2 * Copyright (c) 2014-2015 MediaTek Inc.
3 * Author: Chaotian.Jing <chaotian.jing@mediatek.com>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
15 #include <linux/module.h>
16 #include <linux/clk.h>
17 #include <linux/delay.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/ioport.h>
20 #include <linux/irq.h>
21 #include <linux/of_address.h>
22 #include <linux/of_device.h>
23 #include <linux/of_irq.h>
24 #include <linux/of_gpio.h>
25 #include <linux/pinctrl/consumer.h>
26 #include <linux/platform_device.h>
28 #include <linux/pm_runtime.h>
29 #include <linux/regulator/consumer.h>
30 #include <linux/slab.h>
31 #include <linux/spinlock.h>
32 #include <linux/interrupt.h>
34 #include <linux/mmc/card.h>
35 #include <linux/mmc/core.h>
36 #include <linux/mmc/host.h>
37 #include <linux/mmc/mmc.h>
38 #include <linux/mmc/sd.h>
39 #include <linux/mmc/sdio.h>
40 #include <linux/mmc/slot-gpio.h>
42 #define MAX_BD_NUM 1024
44 /*--------------------------------------------------------------------------*/
45 /* Common Definition */
46 /*--------------------------------------------------------------------------*/
47 #define MSDC_BUS_1BITS 0x0
48 #define MSDC_BUS_4BITS 0x1
49 #define MSDC_BUS_8BITS 0x2
51 #define MSDC_BURST_64B 0x6
53 /*--------------------------------------------------------------------------*/
55 /*--------------------------------------------------------------------------*/
57 #define MSDC_IOCON 0x04
60 #define MSDC_INTEN 0x10
61 #define MSDC_FIFOCS 0x14
66 #define SDC_RESP0 0x40
67 #define SDC_RESP1 0x44
68 #define SDC_RESP2 0x48
69 #define SDC_RESP3 0x4c
70 #define SDC_BLK_NUM 0x50
71 #define SDC_ADV_CFG0 0x64
72 #define EMMC_IOCON 0x7c
73 #define SDC_ACMD_RESP 0x80
74 #define DMA_SA_H4BIT 0x8c
75 #define MSDC_DMA_SA 0x90
76 #define MSDC_DMA_CTRL 0x98
77 #define MSDC_DMA_CFG 0x9c
78 #define MSDC_PATCH_BIT 0xb0
79 #define MSDC_PATCH_BIT1 0xb4
80 #define MSDC_PATCH_BIT2 0xb8
81 #define MSDC_PAD_TUNE 0xec
82 #define MSDC_PAD_TUNE0 0xf0
83 #define PAD_DS_TUNE 0x188
84 #define PAD_CMD_TUNE 0x18c
85 #define EMMC50_CFG0 0x208
86 #define EMMC50_CFG3 0x220
87 #define SDC_FIFO_CFG 0x228
89 /*--------------------------------------------------------------------------*/
90 /* Top Pad Register Offset */
91 /*--------------------------------------------------------------------------*/
92 #define EMMC_TOP_CONTROL 0x00
93 #define EMMC_TOP_CMD 0x04
94 #define EMMC50_PAD_DS_TUNE 0x0c
96 /*--------------------------------------------------------------------------*/
98 /*--------------------------------------------------------------------------*/
101 #define MSDC_CFG_MODE (0x1 << 0) /* RW */
102 #define MSDC_CFG_CKPDN (0x1 << 1) /* RW */
103 #define MSDC_CFG_RST (0x1 << 2) /* RW */
104 #define MSDC_CFG_PIO (0x1 << 3) /* RW */
105 #define MSDC_CFG_CKDRVEN (0x1 << 4) /* RW */
106 #define MSDC_CFG_BV18SDT (0x1 << 5) /* RW */
107 #define MSDC_CFG_BV18PSS (0x1 << 6) /* R */
108 #define MSDC_CFG_CKSTB (0x1 << 7) /* R */
109 #define MSDC_CFG_CKDIV (0xff << 8) /* RW */
110 #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
111 #define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
112 #define MSDC_CFG_HS400_CK_MODE_EXTRA (0x1 << 22) /* RW */
113 #define MSDC_CFG_CKDIV_EXTRA (0xfff << 8) /* RW */
114 #define MSDC_CFG_CKMOD_EXTRA (0x3 << 20) /* RW */
116 /* MSDC_IOCON mask */
117 #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
118 #define MSDC_IOCON_RSPL (0x1 << 1) /* RW */
119 #define MSDC_IOCON_DSPL (0x1 << 2) /* RW */
120 #define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */
121 #define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */
122 #define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */
123 #define MSDC_IOCON_W_DSPL (0x1 << 8) /* RW */
124 #define MSDC_IOCON_D0SPL (0x1 << 16) /* RW */
125 #define MSDC_IOCON_D1SPL (0x1 << 17) /* RW */
126 #define MSDC_IOCON_D2SPL (0x1 << 18) /* RW */
127 #define MSDC_IOCON_D3SPL (0x1 << 19) /* RW */
128 #define MSDC_IOCON_D4SPL (0x1 << 20) /* RW */
129 #define MSDC_IOCON_D5SPL (0x1 << 21) /* RW */
130 #define MSDC_IOCON_D6SPL (0x1 << 22) /* RW */
131 #define MSDC_IOCON_D7SPL (0x1 << 23) /* RW */
132 #define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */
135 #define MSDC_PS_CDEN (0x1 << 0) /* RW */
136 #define MSDC_PS_CDSTS (0x1 << 1) /* R */
137 #define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
138 #define MSDC_PS_DAT (0xff << 16) /* R */
139 #define MSDC_PS_CMD (0x1 << 24) /* R */
140 #define MSDC_PS_WP (0x1 << 31) /* R */
143 #define MSDC_INT_MMCIRQ (0x1 << 0) /* W1C */
144 #define MSDC_INT_CDSC (0x1 << 1) /* W1C */
145 #define MSDC_INT_ACMDRDY (0x1 << 3) /* W1C */
146 #define MSDC_INT_ACMDTMO (0x1 << 4) /* W1C */
147 #define MSDC_INT_ACMDCRCERR (0x1 << 5) /* W1C */
148 #define MSDC_INT_DMAQ_EMPTY (0x1 << 6) /* W1C */
149 #define MSDC_INT_SDIOIRQ (0x1 << 7) /* W1C */
150 #define MSDC_INT_CMDRDY (0x1 << 8) /* W1C */
151 #define MSDC_INT_CMDTMO (0x1 << 9) /* W1C */
152 #define MSDC_INT_RSPCRCERR (0x1 << 10) /* W1C */
153 #define MSDC_INT_CSTA (0x1 << 11) /* R */
154 #define MSDC_INT_XFER_COMPL (0x1 << 12) /* W1C */
155 #define MSDC_INT_DXFER_DONE (0x1 << 13) /* W1C */
156 #define MSDC_INT_DATTMO (0x1 << 14) /* W1C */
157 #define MSDC_INT_DATCRCERR (0x1 << 15) /* W1C */
158 #define MSDC_INT_ACMD19_DONE (0x1 << 16) /* W1C */
159 #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
160 #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
161 #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
163 /* MSDC_INTEN mask */
164 #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
165 #define MSDC_INTEN_CDSC (0x1 << 1) /* RW */
166 #define MSDC_INTEN_ACMDRDY (0x1 << 3) /* RW */
167 #define MSDC_INTEN_ACMDTMO (0x1 << 4) /* RW */
168 #define MSDC_INTEN_ACMDCRCERR (0x1 << 5) /* RW */
169 #define MSDC_INTEN_DMAQ_EMPTY (0x1 << 6) /* RW */
170 #define MSDC_INTEN_SDIOIRQ (0x1 << 7) /* RW */
171 #define MSDC_INTEN_CMDRDY (0x1 << 8) /* RW */
172 #define MSDC_INTEN_CMDTMO (0x1 << 9) /* RW */
173 #define MSDC_INTEN_RSPCRCERR (0x1 << 10) /* RW */
174 #define MSDC_INTEN_CSTA (0x1 << 11) /* RW */
175 #define MSDC_INTEN_XFER_COMPL (0x1 << 12) /* RW */
176 #define MSDC_INTEN_DXFER_DONE (0x1 << 13) /* RW */
177 #define MSDC_INTEN_DATTMO (0x1 << 14) /* RW */
178 #define MSDC_INTEN_DATCRCERR (0x1 << 15) /* RW */
179 #define MSDC_INTEN_ACMD19_DONE (0x1 << 16) /* RW */
180 #define MSDC_INTEN_DMA_BDCSERR (0x1 << 17) /* RW */
181 #define MSDC_INTEN_DMA_GPDCSERR (0x1 << 18) /* RW */
182 #define MSDC_INTEN_DMA_PROTECT (0x1 << 19) /* RW */
184 /* MSDC_FIFOCS mask */
185 #define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */
186 #define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */
187 #define MSDC_FIFOCS_CLR (0x1 << 31) /* RW */
190 #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
191 #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
192 #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
193 #define SDC_CFG_SDIO (0x1 << 19) /* RW */
194 #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
195 #define SDC_CFG_INTATGAP (0x1 << 21) /* RW */
196 #define SDC_CFG_DTOC (0xff << 24) /* RW */
199 #define SDC_STS_SDCBUSY (0x1 << 0) /* RW */
200 #define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
201 #define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
203 /* SDC_ADV_CFG0 mask */
204 #define SDC_RX_ENHANCE_EN (0x1 << 20) /* RW */
206 /* DMA_SA_H4BIT mask */
207 #define DMA_ADDR_HIGH_4BIT (0xf << 0) /* RW */
209 /* MSDC_DMA_CTRL mask */
210 #define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
211 #define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
212 #define MSDC_DMA_CTRL_RESUME (0x1 << 2) /* W */
213 #define MSDC_DMA_CTRL_MODE (0x1 << 8) /* RW */
214 #define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) /* RW */
215 #define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */
217 /* MSDC_DMA_CFG mask */
218 #define MSDC_DMA_CFG_STS (0x1 << 0) /* R */
219 #define MSDC_DMA_CFG_DECSEN (0x1 << 1) /* RW */
220 #define MSDC_DMA_CFG_AHBHPROT2 (0x2 << 8) /* RW */
221 #define MSDC_DMA_CFG_ACTIVEEN (0x2 << 12) /* RW */
222 #define MSDC_DMA_CFG_CS12B16B (0x1 << 16) /* RW */
224 /* MSDC_PATCH_BIT mask */
225 #define MSDC_PATCH_BIT_ODDSUPP (0x1 << 1) /* RW */
226 #define MSDC_INT_DAT_LATCH_CK_SEL (0x7 << 7)
227 #define MSDC_CKGEN_MSDC_DLY_SEL (0x1f << 10)
228 #define MSDC_PATCH_BIT_IODSSEL (0x1 << 16) /* RW */
229 #define MSDC_PATCH_BIT_IOINTSEL (0x1 << 17) /* RW */
230 #define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */
231 #define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */
232 #define MSDC_PATCH_BIT_IDRTSEL (0x1 << 26) /* RW */
233 #define MSDC_PATCH_BIT_CMDFSEL (0x1 << 27) /* RW */
234 #define MSDC_PATCH_BIT_INTDLSEL (0x1 << 28) /* RW */
235 #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
236 #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
238 #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
240 #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
241 #define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
242 #define MSDC_PB2_SUPPORT_64G (0x1 << 1) /* RW */
243 #define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
244 #define MSDC_PB2_RESPSTSENSEL (0x7 << 16) /* RW */
245 #define MSDC_PB2_CRCSTSENSEL (0x7 << 29) /* RW */
247 #define MSDC_PAD_TUNE_DATWRDLY (0x1f << 0) /* RW */
248 #define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
249 #define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
250 #define MSDC_PAD_TUNE_CMDRRDLY (0x1f << 22) /* RW */
251 #define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
252 #define MSDC_PAD_TUNE_RXDLYSEL (0x1 << 15) /* RW */
253 #define MSDC_PAD_TUNE_RD_SEL (0x1 << 13) /* RW */
254 #define MSDC_PAD_TUNE_CMD_SEL (0x1 << 21) /* RW */
256 #define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
257 #define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
258 #define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */
260 #define PAD_CMD_TUNE_RX_DLY3 (0x1f << 1) /* RW */
262 #define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0) /* RW */
263 #define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
264 #define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
266 #define EMMC50_CFG3_OUTS_WR (0x1f << 0) /* RW */
268 #define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */
269 #define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */
271 /* EMMC_TOP_CONTROL mask */
272 #define PAD_RXDLY_SEL (0x1 << 0) /* RW */
273 #define DELAY_EN (0x1 << 1) /* RW */
274 #define PAD_DAT_RD_RXDLY2 (0x1f << 2) /* RW */
275 #define PAD_DAT_RD_RXDLY (0x1f << 7) /* RW */
276 #define PAD_DAT_RD_RXDLY2_SEL (0x1 << 12) /* RW */
277 #define PAD_DAT_RD_RXDLY_SEL (0x1 << 13) /* RW */
278 #define DATA_K_VALUE_SEL (0x1 << 14) /* RW */
279 #define SDC_RX_ENH_EN (0x1 << 15) /* TW */
281 /* EMMC_TOP_CMD mask */
282 #define PAD_CMD_RXDLY2 (0x1f << 0) /* RW */
283 #define PAD_CMD_RXDLY (0x1f << 5) /* RW */
284 #define PAD_CMD_RD_RXDLY2_SEL (0x1 << 10) /* RW */
285 #define PAD_CMD_RD_RXDLY_SEL (0x1 << 11) /* RW */
286 #define PAD_CMD_TX_DLY (0x1f << 12) /* RW */
288 #define REQ_CMD_EIO (0x1 << 0)
289 #define REQ_CMD_TMO (0x1 << 1)
290 #define REQ_DAT_ERR (0x1 << 2)
291 #define REQ_STOP_EIO (0x1 << 3)
292 #define REQ_STOP_TMO (0x1 << 4)
293 #define REQ_CMD_BUSY (0x1 << 5)
295 #define MSDC_PREPARE_FLAG (0x1 << 0)
296 #define MSDC_ASYNC_FLAG (0x1 << 1)
297 #define MSDC_MMAP_FLAG (0x1 << 2)
299 #define MTK_MMC_AUTOSUSPEND_DELAY 50
300 #define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */
301 #define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */
303 #define PAD_DELAY_MAX 32 /* PAD delay cells */
304 /*--------------------------------------------------------------------------*/
305 /* Descriptor Structure */
306 /*--------------------------------------------------------------------------*/
307 struct mt_gpdma_desc
{
309 #define GPDMA_DESC_HWO (0x1 << 0)
310 #define GPDMA_DESC_BDP (0x1 << 1)
311 #define GPDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
312 #define GPDMA_DESC_INT (0x1 << 16)
313 #define GPDMA_DESC_NEXT_H4 (0xf << 24)
314 #define GPDMA_DESC_PTR_H4 (0xf << 28)
318 #define GPDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
319 #define GPDMA_DESC_EXTLEN (0xff << 16) /* bit16 ~ bit23 */
325 struct mt_bdma_desc
{
327 #define BDMA_DESC_EOL (0x1 << 0)
328 #define BDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
329 #define BDMA_DESC_BLKPAD (0x1 << 17)
330 #define BDMA_DESC_DWPAD (0x1 << 18)
331 #define BDMA_DESC_NEXT_H4 (0xf << 24)
332 #define BDMA_DESC_PTR_H4 (0xf << 28)
336 #define BDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
340 struct scatterlist
*sg
; /* I/O scatter list */
341 struct mt_gpdma_desc
*gpd
; /* pointer to gpd array */
342 struct mt_bdma_desc
*bd
; /* pointer to bd array */
343 dma_addr_t gpd_addr
; /* the physical address of gpd array */
344 dma_addr_t bd_addr
; /* the physical address of bd array */
347 struct msdc_save_para
{
360 u32 emmc_top_control
;
362 u32 emmc50_pad_ds_tune
;
365 struct mtk_mmc_compatible
{
367 bool hs400_tune
; /* only used for MT8173 */
377 struct msdc_tune_para
{
381 u32 emmc_top_control
;
385 struct msdc_delay_phase
{
393 const struct mtk_mmc_compatible
*dev_comp
;
394 struct mmc_host
*mmc
; /* mmc structure */
398 struct mmc_request
*mrq
;
399 struct mmc_command
*cmd
;
400 struct mmc_data
*data
;
403 void __iomem
*base
; /* host base address */
404 void __iomem
*top_base
; /* host top register base address */
406 struct msdc_dma dma
; /* dma channel */
409 u32 timeout_ns
; /* data timeout ns */
410 u32 timeout_clks
; /* data timeout clks */
412 struct pinctrl
*pinctrl
;
413 struct pinctrl_state
*pins_default
;
414 struct pinctrl_state
*pins_uhs
;
415 struct delayed_work req_timeout
;
416 int irq
; /* host interrupt */
418 struct clk
*src_clk
; /* msdc source clock */
419 struct clk
*h_clk
; /* msdc h_clk */
420 struct clk
*bus_clk
; /* bus clock which used to access register */
421 struct clk
*src_clk_cg
; /* msdc source clock control gate */
422 u32 mclk
; /* mmc subsystem clock frequency */
423 u32 src_clk_freq
; /* source clock frequency */
424 unsigned char timing
;
428 u32 hs200_cmd_int_delay
; /* cmd internal delay for HS200/SDR104 */
429 u32 hs400_cmd_int_delay
; /* cmd internal delay for HS400 */
430 bool hs400_cmd_resp_sel_rising
;
431 /* cmd response sample selection for HS400 */
432 bool hs400_mode
; /* current eMMC will run at hs400 mode */
433 struct msdc_save_para save_para
; /* used when gate HCLK */
434 struct msdc_tune_para def_tune_para
; /* default tune setting */
435 struct msdc_tune_para saved_tune_para
; /* tune result of CMD21/CMD19 */
438 static const struct mtk_mmc_compatible mt8135_compat
= {
441 .pad_tune_reg
= MSDC_PAD_TUNE
,
445 .stop_clk_fix
= false,
447 .support_64g
= false,
450 static const struct mtk_mmc_compatible mt8173_compat
= {
453 .pad_tune_reg
= MSDC_PAD_TUNE
,
457 .stop_clk_fix
= false,
459 .support_64g
= false,
462 static const struct mtk_mmc_compatible mt8183_compat
= {
465 .pad_tune_reg
= MSDC_PAD_TUNE0
,
469 .stop_clk_fix
= true,
474 static const struct mtk_mmc_compatible mt2701_compat
= {
477 .pad_tune_reg
= MSDC_PAD_TUNE0
,
481 .stop_clk_fix
= false,
483 .support_64g
= false,
486 static const struct mtk_mmc_compatible mt2712_compat
= {
489 .pad_tune_reg
= MSDC_PAD_TUNE0
,
493 .stop_clk_fix
= true,
498 static const struct mtk_mmc_compatible mt7622_compat
= {
501 .pad_tune_reg
= MSDC_PAD_TUNE0
,
505 .stop_clk_fix
= true,
507 .support_64g
= false,
510 static const struct of_device_id msdc_of_ids
[] = {
511 { .compatible
= "mediatek,mt8135-mmc", .data
= &mt8135_compat
},
512 { .compatible
= "mediatek,mt8173-mmc", .data
= &mt8173_compat
},
513 { .compatible
= "mediatek,mt8183-mmc", .data
= &mt8183_compat
},
514 { .compatible
= "mediatek,mt2701-mmc", .data
= &mt2701_compat
},
515 { .compatible
= "mediatek,mt2712-mmc", .data
= &mt2712_compat
},
516 { .compatible
= "mediatek,mt7622-mmc", .data
= &mt7622_compat
},
519 MODULE_DEVICE_TABLE(of
, msdc_of_ids
);
521 static void sdr_set_bits(void __iomem
*reg
, u32 bs
)
523 u32 val
= readl(reg
);
529 static void sdr_clr_bits(void __iomem
*reg
, u32 bs
)
531 u32 val
= readl(reg
);
537 static void sdr_set_field(void __iomem
*reg
, u32 field
, u32 val
)
539 unsigned int tv
= readl(reg
);
542 tv
|= ((val
) << (ffs((unsigned int)field
) - 1));
546 static void sdr_get_field(void __iomem
*reg
, u32 field
, u32
*val
)
548 unsigned int tv
= readl(reg
);
550 *val
= ((tv
& field
) >> (ffs((unsigned int)field
) - 1));
553 static void msdc_reset_hw(struct msdc_host
*host
)
557 sdr_set_bits(host
->base
+ MSDC_CFG
, MSDC_CFG_RST
);
558 while (readl(host
->base
+ MSDC_CFG
) & MSDC_CFG_RST
)
561 sdr_set_bits(host
->base
+ MSDC_FIFOCS
, MSDC_FIFOCS_CLR
);
562 while (readl(host
->base
+ MSDC_FIFOCS
) & MSDC_FIFOCS_CLR
)
565 val
= readl(host
->base
+ MSDC_INT
);
566 writel(val
, host
->base
+ MSDC_INT
);
569 static void msdc_cmd_next(struct msdc_host
*host
,
570 struct mmc_request
*mrq
, struct mmc_command
*cmd
);
572 static const u32 cmd_ints_mask
= MSDC_INTEN_CMDRDY
| MSDC_INTEN_RSPCRCERR
|
573 MSDC_INTEN_CMDTMO
| MSDC_INTEN_ACMDRDY
|
574 MSDC_INTEN_ACMDCRCERR
| MSDC_INTEN_ACMDTMO
;
575 static const u32 data_ints_mask
= MSDC_INTEN_XFER_COMPL
| MSDC_INTEN_DATTMO
|
576 MSDC_INTEN_DATCRCERR
| MSDC_INTEN_DMA_BDCSERR
|
577 MSDC_INTEN_DMA_GPDCSERR
| MSDC_INTEN_DMA_PROTECT
;
579 static u8
msdc_dma_calcs(u8
*buf
, u32 len
)
583 for (i
= 0; i
< len
; i
++)
585 return 0xff - (u8
) sum
;
588 static inline void msdc_dma_setup(struct msdc_host
*host
, struct msdc_dma
*dma
,
589 struct mmc_data
*data
)
591 unsigned int j
, dma_len
;
592 dma_addr_t dma_address
;
594 struct scatterlist
*sg
;
595 struct mt_gpdma_desc
*gpd
;
596 struct mt_bdma_desc
*bd
;
604 gpd
->gpd_info
|= GPDMA_DESC_HWO
;
605 gpd
->gpd_info
|= GPDMA_DESC_BDP
;
606 /* need to clear first. use these bits to calc checksum */
607 gpd
->gpd_info
&= ~GPDMA_DESC_CHECKSUM
;
608 gpd
->gpd_info
|= msdc_dma_calcs((u8
*) gpd
, 16) << 8;
611 for_each_sg(data
->sg
, sg
, data
->sg_count
, j
) {
612 dma_address
= sg_dma_address(sg
);
613 dma_len
= sg_dma_len(sg
);
616 bd
[j
].bd_info
&= ~BDMA_DESC_BLKPAD
;
617 bd
[j
].bd_info
&= ~BDMA_DESC_DWPAD
;
618 bd
[j
].ptr
= lower_32_bits(dma_address
);
619 if (host
->dev_comp
->support_64g
) {
620 bd
[j
].bd_info
&= ~BDMA_DESC_PTR_H4
;
621 bd
[j
].bd_info
|= (upper_32_bits(dma_address
) & 0xf)
624 bd
[j
].bd_data_len
&= ~BDMA_DESC_BUFLEN
;
625 bd
[j
].bd_data_len
|= (dma_len
& BDMA_DESC_BUFLEN
);
627 if (j
== data
->sg_count
- 1) /* the last bd */
628 bd
[j
].bd_info
|= BDMA_DESC_EOL
;
630 bd
[j
].bd_info
&= ~BDMA_DESC_EOL
;
632 /* checksume need to clear first */
633 bd
[j
].bd_info
&= ~BDMA_DESC_CHECKSUM
;
634 bd
[j
].bd_info
|= msdc_dma_calcs((u8
*)(&bd
[j
]), 16) << 8;
637 sdr_set_field(host
->base
+ MSDC_DMA_CFG
, MSDC_DMA_CFG_DECSEN
, 1);
638 dma_ctrl
= readl_relaxed(host
->base
+ MSDC_DMA_CTRL
);
639 dma_ctrl
&= ~(MSDC_DMA_CTRL_BRUSTSZ
| MSDC_DMA_CTRL_MODE
);
640 dma_ctrl
|= (MSDC_BURST_64B
<< 12 | 1 << 8);
641 writel_relaxed(dma_ctrl
, host
->base
+ MSDC_DMA_CTRL
);
642 if (host
->dev_comp
->support_64g
)
643 sdr_set_field(host
->base
+ DMA_SA_H4BIT
, DMA_ADDR_HIGH_4BIT
,
644 upper_32_bits(dma
->gpd_addr
) & 0xf);
645 writel(lower_32_bits(dma
->gpd_addr
), host
->base
+ MSDC_DMA_SA
);
648 static void msdc_prepare_data(struct msdc_host
*host
, struct mmc_request
*mrq
)
650 struct mmc_data
*data
= mrq
->data
;
652 if (!(data
->host_cookie
& MSDC_PREPARE_FLAG
)) {
653 data
->host_cookie
|= MSDC_PREPARE_FLAG
;
654 data
->sg_count
= dma_map_sg(host
->dev
, data
->sg
, data
->sg_len
,
655 mmc_get_dma_dir(data
));
659 static void msdc_unprepare_data(struct msdc_host
*host
, struct mmc_request
*mrq
)
661 struct mmc_data
*data
= mrq
->data
;
663 if (data
->host_cookie
& MSDC_ASYNC_FLAG
)
666 if (data
->host_cookie
& MSDC_PREPARE_FLAG
) {
667 dma_unmap_sg(host
->dev
, data
->sg
, data
->sg_len
,
668 mmc_get_dma_dir(data
));
669 data
->host_cookie
&= ~MSDC_PREPARE_FLAG
;
673 /* clock control primitives */
674 static void msdc_set_timeout(struct msdc_host
*host
, u32 ns
, u32 clks
)
679 host
->timeout_ns
= ns
;
680 host
->timeout_clks
= clks
;
681 if (host
->mmc
->actual_clock
== 0) {
684 clk_ns
= 1000000000UL / host
->mmc
->actual_clock
;
685 timeout
= (ns
+ clk_ns
- 1) / clk_ns
+ clks
;
686 /* in 1048576 sclk cycle unit */
687 timeout
= (timeout
+ (0x1 << 20) - 1) >> 20;
688 if (host
->dev_comp
->clk_div_bits
== 8)
689 sdr_get_field(host
->base
+ MSDC_CFG
,
690 MSDC_CFG_CKMOD
, &mode
);
692 sdr_get_field(host
->base
+ MSDC_CFG
,
693 MSDC_CFG_CKMOD_EXTRA
, &mode
);
694 /*DDR mode will double the clk cycles for data timeout */
695 timeout
= mode
>= 2 ? timeout
* 2 : timeout
;
696 timeout
= timeout
> 1 ? timeout
- 1 : 0;
697 timeout
= timeout
> 255 ? 255 : timeout
;
699 sdr_set_field(host
->base
+ SDC_CFG
, SDC_CFG_DTOC
, timeout
);
702 static void msdc_gate_clock(struct msdc_host
*host
)
704 clk_disable_unprepare(host
->src_clk_cg
);
705 clk_disable_unprepare(host
->src_clk
);
706 clk_disable_unprepare(host
->bus_clk
);
707 clk_disable_unprepare(host
->h_clk
);
710 static void msdc_ungate_clock(struct msdc_host
*host
)
712 clk_prepare_enable(host
->h_clk
);
713 clk_prepare_enable(host
->bus_clk
);
714 clk_prepare_enable(host
->src_clk
);
715 clk_prepare_enable(host
->src_clk_cg
);
716 while (!(readl(host
->base
+ MSDC_CFG
) & MSDC_CFG_CKSTB
))
720 static void msdc_set_mclk(struct msdc_host
*host
, unsigned char timing
, u32 hz
)
726 u32 tune_reg
= host
->dev_comp
->pad_tune_reg
;
729 dev_dbg(host
->dev
, "set mclk to 0\n");
731 host
->mmc
->actual_clock
= 0;
732 sdr_clr_bits(host
->base
+ MSDC_CFG
, MSDC_CFG_CKPDN
);
736 flags
= readl(host
->base
+ MSDC_INTEN
);
737 sdr_clr_bits(host
->base
+ MSDC_INTEN
, flags
);
738 if (host
->dev_comp
->clk_div_bits
== 8)
739 sdr_clr_bits(host
->base
+ MSDC_CFG
, MSDC_CFG_HS400_CK_MODE
);
741 sdr_clr_bits(host
->base
+ MSDC_CFG
,
742 MSDC_CFG_HS400_CK_MODE_EXTRA
);
743 if (timing
== MMC_TIMING_UHS_DDR50
||
744 timing
== MMC_TIMING_MMC_DDR52
||
745 timing
== MMC_TIMING_MMC_HS400
) {
746 if (timing
== MMC_TIMING_MMC_HS400
)
749 mode
= 0x2; /* ddr mode and use divisor */
751 if (hz
>= (host
->src_clk_freq
>> 2)) {
752 div
= 0; /* mean div = 1/4 */
753 sclk
= host
->src_clk_freq
>> 2; /* sclk = clk / 4 */
755 div
= (host
->src_clk_freq
+ ((hz
<< 2) - 1)) / (hz
<< 2);
756 sclk
= (host
->src_clk_freq
>> 2) / div
;
760 if (timing
== MMC_TIMING_MMC_HS400
&&
761 hz
>= (host
->src_clk_freq
>> 1)) {
762 if (host
->dev_comp
->clk_div_bits
== 8)
763 sdr_set_bits(host
->base
+ MSDC_CFG
,
764 MSDC_CFG_HS400_CK_MODE
);
766 sdr_set_bits(host
->base
+ MSDC_CFG
,
767 MSDC_CFG_HS400_CK_MODE_EXTRA
);
768 sclk
= host
->src_clk_freq
>> 1;
769 div
= 0; /* div is ignore when bit18 is set */
771 } else if (hz
>= host
->src_clk_freq
) {
772 mode
= 0x1; /* no divisor */
774 sclk
= host
->src_clk_freq
;
776 mode
= 0x0; /* use divisor */
777 if (hz
>= (host
->src_clk_freq
>> 1)) {
778 div
= 0; /* mean div = 1/2 */
779 sclk
= host
->src_clk_freq
>> 1; /* sclk = clk / 2 */
781 div
= (host
->src_clk_freq
+ ((hz
<< 2) - 1)) / (hz
<< 2);
782 sclk
= (host
->src_clk_freq
>> 2) / div
;
785 sdr_clr_bits(host
->base
+ MSDC_CFG
, MSDC_CFG_CKPDN
);
787 * As src_clk/HCLK use the same bit to gate/ungate,
788 * So if want to only gate src_clk, need gate its parent(mux).
790 if (host
->src_clk_cg
)
791 clk_disable_unprepare(host
->src_clk_cg
);
793 clk_disable_unprepare(clk_get_parent(host
->src_clk
));
794 if (host
->dev_comp
->clk_div_bits
== 8)
795 sdr_set_field(host
->base
+ MSDC_CFG
,
796 MSDC_CFG_CKMOD
| MSDC_CFG_CKDIV
,
799 sdr_set_field(host
->base
+ MSDC_CFG
,
800 MSDC_CFG_CKMOD_EXTRA
| MSDC_CFG_CKDIV_EXTRA
,
802 if (host
->src_clk_cg
)
803 clk_prepare_enable(host
->src_clk_cg
);
805 clk_prepare_enable(clk_get_parent(host
->src_clk
));
807 while (!(readl(host
->base
+ MSDC_CFG
) & MSDC_CFG_CKSTB
))
809 sdr_set_bits(host
->base
+ MSDC_CFG
, MSDC_CFG_CKPDN
);
810 host
->mmc
->actual_clock
= sclk
;
812 host
->timing
= timing
;
813 /* need because clk changed. */
814 msdc_set_timeout(host
, host
->timeout_ns
, host
->timeout_clks
);
815 sdr_set_bits(host
->base
+ MSDC_INTEN
, flags
);
818 * mmc_select_hs400() will drop to 50Mhz and High speed mode,
819 * tune result of hs200/200Mhz is not suitable for 50Mhz
821 if (host
->mmc
->actual_clock
<= 52000000) {
822 writel(host
->def_tune_para
.iocon
, host
->base
+ MSDC_IOCON
);
823 if (host
->top_base
) {
824 writel(host
->def_tune_para
.emmc_top_control
,
825 host
->top_base
+ EMMC_TOP_CONTROL
);
826 writel(host
->def_tune_para
.emmc_top_cmd
,
827 host
->top_base
+ EMMC_TOP_CMD
);
829 writel(host
->def_tune_para
.pad_tune
,
830 host
->base
+ tune_reg
);
833 writel(host
->saved_tune_para
.iocon
, host
->base
+ MSDC_IOCON
);
834 writel(host
->saved_tune_para
.pad_cmd_tune
,
835 host
->base
+ PAD_CMD_TUNE
);
836 if (host
->top_base
) {
837 writel(host
->saved_tune_para
.emmc_top_control
,
838 host
->top_base
+ EMMC_TOP_CONTROL
);
839 writel(host
->saved_tune_para
.emmc_top_cmd
,
840 host
->top_base
+ EMMC_TOP_CMD
);
842 writel(host
->saved_tune_para
.pad_tune
,
843 host
->base
+ tune_reg
);
847 if (timing
== MMC_TIMING_MMC_HS400
&&
848 host
->dev_comp
->hs400_tune
)
849 sdr_set_field(host
->base
+ PAD_CMD_TUNE
,
850 MSDC_PAD_TUNE_CMDRRDLY
,
851 host
->hs400_cmd_int_delay
);
852 dev_dbg(host
->dev
, "sclk: %d, timing: %d\n", host
->mmc
->actual_clock
,
856 static inline u32
msdc_cmd_find_resp(struct msdc_host
*host
,
857 struct mmc_request
*mrq
, struct mmc_command
*cmd
)
861 switch (mmc_resp_type(cmd
)) {
862 /* Actually, R1, R5, R6, R7 are the same */
884 static inline u32
msdc_cmd_prepare_raw_cmd(struct msdc_host
*host
,
885 struct mmc_request
*mrq
, struct mmc_command
*cmd
)
888 * vol_swt << 30 | auto_cmd << 28 | blklen << 16 | go_irq << 15 |
889 * stop << 14 | rw << 13 | dtype << 11 | rsptyp << 7 | brk << 6 | opcode
891 u32 opcode
= cmd
->opcode
;
892 u32 resp
= msdc_cmd_find_resp(host
, mrq
, cmd
);
893 u32 rawcmd
= (opcode
& 0x3f) | ((resp
& 0x7) << 7);
895 host
->cmd_rsp
= resp
;
897 if ((opcode
== SD_IO_RW_DIRECT
&& cmd
->flags
== (unsigned int) -1) ||
898 opcode
== MMC_STOP_TRANSMISSION
)
899 rawcmd
|= (0x1 << 14);
900 else if (opcode
== SD_SWITCH_VOLTAGE
)
901 rawcmd
|= (0x1 << 30);
902 else if (opcode
== SD_APP_SEND_SCR
||
903 opcode
== SD_APP_SEND_NUM_WR_BLKS
||
904 (opcode
== SD_SWITCH
&& mmc_cmd_type(cmd
) == MMC_CMD_ADTC
) ||
905 (opcode
== SD_APP_SD_STATUS
&& mmc_cmd_type(cmd
) == MMC_CMD_ADTC
) ||
906 (opcode
== MMC_SEND_EXT_CSD
&& mmc_cmd_type(cmd
) == MMC_CMD_ADTC
))
907 rawcmd
|= (0x1 << 11);
910 struct mmc_data
*data
= cmd
->data
;
912 if (mmc_op_multi(opcode
)) {
913 if (mmc_card_mmc(host
->mmc
->card
) && mrq
->sbc
&&
914 !(mrq
->sbc
->arg
& 0xFFFF0000))
915 rawcmd
|= 0x2 << 28; /* AutoCMD23 */
918 rawcmd
|= ((data
->blksz
& 0xFFF) << 16);
919 if (data
->flags
& MMC_DATA_WRITE
)
920 rawcmd
|= (0x1 << 13);
921 if (data
->blocks
> 1)
922 rawcmd
|= (0x2 << 11);
924 rawcmd
|= (0x1 << 11);
925 /* Always use dma mode */
926 sdr_clr_bits(host
->base
+ MSDC_CFG
, MSDC_CFG_PIO
);
928 if (host
->timeout_ns
!= data
->timeout_ns
||
929 host
->timeout_clks
!= data
->timeout_clks
)
930 msdc_set_timeout(host
, data
->timeout_ns
,
933 writel(data
->blocks
, host
->base
+ SDC_BLK_NUM
);
938 static void msdc_start_data(struct msdc_host
*host
, struct mmc_request
*mrq
,
939 struct mmc_command
*cmd
, struct mmc_data
*data
)
945 read
= data
->flags
& MMC_DATA_READ
;
947 mod_delayed_work(system_wq
, &host
->req_timeout
, DAT_TIMEOUT
);
948 msdc_dma_setup(host
, &host
->dma
, data
);
949 sdr_set_bits(host
->base
+ MSDC_INTEN
, data_ints_mask
);
950 sdr_set_field(host
->base
+ MSDC_DMA_CTRL
, MSDC_DMA_CTRL_START
, 1);
951 dev_dbg(host
->dev
, "DMA start\n");
952 dev_dbg(host
->dev
, "%s: cmd=%d DMA data: %d blocks; read=%d\n",
953 __func__
, cmd
->opcode
, data
->blocks
, read
);
956 static int msdc_auto_cmd_done(struct msdc_host
*host
, int events
,
957 struct mmc_command
*cmd
)
959 u32
*rsp
= cmd
->resp
;
961 rsp
[0] = readl(host
->base
+ SDC_ACMD_RESP
);
963 if (events
& MSDC_INT_ACMDRDY
) {
967 if (events
& MSDC_INT_ACMDCRCERR
) {
968 cmd
->error
= -EILSEQ
;
969 host
->error
|= REQ_STOP_EIO
;
970 } else if (events
& MSDC_INT_ACMDTMO
) {
971 cmd
->error
= -ETIMEDOUT
;
972 host
->error
|= REQ_STOP_TMO
;
975 "%s: AUTO_CMD%d arg=%08X; rsp %08X; cmd_error=%d\n",
976 __func__
, cmd
->opcode
, cmd
->arg
, rsp
[0], cmd
->error
);
981 static void msdc_track_cmd_data(struct msdc_host
*host
,
982 struct mmc_command
*cmd
, struct mmc_data
*data
)
985 dev_dbg(host
->dev
, "%s: cmd=%d arg=%08X; host->error=0x%08X\n",
986 __func__
, cmd
->opcode
, cmd
->arg
, host
->error
);
989 static void msdc_request_done(struct msdc_host
*host
, struct mmc_request
*mrq
)
994 ret
= cancel_delayed_work(&host
->req_timeout
);
996 /* delay work already running */
999 spin_lock_irqsave(&host
->lock
, flags
);
1001 spin_unlock_irqrestore(&host
->lock
, flags
);
1003 msdc_track_cmd_data(host
, mrq
->cmd
, mrq
->data
);
1005 msdc_unprepare_data(host
, mrq
);
1006 mmc_request_done(host
->mmc
, mrq
);
1009 /* returns true if command is fully handled; returns false otherwise */
1010 static bool msdc_cmd_done(struct msdc_host
*host
, int events
,
1011 struct mmc_request
*mrq
, struct mmc_command
*cmd
)
1015 unsigned long flags
;
1016 u32
*rsp
= cmd
->resp
;
1018 if (mrq
->sbc
&& cmd
== mrq
->cmd
&&
1019 (events
& (MSDC_INT_ACMDRDY
| MSDC_INT_ACMDCRCERR
1020 | MSDC_INT_ACMDTMO
)))
1021 msdc_auto_cmd_done(host
, events
, mrq
->sbc
);
1023 sbc_error
= mrq
->sbc
&& mrq
->sbc
->error
;
1025 if (!sbc_error
&& !(events
& (MSDC_INT_CMDRDY
1026 | MSDC_INT_RSPCRCERR
1027 | MSDC_INT_CMDTMO
)))
1030 spin_lock_irqsave(&host
->lock
, flags
);
1033 spin_unlock_irqrestore(&host
->lock
, flags
);
1038 sdr_clr_bits(host
->base
+ MSDC_INTEN
, cmd_ints_mask
);
1040 if (cmd
->flags
& MMC_RSP_PRESENT
) {
1041 if (cmd
->flags
& MMC_RSP_136
) {
1042 rsp
[0] = readl(host
->base
+ SDC_RESP3
);
1043 rsp
[1] = readl(host
->base
+ SDC_RESP2
);
1044 rsp
[2] = readl(host
->base
+ SDC_RESP1
);
1045 rsp
[3] = readl(host
->base
+ SDC_RESP0
);
1047 rsp
[0] = readl(host
->base
+ SDC_RESP0
);
1051 if (!sbc_error
&& !(events
& MSDC_INT_CMDRDY
)) {
1052 if (cmd
->opcode
!= MMC_SEND_TUNING_BLOCK
&&
1053 cmd
->opcode
!= MMC_SEND_TUNING_BLOCK_HS200
)
1055 * should not clear fifo/interrupt as the tune data
1056 * may have alreay come.
1058 msdc_reset_hw(host
);
1059 if (events
& MSDC_INT_RSPCRCERR
) {
1060 cmd
->error
= -EILSEQ
;
1061 host
->error
|= REQ_CMD_EIO
;
1062 } else if (events
& MSDC_INT_CMDTMO
) {
1063 cmd
->error
= -ETIMEDOUT
;
1064 host
->error
|= REQ_CMD_TMO
;
1069 "%s: cmd=%d arg=%08X; rsp %08X; cmd_error=%d\n",
1070 __func__
, cmd
->opcode
, cmd
->arg
, rsp
[0],
1073 msdc_cmd_next(host
, mrq
, cmd
);
1077 /* It is the core layer's responsibility to ensure card status
1078 * is correct before issue a request. but host design do below
1079 * checks recommended.
1081 static inline bool msdc_cmd_is_ready(struct msdc_host
*host
,
1082 struct mmc_request
*mrq
, struct mmc_command
*cmd
)
1084 /* The max busy time we can endure is 20ms */
1085 unsigned long tmo
= jiffies
+ msecs_to_jiffies(20);
1087 while ((readl(host
->base
+ SDC_STS
) & SDC_STS_CMDBUSY
) &&
1088 time_before(jiffies
, tmo
))
1090 if (readl(host
->base
+ SDC_STS
) & SDC_STS_CMDBUSY
) {
1091 dev_err(host
->dev
, "CMD bus busy detected\n");
1092 host
->error
|= REQ_CMD_BUSY
;
1093 msdc_cmd_done(host
, MSDC_INT_CMDTMO
, mrq
, cmd
);
1097 if (mmc_resp_type(cmd
) == MMC_RSP_R1B
|| cmd
->data
) {
1098 tmo
= jiffies
+ msecs_to_jiffies(20);
1099 /* R1B or with data, should check SDCBUSY */
1100 while ((readl(host
->base
+ SDC_STS
) & SDC_STS_SDCBUSY
) &&
1101 time_before(jiffies
, tmo
))
1103 if (readl(host
->base
+ SDC_STS
) & SDC_STS_SDCBUSY
) {
1104 dev_err(host
->dev
, "Controller busy detected\n");
1105 host
->error
|= REQ_CMD_BUSY
;
1106 msdc_cmd_done(host
, MSDC_INT_CMDTMO
, mrq
, cmd
);
1113 static void msdc_start_command(struct msdc_host
*host
,
1114 struct mmc_request
*mrq
, struct mmc_command
*cmd
)
1121 mod_delayed_work(system_wq
, &host
->req_timeout
, DAT_TIMEOUT
);
1122 if (!msdc_cmd_is_ready(host
, mrq
, cmd
))
1125 if ((readl(host
->base
+ MSDC_FIFOCS
) & MSDC_FIFOCS_TXCNT
) >> 16 ||
1126 readl(host
->base
+ MSDC_FIFOCS
) & MSDC_FIFOCS_RXCNT
) {
1127 dev_err(host
->dev
, "TX/RX FIFO non-empty before start of IO. Reset\n");
1128 msdc_reset_hw(host
);
1132 rawcmd
= msdc_cmd_prepare_raw_cmd(host
, mrq
, cmd
);
1134 sdr_set_bits(host
->base
+ MSDC_INTEN
, cmd_ints_mask
);
1135 writel(cmd
->arg
, host
->base
+ SDC_ARG
);
1136 writel(rawcmd
, host
->base
+ SDC_CMD
);
1139 static void msdc_cmd_next(struct msdc_host
*host
,
1140 struct mmc_request
*mrq
, struct mmc_command
*cmd
)
1143 !(cmd
->error
== -EILSEQ
&&
1144 (cmd
->opcode
== MMC_SEND_TUNING_BLOCK
||
1145 cmd
->opcode
== MMC_SEND_TUNING_BLOCK_HS200
))) ||
1146 (mrq
->sbc
&& mrq
->sbc
->error
))
1147 msdc_request_done(host
, mrq
);
1148 else if (cmd
== mrq
->sbc
)
1149 msdc_start_command(host
, mrq
, mrq
->cmd
);
1150 else if (!cmd
->data
)
1151 msdc_request_done(host
, mrq
);
1153 msdc_start_data(host
, mrq
, cmd
, cmd
->data
);
1156 static void msdc_ops_request(struct mmc_host
*mmc
, struct mmc_request
*mrq
)
1158 struct msdc_host
*host
= mmc_priv(mmc
);
1165 msdc_prepare_data(host
, mrq
);
1167 /* if SBC is required, we have HW option and SW option.
1168 * if HW option is enabled, and SBC does not have "special" flags,
1169 * use HW option, otherwise use SW option
1171 if (mrq
->sbc
&& (!mmc_card_mmc(mmc
->card
) ||
1172 (mrq
->sbc
->arg
& 0xFFFF0000)))
1173 msdc_start_command(host
, mrq
, mrq
->sbc
);
1175 msdc_start_command(host
, mrq
, mrq
->cmd
);
1178 static void msdc_pre_req(struct mmc_host
*mmc
, struct mmc_request
*mrq
)
1180 struct msdc_host
*host
= mmc_priv(mmc
);
1181 struct mmc_data
*data
= mrq
->data
;
1186 msdc_prepare_data(host
, mrq
);
1187 data
->host_cookie
|= MSDC_ASYNC_FLAG
;
1190 static void msdc_post_req(struct mmc_host
*mmc
, struct mmc_request
*mrq
,
1193 struct msdc_host
*host
= mmc_priv(mmc
);
1194 struct mmc_data
*data
;
1199 if (data
->host_cookie
) {
1200 data
->host_cookie
&= ~MSDC_ASYNC_FLAG
;
1201 msdc_unprepare_data(host
, mrq
);
1205 static void msdc_data_xfer_next(struct msdc_host
*host
,
1206 struct mmc_request
*mrq
, struct mmc_data
*data
)
1208 if (mmc_op_multi(mrq
->cmd
->opcode
) && mrq
->stop
&& !mrq
->stop
->error
&&
1210 msdc_start_command(host
, mrq
, mrq
->stop
);
1212 msdc_request_done(host
, mrq
);
1215 static bool msdc_data_xfer_done(struct msdc_host
*host
, u32 events
,
1216 struct mmc_request
*mrq
, struct mmc_data
*data
)
1218 struct mmc_command
*stop
= data
->stop
;
1219 unsigned long flags
;
1221 unsigned int check_data
= events
&
1222 (MSDC_INT_XFER_COMPL
| MSDC_INT_DATCRCERR
| MSDC_INT_DATTMO
1223 | MSDC_INT_DMA_BDCSERR
| MSDC_INT_DMA_GPDCSERR
1224 | MSDC_INT_DMA_PROTECT
);
1226 spin_lock_irqsave(&host
->lock
, flags
);
1230 spin_unlock_irqrestore(&host
->lock
, flags
);
1235 if (check_data
|| (stop
&& stop
->error
)) {
1236 dev_dbg(host
->dev
, "DMA status: 0x%8X\n",
1237 readl(host
->base
+ MSDC_DMA_CFG
));
1238 sdr_set_field(host
->base
+ MSDC_DMA_CTRL
, MSDC_DMA_CTRL_STOP
,
1240 while (readl(host
->base
+ MSDC_DMA_CFG
) & MSDC_DMA_CFG_STS
)
1242 sdr_clr_bits(host
->base
+ MSDC_INTEN
, data_ints_mask
);
1243 dev_dbg(host
->dev
, "DMA stop\n");
1245 if ((events
& MSDC_INT_XFER_COMPL
) && (!stop
|| !stop
->error
)) {
1246 data
->bytes_xfered
= data
->blocks
* data
->blksz
;
1248 dev_dbg(host
->dev
, "interrupt events: %x\n", events
);
1249 msdc_reset_hw(host
);
1250 host
->error
|= REQ_DAT_ERR
;
1251 data
->bytes_xfered
= 0;
1253 if (events
& MSDC_INT_DATTMO
)
1254 data
->error
= -ETIMEDOUT
;
1255 else if (events
& MSDC_INT_DATCRCERR
)
1256 data
->error
= -EILSEQ
;
1258 dev_dbg(host
->dev
, "%s: cmd=%d; blocks=%d",
1259 __func__
, mrq
->cmd
->opcode
, data
->blocks
);
1260 dev_dbg(host
->dev
, "data_error=%d xfer_size=%d\n",
1261 (int)data
->error
, data
->bytes_xfered
);
1264 msdc_data_xfer_next(host
, mrq
, data
);
1270 static void msdc_set_buswidth(struct msdc_host
*host
, u32 width
)
1272 u32 val
= readl(host
->base
+ SDC_CFG
);
1274 val
&= ~SDC_CFG_BUSWIDTH
;
1278 case MMC_BUS_WIDTH_1
:
1279 val
|= (MSDC_BUS_1BITS
<< 16);
1281 case MMC_BUS_WIDTH_4
:
1282 val
|= (MSDC_BUS_4BITS
<< 16);
1284 case MMC_BUS_WIDTH_8
:
1285 val
|= (MSDC_BUS_8BITS
<< 16);
1289 writel(val
, host
->base
+ SDC_CFG
);
1290 dev_dbg(host
->dev
, "Bus Width = %d", width
);
1293 static int msdc_ops_switch_volt(struct mmc_host
*mmc
, struct mmc_ios
*ios
)
1295 struct msdc_host
*host
= mmc_priv(mmc
);
1298 if (!IS_ERR(mmc
->supply
.vqmmc
)) {
1299 if (ios
->signal_voltage
!= MMC_SIGNAL_VOLTAGE_330
&&
1300 ios
->signal_voltage
!= MMC_SIGNAL_VOLTAGE_180
) {
1301 dev_err(host
->dev
, "Unsupported signal voltage!\n");
1305 ret
= mmc_regulator_set_vqmmc(mmc
, ios
);
1307 dev_dbg(host
->dev
, "Regulator set error %d (%d)\n",
1308 ret
, ios
->signal_voltage
);
1310 /* Apply different pinctrl settings for different signal voltage */
1311 if (ios
->signal_voltage
== MMC_SIGNAL_VOLTAGE_180
)
1312 pinctrl_select_state(host
->pinctrl
, host
->pins_uhs
);
1314 pinctrl_select_state(host
->pinctrl
, host
->pins_default
);
1320 static int msdc_card_busy(struct mmc_host
*mmc
)
1322 struct msdc_host
*host
= mmc_priv(mmc
);
1323 u32 status
= readl(host
->base
+ MSDC_PS
);
1325 /* only check if data0 is low */
1326 return !(status
& BIT(16));
1329 static void msdc_request_timeout(struct work_struct
*work
)
1331 struct msdc_host
*host
= container_of(work
, struct msdc_host
,
1334 /* simulate HW timeout status */
1335 dev_err(host
->dev
, "%s: aborting cmd/data/mrq\n", __func__
);
1337 dev_err(host
->dev
, "%s: aborting mrq=%p cmd=%d\n", __func__
,
1338 host
->mrq
, host
->mrq
->cmd
->opcode
);
1340 dev_err(host
->dev
, "%s: aborting cmd=%d\n",
1341 __func__
, host
->cmd
->opcode
);
1342 msdc_cmd_done(host
, MSDC_INT_CMDTMO
, host
->mrq
,
1344 } else if (host
->data
) {
1345 dev_err(host
->dev
, "%s: abort data: cmd%d; %d blocks\n",
1346 __func__
, host
->mrq
->cmd
->opcode
,
1347 host
->data
->blocks
);
1348 msdc_data_xfer_done(host
, MSDC_INT_DATTMO
, host
->mrq
,
1354 static irqreturn_t
msdc_irq(int irq
, void *dev_id
)
1356 struct msdc_host
*host
= (struct msdc_host
*) dev_id
;
1359 unsigned long flags
;
1360 struct mmc_request
*mrq
;
1361 struct mmc_command
*cmd
;
1362 struct mmc_data
*data
;
1363 u32 events
, event_mask
;
1365 spin_lock_irqsave(&host
->lock
, flags
);
1366 events
= readl(host
->base
+ MSDC_INT
);
1367 event_mask
= readl(host
->base
+ MSDC_INTEN
);
1368 /* clear interrupts */
1369 writel(events
& event_mask
, host
->base
+ MSDC_INT
);
1374 spin_unlock_irqrestore(&host
->lock
, flags
);
1376 if (!(events
& event_mask
))
1381 "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
1382 __func__
, events
, event_mask
);
1387 dev_dbg(host
->dev
, "%s: events=%08X\n", __func__
, events
);
1390 msdc_cmd_done(host
, events
, mrq
, cmd
);
1392 msdc_data_xfer_done(host
, events
, mrq
, data
);
1398 static void msdc_init_hw(struct msdc_host
*host
)
1401 u32 tune_reg
= host
->dev_comp
->pad_tune_reg
;
1403 /* Configure to MMC/SD mode, clock free running */
1404 sdr_set_bits(host
->base
+ MSDC_CFG
, MSDC_CFG_MODE
| MSDC_CFG_CKPDN
);
1407 msdc_reset_hw(host
);
1409 /* Disable card detection */
1410 sdr_clr_bits(host
->base
+ MSDC_PS
, MSDC_PS_CDEN
);
1412 /* Disable and clear all interrupts */
1413 writel(0, host
->base
+ MSDC_INTEN
);
1414 val
= readl(host
->base
+ MSDC_INT
);
1415 writel(val
, host
->base
+ MSDC_INT
);
1417 if (host
->top_base
) {
1418 writel(0, host
->top_base
+ EMMC_TOP_CONTROL
);
1419 writel(0, host
->top_base
+ EMMC_TOP_CMD
);
1421 writel(0, host
->base
+ tune_reg
);
1423 writel(0, host
->base
+ MSDC_IOCON
);
1424 sdr_set_field(host
->base
+ MSDC_IOCON
, MSDC_IOCON_DDLSEL
, 0);
1425 writel(0x403c0046, host
->base
+ MSDC_PATCH_BIT
);
1426 sdr_set_field(host
->base
+ MSDC_PATCH_BIT
, MSDC_CKGEN_MSDC_DLY_SEL
, 1);
1427 writel(0xffff4089, host
->base
+ MSDC_PATCH_BIT1
);
1428 sdr_set_bits(host
->base
+ EMMC50_CFG0
, EMMC50_CFG_CFCSTS_SEL
);
1430 if (host
->dev_comp
->stop_clk_fix
) {
1431 sdr_set_field(host
->base
+ MSDC_PATCH_BIT1
,
1432 MSDC_PATCH_BIT1_STOP_DLY
, 3);
1433 sdr_clr_bits(host
->base
+ SDC_FIFO_CFG
,
1434 SDC_FIFO_CFG_WRVALIDSEL
);
1435 sdr_clr_bits(host
->base
+ SDC_FIFO_CFG
,
1436 SDC_FIFO_CFG_RDVALIDSEL
);
1439 if (host
->dev_comp
->busy_check
)
1440 sdr_clr_bits(host
->base
+ MSDC_PATCH_BIT1
, (1 << 7));
1442 if (host
->dev_comp
->async_fifo
) {
1443 sdr_set_field(host
->base
+ MSDC_PATCH_BIT2
,
1444 MSDC_PB2_RESPWAIT
, 3);
1445 if (host
->dev_comp
->enhance_rx
) {
1447 sdr_set_bits(host
->top_base
+ EMMC_TOP_CONTROL
,
1450 sdr_set_bits(host
->base
+ SDC_ADV_CFG0
,
1453 sdr_set_field(host
->base
+ MSDC_PATCH_BIT2
,
1454 MSDC_PB2_RESPSTSENSEL
, 2);
1455 sdr_set_field(host
->base
+ MSDC_PATCH_BIT2
,
1456 MSDC_PB2_CRCSTSENSEL
, 2);
1458 /* use async fifo, then no need tune internal delay */
1459 sdr_clr_bits(host
->base
+ MSDC_PATCH_BIT2
,
1460 MSDC_PATCH_BIT2_CFGRESP
);
1461 sdr_set_bits(host
->base
+ MSDC_PATCH_BIT2
,
1462 MSDC_PATCH_BIT2_CFGCRCSTS
);
1465 if (host
->dev_comp
->support_64g
)
1466 sdr_set_bits(host
->base
+ MSDC_PATCH_BIT2
,
1467 MSDC_PB2_SUPPORT_64G
);
1468 if (host
->dev_comp
->data_tune
) {
1469 if (host
->top_base
) {
1470 sdr_set_bits(host
->top_base
+ EMMC_TOP_CONTROL
,
1471 PAD_DAT_RD_RXDLY_SEL
);
1472 sdr_clr_bits(host
->top_base
+ EMMC_TOP_CONTROL
,
1474 sdr_set_bits(host
->top_base
+ EMMC_TOP_CMD
,
1475 PAD_CMD_RD_RXDLY_SEL
);
1477 sdr_set_bits(host
->base
+ tune_reg
,
1478 MSDC_PAD_TUNE_RD_SEL
|
1479 MSDC_PAD_TUNE_CMD_SEL
);
1482 /* choose clock tune */
1484 sdr_set_bits(host
->top_base
+ EMMC_TOP_CONTROL
,
1487 sdr_set_bits(host
->base
+ tune_reg
,
1488 MSDC_PAD_TUNE_RXDLYSEL
);
1491 /* Configure to enable SDIO mode.
1492 * it's must otherwise sdio cmd5 failed
1494 sdr_set_bits(host
->base
+ SDC_CFG
, SDC_CFG_SDIO
);
1496 /* disable detect SDIO device interrupt function */
1497 sdr_clr_bits(host
->base
+ SDC_CFG
, SDC_CFG_SDIOIDE
);
1499 /* Configure to default data timeout */
1500 sdr_set_field(host
->base
+ SDC_CFG
, SDC_CFG_DTOC
, 3);
1502 host
->def_tune_para
.iocon
= readl(host
->base
+ MSDC_IOCON
);
1503 host
->saved_tune_para
.iocon
= readl(host
->base
+ MSDC_IOCON
);
1504 if (host
->top_base
) {
1505 host
->def_tune_para
.emmc_top_control
=
1506 readl(host
->top_base
+ EMMC_TOP_CONTROL
);
1507 host
->def_tune_para
.emmc_top_cmd
=
1508 readl(host
->top_base
+ EMMC_TOP_CMD
);
1509 host
->saved_tune_para
.emmc_top_control
=
1510 readl(host
->top_base
+ EMMC_TOP_CONTROL
);
1511 host
->saved_tune_para
.emmc_top_cmd
=
1512 readl(host
->top_base
+ EMMC_TOP_CMD
);
1514 host
->def_tune_para
.pad_tune
= readl(host
->base
+ tune_reg
);
1515 host
->saved_tune_para
.pad_tune
= readl(host
->base
+ tune_reg
);
1517 dev_dbg(host
->dev
, "init hardware done!");
1520 static void msdc_deinit_hw(struct msdc_host
*host
)
1523 /* Disable and clear all interrupts */
1524 writel(0, host
->base
+ MSDC_INTEN
);
1526 val
= readl(host
->base
+ MSDC_INT
);
1527 writel(val
, host
->base
+ MSDC_INT
);
1530 /* init gpd and bd list in msdc_drv_probe */
1531 static void msdc_init_gpd_bd(struct msdc_host
*host
, struct msdc_dma
*dma
)
1533 struct mt_gpdma_desc
*gpd
= dma
->gpd
;
1534 struct mt_bdma_desc
*bd
= dma
->bd
;
1535 dma_addr_t dma_addr
;
1538 memset(gpd
, 0, sizeof(struct mt_gpdma_desc
) * 2);
1540 dma_addr
= dma
->gpd_addr
+ sizeof(struct mt_gpdma_desc
);
1541 gpd
->gpd_info
= GPDMA_DESC_BDP
; /* hwo, cs, bd pointer */
1542 /* gpd->next is must set for desc DMA
1543 * That's why must alloc 2 gpd structure.
1545 gpd
->next
= lower_32_bits(dma_addr
);
1546 if (host
->dev_comp
->support_64g
)
1547 gpd
->gpd_info
|= (upper_32_bits(dma_addr
) & 0xf) << 24;
1549 dma_addr
= dma
->bd_addr
;
1550 gpd
->ptr
= lower_32_bits(dma
->bd_addr
); /* physical address */
1551 if (host
->dev_comp
->support_64g
)
1552 gpd
->gpd_info
|= (upper_32_bits(dma_addr
) & 0xf) << 28;
1554 memset(bd
, 0, sizeof(struct mt_bdma_desc
) * MAX_BD_NUM
);
1555 for (i
= 0; i
< (MAX_BD_NUM
- 1); i
++) {
1556 dma_addr
= dma
->bd_addr
+ sizeof(*bd
) * (i
+ 1);
1557 bd
[i
].next
= lower_32_bits(dma_addr
);
1558 if (host
->dev_comp
->support_64g
)
1559 bd
[i
].bd_info
|= (upper_32_bits(dma_addr
) & 0xf) << 24;
1563 static void msdc_ops_set_ios(struct mmc_host
*mmc
, struct mmc_ios
*ios
)
1565 struct msdc_host
*host
= mmc_priv(mmc
);
1568 msdc_set_buswidth(host
, ios
->bus_width
);
1570 /* Suspend/Resume will do power off/on */
1571 switch (ios
->power_mode
) {
1573 if (!IS_ERR(mmc
->supply
.vmmc
)) {
1575 ret
= mmc_regulator_set_ocr(mmc
, mmc
->supply
.vmmc
,
1578 dev_err(host
->dev
, "Failed to set vmmc power!\n");
1584 if (!IS_ERR(mmc
->supply
.vqmmc
) && !host
->vqmmc_enabled
) {
1585 ret
= regulator_enable(mmc
->supply
.vqmmc
);
1587 dev_err(host
->dev
, "Failed to set vqmmc power!\n");
1589 host
->vqmmc_enabled
= true;
1593 if (!IS_ERR(mmc
->supply
.vmmc
))
1594 mmc_regulator_set_ocr(mmc
, mmc
->supply
.vmmc
, 0);
1596 if (!IS_ERR(mmc
->supply
.vqmmc
) && host
->vqmmc_enabled
) {
1597 regulator_disable(mmc
->supply
.vqmmc
);
1598 host
->vqmmc_enabled
= false;
1605 if (host
->mclk
!= ios
->clock
|| host
->timing
!= ios
->timing
)
1606 msdc_set_mclk(host
, ios
->timing
, ios
->clock
);
1609 static u32
test_delay_bit(u32 delay
, u32 bit
)
1611 bit
%= PAD_DELAY_MAX
;
1612 return delay
& (1 << bit
);
1615 static int get_delay_len(u32 delay
, u32 start_bit
)
1619 for (i
= 0; i
< (PAD_DELAY_MAX
- start_bit
); i
++) {
1620 if (test_delay_bit(delay
, start_bit
+ i
) == 0)
1623 return PAD_DELAY_MAX
- start_bit
;
1626 static struct msdc_delay_phase
get_best_delay(struct msdc_host
*host
, u32 delay
)
1628 int start
= 0, len
= 0;
1629 int start_final
= 0, len_final
= 0;
1630 u8 final_phase
= 0xff;
1631 struct msdc_delay_phase delay_phase
= { 0, };
1634 dev_err(host
->dev
, "phase error: [map:%x]\n", delay
);
1635 delay_phase
.final_phase
= final_phase
;
1639 while (start
< PAD_DELAY_MAX
) {
1640 len
= get_delay_len(delay
, start
);
1641 if (len_final
< len
) {
1642 start_final
= start
;
1645 start
+= len
? len
: 1;
1646 if (len
>= 12 && start_final
< 4)
1650 /* The rule is that to find the smallest delay cell */
1651 if (start_final
== 0)
1652 final_phase
= (start_final
+ len_final
/ 3) % PAD_DELAY_MAX
;
1654 final_phase
= (start_final
+ len_final
/ 2) % PAD_DELAY_MAX
;
1655 dev_info(host
->dev
, "phase: [map:%x] [maxlen:%d] [final:%d]\n",
1656 delay
, len_final
, final_phase
);
1658 delay_phase
.maxlen
= len_final
;
1659 delay_phase
.start
= start_final
;
1660 delay_phase
.final_phase
= final_phase
;
1664 static inline void msdc_set_cmd_delay(struct msdc_host
*host
, u32 value
)
1666 u32 tune_reg
= host
->dev_comp
->pad_tune_reg
;
1669 sdr_set_field(host
->top_base
+ EMMC_TOP_CMD
, PAD_CMD_RXDLY
,
1672 sdr_set_field(host
->base
+ tune_reg
, MSDC_PAD_TUNE_CMDRDLY
,
1676 static inline void msdc_set_data_delay(struct msdc_host
*host
, u32 value
)
1678 u32 tune_reg
= host
->dev_comp
->pad_tune_reg
;
1681 sdr_set_field(host
->top_base
+ EMMC_TOP_CONTROL
,
1682 PAD_DAT_RD_RXDLY
, value
);
1684 sdr_set_field(host
->base
+ tune_reg
, MSDC_PAD_TUNE_DATRRDLY
,
1688 static int msdc_tune_response(struct mmc_host
*mmc
, u32 opcode
)
1690 struct msdc_host
*host
= mmc_priv(mmc
);
1691 u32 rise_delay
= 0, fall_delay
= 0;
1692 struct msdc_delay_phase final_rise_delay
, final_fall_delay
= { 0,};
1693 struct msdc_delay_phase internal_delay_phase
;
1694 u8 final_delay
, final_maxlen
;
1695 u32 internal_delay
= 0;
1696 u32 tune_reg
= host
->dev_comp
->pad_tune_reg
;
1700 if (mmc
->ios
.timing
== MMC_TIMING_MMC_HS200
||
1701 mmc
->ios
.timing
== MMC_TIMING_UHS_SDR104
)
1702 sdr_set_field(host
->base
+ tune_reg
,
1703 MSDC_PAD_TUNE_CMDRRDLY
,
1704 host
->hs200_cmd_int_delay
);
1706 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1707 for (i
= 0 ; i
< PAD_DELAY_MAX
; i
++) {
1708 msdc_set_cmd_delay(host
, i
);
1710 * Using the same parameters, it may sometimes pass the test,
1711 * but sometimes it may fail. To make sure the parameters are
1712 * more stable, we test each set of parameters 3 times.
1714 for (j
= 0; j
< 3; j
++) {
1715 mmc_send_tuning(mmc
, opcode
, &cmd_err
);
1717 rise_delay
|= (1 << i
);
1719 rise_delay
&= ~(1 << i
);
1724 final_rise_delay
= get_best_delay(host
, rise_delay
);
1725 /* if rising edge has enough margin, then do not scan falling edge */
1726 if (final_rise_delay
.maxlen
>= 12 ||
1727 (final_rise_delay
.start
== 0 && final_rise_delay
.maxlen
>= 4))
1730 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1731 for (i
= 0; i
< PAD_DELAY_MAX
; i
++) {
1732 msdc_set_cmd_delay(host
, i
);
1734 * Using the same parameters, it may sometimes pass the test,
1735 * but sometimes it may fail. To make sure the parameters are
1736 * more stable, we test each set of parameters 3 times.
1738 for (j
= 0; j
< 3; j
++) {
1739 mmc_send_tuning(mmc
, opcode
, &cmd_err
);
1741 fall_delay
|= (1 << i
);
1743 fall_delay
&= ~(1 << i
);
1748 final_fall_delay
= get_best_delay(host
, fall_delay
);
1751 final_maxlen
= max(final_rise_delay
.maxlen
, final_fall_delay
.maxlen
);
1752 if (final_fall_delay
.maxlen
>= 12 && final_fall_delay
.start
< 4)
1753 final_maxlen
= final_fall_delay
.maxlen
;
1754 if (final_maxlen
== final_rise_delay
.maxlen
) {
1755 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1756 final_delay
= final_rise_delay
.final_phase
;
1758 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1759 final_delay
= final_fall_delay
.final_phase
;
1761 msdc_set_cmd_delay(host
, final_delay
);
1763 if (host
->dev_comp
->async_fifo
|| host
->hs200_cmd_int_delay
)
1766 for (i
= 0; i
< PAD_DELAY_MAX
; i
++) {
1767 sdr_set_field(host
->base
+ tune_reg
,
1768 MSDC_PAD_TUNE_CMDRRDLY
, i
);
1769 mmc_send_tuning(mmc
, opcode
, &cmd_err
);
1771 internal_delay
|= (1 << i
);
1773 dev_dbg(host
->dev
, "Final internal delay: 0x%x\n", internal_delay
);
1774 internal_delay_phase
= get_best_delay(host
, internal_delay
);
1775 sdr_set_field(host
->base
+ tune_reg
, MSDC_PAD_TUNE_CMDRRDLY
,
1776 internal_delay_phase
.final_phase
);
1778 dev_dbg(host
->dev
, "Final cmd pad delay: %x\n", final_delay
);
1779 return final_delay
== 0xff ? -EIO
: 0;
1782 static int hs400_tune_response(struct mmc_host
*mmc
, u32 opcode
)
1784 struct msdc_host
*host
= mmc_priv(mmc
);
1786 struct msdc_delay_phase final_cmd_delay
= { 0,};
1791 /* select EMMC50 PAD CMD tune */
1792 sdr_set_bits(host
->base
+ PAD_CMD_TUNE
, BIT(0));
1794 if (mmc
->ios
.timing
== MMC_TIMING_MMC_HS200
||
1795 mmc
->ios
.timing
== MMC_TIMING_UHS_SDR104
)
1796 sdr_set_field(host
->base
+ MSDC_PAD_TUNE
,
1797 MSDC_PAD_TUNE_CMDRRDLY
,
1798 host
->hs200_cmd_int_delay
);
1800 if (host
->hs400_cmd_resp_sel_rising
)
1801 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1803 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1804 for (i
= 0 ; i
< PAD_DELAY_MAX
; i
++) {
1805 sdr_set_field(host
->base
+ PAD_CMD_TUNE
,
1806 PAD_CMD_TUNE_RX_DLY3
, i
);
1808 * Using the same parameters, it may sometimes pass the test,
1809 * but sometimes it may fail. To make sure the parameters are
1810 * more stable, we test each set of parameters 3 times.
1812 for (j
= 0; j
< 3; j
++) {
1813 mmc_send_tuning(mmc
, opcode
, &cmd_err
);
1815 cmd_delay
|= (1 << i
);
1817 cmd_delay
&= ~(1 << i
);
1822 final_cmd_delay
= get_best_delay(host
, cmd_delay
);
1823 sdr_set_field(host
->base
+ PAD_CMD_TUNE
, PAD_CMD_TUNE_RX_DLY3
,
1824 final_cmd_delay
.final_phase
);
1825 final_delay
= final_cmd_delay
.final_phase
;
1827 dev_dbg(host
->dev
, "Final cmd pad delay: %x\n", final_delay
);
1828 return final_delay
== 0xff ? -EIO
: 0;
1831 static int msdc_tune_data(struct mmc_host
*mmc
, u32 opcode
)
1833 struct msdc_host
*host
= mmc_priv(mmc
);
1834 u32 rise_delay
= 0, fall_delay
= 0;
1835 struct msdc_delay_phase final_rise_delay
, final_fall_delay
= { 0,};
1836 u8 final_delay
, final_maxlen
;
1839 sdr_set_field(host
->base
+ MSDC_PATCH_BIT
, MSDC_INT_DAT_LATCH_CK_SEL
,
1841 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_DSPL
);
1842 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_W_DSPL
);
1843 for (i
= 0 ; i
< PAD_DELAY_MAX
; i
++) {
1844 msdc_set_data_delay(host
, i
);
1845 ret
= mmc_send_tuning(mmc
, opcode
, NULL
);
1847 rise_delay
|= (1 << i
);
1849 final_rise_delay
= get_best_delay(host
, rise_delay
);
1850 /* if rising edge has enough margin, then do not scan falling edge */
1851 if (final_rise_delay
.maxlen
>= 12 ||
1852 (final_rise_delay
.start
== 0 && final_rise_delay
.maxlen
>= 4))
1855 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_DSPL
);
1856 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_W_DSPL
);
1857 for (i
= 0; i
< PAD_DELAY_MAX
; i
++) {
1858 msdc_set_data_delay(host
, i
);
1859 ret
= mmc_send_tuning(mmc
, opcode
, NULL
);
1861 fall_delay
|= (1 << i
);
1863 final_fall_delay
= get_best_delay(host
, fall_delay
);
1866 final_maxlen
= max(final_rise_delay
.maxlen
, final_fall_delay
.maxlen
);
1867 if (final_maxlen
== final_rise_delay
.maxlen
) {
1868 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_DSPL
);
1869 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_W_DSPL
);
1870 final_delay
= final_rise_delay
.final_phase
;
1872 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_DSPL
);
1873 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_W_DSPL
);
1874 final_delay
= final_fall_delay
.final_phase
;
1876 msdc_set_data_delay(host
, final_delay
);
1878 dev_dbg(host
->dev
, "Final data pad delay: %x\n", final_delay
);
1879 return final_delay
== 0xff ? -EIO
: 0;
1883 * MSDC IP which supports data tune + async fifo can do CMD/DAT tune
1884 * together, which can save the tuning time.
1886 static int msdc_tune_together(struct mmc_host
*mmc
, u32 opcode
)
1888 struct msdc_host
*host
= mmc_priv(mmc
);
1889 u32 rise_delay
= 0, fall_delay
= 0;
1890 struct msdc_delay_phase final_rise_delay
, final_fall_delay
= { 0,};
1891 u8 final_delay
, final_maxlen
;
1894 sdr_set_field(host
->base
+ MSDC_PATCH_BIT
, MSDC_INT_DAT_LATCH_CK_SEL
,
1897 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1898 sdr_clr_bits(host
->base
+ MSDC_IOCON
,
1899 MSDC_IOCON_DSPL
| MSDC_IOCON_W_DSPL
);
1900 for (i
= 0 ; i
< PAD_DELAY_MAX
; i
++) {
1901 msdc_set_cmd_delay(host
, i
);
1902 msdc_set_data_delay(host
, i
);
1903 ret
= mmc_send_tuning(mmc
, opcode
, NULL
);
1905 rise_delay
|= (1 << i
);
1907 final_rise_delay
= get_best_delay(host
, rise_delay
);
1908 /* if rising edge has enough margin, then do not scan falling edge */
1909 if (final_rise_delay
.maxlen
>= 12 ||
1910 (final_rise_delay
.start
== 0 && final_rise_delay
.maxlen
>= 4))
1913 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1914 sdr_set_bits(host
->base
+ MSDC_IOCON
,
1915 MSDC_IOCON_DSPL
| MSDC_IOCON_W_DSPL
);
1916 for (i
= 0; i
< PAD_DELAY_MAX
; i
++) {
1917 msdc_set_cmd_delay(host
, i
);
1918 msdc_set_data_delay(host
, i
);
1919 ret
= mmc_send_tuning(mmc
, opcode
, NULL
);
1921 fall_delay
|= (1 << i
);
1923 final_fall_delay
= get_best_delay(host
, fall_delay
);
1926 final_maxlen
= max(final_rise_delay
.maxlen
, final_fall_delay
.maxlen
);
1927 if (final_maxlen
== final_rise_delay
.maxlen
) {
1928 sdr_clr_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1929 sdr_clr_bits(host
->base
+ MSDC_IOCON
,
1930 MSDC_IOCON_DSPL
| MSDC_IOCON_W_DSPL
);
1931 final_delay
= final_rise_delay
.final_phase
;
1933 sdr_set_bits(host
->base
+ MSDC_IOCON
, MSDC_IOCON_RSPL
);
1934 sdr_set_bits(host
->base
+ MSDC_IOCON
,
1935 MSDC_IOCON_DSPL
| MSDC_IOCON_W_DSPL
);
1936 final_delay
= final_fall_delay
.final_phase
;
1939 msdc_set_cmd_delay(host
, final_delay
);
1940 msdc_set_data_delay(host
, final_delay
);
1942 dev_dbg(host
->dev
, "Final pad delay: %x\n", final_delay
);
1943 return final_delay
== 0xff ? -EIO
: 0;
1946 static int msdc_execute_tuning(struct mmc_host
*mmc
, u32 opcode
)
1948 struct msdc_host
*host
= mmc_priv(mmc
);
1950 u32 tune_reg
= host
->dev_comp
->pad_tune_reg
;
1952 if (host
->dev_comp
->data_tune
&& host
->dev_comp
->async_fifo
) {
1953 ret
= msdc_tune_together(mmc
, opcode
);
1954 if (host
->hs400_mode
) {
1955 sdr_clr_bits(host
->base
+ MSDC_IOCON
,
1956 MSDC_IOCON_DSPL
| MSDC_IOCON_W_DSPL
);
1957 msdc_set_data_delay(host
, 0);
1961 if (host
->hs400_mode
&&
1962 host
->dev_comp
->hs400_tune
)
1963 ret
= hs400_tune_response(mmc
, opcode
);
1965 ret
= msdc_tune_response(mmc
, opcode
);
1967 dev_err(host
->dev
, "Tune response fail!\n");
1970 if (host
->hs400_mode
== false) {
1971 ret
= msdc_tune_data(mmc
, opcode
);
1973 dev_err(host
->dev
, "Tune data fail!\n");
1977 host
->saved_tune_para
.iocon
= readl(host
->base
+ MSDC_IOCON
);
1978 host
->saved_tune_para
.pad_tune
= readl(host
->base
+ tune_reg
);
1979 host
->saved_tune_para
.pad_cmd_tune
= readl(host
->base
+ PAD_CMD_TUNE
);
1980 if (host
->top_base
) {
1981 host
->saved_tune_para
.emmc_top_control
= readl(host
->top_base
+
1983 host
->saved_tune_para
.emmc_top_cmd
= readl(host
->top_base
+
1989 static int msdc_prepare_hs400_tuning(struct mmc_host
*mmc
, struct mmc_ios
*ios
)
1991 struct msdc_host
*host
= mmc_priv(mmc
);
1992 host
->hs400_mode
= true;
1995 writel(host
->hs400_ds_delay
,
1996 host
->top_base
+ EMMC50_PAD_DS_TUNE
);
1998 writel(host
->hs400_ds_delay
, host
->base
+ PAD_DS_TUNE
);
1999 /* hs400 mode must set it to 0 */
2000 sdr_clr_bits(host
->base
+ MSDC_PATCH_BIT2
, MSDC_PATCH_BIT2_CFGCRCSTS
);
2001 /* to improve read performance, set outstanding to 2 */
2002 sdr_set_field(host
->base
+ EMMC50_CFG3
, EMMC50_CFG3_OUTS_WR
, 2);
2007 static void msdc_hw_reset(struct mmc_host
*mmc
)
2009 struct msdc_host
*host
= mmc_priv(mmc
);
2011 sdr_set_bits(host
->base
+ EMMC_IOCON
, 1);
2012 udelay(10); /* 10us is enough */
2013 sdr_clr_bits(host
->base
+ EMMC_IOCON
, 1);
2016 static const struct mmc_host_ops mt_msdc_ops
= {
2017 .post_req
= msdc_post_req
,
2018 .pre_req
= msdc_pre_req
,
2019 .request
= msdc_ops_request
,
2020 .set_ios
= msdc_ops_set_ios
,
2021 .get_ro
= mmc_gpio_get_ro
,
2022 .get_cd
= mmc_gpio_get_cd
,
2023 .start_signal_voltage_switch
= msdc_ops_switch_volt
,
2024 .card_busy
= msdc_card_busy
,
2025 .execute_tuning
= msdc_execute_tuning
,
2026 .prepare_hs400_tuning
= msdc_prepare_hs400_tuning
,
2027 .hw_reset
= msdc_hw_reset
,
2030 static void msdc_of_property_parse(struct platform_device
*pdev
,
2031 struct msdc_host
*host
)
2033 of_property_read_u32(pdev
->dev
.of_node
, "mediatek,latch-ck",
2036 of_property_read_u32(pdev
->dev
.of_node
, "hs400-ds-delay",
2037 &host
->hs400_ds_delay
);
2039 of_property_read_u32(pdev
->dev
.of_node
, "mediatek,hs200-cmd-int-delay",
2040 &host
->hs200_cmd_int_delay
);
2042 of_property_read_u32(pdev
->dev
.of_node
, "mediatek,hs400-cmd-int-delay",
2043 &host
->hs400_cmd_int_delay
);
2045 if (of_property_read_bool(pdev
->dev
.of_node
,
2046 "mediatek,hs400-cmd-resp-sel-rising"))
2047 host
->hs400_cmd_resp_sel_rising
= true;
2049 host
->hs400_cmd_resp_sel_rising
= false;
2052 static int msdc_drv_probe(struct platform_device
*pdev
)
2054 struct mmc_host
*mmc
;
2055 struct msdc_host
*host
;
2056 struct resource
*res
;
2059 if (!pdev
->dev
.of_node
) {
2060 dev_err(&pdev
->dev
, "No DT found\n");
2064 /* Allocate MMC host for this device */
2065 mmc
= mmc_alloc_host(sizeof(struct msdc_host
), &pdev
->dev
);
2069 host
= mmc_priv(mmc
);
2070 ret
= mmc_of_parse(mmc
);
2074 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
2075 host
->base
= devm_ioremap_resource(&pdev
->dev
, res
);
2076 if (IS_ERR(host
->base
)) {
2077 ret
= PTR_ERR(host
->base
);
2081 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 1);
2082 host
->top_base
= devm_ioremap_resource(&pdev
->dev
, res
);
2083 if (IS_ERR(host
->top_base
))
2084 host
->top_base
= NULL
;
2086 ret
= mmc_regulator_get_supply(mmc
);
2090 host
->src_clk
= devm_clk_get(&pdev
->dev
, "source");
2091 if (IS_ERR(host
->src_clk
)) {
2092 ret
= PTR_ERR(host
->src_clk
);
2096 host
->h_clk
= devm_clk_get(&pdev
->dev
, "hclk");
2097 if (IS_ERR(host
->h_clk
)) {
2098 ret
= PTR_ERR(host
->h_clk
);
2102 host
->bus_clk
= devm_clk_get(&pdev
->dev
, "bus_clk");
2103 if (IS_ERR(host
->bus_clk
))
2104 host
->bus_clk
= NULL
;
2105 /*source clock control gate is optional clock*/
2106 host
->src_clk_cg
= devm_clk_get(&pdev
->dev
, "source_cg");
2107 if (IS_ERR(host
->src_clk_cg
))
2108 host
->src_clk_cg
= NULL
;
2110 host
->irq
= platform_get_irq(pdev
, 0);
2111 if (host
->irq
< 0) {
2116 host
->pinctrl
= devm_pinctrl_get(&pdev
->dev
);
2117 if (IS_ERR(host
->pinctrl
)) {
2118 ret
= PTR_ERR(host
->pinctrl
);
2119 dev_err(&pdev
->dev
, "Cannot find pinctrl!\n");
2123 host
->pins_default
= pinctrl_lookup_state(host
->pinctrl
, "default");
2124 if (IS_ERR(host
->pins_default
)) {
2125 ret
= PTR_ERR(host
->pins_default
);
2126 dev_err(&pdev
->dev
, "Cannot find pinctrl default!\n");
2130 host
->pins_uhs
= pinctrl_lookup_state(host
->pinctrl
, "state_uhs");
2131 if (IS_ERR(host
->pins_uhs
)) {
2132 ret
= PTR_ERR(host
->pins_uhs
);
2133 dev_err(&pdev
->dev
, "Cannot find pinctrl uhs!\n");
2137 msdc_of_property_parse(pdev
, host
);
2139 host
->dev
= &pdev
->dev
;
2140 host
->dev_comp
= of_device_get_match_data(&pdev
->dev
);
2142 host
->src_clk_freq
= clk_get_rate(host
->src_clk
);
2143 /* Set host parameters to mmc */
2144 mmc
->ops
= &mt_msdc_ops
;
2145 if (host
->dev_comp
->clk_div_bits
== 8)
2146 mmc
->f_min
= DIV_ROUND_UP(host
->src_clk_freq
, 4 * 255);
2148 mmc
->f_min
= DIV_ROUND_UP(host
->src_clk_freq
, 4 * 4095);
2150 mmc
->caps
|= MMC_CAP_ERASE
| MMC_CAP_CMD23
;
2151 /* MMC core transfer sizes tunable parameters */
2152 mmc
->max_segs
= MAX_BD_NUM
;
2153 mmc
->max_seg_size
= BDMA_DESC_BUFLEN
;
2154 mmc
->max_blk_size
= 2048;
2155 mmc
->max_req_size
= 512 * 1024;
2156 mmc
->max_blk_count
= mmc
->max_req_size
/ 512;
2157 if (host
->dev_comp
->support_64g
)
2158 host
->dma_mask
= DMA_BIT_MASK(36);
2160 host
->dma_mask
= DMA_BIT_MASK(32);
2161 mmc_dev(mmc
)->dma_mask
= &host
->dma_mask
;
2163 host
->timeout_clks
= 3 * 1048576;
2164 host
->dma
.gpd
= dma_alloc_coherent(&pdev
->dev
,
2165 2 * sizeof(struct mt_gpdma_desc
),
2166 &host
->dma
.gpd_addr
, GFP_KERNEL
);
2167 host
->dma
.bd
= dma_alloc_coherent(&pdev
->dev
,
2168 MAX_BD_NUM
* sizeof(struct mt_bdma_desc
),
2169 &host
->dma
.bd_addr
, GFP_KERNEL
);
2170 if (!host
->dma
.gpd
|| !host
->dma
.bd
) {
2174 msdc_init_gpd_bd(host
, &host
->dma
);
2175 INIT_DELAYED_WORK(&host
->req_timeout
, msdc_request_timeout
);
2176 spin_lock_init(&host
->lock
);
2178 platform_set_drvdata(pdev
, mmc
);
2179 msdc_ungate_clock(host
);
2182 ret
= devm_request_irq(&pdev
->dev
, host
->irq
, msdc_irq
,
2183 IRQF_TRIGGER_LOW
| IRQF_ONESHOT
, pdev
->name
, host
);
2187 pm_runtime_set_active(host
->dev
);
2188 pm_runtime_set_autosuspend_delay(host
->dev
, MTK_MMC_AUTOSUSPEND_DELAY
);
2189 pm_runtime_use_autosuspend(host
->dev
);
2190 pm_runtime_enable(host
->dev
);
2191 ret
= mmc_add_host(mmc
);
2198 pm_runtime_disable(host
->dev
);
2200 platform_set_drvdata(pdev
, NULL
);
2201 msdc_deinit_hw(host
);
2202 msdc_gate_clock(host
);
2205 dma_free_coherent(&pdev
->dev
,
2206 2 * sizeof(struct mt_gpdma_desc
),
2207 host
->dma
.gpd
, host
->dma
.gpd_addr
);
2209 dma_free_coherent(&pdev
->dev
,
2210 MAX_BD_NUM
* sizeof(struct mt_bdma_desc
),
2211 host
->dma
.bd
, host
->dma
.bd_addr
);
2218 static int msdc_drv_remove(struct platform_device
*pdev
)
2220 struct mmc_host
*mmc
;
2221 struct msdc_host
*host
;
2223 mmc
= platform_get_drvdata(pdev
);
2224 host
= mmc_priv(mmc
);
2226 pm_runtime_get_sync(host
->dev
);
2228 platform_set_drvdata(pdev
, NULL
);
2229 mmc_remove_host(host
->mmc
);
2230 msdc_deinit_hw(host
);
2231 msdc_gate_clock(host
);
2233 pm_runtime_disable(host
->dev
);
2234 pm_runtime_put_noidle(host
->dev
);
2235 dma_free_coherent(&pdev
->dev
,
2236 2 * sizeof(struct mt_gpdma_desc
),
2237 host
->dma
.gpd
, host
->dma
.gpd_addr
);
2238 dma_free_coherent(&pdev
->dev
, MAX_BD_NUM
* sizeof(struct mt_bdma_desc
),
2239 host
->dma
.bd
, host
->dma
.bd_addr
);
2241 mmc_free_host(host
->mmc
);
2247 static void msdc_save_reg(struct msdc_host
*host
)
2249 u32 tune_reg
= host
->dev_comp
->pad_tune_reg
;
2251 host
->save_para
.msdc_cfg
= readl(host
->base
+ MSDC_CFG
);
2252 host
->save_para
.iocon
= readl(host
->base
+ MSDC_IOCON
);
2253 host
->save_para
.sdc_cfg
= readl(host
->base
+ SDC_CFG
);
2254 host
->save_para
.patch_bit0
= readl(host
->base
+ MSDC_PATCH_BIT
);
2255 host
->save_para
.patch_bit1
= readl(host
->base
+ MSDC_PATCH_BIT1
);
2256 host
->save_para
.patch_bit2
= readl(host
->base
+ MSDC_PATCH_BIT2
);
2257 host
->save_para
.pad_ds_tune
= readl(host
->base
+ PAD_DS_TUNE
);
2258 host
->save_para
.pad_cmd_tune
= readl(host
->base
+ PAD_CMD_TUNE
);
2259 host
->save_para
.emmc50_cfg0
= readl(host
->base
+ EMMC50_CFG0
);
2260 host
->save_para
.emmc50_cfg3
= readl(host
->base
+ EMMC50_CFG3
);
2261 host
->save_para
.sdc_fifo_cfg
= readl(host
->base
+ SDC_FIFO_CFG
);
2262 if (host
->top_base
) {
2263 host
->save_para
.emmc_top_control
=
2264 readl(host
->top_base
+ EMMC_TOP_CONTROL
);
2265 host
->save_para
.emmc_top_cmd
=
2266 readl(host
->top_base
+ EMMC_TOP_CMD
);
2267 host
->save_para
.emmc50_pad_ds_tune
=
2268 readl(host
->top_base
+ EMMC50_PAD_DS_TUNE
);
2270 host
->save_para
.pad_tune
= readl(host
->base
+ tune_reg
);
2274 static void msdc_restore_reg(struct msdc_host
*host
)
2276 u32 tune_reg
= host
->dev_comp
->pad_tune_reg
;
2278 writel(host
->save_para
.msdc_cfg
, host
->base
+ MSDC_CFG
);
2279 writel(host
->save_para
.iocon
, host
->base
+ MSDC_IOCON
);
2280 writel(host
->save_para
.sdc_cfg
, host
->base
+ SDC_CFG
);
2281 writel(host
->save_para
.patch_bit0
, host
->base
+ MSDC_PATCH_BIT
);
2282 writel(host
->save_para
.patch_bit1
, host
->base
+ MSDC_PATCH_BIT1
);
2283 writel(host
->save_para
.patch_bit2
, host
->base
+ MSDC_PATCH_BIT2
);
2284 writel(host
->save_para
.pad_ds_tune
, host
->base
+ PAD_DS_TUNE
);
2285 writel(host
->save_para
.pad_cmd_tune
, host
->base
+ PAD_CMD_TUNE
);
2286 writel(host
->save_para
.emmc50_cfg0
, host
->base
+ EMMC50_CFG0
);
2287 writel(host
->save_para
.emmc50_cfg3
, host
->base
+ EMMC50_CFG3
);
2288 writel(host
->save_para
.sdc_fifo_cfg
, host
->base
+ SDC_FIFO_CFG
);
2289 if (host
->top_base
) {
2290 writel(host
->save_para
.emmc_top_control
,
2291 host
->top_base
+ EMMC_TOP_CONTROL
);
2292 writel(host
->save_para
.emmc_top_cmd
,
2293 host
->top_base
+ EMMC_TOP_CMD
);
2294 writel(host
->save_para
.emmc50_pad_ds_tune
,
2295 host
->top_base
+ EMMC50_PAD_DS_TUNE
);
2297 writel(host
->save_para
.pad_tune
, host
->base
+ tune_reg
);
2301 static int msdc_runtime_suspend(struct device
*dev
)
2303 struct mmc_host
*mmc
= dev_get_drvdata(dev
);
2304 struct msdc_host
*host
= mmc_priv(mmc
);
2306 msdc_save_reg(host
);
2307 msdc_gate_clock(host
);
2311 static int msdc_runtime_resume(struct device
*dev
)
2313 struct mmc_host
*mmc
= dev_get_drvdata(dev
);
2314 struct msdc_host
*host
= mmc_priv(mmc
);
2316 msdc_ungate_clock(host
);
2317 msdc_restore_reg(host
);
2322 static const struct dev_pm_ops msdc_dev_pm_ops
= {
2323 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend
,
2324 pm_runtime_force_resume
)
2325 SET_RUNTIME_PM_OPS(msdc_runtime_suspend
, msdc_runtime_resume
, NULL
)
2328 static struct platform_driver mt_msdc_driver
= {
2329 .probe
= msdc_drv_probe
,
2330 .remove
= msdc_drv_remove
,
2333 .of_match_table
= msdc_of_ids
,
2334 .pm
= &msdc_dev_pm_ops
,
2338 module_platform_driver(mt_msdc_driver
);
2339 MODULE_LICENSE("GPL v2");
2340 MODULE_DESCRIPTION("MediaTek SD/MMC Card Driver");