2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
10 * Cross Partition Communication (XPC) support - standard version.
12 * XPC provides a message passing capability that crosses partition
13 * boundaries. This module is made up of two parts:
15 * partition This part detects the presence/absence of other
16 * partitions. It provides a heartbeat and monitors
17 * the heartbeats of other partitions.
19 * channel This part manages the channels and sends/receives
20 * messages across them to/from other partitions.
22 * There are a couple of additional functions residing in XP, which
23 * provide an interface to XPC for its users.
28 * . Currently on sn2, we have no way to determine which nasid an IRQ
29 * came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
30 * followed by an IPI. The amo indicates where data is to be pulled
31 * from, so after the IPI arrives, the remote partition checks the amo
32 * word. The IPI can actually arrive before the amo however, so other
33 * code must periodically check for this case. Also, remote amo
34 * operations do not reliably time out. Thus we do a remote PIO read
35 * solely to know whether the remote partition is down and whether we
36 * should stop sending IPIs to it. This remote PIO read operation is
37 * set up in a special nofault region so SAL knows to ignore (and
38 * cleanup) any errors due to the remote amo write, PIO read, and/or
39 * PIO write operations.
41 * If/when new hardware solves this IPI problem, we should abandon
42 * the current approach.
46 #include <linux/module.h>
47 #include <linux/slab.h>
48 #include <linux/sysctl.h>
49 #include <linux/device.h>
50 #include <linux/delay.h>
51 #include <linux/reboot.h>
52 #include <linux/kdebug.h>
53 #include <linux/kthread.h>
57 #include <asm/traps.h>
60 /* define two XPC debug device structures to be used with dev_dbg() et al */
62 struct device_driver xpc_dbg_name
= {
66 struct device xpc_part_dbg_subname
= {
67 .init_name
= "", /* set to "part" at xpc_init() time */
68 .driver
= &xpc_dbg_name
71 struct device xpc_chan_dbg_subname
= {
72 .init_name
= "", /* set to "chan" at xpc_init() time */
73 .driver
= &xpc_dbg_name
76 struct device
*xpc_part
= &xpc_part_dbg_subname
;
77 struct device
*xpc_chan
= &xpc_chan_dbg_subname
;
79 static int xpc_kdebug_ignore
;
81 /* systune related variables for /proc/sys directories */
83 static int xpc_hb_interval
= XPC_HB_DEFAULT_INTERVAL
;
84 static int xpc_hb_min_interval
= 1;
85 static int xpc_hb_max_interval
= 10;
87 static int xpc_hb_check_interval
= XPC_HB_CHECK_DEFAULT_INTERVAL
;
88 static int xpc_hb_check_min_interval
= 10;
89 static int xpc_hb_check_max_interval
= 120;
91 int xpc_disengage_timelimit
= XPC_DISENGAGE_DEFAULT_TIMELIMIT
;
92 static int xpc_disengage_min_timelimit
; /* = 0 */
93 static int xpc_disengage_max_timelimit
= 120;
95 static struct ctl_table xpc_sys_xpc_hb_dir
[] = {
97 .procname
= "hb_interval",
98 .data
= &xpc_hb_interval
,
99 .maxlen
= sizeof(int),
101 .proc_handler
= proc_dointvec_minmax
,
102 .extra1
= &xpc_hb_min_interval
,
103 .extra2
= &xpc_hb_max_interval
},
105 .procname
= "hb_check_interval",
106 .data
= &xpc_hb_check_interval
,
107 .maxlen
= sizeof(int),
109 .proc_handler
= proc_dointvec_minmax
,
110 .extra1
= &xpc_hb_check_min_interval
,
111 .extra2
= &xpc_hb_check_max_interval
},
114 static struct ctl_table xpc_sys_xpc_dir
[] = {
118 .child
= xpc_sys_xpc_hb_dir
},
120 .procname
= "disengage_timelimit",
121 .data
= &xpc_disengage_timelimit
,
122 .maxlen
= sizeof(int),
124 .proc_handler
= proc_dointvec_minmax
,
125 .extra1
= &xpc_disengage_min_timelimit
,
126 .extra2
= &xpc_disengage_max_timelimit
},
129 static struct ctl_table xpc_sys_dir
[] = {
133 .child
= xpc_sys_xpc_dir
},
136 static struct ctl_table_header
*xpc_sysctl
;
138 /* non-zero if any remote partition disengage was timed out */
139 int xpc_disengage_timedout
;
141 /* #of activate IRQs received and not yet processed */
142 int xpc_activate_IRQ_rcvd
;
143 DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock
);
145 /* IRQ handler notifies this wait queue on receipt of an IRQ */
146 DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq
);
148 static unsigned long xpc_hb_check_timeout
;
149 static struct timer_list xpc_hb_timer
;
151 /* notification that the xpc_hb_checker thread has exited */
152 static DECLARE_COMPLETION(xpc_hb_checker_exited
);
154 /* notification that the xpc_discovery thread has exited */
155 static DECLARE_COMPLETION(xpc_discovery_exited
);
157 static void xpc_kthread_waitmsgs(struct xpc_partition
*, struct xpc_channel
*);
159 static int xpc_system_reboot(struct notifier_block
*, unsigned long, void *);
160 static struct notifier_block xpc_reboot_notifier
= {
161 .notifier_call
= xpc_system_reboot
,
164 static int xpc_system_die(struct notifier_block
*, unsigned long, void *);
165 static struct notifier_block xpc_die_notifier
= {
166 .notifier_call
= xpc_system_die
,
169 struct xpc_arch_operations xpc_arch_ops
;
172 * Timer function to enforce the timelimit on the partition disengage.
175 xpc_timeout_partition_disengage(struct timer_list
*t
)
177 struct xpc_partition
*part
= from_timer(part
, t
, disengage_timer
);
179 DBUG_ON(time_is_after_jiffies(part
->disengage_timeout
));
181 (void)xpc_partition_disengaged(part
);
183 DBUG_ON(part
->disengage_timeout
!= 0);
184 DBUG_ON(xpc_arch_ops
.partition_engaged(XPC_PARTID(part
)));
188 * Timer to produce the heartbeat. The timer structures function is
189 * already set when this is initially called. A tunable is used to
190 * specify when the next timeout should occur.
193 xpc_hb_beater(struct timer_list
*unused
)
195 xpc_arch_ops
.increment_heartbeat();
197 if (time_is_before_eq_jiffies(xpc_hb_check_timeout
))
198 wake_up_interruptible(&xpc_activate_IRQ_wq
);
200 xpc_hb_timer
.expires
= jiffies
+ (xpc_hb_interval
* HZ
);
201 add_timer(&xpc_hb_timer
);
205 xpc_start_hb_beater(void)
207 xpc_arch_ops
.heartbeat_init();
208 timer_setup(&xpc_hb_timer
, xpc_hb_beater
, 0);
213 xpc_stop_hb_beater(void)
215 del_timer_sync(&xpc_hb_timer
);
216 xpc_arch_ops
.heartbeat_exit();
220 * At periodic intervals, scan through all active partitions and ensure
221 * their heartbeat is still active. If not, the partition is deactivated.
224 xpc_check_remote_hb(void)
226 struct xpc_partition
*part
;
230 for (partid
= 0; partid
< xp_max_npartitions
; partid
++) {
235 if (partid
== xp_partition_id
)
238 part
= &xpc_partitions
[partid
];
240 if (part
->act_state
== XPC_P_AS_INACTIVE
||
241 part
->act_state
== XPC_P_AS_DEACTIVATING
) {
245 ret
= xpc_arch_ops
.get_remote_heartbeat(part
);
246 if (ret
!= xpSuccess
)
247 XPC_DEACTIVATE_PARTITION(part
, ret
);
252 * This thread is responsible for nearly all of the partition
253 * activation/deactivation.
256 xpc_hb_checker(void *ignore
)
260 /* this thread was marked active by xpc_hb_init() */
262 set_cpus_allowed_ptr(current
, cpumask_of(XPC_HB_CHECK_CPU
));
264 /* set our heartbeating to other partitions into motion */
265 xpc_hb_check_timeout
= jiffies
+ (xpc_hb_check_interval
* HZ
);
266 xpc_start_hb_beater();
268 while (!xpc_exiting
) {
270 dev_dbg(xpc_part
, "woke up with %d ticks rem; %d IRQs have "
272 (int)(xpc_hb_check_timeout
- jiffies
),
273 xpc_activate_IRQ_rcvd
);
275 /* checking of remote heartbeats is skewed by IRQ handling */
276 if (time_is_before_eq_jiffies(xpc_hb_check_timeout
)) {
277 xpc_hb_check_timeout
= jiffies
+
278 (xpc_hb_check_interval
* HZ
);
280 dev_dbg(xpc_part
, "checking remote heartbeats\n");
281 xpc_check_remote_hb();
284 * On sn2 we need to periodically recheck to ensure no
285 * IRQ/amo pairs have been missed.
291 /* check for outstanding IRQs */
292 if (xpc_activate_IRQ_rcvd
> 0 || force_IRQ
!= 0) {
294 dev_dbg(xpc_part
, "processing activate IRQs "
296 xpc_arch_ops
.process_activate_IRQ_rcvd();
299 /* wait for IRQ or timeout */
300 (void)wait_event_interruptible(xpc_activate_IRQ_wq
,
301 (time_is_before_eq_jiffies(
302 xpc_hb_check_timeout
) ||
303 xpc_activate_IRQ_rcvd
> 0 ||
307 xpc_stop_hb_beater();
309 dev_dbg(xpc_part
, "heartbeat checker is exiting\n");
311 /* mark this thread as having exited */
312 complete(&xpc_hb_checker_exited
);
317 * This thread will attempt to discover other partitions to activate
318 * based on info provided by SAL. This new thread is short lived and
319 * will exit once discovery is complete.
322 xpc_initiate_discovery(void *ignore
)
326 dev_dbg(xpc_part
, "discovery thread is exiting\n");
328 /* mark this thread as having exited */
329 complete(&xpc_discovery_exited
);
334 * The first kthread assigned to a newly activated partition is the one
335 * created by XPC HB with which it calls xpc_activating(). XPC hangs on to
336 * that kthread until the partition is brought down, at which time that kthread
337 * returns back to XPC HB. (The return of that kthread will signify to XPC HB
338 * that XPC has dismantled all communication infrastructure for the associated
339 * partition.) This kthread becomes the channel manager for that partition.
341 * Each active partition has a channel manager, who, besides connecting and
342 * disconnecting channels, will ensure that each of the partition's connected
343 * channels has the required number of assigned kthreads to get the work done.
346 xpc_channel_mgr(struct xpc_partition
*part
)
348 while (part
->act_state
!= XPC_P_AS_DEACTIVATING
||
349 atomic_read(&part
->nchannels_active
) > 0 ||
350 !xpc_partition_disengaged(part
)) {
352 xpc_process_sent_chctl_flags(part
);
355 * Wait until we've been requested to activate kthreads or
356 * all of the channel's message queues have been torn down or
357 * a signal is pending.
359 * The channel_mgr_requests is set to 1 after being awakened,
360 * This is done to prevent the channel mgr from making one pass
361 * through the loop for each request, since he will
362 * be servicing all the requests in one pass. The reason it's
363 * set to 1 instead of 0 is so that other kthreads will know
364 * that the channel mgr is running and won't bother trying to
367 atomic_dec(&part
->channel_mgr_requests
);
368 (void)wait_event_interruptible(part
->channel_mgr_wq
,
369 (atomic_read(&part
->channel_mgr_requests
) > 0 ||
370 part
->chctl
.all_flags
!= 0 ||
371 (part
->act_state
== XPC_P_AS_DEACTIVATING
&&
372 atomic_read(&part
->nchannels_active
) == 0 &&
373 xpc_partition_disengaged(part
))));
374 atomic_set(&part
->channel_mgr_requests
, 1);
379 * Guarantee that the kzalloc'd memory is cacheline aligned.
382 xpc_kzalloc_cacheline_aligned(size_t size
, gfp_t flags
, void **base
)
384 /* see if kzalloc will give us cachline aligned memory by default */
385 *base
= kzalloc(size
, flags
);
389 if ((u64
)*base
== L1_CACHE_ALIGN((u64
)*base
))
394 /* nope, we'll have to do it ourselves */
395 *base
= kzalloc(size
+ L1_CACHE_BYTES
, flags
);
399 return (void *)L1_CACHE_ALIGN((u64
)*base
);
403 * Setup the channel structures necessary to support XPartition Communication
404 * between the specified remote partition and the local one.
406 static enum xp_retval
407 xpc_setup_ch_structures(struct xpc_partition
*part
)
411 struct xpc_channel
*ch
;
412 short partid
= XPC_PARTID(part
);
415 * Allocate all of the channel structures as a contiguous chunk of
418 DBUG_ON(part
->channels
!= NULL
);
419 part
->channels
= kcalloc(XPC_MAX_NCHANNELS
,
420 sizeof(struct xpc_channel
),
422 if (part
->channels
== NULL
) {
423 dev_err(xpc_chan
, "can't get memory for channels\n");
427 /* allocate the remote open and close args */
429 part
->remote_openclose_args
=
430 xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE
,
432 remote_openclose_args_base
);
433 if (part
->remote_openclose_args
== NULL
) {
434 dev_err(xpc_chan
, "can't get memory for remote connect args\n");
439 part
->chctl
.all_flags
= 0;
440 spin_lock_init(&part
->chctl_lock
);
442 atomic_set(&part
->channel_mgr_requests
, 1);
443 init_waitqueue_head(&part
->channel_mgr_wq
);
445 part
->nchannels
= XPC_MAX_NCHANNELS
;
447 atomic_set(&part
->nchannels_active
, 0);
448 atomic_set(&part
->nchannels_engaged
, 0);
450 for (ch_number
= 0; ch_number
< part
->nchannels
; ch_number
++) {
451 ch
= &part
->channels
[ch_number
];
454 ch
->number
= ch_number
;
455 ch
->flags
= XPC_C_DISCONNECTED
;
457 atomic_set(&ch
->kthreads_assigned
, 0);
458 atomic_set(&ch
->kthreads_idle
, 0);
459 atomic_set(&ch
->kthreads_active
, 0);
461 atomic_set(&ch
->references
, 0);
462 atomic_set(&ch
->n_to_notify
, 0);
464 spin_lock_init(&ch
->lock
);
465 init_completion(&ch
->wdisconnect_wait
);
467 atomic_set(&ch
->n_on_msg_allocate_wq
, 0);
468 init_waitqueue_head(&ch
->msg_allocate_wq
);
469 init_waitqueue_head(&ch
->idle_wq
);
472 ret
= xpc_arch_ops
.setup_ch_structures(part
);
473 if (ret
!= xpSuccess
)
477 * With the setting of the partition setup_state to XPC_P_SS_SETUP,
478 * we're declaring that this partition is ready to go.
480 part
->setup_state
= XPC_P_SS_SETUP
;
484 /* setup of ch structures failed */
486 kfree(part
->remote_openclose_args_base
);
487 part
->remote_openclose_args
= NULL
;
489 kfree(part
->channels
);
490 part
->channels
= NULL
;
495 * Teardown the channel structures necessary to support XPartition Communication
496 * between the specified remote partition and the local one.
499 xpc_teardown_ch_structures(struct xpc_partition
*part
)
501 DBUG_ON(atomic_read(&part
->nchannels_engaged
) != 0);
502 DBUG_ON(atomic_read(&part
->nchannels_active
) != 0);
505 * Make this partition inaccessible to local processes by marking it
506 * as no longer setup. Then wait before proceeding with the teardown
507 * until all existing references cease.
509 DBUG_ON(part
->setup_state
!= XPC_P_SS_SETUP
);
510 part
->setup_state
= XPC_P_SS_WTEARDOWN
;
512 wait_event(part
->teardown_wq
, (atomic_read(&part
->references
) == 0));
514 /* now we can begin tearing down the infrastructure */
516 xpc_arch_ops
.teardown_ch_structures(part
);
518 kfree(part
->remote_openclose_args_base
);
519 part
->remote_openclose_args
= NULL
;
520 kfree(part
->channels
);
521 part
->channels
= NULL
;
523 part
->setup_state
= XPC_P_SS_TORNDOWN
;
527 * When XPC HB determines that a partition has come up, it will create a new
528 * kthread and that kthread will call this function to attempt to set up the
529 * basic infrastructure used for Cross Partition Communication with the newly
532 * The kthread that was created by XPC HB and which setup the XPC
533 * infrastructure will remain assigned to the partition becoming the channel
534 * manager for that partition until the partition is deactivating, at which
535 * time the kthread will teardown the XPC infrastructure and then exit.
538 xpc_activating(void *__partid
)
540 short partid
= (u64
)__partid
;
541 struct xpc_partition
*part
= &xpc_partitions
[partid
];
542 unsigned long irq_flags
;
544 DBUG_ON(partid
< 0 || partid
>= xp_max_npartitions
);
546 spin_lock_irqsave(&part
->act_lock
, irq_flags
);
548 if (part
->act_state
== XPC_P_AS_DEACTIVATING
) {
549 part
->act_state
= XPC_P_AS_INACTIVE
;
550 spin_unlock_irqrestore(&part
->act_lock
, irq_flags
);
551 part
->remote_rp_pa
= 0;
555 /* indicate the thread is activating */
556 DBUG_ON(part
->act_state
!= XPC_P_AS_ACTIVATION_REQ
);
557 part
->act_state
= XPC_P_AS_ACTIVATING
;
559 XPC_SET_REASON(part
, 0, 0);
560 spin_unlock_irqrestore(&part
->act_lock
, irq_flags
);
562 dev_dbg(xpc_part
, "activating partition %d\n", partid
);
564 xpc_arch_ops
.allow_hb(partid
);
566 if (xpc_setup_ch_structures(part
) == xpSuccess
) {
567 (void)xpc_part_ref(part
); /* this will always succeed */
569 if (xpc_arch_ops
.make_first_contact(part
) == xpSuccess
) {
570 xpc_mark_partition_active(part
);
571 xpc_channel_mgr(part
);
572 /* won't return until partition is deactivating */
575 xpc_part_deref(part
);
576 xpc_teardown_ch_structures(part
);
579 xpc_arch_ops
.disallow_hb(partid
);
580 xpc_mark_partition_inactive(part
);
582 if (part
->reason
== xpReactivating
) {
583 /* interrupting ourselves results in activating partition */
584 xpc_arch_ops
.request_partition_reactivation(part
);
591 xpc_activate_partition(struct xpc_partition
*part
)
593 short partid
= XPC_PARTID(part
);
594 unsigned long irq_flags
;
595 struct task_struct
*kthread
;
597 spin_lock_irqsave(&part
->act_lock
, irq_flags
);
599 DBUG_ON(part
->act_state
!= XPC_P_AS_INACTIVE
);
601 part
->act_state
= XPC_P_AS_ACTIVATION_REQ
;
602 XPC_SET_REASON(part
, xpCloneKThread
, __LINE__
);
604 spin_unlock_irqrestore(&part
->act_lock
, irq_flags
);
606 kthread
= kthread_run(xpc_activating
, (void *)((u64
)partid
), "xpc%02d",
608 if (IS_ERR(kthread
)) {
609 spin_lock_irqsave(&part
->act_lock
, irq_flags
);
610 part
->act_state
= XPC_P_AS_INACTIVE
;
611 XPC_SET_REASON(part
, xpCloneKThreadFailed
, __LINE__
);
612 spin_unlock_irqrestore(&part
->act_lock
, irq_flags
);
617 xpc_activate_kthreads(struct xpc_channel
*ch
, int needed
)
619 int idle
= atomic_read(&ch
->kthreads_idle
);
620 int assigned
= atomic_read(&ch
->kthreads_assigned
);
623 DBUG_ON(needed
<= 0);
626 wakeup
= (needed
> idle
) ? idle
: needed
;
629 dev_dbg(xpc_chan
, "wakeup %d idle kthreads, partid=%d, "
630 "channel=%d\n", wakeup
, ch
->partid
, ch
->number
);
632 /* only wakeup the requested number of kthreads */
633 wake_up_nr(&ch
->idle_wq
, wakeup
);
639 if (needed
+ assigned
> ch
->kthreads_assigned_limit
) {
640 needed
= ch
->kthreads_assigned_limit
- assigned
;
645 dev_dbg(xpc_chan
, "create %d new kthreads, partid=%d, channel=%d\n",
646 needed
, ch
->partid
, ch
->number
);
648 xpc_create_kthreads(ch
, needed
, 0);
652 * This function is where XPC's kthreads wait for messages to deliver.
655 xpc_kthread_waitmsgs(struct xpc_partition
*part
, struct xpc_channel
*ch
)
657 int (*n_of_deliverable_payloads
) (struct xpc_channel
*) =
658 xpc_arch_ops
.n_of_deliverable_payloads
;
661 /* deliver messages to their intended recipients */
663 while (n_of_deliverable_payloads(ch
) > 0 &&
664 !(ch
->flags
& XPC_C_DISCONNECTING
)) {
665 xpc_deliver_payload(ch
);
668 if (atomic_inc_return(&ch
->kthreads_idle
) >
669 ch
->kthreads_idle_limit
) {
670 /* too many idle kthreads on this channel */
671 atomic_dec(&ch
->kthreads_idle
);
675 dev_dbg(xpc_chan
, "idle kthread calling "
676 "wait_event_interruptible_exclusive()\n");
678 (void)wait_event_interruptible_exclusive(ch
->idle_wq
,
679 (n_of_deliverable_payloads(ch
) > 0 ||
680 (ch
->flags
& XPC_C_DISCONNECTING
)));
682 atomic_dec(&ch
->kthreads_idle
);
684 } while (!(ch
->flags
& XPC_C_DISCONNECTING
));
688 xpc_kthread_start(void *args
)
690 short partid
= XPC_UNPACK_ARG1(args
);
691 u16 ch_number
= XPC_UNPACK_ARG2(args
);
692 struct xpc_partition
*part
= &xpc_partitions
[partid
];
693 struct xpc_channel
*ch
;
695 unsigned long irq_flags
;
696 int (*n_of_deliverable_payloads
) (struct xpc_channel
*) =
697 xpc_arch_ops
.n_of_deliverable_payloads
;
699 dev_dbg(xpc_chan
, "kthread starting, partid=%d, channel=%d\n",
702 ch
= &part
->channels
[ch_number
];
704 if (!(ch
->flags
& XPC_C_DISCONNECTING
)) {
706 /* let registerer know that connection has been established */
708 spin_lock_irqsave(&ch
->lock
, irq_flags
);
709 if (!(ch
->flags
& XPC_C_CONNECTEDCALLOUT
)) {
710 ch
->flags
|= XPC_C_CONNECTEDCALLOUT
;
711 spin_unlock_irqrestore(&ch
->lock
, irq_flags
);
713 xpc_connected_callout(ch
);
715 spin_lock_irqsave(&ch
->lock
, irq_flags
);
716 ch
->flags
|= XPC_C_CONNECTEDCALLOUT_MADE
;
717 spin_unlock_irqrestore(&ch
->lock
, irq_flags
);
720 * It is possible that while the callout was being
721 * made that the remote partition sent some messages.
722 * If that is the case, we may need to activate
723 * additional kthreads to help deliver them. We only
724 * need one less than total #of messages to deliver.
726 n_needed
= n_of_deliverable_payloads(ch
) - 1;
727 if (n_needed
> 0 && !(ch
->flags
& XPC_C_DISCONNECTING
))
728 xpc_activate_kthreads(ch
, n_needed
);
731 spin_unlock_irqrestore(&ch
->lock
, irq_flags
);
734 xpc_kthread_waitmsgs(part
, ch
);
737 /* let registerer know that connection is disconnecting */
739 spin_lock_irqsave(&ch
->lock
, irq_flags
);
740 if ((ch
->flags
& XPC_C_CONNECTEDCALLOUT_MADE
) &&
741 !(ch
->flags
& XPC_C_DISCONNECTINGCALLOUT
)) {
742 ch
->flags
|= XPC_C_DISCONNECTINGCALLOUT
;
743 spin_unlock_irqrestore(&ch
->lock
, irq_flags
);
745 xpc_disconnect_callout(ch
, xpDisconnecting
);
747 spin_lock_irqsave(&ch
->lock
, irq_flags
);
748 ch
->flags
|= XPC_C_DISCONNECTINGCALLOUT_MADE
;
750 spin_unlock_irqrestore(&ch
->lock
, irq_flags
);
752 if (atomic_dec_return(&ch
->kthreads_assigned
) == 0 &&
753 atomic_dec_return(&part
->nchannels_engaged
) == 0) {
754 xpc_arch_ops
.indicate_partition_disengaged(part
);
757 xpc_msgqueue_deref(ch
);
759 dev_dbg(xpc_chan
, "kthread exiting, partid=%d, channel=%d\n",
762 xpc_part_deref(part
);
767 * For each partition that XPC has established communications with, there is
768 * a minimum of one kernel thread assigned to perform any operation that
769 * may potentially sleep or block (basically the callouts to the asynchronous
770 * functions registered via xpc_connect()).
772 * Additional kthreads are created and destroyed by XPC as the workload
775 * A kthread is assigned to one of the active channels that exists for a given
779 xpc_create_kthreads(struct xpc_channel
*ch
, int needed
,
780 int ignore_disconnecting
)
782 unsigned long irq_flags
;
783 u64 args
= XPC_PACK_ARGS(ch
->partid
, ch
->number
);
784 struct xpc_partition
*part
= &xpc_partitions
[ch
->partid
];
785 struct task_struct
*kthread
;
786 void (*indicate_partition_disengaged
) (struct xpc_partition
*) =
787 xpc_arch_ops
.indicate_partition_disengaged
;
789 while (needed
-- > 0) {
792 * The following is done on behalf of the newly created
793 * kthread. That kthread is responsible for doing the
794 * counterpart to the following before it exits.
796 if (ignore_disconnecting
) {
797 if (!atomic_inc_not_zero(&ch
->kthreads_assigned
)) {
798 /* kthreads assigned had gone to zero */
800 XPC_C_DISCONNECTINGCALLOUT_MADE
));
804 } else if (ch
->flags
& XPC_C_DISCONNECTING
) {
807 } else if (atomic_inc_return(&ch
->kthreads_assigned
) == 1 &&
808 atomic_inc_return(&part
->nchannels_engaged
) == 1) {
809 xpc_arch_ops
.indicate_partition_engaged(part
);
811 (void)xpc_part_ref(part
);
812 xpc_msgqueue_ref(ch
);
814 kthread
= kthread_run(xpc_kthread_start
, (void *)args
,
815 "xpc%02dc%d", ch
->partid
, ch
->number
);
816 if (IS_ERR(kthread
)) {
817 /* the fork failed */
820 * NOTE: if (ignore_disconnecting &&
821 * !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true,
822 * then we'll deadlock if all other kthreads assigned
823 * to this channel are blocked in the channel's
824 * registerer, because the only thing that will unblock
825 * them is the xpDisconnecting callout that this
826 * failed kthread_run() would have made.
829 if (atomic_dec_return(&ch
->kthreads_assigned
) == 0 &&
830 atomic_dec_return(&part
->nchannels_engaged
) == 0) {
831 indicate_partition_disengaged(part
);
833 xpc_msgqueue_deref(ch
);
834 xpc_part_deref(part
);
836 if (atomic_read(&ch
->kthreads_assigned
) <
837 ch
->kthreads_idle_limit
) {
839 * Flag this as an error only if we have an
840 * insufficient #of kthreads for the channel
843 spin_lock_irqsave(&ch
->lock
, irq_flags
);
844 XPC_DISCONNECT_CHANNEL(ch
, xpLackOfResources
,
846 spin_unlock_irqrestore(&ch
->lock
, irq_flags
);
854 xpc_disconnect_wait(int ch_number
)
856 unsigned long irq_flags
;
858 struct xpc_partition
*part
;
859 struct xpc_channel
*ch
;
860 int wakeup_channel_mgr
;
862 /* now wait for all callouts to the caller's function to cease */
863 for (partid
= 0; partid
< xp_max_npartitions
; partid
++) {
864 part
= &xpc_partitions
[partid
];
866 if (!xpc_part_ref(part
))
869 ch
= &part
->channels
[ch_number
];
871 if (!(ch
->flags
& XPC_C_WDISCONNECT
)) {
872 xpc_part_deref(part
);
876 wait_for_completion(&ch
->wdisconnect_wait
);
878 spin_lock_irqsave(&ch
->lock
, irq_flags
);
879 DBUG_ON(!(ch
->flags
& XPC_C_DISCONNECTED
));
880 wakeup_channel_mgr
= 0;
882 if (ch
->delayed_chctl_flags
) {
883 if (part
->act_state
!= XPC_P_AS_DEACTIVATING
) {
884 spin_lock(&part
->chctl_lock
);
885 part
->chctl
.flags
[ch
->number
] |=
886 ch
->delayed_chctl_flags
;
887 spin_unlock(&part
->chctl_lock
);
888 wakeup_channel_mgr
= 1;
890 ch
->delayed_chctl_flags
= 0;
893 ch
->flags
&= ~XPC_C_WDISCONNECT
;
894 spin_unlock_irqrestore(&ch
->lock
, irq_flags
);
896 if (wakeup_channel_mgr
)
897 xpc_wakeup_channel_mgr(part
);
899 xpc_part_deref(part
);
904 xpc_setup_partitions(void)
907 struct xpc_partition
*part
;
909 xpc_partitions
= kcalloc(xp_max_npartitions
,
910 sizeof(struct xpc_partition
),
912 if (xpc_partitions
== NULL
) {
913 dev_err(xpc_part
, "can't get memory for partition structure\n");
918 * The first few fields of each entry of xpc_partitions[] need to
919 * be initialized now so that calls to xpc_connect() and
920 * xpc_disconnect() can be made prior to the activation of any remote
921 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
922 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
923 * PARTITION HAS BEEN ACTIVATED.
925 for (partid
= 0; partid
< xp_max_npartitions
; partid
++) {
926 part
= &xpc_partitions
[partid
];
928 DBUG_ON((u64
)part
!= L1_CACHE_ALIGN((u64
)part
));
930 part
->activate_IRQ_rcvd
= 0;
931 spin_lock_init(&part
->act_lock
);
932 part
->act_state
= XPC_P_AS_INACTIVE
;
933 XPC_SET_REASON(part
, 0, 0);
935 timer_setup(&part
->disengage_timer
,
936 xpc_timeout_partition_disengage
, 0);
938 part
->setup_state
= XPC_P_SS_UNSET
;
939 init_waitqueue_head(&part
->teardown_wq
);
940 atomic_set(&part
->references
, 0);
943 return xpc_arch_ops
.setup_partitions();
947 xpc_teardown_partitions(void)
949 xpc_arch_ops
.teardown_partitions();
950 kfree(xpc_partitions
);
954 xpc_do_exit(enum xp_retval reason
)
957 int active_part_count
, printed_waiting_msg
= 0;
958 struct xpc_partition
*part
;
959 unsigned long printmsg_time
, disengage_timeout
= 0;
961 /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
962 DBUG_ON(xpc_exiting
== 1);
965 * Let the heartbeat checker thread and the discovery thread
966 * (if one is running) know that they should exit. Also wake up
967 * the heartbeat checker thread in case it's sleeping.
970 wake_up_interruptible(&xpc_activate_IRQ_wq
);
972 /* wait for the discovery thread to exit */
973 wait_for_completion(&xpc_discovery_exited
);
975 /* wait for the heartbeat checker thread to exit */
976 wait_for_completion(&xpc_hb_checker_exited
);
978 /* sleep for a 1/3 of a second or so */
979 (void)msleep_interruptible(300);
981 /* wait for all partitions to become inactive */
983 printmsg_time
= jiffies
+ (XPC_DEACTIVATE_PRINTMSG_INTERVAL
* HZ
);
984 xpc_disengage_timedout
= 0;
987 active_part_count
= 0;
989 for (partid
= 0; partid
< xp_max_npartitions
; partid
++) {
990 part
= &xpc_partitions
[partid
];
992 if (xpc_partition_disengaged(part
) &&
993 part
->act_state
== XPC_P_AS_INACTIVE
) {
999 XPC_DEACTIVATE_PARTITION(part
, reason
);
1001 if (part
->disengage_timeout
> disengage_timeout
)
1002 disengage_timeout
= part
->disengage_timeout
;
1005 if (xpc_arch_ops
.any_partition_engaged()) {
1006 if (time_is_before_jiffies(printmsg_time
)) {
1007 dev_info(xpc_part
, "waiting for remote "
1008 "partitions to deactivate, timeout in "
1009 "%ld seconds\n", (disengage_timeout
-
1011 printmsg_time
= jiffies
+
1012 (XPC_DEACTIVATE_PRINTMSG_INTERVAL
* HZ
);
1013 printed_waiting_msg
= 1;
1016 } else if (active_part_count
> 0) {
1017 if (printed_waiting_msg
) {
1018 dev_info(xpc_part
, "waiting for local partition"
1019 " to deactivate\n");
1020 printed_waiting_msg
= 0;
1024 if (!xpc_disengage_timedout
) {
1025 dev_info(xpc_part
, "all partitions have "
1031 /* sleep for a 1/3 of a second or so */
1032 (void)msleep_interruptible(300);
1036 DBUG_ON(xpc_arch_ops
.any_partition_engaged());
1038 xpc_teardown_rsvd_page();
1040 if (reason
== xpUnloading
) {
1041 (void)unregister_die_notifier(&xpc_die_notifier
);
1042 (void)unregister_reboot_notifier(&xpc_reboot_notifier
);
1045 /* clear the interface to XPC's functions */
1046 xpc_clear_interface();
1049 unregister_sysctl_table(xpc_sysctl
);
1051 xpc_teardown_partitions();
1060 * This function is called when the system is being rebooted.
1063 xpc_system_reboot(struct notifier_block
*nb
, unsigned long event
, void *unused
)
1065 enum xp_retval reason
;
1069 reason
= xpSystemReboot
;
1072 reason
= xpSystemHalt
;
1075 reason
= xpSystemPoweroff
;
1078 reason
= xpSystemGoingDown
;
1081 xpc_do_exit(reason
);
1085 /* Used to only allow one cpu to complete disconnect */
1086 static unsigned int xpc_die_disconnecting
;
1089 * Notify other partitions to deactivate from us by first disengaging from all
1090 * references to our memory.
1093 xpc_die_deactivate(void)
1095 struct xpc_partition
*part
;
1101 if (cmpxchg(&xpc_die_disconnecting
, 0, 1))
1104 /* keep xpc_hb_checker thread from doing anything (just in case) */
1107 xpc_arch_ops
.disallow_all_hbs(); /*indicate we're deactivated */
1109 for (partid
= 0; partid
< xp_max_npartitions
; partid
++) {
1110 part
= &xpc_partitions
[partid
];
1112 if (xpc_arch_ops
.partition_engaged(partid
) ||
1113 part
->act_state
!= XPC_P_AS_INACTIVE
) {
1114 xpc_arch_ops
.request_partition_deactivation(part
);
1115 xpc_arch_ops
.indicate_partition_disengaged(part
);
1120 * Though we requested that all other partitions deactivate from us,
1121 * we only wait until they've all disengaged or we've reached the
1122 * defined timelimit.
1124 * Given that one iteration through the following while-loop takes
1125 * approximately 200 microseconds, calculate the #of loops to take
1126 * before bailing and the #of loops before printing a waiting message.
1128 keep_waiting
= xpc_disengage_timelimit
* 1000 * 5;
1129 wait_to_print
= XPC_DEACTIVATE_PRINTMSG_INTERVAL
* 1000 * 5;
1132 any_engaged
= xpc_arch_ops
.any_partition_engaged();
1134 dev_info(xpc_part
, "all partitions have deactivated\n");
1138 if (!keep_waiting
--) {
1139 for (partid
= 0; partid
< xp_max_npartitions
;
1141 if (xpc_arch_ops
.partition_engaged(partid
)) {
1142 dev_info(xpc_part
, "deactivate from "
1143 "remote partition %d timed "
1150 if (!wait_to_print
--) {
1151 dev_info(xpc_part
, "waiting for remote partitions to "
1152 "deactivate, timeout in %ld seconds\n",
1153 keep_waiting
/ (1000 * 5));
1154 wait_to_print
= XPC_DEACTIVATE_PRINTMSG_INTERVAL
*
1163 * This function is called when the system is being restarted or halted due
1164 * to some sort of system failure. If this is the case we need to notify the
1165 * other partitions to disengage from all references to our memory.
1166 * This function can also be called when our heartbeater could be offlined
1167 * for a time. In this case we need to notify other partitions to not worry
1168 * about the lack of a heartbeat.
1171 xpc_system_die(struct notifier_block
*nb
, unsigned long event
, void *_die_args
)
1173 #ifdef CONFIG_IA64 /* !!! temporary kludge */
1175 case DIE_MACHINE_RESTART
:
1176 case DIE_MACHINE_HALT
:
1177 xpc_die_deactivate();
1180 case DIE_KDEBUG_ENTER
:
1181 /* Should lack of heartbeat be ignored by other partitions? */
1182 if (!xpc_kdebug_ignore
)
1186 case DIE_MCA_MONARCH_ENTER
:
1187 case DIE_INIT_MONARCH_ENTER
:
1188 xpc_arch_ops
.offline_heartbeat();
1191 case DIE_KDEBUG_LEAVE
:
1192 /* Is lack of heartbeat being ignored by other partitions? */
1193 if (!xpc_kdebug_ignore
)
1197 case DIE_MCA_MONARCH_LEAVE
:
1198 case DIE_INIT_MONARCH_LEAVE
:
1199 xpc_arch_ops
.online_heartbeat();
1203 struct die_args
*die_args
= _die_args
;
1207 if (die_args
->trapnr
== X86_TRAP_DF
)
1208 xpc_die_deactivate();
1210 if (((die_args
->trapnr
== X86_TRAP_MF
) ||
1211 (die_args
->trapnr
== X86_TRAP_XF
)) &&
1212 !user_mode(die_args
->regs
))
1213 xpc_die_deactivate();
1222 xpc_die_deactivate();
1233 struct task_struct
*kthread
;
1235 dev_set_name(xpc_part
, "part");
1236 dev_set_name(xpc_chan
, "chan");
1240 * The ia64-sn2 architecture supports at most 64 partitions.
1241 * And the inability to unregister remote amos restricts us
1242 * further to only support exactly 64 partitions on this
1243 * architecture, no less.
1245 if (xp_max_npartitions
!= 64) {
1246 dev_err(xpc_part
, "max #of partitions not set to 64\n");
1249 ret
= xpc_init_sn2();
1252 } else if (is_uv()) {
1253 ret
= xpc_init_uv();
1262 ret
= xpc_setup_partitions();
1264 dev_err(xpc_part
, "can't get memory for partition structure\n");
1268 xpc_sysctl
= register_sysctl_table(xpc_sys_dir
);
1271 * Fill the partition reserved page with the information needed by
1272 * other partitions to discover we are alive and establish initial
1275 ret
= xpc_setup_rsvd_page();
1277 dev_err(xpc_part
, "can't setup our reserved page\n");
1281 /* add ourselves to the reboot_notifier_list */
1282 ret
= register_reboot_notifier(&xpc_reboot_notifier
);
1284 dev_warn(xpc_part
, "can't register reboot notifier\n");
1286 /* add ourselves to the die_notifier list */
1287 ret
= register_die_notifier(&xpc_die_notifier
);
1289 dev_warn(xpc_part
, "can't register die notifier\n");
1292 * The real work-horse behind xpc. This processes incoming
1293 * interrupts and monitors remote heartbeats.
1295 kthread
= kthread_run(xpc_hb_checker
, NULL
, XPC_HB_CHECK_THREAD_NAME
);
1296 if (IS_ERR(kthread
)) {
1297 dev_err(xpc_part
, "failed while forking hb check thread\n");
1303 * Startup a thread that will attempt to discover other partitions to
1304 * activate based on info provided by SAL. This new thread is short
1305 * lived and will exit once discovery is complete.
1307 kthread
= kthread_run(xpc_initiate_discovery
, NULL
,
1308 XPC_DISCOVERY_THREAD_NAME
);
1309 if (IS_ERR(kthread
)) {
1310 dev_err(xpc_part
, "failed while forking discovery thread\n");
1312 /* mark this new thread as a non-starter */
1313 complete(&xpc_discovery_exited
);
1315 xpc_do_exit(xpUnloading
);
1319 /* set the interface to point at XPC's functions */
1320 xpc_set_interface(xpc_initiate_connect
, xpc_initiate_disconnect
,
1321 xpc_initiate_send
, xpc_initiate_send_notify
,
1322 xpc_initiate_received
, xpc_initiate_partid_to_nasids
);
1326 /* initialization was not successful */
1328 xpc_teardown_rsvd_page();
1330 (void)unregister_die_notifier(&xpc_die_notifier
);
1331 (void)unregister_reboot_notifier(&xpc_reboot_notifier
);
1334 unregister_sysctl_table(xpc_sysctl
);
1336 xpc_teardown_partitions();
1345 module_init(xpc_init
);
1350 xpc_do_exit(xpUnloading
);
1353 module_exit(xpc_exit
);
1355 MODULE_AUTHOR("Silicon Graphics, Inc.");
1356 MODULE_DESCRIPTION("Cross Partition Communication (XPC) support");
1357 MODULE_LICENSE("GPL");
1359 module_param(xpc_hb_interval
, int, 0);
1360 MODULE_PARM_DESC(xpc_hb_interval
, "Number of seconds between "
1361 "heartbeat increments.");
1363 module_param(xpc_hb_check_interval
, int, 0);
1364 MODULE_PARM_DESC(xpc_hb_check_interval
, "Number of seconds between "
1365 "heartbeat checks.");
1367 module_param(xpc_disengage_timelimit
, int, 0);
1368 MODULE_PARM_DESC(xpc_disengage_timelimit
, "Number of seconds to wait "
1369 "for disengage to complete.");
1371 module_param(xpc_kdebug_ignore
, int, 0);
1372 MODULE_PARM_DESC(xpc_kdebug_ignore
, "Should lack of heartbeat be ignored by "
1373 "other partitions when dropping into kdebug.");