?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
eventpoll.h: add missing epoll event masks
[linux/fpc-iii.git] / drivers / usb / phy / phy-twl6030-usb.c
blob12741856a75c3274133fbb46d0ff271c7dbf9d22
1 /*
2 * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
3 *
4 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * Author: Hema HK <hemahk@ti.com>
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 *
21 */
22
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/interrupt.h>
26 #include <linux/platform_device.h>
27 #include <linux/io.h>
28 #include <linux/usb/musb-omap.h>
29 #include <linux/usb/phy_companion.h>
30 #include <linux/phy/omap_usb.h>
31 #include <linux/i2c/twl.h>
32 #include <linux/regulator/consumer.h>
33 #include <linux/err.h>
34 #include <linux/slab.h>
35 #include <linux/delay.h>
36 #include <linux/of.h>
37
38 /* usb register definitions */
39 #define USB_VENDOR_ID_LSB 0x00
40 #define USB_VENDOR_ID_MSB 0x01
41 #define USB_PRODUCT_ID_LSB 0x02
42 #define USB_PRODUCT_ID_MSB 0x03
43 #define USB_VBUS_CTRL_SET 0x04
44 #define USB_VBUS_CTRL_CLR 0x05
45 #define USB_ID_CTRL_SET 0x06
46 #define USB_ID_CTRL_CLR 0x07
47 #define USB_VBUS_INT_SRC 0x08
48 #define USB_VBUS_INT_LATCH_SET 0x09
49 #define USB_VBUS_INT_LATCH_CLR 0x0A
50 #define USB_VBUS_INT_EN_LO_SET 0x0B
51 #define USB_VBUS_INT_EN_LO_CLR 0x0C
52 #define USB_VBUS_INT_EN_HI_SET 0x0D
53 #define USB_VBUS_INT_EN_HI_CLR 0x0E
54 #define USB_ID_INT_SRC 0x0F
55 #define USB_ID_INT_LATCH_SET 0x10
56 #define USB_ID_INT_LATCH_CLR 0x11
57
58 #define USB_ID_INT_EN_LO_SET 0x12
59 #define USB_ID_INT_EN_LO_CLR 0x13
60 #define USB_ID_INT_EN_HI_SET 0x14
61 #define USB_ID_INT_EN_HI_CLR 0x15
62 #define USB_OTG_ADP_CTRL 0x16
63 #define USB_OTG_ADP_HIGH 0x17
64 #define USB_OTG_ADP_LOW 0x18
65 #define USB_OTG_ADP_RISE 0x19
66 #define USB_OTG_REVISION 0x1A
67
68 /* to be moved to LDO */
69 #define TWL6030_MISC2 0xE5
70 #define TWL6030_CFG_LDO_PD2 0xF5
71 #define TWL6030_BACKUP_REG 0xFA
72
73 #define STS_HW_CONDITIONS 0x21
74
75 /* In module TWL6030_MODULE_PM_MASTER */
76 #define STS_HW_CONDITIONS 0x21
77 #define STS_USB_ID BIT(2)
78
79 /* In module TWL6030_MODULE_PM_RECEIVER */
80 #define VUSB_CFG_TRANS 0x71
81 #define VUSB_CFG_STATE 0x72
82 #define VUSB_CFG_VOLTAGE 0x73
83
84 /* in module TWL6030_MODULE_MAIN_CHARGE */
85
86 #define CHARGERUSB_CTRL1 0x8
87
88 #define CONTROLLER_STAT1 0x03
89 #define VBUS_DET BIT(2)
90
91 struct twl6030_usb {
92 struct phy_companion comparator;
93 struct device *dev;
94
95 /* for vbus reporting with irqs disabled */
96 spinlock_t lock;
97
98 struct regulator *usb3v3;
99
100 /* used to set vbus, in atomic path */
101 struct work_struct set_vbus_work;
102
103 int irq1;
104 int irq2;
105 enum omap_musb_vbus_id_status linkstat;
106 u8 asleep;
107 bool vbus_enable;
108 const char *regulator;
109 };
110
111 #define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
112
113 /*-------------------------------------------------------------------------*/
114
115 static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
116 u8 data, u8 address)
117 {
118 int ret = 0;
119
120 ret = twl_i2c_write_u8(module, data, address);
121 if (ret < 0)
122 dev_err(twl->dev,
123 "Write[0x%x] Error %d\n", address, ret);
124 return ret;
125 }
126
127 static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
128 {
129 u8 data;
130 int ret;
131
132 ret = twl_i2c_read_u8(module, &data, address);
133 if (ret >= 0)
134 ret = data;
135 else
136 dev_err(twl->dev,
137 "readb[0x%x,0x%x] Error %d\n",
138 module, address, ret);
139 return ret;
140 }
141
142 static int twl6030_start_srp(struct phy_companion *comparator)
143 {
144 struct twl6030_usb *twl = comparator_to_twl(comparator);
145
146 twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
147 twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
148
149 mdelay(100);
150 twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
151
152 return 0;
153 }
154
155 static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
156 {
157 /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
158 twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
159
160 /* Program CFG_LDO_PD2 register and set VUSB bit */
161 twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
162
163 /* Program MISC2 register and set bit VUSB_IN_VBAT */
164 twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
165
166 twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
167 if (IS_ERR(twl->usb3v3))
168 return -ENODEV;
169
170 /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
171 twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
172
173 /*
174 * Program the USB_ID_CTRL_SET register to enable GND drive
175 * and the ID comparators
176 */
177 twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
178
179 return 0;
180 }
181
182 static ssize_t twl6030_usb_vbus_show(struct device *dev,
183 struct device_attribute *attr, char *buf)
184 {
185 struct twl6030_usb *twl = dev_get_drvdata(dev);
186 unsigned long flags;
187 int ret = -EINVAL;
188
189 spin_lock_irqsave(&twl->lock, flags);
190
191 switch (twl->linkstat) {
192 case OMAP_MUSB_VBUS_VALID:
193 ret = snprintf(buf, PAGE_SIZE, "vbus\n");
194 break;
195 case OMAP_MUSB_ID_GROUND:
196 ret = snprintf(buf, PAGE_SIZE, "id\n");
197 break;
198 case OMAP_MUSB_VBUS_OFF:
199 ret = snprintf(buf, PAGE_SIZE, "none\n");
200 break;
201 default:
202 ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
203 }
204 spin_unlock_irqrestore(&twl->lock, flags);
205
206 return ret;
207 }
208 static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
209
210 static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
211 {
212 struct twl6030_usb *twl = _twl;
213 enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
214 u8 vbus_state, hw_state;
215 int ret;
216
217 hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
218
219 vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
220 CONTROLLER_STAT1);
221 if (!(hw_state & STS_USB_ID)) {
222 if (vbus_state & VBUS_DET) {
223 ret = regulator_enable(twl->usb3v3);
224 if (ret)
225 dev_err(twl->dev, "Failed to enable usb3v3\n");
226
227 twl->asleep = 1;
228 status = OMAP_MUSB_VBUS_VALID;
229 twl->linkstat = status;
230 omap_musb_mailbox(status);
231 } else {
232 if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
233 status = OMAP_MUSB_VBUS_OFF;
234 twl->linkstat = status;
235 omap_musb_mailbox(status);
236 if (twl->asleep) {
237 regulator_disable(twl->usb3v3);
238 twl->asleep = 0;
239 }
240 }
241 }
242 }
243 sysfs_notify(&twl->dev->kobj, NULL, "vbus");
244
245 return IRQ_HANDLED;
246 }
247
248 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
249 {
250 struct twl6030_usb *twl = _twl;
251 enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
252 u8 hw_state;
253 int ret;
254
255 hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
256
257 if (hw_state & STS_USB_ID) {
258 ret = regulator_enable(twl->usb3v3);
259 if (ret)
260 dev_err(twl->dev, "Failed to enable usb3v3\n");
261
262 twl->asleep = 1;
263 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
264 twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
265 status = OMAP_MUSB_ID_GROUND;
266 twl->linkstat = status;
267 omap_musb_mailbox(status);
268 } else {
269 twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
270 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
271 }
272 twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
273
274 return IRQ_HANDLED;
275 }
276
277 static int twl6030_enable_irq(struct twl6030_usb *twl)
278 {
279 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
280 twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
281 twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
282
283 twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
284 REG_INT_MSK_LINE_C);
285 twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
286 REG_INT_MSK_STS_C);
287 twl6030_usb_irq(twl->irq2, twl);
288 twl6030_usbotg_irq(twl->irq1, twl);
289
290 return 0;
291 }
292
293 static void otg_set_vbus_work(struct work_struct *data)
294 {
295 struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
296 set_vbus_work);
297
298 /*
299 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
300 * register. This enables boost mode.
301 */
302
303 if (twl->vbus_enable)
304 twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
305 CHARGERUSB_CTRL1);
306 else
307 twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
308 CHARGERUSB_CTRL1);
309 }
310
311 static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
312 {
313 struct twl6030_usb *twl = comparator_to_twl(comparator);
314
315 twl->vbus_enable = enabled;
316 schedule_work(&twl->set_vbus_work);
317
318 return 0;
319 }
320
321 static int twl6030_usb_probe(struct platform_device *pdev)
322 {
323 u32 ret;
324 struct twl6030_usb *twl;
325 int status, err;
326 struct device_node *np = pdev->dev.of_node;
327 struct device *dev = &pdev->dev;
328 struct twl4030_usb_data *pdata = dev_get_platdata(dev);
329
330 twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
331 if (!twl)
332 return -ENOMEM;
333
334 twl->dev = &pdev->dev;
335 twl->irq1 = platform_get_irq(pdev, 0);
336 twl->irq2 = platform_get_irq(pdev, 1);
337 twl->linkstat = OMAP_MUSB_UNKNOWN;
338
339 twl->comparator.set_vbus = twl6030_set_vbus;
340 twl->comparator.start_srp = twl6030_start_srp;
341
342 ret = omap_usb2_set_comparator(&twl->comparator);
343 if (ret == -ENODEV) {
344 dev_info(&pdev->dev, "phy not ready, deferring probe");
345 return -EPROBE_DEFER;
346 }
347
348 if (np) {
349 twl->regulator = "usb";
350 } else if (pdata) {
351 if (pdata->features & TWL6032_SUBCLASS)
352 twl->regulator = "ldousb";
353 else
354 twl->regulator = "vusb";
355 } else {
356 dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
357 return -EINVAL;
358 }
359
360 /* init spinlock for workqueue */
361 spin_lock_init(&twl->lock);
362
363 err = twl6030_usb_ldo_init(twl);
364 if (err) {
365 dev_err(&pdev->dev, "ldo init failed\n");
366 return err;
367 }
368
369 platform_set_drvdata(pdev, twl);
370 if (device_create_file(&pdev->dev, &dev_attr_vbus))
371 dev_warn(&pdev->dev, "could not create sysfs file\n");
372
373 INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
374
375 status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
376 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
377 "twl6030_usb", twl);
378 if (status < 0) {
379 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
380 twl->irq1, status);
381 device_remove_file(twl->dev, &dev_attr_vbus);
382 return status;
383 }
384
385 status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
386 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
387 "twl6030_usb", twl);
388 if (status < 0) {
389 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
390 twl->irq2, status);
391 free_irq(twl->irq1, twl);
392 device_remove_file(twl->dev, &dev_attr_vbus);
393 return status;
394 }
395
396 twl->asleep = 0;
397 twl6030_enable_irq(twl);
398 dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
399
400 return 0;
401 }
402
403 static int twl6030_usb_remove(struct platform_device *pdev)
404 {
405 struct twl6030_usb *twl = platform_get_drvdata(pdev);
406
407 twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
408 REG_INT_MSK_LINE_C);
409 twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
410 REG_INT_MSK_STS_C);
411 free_irq(twl->irq1, twl);
412 free_irq(twl->irq2, twl);
413 regulator_put(twl->usb3v3);
414 device_remove_file(twl->dev, &dev_attr_vbus);
415 cancel_work_sync(&twl->set_vbus_work);
416
417 return 0;
418 }
419
420 #ifdef CONFIG_OF
421 static const struct of_device_id twl6030_usb_id_table[] = {
422 { .compatible = "ti,twl6030-usb" },
423 {}
424 };
425 MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
426 #endif
427
428 static struct platform_driver twl6030_usb_driver = {
429 .probe = twl6030_usb_probe,
430 .remove = twl6030_usb_remove,
431 .driver = {
432 .name = "twl6030_usb",
433 .of_match_table = of_match_ptr(twl6030_usb_id_table),
434 },
435 };
436
437 static int __init twl6030_usb_init(void)
438 {
439 return platform_driver_register(&twl6030_usb_driver);
440 }
441 subsys_initcall(twl6030_usb_init);
442
443 static void __exit twl6030_usb_exit(void)
444 {
445 platform_driver_unregister(&twl6030_usb_driver);
446 }
447 module_exit(twl6030_usb_exit);
448
449 MODULE_ALIAS("platform:twl6030_usb");
450 MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
451 MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
452 MODULE_LICENSE("GPL");
Linux with added FPC-III support