2 * Amiga Buddha, Catweasel and X-Surf IDE Driver
4 * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
6 * This driver was written based on the specifications in README.buddha and
7 * the X-Surf info from Inside_XSurf.txt available at
8 * http://www.jschoenfeld.com
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive for
16 * - tune the timings using the speed-register
19 #include <linux/types.h>
21 #include <linux/interrupt.h>
22 #include <linux/blkdev.h>
23 #include <linux/zorro.h>
24 #include <linux/ide.h>
25 #include <linux/init.h>
26 #include <linux/module.h>
28 #include <asm/amigahw.h>
29 #include <asm/amigaints.h>
33 * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
36 #define BUDDHA_NUM_HWIFS 2
37 #define CATWEASEL_NUM_HWIFS 3
38 #define XSURF_NUM_HWIFS 2
40 #define MAX_NUM_HWIFS 3
43 * Bases of the IDE interfaces (relative to the board address)
46 #define BUDDHA_BASE1 0x800
47 #define BUDDHA_BASE2 0xa00
48 #define BUDDHA_BASE3 0xc00
50 #define XSURF_BASE1 0xb000 /* 2.5" Interface */
51 #define XSURF_BASE2 0xd000 /* 3.5" Interface */
53 static u_int buddha_bases
[CATWEASEL_NUM_HWIFS
] __initdata
= {
54 BUDDHA_BASE1
, BUDDHA_BASE2
, BUDDHA_BASE3
57 static u_int xsurf_bases
[XSURF_NUM_HWIFS
] __initdata
= {
58 XSURF_BASE1
, XSURF_BASE2
62 * Offsets from one of the above bases
65 #define BUDDHA_CONTROL 0x11a
71 #define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */
72 #define BUDDHA_IRQ2 0xf40 /* interrupt */
73 #define BUDDHA_IRQ3 0xf80
75 #define XSURF_IRQ1 0x7e
76 #define XSURF_IRQ2 0x7e
78 static int buddha_irqports
[CATWEASEL_NUM_HWIFS
] __initdata
= {
79 BUDDHA_IRQ1
, BUDDHA_IRQ2
, BUDDHA_IRQ3
82 static int xsurf_irqports
[XSURF_NUM_HWIFS
] __initdata
= {
83 XSURF_IRQ1
, XSURF_IRQ2
86 #define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
93 typedef enum BuddhaType_Enum
{
94 BOARD_BUDDHA
, BOARD_CATWEASEL
, BOARD_XSURF
97 static const char *buddha_board_name
[] = { "Buddha", "Catweasel", "X-Surf" };
100 * Check and acknowledge the interrupt status
103 static int buddha_test_irq(ide_hwif_t
*hwif
)
107 ch
= z_readb(hwif
->io_ports
.irq_addr
);
113 static void xsurf_clear_irq(ide_drive_t
*drive
)
116 * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
118 z_writeb(0, drive
->hwif
->io_ports
.irq_addr
);
121 static void __init
buddha_setup_ports(struct ide_hw
*hw
, unsigned long base
,
122 unsigned long ctl
, unsigned long irq_port
)
126 memset(hw
, 0, sizeof(*hw
));
128 hw
->io_ports
.data_addr
= base
;
130 for (i
= 1; i
< 8; i
++)
131 hw
->io_ports_array
[i
] = base
+ 2 + i
* 4;
133 hw
->io_ports
.ctl_addr
= ctl
;
134 hw
->io_ports
.irq_addr
= irq_port
;
136 hw
->irq
= IRQ_AMIGA_PORTS
;
139 static const struct ide_port_ops buddha_port_ops
= {
140 .test_irq
= buddha_test_irq
,
143 static const struct ide_port_ops xsurf_port_ops
= {
144 .clear_irq
= xsurf_clear_irq
,
145 .test_irq
= buddha_test_irq
,
148 static const struct ide_port_info buddha_port_info
= {
149 .port_ops
= &buddha_port_ops
,
150 .host_flags
= IDE_HFLAG_MMIO
| IDE_HFLAG_NO_DMA
,
151 .irq_flags
= IRQF_SHARED
,
152 .chipset
= ide_generic
,
156 * Probe for a Buddha or Catweasel IDE interface
159 static int __init
buddha_init(void)
161 struct zorro_dev
*z
= NULL
;
162 u_long buddha_board
= 0;
164 int buddha_num_hwifs
, i
;
166 while ((z
= zorro_find_device(ZORRO_WILDCARD
, z
))) {
168 struct ide_hw hw
[MAX_NUM_HWIFS
], *hws
[MAX_NUM_HWIFS
];
169 struct ide_port_info d
= buddha_port_info
;
171 if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA
) {
172 buddha_num_hwifs
= BUDDHA_NUM_HWIFS
;
174 } else if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL
) {
175 buddha_num_hwifs
= CATWEASEL_NUM_HWIFS
;
176 type
=BOARD_CATWEASEL
;
177 } else if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF
) {
178 buddha_num_hwifs
= XSURF_NUM_HWIFS
;
180 d
.port_ops
= &xsurf_port_ops
;
184 board
= z
->resource
.start
;
186 if(type
!= BOARD_XSURF
) {
187 if (!request_mem_region(board
+BUDDHA_BASE1
, 0x800, "IDE"))
190 if (!request_mem_region(board
+XSURF_BASE1
, 0x1000, "IDE"))
192 if (!request_mem_region(board
+XSURF_BASE2
, 0x1000, "IDE"))
194 if (!request_mem_region(board
+XSURF_IRQ1
, 0x8, "IDE")) {
195 release_mem_region(board
+XSURF_BASE2
, 0x1000);
197 release_mem_region(board
+XSURF_BASE1
, 0x1000);
201 buddha_board
= (unsigned long)ZTWO_VADDR(board
);
203 /* write to BUDDHA_IRQ_MR to enable the board IRQ */
204 /* X-Surf doesn't have this. IRQs are always on */
205 if (type
!= BOARD_XSURF
)
206 z_writeb(0, buddha_board
+BUDDHA_IRQ_MR
);
208 printk(KERN_INFO
"ide: %s IDE controller\n",
209 buddha_board_name
[type
]);
211 for (i
= 0; i
< buddha_num_hwifs
; i
++) {
212 unsigned long base
, ctl
, irq_port
;
214 if (type
!= BOARD_XSURF
) {
215 base
= buddha_board
+ buddha_bases
[i
];
216 ctl
= base
+ BUDDHA_CONTROL
;
217 irq_port
= buddha_board
+ buddha_irqports
[i
];
219 base
= buddha_board
+ xsurf_bases
[i
];
220 /* X-Surf has no CS1* (Control/AltStat) */
222 irq_port
= buddha_board
+ xsurf_irqports
[i
];
225 buddha_setup_ports(&hw
[i
], base
, ctl
, irq_port
);
230 ide_host_add(&d
, hws
, i
, NULL
);
236 module_init(buddha_init
);
238 MODULE_LICENSE("GPL");