?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
perf tools: Don't clone maps from parent when synthesizing forks
[linux/fpc-iii.git] / drivers / mfd / sm501.c
bloba530972c5a7e939a6b0be066c590a2ad7dccd9fc
1 /* linux/drivers/mfd/sm501.c
2 *
3 * Copyright (C) 2006 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 * Vincent Sanders <vince@simtec.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * SM501 MFD driver
12 */
13
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/delay.h>
17 #include <linux/init.h>
18 #include <linux/list.h>
19 #include <linux/device.h>
20 #include <linux/platform_device.h>
21 #include <linux/pci.h>
22 #include <linux/platform_data/i2c-gpio.h>
23 #include <linux/gpio/machine.h>
24 #include <linux/slab.h>
25
26 #include <linux/sm501.h>
27 #include <linux/sm501-regs.h>
28 #include <linux/serial_8250.h>
29
30 #include <linux/io.h>
31
32 struct sm501_device {
33 struct list_head list;
34 struct platform_device pdev;
35 };
36
37 struct sm501_gpio;
38
39 #ifdef CONFIG_MFD_SM501_GPIO
40 #include <linux/gpio.h>
41
42 struct sm501_gpio_chip {
43 struct gpio_chip gpio;
44 struct sm501_gpio *ourgpio; /* to get back to parent. */
45 void __iomem *regbase;
46 void __iomem *control; /* address of control reg. */
47 };
48
49 struct sm501_gpio {
50 struct sm501_gpio_chip low;
51 struct sm501_gpio_chip high;
52 spinlock_t lock;
53
54 unsigned int registered : 1;
55 void __iomem *regs;
56 struct resource *regs_res;
57 };
58 #else
59 struct sm501_gpio {
60 /* no gpio support, empty definition for sm501_devdata. */
61 };
62 #endif
63
64 struct sm501_devdata {
65 spinlock_t reg_lock;
66 struct mutex clock_lock;
67 struct list_head devices;
68 struct sm501_gpio gpio;
69
70 struct device *dev;
71 struct resource *io_res;
72 struct resource *mem_res;
73 struct resource *regs_claim;
74 struct sm501_platdata *platdata;
75
76
77 unsigned int in_suspend;
78 unsigned long pm_misc;
79
80 int unit_power[20];
81 unsigned int pdev_id;
82 unsigned int irq;
83 void __iomem *regs;
84 unsigned int rev;
85 };
86
87
88 #define MHZ (1000 * 1000)
89
90 #ifdef DEBUG
91 static const unsigned int div_tab[] = {
92 [0] = 1,
93 [1] = 2,
94 [2] = 4,
95 [3] = 8,
96 [4] = 16,
97 [5] = 32,
98 [6] = 64,
99 [7] = 128,
100 [8] = 3,
101 [9] = 6,
102 [10] = 12,
103 [11] = 24,
104 [12] = 48,
105 [13] = 96,
106 [14] = 192,
107 [15] = 384,
108 [16] = 5,
109 [17] = 10,
110 [18] = 20,
111 [19] = 40,
112 [20] = 80,
113 [21] = 160,
114 [22] = 320,
115 [23] = 604,
116 };
117
118 static unsigned long decode_div(unsigned long pll2, unsigned long val,
119 unsigned int lshft, unsigned int selbit,
120 unsigned long mask)
121 {
122 if (val & selbit)
123 pll2 = 288 * MHZ;
124
125 return pll2 / div_tab[(val >> lshft) & mask];
126 }
127
128 #define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
129
130 /* sm501_dump_clk
131 *
132 * Print out the current clock configuration for the device
133 */
134
135 static void sm501_dump_clk(struct sm501_devdata *sm)
136 {
137 unsigned long misct = smc501_readl(sm->regs + SM501_MISC_TIMING);
138 unsigned long pm0 = smc501_readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
139 unsigned long pm1 = smc501_readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
140 unsigned long pmc = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
141 unsigned long sdclk0, sdclk1;
142 unsigned long pll2 = 0;
143
144 switch (misct & 0x30) {
145 case 0x00:
146 pll2 = 336 * MHZ;
147 break;
148 case 0x10:
149 pll2 = 288 * MHZ;
150 break;
151 case 0x20:
152 pll2 = 240 * MHZ;
153 break;
154 case 0x30:
155 pll2 = 192 * MHZ;
156 break;
157 }
158
159 sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
160 sdclk0 /= div_tab[((misct >> 8) & 0xf)];
161
162 sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
163 sdclk1 /= div_tab[((misct >> 16) & 0xf)];
164
165 dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
166 misct, pm0, pm1);
167
168 dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
169 fmt_freq(pll2), sdclk0, sdclk1);
170
171 dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
172
173 dev_dbg(sm->dev, "PM0[%c]: "
174 "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
175 "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
176 (pmc & 3 ) == 0 ? '*' : '-',
177 fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
178 fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
179 fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15)),
180 fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15)));
181
182 dev_dbg(sm->dev, "PM1[%c]: "
183 "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
184 "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
185 (pmc & 3 ) == 1 ? '*' : '-',
186 fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
187 fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
188 fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15)),
189 fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15)));
190 }
191
192 static void sm501_dump_regs(struct sm501_devdata *sm)
193 {
194 void __iomem *regs = sm->regs;
195
196 dev_info(sm->dev, "System Control %08x\n",
197 smc501_readl(regs + SM501_SYSTEM_CONTROL));
198 dev_info(sm->dev, "Misc Control %08x\n",
199 smc501_readl(regs + SM501_MISC_CONTROL));
200 dev_info(sm->dev, "GPIO Control Low %08x\n",
201 smc501_readl(regs + SM501_GPIO31_0_CONTROL));
202 dev_info(sm->dev, "GPIO Control Hi %08x\n",
203 smc501_readl(regs + SM501_GPIO63_32_CONTROL));
204 dev_info(sm->dev, "DRAM Control %08x\n",
205 smc501_readl(regs + SM501_DRAM_CONTROL));
206 dev_info(sm->dev, "Arbitration Ctrl %08x\n",
207 smc501_readl(regs + SM501_ARBTRTN_CONTROL));
208 dev_info(sm->dev, "Misc Timing %08x\n",
209 smc501_readl(regs + SM501_MISC_TIMING));
210 }
211
212 static void sm501_dump_gate(struct sm501_devdata *sm)
213 {
214 dev_info(sm->dev, "CurrentGate %08x\n",
215 smc501_readl(sm->regs + SM501_CURRENT_GATE));
216 dev_info(sm->dev, "CurrentClock %08x\n",
217 smc501_readl(sm->regs + SM501_CURRENT_CLOCK));
218 dev_info(sm->dev, "PowerModeControl %08x\n",
219 smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL));
220 }
221
222 #else
223 static inline void sm501_dump_gate(struct sm501_devdata *sm) { }
224 static inline void sm501_dump_regs(struct sm501_devdata *sm) { }
225 static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
226 #endif
227
228 /* sm501_sync_regs
229 *
230 * ensure the
231 */
232
233 static void sm501_sync_regs(struct sm501_devdata *sm)
234 {
235 smc501_readl(sm->regs);
236 }
237
238 static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
239 {
240 /* during suspend/resume, we are currently not allowed to sleep,
241 * so change to using mdelay() instead of msleep() if we
242 * are in one of these paths */
243
244 if (sm->in_suspend)
245 mdelay(delay);
246 else
247 msleep(delay);
248 }
249
250 /* sm501_misc_control
251 *
252 * alters the miscellaneous control parameters
253 */
254
255 int sm501_misc_control(struct device *dev,
256 unsigned long set, unsigned long clear)
257 {
258 struct sm501_devdata *sm = dev_get_drvdata(dev);
259 unsigned long misc;
260 unsigned long save;
261 unsigned long to;
262
263 spin_lock_irqsave(&sm->reg_lock, save);
264
265 misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
266 to = (misc & ~clear) | set;
267
268 if (to != misc) {
269 smc501_writel(to, sm->regs + SM501_MISC_CONTROL);
270 sm501_sync_regs(sm);
271
272 dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
273 }
274
275 spin_unlock_irqrestore(&sm->reg_lock, save);
276 return to;
277 }
278
279 EXPORT_SYMBOL_GPL(sm501_misc_control);
280
281 /* sm501_modify_reg
282 *
283 * Modify a register in the SM501 which may be shared with other
284 * drivers.
285 */
286
287 unsigned long sm501_modify_reg(struct device *dev,
288 unsigned long reg,
289 unsigned long set,
290 unsigned long clear)
291 {
292 struct sm501_devdata *sm = dev_get_drvdata(dev);
293 unsigned long data;
294 unsigned long save;
295
296 spin_lock_irqsave(&sm->reg_lock, save);
297
298 data = smc501_readl(sm->regs + reg);
299 data |= set;
300 data &= ~clear;
301
302 smc501_writel(data, sm->regs + reg);
303 sm501_sync_regs(sm);
304
305 spin_unlock_irqrestore(&sm->reg_lock, save);
306
307 return data;
308 }
309
310 EXPORT_SYMBOL_GPL(sm501_modify_reg);
311
312 /* sm501_unit_power
313 *
314 * alters the power active gate to set specific units on or off
315 */
316
317 int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
318 {
319 struct sm501_devdata *sm = dev_get_drvdata(dev);
320 unsigned long mode;
321 unsigned long gate;
322 unsigned long clock;
323
324 mutex_lock(&sm->clock_lock);
325
326 mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
327 gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
328 clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
329
330 mode &= 3; /* get current power mode */
331
332 if (unit >= ARRAY_SIZE(sm->unit_power)) {
333 dev_err(dev, "%s: bad unit %d\n", __func__, unit);
334 goto already;
335 }
336
337 dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit,
338 sm->unit_power[unit], to);
339
340 if (to == 0 && sm->unit_power[unit] == 0) {
341 dev_err(sm->dev, "unit %d is already shutdown\n", unit);
342 goto already;
343 }
344
345 sm->unit_power[unit] += to ? 1 : -1;
346 to = sm->unit_power[unit] ? 1 : 0;
347
348 if (to) {
349 if (gate & (1 << unit))
350 goto already;
351 gate |= (1 << unit);
352 } else {
353 if (!(gate & (1 << unit)))
354 goto already;
355 gate &= ~(1 << unit);
356 }
357
358 switch (mode) {
359 case 1:
360 smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
361 smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
362 mode = 0;
363 break;
364 case 2:
365 case 0:
366 smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
367 smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
368 mode = 1;
369 break;
370
371 default:
372 gate = -1;
373 goto already;
374 }
375
376 smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
377 sm501_sync_regs(sm);
378
379 dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
380 gate, clock, mode);
381
382 sm501_mdelay(sm, 16);
383
384 already:
385 mutex_unlock(&sm->clock_lock);
386 return gate;
387 }
388
389 EXPORT_SYMBOL_GPL(sm501_unit_power);
390
391 /* clock value structure. */
392 struct sm501_clock {
393 unsigned long mclk;
394 int divider;
395 int shift;
396 unsigned int m, n, k;
397 };
398
399 /* sm501_calc_clock
400 *
401 * Calculates the nearest discrete clock frequency that
402 * can be achieved with the specified input clock.
403 * the maximum divisor is 3 or 5
404 */
405
406 static int sm501_calc_clock(unsigned long freq,
407 struct sm501_clock *clock,
408 int max_div,
409 unsigned long mclk,
410 long *best_diff)
411 {
412 int ret = 0;
413 int divider;
414 int shift;
415 long diff;
416
417 /* try dividers 1 and 3 for CRT and for panel,
418 try divider 5 for panel only.*/
419
420 for (divider = 1; divider <= max_div; divider += 2) {
421 /* try all 8 shift values.*/
422 for (shift = 0; shift < 8; shift++) {
423 /* Calculate difference to requested clock */
424 diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq;
425 if (diff < 0)
426 diff = -diff;
427
428 /* If it is less than the current, use it */
429 if (diff < *best_diff) {
430 *best_diff = diff;
431
432 clock->mclk = mclk;
433 clock->divider = divider;
434 clock->shift = shift;
435 ret = 1;
436 }
437 }
438 }
439
440 return ret;
441 }
442
443 /* sm501_calc_pll
444 *
445 * Calculates the nearest discrete clock frequency that can be
446 * achieved using the programmable PLL.
447 * the maximum divisor is 3 or 5
448 */
449
450 static unsigned long sm501_calc_pll(unsigned long freq,
451 struct sm501_clock *clock,
452 int max_div)
453 {
454 unsigned long mclk;
455 unsigned int m, n, k;
456 long best_diff = 999999999;
457
458 /*
459 * The SM502 datasheet doesn't specify the min/max values for M and N.
460 * N = 1 at least doesn't work in practice.
461 */
462 for (m = 2; m <= 255; m++) {
463 for (n = 2; n <= 127; n++) {
464 for (k = 0; k <= 1; k++) {
465 mclk = (24000000UL * m / n) >> k;
466
467 if (sm501_calc_clock(freq, clock, max_div,
468 mclk, &best_diff)) {
469 clock->m = m;
470 clock->n = n;
471 clock->k = k;
472 }
473 }
474 }
475 }
476
477 /* Return best clock. */
478 return clock->mclk / (clock->divider << clock->shift);
479 }
480
481 /* sm501_select_clock
482 *
483 * Calculates the nearest discrete clock frequency that can be
484 * achieved using the 288MHz and 336MHz PLLs.
485 * the maximum divisor is 3 or 5
486 */
487
488 static unsigned long sm501_select_clock(unsigned long freq,
489 struct sm501_clock *clock,
490 int max_div)
491 {
492 unsigned long mclk;
493 long best_diff = 999999999;
494
495 /* Try 288MHz and 336MHz clocks. */
496 for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
497 sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
498 }
499
500 /* Return best clock. */
501 return clock->mclk / (clock->divider << clock->shift);
502 }
503
504 /* sm501_set_clock
505 *
506 * set one of the four clock sources to the closest available frequency to
507 * the one specified
508 */
509
510 unsigned long sm501_set_clock(struct device *dev,
511 int clksrc,
512 unsigned long req_freq)
513 {
514 struct sm501_devdata *sm = dev_get_drvdata(dev);
515 unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
516 unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
517 unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
518 unsigned int pll_reg = 0;
519 unsigned long sm501_freq; /* the actual frequency achieved */
520 u64 reg;
521
522 struct sm501_clock to;
523
524 /* find achivable discrete frequency and setup register value
525 * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
526 * has an extra bit for the divider */
527
528 switch (clksrc) {
529 case SM501_CLOCK_P2XCLK:
530 /* This clock is divided in half so to achieve the
531 * requested frequency the value must be multiplied by
532 * 2. This clock also has an additional pre divisor */
533
534 if (sm->rev >= 0xC0) {
535 /* SM502 -> use the programmable PLL */
536 sm501_freq = (sm501_calc_pll(2 * req_freq,
537 &to, 5) / 2);
538 reg = to.shift & 0x07;/* bottom 3 bits are shift */
539 if (to.divider == 3)
540 reg |= 0x08; /* /3 divider required */
541 else if (to.divider == 5)
542 reg |= 0x10; /* /5 divider required */
543 reg |= 0x40; /* select the programmable PLL */
544 pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
545 } else {
546 sm501_freq = (sm501_select_clock(2 * req_freq,
547 &to, 5) / 2);
548 reg = to.shift & 0x07;/* bottom 3 bits are shift */
549 if (to.divider == 3)
550 reg |= 0x08; /* /3 divider required */
551 else if (to.divider == 5)
552 reg |= 0x10; /* /5 divider required */
553 if (to.mclk != 288000000)
554 reg |= 0x20; /* which mclk pll is source */
555 }
556 break;
557
558 case SM501_CLOCK_V2XCLK:
559 /* This clock is divided in half so to achieve the
560 * requested frequency the value must be multiplied by 2. */
561
562 sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
563 reg=to.shift & 0x07; /* bottom 3 bits are shift */
564 if (to.divider == 3)
565 reg |= 0x08; /* /3 divider required */
566 if (to.mclk != 288000000)
567 reg |= 0x10; /* which mclk pll is source */
568 break;
569
570 case SM501_CLOCK_MCLK:
571 case SM501_CLOCK_M1XCLK:
572 /* These clocks are the same and not further divided */
573
574 sm501_freq = sm501_select_clock( req_freq, &to, 3);
575 reg=to.shift & 0x07; /* bottom 3 bits are shift */
576 if (to.divider == 3)
577 reg |= 0x08; /* /3 divider required */
578 if (to.mclk != 288000000)
579 reg |= 0x10; /* which mclk pll is source */
580 break;
581
582 default:
583 return 0; /* this is bad */
584 }
585
586 mutex_lock(&sm->clock_lock);
587
588 mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
589 gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
590 clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
591
592 clock = clock & ~(0xFF << clksrc);
593 clock |= reg<<clksrc;
594
595 mode &= 3; /* find current mode */
596
597 switch (mode) {
598 case 1:
599 smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
600 smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
601 mode = 0;
602 break;
603 case 2:
604 case 0:
605 smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
606 smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
607 mode = 1;
608 break;
609
610 default:
611 mutex_unlock(&sm->clock_lock);
612 return -1;
613 }
614
615 smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
616
617 if (pll_reg)
618 smc501_writel(pll_reg,
619 sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
620
621 sm501_sync_regs(sm);
622
623 dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
624 gate, clock, mode);
625
626 sm501_mdelay(sm, 16);
627 mutex_unlock(&sm->clock_lock);
628
629 sm501_dump_clk(sm);
630
631 return sm501_freq;
632 }
633
634 EXPORT_SYMBOL_GPL(sm501_set_clock);
635
636 /* sm501_find_clock
637 *
638 * finds the closest available frequency for a given clock
639 */
640
641 unsigned long sm501_find_clock(struct device *dev,
642 int clksrc,
643 unsigned long req_freq)
644 {
645 struct sm501_devdata *sm = dev_get_drvdata(dev);
646 unsigned long sm501_freq; /* the frequency achieveable by the 501 */
647 struct sm501_clock to;
648
649 switch (clksrc) {
650 case SM501_CLOCK_P2XCLK:
651 if (sm->rev >= 0xC0) {
652 /* SM502 -> use the programmable PLL */
653 sm501_freq = (sm501_calc_pll(2 * req_freq,
654 &to, 5) / 2);
655 } else {
656 sm501_freq = (sm501_select_clock(2 * req_freq,
657 &to, 5) / 2);
658 }
659 break;
660
661 case SM501_CLOCK_V2XCLK:
662 sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
663 break;
664
665 case SM501_CLOCK_MCLK:
666 case SM501_CLOCK_M1XCLK:
667 sm501_freq = sm501_select_clock(req_freq, &to, 3);
668 break;
669
670 default:
671 sm501_freq = 0; /* error */
672 }
673
674 return sm501_freq;
675 }
676
677 EXPORT_SYMBOL_GPL(sm501_find_clock);
678
679 static struct sm501_device *to_sm_device(struct platform_device *pdev)
680 {
681 return container_of(pdev, struct sm501_device, pdev);
682 }
683
684 /* sm501_device_release
685 *
686 * A release function for the platform devices we create to allow us to
687 * free any items we allocated
688 */
689
690 static void sm501_device_release(struct device *dev)
691 {
692 kfree(to_sm_device(to_platform_device(dev)));
693 }
694
695 /* sm501_create_subdev
696 *
697 * Create a skeleton platform device with resources for passing to a
698 * sub-driver
699 */
700
701 static struct platform_device *
702 sm501_create_subdev(struct sm501_devdata *sm, char *name,
703 unsigned int res_count, unsigned int platform_data_size)
704 {
705 struct sm501_device *smdev;
706
707 smdev = kzalloc(sizeof(struct sm501_device) +
708 (sizeof(struct resource) * res_count) +
709 platform_data_size, GFP_KERNEL);
710 if (!smdev)
711 return NULL;
712
713 smdev->pdev.dev.release = sm501_device_release;
714
715 smdev->pdev.name = name;
716 smdev->pdev.id = sm->pdev_id;
717 smdev->pdev.dev.parent = sm->dev;
718 smdev->pdev.dev.coherent_dma_mask = 0xffffffff;
719
720 if (res_count) {
721 smdev->pdev.resource = (struct resource *)(smdev+1);
722 smdev->pdev.num_resources = res_count;
723 }
724 if (platform_data_size)
725 smdev->pdev.dev.platform_data = (void *)(smdev+1);
726
727 return &smdev->pdev;
728 }
729
730 /* sm501_register_device
731 *
732 * Register a platform device created with sm501_create_subdev()
733 */
734
735 static int sm501_register_device(struct sm501_devdata *sm,
736 struct platform_device *pdev)
737 {
738 struct sm501_device *smdev = to_sm_device(pdev);
739 int ptr;
740 int ret;
741
742 for (ptr = 0; ptr < pdev->num_resources; ptr++) {
743 printk(KERN_DEBUG "%s[%d] %pR\n",
744 pdev->name, ptr, &pdev->resource[ptr]);
745 }
746
747 ret = platform_device_register(pdev);
748
749 if (ret >= 0) {
750 dev_dbg(sm->dev, "registered %s\n", pdev->name);
751 list_add_tail(&smdev->list, &sm->devices);
752 } else
753 dev_err(sm->dev, "error registering %s (%d)\n",
754 pdev->name, ret);
755
756 return ret;
757 }
758
759 /* sm501_create_subio
760 *
761 * Fill in an IO resource for a sub device
762 */
763
764 static void sm501_create_subio(struct sm501_devdata *sm,
765 struct resource *res,
766 resource_size_t offs,
767 resource_size_t size)
768 {
769 res->flags = IORESOURCE_MEM;
770 res->parent = sm->io_res;
771 res->start = sm->io_res->start + offs;
772 res->end = res->start + size - 1;
773 }
774
775 /* sm501_create_mem
776 *
777 * Fill in an MEM resource for a sub device
778 */
779
780 static void sm501_create_mem(struct sm501_devdata *sm,
781 struct resource *res,
782 resource_size_t *offs,
783 resource_size_t size)
784 {
785 *offs -= size; /* adjust memory size */
786
787 res->flags = IORESOURCE_MEM;
788 res->parent = sm->mem_res;
789 res->start = sm->mem_res->start + *offs;
790 res->end = res->start + size - 1;
791 }
792
793 /* sm501_create_irq
794 *
795 * Fill in an IRQ resource for a sub device
796 */
797
798 static void sm501_create_irq(struct sm501_devdata *sm,
799 struct resource *res)
800 {
801 res->flags = IORESOURCE_IRQ;
802 res->parent = NULL;
803 res->start = res->end = sm->irq;
804 }
805
806 static int sm501_register_usbhost(struct sm501_devdata *sm,
807 resource_size_t *mem_avail)
808 {
809 struct platform_device *pdev;
810
811 pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
812 if (!pdev)
813 return -ENOMEM;
814
815 sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
816 sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
817 sm501_create_irq(sm, &pdev->resource[2]);
818
819 return sm501_register_device(sm, pdev);
820 }
821
822 static void sm501_setup_uart_data(struct sm501_devdata *sm,
823 struct plat_serial8250_port *uart_data,
824 unsigned int offset)
825 {
826 uart_data->membase = sm->regs + offset;
827 uart_data->mapbase = sm->io_res->start + offset;
828 uart_data->iotype = UPIO_MEM;
829 uart_data->irq = sm->irq;
830 uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
831 uart_data->regshift = 2;
832 uart_data->uartclk = (9600 * 16);
833 }
834
835 static int sm501_register_uart(struct sm501_devdata *sm, int devices)
836 {
837 struct platform_device *pdev;
838 struct plat_serial8250_port *uart_data;
839
840 pdev = sm501_create_subdev(sm, "serial8250", 0,
841 sizeof(struct plat_serial8250_port) * 3);
842 if (!pdev)
843 return -ENOMEM;
844
845 uart_data = dev_get_platdata(&pdev->dev);
846
847 if (devices & SM501_USE_UART0) {
848 sm501_setup_uart_data(sm, uart_data++, 0x30000);
849 sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
850 sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
851 sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
852 }
853 if (devices & SM501_USE_UART1) {
854 sm501_setup_uart_data(sm, uart_data++, 0x30020);
855 sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
856 sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
857 sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
858 }
859
860 pdev->id = PLAT8250_DEV_SM501;
861
862 return sm501_register_device(sm, pdev);
863 }
864
865 static int sm501_register_display(struct sm501_devdata *sm,
866 resource_size_t *mem_avail)
867 {
868 struct platform_device *pdev;
869
870 pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
871 if (!pdev)
872 return -ENOMEM;
873
874 sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
875 sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
876 sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
877 sm501_create_irq(sm, &pdev->resource[3]);
878
879 return sm501_register_device(sm, pdev);
880 }
881
882 #ifdef CONFIG_MFD_SM501_GPIO
883
884 static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
885 {
886 return container_of(gpio, struct sm501_devdata, gpio);
887 }
888
889 static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
890
891 {
892 struct sm501_gpio_chip *smgpio = gpiochip_get_data(chip);
893 unsigned long result;
894
895 result = smc501_readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
896 result >>= offset;
897
898 return result & 1UL;
899 }
900
901 static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
902 unsigned long bit)
903 {
904 unsigned long ctrl;
905
906 /* check and modify if this pin is not set as gpio. */
907
908 if (smc501_readl(smchip->control) & bit) {
909 dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
910 "changing mode of gpio, bit %08lx\n", bit);
911
912 ctrl = smc501_readl(smchip->control);
913 ctrl &= ~bit;
914 smc501_writel(ctrl, smchip->control);
915
916 sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
917 }
918 }
919
920 static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
921
922 {
923 struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
924 struct sm501_gpio *smgpio = smchip->ourgpio;
925 unsigned long bit = 1 << offset;
926 void __iomem *regs = smchip->regbase;
927 unsigned long save;
928 unsigned long val;
929
930 dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
931 __func__, chip, offset);
932
933 spin_lock_irqsave(&smgpio->lock, save);
934
935 val = smc501_readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
936 if (value)
937 val |= bit;
938 smc501_writel(val, regs);
939
940 sm501_sync_regs(sm501_gpio_to_dev(smgpio));
941 sm501_gpio_ensure_gpio(smchip, bit);
942
943 spin_unlock_irqrestore(&smgpio->lock, save);
944 }
945
946 static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
947 {
948 struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
949 struct sm501_gpio *smgpio = smchip->ourgpio;
950 void __iomem *regs = smchip->regbase;
951 unsigned long bit = 1 << offset;
952 unsigned long save;
953 unsigned long ddr;
954
955 dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
956 __func__, chip, offset);
957
958 spin_lock_irqsave(&smgpio->lock, save);
959
960 ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
961 smc501_writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
962
963 sm501_sync_regs(sm501_gpio_to_dev(smgpio));
964 sm501_gpio_ensure_gpio(smchip, bit);
965
966 spin_unlock_irqrestore(&smgpio->lock, save);
967
968 return 0;
969 }
970
971 static int sm501_gpio_output(struct gpio_chip *chip,
972 unsigned offset, int value)
973 {
974 struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
975 struct sm501_gpio *smgpio = smchip->ourgpio;
976 unsigned long bit = 1 << offset;
977 void __iomem *regs = smchip->regbase;
978 unsigned long save;
979 unsigned long val;
980 unsigned long ddr;
981
982 dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
983 __func__, chip, offset, value);
984
985 spin_lock_irqsave(&smgpio->lock, save);
986
987 val = smc501_readl(regs + SM501_GPIO_DATA_LOW);
988 if (value)
989 val |= bit;
990 else
991 val &= ~bit;
992 smc501_writel(val, regs);
993
994 ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
995 smc501_writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
996
997 sm501_sync_regs(sm501_gpio_to_dev(smgpio));
998 smc501_writel(val, regs + SM501_GPIO_DATA_LOW);
999
1000 sm501_sync_regs(sm501_gpio_to_dev(smgpio));
1001 spin_unlock_irqrestore(&smgpio->lock, save);
1002
1003 return 0;
1004 }
1005
1006 static const struct gpio_chip gpio_chip_template = {
1007 .ngpio = 32,
1008 .direction_input = sm501_gpio_input,
1009 .direction_output = sm501_gpio_output,
1010 .set = sm501_gpio_set,
1011 .get = sm501_gpio_get,
1012 };
1013
1014 static int sm501_gpio_register_chip(struct sm501_devdata *sm,
1015 struct sm501_gpio *gpio,
1016 struct sm501_gpio_chip *chip)
1017 {
1018 struct sm501_platdata *pdata = sm->platdata;
1019 struct gpio_chip *gchip = &chip->gpio;
1020 int base = pdata->gpio_base;
1021
1022 chip->gpio = gpio_chip_template;
1023
1024 if (chip == &gpio->high) {
1025 if (base > 0)
1026 base += 32;
1027 chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
1028 chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
1029 gchip->label = "SM501-HIGH";
1030 } else {
1031 chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
1032 chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
1033 gchip->label = "SM501-LOW";
1034 }
1035
1036 gchip->base = base;
1037 chip->ourgpio = gpio;
1038
1039 return gpiochip_add_data(gchip, chip);
1040 }
1041
1042 static int sm501_register_gpio(struct sm501_devdata *sm)
1043 {
1044 struct sm501_gpio *gpio = &sm->gpio;
1045 resource_size_t iobase = sm->io_res->start + SM501_GPIO;
1046 int ret;
1047
1048 dev_dbg(sm->dev, "registering gpio block %08llx\n",
1049 (unsigned long long)iobase);
1050
1051 spin_lock_init(&gpio->lock);
1052
1053 gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
1054 if (!gpio->regs_res) {
1055 dev_err(sm->dev, "gpio: failed to request region\n");
1056 return -ENXIO;
1057 }
1058
1059 gpio->regs = ioremap(iobase, 0x20);
1060 if (!gpio->regs) {
1061 dev_err(sm->dev, "gpio: failed to remap registers\n");
1062 ret = -ENXIO;
1063 goto err_claimed;
1064 }
1065
1066 /* Register both our chips. */
1067
1068 ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
1069 if (ret) {
1070 dev_err(sm->dev, "failed to add low chip\n");
1071 goto err_mapped;
1072 }
1073
1074 ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
1075 if (ret) {
1076 dev_err(sm->dev, "failed to add high chip\n");
1077 goto err_low_chip;
1078 }
1079
1080 gpio->registered = 1;
1081
1082 return 0;
1083
1084 err_low_chip:
1085 gpiochip_remove(&gpio->low.gpio);
1086
1087 err_mapped:
1088 iounmap(gpio->regs);
1089
1090 err_claimed:
1091 release_resource(gpio->regs_res);
1092 kfree(gpio->regs_res);
1093
1094 return ret;
1095 }
1096
1097 static void sm501_gpio_remove(struct sm501_devdata *sm)
1098 {
1099 struct sm501_gpio *gpio = &sm->gpio;
1100
1101 if (!sm->gpio.registered)
1102 return;
1103
1104 gpiochip_remove(&gpio->low.gpio);
1105 gpiochip_remove(&gpio->high.gpio);
1106
1107 iounmap(gpio->regs);
1108 release_resource(gpio->regs_res);
1109 kfree(gpio->regs_res);
1110 }
1111
1112 static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
1113 {
1114 return sm->gpio.registered;
1115 }
1116 #else
1117 static inline int sm501_register_gpio(struct sm501_devdata *sm)
1118 {
1119 return 0;
1120 }
1121
1122 static inline void sm501_gpio_remove(struct sm501_devdata *sm)
1123 {
1124 }
1125
1126 static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
1127 {
1128 return 0;
1129 }
1130 #endif
1131
1132 static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
1133 struct sm501_platdata_gpio_i2c *iic)
1134 {
1135 struct i2c_gpio_platform_data *icd;
1136 struct platform_device *pdev;
1137 struct gpiod_lookup_table *lookup;
1138
1139 pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
1140 sizeof(struct i2c_gpio_platform_data));
1141 if (!pdev)
1142 return -ENOMEM;
1143
1144 /* Create a gpiod lookup using gpiochip-local offsets */
1145 lookup = devm_kzalloc(&pdev->dev,
1146 sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
1147 GFP_KERNEL);
1148 lookup->dev_id = "i2c-gpio";
1149 if (iic->pin_sda < 32)
1150 lookup->table[0].chip_label = "SM501-LOW";
1151 else
1152 lookup->table[0].chip_label = "SM501-HIGH";
1153 lookup->table[0].chip_hwnum = iic->pin_sda % 32;
1154 lookup->table[0].con_id = NULL;
1155 lookup->table[0].idx = 0;
1156 lookup->table[0].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN;
1157 if (iic->pin_scl < 32)
1158 lookup->table[1].chip_label = "SM501-LOW";
1159 else
1160 lookup->table[1].chip_label = "SM501-HIGH";
1161 lookup->table[1].chip_hwnum = iic->pin_scl % 32;
1162 lookup->table[1].con_id = NULL;
1163 lookup->table[1].idx = 1;
1164 lookup->table[1].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN;
1165 gpiod_add_lookup_table(lookup);
1166
1167 icd = dev_get_platdata(&pdev->dev);
1168 icd->timeout = iic->timeout;
1169 icd->udelay = iic->udelay;
1170
1171 /* note, we can't use either of the pin numbers, as the i2c-gpio
1172 * driver uses the platform.id field to generate the bus number
1173 * to register with the i2c core; The i2c core doesn't have enough
1174 * entries to deal with anything we currently use.
1175 */
1176
1177 pdev->id = iic->bus_num;
1178
1179 dev_info(sm->dev, "registering i2c-%d: sda=%d, scl=%d\n",
1180 iic->bus_num,
1181 iic->pin_sda, iic->pin_scl);
1182
1183 return sm501_register_device(sm, pdev);
1184 }
1185
1186 static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
1187 struct sm501_platdata *pdata)
1188 {
1189 struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
1190 int index;
1191 int ret;
1192
1193 for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
1194 ret = sm501_register_gpio_i2c_instance(sm, iic);
1195 if (ret < 0)
1196 return ret;
1197 }
1198
1199 return 0;
1200 }
1201
1202 /* sm501_dbg_regs
1203 *
1204 * Debug attribute to attach to parent device to show core registers
1205 */
1206
1207 static ssize_t sm501_dbg_regs(struct device *dev,
1208 struct device_attribute *attr, char *buff)
1209 {
1210 struct sm501_devdata *sm = dev_get_drvdata(dev) ;
1211 unsigned int reg;
1212 char *ptr = buff;
1213 int ret;
1214
1215 for (reg = 0x00; reg < 0x70; reg += 4) {
1216 ret = sprintf(ptr, "%08x = %08x\n",
1217 reg, smc501_readl(sm->regs + reg));
1218 ptr += ret;
1219 }
1220
1221 return ptr - buff;
1222 }
1223
1224
1225 static DEVICE_ATTR(dbg_regs, 0444, sm501_dbg_regs, NULL);
1226
1227 /* sm501_init_reg
1228 *
1229 * Helper function for the init code to setup a register
1230 *
1231 * clear the bits which are set in r->mask, and then set
1232 * the bits set in r->set.
1233 */
1234
1235 static inline void sm501_init_reg(struct sm501_devdata *sm,
1236 unsigned long reg,
1237 struct sm501_reg_init *r)
1238 {
1239 unsigned long tmp;
1240
1241 tmp = smc501_readl(sm->regs + reg);
1242 tmp &= ~r->mask;
1243 tmp |= r->set;
1244 smc501_writel(tmp, sm->regs + reg);
1245 }
1246
1247 /* sm501_init_regs
1248 *
1249 * Setup core register values
1250 */
1251
1252 static void sm501_init_regs(struct sm501_devdata *sm,
1253 struct sm501_initdata *init)
1254 {
1255 sm501_misc_control(sm->dev,
1256 init->misc_control.set,
1257 init->misc_control.mask);
1258
1259 sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
1260 sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
1261 sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
1262
1263 if (init->m1xclk) {
1264 dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
1265 sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
1266 }
1267
1268 if (init->mclk) {
1269 dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
1270 sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
1271 }
1272
1273 }
1274
1275 /* Check the PLL sources for the M1CLK and M1XCLK
1276 *
1277 * If the M1CLK and M1XCLKs are not sourced from the same PLL, then
1278 * there is a risk (see errata AB-5) that the SM501 will cease proper
1279 * function. If this happens, then it is likely the SM501 will
1280 * hang the system.
1281 */
1282
1283 static int sm501_check_clocks(struct sm501_devdata *sm)
1284 {
1285 unsigned long pwrmode = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
1286 unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
1287 unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
1288
1289 return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0));
1290 }
1291
1292 static unsigned int sm501_mem_local[] = {
1293 [0] = 4*1024*1024,
1294 [1] = 8*1024*1024,
1295 [2] = 16*1024*1024,
1296 [3] = 32*1024*1024,
1297 [4] = 64*1024*1024,
1298 [5] = 2*1024*1024,
1299 };
1300
1301 /* sm501_init_dev
1302 *
1303 * Common init code for an SM501
1304 */
1305
1306 static int sm501_init_dev(struct sm501_devdata *sm)
1307 {
1308 struct sm501_initdata *idata;
1309 struct sm501_platdata *pdata;
1310 resource_size_t mem_avail;
1311 unsigned long dramctrl;
1312 unsigned long devid;
1313 int ret;
1314
1315 mutex_init(&sm->clock_lock);
1316 spin_lock_init(&sm->reg_lock);
1317
1318 INIT_LIST_HEAD(&sm->devices);
1319
1320 devid = smc501_readl(sm->regs + SM501_DEVICEID);
1321
1322 if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
1323 dev_err(sm->dev, "incorrect device id %08lx\n", devid);
1324 return -EINVAL;
1325 }
1326
1327 /* disable irqs */
1328 smc501_writel(0, sm->regs + SM501_IRQ_MASK);
1329
1330 dramctrl = smc501_readl(sm->regs + SM501_DRAM_CONTROL);
1331 mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
1332
1333 dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
1334 sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
1335
1336 sm->rev = devid & SM501_DEVICEID_REVMASK;
1337
1338 sm501_dump_gate(sm);
1339
1340 ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
1341 if (ret)
1342 dev_err(sm->dev, "failed to create debug regs file\n");
1343
1344 sm501_dump_clk(sm);
1345
1346 /* check to see if we have some device initialisation */
1347
1348 pdata = sm->platdata;
1349 idata = pdata ? pdata->init : NULL;
1350
1351 if (idata) {
1352 sm501_init_regs(sm, idata);
1353
1354 if (idata->devices & SM501_USE_USB_HOST)
1355 sm501_register_usbhost(sm, &mem_avail);
1356 if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
1357 sm501_register_uart(sm, idata->devices);
1358 if (idata->devices & SM501_USE_GPIO)
1359 sm501_register_gpio(sm);
1360 }
1361
1362 if (pdata && pdata->gpio_i2c && pdata->gpio_i2c_nr > 0) {
1363 if (!sm501_gpio_isregistered(sm))
1364 dev_err(sm->dev, "no gpio available for i2c gpio.\n");
1365 else
1366 sm501_register_gpio_i2c(sm, pdata);
1367 }
1368
1369 ret = sm501_check_clocks(sm);
1370 if (ret) {
1371 dev_err(sm->dev, "M1X and M clocks sourced from different "
1372 "PLLs\n");
1373 return -EINVAL;
1374 }
1375
1376 /* always create a framebuffer */
1377 sm501_register_display(sm, &mem_avail);
1378
1379 return 0;
1380 }
1381
1382 static int sm501_plat_probe(struct platform_device *dev)
1383 {
1384 struct sm501_devdata *sm;
1385 int ret;
1386
1387 sm = kzalloc(sizeof(*sm), GFP_KERNEL);
1388 if (!sm) {
1389 ret = -ENOMEM;
1390 goto err1;
1391 }
1392
1393 sm->dev = &dev->dev;
1394 sm->pdev_id = dev->id;
1395 sm->platdata = dev_get_platdata(&dev->dev);
1396
1397 ret = platform_get_irq(dev, 0);
1398 if (ret < 0) {
1399 dev_err(&dev->dev, "failed to get irq resource\n");
1400 goto err_res;
1401 }
1402 sm->irq = ret;
1403
1404 sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
1405 sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
1406 if (!sm->io_res || !sm->mem_res) {
1407 dev_err(&dev->dev, "failed to get IO resource\n");
1408 ret = -ENOENT;
1409 goto err_res;
1410 }
1411
1412 sm->regs_claim = request_mem_region(sm->io_res->start,
1413 0x100, "sm501");
1414 if (!sm->regs_claim) {
1415 dev_err(&dev->dev, "cannot claim registers\n");
1416 ret = -EBUSY;
1417 goto err_res;
1418 }
1419
1420 platform_set_drvdata(dev, sm);
1421
1422 sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
1423 if (!sm->regs) {
1424 dev_err(&dev->dev, "cannot remap registers\n");
1425 ret = -EIO;
1426 goto err_claim;
1427 }
1428
1429 return sm501_init_dev(sm);
1430
1431 err_claim:
1432 release_resource(sm->regs_claim);
1433 kfree(sm->regs_claim);
1434 err_res:
1435 kfree(sm);
1436 err1:
1437 return ret;
1438
1439 }
1440
1441 #ifdef CONFIG_PM
1442
1443 /* power management support */
1444
1445 static void sm501_set_power(struct sm501_devdata *sm, int on)
1446 {
1447 struct sm501_platdata *pd = sm->platdata;
1448
1449 if (!pd)
1450 return;
1451
1452 if (pd->get_power) {
1453 if (pd->get_power(sm->dev) == on) {
1454 dev_dbg(sm->dev, "is already %d\n", on);
1455 return;
1456 }
1457 }
1458
1459 if (pd->set_power) {
1460 dev_dbg(sm->dev, "setting power to %d\n", on);
1461
1462 pd->set_power(sm->dev, on);
1463 sm501_mdelay(sm, 10);
1464 }
1465 }
1466
1467 static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
1468 {
1469 struct sm501_devdata *sm = platform_get_drvdata(pdev);
1470
1471 sm->in_suspend = 1;
1472 sm->pm_misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
1473
1474 sm501_dump_regs(sm);
1475
1476 if (sm->platdata) {
1477 if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
1478 sm501_set_power(sm, 0);
1479 }
1480
1481 return 0;
1482 }
1483
1484 static int sm501_plat_resume(struct platform_device *pdev)
1485 {
1486 struct sm501_devdata *sm = platform_get_drvdata(pdev);
1487
1488 sm501_set_power(sm, 1);
1489
1490 sm501_dump_regs(sm);
1491 sm501_dump_gate(sm);
1492 sm501_dump_clk(sm);
1493
1494 /* check to see if we are in the same state as when suspended */
1495
1496 if (smc501_readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
1497 dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
1498 smc501_writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
1499
1500 /* our suspend causes the controller state to change,
1501 * either by something attempting setup, power loss,
1502 * or an external reset event on power change */
1503
1504 if (sm->platdata && sm->platdata->init) {
1505 sm501_init_regs(sm, sm->platdata->init);
1506 }
1507 }
1508
1509 /* dump our state from resume */
1510
1511 sm501_dump_regs(sm);
1512 sm501_dump_clk(sm);
1513
1514 sm->in_suspend = 0;
1515
1516 return 0;
1517 }
1518 #else
1519 #define sm501_plat_suspend NULL
1520 #define sm501_plat_resume NULL
1521 #endif
1522
1523 /* Initialisation data for PCI devices */
1524
1525 static struct sm501_initdata sm501_pci_initdata = {
1526 .gpio_high = {
1527 .set = 0x3F000000, /* 24bit panel */
1528 .mask = 0x0,
1529 },
1530 .misc_timing = {
1531 .set = 0x010100, /* SDRAM timing */
1532 .mask = 0x1F1F00,
1533 },
1534 .misc_control = {
1535 .set = SM501_MISC_PNL_24BIT,
1536 .mask = 0,
1537 },
1538
1539 .devices = SM501_USE_ALL,
1540
1541 /* Errata AB-3 says that 72MHz is the fastest available
1542 * for 33MHZ PCI with proper bus-mastering operation */
1543
1544 .mclk = 72 * MHZ,
1545 .m1xclk = 144 * MHZ,
1546 };
1547
1548 static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
1549 .flags = (SM501FB_FLAG_USE_INIT_MODE |
1550 SM501FB_FLAG_USE_HWCURSOR |
1551 SM501FB_FLAG_USE_HWACCEL |
1552 SM501FB_FLAG_DISABLE_AT_EXIT),
1553 };
1554
1555 static struct sm501_platdata_fb sm501_fb_pdata = {
1556 .fb_route = SM501_FB_OWN,
1557 .fb_crt = &sm501_pdata_fbsub,
1558 .fb_pnl = &sm501_pdata_fbsub,
1559 };
1560
1561 static struct sm501_platdata sm501_pci_platdata = {
1562 .init = &sm501_pci_initdata,
1563 .fb = &sm501_fb_pdata,
1564 .gpio_base = -1,
1565 };
1566
1567 static int sm501_pci_probe(struct pci_dev *dev,
1568 const struct pci_device_id *id)
1569 {
1570 struct sm501_devdata *sm;
1571 int err;
1572
1573 sm = kzalloc(sizeof(*sm), GFP_KERNEL);
1574 if (!sm) {
1575 err = -ENOMEM;
1576 goto err1;
1577 }
1578
1579 /* set a default set of platform data */
1580 dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
1581
1582 /* set a hopefully unique id for our child platform devices */
1583 sm->pdev_id = 32 + dev->devfn;
1584
1585 pci_set_drvdata(dev, sm);
1586
1587 err = pci_enable_device(dev);
1588 if (err) {
1589 dev_err(&dev->dev, "cannot enable device\n");
1590 goto err2;
1591 }
1592
1593 sm->dev = &dev->dev;
1594 sm->irq = dev->irq;
1595
1596 #ifdef __BIG_ENDIAN
1597 /* if the system is big-endian, we most probably have a
1598 * translation in the IO layer making the PCI bus little endian
1599 * so make the framebuffer swapped pixels */
1600
1601 sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
1602 #endif
1603
1604 /* check our resources */
1605
1606 if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
1607 dev_err(&dev->dev, "region #0 is not memory?\n");
1608 err = -EINVAL;
1609 goto err3;
1610 }
1611
1612 if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
1613 dev_err(&dev->dev, "region #1 is not memory?\n");
1614 err = -EINVAL;
1615 goto err3;
1616 }
1617
1618 /* make our resources ready for sharing */
1619
1620 sm->io_res = &dev->resource[1];
1621 sm->mem_res = &dev->resource[0];
1622
1623 sm->regs_claim = request_mem_region(sm->io_res->start,
1624 0x100, "sm501");
1625 if (!sm->regs_claim) {
1626 dev_err(&dev->dev, "cannot claim registers\n");
1627 err= -EBUSY;
1628 goto err3;
1629 }
1630
1631 sm->regs = pci_ioremap_bar(dev, 1);
1632 if (!sm->regs) {
1633 dev_err(&dev->dev, "cannot remap registers\n");
1634 err = -EIO;
1635 goto err4;
1636 }
1637
1638 sm501_init_dev(sm);
1639 return 0;
1640
1641 err4:
1642 release_resource(sm->regs_claim);
1643 kfree(sm->regs_claim);
1644 err3:
1645 pci_disable_device(dev);
1646 err2:
1647 kfree(sm);
1648 err1:
1649 return err;
1650 }
1651
1652 static void sm501_remove_sub(struct sm501_devdata *sm,
1653 struct sm501_device *smdev)
1654 {
1655 list_del(&smdev->list);
1656 platform_device_unregister(&smdev->pdev);
1657 }
1658
1659 static void sm501_dev_remove(struct sm501_devdata *sm)
1660 {
1661 struct sm501_device *smdev, *tmp;
1662
1663 list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
1664 sm501_remove_sub(sm, smdev);
1665
1666 device_remove_file(sm->dev, &dev_attr_dbg_regs);
1667
1668 sm501_gpio_remove(sm);
1669 }
1670
1671 static void sm501_pci_remove(struct pci_dev *dev)
1672 {
1673 struct sm501_devdata *sm = pci_get_drvdata(dev);
1674
1675 sm501_dev_remove(sm);
1676 iounmap(sm->regs);
1677
1678 release_resource(sm->regs_claim);
1679 kfree(sm->regs_claim);
1680
1681 pci_disable_device(dev);
1682 }
1683
1684 static int sm501_plat_remove(struct platform_device *dev)
1685 {
1686 struct sm501_devdata *sm = platform_get_drvdata(dev);
1687
1688 sm501_dev_remove(sm);
1689 iounmap(sm->regs);
1690
1691 release_resource(sm->regs_claim);
1692 kfree(sm->regs_claim);
1693
1694 return 0;
1695 }
1696
1697 static const struct pci_device_id sm501_pci_tbl[] = {
1698 { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1699 { 0, },
1700 };
1701
1702 MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
1703
1704 static struct pci_driver sm501_pci_driver = {
1705 .name = "sm501",
1706 .id_table = sm501_pci_tbl,
1707 .probe = sm501_pci_probe,
1708 .remove = sm501_pci_remove,
1709 };
1710
1711 MODULE_ALIAS("platform:sm501");
1712
1713 static const struct of_device_id of_sm501_match_tbl[] = {
1714 { .compatible = "smi,sm501", },
1715 { /* end */ }
1716 };
1717 MODULE_DEVICE_TABLE(of, of_sm501_match_tbl);
1718
1719 static struct platform_driver sm501_plat_driver = {
1720 .driver = {
1721 .name = "sm501",
1722 .of_match_table = of_sm501_match_tbl,
1723 },
1724 .probe = sm501_plat_probe,
1725 .remove = sm501_plat_remove,
1726 .suspend = sm501_plat_suspend,
1727 .resume = sm501_plat_resume,
1728 };
1729
1730 static int __init sm501_base_init(void)
1731 {
1732 platform_driver_register(&sm501_plat_driver);
1733 return pci_register_driver(&sm501_pci_driver);
1734 }
1735
1736 static void __exit sm501_base_exit(void)
1737 {
1738 platform_driver_unregister(&sm501_plat_driver);
1739 pci_unregister_driver(&sm501_pci_driver);
1740 }
1741
1742 module_init(sm501_base_init);
1743 module_exit(sm501_base_exit);
1744
1745 MODULE_DESCRIPTION("SM501 Core Driver");
1746 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
1747 MODULE_LICENSE("GPL v2");
Linux with added FPC-III support