct ov965x *ov965x,
1129 struct v4l2_subdev_frame_interval *fi)
1131 struct v4l2_mbus_framefmt *mbus_fmt = &ov965x->format;
1132 const struct ov965x_interval *fiv = &ov965x_intervals[0];
1133 u64 req_int, err, min_err = ~0ULL;
1134 unsigned int i;
1136 if (fi->interval.denominator == 0)
1137 return -EINVAL;
1139 req_int = (u64)fi->interval.numerator * 10000;
1140 do_div(req_int, fi->interval.denominator);
1142 for (i = 0; i < ARRAY_SIZE(ov965x_intervals); i++) {
1143 const struct ov965x_interval *iv = &ov965x_intervals[i];
1145 if (mbus_fmt->width != iv->size.width ||
1146 mbus_fmt->height != iv->size.height)
1147 continue;
1148 err = abs((u64)(iv->interval.numerator * 10000) /
1149 iv->interval.denominator - req_int);
1150 if (err < min_err) {
1151 fiv = iv;
1152 min_err = err;
1155 ov965x->fiv = fiv;
1157 v4l2_dbg(1, debug, &ov965x->sd, "Changed frame interval to %u us\n",
1158 fiv->interval.numerator * 1000000 / fiv->interval.denominator);
1160 return 0;
1163 static int ov965x_s_frame_interval(struct v4l2_subdev *sd,
1164 struct v4l2_subdev_frame_interval *fi)
1166 struct ov965x *ov965x = to_ov965x(sd);
1167 int ret;
1169 v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n",
1170 fi->interval.numerator, fi->interval.denominator);
1172 mutex_lock(&ov965x->lock);
1173 ret = __ov965x_set_frame_interval(ov965x, fi);
1174 ov965x->apply_frame_fmt = 1;
1175 mutex_unlock(&ov965x->lock);
1176 return ret;
1179 static int ov965x_get_fmt(struct v4l2_subdev *sd,
1180 struct v4l2_subdev_pad_config *cfg,
1181 struct v4l2_subdev_format *fmt)
1183 struct ov965x *ov965x = to_ov965x(sd);
1184 struct v4l2_mbus_framefmt *mf;
1186 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
1187 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
1188 fmt->format = *mf;
1189 return 0;
1192 mutex_lock(&ov965x->lock);
1193 fmt->format = ov965x->format;
1194 mutex_unlock(&ov965x->lock);
1196 return 0;
1199 static void __ov965x_try_frame_size(struct v4l2_mbus_framefmt *mf,
1200 const struct ov965x_framesize **size)
1202 const struct ov965x_framesize *fsize = &ov965x_framesizes[0],
1203 *match = NULL;
1204 int i = ARRAY_SIZE(ov965x_framesizes);
1205 unsigned int min_err = UINT_MAX;
1207 while (i--) {
1208 int err = abs(fsize->width - mf->width)
1209 + abs(fsize->height - mf->height);
1210 if (err < min_err) {
1211 min_err = err;
1212 match = fsize;
1214 fsize++;
1216 if (!match)
1217 match = &ov965x_framesizes[0];
1218 mf->width = match->width;
1219 mf->height = match->height;
1220 if (size)
1221 *size = match;
1224 static int ov965x_set_fmt(struct v4l2_subdev *sd,
1225 struct v4l2_subdev_pad_config *cfg,
1226 struct v4l2_subdev_format *fmt)
1228 unsigned int index = ARRAY_SIZE(ov965x_formats);
1229 struct v4l2_mbus_framefmt *mf = &fmt->format;
1230 struct ov965x *ov965x = to_ov965x(sd);
1231 const struct ov965x_framesize *size = NULL;
1232 int ret = 0;
1234 __ov965x_try_frame_size(mf, &size);
1236 while (--index)
1237 if (ov965x_formats[index].code == mf->code)
1238 break;
1240 mf->colorspace = V4L2_COLORSPACE_JPEG;
1241 mf->code = ov965x_formats[index].code;
1242 mf->field = V4L2_FIELD_NONE;
1244 mutex_lock(&ov965x->lock);
1246 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
1247 if (cfg) {
1248 mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
1249 *mf = fmt->format;
1251 } else {
1252 if (ov965x->streaming) {
1253 ret = -EBUSY;
1254 } else {
1255 ov965x->frame_size = size;
1256 ov965x->format = fmt->format;
1257 ov965x->tslb_reg = ov965x_formats[index].tslb_reg;
1258 ov965x->apply_frame_fmt = 1;
1262 if (!ret && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
1263 struct v4l2_subdev_frame_interval fiv = {
1264 .interval = { 0, 1 }
1266 /* Reset to minimum possible frame interval */
1267 __ov965x_set_frame_interval(ov965x, &fiv);
1269 mutex_unlock(&ov965x->lock);
1271 if (!ret)
1272 ov965x_update_exposure_ctrl(ov965x);
1274 return ret;
1277 static int ov965x_set_frame_size(struct ov965x *ov965x)
1279 int i, ret = 0;
1281 for (i = 0; ret == 0 && i < NUM_FMT_REGS; i++)
1282 ret = ov965x_write(ov965x->client, frame_size_reg_addr[i],
1283 ov965x->frame_size->regs[i]);
1284 return ret;
1287 static int __ov965x_set_params(struct ov965x *ov965x)
1289 struct i2c_client *client = ov965x->client;
1290 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
1291 int ret = 0;
1292 u8 reg;
1294 if (ov965x->apply_frame_fmt) {
1295 reg = DEF_CLKRC + ov965x->fiv->clkrc_div;
1296 ret = ov965x_write(client, REG_CLKRC, reg);
1297 if (ret < 0)
1298 return ret;
1299 ret = ov965x_set_frame_size(ov965x);
1300 if (ret < 0)
1301 return ret;
1302 ret = ov965x_read(client, REG_TSLB, &reg);
1303 if (ret < 0)
1304 return ret;
1305 reg &= ~TSLB_YUYV_MASK;
1306 reg |= ov965x->tslb_reg;
1307 ret = ov965x_write(client, REG_TSLB, reg);
1308 if (ret < 0)
1309 return ret;
1311 ret = ov965x_set_default_gamma_curve(ov965x);
1312 if (ret < 0)
1313 return ret;
1314 ret = ov965x_set_color_matrix(ov965x);
1315 if (ret < 0)
1316 return ret;
1318 * Select manual banding filter, the filter will
1319 * be enabled further if required.
1321 ret = ov965x_read(client, REG_COM11, &reg);
1322 if (!ret)
1323 reg |= COM11_BANDING;
1324 ret = ov965x_write(client, REG_COM11, reg);
1325 if (ret < 0)
1326 return ret;
1328 * Banding filter (REG_MBD value) needs to match selected
1329 * resolution and frame rate, so it's always updated here.
1331 return ov965x_set_banding_filter(ov965x, ctrls->light_freq->val);
1334 static int ov965x_s_stream(struct v4l2_subdev *sd, int on)
1336 struct i2c_client *client = v4l2_get_subdevdata(sd);
1337 struct ov965x *ov965x = to_ov965x(sd);
1338 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
1339 int ret = 0;
1341 v4l2_dbg(1, debug, client, "%s: on: %d\n", __func__, on);
1343 mutex_lock(&ov965x->lock);
1344 if (ov965x->streaming == !on) {
1345 if (on)
1346 ret = __ov965x_set_params(ov965x);
1348 if (!ret && ctrls->update) {
1350 * ov965x_s_ctrl callback takes the mutex
1351 * so it needs to be released here.
1353 mutex_unlock(&ov965x->lock);
1354 ret = v4l2_ctrl_handler_setup(&ctrls->handler);
1356 mutex_lock(&ov965x->lock);
1357 if (!ret)
1358 ctrls->update = 0;
1360 if (!ret)
1361 ret = ov965x_write(client, REG_COM2,
1362 on ? 0x01 : 0x11);
1364 if (!ret)
1365 ov965x->streaming += on ? 1 : -1;
1367 WARN_ON(ov965x->streaming < 0);
1368 mutex_unlock(&ov965x->lock);
1370 return ret;
1374 * V4L2 subdev internal operations
1376 static int ov965x_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
1378 struct v4l2_mbus_framefmt *mf =
1379 v4l2_subdev_get_try_format(sd, fh->pad, 0);
1381 ov965x_get_default_format(mf);
1382 return 0;
1385 static const struct v4l2_subdev_pad_ops ov965x_pad_ops = {
1386 .enum_mbus_code = ov965x_enum_mbus_code,
1387 .enum_frame_size = ov965x_enum_frame_sizes,
1388 .get_fmt = ov965x_get_fmt,
1389 .set_fmt = ov965x_set_fmt,
1392 static const struct v4l2_subdev_video_ops ov965x_video_ops = {
1393 .s_stream = ov965x_s_stream,
1394 .g_frame_interval = ov965x_g_frame_interval,
1395 .s_frame_interval = ov965x_s_frame_interval,
1399 static const struct v4l2_subdev_internal_ops ov965x_sd_internal_ops = {
1400 .open = ov965x_open,
1403 static const struct v4l2_subdev_core_ops ov965x_core_ops = {
1404 .s_power = ov965x_s_power,
1405 .log_status = v4l2_ctrl_subdev_log_status,
1406 .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
1407 .unsubscribe_event = v4l2_event_subdev_unsubscribe,
1410 static const struct v4l2_subdev_ops ov965x_subdev_ops = {
1411 .core = &ov965x_core_ops,
1412 .pad = &ov965x_pad_ops,
1413 .video = &ov965x_video_ops,
1417 * Reset and power down GPIOs configuration
1419 static int ov965x_configure_gpios_pdata(struct ov965x *ov965x,
1420 const struct ov9650_platform_data *pdata)
1422 int ret, i;
1423 int gpios[NUM_GPIOS];
1425 gpios[GPIO_PWDN] = pdata->gpio_pwdn;
1426 gpios[GPIO_RST] = pdata->gpio_reset;
1428 for (i = 0; i < ARRAY_SIZE(ov965x->gpios); i++) {
1429 int gpio = gpios[i];
1431 if (!gpio_is_valid(gpio))
1432 continue;
1433 ret = devm_gpio_request_one(&ov965x->client->dev, gpio,
1434 GPIOF_OUT_INIT_HIGH, "OV965X");
1435 if (ret < 0)
1436 return ret;
1437 v4l2_dbg(1, debug, &ov965x->sd, "set gpio %d to 1\n", gpio);
1439 gpio_set_value_cansleep(gpio, 1);
1440 gpio_export(gpio, 0);
1441 ov965x->gpios[i] = gpio_to_desc(gpio);
1444 return 0;
1447 static int ov965x_configure_gpios(struct ov965x *ov965x)
1449 struct device *dev = &ov965x->client->dev;
1451 ov965x->gpios[GPIO_PWDN] = devm_gpiod_get_optional(dev, "powerdown",
1452 GPIOD_OUT_HIGH);
1453 if (IS_ERR(ov965x->gpios[GPIO_PWDN])) {
1454 dev_info(dev, "can't get %s GPIO\n", "powerdown");
1455 return PTR_ERR(ov965x->gpios[GPIO_PWDN]);
1458 ov965x->gpios[GPIO_RST] = devm_gpiod_get_optional(dev, "reset",
1459 GPIOD_OUT_HIGH);
1460 if (IS_ERR(ov965x->gpios[GPIO_RST])) {
1461 dev_info(dev, "can't get %s GPIO\n", "reset");
1462 return PTR_ERR(ov965x->gpios[GPIO_RST]);
1465 return 0;
1468 static int ov965x_detect_sensor(struct v4l2_subdev *sd)
1470 struct i2c_client *client = v4l2_get_subdevdata(sd);
1471 struct ov965x *ov965x = to_ov965x(sd);
1472 u8 pid, ver;
1473 int ret;
1475 mutex_lock(&ov965x->lock);
1476 ret = __ov965x_set_power(ov965x, 1);
1477 if (ret)
1478 goto out;
1480 msleep(25);
1482 /* Check sensor revision */
1483 ret = ov965x_read(client, REG_PID, &pid);
1484 if (!ret)
1485 ret = ov965x_read(client, REG_VER, &ver);
1487 __ov965x_set_power(ov965x, 0);
1489 if (!ret) {
1490 ov965x->id = OV965X_ID(pid, ver);
1491 if (ov965x->id == OV9650_ID || ov965x->id == OV9652_ID) {
1492 v4l2_info(sd, "Found OV%04X sensor\n", ov965x->id);
1493 } else {
1494 v4l2_err(sd, "Sensor detection failed (%04X, %d)\n",
1495 ov965x->id, ret);
1496 ret = -ENODEV;
1499 out:
1500 mutex_unlock(&ov965x->lock);
1502 return ret;
1505 static int ov965x_probe(struct i2c_client *client,
1506 const struct i2c_device_id *id)
1508 const struct ov9650_platform_data *pdata = client->dev.platform_data;
1509 struct v4l2_subdev *sd;
1510 struct ov965x *ov965x;
1511 int ret;
1513 ov965x = devm_kzalloc(&client->dev, sizeof(*ov965x), GFP_KERNEL);
1514 if (!ov965x)
1515 return -ENOMEM;
1517 ov965x->client = client;
1519 if (pdata) {
1520 if (pdata->mclk_frequency == 0) {
1521 dev_err(&client->dev, "MCLK frequency not specified\n");
1522 return -EINVAL;
1524 ov965x->mclk_frequency = pdata->mclk_frequency;
1526 ret = ov965x_configure_gpios_pdata(ov965x, pdata);
1527 if (ret < 0)
1528 return ret;
1529 } else if (dev_fwnode(&client->dev)) {
1530 ov965x->clk = devm_clk_get(&ov965x->client->dev, NULL);
1531 if (IS_ERR(ov965x->clk))
1532 return PTR_ERR(ov965x->clk);
1533 ov965x->mclk_frequency = clk_get_rate(ov965x->clk);
1535 ret = ov965x_configure_gpios(ov965x);
1536 if (ret < 0)
1537 return ret;
1538 } else {
1539 dev_err(&client->dev,
1540 "Neither platform data nor device property specified\n");
1542 return -EINVAL;
1545 mutex_init(&ov965x->lock);
1547 sd = &ov965x->sd;
1548 v4l2_i2c_subdev_init(sd, client, &ov965x_subdev_ops);
1549 strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name));
1551 sd->internal_ops = &ov965x_sd_internal_ops;
1552 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
1553 V4L2_SUBDEV_FL_HAS_EVENTS;
1555 ov965x->pad.flags = MEDIA_PAD_FL_SOURCE;
1556 sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
1557 ret = media_entity_pads_init(&sd->entity, 1, &ov965x->pad);
1558 if (ret < 0)
1559 goto err_mutex;
1561 ret = ov965x_initialize_controls(ov965x);
1562 if (ret < 0)
1563 goto err_me;
1565 ov965x_get_default_format(&ov965x->format);
1566 ov965x->frame_size = &ov965x_framesizes[0];
1567 ov965x->fiv = &ov965x_intervals[0];
1569 ret = ov965x_detect_sensor(sd);
1570 if (ret < 0)
1571 goto err_ctrls;
1573 /* Update exposure time min/max to match frame format */
1574 ov965x_update_exposure_ctrl(ov965x);
1576 ret = v4l2_async_register_subdev(sd);
1577 if (ret < 0)
1578 goto err_ctrls;
1580 return 0;
1581 err_ctrls:
1582 v4l2_ctrl_handler_free(sd->ctrl_handler);
1583 err_me:
1584 media_entity_cleanup(&sd->entity);
1585 err_mutex:
1586 mutex_destroy(&ov965x->lock);
1587 return ret;
1590 static int ov965x_remove(struct i2c_client *client)
1592 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1593 struct ov965x *ov965x = to_ov965x(sd);
1595 v4l2_async_unregister_subdev(sd);
1596 v4l2_ctrl_handler_free(sd->ctrl_handler);
1597 media_entity_cleanup(&sd->entity);
1598 mutex_destroy(&ov965x->lock);
1600 return 0;
1603 static const struct i2c_device_id ov965x_id[] = {
1604 { "OV9650", 0 },
1605 { "OV9652", 0 },
1606 { /* sentinel */ }
1608 MODULE_DEVICE_TABLE(i2c, ov965x_id);
1610 #if IS_ENABLED(CONFIG_OF)
1611 static const struct of_device_id ov965x_of_match[] = {
1612 { .compatible = "ovti,ov9650", },
1613 { .compatible = "ovti,ov9652", },
1614 { /* sentinel */ }
1616 MODULE_DEVICE_TABLE(of, ov965x_of_match);
1617 #endif
1619 static struct i2c_driver ov965x_i2c_driver = {
1620 .driver = {
1621 .name = DRIVER_NAME,
1622 .of_match_table = of_match_ptr(ov965x_of_match),
1624 .probe = ov965x_probe,
1625 .remove = ov965x_remove,
1626 .id_table = ov965x_id,
1629 module_i2c_driver(ov965x_i2c_driver);
1631 MODULE_AUTHOR("Sylwester Nawrocki <sylvester.nawrocki@gmail.com>");
1632 MODULE_DESCRIPTION("OV9650/OV9652 CMOS Image Sensor driver");
1633 MODULE_LICENSE("GPL");