perf tools: Don't clone maps from parent when synthesizing forks
[linux/fpc-iii.git] / drivers / mmc / core / sdio_ops.c
blobabaaba38514f7497bb5fd66c541923e7974d47be
1 /*
2 * linux/drivers/mmc/sdio_ops.c
4 * Copyright 2006-2007 Pierre Ossman
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
12 #include <linux/scatterlist.h>
14 #include <linux/mmc/host.h>
15 #include <linux/mmc/card.h>
16 #include <linux/mmc/mmc.h>
17 #include <linux/mmc/sdio.h>
19 #include "core.h"
20 #include "sdio_ops.h"
22 int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
24 struct mmc_command cmd = {};
25 int i, err = 0;
27 cmd.opcode = SD_IO_SEND_OP_COND;
28 cmd.arg = ocr;
29 cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
31 for (i = 100; i; i--) {
32 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
33 if (err)
34 break;
36 /* if we're just probing, do a single pass */
37 if (ocr == 0)
38 break;
40 /* otherwise wait until reset completes */
41 if (mmc_host_is_spi(host)) {
43 * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
44 * an initialized card under SPI, but some cards
45 * (Marvell's) only behave when looking at this
46 * one.
48 if (cmd.resp[1] & MMC_CARD_BUSY)
49 break;
50 } else {
51 if (cmd.resp[0] & MMC_CARD_BUSY)
52 break;
55 err = -ETIMEDOUT;
57 mmc_delay(10);
60 if (rocr)
61 *rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
63 return err;
66 static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
67 unsigned addr, u8 in, u8 *out)
69 struct mmc_command cmd = {};
70 int err;
72 if (fn > 7)
73 return -EINVAL;
75 /* sanity check */
76 if (addr & ~0x1FFFF)
77 return -EINVAL;
79 cmd.opcode = SD_IO_RW_DIRECT;
80 cmd.arg = write ? 0x80000000 : 0x00000000;
81 cmd.arg |= fn << 28;
82 cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
83 cmd.arg |= addr << 9;
84 cmd.arg |= in;
85 cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
87 err = mmc_wait_for_cmd(host, &cmd, 0);
88 if (err)
89 return err;
91 if (mmc_host_is_spi(host)) {
92 /* host driver already reported errors */
93 } else {
94 if (cmd.resp[0] & R5_ERROR)
95 return -EIO;
96 if (cmd.resp[0] & R5_FUNCTION_NUMBER)
97 return -EINVAL;
98 if (cmd.resp[0] & R5_OUT_OF_RANGE)
99 return -ERANGE;
102 if (out) {
103 if (mmc_host_is_spi(host))
104 *out = (cmd.resp[0] >> 8) & 0xFF;
105 else
106 *out = cmd.resp[0] & 0xFF;
109 return 0;
112 int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
113 unsigned addr, u8 in, u8 *out)
115 return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
118 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
119 unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
121 struct mmc_request mrq = {};
122 struct mmc_command cmd = {};
123 struct mmc_data data = {};
124 struct scatterlist sg, *sg_ptr;
125 struct sg_table sgtable;
126 unsigned int nents, left_size, i;
127 unsigned int seg_size = card->host->max_seg_size;
129 WARN_ON(blksz == 0);
131 /* sanity check */
132 if (addr & ~0x1FFFF)
133 return -EINVAL;
135 mrq.cmd = &cmd;
136 mrq.data = &data;
138 cmd.opcode = SD_IO_RW_EXTENDED;
139 cmd.arg = write ? 0x80000000 : 0x00000000;
140 cmd.arg |= fn << 28;
141 cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
142 cmd.arg |= addr << 9;
143 if (blocks == 0)
144 cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */
145 else
146 cmd.arg |= 0x08000000 | blocks; /* block mode */
147 cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
149 data.blksz = blksz;
150 /* Code in host drivers/fwk assumes that "blocks" always is >=1 */
151 data.blocks = blocks ? blocks : 1;
152 data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
154 left_size = data.blksz * data.blocks;
155 nents = DIV_ROUND_UP(left_size, seg_size);
156 if (nents > 1) {
157 if (sg_alloc_table(&sgtable, nents, GFP_KERNEL))
158 return -ENOMEM;
160 data.sg = sgtable.sgl;
161 data.sg_len = nents;
163 for_each_sg(data.sg, sg_ptr, data.sg_len, i) {
164 sg_set_buf(sg_ptr, buf + i * seg_size,
165 min(seg_size, left_size));
166 left_size -= seg_size;
168 } else {
169 data.sg = &sg;
170 data.sg_len = 1;
172 sg_init_one(&sg, buf, left_size);
175 mmc_set_data_timeout(&data, card);
177 mmc_wait_for_req(card->host, &mrq);
179 if (nents > 1)
180 sg_free_table(&sgtable);
182 if (cmd.error)
183 return cmd.error;
184 if (data.error)
185 return data.error;
187 if (mmc_host_is_spi(card->host)) {
188 /* host driver already reported errors */
189 } else {
190 if (cmd.resp[0] & R5_ERROR)
191 return -EIO;
192 if (cmd.resp[0] & R5_FUNCTION_NUMBER)
193 return -EINVAL;
194 if (cmd.resp[0] & R5_OUT_OF_RANGE)
195 return -ERANGE;
198 return 0;
201 int sdio_reset(struct mmc_host *host)
203 int ret;
204 u8 abort;
206 /* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
208 ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort);
209 if (ret)
210 abort = 0x08;
211 else
212 abort |= 0x08;
214 return mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL);