drivers/platform/x86/intel_cht_int33fe.c

   1 /*
   2  * Intel Cherry Trail ACPI INT33FE pseudo device driver
   3  *
   4  * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  * Some Intel Cherry Trail based device which ship with Windows 10, have
  11  * this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2
  12  * resources, for 4 different chips attached to various i2c busses:
  13  * 1. The Whiskey Cove pmic, which is also described by the INT34D3 ACPI device
  14  * 2. Maxim MAX17047 Fuel Gauge Controller
  15  * 3. FUSB302 USB Type-C Controller
  16  * 4. PI3USB30532 USB switch
  17  *
  18  * So this driver is a stub / pseudo driver whose only purpose is to
  19  * instantiate i2c-clients for chips 2 - 4, so that standard i2c drivers
  20  * for these chips can bind to the them.
  21  */
  22
  23 #include <linux/acpi.h>
  24 #include <linux/i2c.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/module.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/regulator/consumer.h>
  29 #include <linux/slab.h>
  30
  31 #define EXPECTED_PTYPE          4
  32
  33 struct cht_int33fe_data {
  34         struct i2c_client *max17047;
  35         struct i2c_client *fusb302;
  36         struct i2c_client *pi3usb30532;
  37         /* Contain a list-head must be per device */
  38         struct device_connection connections[5];
  39 };
  40
  41 /*
  42  * Grrr I severly dislike buggy BIOS-es. At least one BIOS enumerates
  43  * the max17047 both through the INT33FE ACPI device (it is right there
  44  * in the resources table) as well as through a separate MAX17047 device.
  45  *
  46  * These helpers are used to work around this by checking if an i2c-client
  47  * for the max17047 has already been registered.
  48  */
  49 static int cht_int33fe_check_for_max17047(struct device *dev, void *data)
  50 {
  51         struct i2c_client **max17047 = data;
  52         struct acpi_device *adev;
  53         const char *hid;
  54
  55         adev = ACPI_COMPANION(dev);
  56         if (!adev)
  57                 return 0;
  58
  59         hid = acpi_device_hid(adev);
  60
  61         /* The MAX17047 ACPI node doesn't have an UID, so we don't check that */
  62         if (strcmp(hid, "MAX17047"))
  63                 return 0;
  64
  65         *max17047 = to_i2c_client(dev);
  66         return 1;
  67 }
  68
  69 static struct i2c_client *cht_int33fe_find_max17047(void)
  70 {
  71         struct i2c_client *max17047 = NULL;
  72
  73         i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
  74         return max17047;
  75 }
  76
  77 static const char * const max17047_suppliers[] = { "bq24190-charger" };
  78
  79 static const struct property_entry max17047_props[] = {
  80         PROPERTY_ENTRY_STRING_ARRAY("supplied-from", max17047_suppliers),
  81         { }
  82 };
  83
  84 static const struct property_entry fusb302_props[] = {
  85         PROPERTY_ENTRY_STRING("fcs,extcon-name", "cht_wcove_pwrsrc"),
  86         PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000),
  87         PROPERTY_ENTRY_U32("fcs,max-sink-microamp",   3000000),
  88         PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000),
  89         { }
  90 };
  91
  92 static int cht_int33fe_probe(struct platform_device *pdev)
  93 {
  94         struct device *dev = &pdev->dev;
  95         struct i2c_board_info board_info;
  96         struct cht_int33fe_data *data;
  97         struct i2c_client *max17047;
  98         struct regulator *regulator;
  99         unsigned long long ptyp;
 100         acpi_status status;
 101         int fusb302_irq;
 102         int ret;
 103
 104         status = acpi_evaluate_integer(ACPI_HANDLE(dev), "PTYP", NULL, &ptyp);
 105         if (ACPI_FAILURE(status)) {
 106                 dev_err(dev, "Error getting PTYPE\n");
 107                 return -ENODEV;
 108         }
 109
 110         /*
 111          * The same ACPI HID is used for different configurations check PTYP
 112          * to ensure that we are dealing with the expected config.
 113          */
 114         if (ptyp != EXPECTED_PTYPE)
 115                 return -ENODEV;
 116
 117         /* Check presence of INT34D3 (hardware-rev 3) expected for ptype == 4 */
 118         if (!acpi_dev_present("INT34D3", "1", 3)) {
 119                 dev_err(dev, "Error PTYPE == %d, but no INT34D3 device\n",
 120                         EXPECTED_PTYPE);
 121                 return -ENODEV;
 122         }
 123
 124         /*
 125          * We expect the WC PMIC to be paired with a TI bq24292i charger-IC.
 126          * We check for the bq24292i vbus regulator here, this has 2 purposes:
 127          * 1) The bq24292i allows charging with up to 12V, setting the fusb302's
 128          *    max-snk voltage to 12V with another charger-IC is not good.
 129          * 2) For the fusb302 driver to get the bq24292i vbus regulator, the
 130          *    regulator-map, which is part of the bq24292i regulator_init_data,
 131          *    must be registered before the fusb302 is instantiated, otherwise
 132          *    it will end up with a dummy-regulator.
 133          * Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data
 134          * which is defined in i2c-cht-wc.c from where the bq24292i i2c-client
 135          * gets instantiated. We use regulator_get_optional here so that we
 136          * don't end up getting a dummy-regulator ourselves.
 137          */
 138         regulator = regulator_get_optional(dev, "cht_wc_usb_typec_vbus");
 139         if (IS_ERR(regulator)) {
 140                 ret = PTR_ERR(regulator);
 141                 return (ret == -ENODEV) ? -EPROBE_DEFER : ret;
 142         }
 143         regulator_put(regulator);
 144
 145         /* The FUSB302 uses the irq at index 1 and is the only irq user */
 146         fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1);
 147         if (fusb302_irq < 0) {
 148                 if (fusb302_irq != -EPROBE_DEFER)
 149                         dev_err(dev, "Error getting FUSB302 irq\n");
 150                 return fusb302_irq;
 151         }
 152
 153         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 154         if (!data)
 155                 return -ENOMEM;
 156
 157         /* Work around BIOS bug, see comment on cht_int33fe_find_max17047 */
 158         max17047 = cht_int33fe_find_max17047();
 159         if (max17047) {
 160                 /* Pre-existing i2c-client for the max17047, add device-props */
 161                 ret = device_add_properties(&max17047->dev, max17047_props);
 162                 if (ret)
 163                         return ret;
 164                 /* And re-probe to get the new device-props applied. */
 165                 ret = device_reprobe(&max17047->dev);
 166                 if (ret)
 167                         dev_warn(dev, "Reprobing max17047 error: %d\n", ret);
 168         } else {
 169                 memset(&board_info, 0, sizeof(board_info));
 170                 strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
 171                 board_info.dev_name = "max17047";
 172                 board_info.properties = max17047_props;
 173                 data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
 174                 if (!data->max17047)
 175                         return -EPROBE_DEFER; /* Wait for i2c-adapter to load */
 176         }
 177
 178         data->connections[0].endpoint[0] = "port0";
 179         data->connections[0].endpoint[1] = "i2c-pi3usb30532";
 180         data->connections[0].id = "typec-switch";
 181         data->connections[1].endpoint[0] = "port0";
 182         data->connections[1].endpoint[1] = "i2c-pi3usb30532";
 183         data->connections[1].id = "typec-mux";
 184         data->connections[2].endpoint[0] = "port0";
 185         data->connections[2].endpoint[1] = "i2c-pi3usb30532";
 186         data->connections[2].id = "idff01m01";
 187         data->connections[3].endpoint[0] = "i2c-fusb302";
 188         data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
 189         data->connections[3].id = "usb-role-switch";
 190
 191         device_connections_add(data->connections);
 192
 193         memset(&board_info, 0, sizeof(board_info));
 194         strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
 195         board_info.dev_name = "fusb302";
 196         board_info.properties = fusb302_props;
 197         board_info.irq = fusb302_irq;
 198
 199         data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info);
 200         if (!data->fusb302)
 201                 goto out_unregister_max17047;
 202
 203         memset(&board_info, 0, sizeof(board_info));
 204         board_info.dev_name = "pi3usb30532";
 205         strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
 206
 207         data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
 208         if (!data->pi3usb30532)
 209                 goto out_unregister_fusb302;
 210
 211         platform_set_drvdata(pdev, data);
 212
 213         return 0;
 214
 215 out_unregister_fusb302:
 216         i2c_unregister_device(data->fusb302);
 217
 218 out_unregister_max17047:
 219         if (data->max17047)
 220                 i2c_unregister_device(data->max17047);
 221
 222         device_connections_remove(data->connections);
 223
 224         return -EPROBE_DEFER; /* Wait for the i2c-adapter to load */
 225 }
 226
 227 static int cht_int33fe_remove(struct platform_device *pdev)
 228 {
 229         struct cht_int33fe_data *data = platform_get_drvdata(pdev);
 230
 231         i2c_unregister_device(data->pi3usb30532);
 232         i2c_unregister_device(data->fusb302);
 233         if (data->max17047)
 234                 i2c_unregister_device(data->max17047);
 235
 236         device_connections_remove(data->connections);
 237
 238         return 0;
 239 }
 240
 241 static const struct acpi_device_id cht_int33fe_acpi_ids[] = {
 242         { "INT33FE", },
 243         { }
 244 };
 245 MODULE_DEVICE_TABLE(acpi, cht_int33fe_acpi_ids);
 246
 247 static struct platform_driver cht_int33fe_driver = {
 248         .driver = {
 249                 .name = "Intel Cherry Trail ACPI INT33FE driver",
 250                 .acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids),
 251         },
 252         .probe = cht_int33fe_probe,
 253         .remove = cht_int33fe_remove,
 254 };
 255
 256 module_platform_driver(cht_int33fe_driver);
 257
 258 MODULE_DESCRIPTION("Intel Cherry Trail ACPI INT33FE pseudo device driver");
 259 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
 260 MODULE_LICENSE("GPL");