net_sched: reorder pernet ops and act ops registrations

[linux/fpc-iii.git] / drivers / regulator / core.c

/*
 * core.c  --  Voltage/Current Regulator framework.
 *
 * Copyright 2007, 2008 Wolfson Microelectronics PLC.
 * Copyright 2008 SlimLogic Ltd.
 *
 * Author: Liam Girdwood <lrg@slimlogic.co.uk>
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/async.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/module.h>

#define CREATE_TRACE_POINTS
#include <trace/events/regulator.h>

#include "dummy.h"
#include "internal.h"

#define rdev_crit(rdev, fmt, ...)                                       \
        pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
#define rdev_err(rdev, fmt, ...)                                        \
        pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
#define rdev_warn(rdev, fmt, ...)                                       \
        pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
#define rdev_info(rdev, fmt, ...)                                       \
        pr_info("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
#define rdev_dbg(rdev, fmt, ...)                                        \
        pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)

static DEFINE_MUTEX(regulator_list_mutex);
static LIST_HEAD(regulator_map_list);
static LIST_HEAD(regulator_ena_gpio_list);
static LIST_HEAD(regulator_supply_alias_list);
static bool has_full_constraints;

static struct dentry *debugfs_root;

static struct class regulator_class;

/*
 * struct regulator_map
 *
 * Used to provide symbolic supply names to devices.
 */
struct regulator_map {
        struct list_head list;
        const char *dev_name;   /* The dev_name() for the consumer */
        const char *supply;
        struct regulator_dev *regulator;
};

/*
 * struct regulator_enable_gpio
 *
 * Management for shared enable GPIO pin
 */
struct regulator_enable_gpio {
        struct list_head list;
        struct gpio_desc *gpiod;
        u32 enable_count;       /* a number of enabled shared GPIO */
        u32 request_count;      /* a number of requested shared GPIO */
        unsigned int ena_gpio_invert:1;
};

/*
 * struct regulator_supply_alias
 *
 * Used to map lookups for a supply onto an alternative device.
 */
struct regulator_supply_alias {
        struct list_head list;
        struct device *src_dev;
        const char *src_supply;
        struct device *alias_dev;
        const char *alias_supply;
};

static int _regulator_is_enabled(struct regulator_dev *rdev);
static int _regulator_disable(struct regulator_dev *rdev);
static int _regulator_get_voltage(struct regulator_dev *rdev);
static int _regulator_get_current_limit(struct regulator_dev *rdev);
static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
static int _notifier_call_chain(struct regulator_dev *rdev,
                                  unsigned long event, void *data);
static int _regulator_do_set_voltage(struct regulator_dev *rdev,
                                     int min_uV, int max_uV);
static struct regulator *create_regulator(struct regulator_dev *rdev,
                                          struct device *dev,
                                          const char *supply_name);
static void _regulator_put(struct regulator *regulator);

static struct regulator_dev *dev_to_rdev(struct device *dev)
{
        return container_of(dev, struct regulator_dev, dev);
}

static const char *rdev_get_name(struct regulator_dev *rdev)
{
        if (rdev->constraints && rdev->constraints->name)
                return rdev->constraints->name;
        else if (rdev->desc->name)
                return rdev->desc->name;
        else
                return "";
}

static bool have_full_constraints(void)
{
        return has_full_constraints || of_have_populated_dt();
}

static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops)
{
        if (!rdev->constraints) {
                rdev_err(rdev, "no constraints\n");
                return false;
        }

        if (rdev->constraints->valid_ops_mask & ops)
                return true;

        return false;
}

static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev)
{
        if (rdev && rdev->supply)
                return rdev->supply->rdev;

        return NULL;
}

/**
 * regulator_lock_supply - lock a regulator and its supplies
 * @rdev:         regulator source
 */
static void regulator_lock_supply(struct regulator_dev *rdev)
{
        int i;

        for (i = 0; rdev; rdev = rdev_get_supply(rdev), i++)
                mutex_lock_nested(&rdev->mutex, i);
}

/**
 * regulator_unlock_supply - unlock a regulator and its supplies
 * @rdev:         regulator source
 */
static void regulator_unlock_supply(struct regulator_dev *rdev)
{
        struct regulator *supply;

        while (1) {
                mutex_unlock(&rdev->mutex);
                supply = rdev->supply;

                if (!rdev->supply)
                        return;

                rdev = supply->rdev;
        }
}

/**
 * of_get_regulator - get a regulator device node based on supply name
 * @dev: Device pointer for the consumer (of regulator) device
 * @supply: regulator supply name
 *
 * Extract the regulator device node corresponding to the supply name.
 * returns the device node corresponding to the regulator if found, else
 * returns NULL.
 */
static struct device_node *of_get_regulator(struct device *dev, const char *supply)
{
        struct device_node *regnode = NULL;
        char prop_name[32]; /* 32 is max size of property name */

        dev_dbg(dev, "Looking up %s-supply from device tree\n", supply);

        snprintf(prop_name, 32, "%s-supply", supply);
        regnode = of_parse_phandle(dev->of_node, prop_name, 0);

        if (!regnode) {
                dev_dbg(dev, "Looking up %s property in node %s failed",
                                prop_name, dev->of_node->full_name);
                return NULL;
        }
        return regnode;
}

/* Platform voltage constraint check */
static int regulator_check_voltage(struct regulator_dev *rdev,
                                   int *min_uV, int *max_uV)
{
        BUG_ON(*min_uV > *max_uV);

        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
                rdev_err(rdev, "voltage operation not allowed\n");
                return -EPERM;
        }

        if (*max_uV > rdev->constraints->max_uV)
                *max_uV = rdev->constraints->max_uV;
        if (*min_uV < rdev->constraints->min_uV)
                *min_uV = rdev->constraints->min_uV;

        if (*min_uV > *max_uV) {
                rdev_err(rdev, "unsupportable voltage range: %d-%duV\n",
                         *min_uV, *max_uV);
                return -EINVAL;
        }

        return 0;
}

/* Make sure we select a voltage that suits the needs of all
 * regulator consumers
 */
static int regulator_check_consumers(struct regulator_dev *rdev,
                                     int *min_uV, int *max_uV)
{
        struct regulator *regulator;

        list_for_each_entry(regulator, &rdev->consumer_list, list) {
                /*
                 * Assume consumers that didn't say anything are OK
                 * with anything in the constraint range.
                 */
                if (!regulator->min_uV && !regulator->max_uV)
                        continue;

                if (*max_uV > regulator->max_uV)
                        *max_uV = regulator->max_uV;
                if (*min_uV < regulator->min_uV)
                        *min_uV = regulator->min_uV;
        }

        if (*min_uV > *max_uV) {
                rdev_err(rdev, "Restricting voltage, %u-%uuV\n",
                        *min_uV, *max_uV);
                return -EINVAL;
        }

        return 0;
}

/* current constraint check */
static int regulator_check_current_limit(struct regulator_dev *rdev,
                                        int *min_uA, int *max_uA)
{
        BUG_ON(*min_uA > *max_uA);

        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_CURRENT)) {
                rdev_err(rdev, "current operation not allowed\n");
                return -EPERM;
        }

        if (*max_uA > rdev->constraints->max_uA)
                *max_uA = rdev->constraints->max_uA;
        if (*min_uA < rdev->constraints->min_uA)
                *min_uA = rdev->constraints->min_uA;

        if (*min_uA > *max_uA) {
                rdev_err(rdev, "unsupportable current range: %d-%duA\n",
                         *min_uA, *max_uA);
                return -EINVAL;
        }

        return 0;
}

/* operating mode constraint check */
static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
{
        switch (*mode) {
        case REGULATOR_MODE_FAST:
        case REGULATOR_MODE_NORMAL:
        case REGULATOR_MODE_IDLE:
        case REGULATOR_MODE_STANDBY:
                break;
        default:
                rdev_err(rdev, "invalid mode %x specified\n", *mode);
                return -EINVAL;
        }

        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_MODE)) {
                rdev_err(rdev, "mode operation not allowed\n");
                return -EPERM;
        }

        /* The modes are bitmasks, the most power hungry modes having
         * the lowest values. If the requested mode isn't supported
         * try higher modes. */
        while (*mode) {
                if (rdev->constraints->valid_modes_mask & *mode)
                        return 0;
                *mode /= 2;
        }

        return -EINVAL;
}

static ssize_t regulator_uV_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);
        ssize_t ret;

        mutex_lock(&rdev->mutex);
        ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
        mutex_unlock(&rdev->mutex);

        return ret;
}
static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);

static ssize_t regulator_uA_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
}
static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL);

static ssize_t name_show(struct device *dev, struct device_attribute *attr,
                         char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return sprintf(buf, "%s\n", rdev_get_name(rdev));
}
static DEVICE_ATTR_RO(name);

static ssize_t regulator_print_opmode(char *buf, int mode)
{
        switch (mode) {
        case REGULATOR_MODE_FAST:
                return sprintf(buf, "fast\n");
        case REGULATOR_MODE_NORMAL:
                return sprintf(buf, "normal\n");
        case REGULATOR_MODE_IDLE:
                return sprintf(buf, "idle\n");
        case REGULATOR_MODE_STANDBY:
                return sprintf(buf, "standby\n");
        }
        return sprintf(buf, "unknown\n");
}

static ssize_t regulator_opmode_show(struct device *dev,
                                    struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return regulator_print_opmode(buf, _regulator_get_mode(rdev));
}
static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL);

static ssize_t regulator_print_state(char *buf, int state)
{
        if (state > 0)
                return sprintf(buf, "enabled\n");
        else if (state == 0)
                return sprintf(buf, "disabled\n");
        else
                return sprintf(buf, "unknown\n");
}

static ssize_t regulator_state_show(struct device *dev,
                                   struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);
        ssize_t ret;

        mutex_lock(&rdev->mutex);
        ret = regulator_print_state(buf, _regulator_is_enabled(rdev));
        mutex_unlock(&rdev->mutex);

        return ret;
}
static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);

static ssize_t regulator_status_show(struct device *dev,
                                   struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);
        int status;
        char *label;

        status = rdev->desc->ops->get_status(rdev);
        if (status < 0)
                return status;

        switch (status) {
        case REGULATOR_STATUS_OFF:
                label = "off";
                break;
        case REGULATOR_STATUS_ON:
                label = "on";
                break;
        case REGULATOR_STATUS_ERROR:
                label = "error";
                break;
        case REGULATOR_STATUS_FAST:
                label = "fast";
                break;
        case REGULATOR_STATUS_NORMAL:
                label = "normal";
                break;
        case REGULATOR_STATUS_IDLE:
                label = "idle";
                break;
        case REGULATOR_STATUS_STANDBY:
                label = "standby";
                break;
        case REGULATOR_STATUS_BYPASS:
                label = "bypass";
                break;
        case REGULATOR_STATUS_UNDEFINED:
                label = "undefined";
                break;
        default:
                return -ERANGE;
        }

        return sprintf(buf, "%s\n", label);
}
static DEVICE_ATTR(status, 0444, regulator_status_show, NULL);

static ssize_t regulator_min_uA_show(struct device *dev,
                                    struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        if (!rdev->constraints)
                return sprintf(buf, "constraint not defined\n");

        return sprintf(buf, "%d\n", rdev->constraints->min_uA);
}
static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL);

static ssize_t regulator_max_uA_show(struct device *dev,
                                    struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        if (!rdev->constraints)
                return sprintf(buf, "constraint not defined\n");

        return sprintf(buf, "%d\n", rdev->constraints->max_uA);
}
static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL);

static ssize_t regulator_min_uV_show(struct device *dev,
                                    struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        if (!rdev->constraints)
                return sprintf(buf, "constraint not defined\n");

        return sprintf(buf, "%d\n", rdev->constraints->min_uV);
}
static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL);

static ssize_t regulator_max_uV_show(struct device *dev,
                                    struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        if (!rdev->constraints)
                return sprintf(buf, "constraint not defined\n");

        return sprintf(buf, "%d\n", rdev->constraints->max_uV);
}
static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL);

static ssize_t regulator_total_uA_show(struct device *dev,
                                      struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);
        struct regulator *regulator;
        int uA = 0;

        mutex_lock(&rdev->mutex);
        list_for_each_entry(regulator, &rdev->consumer_list, list)
                uA += regulator->uA_load;
        mutex_unlock(&rdev->mutex);
        return sprintf(buf, "%d\n", uA);
}
static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL);

static ssize_t num_users_show(struct device *dev, struct device_attribute *attr,
                              char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);
        return sprintf(buf, "%d\n", rdev->use_count);
}
static DEVICE_ATTR_RO(num_users);

static ssize_t type_show(struct device *dev, struct device_attribute *attr,
                         char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        switch (rdev->desc->type) {
        case REGULATOR_VOLTAGE:
                return sprintf(buf, "voltage\n");
        case REGULATOR_CURRENT:
                return sprintf(buf, "current\n");
        }
        return sprintf(buf, "unknown\n");
}
static DEVICE_ATTR_RO(type);

static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
}
static DEVICE_ATTR(suspend_mem_microvolts, 0444,
                regulator_suspend_mem_uV_show, NULL);

static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
}
static DEVICE_ATTR(suspend_disk_microvolts, 0444,
                regulator_suspend_disk_uV_show, NULL);

static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
}
static DEVICE_ATTR(suspend_standby_microvolts, 0444,
                regulator_suspend_standby_uV_show, NULL);

static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return regulator_print_opmode(buf,
                rdev->constraints->state_mem.mode);
}
static DEVICE_ATTR(suspend_mem_mode, 0444,
                regulator_suspend_mem_mode_show, NULL);

static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return regulator_print_opmode(buf,
                rdev->constraints->state_disk.mode);
}
static DEVICE_ATTR(suspend_disk_mode, 0444,
                regulator_suspend_disk_mode_show, NULL);

static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return regulator_print_opmode(buf,
                rdev->constraints->state_standby.mode);
}
static DEVICE_ATTR(suspend_standby_mode, 0444,
                regulator_suspend_standby_mode_show, NULL);

static ssize_t regulator_suspend_mem_state_show(struct device *dev,
                                   struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return regulator_print_state(buf,
                        rdev->constraints->state_mem.enabled);
}
static DEVICE_ATTR(suspend_mem_state, 0444,
                regulator_suspend_mem_state_show, NULL);

static ssize_t regulator_suspend_disk_state_show(struct device *dev,
                                   struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return regulator_print_state(buf,
                        rdev->constraints->state_disk.enabled);
}
static DEVICE_ATTR(suspend_disk_state, 0444,
                regulator_suspend_disk_state_show, NULL);

static ssize_t regulator_suspend_standby_state_show(struct device *dev,
                                   struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        return regulator_print_state(buf,
                        rdev->constraints->state_standby.enabled);
}
static DEVICE_ATTR(suspend_standby_state, 0444,
                regulator_suspend_standby_state_show, NULL);

static ssize_t regulator_bypass_show(struct device *dev,
                                     struct device_attribute *attr, char *buf)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);
        const char *report;
        bool bypass;
        int ret;

        ret = rdev->desc->ops->get_bypass(rdev, &bypass);

        if (ret != 0)
                report = "unknown";
        else if (bypass)
                report = "enabled";
        else
                report = "disabled";

        return sprintf(buf, "%s\n", report);
}
static DEVICE_ATTR(bypass, 0444,
                   regulator_bypass_show, NULL);

/* Calculate the new optimum regulator operating mode based on the new total
 * consumer load. All locks held by caller */
static int drms_uA_update(struct regulator_dev *rdev)
{
        struct regulator *sibling;
        int current_uA = 0, output_uV, input_uV, err;
        unsigned int mode;

        lockdep_assert_held_once(&rdev->mutex);

        /*
         * first check to see if we can set modes at all, otherwise just
         * tell the consumer everything is OK.
         */
        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
                return 0;

        if (!rdev->desc->ops->get_optimum_mode &&
            !rdev->desc->ops->set_load)
                return 0;

        if (!rdev->desc->ops->set_mode &&
            !rdev->desc->ops->set_load)
                return -EINVAL;

        /* get output voltage */
        output_uV = _regulator_get_voltage(rdev);
        if (output_uV <= 0) {
                rdev_err(rdev, "invalid output voltage found\n");
                return -EINVAL;
        }

        /* get input voltage */
        input_uV = 0;
        if (rdev->supply)
                input_uV = regulator_get_voltage(rdev->supply);
        if (input_uV <= 0)
                input_uV = rdev->constraints->input_uV;
        if (input_uV <= 0) {
                rdev_err(rdev, "invalid input voltage found\n");
                return -EINVAL;
        }

        /* calc total requested load */
        list_for_each_entry(sibling, &rdev->consumer_list, list)
                current_uA += sibling->uA_load;

        current_uA += rdev->constraints->system_load;

        if (rdev->desc->ops->set_load) {
                /* set the optimum mode for our new total regulator load */
                err = rdev->desc->ops->set_load(rdev, current_uA);
                if (err < 0)
                        rdev_err(rdev, "failed to set load %d\n", current_uA);
        } else {
                /* now get the optimum mode for our new total regulator load */
                mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
                                                         output_uV, current_uA);

                /* check the new mode is allowed */
                err = regulator_mode_constrain(rdev, &mode);
                if (err < 0) {
                        rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n",
                                 current_uA, input_uV, output_uV);
                        return err;
                }

                err = rdev->desc->ops->set_mode(rdev, mode);
                if (err < 0)
                        rdev_err(rdev, "failed to set optimum mode %x\n", mode);
        }

        return err;
}

static int suspend_set_state(struct regulator_dev *rdev,
        struct regulator_state *rstate)
{
        int ret = 0;

        /* If we have no suspend mode configration don't set anything;
         * only warn if the driver implements set_suspend_voltage or
         * set_suspend_mode callback.
         */
        if (!rstate->enabled && !rstate->disabled) {
                if (rdev->desc->ops->set_suspend_voltage ||
                    rdev->desc->ops->set_suspend_mode)
                        rdev_warn(rdev, "No configuration\n");
                return 0;
        }

        if (rstate->enabled && rstate->disabled) {
                rdev_err(rdev, "invalid configuration\n");
                return -EINVAL;
        }

        if (rstate->enabled && rdev->desc->ops->set_suspend_enable)
                ret = rdev->desc->ops->set_suspend_enable(rdev);
        else if (rstate->disabled && rdev->desc->ops->set_suspend_disable)
                ret = rdev->desc->ops->set_suspend_disable(rdev);
        else /* OK if set_suspend_enable or set_suspend_disable is NULL */
                ret = 0;

        if (ret < 0) {
                rdev_err(rdev, "failed to enabled/disable\n");
                return ret;
        }

        if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
                ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set voltage\n");
                        return ret;
                }
        }

        if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
                ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set mode\n");
                        return ret;
                }
        }
        return ret;
}

/* locks held by caller */
static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
{
        if (!rdev->constraints)
                return -EINVAL;

        switch (state) {
        case PM_SUSPEND_STANDBY:
                return suspend_set_state(rdev,
                        &rdev->constraints->state_standby);
        case PM_SUSPEND_MEM:
                return suspend_set_state(rdev,
                        &rdev->constraints->state_mem);
        case PM_SUSPEND_MAX:
                return suspend_set_state(rdev,
                        &rdev->constraints->state_disk);
        default:
                return -EINVAL;
        }
}

static void print_constraints(struct regulator_dev *rdev)
{
        struct regulation_constraints *constraints = rdev->constraints;
        char buf[160] = "";
        size_t len = sizeof(buf) - 1;
        int count = 0;
        int ret;

        if (constraints->min_uV && constraints->max_uV) {
                if (constraints->min_uV == constraints->max_uV)
                        count += scnprintf(buf + count, len - count, "%d mV ",
                                           constraints->min_uV / 1000);
                else
                        count += scnprintf(buf + count, len - count,
                                           "%d <--> %d mV ",
                                           constraints->min_uV / 1000,
                                           constraints->max_uV / 1000);
        }

        if (!constraints->min_uV ||
            constraints->min_uV != constraints->max_uV) {
                ret = _regulator_get_voltage(rdev);
                if (ret > 0)
                        count += scnprintf(buf + count, len - count,
                                           "at %d mV ", ret / 1000);
        }

        if (constraints->uV_offset)
                count += scnprintf(buf + count, len - count, "%dmV offset ",
                                   constraints->uV_offset / 1000);

        if (constraints->min_uA && constraints->max_uA) {
                if (constraints->min_uA == constraints->max_uA)
                        count += scnprintf(buf + count, len - count, "%d mA ",
                                           constraints->min_uA / 1000);
                else
                        count += scnprintf(buf + count, len - count,
                                           "%d <--> %d mA ",
                                           constraints->min_uA / 1000,
                                           constraints->max_uA / 1000);
        }

        if (!constraints->min_uA ||
            constraints->min_uA != constraints->max_uA) {
                ret = _regulator_get_current_limit(rdev);
                if (ret > 0)
                        count += scnprintf(buf + count, len - count,
                                           "at %d mA ", ret / 1000);
        }

        if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
                count += scnprintf(buf + count, len - count, "fast ");
        if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
                count += scnprintf(buf + count, len - count, "normal ");
        if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
                count += scnprintf(buf + count, len - count, "idle ");
        if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
                count += scnprintf(buf + count, len - count, "standby");

        if (!count)
                scnprintf(buf, len, "no parameters");

        rdev_dbg(rdev, "%s\n", buf);

        if ((constraints->min_uV != constraints->max_uV) &&
            !regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE))
                rdev_warn(rdev,
                          "Voltage range but no REGULATOR_CHANGE_VOLTAGE\n");
}

static int machine_constraints_voltage(struct regulator_dev *rdev,
        struct regulation_constraints *constraints)
{
        const struct regulator_ops *ops = rdev->desc->ops;
        int ret;

        /* do we need to apply the constraint voltage */
        if (rdev->constraints->apply_uV &&
            rdev->constraints->min_uV && rdev->constraints->max_uV) {
                int target_min, target_max;
                int current_uV = _regulator_get_voltage(rdev);
                if (current_uV < 0) {
                        rdev_err(rdev,
                                 "failed to get the current voltage(%d)\n",
                                 current_uV);
                        return current_uV;
                }

                /*
                 * If we're below the minimum voltage move up to the
                 * minimum voltage, if we're above the maximum voltage
                 * then move down to the maximum.
                 */
                target_min = current_uV;
                target_max = current_uV;

                if (current_uV < rdev->constraints->min_uV) {
                        target_min = rdev->constraints->min_uV;
                        target_max = rdev->constraints->min_uV;
                }

                if (current_uV > rdev->constraints->max_uV) {
                        target_min = rdev->constraints->max_uV;
                        target_max = rdev->constraints->max_uV;
                }

                if (target_min != current_uV || target_max != current_uV) {
                        rdev_info(rdev, "Bringing %duV into %d-%duV\n",
                                  current_uV, target_min, target_max);
                        ret = _regulator_do_set_voltage(
                                rdev, target_min, target_max);
                        if (ret < 0) {
                                rdev_err(rdev,
                                        "failed to apply %d-%duV constraint(%d)\n",
                                        target_min, target_max, ret);
                                return ret;
                        }
                }
        }

        /* constrain machine-level voltage specs to fit
         * the actual range supported by this regulator.
         */
        if (ops->list_voltage && rdev->desc->n_voltages) {
                int     count = rdev->desc->n_voltages;
                int     i;
                int     min_uV = INT_MAX;
                int     max_uV = INT_MIN;
                int     cmin = constraints->min_uV;
                int     cmax = constraints->max_uV;

                /* it's safe to autoconfigure fixed-voltage supplies
                   and the constraints are used by list_voltage. */
                if (count == 1 && !cmin) {
                        cmin = 1;
                        cmax = INT_MAX;
                        constraints->min_uV = cmin;
                        constraints->max_uV = cmax;
                }

                /* voltage constraints are optional */
                if ((cmin == 0) && (cmax == 0))
                        return 0;

                /* else require explicit machine-level constraints */
                if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
                        rdev_err(rdev, "invalid voltage constraints\n");
                        return -EINVAL;
                }

                /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
                for (i = 0; i < count; i++) {
                        int     value;

                        value = ops->list_voltage(rdev, i);
                        if (value <= 0)
                                continue;

                        /* maybe adjust [min_uV..max_uV] */
                        if (value >= cmin && value < min_uV)
                                min_uV = value;
                        if (value <= cmax && value > max_uV)
                                max_uV = value;
                }

                /* final: [min_uV..max_uV] valid iff constraints valid */
                if (max_uV < min_uV) {
                        rdev_err(rdev,
                                 "unsupportable voltage constraints %u-%uuV\n",
                                 min_uV, max_uV);
                        return -EINVAL;
                }

                /* use regulator's subset of machine constraints */
                if (constraints->min_uV < min_uV) {
                        rdev_dbg(rdev, "override min_uV, %d -> %d\n",
                                 constraints->min_uV, min_uV);
                        constraints->min_uV = min_uV;
                }
                if (constraints->max_uV > max_uV) {
                        rdev_dbg(rdev, "override max_uV, %d -> %d\n",
                                 constraints->max_uV, max_uV);
                        constraints->max_uV = max_uV;
                }
        }

        return 0;
}

static int machine_constraints_current(struct regulator_dev *rdev,
        struct regulation_constraints *constraints)
{
        const struct regulator_ops *ops = rdev->desc->ops;
        int ret;

        if (!constraints->min_uA && !constraints->max_uA)
                return 0;

        if (constraints->min_uA > constraints->max_uA) {
                rdev_err(rdev, "Invalid current constraints\n");
                return -EINVAL;
        }

        if (!ops->set_current_limit || !ops->get_current_limit) {
                rdev_warn(rdev, "Operation of current configuration missing\n");
                return 0;
        }

        /* Set regulator current in constraints range */
        ret = ops->set_current_limit(rdev, constraints->min_uA,
                        constraints->max_uA);
        if (ret < 0) {
                rdev_err(rdev, "Failed to set current constraint, %d\n", ret);
                return ret;
        }

        return 0;
}

static int _regulator_do_enable(struct regulator_dev *rdev);

/**
 * set_machine_constraints - sets regulator constraints
 * @rdev: regulator source
 * @constraints: constraints to apply
 *
 * Allows platform initialisation code to define and constrain
 * regulator circuits e.g. valid voltage/current ranges, etc.  NOTE:
 * Constraints *must* be set by platform code in order for some
 * regulator operations to proceed i.e. set_voltage, set_current_limit,
 * set_mode.
 */
static int set_machine_constraints(struct regulator_dev *rdev,
        const struct regulation_constraints *constraints)
{
        int ret = 0;
        const struct regulator_ops *ops = rdev->desc->ops;

        if (constraints)
                rdev->constraints = kmemdup(constraints, sizeof(*constraints),
                                            GFP_KERNEL);
        else
                rdev->constraints = kzalloc(sizeof(*constraints),
                                            GFP_KERNEL);
        if (!rdev->constraints)
                return -ENOMEM;

        ret = machine_constraints_voltage(rdev, rdev->constraints);
        if (ret != 0)
                return ret;

        ret = machine_constraints_current(rdev, rdev->constraints);
        if (ret != 0)
                return ret;

        if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
                ret = ops->set_input_current_limit(rdev,
                                                   rdev->constraints->ilim_uA);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set input limit\n");
                        return ret;
                }
        }

        /* do we need to setup our suspend state */
        if (rdev->constraints->initial_state) {
                ret = suspend_prepare(rdev, rdev->constraints->initial_state);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set suspend state\n");
                        return ret;
                }
        }

        if (rdev->constraints->initial_mode) {
                if (!ops->set_mode) {
                        rdev_err(rdev, "no set_mode operation\n");
                        return -EINVAL;
                }

                ret = ops->set_mode(rdev, rdev->constraints->initial_mode);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set initial mode: %d\n", ret);
                        return ret;
                }
        }

        /* If the constraints say the regulator should be on at this point
         * and we have control then make sure it is enabled.
         */
        if (rdev->constraints->always_on || rdev->constraints->boot_on) {
                ret = _regulator_do_enable(rdev);
                if (ret < 0 && ret != -EINVAL) {
                        rdev_err(rdev, "failed to enable\n");
                        return ret;
                }
        }

        if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable)
                && ops->set_ramp_delay) {
                ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set ramp_delay\n");
                        return ret;
                }
        }

        if (rdev->constraints->pull_down && ops->set_pull_down) {
                ret = ops->set_pull_down(rdev);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set pull down\n");
                        return ret;
                }
        }

        if (rdev->constraints->soft_start && ops->set_soft_start) {
                ret = ops->set_soft_start(rdev);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set soft start\n");
                        return ret;
                }
        }

        if (rdev->constraints->over_current_protection
                && ops->set_over_current_protection) {
                ret = ops->set_over_current_protection(rdev);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set over current protection\n");
                        return ret;
                }
        }

        if (rdev->constraints->active_discharge && ops->set_active_discharge) {
                bool ad_state = (rdev->constraints->active_discharge ==
                              REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false;

                ret = ops->set_active_discharge(rdev, ad_state);
                if (ret < 0) {
                        rdev_err(rdev, "failed to set active discharge\n");
                        return ret;
                }
        }

        print_constraints(rdev);
        return 0;
}

/**
 * set_supply - set regulator supply regulator
 * @rdev: regulator name
 * @supply_rdev: supply regulator name
 *
 * Called by platform initialisation code to set the supply regulator for this
 * regulator. This ensures that a regulators supply will also be enabled by the
 * core if it's child is enabled.
 */
static int set_supply(struct regulator_dev *rdev,
                      struct regulator_dev *supply_rdev)
{
        int err;

        rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev));

        if (!try_module_get(supply_rdev->owner))
                return -ENODEV;

        rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
        if (rdev->supply == NULL) {
                err = -ENOMEM;
                return err;
        }
        supply_rdev->open_count++;

        return 0;
}

/**
 * set_consumer_device_supply - Bind a regulator to a symbolic supply
 * @rdev:         regulator source
 * @consumer_dev_name: dev_name() string for device supply applies to
 * @supply:       symbolic name for supply
 *
 * Allows platform initialisation code to map physical regulator
 * sources to symbolic names for supplies for use by devices.  Devices
 * should use these symbolic names to request regulators, avoiding the
 * need to provide board-specific regulator names as platform data.
 */
static int set_consumer_device_supply(struct regulator_dev *rdev,
                                      const char *consumer_dev_name,
                                      const char *supply)
{
        struct regulator_map *node;
        int has_dev;

        if (supply == NULL)
                return -EINVAL;

        if (consumer_dev_name != NULL)
                has_dev = 1;
        else
                has_dev = 0;

        list_for_each_entry(node, &regulator_map_list, list) {
                if (node->dev_name && consumer_dev_name) {
                        if (strcmp(node->dev_name, consumer_dev_name) != 0)
                                continue;
                } else if (node->dev_name || consumer_dev_name) {
                        continue;
                }

                if (strcmp(node->supply, supply) != 0)
                        continue;

                pr_debug("%s: %s/%s is '%s' supply; fail %s/%s\n",
                         consumer_dev_name,
                         dev_name(&node->regulator->dev),
                         node->regulator->desc->name,
                         supply,
                         dev_name(&rdev->dev), rdev_get_name(rdev));
                return -EBUSY;
        }

        node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
        if (node == NULL)
                return -ENOMEM;

        node->regulator = rdev;
        node->supply = supply;

        if (has_dev) {
                node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
                if (node->dev_name == NULL) {
                        kfree(node);
                        return -ENOMEM;
                }
        }

        list_add(&node->list, &regulator_map_list);
        return 0;
}

static void unset_regulator_supplies(struct regulator_dev *rdev)
{
        struct regulator_map *node, *n;

        list_for_each_entry_safe(node, n, &regulator_map_list, list) {
                if (rdev == node->regulator) {
                        list_del(&node->list);
                        kfree(node->dev_name);
                        kfree(node);
                }
        }
}

#ifdef CONFIG_DEBUG_FS
static ssize_t constraint_flags_read_file(struct file *file,
                                          char __user *user_buf,
                                          size_t count, loff_t *ppos)
{
        const struct regulator *regulator = file->private_data;
        const struct regulation_constraints *c = regulator->rdev->constraints;
        char *buf;
        ssize_t ret;

        if (!c)
                return 0;

        buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
        if (!buf)
                return -ENOMEM;

        ret = snprintf(buf, PAGE_SIZE,
                        "always_on: %u\n"
                        "boot_on: %u\n"
                        "apply_uV: %u\n"
                        "ramp_disable: %u\n"
                        "soft_start: %u\n"
                        "pull_down: %u\n"
                        "over_current_protection: %u\n",
                        c->always_on,
                        c->boot_on,
                        c->apply_uV,
                        c->ramp_disable,
                        c->soft_start,
                        c->pull_down,
                        c->over_current_protection);

        ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
        kfree(buf);

        return ret;
}

#endif

static const struct file_operations constraint_flags_fops = {
#ifdef CONFIG_DEBUG_FS
        .open = simple_open,
        .read = constraint_flags_read_file,
        .llseek = default_llseek,
#endif
};

#define REG_STR_SIZE    64

static struct regulator *create_regulator(struct regulator_dev *rdev,
                                          struct device *dev,
                                          const char *supply_name)
{
        struct regulator *regulator;
        char buf[REG_STR_SIZE];
        int err, size;

        regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
        if (regulator == NULL)
                return NULL;

        mutex_lock(&rdev->mutex);
        regulator->rdev = rdev;
        list_add(&regulator->list, &rdev->consumer_list);

        if (dev) {
                regulator->dev = dev;

                /* Add a link to the device sysfs entry */
                size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
                                 dev->kobj.name, supply_name);
                if (size >= REG_STR_SIZE)
                        goto overflow_err;

                regulator->supply_name = kstrdup(buf, GFP_KERNEL);
                if (regulator->supply_name == NULL)
                        goto overflow_err;

                err = sysfs_create_link_nowarn(&rdev->dev.kobj, &dev->kobj,
                                        buf);
                if (err) {
                        rdev_dbg(rdev, "could not add device link %s err %d\n",
                                  dev->kobj.name, err);
                        /* non-fatal */
                }
        } else {
                regulator->supply_name = kstrdup(supply_name, GFP_KERNEL);
                if (regulator->supply_name == NULL)
                        goto overflow_err;
        }

        regulator->debugfs = debugfs_create_dir(regulator->supply_name,
                                                rdev->debugfs);
        if (!regulator->debugfs) {
                rdev_dbg(rdev, "Failed to create debugfs directory\n");
        } else {
                debugfs_create_u32("uA_load", 0444, regulator->debugfs,
                                   &regulator->uA_load);
                debugfs_create_u32("min_uV", 0444, regulator->debugfs,
                                   &regulator->min_uV);
                debugfs_create_u32("max_uV", 0444, regulator->debugfs,
                                   &regulator->max_uV);
                debugfs_create_file("constraint_flags", 0444,
                                    regulator->debugfs, regulator,
                                    &constraint_flags_fops);
        }

        /*
         * Check now if the regulator is an always on regulator - if
         * it is then we don't need to do nearly so much work for
         * enable/disable calls.
         */
        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS) &&
            _regulator_is_enabled(rdev))
                regulator->always_on = true;

        mutex_unlock(&rdev->mutex);
        return regulator;
overflow_err:
        list_del(&regulator->list);
        kfree(regulator);
        mutex_unlock(&rdev->mutex);
        return NULL;
}

static int _regulator_get_enable_time(struct regulator_dev *rdev)
{
        if (rdev->constraints && rdev->constraints->enable_time)
                return rdev->constraints->enable_time;
        if (!rdev->desc->ops->enable_time)
                return rdev->desc->enable_time;
        return rdev->desc->ops->enable_time(rdev);
}

static struct regulator_supply_alias *regulator_find_supply_alias(
                struct device *dev, const char *supply)
{
        struct regulator_supply_alias *map;

        list_for_each_entry(map, &regulator_supply_alias_list, list)
                if (map->src_dev == dev && strcmp(map->src_supply, supply) == 0)
                        return map;

        return NULL;
}

static void regulator_supply_alias(struct device **dev, const char **supply)
{
        struct regulator_supply_alias *map;

        map = regulator_find_supply_alias(*dev, *supply);
        if (map) {
                dev_dbg(*dev, "Mapping supply %s to %s,%s\n",
                                *supply, map->alias_supply,
                                dev_name(map->alias_dev));
                *dev = map->alias_dev;
                *supply = map->alias_supply;
        }
}

static int of_node_match(struct device *dev, const void *data)
{
        return dev->of_node == data;
}

static struct regulator_dev *of_find_regulator_by_node(struct device_node *np)
{
        struct device *dev;

        dev = class_find_device(&regulator_class, NULL, np, of_node_match);

        return dev ? dev_to_rdev(dev) : NULL;
}

static int regulator_match(struct device *dev, const void *data)
{
        struct regulator_dev *r = dev_to_rdev(dev);

        return strcmp(rdev_get_name(r), data) == 0;
}

static struct regulator_dev *regulator_lookup_by_name(const char *name)
{
        struct device *dev;

        dev = class_find_device(&regulator_class, NULL, name, regulator_match);

        return dev ? dev_to_rdev(dev) : NULL;
}

/**
 * regulator_dev_lookup - lookup a regulator device.
 * @dev: device for regulator "consumer".
 * @supply: Supply name or regulator ID.
 * @ret: 0 on success, -ENODEV if lookup fails permanently, -EPROBE_DEFER if
 * lookup could succeed in the future.
 *
 * If successful, returns a struct regulator_dev that corresponds to the name
 * @supply and with the embedded struct device refcount incremented by one,
 * or NULL on failure. The refcount must be dropped by calling put_device().
 */
static struct regulator_dev *regulator_dev_lookup(struct device *dev,
                                                  const char *supply,
                                                  int *ret)
{
        struct regulator_dev *r;
        struct device_node *node;
        struct regulator_map *map;
        const char *devname = NULL;

        regulator_supply_alias(&dev, &supply);

        /* first do a dt based lookup */
        if (dev && dev->of_node) {
                node = of_get_regulator(dev, supply);
                if (node) {
                        r = of_find_regulator_by_node(node);
                        if (r)
                                return r;
                        *ret = -EPROBE_DEFER;
                        return NULL;
                } else {
                        /*
                         * If we couldn't even get the node then it's
                         * not just that the device didn't register
                         * yet, there's no node and we'll never
                         * succeed.
                         */
                        *ret = -ENODEV;
                }
        }

        /* if not found, try doing it non-dt way */
        if (dev)
                devname = dev_name(dev);

        r = regulator_lookup_by_name(supply);
        if (r)
                return r;

        mutex_lock(&regulator_list_mutex);
        list_for_each_entry(map, &regulator_map_list, list) {
                /* If the mapping has a device set up it must match */
                if (map->dev_name &&
                    (!devname || strcmp(map->dev_name, devname)))
                        continue;

                if (strcmp(map->supply, supply) == 0 &&
                    get_device(&map->regulator->dev)) {
                        mutex_unlock(&regulator_list_mutex);
                        return map->regulator;
                }
        }
        mutex_unlock(&regulator_list_mutex);

        return NULL;
}

static int regulator_resolve_supply(struct regulator_dev *rdev)
{
        struct regulator_dev *r;
        struct device *dev = rdev->dev.parent;
        int ret;

        /* No supply to resovle? */
        if (!rdev->supply_name)
                return 0;

        /* Supply already resolved? */
        if (rdev->supply)
                return 0;

        r = regulator_dev_lookup(dev, rdev->supply_name, &ret);
        if (!r) {
                if (ret == -ENODEV) {
                        /*
                         * No supply was specified for this regulator and
                         * there will never be one.
                         */
                        return 0;
                }

                /* Did the lookup explicitly defer for us? */
                if (ret == -EPROBE_DEFER)
                        return ret;

                if (have_full_constraints()) {
                        r = dummy_regulator_rdev;
                        get_device(&r->dev);
                } else {
                        dev_err(dev, "Failed to resolve %s-supply for %s\n",
                                rdev->supply_name, rdev->desc->name);
                        return -EPROBE_DEFER;
                }
        }

        /* Recursively resolve the supply of the supply */
        ret = regulator_resolve_supply(r);
        if (ret < 0) {
                put_device(&r->dev);
                return ret;
        }

        ret = set_supply(rdev, r);
        if (ret < 0) {
                put_device(&r->dev);
                return ret;
        }

        /* Cascade always-on state to supply */
        if (_regulator_is_enabled(rdev)) {
                ret = regulator_enable(rdev->supply);
                if (ret < 0) {
                        _regulator_put(rdev->supply);
                        rdev->supply = NULL;
                        return ret;
                }
        }

        return 0;
}

/* Internal regulator request function */
static struct regulator *_regulator_get(struct device *dev, const char *id,
                                        bool exclusive, bool allow_dummy)
{
        struct regulator_dev *rdev;
        struct regulator *regulator = ERR_PTR(-EPROBE_DEFER);
        const char *devname = NULL;
        int ret;

        if (id == NULL) {
                pr_err("get() with no identifier\n");
                return ERR_PTR(-EINVAL);
        }

        if (dev)
                devname = dev_name(dev);

        if (have_full_constraints())
                ret = -ENODEV;
        else
                ret = -EPROBE_DEFER;

        rdev = regulator_dev_lookup(dev, id, &ret);
        if (rdev)
                goto found;

        regulator = ERR_PTR(ret);

        /*
         * If we have return value from dev_lookup fail, we do not expect to
         * succeed, so, quit with appropriate error value
         */
        if (ret && ret != -ENODEV)
                return regulator;

        if (!devname)
                devname = "deviceless";

        /*
         * Assume that a regulator is physically present and enabled
         * even if it isn't hooked up and just provide a dummy.
         */
        if (have_full_constraints() && allow_dummy) {
                pr_warn("%s supply %s not found, using dummy regulator\n",
                        devname, id);

                rdev = dummy_regulator_rdev;
                get_device(&rdev->dev);
                goto found;
        /* Don't log an error when called from regulator_get_optional() */
        } else if (!have_full_constraints() || exclusive) {
                dev_warn(dev, "dummy supplies not allowed\n");
        }

        return regulator;

found:
        if (rdev->exclusive) {
                regulator = ERR_PTR(-EPERM);
                put_device(&rdev->dev);
                return regulator;
        }

        if (exclusive && rdev->open_count) {
                regulator = ERR_PTR(-EBUSY);
                put_device(&rdev->dev);
                return regulator;
        }

        ret = regulator_resolve_supply(rdev);
        if (ret < 0) {
                regulator = ERR_PTR(ret);
                put_device(&rdev->dev);
                return regulator;
        }

        if (!try_module_get(rdev->owner)) {
                put_device(&rdev->dev);
                return regulator;
        }

        regulator = create_regulator(rdev, dev, id);
        if (regulator == NULL) {
                regulator = ERR_PTR(-ENOMEM);
                put_device(&rdev->dev);
                module_put(rdev->owner);
                return regulator;
        }

        rdev->open_count++;
        if (exclusive) {
                rdev->exclusive = 1;

                ret = _regulator_is_enabled(rdev);
                if (ret > 0)
                        rdev->use_count = 1;
                else
                        rdev->use_count = 0;
        }

        return regulator;
}

/**
 * regulator_get - lookup and obtain a reference to a regulator.
 * @dev: device for regulator "consumer"
 * @id: Supply name or regulator ID.
 *
 * Returns a struct regulator corresponding to the regulator producer,
 * or IS_ERR() condition containing errno.
 *
 * Use of supply names configured via regulator_set_device_supply() is
 * strongly encouraged.  It is recommended that the supply name used
 * should match the name used for the supply and/or the relevant
 * device pins in the datasheet.
 */
struct regulator *regulator_get(struct device *dev, const char *id)
{
        return _regulator_get(dev, id, false, true);
}
EXPORT_SYMBOL_GPL(regulator_get);

/**
 * regulator_get_exclusive - obtain exclusive access to a regulator.
 * @dev: device for regulator "consumer"
 * @id: Supply name or regulator ID.
 *
 * Returns a struct regulator corresponding to the regulator producer,
 * or IS_ERR() condition containing errno.  Other consumers will be
 * unable to obtain this regulator while this reference is held and the
 * use count for the regulator will be initialised to reflect the current
 * state of the regulator.
 *
 * This is intended for use by consumers which cannot tolerate shared
 * use of the regulator such as those which need to force the
 * regulator off for correct operation of the hardware they are
 * controlling.
 *
 * Use of supply names configured via regulator_set_device_supply() is
 * strongly encouraged.  It is recommended that the supply name used
 * should match the name used for the supply and/or the relevant
 * device pins in the datasheet.
 */
struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
{
        return _regulator_get(dev, id, true, false);
}
EXPORT_SYMBOL_GPL(regulator_get_exclusive);

/**
 * regulator_get_optional - obtain optional access to a regulator.
 * @dev: device for regulator "consumer"
 * @id: Supply name or regulator ID.
 *
 * Returns a struct regulator corresponding to the regulator producer,
 * or IS_ERR() condition containing errno.
 *
 * This is intended for use by consumers for devices which can have
 * some supplies unconnected in normal use, such as some MMC devices.
 * It can allow the regulator core to provide stub supplies for other
 * supplies requested using normal regulator_get() calls without
 * disrupting the operation of drivers that can handle absent
 * supplies.
 *
 * Use of supply names configured via regulator_set_device_supply() is
 * strongly encouraged.  It is recommended that the supply name used
 * should match the name used for the supply and/or the relevant
 * device pins in the datasheet.
 */
struct regulator *regulator_get_optional(struct device *dev, const char *id)
{
        return _regulator_get(dev, id, false, false);
}
EXPORT_SYMBOL_GPL(regulator_get_optional);

/* regulator_list_mutex lock held by regulator_put() */
static void _regulator_put(struct regulator *regulator)
{
        struct regulator_dev *rdev;

        if (IS_ERR_OR_NULL(regulator))
                return;

        lockdep_assert_held_once(&regulator_list_mutex);

        rdev = regulator->rdev;

        debugfs_remove_recursive(regulator->debugfs);

        /* remove any sysfs entries */
        if (regulator->dev)
                sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
        mutex_lock(&rdev->mutex);
        list_del(&regulator->list);

        rdev->open_count--;
        rdev->exclusive = 0;
        put_device(&rdev->dev);
        mutex_unlock(&rdev->mutex);

        kfree(regulator->supply_name);
        kfree(regulator);

        module_put(rdev->owner);
}

/**
 * regulator_put - "free" the regulator source
 * @regulator: regulator source
 *
 * Note: drivers must ensure that all regulator_enable calls made on this
 * regulator source are balanced by regulator_disable calls prior to calling
 * this function.
 */
void regulator_put(struct regulator *regulator)
{
        mutex_lock(&regulator_list_mutex);
        _regulator_put(regulator);
        mutex_unlock(&regulator_list_mutex);
}
EXPORT_SYMBOL_GPL(regulator_put);

/**
 * regulator_register_supply_alias - Provide device alias for supply lookup
 *
 * @dev: device that will be given as the regulator "consumer"
 * @id: Supply name or regulator ID
 * @alias_dev: device that should be used to lookup the supply
 * @alias_id: Supply name or regulator ID that should be used to lookup the
 * supply
 *
 * All lookups for id on dev will instead be conducted for alias_id on
 * alias_dev.
 */
int regulator_register_supply_alias(struct device *dev, const char *id,
                                    struct device *alias_dev,
                                    const char *alias_id)
{
        struct regulator_supply_alias *map;

        map = regulator_find_supply_alias(dev, id);
        if (map)
                return -EEXIST;

        map = kzalloc(sizeof(struct regulator_supply_alias), GFP_KERNEL);
        if (!map)
                return -ENOMEM;

        map->src_dev = dev;
        map->src_supply = id;
        map->alias_dev = alias_dev;
        map->alias_supply = alias_id;

        list_add(&map->list, &regulator_supply_alias_list);

        pr_info("Adding alias for supply %s,%s -> %s,%s\n",
                id, dev_name(dev), alias_id, dev_name(alias_dev));

        return 0;
}
EXPORT_SYMBOL_GPL(regulator_register_supply_alias);

/**
 * regulator_unregister_supply_alias - Remove device alias
 *
 * @dev: device that will be given as the regulator "consumer"
 * @id: Supply name or regulator ID
 *
 * Remove a lookup alias if one exists for id on dev.
 */
void regulator_unregister_supply_alias(struct device *dev, const char *id)
{
        struct regulator_supply_alias *map;

        map = regulator_find_supply_alias(dev, id);
        if (map) {
                list_del(&map->list);
                kfree(map);
        }
}
EXPORT_SYMBOL_GPL(regulator_unregister_supply_alias);

/**
 * regulator_bulk_register_supply_alias - register multiple aliases
 *
 * @dev: device that will be given as the regulator "consumer"
 * @id: List of supply names or regulator IDs
 * @alias_dev: device that should be used to lookup the supply
 * @alias_id: List of supply names or regulator IDs that should be used to
 * lookup the supply
 * @num_id: Number of aliases to register
 *
 * @return 0 on success, an errno on failure.
 *
 * This helper function allows drivers to register several supply
 * aliases in one operation.  If any of the aliases cannot be
 * registered any aliases that were registered will be removed
 * before returning to the caller.
 */
int regulator_bulk_register_supply_alias(struct device *dev,
                                         const char *const *id,
                                         struct device *alias_dev,
                                         const char *const *alias_id,
                                         int num_id)
{
        int i;
        int ret;

        for (i = 0; i < num_id; ++i) {
                ret = regulator_register_supply_alias(dev, id[i], alias_dev,
                                                      alias_id[i]);
                if (ret < 0)
                        goto err;
        }

        return 0;

err:
        dev_err(dev,
                "Failed to create supply alias %s,%s -> %s,%s\n",
                id[i], dev_name(dev), alias_id[i], dev_name(alias_dev));

        while (--i >= 0)
                regulator_unregister_supply_alias(dev, id[i]);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_bulk_register_supply_alias);

/**
 * regulator_bulk_unregister_supply_alias - unregister multiple aliases
 *
 * @dev: device that will be given as the regulator "consumer"
 * @id: List of supply names or regulator IDs
 * @num_id: Number of aliases to unregister
 *
 * This helper function allows drivers to unregister several supply
 * aliases in one operation.
 */
void regulator_bulk_unregister_supply_alias(struct device *dev,
                                            const char *const *id,
                                            int num_id)
{
        int i;

        for (i = 0; i < num_id; ++i)
                regulator_unregister_supply_alias(dev, id[i]);
}
EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias);


/* Manage enable GPIO list. Same GPIO pin can be shared among regulators */
static int regulator_ena_gpio_request(struct regulator_dev *rdev,
                                const struct regulator_config *config)
{
        struct regulator_enable_gpio *pin;
        struct gpio_desc *gpiod;
        int ret;

        gpiod = gpio_to_desc(config->ena_gpio);

        list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
                if (pin->gpiod == gpiod) {
                        rdev_dbg(rdev, "GPIO %d is already used\n",
                                config->ena_gpio);
                        goto update_ena_gpio_to_rdev;
                }
        }

        ret = gpio_request_one(config->ena_gpio,
                                GPIOF_DIR_OUT | config->ena_gpio_flags,
                                rdev_get_name(rdev));
        if (ret)
                return ret;

        pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
        if (pin == NULL) {
                gpio_free(config->ena_gpio);
                return -ENOMEM;
        }

        pin->gpiod = gpiod;
        pin->ena_gpio_invert = config->ena_gpio_invert;
        list_add(&pin->list, &regulator_ena_gpio_list);

update_ena_gpio_to_rdev:
        pin->request_count++;
        rdev->ena_pin = pin;
        return 0;
}

static void regulator_ena_gpio_free(struct regulator_dev *rdev)
{
        struct regulator_enable_gpio *pin, *n;

        if (!rdev->ena_pin)
                return;

        /* Free the GPIO only in case of no use */
        list_for_each_entry_safe(pin, n, &regulator_ena_gpio_list, list) {
                if (pin->gpiod == rdev->ena_pin->gpiod) {
                        if (pin->request_count <= 1) {
                                pin->request_count = 0;
                                gpiod_put(pin->gpiod);
                                list_del(&pin->list);
                                kfree(pin);
                                rdev->ena_pin = NULL;
                                return;
                        } else {
                                pin->request_count--;
                        }
                }
        }
}

/**
 * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control
 * @rdev: regulator_dev structure
 * @enable: enable GPIO at initial use?
 *
 * GPIO is enabled in case of initial use. (enable_count is 0)
 * GPIO is disabled when it is not shared any more. (enable_count <= 1)
 */
static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
{
        struct regulator_enable_gpio *pin = rdev->ena_pin;

        if (!pin)
                return -EINVAL;

        if (enable) {
                /* Enable GPIO at initial use */
                if (pin->enable_count == 0)
                        gpiod_set_value_cansleep(pin->gpiod,
                                                 !pin->ena_gpio_invert);

                pin->enable_count++;
        } else {
                if (pin->enable_count > 1) {
                        pin->enable_count--;
                        return 0;
                }

                /* Disable GPIO if not used */
                if (pin->enable_count <= 1) {
                        gpiod_set_value_cansleep(pin->gpiod,
                                                 pin->ena_gpio_invert);
                        pin->enable_count = 0;
                }
        }

        return 0;
}

/**
 * _regulator_enable_delay - a delay helper function
 * @delay: time to delay in microseconds
 *
 * Delay for the requested amount of time as per the guidelines in:
 *
 *     Documentation/timers/timers-howto.txt
 *
 * The assumption here is that regulators will never be enabled in
 * atomic context and therefore sleeping functions can be used.
 */
static void _regulator_enable_delay(unsigned int delay)
{
        unsigned int ms = delay / 1000;
        unsigned int us = delay % 1000;

        if (ms > 0) {
                /*
                 * For small enough values, handle super-millisecond
                 * delays in the usleep_range() call below.
                 */
                if (ms < 20)
                        us += ms * 1000;
                else
                        msleep(ms);
        }

        /*
         * Give the scheduler some room to coalesce with any other
         * wakeup sources. For delays shorter than 10 us, don't even
         * bother setting up high-resolution timers and just busy-
         * loop.
         */
        if (us >= 10)
                usleep_range(us, us + 100);
        else
                udelay(us);
}

static int _regulator_do_enable(struct regulator_dev *rdev)
{
        int ret, delay;

        /* Query before enabling in case configuration dependent.  */
        ret = _regulator_get_enable_time(rdev);
        if (ret >= 0) {
                delay = ret;
        } else {
                rdev_warn(rdev, "enable_time() failed: %d\n", ret);
                delay = 0;
        }

        trace_regulator_enable(rdev_get_name(rdev));

        if (rdev->desc->off_on_delay) {
                /* if needed, keep a distance of off_on_delay from last time
                 * this regulator was disabled.
                 */
                unsigned long start_jiffy = jiffies;
                unsigned long intended, max_delay, remaining;

                max_delay = usecs_to_jiffies(rdev->desc->off_on_delay);
                intended = rdev->last_off_jiffy + max_delay;

                if (time_before(start_jiffy, intended)) {
                        /* calc remaining jiffies to deal with one-time
                         * timer wrapping.
                         * in case of multiple timer wrapping, either it can be
                         * detected by out-of-range remaining, or it cannot be
                         * detected and we gets a panelty of
                         * _regulator_enable_delay().
                         */
                        remaining = intended - start_jiffy;
                        if (remaining <= max_delay)
                                _regulator_enable_delay(
                                                jiffies_to_usecs(remaining));
                }
        }

        if (rdev->ena_pin) {
                if (!rdev->ena_gpio_state) {
                        ret = regulator_ena_gpio_ctrl(rdev, true);
                        if (ret < 0)
                                return ret;
                        rdev->ena_gpio_state = 1;
                }
        } else if (rdev->desc->ops->enable) {
                ret = rdev->desc->ops->enable(rdev);
                if (ret < 0)
                        return ret;
        } else {
                return -EINVAL;
        }

        /* Allow the regulator to ramp; it would be useful to extend
         * this for bulk operations so that the regulators can ramp
         * together.  */
        trace_regulator_enable_delay(rdev_get_name(rdev));

        _regulator_enable_delay(delay);

        trace_regulator_enable_complete(rdev_get_name(rdev));

        return 0;
}

/* locks held by regulator_enable() */
static int _regulator_enable(struct regulator_dev *rdev)
{
        int ret;

        lockdep_assert_held_once(&rdev->mutex);

        /* check voltage and requested load before enabling */
        if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
                drms_uA_update(rdev);

        if (rdev->use_count == 0) {
                /* The regulator may on if it's not switchable or left on */
                ret = _regulator_is_enabled(rdev);
                if (ret == -EINVAL || ret == 0) {
                        if (!regulator_ops_is_valid(rdev,
                                        REGULATOR_CHANGE_STATUS))
                                return -EPERM;

                        ret = _regulator_do_enable(rdev);
                        if (ret < 0)
                                return ret;

                } else if (ret < 0) {
                        rdev_err(rdev, "is_enabled() failed: %d\n", ret);
                        return ret;
                }
                /* Fallthrough on positive return values - already enabled */
        }

        rdev->use_count++;

        return 0;
}

/**
 * regulator_enable - enable regulator output
 * @regulator: regulator source
 *
 * Request that the regulator be enabled with the regulator output at
 * the predefined voltage or current value.  Calls to regulator_enable()
 * must be balanced with calls to regulator_disable().
 *
 * NOTE: the output value can be set by other drivers, boot loader or may be
 * hardwired in the regulator.
 */
int regulator_enable(struct regulator *regulator)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret = 0;

        if (regulator->always_on)
                return 0;

        if (rdev->supply) {
                ret = regulator_enable(rdev->supply);
                if (ret != 0)
                        return ret;
        }

        mutex_lock(&rdev->mutex);
        ret = _regulator_enable(rdev);
        mutex_unlock(&rdev->mutex);

        if (ret != 0 && rdev->supply)
                regulator_disable(rdev->supply);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_enable);

static int _regulator_do_disable(struct regulator_dev *rdev)
{
        int ret;

        trace_regulator_disable(rdev_get_name(rdev));

        if (rdev->ena_pin) {
                if (rdev->ena_gpio_state) {
                        ret = regulator_ena_gpio_ctrl(rdev, false);
                        if (ret < 0)
                                return ret;
                        rdev->ena_gpio_state = 0;
                }

        } else if (rdev->desc->ops->disable) {
                ret = rdev->desc->ops->disable(rdev);
                if (ret != 0)
                        return ret;
        }

        /* cares about last_off_jiffy only if off_on_delay is required by
         * device.
         */
        if (rdev->desc->off_on_delay)
                rdev->last_off_jiffy = jiffies;

        trace_regulator_disable_complete(rdev_get_name(rdev));

        return 0;
}

/* locks held by regulator_disable() */
static int _regulator_disable(struct regulator_dev *rdev)
{
        int ret = 0;

        lockdep_assert_held_once(&rdev->mutex);

        if (WARN(rdev->use_count <= 0,
                 "unbalanced disables for %s\n", rdev_get_name(rdev)))
                return -EIO;

        /* are we the last user and permitted to disable ? */
        if (rdev->use_count == 1 &&
            (rdev->constraints && !rdev->constraints->always_on)) {

                /* we are last user */
                if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) {
                        ret = _notifier_call_chain(rdev,
                                                   REGULATOR_EVENT_PRE_DISABLE,
                                                   NULL);
                        if (ret & NOTIFY_STOP_MASK)
                                return -EINVAL;

                        ret = _regulator_do_disable(rdev);
                        if (ret < 0) {
                                rdev_err(rdev, "failed to disable\n");
                                _notifier_call_chain(rdev,
                                                REGULATOR_EVENT_ABORT_DISABLE,
                                                NULL);
                                return ret;
                        }
                        _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
                                        NULL);
                }

                rdev->use_count = 0;
        } else if (rdev->use_count > 1) {
                if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
                        drms_uA_update(rdev);

                rdev->use_count--;
        }

        return ret;
}

/**
 * regulator_disable - disable regulator output
 * @regulator: regulator source
 *
 * Disable the regulator output voltage or current.  Calls to
 * regulator_enable() must be balanced with calls to
 * regulator_disable().
 *
 * NOTE: this will only disable the regulator output if no other consumer
 * devices have it enabled, the regulator device supports disabling and
 * machine constraints permit this operation.
 */
int regulator_disable(struct regulator *regulator)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret = 0;

        if (regulator->always_on)
                return 0;

        mutex_lock(&rdev->mutex);
        ret = _regulator_disable(rdev);
        mutex_unlock(&rdev->mutex);

        if (ret == 0 && rdev->supply)
                regulator_disable(rdev->supply);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_disable);

/* locks held by regulator_force_disable() */
static int _regulator_force_disable(struct regulator_dev *rdev)
{
        int ret = 0;

        lockdep_assert_held_once(&rdev->mutex);

        ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
                        REGULATOR_EVENT_PRE_DISABLE, NULL);
        if (ret & NOTIFY_STOP_MASK)
                return -EINVAL;

        ret = _regulator_do_disable(rdev);
        if (ret < 0) {
                rdev_err(rdev, "failed to force disable\n");
                _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
                                REGULATOR_EVENT_ABORT_DISABLE, NULL);
                return ret;
        }

        _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
                        REGULATOR_EVENT_DISABLE, NULL);

        return 0;
}

/**
 * regulator_force_disable - force disable regulator output
 * @regulator: regulator source
 *
 * Forcibly disable the regulator output voltage or current.
 * NOTE: this *will* disable the regulator output even if other consumer
 * devices have it enabled. This should be used for situations when device
 * damage will likely occur if the regulator is not disabled (e.g. over temp).
 */
int regulator_force_disable(struct regulator *regulator)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret;

        mutex_lock(&rdev->mutex);
        regulator->uA_load = 0;
        ret = _regulator_force_disable(regulator->rdev);
        mutex_unlock(&rdev->mutex);

        if (rdev->supply)
                while (rdev->open_count--)
                        regulator_disable(rdev->supply);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_force_disable);

static void regulator_disable_work(struct work_struct *work)
{
        struct regulator_dev *rdev = container_of(work, struct regulator_dev,
                                                  disable_work.work);
        int count, i, ret;

        mutex_lock(&rdev->mutex);

        BUG_ON(!rdev->deferred_disables);

        count = rdev->deferred_disables;
        rdev->deferred_disables = 0;

        for (i = 0; i < count; i++) {
                ret = _regulator_disable(rdev);
                if (ret != 0)
                        rdev_err(rdev, "Deferred disable failed: %d\n", ret);
        }

        mutex_unlock(&rdev->mutex);

        if (rdev->supply) {
                for (i = 0; i < count; i++) {
                        ret = regulator_disable(rdev->supply);
                        if (ret != 0) {
                                rdev_err(rdev,
                                         "Supply disable failed: %d\n", ret);
                        }
                }
        }
}

/**
 * regulator_disable_deferred - disable regulator output with delay
 * @regulator: regulator source
 * @ms: miliseconds until the regulator is disabled
 *
 * Execute regulator_disable() on the regulator after a delay.  This
 * is intended for use with devices that require some time to quiesce.
 *
 * NOTE: this will only disable the regulator output if no other consumer
 * devices have it enabled, the regulator device supports disabling and
 * machine constraints permit this operation.
 */
int regulator_disable_deferred(struct regulator *regulator, int ms)
{
        struct regulator_dev *rdev = regulator->rdev;

        if (regulator->always_on)
                return 0;

        if (!ms)
                return regulator_disable(regulator);

        mutex_lock(&rdev->mutex);
        rdev->deferred_disables++;
        mutex_unlock(&rdev->mutex);

        queue_delayed_work(system_power_efficient_wq, &rdev->disable_work,
                           msecs_to_jiffies(ms));
        return 0;
}
EXPORT_SYMBOL_GPL(regulator_disable_deferred);

static int _regulator_is_enabled(struct regulator_dev *rdev)
{
        /* A GPIO control always takes precedence */
        if (rdev->ena_pin)
                return rdev->ena_gpio_state;

        /* If we don't know then assume that the regulator is always on */
        if (!rdev->desc->ops->is_enabled)
                return 1;

        return rdev->desc->ops->is_enabled(rdev);
}

static int _regulator_list_voltage(struct regulator *regulator,
                                    unsigned selector, int lock)
{
        struct regulator_dev *rdev = regulator->rdev;
        const struct regulator_ops *ops = rdev->desc->ops;
        int ret;

        if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
                return rdev->desc->fixed_uV;

        if (ops->list_voltage) {
                if (selector >= rdev->desc->n_voltages)
                        return -EINVAL;
                if (lock)
                        mutex_lock(&rdev->mutex);
                ret = ops->list_voltage(rdev, selector);
                if (lock)
                        mutex_unlock(&rdev->mutex);
        } else if (rdev->supply) {
                ret = _regulator_list_voltage(rdev->supply, selector, lock);
        } else {
                return -EINVAL;
        }

        if (ret > 0) {
                if (ret < rdev->constraints->min_uV)
                        ret = 0;
                else if (ret > rdev->constraints->max_uV)
                        ret = 0;
        }

        return ret;
}

/**
 * regulator_is_enabled - is the regulator output enabled
 * @regulator: regulator source
 *
 * Returns positive if the regulator driver backing the source/client
 * has requested that the device be enabled, zero if it hasn't, else a
 * negative errno code.
 *
 * Note that the device backing this regulator handle can have multiple
 * users, so it might be enabled even if regulator_enable() was never
 * called for this particular source.
 */
int regulator_is_enabled(struct regulator *regulator)
{
        int ret;

        if (regulator->always_on)
                return 1;

        mutex_lock(&regulator->rdev->mutex);
        ret = _regulator_is_enabled(regulator->rdev);
        mutex_unlock(&regulator->rdev->mutex);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_is_enabled);

/**
 * regulator_count_voltages - count regulator_list_voltage() selectors
 * @regulator: regulator source
 *
 * Returns number of selectors, or negative errno.  Selectors are
 * numbered starting at zero, and typically correspond to bitfields
 * in hardware registers.
 */
int regulator_count_voltages(struct regulator *regulator)
{
        struct regulator_dev    *rdev = regulator->rdev;

        if (rdev->desc->n_voltages)
                return rdev->desc->n_voltages;

        if (!rdev->supply)
                return -EINVAL;

        return regulator_count_voltages(rdev->supply);
}
EXPORT_SYMBOL_GPL(regulator_count_voltages);

/**
 * regulator_list_voltage - enumerate supported voltages
 * @regulator: regulator source
 * @selector: identify voltage to list
 * Context: can sleep
 *
 * Returns a voltage that can be passed to @regulator_set_voltage(),
 * zero if this selector code can't be used on this system, or a
 * negative errno.
 */
int regulator_list_voltage(struct regulator *regulator, unsigned selector)
{
        return _regulator_list_voltage(regulator, selector, 1);
}
EXPORT_SYMBOL_GPL(regulator_list_voltage);

/**
 * regulator_get_regmap - get the regulator's register map
 * @regulator: regulator source
 *
 * Returns the register map for the given regulator, or an ERR_PTR value
 * if the regulator doesn't use regmap.
 */
struct regmap *regulator_get_regmap(struct regulator *regulator)
{
        struct regmap *map = regulator->rdev->regmap;

        return map ? map : ERR_PTR(-EOPNOTSUPP);
}

/**
 * regulator_get_hardware_vsel_register - get the HW voltage selector register
 * @regulator: regulator source
 * @vsel_reg: voltage selector register, output parameter
 * @vsel_mask: mask for voltage selector bitfield, output parameter
 *
 * Returns the hardware register offset and bitmask used for setting the
 * regulator voltage. This might be useful when configuring voltage-scaling
 * hardware or firmware that can make I2C requests behind the kernel's back,
 * for example.
 *
 * On success, the output parameters @vsel_reg and @vsel_mask are filled in
 * and 0 is returned, otherwise a negative errno is returned.
 */
int regulator_get_hardware_vsel_register(struct regulator *regulator,
                                         unsigned *vsel_reg,
                                         unsigned *vsel_mask)
{
        struct regulator_dev *rdev = regulator->rdev;
        const struct regulator_ops *ops = rdev->desc->ops;

        if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
                return -EOPNOTSUPP;

         *vsel_reg = rdev->desc->vsel_reg;
         *vsel_mask = rdev->desc->vsel_mask;

         return 0;
}
EXPORT_SYMBOL_GPL(regulator_get_hardware_vsel_register);

/**
 * regulator_list_hardware_vsel - get the HW-specific register value for a selector
 * @regulator: regulator source
 * @selector: identify voltage to list
 *
 * Converts the selector to a hardware-specific voltage selector that can be
 * directly written to the regulator registers. The address of the voltage
 * register can be determined by calling @regulator_get_hardware_vsel_register.
 *
 * On error a negative errno is returned.
 */
int regulator_list_hardware_vsel(struct regulator *regulator,
                                 unsigned selector)
{
        struct regulator_dev *rdev = regulator->rdev;
        const struct regulator_ops *ops = rdev->desc->ops;

        if (selector >= rdev->desc->n_voltages)
                return -EINVAL;
        if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
                return -EOPNOTSUPP;

        return selector;
}
EXPORT_SYMBOL_GPL(regulator_list_hardware_vsel);

/**
 * regulator_get_linear_step - return the voltage step size between VSEL values
 * @regulator: regulator source
 *
 * Returns the voltage step size between VSEL values for linear
 * regulators, or return 0 if the regulator isn't a linear regulator.
 */
unsigned int regulator_get_linear_step(struct regulator *regulator)
{
        struct regulator_dev *rdev = regulator->rdev;

        return rdev->desc->uV_step;
}
EXPORT_SYMBOL_GPL(regulator_get_linear_step);

/**
 * regulator_is_supported_voltage - check if a voltage range can be supported
 *
 * @regulator: Regulator to check.
 * @min_uV: Minimum required voltage in uV.
 * @max_uV: Maximum required voltage in uV.
 *
 * Returns a boolean or a negative error code.
 */
int regulator_is_supported_voltage(struct regulator *regulator,
                                   int min_uV, int max_uV)
{
        struct regulator_dev *rdev = regulator->rdev;
        int i, voltages, ret;

        /* If we can't change voltage check the current voltage */
        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
                ret = regulator_get_voltage(regulator);
                if (ret >= 0)
                        return min_uV <= ret && ret <= max_uV;
                else
                        return ret;
        }

        /* Any voltage within constrains range is fine? */
        if (rdev->desc->continuous_voltage_range)
                return min_uV >= rdev->constraints->min_uV &&
                                max_uV <= rdev->constraints->max_uV;

        ret = regulator_count_voltages(regulator);
        if (ret < 0)
                return ret;
        voltages = ret;

        for (i = 0; i < voltages; i++) {
                ret = regulator_list_voltage(regulator, i);

                if (ret >= min_uV && ret <= max_uV)
                        return 1;
        }

        return 0;
}
EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);

static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV,
                                 int max_uV)
{
        const struct regulator_desc *desc = rdev->desc;

        if (desc->ops->map_voltage)
                return desc->ops->map_voltage(rdev, min_uV, max_uV);

        if (desc->ops->list_voltage == regulator_list_voltage_linear)
                return regulator_map_voltage_linear(rdev, min_uV, max_uV);

        if (desc->ops->list_voltage == regulator_list_voltage_linear_range)
                return regulator_map_voltage_linear_range(rdev, min_uV, max_uV);

        return regulator_map_voltage_iterate(rdev, min_uV, max_uV);
}

static int _regulator_call_set_voltage(struct regulator_dev *rdev,
                                       int min_uV, int max_uV,
                                       unsigned *selector)
{
        struct pre_voltage_change_data data;
        int ret;

        data.old_uV = _regulator_get_voltage(rdev);
        data.min_uV = min_uV;
        data.max_uV = max_uV;
        ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE,
                                   &data);
        if (ret & NOTIFY_STOP_MASK)
                return -EINVAL;

        ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, selector);
        if (ret >= 0)
                return ret;

        _notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE,
                             (void *)data.old_uV);

        return ret;
}

static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev,
                                           int uV, unsigned selector)
{
        struct pre_voltage_change_data data;
        int ret;

        data.old_uV = _regulator_get_voltage(rdev);
        data.min_uV = uV;
        data.max_uV = uV;
        ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE,
                                   &data);
        if (ret & NOTIFY_STOP_MASK)
                return -EINVAL;

        ret = rdev->desc->ops->set_voltage_sel(rdev, selector);
        if (ret >= 0)
                return ret;

        _notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE,
                             (void *)data.old_uV);

        return ret;
}

static int _regulator_do_set_voltage(struct regulator_dev *rdev,
                                     int min_uV, int max_uV)
{
        int ret;
        int delay = 0;
        int best_val = 0;
        unsigned int selector;
        int old_selector = -1;

        trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);

        min_uV += rdev->constraints->uV_offset;
        max_uV += rdev->constraints->uV_offset;

        /*
         * If we can't obtain the old selector there is not enough
         * info to call set_voltage_time_sel().
         */
        if (_regulator_is_enabled(rdev) &&
            rdev->desc->ops->set_voltage_time_sel &&
            rdev->desc->ops->get_voltage_sel) {
                old_selector = rdev->desc->ops->get_voltage_sel(rdev);
                if (old_selector < 0)
                        return old_selector;
        }

        if (rdev->desc->ops->set_voltage) {
                ret = _regulator_call_set_voltage(rdev, min_uV, max_uV,
                                                  &selector);

                if (ret >= 0) {
                        if (rdev->desc->ops->list_voltage)
                                best_val = rdev->desc->ops->list_voltage(rdev,
                                                                         selector);
                        else
                                best_val = _regulator_get_voltage(rdev);
                }

        } else if (rdev->desc->ops->set_voltage_sel) {
                ret = regulator_map_voltage(rdev, min_uV, max_uV);
                if (ret >= 0) {
                        best_val = rdev->desc->ops->list_voltage(rdev, ret);
                        if (min_uV <= best_val && max_uV >= best_val) {
                                selector = ret;
                                if (old_selector == selector)
                                        ret = 0;
                                else
                                        ret = _regulator_call_set_voltage_sel(
                                                rdev, best_val, selector);
                        } else {
                                ret = -EINVAL;
                        }
                }
        } else {
                ret = -EINVAL;
        }

        /* Call set_voltage_time_sel if successfully obtained old_selector */
        if (ret == 0 && !rdev->constraints->ramp_disable && old_selector >= 0
                && old_selector != selector) {

                delay = rdev->desc->ops->set_voltage_time_sel(rdev,
                                                old_selector, selector);
                if (delay < 0) {
                        rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n",
                                  delay);
                        delay = 0;
                }

                /* Insert any necessary delays */
                if (delay >= 1000) {
                        mdelay(delay / 1000);
                        udelay(delay % 1000);
                } else if (delay) {
                        udelay(delay);
                }
        }

        if (ret == 0 && best_val >= 0) {
                unsigned long data = best_val;

                _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
                                     (void *)data);
        }

        trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);

        return ret;
}

static int regulator_set_voltage_unlocked(struct regulator *regulator,
                                          int min_uV, int max_uV)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret = 0;
        int old_min_uV, old_max_uV;
        int current_uV;
        int best_supply_uV = 0;
        int supply_change_uV = 0;

        /* If we're setting the same range as last time the change
         * should be a noop (some cpufreq implementations use the same
         * voltage for multiple frequencies, for example).
         */
        if (regulator->min_uV == min_uV && regulator->max_uV == max_uV)
                goto out;

        /* If we're trying to set a range that overlaps the current voltage,
         * return successfully even though the regulator does not support
         * changing the voltage.
         */
        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
                current_uV = _regulator_get_voltage(rdev);
                if (min_uV <= current_uV && current_uV <= max_uV) {
                        regulator->min_uV = min_uV;
                        regulator->max_uV = max_uV;
                        goto out;
                }
        }

        /* sanity check */
        if (!rdev->desc->ops->set_voltage &&
            !rdev->desc->ops->set_voltage_sel) {
                ret = -EINVAL;
                goto out;
        }

        /* constraints check */
        ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
        if (ret < 0)
                goto out;

        /* restore original values in case of error */
        old_min_uV = regulator->min_uV;
        old_max_uV = regulator->max_uV;
        regulator->min_uV = min_uV;
        regulator->max_uV = max_uV;

        ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
        if (ret < 0)
                goto out2;

        if (rdev->supply && (rdev->desc->min_dropout_uV ||
                                !rdev->desc->ops->get_voltage)) {
                int current_supply_uV;
                int selector;

                selector = regulator_map_voltage(rdev, min_uV, max_uV);
                if (selector < 0) {
                        ret = selector;
                        goto out2;
                }

                best_supply_uV = _regulator_list_voltage(regulator, selector, 0);
                if (best_supply_uV < 0) {
                        ret = best_supply_uV;
                        goto out2;
                }

                best_supply_uV += rdev->desc->min_dropout_uV;

                current_supply_uV = _regulator_get_voltage(rdev->supply->rdev);
                if (current_supply_uV < 0) {
                        ret = current_supply_uV;
                        goto out2;
                }

                supply_change_uV = best_supply_uV - current_supply_uV;
        }

        if (supply_change_uV > 0) {
                ret = regulator_set_voltage_unlocked(rdev->supply,
                                best_supply_uV, INT_MAX);
                if (ret) {
                        dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n",
                                        ret);
                        goto out2;
                }
        }

        ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
        if (ret < 0)
                goto out2;

        if (supply_change_uV < 0) {
                ret = regulator_set_voltage_unlocked(rdev->supply,
                                best_supply_uV, INT_MAX);
                if (ret)
                        dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n",
                                        ret);
                /* No need to fail here */
                ret = 0;
        }

out:
        return ret;
out2:
        regulator->min_uV = old_min_uV;
        regulator->max_uV = old_max_uV;

        return ret;
}

/**
 * regulator_set_voltage - set regulator output voltage
 * @regulator: regulator source
 * @min_uV: Minimum required voltage in uV
 * @max_uV: Maximum acceptable voltage in uV
 *
 * Sets a voltage regulator to the desired output voltage. This can be set
 * during any regulator state. IOW, regulator can be disabled or enabled.
 *
 * If the regulator is enabled then the voltage will change to the new value
 * immediately otherwise if the regulator is disabled the regulator will
 * output at the new voltage when enabled.
 *
 * NOTE: If the regulator is shared between several devices then the lowest
 * request voltage that meets the system constraints will be used.
 * Regulator system constraints must be set for this regulator before
 * calling this function otherwise this call will fail.
 */
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
{
        int ret = 0;

        regulator_lock_supply(regulator->rdev);

        ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV);

        regulator_unlock_supply(regulator->rdev);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_voltage);

/**
 * regulator_set_voltage_time - get raise/fall time
 * @regulator: regulator source
 * @old_uV: starting voltage in microvolts
 * @new_uV: target voltage in microvolts
 *
 * Provided with the starting and ending voltage, this function attempts to
 * calculate the time in microseconds required to rise or fall to this new
 * voltage.
 */
int regulator_set_voltage_time(struct regulator *regulator,
                               int old_uV, int new_uV)
{
        struct regulator_dev *rdev = regulator->rdev;
        const struct regulator_ops *ops = rdev->desc->ops;
        int old_sel = -1;
        int new_sel = -1;
        int voltage;
        int i;

        /* Currently requires operations to do this */
        if (!ops->list_voltage || !ops->set_voltage_time_sel
            || !rdev->desc->n_voltages)
                return -EINVAL;

        for (i = 0; i < rdev->desc->n_voltages; i++) {
                /* We only look for exact voltage matches here */
                voltage = regulator_list_voltage(regulator, i);
                if (voltage < 0)
                        return -EINVAL;
                if (voltage == 0)
                        continue;
                if (voltage == old_uV)
                        old_sel = i;
                if (voltage == new_uV)
                        new_sel = i;
        }

        if (old_sel < 0 || new_sel < 0)
                return -EINVAL;

        return ops->set_voltage_time_sel(rdev, old_sel, new_sel);
}
EXPORT_SYMBOL_GPL(regulator_set_voltage_time);

/**
 * regulator_set_voltage_time_sel - get raise/fall time
 * @rdev: regulator source device
 * @old_selector: selector for starting voltage
 * @new_selector: selector for target voltage
 *
 * Provided with the starting and target voltage selectors, this function
 * returns time in microseconds required to rise or fall to this new voltage
 *
 * Drivers providing ramp_delay in regulation_constraints can use this as their
 * set_voltage_time_sel() operation.
 */
int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
                                   unsigned int old_selector,
                                   unsigned int new_selector)
{
        unsigned int ramp_delay = 0;
        int old_volt, new_volt;

        if (rdev->constraints->ramp_delay)
                ramp_delay = rdev->constraints->ramp_delay;
        else if (rdev->desc->ramp_delay)
                ramp_delay = rdev->desc->ramp_delay;

        if (ramp_delay == 0) {
                rdev_warn(rdev, "ramp_delay not set\n");
                return 0;
        }

        /* sanity check */
        if (!rdev->desc->ops->list_voltage)
                return -EINVAL;

        old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
        new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);

        return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
}
EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);

/**
 * regulator_sync_voltage - re-apply last regulator output voltage
 * @regulator: regulator source
 *
 * Re-apply the last configured voltage.  This is intended to be used
 * where some external control source the consumer is cooperating with
 * has caused the configured voltage to change.
 */
int regulator_sync_voltage(struct regulator *regulator)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret, min_uV, max_uV;

        mutex_lock(&rdev->mutex);

        if (!rdev->desc->ops->set_voltage &&
            !rdev->desc->ops->set_voltage_sel) {
                ret = -EINVAL;
                goto out;
        }

        /* This is only going to work if we've had a voltage configured. */
        if (!regulator->min_uV && !regulator->max_uV) {
                ret = -EINVAL;
                goto out;
        }

        min_uV = regulator->min_uV;
        max_uV = regulator->max_uV;

        /* This should be a paranoia check... */
        ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
        if (ret < 0)
                goto out;

        ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
        if (ret < 0)
                goto out;

        ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);

out:
        mutex_unlock(&rdev->mutex);
        return ret;
}
EXPORT_SYMBOL_GPL(regulator_sync_voltage);

static int _regulator_get_voltage(struct regulator_dev *rdev)
{
        int sel, ret;
        bool bypassed;

        if (rdev->desc->ops->get_bypass) {
                ret = rdev->desc->ops->get_bypass(rdev, &bypassed);
                if (ret < 0)
                        return ret;
                if (bypassed) {
                        /* if bypassed the regulator must have a supply */
                        if (!rdev->supply) {
                                rdev_err(rdev,
                                         "bypassed regulator has no supply!\n");
                                return -EPROBE_DEFER;
                        }

                        return _regulator_get_voltage(rdev->supply->rdev);
                }
        }

        if (rdev->desc->ops->get_voltage_sel) {
                sel = rdev->desc->ops->get_voltage_sel(rdev);
                if (sel < 0)
                        return sel;
                ret = rdev->desc->ops->list_voltage(rdev, sel);
        } else if (rdev->desc->ops->get_voltage) {
                ret = rdev->desc->ops->get_voltage(rdev);
        } else if (rdev->desc->ops->list_voltage) {
                ret = rdev->desc->ops->list_voltage(rdev, 0);
        } else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) {
                ret = rdev->desc->fixed_uV;
        } else if (rdev->supply) {
                ret = _regulator_get_voltage(rdev->supply->rdev);
        } else {
                return -EINVAL;
        }

        if (ret < 0)
                return ret;
        return ret - rdev->constraints->uV_offset;
}

/**
 * regulator_get_voltage - get regulator output voltage
 * @regulator: regulator source
 *
 * This returns the current regulator voltage in uV.
 *
 * NOTE: If the regulator is disabled it will return the voltage value. This
 * function should not be used to determine regulator state.
 */
int regulator_get_voltage(struct regulator *regulator)
{
        int ret;

        regulator_lock_supply(regulator->rdev);

        ret = _regulator_get_voltage(regulator->rdev);

        regulator_unlock_supply(regulator->rdev);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_get_voltage);

/**
 * regulator_set_current_limit - set regulator output current limit
 * @regulator: regulator source
 * @min_uA: Minimum supported current in uA
 * @max_uA: Maximum supported current in uA
 *
 * Sets current sink to the desired output current. This can be set during
 * any regulator state. IOW, regulator can be disabled or enabled.
 *
 * If the regulator is enabled then the current will change to the new value
 * immediately otherwise if the regulator is disabled the regulator will
 * output at the new current when enabled.
 *
 * NOTE: Regulator system constraints must be set for this regulator before
 * calling this function otherwise this call will fail.
 */
int regulator_set_current_limit(struct regulator *regulator,
                               int min_uA, int max_uA)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret;

        mutex_lock(&rdev->mutex);

        /* sanity check */
        if (!rdev->desc->ops->set_current_limit) {
                ret = -EINVAL;
                goto out;
        }

        /* constraints check */
        ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
        if (ret < 0)
                goto out;

        ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
out:
        mutex_unlock(&rdev->mutex);
        return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_current_limit);

static int _regulator_get_current_limit(struct regulator_dev *rdev)
{
        int ret;

        mutex_lock(&rdev->mutex);

        /* sanity check */
        if (!rdev->desc->ops->get_current_limit) {
                ret = -EINVAL;
                goto out;
        }

        ret = rdev->desc->ops->get_current_limit(rdev);
out:
        mutex_unlock(&rdev->mutex);
        return ret;
}

/**
 * regulator_get_current_limit - get regulator output current
 * @regulator: regulator source
 *
 * This returns the current supplied by the specified current sink in uA.
 *
 * NOTE: If the regulator is disabled it will return the current value. This
 * function should not be used to determine regulator state.
 */
int regulator_get_current_limit(struct regulator *regulator)
{
        return _regulator_get_current_limit(regulator->rdev);
}
EXPORT_SYMBOL_GPL(regulator_get_current_limit);

/**
 * regulator_set_mode - set regulator operating mode
 * @regulator: regulator source
 * @mode: operating mode - one of the REGULATOR_MODE constants
 *
 * Set regulator operating mode to increase regulator efficiency or improve
 * regulation performance.
 *
 * NOTE: Regulator system constraints must be set for this regulator before
 * calling this function otherwise this call will fail.
 */
int regulator_set_mode(struct regulator *regulator, unsigned int mode)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret;
        int regulator_curr_mode;

        mutex_lock(&rdev->mutex);

        /* sanity check */
        if (!rdev->desc->ops->set_mode) {
                ret = -EINVAL;
                goto out;
        }

        /* return if the same mode is requested */
        if (rdev->desc->ops->get_mode) {
                regulator_curr_mode = rdev->desc->ops->get_mode(rdev);
                if (regulator_curr_mode == mode) {
                        ret = 0;
                        goto out;
                }
        }

        /* constraints check */
        ret = regulator_mode_constrain(rdev, &mode);
        if (ret < 0)
                goto out;

        ret = rdev->desc->ops->set_mode(rdev, mode);
out:
        mutex_unlock(&rdev->mutex);
        return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_mode);

static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
{
        int ret;

        mutex_lock(&rdev->mutex);

        /* sanity check */
        if (!rdev->desc->ops->get_mode) {
                ret = -EINVAL;
                goto out;
        }

        ret = rdev->desc->ops->get_mode(rdev);
out:
        mutex_unlock(&rdev->mutex);
        return ret;
}

/**
 * regulator_get_mode - get regulator operating mode
 * @regulator: regulator source
 *
 * Get the current regulator operating mode.
 */
unsigned int regulator_get_mode(struct regulator *regulator)
{
        return _regulator_get_mode(regulator->rdev);
}
EXPORT_SYMBOL_GPL(regulator_get_mode);

/**
 * regulator_set_load - set regulator load
 * @regulator: regulator source
 * @uA_load: load current
 *
 * Notifies the regulator core of a new device load. This is then used by
 * DRMS (if enabled by constraints) to set the most efficient regulator
 * operating mode for the new regulator loading.
 *
 * Consumer devices notify their supply regulator of the maximum power
 * they will require (can be taken from device datasheet in the power
 * consumption tables) when they change operational status and hence power
 * state. Examples of operational state changes that can affect power
 * consumption are :-
 *
 *    o Device is opened / closed.
 *    o Device I/O is about to begin or has just finished.
 *    o Device is idling in between work.
 *
 * This information is also exported via sysfs to userspace.
 *
 * DRMS will sum the total requested load on the regulator and change
 * to the most efficient operating mode if platform constraints allow.
 *
 * On error a negative errno is returned.
 */
int regulator_set_load(struct regulator *regulator, int uA_load)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret;

        mutex_lock(&rdev->mutex);
        regulator->uA_load = uA_load;
        ret = drms_uA_update(rdev);
        mutex_unlock(&rdev->mutex);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_load);

/**
 * regulator_allow_bypass - allow the regulator to go into bypass mode
 *
 * @regulator: Regulator to configure
 * @enable: enable or disable bypass mode
 *
 * Allow the regulator to go into bypass mode if all other consumers
 * for the regulator also enable bypass mode and the machine
 * constraints allow this.  Bypass mode means that the regulator is
 * simply passing the input directly to the output with no regulation.
 */
int regulator_allow_bypass(struct regulator *regulator, bool enable)
{
        struct regulator_dev *rdev = regulator->rdev;
        int ret = 0;

        if (!rdev->desc->ops->set_bypass)
                return 0;

        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_BYPASS))
                return 0;

        mutex_lock(&rdev->mutex);

        if (enable && !regulator->bypass) {
                rdev->bypass_count++;

                if (rdev->bypass_count == rdev->open_count) {
                        ret = rdev->desc->ops->set_bypass(rdev, enable);
                        if (ret != 0)
                                rdev->bypass_count--;
                }

        } else if (!enable && regulator->bypass) {
                rdev->bypass_count--;

                if (rdev->bypass_count != rdev->open_count) {
                        ret = rdev->desc->ops->set_bypass(rdev, enable);
                        if (ret != 0)
                                rdev->bypass_count++;
                }
        }

        if (ret == 0)
                regulator->bypass = enable;

        mutex_unlock(&rdev->mutex);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_allow_bypass);

/**
 * regulator_register_notifier - register regulator event notifier
 * @regulator: regulator source
 * @nb: notifier block
 *
 * Register notifier block to receive regulator events.
 */
int regulator_register_notifier(struct regulator *regulator,
                              struct notifier_block *nb)
{
        return blocking_notifier_chain_register(&regulator->rdev->notifier,
                                                nb);
}
EXPORT_SYMBOL_GPL(regulator_register_notifier);

/**
 * regulator_unregister_notifier - unregister regulator event notifier
 * @regulator: regulator source
 * @nb: notifier block
 *
 * Unregister regulator event notifier block.
 */
int regulator_unregister_notifier(struct regulator *regulator,
                                struct notifier_block *nb)
{
        return blocking_notifier_chain_unregister(&regulator->rdev->notifier,
                                                  nb);
}
EXPORT_SYMBOL_GPL(regulator_unregister_notifier);

/* notify regulator consumers and downstream regulator consumers.
 * Note mutex must be held by caller.
 */
static int _notifier_call_chain(struct regulator_dev *rdev,
                                  unsigned long event, void *data)
{
        /* call rdev chain first */
        return blocking_notifier_call_chain(&rdev->notifier, event, data);
}

/**
 * regulator_bulk_get - get multiple regulator consumers
 *
 * @dev:           Device to supply
 * @num_consumers: Number of consumers to register
 * @consumers:     Configuration of consumers; clients are stored here.
 *
 * @return 0 on success, an errno on failure.
 *
 * This helper function allows drivers to get several regulator
 * consumers in one operation.  If any of the regulators cannot be
 * acquired then any regulators that were allocated will be freed
 * before returning to the caller.
 */
int regulator_bulk_get(struct device *dev, int num_consumers,
                       struct regulator_bulk_data *consumers)
{
        int i;
        int ret;

        for (i = 0; i < num_consumers; i++)
                consumers[i].consumer = NULL;

        for (i = 0; i < num_consumers; i++) {
                consumers[i].consumer = _regulator_get(dev,
                                                       consumers[i].supply,
                                                       false,
                                                       !consumers[i].optional);
                if (IS_ERR(consumers[i].consumer)) {
                        ret = PTR_ERR(consumers[i].consumer);
                        dev_err(dev, "Failed to get supply '%s': %d\n",
                                consumers[i].supply, ret);
                        consumers[i].consumer = NULL;
                        goto err;
                }
        }

        return 0;

err:
        while (--i >= 0)
                regulator_put(consumers[i].consumer);

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_bulk_get);

static void regulator_bulk_enable_async(void *data, async_cookie_t cookie)
{
        struct regulator_bulk_data *bulk = data;

        bulk->ret = regulator_enable(bulk->consumer);
}

/**
 * regulator_bulk_enable - enable multiple regulator consumers
 *
 * @num_consumers: Number of consumers
 * @consumers:     Consumer data; clients are stored here.
 * @return         0 on success, an errno on failure
 *
 * This convenience API allows consumers to enable multiple regulator
 * clients in a single API call.  If any consumers cannot be enabled
 * then any others that were enabled will be disabled again prior to
 * return.
 */
int regulator_bulk_enable(int num_consumers,
                          struct regulator_bulk_data *consumers)
{
        ASYNC_DOMAIN_EXCLUSIVE(async_domain);
        int i;
        int ret = 0;

        for (i = 0; i < num_consumers; i++) {
                if (consumers[i].consumer->always_on)
                        consumers[i].ret = 0;
                else
                        async_schedule_domain(regulator_bulk_enable_async,
                                              &consumers[i], &async_domain);
        }

        async_synchronize_full_domain(&async_domain);

        /* If any consumer failed we need to unwind any that succeeded */
        for (i = 0; i < num_consumers; i++) {
                if (consumers[i].ret != 0) {
                        ret = consumers[i].ret;
                        goto err;
                }
        }

        return 0;

err:
        for (i = 0; i < num_consumers; i++) {
                if (consumers[i].ret < 0)
                        pr_err("Failed to enable %s: %d\n", consumers[i].supply,
                               consumers[i].ret);
                else
                        regulator_disable(consumers[i].consumer);
        }

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_bulk_enable);

/**
 * regulator_bulk_disable - disable multiple regulator consumers
 *
 * @num_consumers: Number of consumers
 * @consumers:     Consumer data; clients are stored here.
 * @return         0 on success, an errno on failure
 *
 * This convenience API allows consumers to disable multiple regulator
 * clients in a single API call.  If any consumers cannot be disabled
 * then any others that were disabled will be enabled again prior to
 * return.
 */
int regulator_bulk_disable(int num_consumers,
                           struct regulator_bulk_data *consumers)
{
        int i;
        int ret, r;

        for (i = num_consumers - 1; i >= 0; --i) {
                ret = regulator_disable(consumers[i].consumer);
                if (ret != 0)
                        goto err;
        }

        return 0;

err:
        pr_err("Failed to disable %s: %d\n", consumers[i].supply, ret);
        for (++i; i < num_consumers; ++i) {
                r = regulator_enable(consumers[i].consumer);
                if (r != 0)
                        pr_err("Failed to reename %s: %d\n",
                               consumers[i].supply, r);
        }

        return ret;
}
EXPORT_SYMBOL_GPL(regulator_bulk_disable);

/**
 * regulator_bulk_force_disable - force disable multiple regulator consumers
 *
 * @num_consumers: Number of consumers
 * @consumers:     Consumer data; clients are stored here.
 * @return         0 on success, an errno on failure
 *
 * This convenience API allows consumers to forcibly disable multiple regulator
 * clients in a single API call.
 * NOTE: This should be used for situations when device damage will
 * likely occur if the regulators are not disabled (e.g. over temp).
 * Although regulator_force_disable function call for some consumers can
 * return error numbers, the function is called for all consumers.
 */
int regulator_bulk_force_disable(int num_consumers,
                           struct regulator_bulk_data *consumers)
{
        int i;
        int ret;

        for (i = 0; i < num_consumers; i++)
                consumers[i].ret =
                            regulator_force_disable(consumers[i].consumer);

        for (i = 0; i < num_consumers; i++) {
                if (consumers[i].ret != 0) {
                        ret = consumers[i].ret;
                        goto out;
                }
        }

        return 0;
out:
        return ret;
}
EXPORT_SYMBOL_GPL(regulator_bulk_force_disable);

/**
 * regulator_bulk_free - free multiple regulator consumers
 *
 * @num_consumers: Number of consumers
 * @consumers:     Consumer data; clients are stored here.
 *
 * This convenience API allows consumers to free multiple regulator
 * clients in a single API call.
 */
void regulator_bulk_free(int num_consumers,
                         struct regulator_bulk_data *consumers)
{
        int i;

        for (i = 0; i < num_consumers; i++) {
                regulator_put(consumers[i].consumer);
                consumers[i].consumer = NULL;
        }
}
EXPORT_SYMBOL_GPL(regulator_bulk_free);

/**
 * regulator_notifier_call_chain - call regulator event notifier
 * @rdev: regulator source
 * @event: notifier block
 * @data: callback-specific data.
 *
 * Called by regulator drivers to notify clients a regulator event has
 * occurred. We also notify regulator clients downstream.
 * Note lock must be held by caller.
 */
int regulator_notifier_call_chain(struct regulator_dev *rdev,
                                  unsigned long event, void *data)
{
        lockdep_assert_held_once(&rdev->mutex);

        _notifier_call_chain(rdev, event, data);
        return NOTIFY_DONE;

}
EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);

/**
 * regulator_mode_to_status - convert a regulator mode into a status
 *
 * @mode: Mode to convert
 *
 * Convert a regulator mode into a status.
 */
int regulator_mode_to_status(unsigned int mode)
{
        switch (mode) {
        case REGULATOR_MODE_FAST:
                return REGULATOR_STATUS_FAST;
        case REGULATOR_MODE_NORMAL:
                return REGULATOR_STATUS_NORMAL;
        case REGULATOR_MODE_IDLE:
                return REGULATOR_STATUS_IDLE;
        case REGULATOR_MODE_STANDBY:
                return REGULATOR_STATUS_STANDBY;
        default:
                return REGULATOR_STATUS_UNDEFINED;
        }
}
EXPORT_SYMBOL_GPL(regulator_mode_to_status);

static struct attribute *regulator_dev_attrs[] = {
        &dev_attr_name.attr,
        &dev_attr_num_users.attr,
        &dev_attr_type.attr,
        &dev_attr_microvolts.attr,
        &dev_attr_microamps.attr,
        &dev_attr_opmode.attr,
        &dev_attr_state.attr,
        &dev_attr_status.attr,
        &dev_attr_bypass.attr,
        &dev_attr_requested_microamps.attr,
        &dev_attr_min_microvolts.attr,
        &dev_attr_max_microvolts.attr,
        &dev_attr_min_microamps.attr,
        &dev_attr_max_microamps.attr,
        &dev_attr_suspend_standby_state.attr,
        &dev_attr_suspend_mem_state.attr,
        &dev_attr_suspend_disk_state.attr,
        &dev_attr_suspend_standby_microvolts.attr,
        &dev_attr_suspend_mem_microvolts.attr,
        &dev_attr_suspend_disk_microvolts.attr,
        &dev_attr_suspend_standby_mode.attr,
        &dev_attr_suspend_mem_mode.attr,
        &dev_attr_suspend_disk_mode.attr,
        NULL
};

/*
 * To avoid cluttering sysfs (and memory) with useless state, only
 * create attributes that can be meaningfully displayed.
 */
static umode_t regulator_attr_is_visible(struct kobject *kobj,
                                         struct attribute *attr, int idx)
{
        struct device *dev = kobj_to_dev(kobj);
        struct regulator_dev *rdev = dev_to_rdev(dev);
        const struct regulator_ops *ops = rdev->desc->ops;
        umode_t mode = attr->mode;

        /* these three are always present */
        if (attr == &dev_attr_name.attr ||
            attr == &dev_attr_num_users.attr ||
            attr == &dev_attr_type.attr)
                return mode;

        /* some attributes need specific methods to be displayed */
        if (attr == &dev_attr_microvolts.attr) {
                if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) ||
                    (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) ||
                    (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) ||
                    (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1))
                        return mode;
                return 0;
        }

        if (attr == &dev_attr_microamps.attr)
                return ops->get_current_limit ? mode : 0;

        if (attr == &dev_attr_opmode.attr)
                return ops->get_mode ? mode : 0;

        if (attr == &dev_attr_state.attr)
                return (rdev->ena_pin || ops->is_enabled) ? mode : 0;

        if (attr == &dev_attr_status.attr)
                return ops->get_status ? mode : 0;

        if (attr == &dev_attr_bypass.attr)
                return ops->get_bypass ? mode : 0;

        /* some attributes are type-specific */
        if (attr == &dev_attr_requested_microamps.attr)
                return rdev->desc->type == REGULATOR_CURRENT ? mode : 0;

        /* constraints need specific supporting methods */
        if (attr == &dev_attr_min_microvolts.attr ||
            attr == &dev_attr_max_microvolts.attr)
                return (ops->set_voltage || ops->set_voltage_sel) ? mode : 0;

        if (attr == &dev_attr_min_microamps.attr ||
            attr == &dev_attr_max_microamps.attr)
                return ops->set_current_limit ? mode : 0;

        if (attr == &dev_attr_suspend_standby_state.attr ||
            attr == &dev_attr_suspend_mem_state.attr ||
            attr == &dev_attr_suspend_disk_state.attr)
                return mode;

        if (attr == &dev_attr_suspend_standby_microvolts.attr ||
            attr == &dev_attr_suspend_mem_microvolts.attr ||
            attr == &dev_attr_suspend_disk_microvolts.attr)
                return ops->set_suspend_voltage ? mode : 0;

        if (attr == &dev_attr_suspend_standby_mode.attr ||
            attr == &dev_attr_suspend_mem_mode.attr ||
            attr == &dev_attr_suspend_disk_mode.attr)
                return ops->set_suspend_mode ? mode : 0;

        return mode;
}

static const struct attribute_group regulator_dev_group = {
        .attrs = regulator_dev_attrs,
        .is_visible = regulator_attr_is_visible,
};

static const struct attribute_group *regulator_dev_groups[] = {
        &regulator_dev_group,
        NULL
};

static void regulator_dev_release(struct device *dev)
{
        struct regulator_dev *rdev = dev_get_drvdata(dev);

        kfree(rdev->constraints);
        of_node_put(rdev->dev.of_node);
        kfree(rdev);
}

static struct class regulator_class = {
        .name = "regulator",
        .dev_release = regulator_dev_release,
        .dev_groups = regulator_dev_groups,
};

static void rdev_init_debugfs(struct regulator_dev *rdev)
{
        struct device *parent = rdev->dev.parent;
        const char *rname = rdev_get_name(rdev);
        char name[NAME_MAX];

        /* Avoid duplicate debugfs directory names */
        if (parent && rname == rdev->desc->name) {
                snprintf(name, sizeof(name), "%s-%s", dev_name(parent),
                         rname);
                rname = name;
        }

        rdev->debugfs = debugfs_create_dir(rname, debugfs_root);
        if (!rdev->debugfs) {
                rdev_warn(rdev, "Failed to create debugfs directory\n");
                return;
        }

        debugfs_create_u32("use_count", 0444, rdev->debugfs,
                           &rdev->use_count);
        debugfs_create_u32("open_count", 0444, rdev->debugfs,
                           &rdev->open_count);
        debugfs_create_u32("bypass_count", 0444, rdev->debugfs,
                           &rdev->bypass_count);
}

static int regulator_register_resolve_supply(struct device *dev, void *data)
{
        struct regulator_dev *rdev = dev_to_rdev(dev);

        if (regulator_resolve_supply(rdev))
                rdev_dbg(rdev, "unable to resolve supply\n");

        return 0;
}

/**
 * regulator_register - register regulator
 * @regulator_desc: regulator to register
 * @cfg: runtime configuration for regulator
 *
 * Called by regulator drivers to register a regulator.
 * Returns a valid pointer to struct regulator_dev on success
 * or an ERR_PTR() on error.
 */
struct regulator_dev *
regulator_register(const struct regulator_desc *regulator_desc,
                   const struct regulator_config *cfg)
{
        const struct regulation_constraints *constraints = NULL;
        const struct regulator_init_data *init_data;
        struct regulator_config *config = NULL;
        static atomic_t regulator_no = ATOMIC_INIT(-1);
        struct regulator_dev *rdev;
        struct device *dev;
        int ret, i;

        if (regulator_desc == NULL || cfg == NULL)
                return ERR_PTR(-EINVAL);

        dev = cfg->dev;
        WARN_ON(!dev);

        if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
                return ERR_PTR(-EINVAL);

        if (regulator_desc->type != REGULATOR_VOLTAGE &&
            regulator_desc->type != REGULATOR_CURRENT)
                return ERR_PTR(-EINVAL);

        /* Only one of each should be implemented */
        WARN_ON(regulator_desc->ops->get_voltage &&
                regulator_desc->ops->get_voltage_sel);
        WARN_ON(regulator_desc->ops->set_voltage &&
                regulator_desc->ops->set_voltage_sel);

        /* If we're using selectors we must implement list_voltage. */
        if (regulator_desc->ops->get_voltage_sel &&
            !regulator_desc->ops->list_voltage) {
                return ERR_PTR(-EINVAL);
        }
        if (regulator_desc->ops->set_voltage_sel &&
            !regulator_desc->ops->list_voltage) {
                return ERR_PTR(-EINVAL);
        }

        rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
        if (rdev == NULL)
                return ERR_PTR(-ENOMEM);

        /*
         * Duplicate the config so the driver could override it after
         * parsing init data.
         */
        config = kmemdup(cfg, sizeof(*cfg), GFP_KERNEL);
        if (config == NULL) {
                kfree(rdev);
                return ERR_PTR(-ENOMEM);
        }

        init_data = regulator_of_get_init_data(dev, regulator_desc, config,
                                               &rdev->dev.of_node);
        if (!init_data) {
                init_data = config->init_data;
                rdev->dev.of_node = of_node_get(config->of_node);
        }

        mutex_init(&rdev->mutex);
        rdev->reg_data = config->driver_data;
        rdev->owner = regulator_desc->owner;
        rdev->desc = regulator_desc;
        if (config->regmap)
                rdev->regmap = config->regmap;
        else if (dev_get_regmap(dev, NULL))
                rdev->regmap = dev_get_regmap(dev, NULL);
        else if (dev->parent)
                rdev->regmap = dev_get_regmap(dev->parent, NULL);
        INIT_LIST_HEAD(&rdev->consumer_list);
        INIT_LIST_HEAD(&rdev->list);
        BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
        INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work);

        /* preform any regulator specific init */
        if (init_data && init_data->regulator_init) {
                ret = init_data->regulator_init(rdev->reg_data);
                if (ret < 0)
                        goto clean;
        }

        if ((config->ena_gpio || config->ena_gpio_initialized) &&
            gpio_is_valid(config->ena_gpio)) {
                mutex_lock(&regulator_list_mutex);
                ret = regulator_ena_gpio_request(rdev, config);
                mutex_unlock(&regulator_list_mutex);
                if (ret != 0) {
                        rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
                                 config->ena_gpio, ret);
                        goto clean;
                }
        }

        /* register with sysfs */
        rdev->dev.class = &regulator_class;
        rdev->dev.parent = dev;
        dev_set_name(&rdev->dev, "regulator.%lu",
                    (unsigned long) atomic_inc_return(&regulator_no));

        /* set regulator constraints */
        if (init_data)
                constraints = &init_data->constraints;

        if (init_data && init_data->supply_regulator)
                rdev->supply_name = init_data->supply_regulator;
        else if (regulator_desc->supply_name)
                rdev->supply_name = regulator_desc->supply_name;

        /*
         * Attempt to resolve the regulator supply, if specified,
         * but don't return an error if we fail because we will try
         * to resolve it again later as more regulators are added.
         */
        if (regulator_resolve_supply(rdev))
                rdev_dbg(rdev, "unable to resolve supply\n");

        ret = set_machine_constraints(rdev, constraints);
        if (ret < 0)
                goto wash;

        /* add consumers devices */
        if (init_data) {
                mutex_lock(&regulator_list_mutex);
                for (i = 0; i < init_data->num_consumer_supplies; i++) {
                        ret = set_consumer_device_supply(rdev,
                                init_data->consumer_supplies[i].dev_name,
                                init_data->consumer_supplies[i].supply);
                        if (ret < 0) {
                                mutex_unlock(&regulator_list_mutex);
                                dev_err(dev, "Failed to set supply %s\n",
                                        init_data->consumer_supplies[i].supply);
                                goto unset_supplies;
                        }
                }
                mutex_unlock(&regulator_list_mutex);
        }

        ret = device_register(&rdev->dev);
        if (ret != 0) {
                put_device(&rdev->dev);
                goto unset_supplies;
        }

        dev_set_drvdata(&rdev->dev, rdev);
        rdev_init_debugfs(rdev);

        /* try to resolve regulators supply since a new one was registered */
        class_for_each_device(&regulator_class, NULL, NULL,
                              regulator_register_resolve_supply);
        kfree(config);
        return rdev;

unset_supplies:
        mutex_lock(&regulator_list_mutex);
        unset_regulator_supplies(rdev);
        mutex_unlock(&regulator_list_mutex);
wash:
        kfree(rdev->constraints);
        mutex_lock(&regulator_list_mutex);
        regulator_ena_gpio_free(rdev);
        mutex_unlock(&regulator_list_mutex);
clean:
        kfree(rdev);
        kfree(config);
        return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(regulator_register);

/**
 * regulator_unregister - unregister regulator
 * @rdev: regulator to unregister
 *
 * Called by regulator drivers to unregister a regulator.
 */
void regulator_unregister(struct regulator_dev *rdev)
{
        if (rdev == NULL)
                return;

        if (rdev->supply) {
                while (rdev->use_count--)
                        regulator_disable(rdev->supply);
                regulator_put(rdev->supply);
        }
        mutex_lock(&regulator_list_mutex);
        debugfs_remove_recursive(rdev->debugfs);
        flush_work(&rdev->disable_work.work);
        WARN_ON(rdev->open_count);
        unset_regulator_supplies(rdev);
        list_del(&rdev->list);
        regulator_ena_gpio_free(rdev);
        mutex_unlock(&regulator_list_mutex);
        device_unregister(&rdev->dev);
}
EXPORT_SYMBOL_GPL(regulator_unregister);

static int _regulator_suspend_prepare(struct device *dev, void *data)
{
        struct regulator_dev *rdev = dev_to_rdev(dev);
        const suspend_state_t *state = data;
        int ret;

        mutex_lock(&rdev->mutex);
        ret = suspend_prepare(rdev, *state);
        mutex_unlock(&rdev->mutex);

        return ret;
}

/**
 * regulator_suspend_prepare - prepare regulators for system wide suspend
 * @state: system suspend state
 *
 * Configure each regulator with it's suspend operating parameters for state.
 * This will usually be called by machine suspend code prior to supending.
 */
int regulator_suspend_prepare(suspend_state_t state)
{
        /* ON is handled by regulator active state */
        if (state == PM_SUSPEND_ON)
                return -EINVAL;

        return class_for_each_device(&regulator_class, NULL, &state,
                                     _regulator_suspend_prepare);
}
EXPORT_SYMBOL_GPL(regulator_suspend_prepare);

static int _regulator_suspend_finish(struct device *dev, void *data)
{
        struct regulator_dev *rdev = dev_to_rdev(dev);
        int ret;

        mutex_lock(&rdev->mutex);
        if (rdev->use_count > 0  || rdev->constraints->always_on) {
                if (!_regulator_is_enabled(rdev)) {
                        ret = _regulator_do_enable(rdev);
                        if (ret)
                                dev_err(dev,
                                        "Failed to resume regulator %d\n",
                                        ret);
                }
        } else {
                if (!have_full_constraints())
                        goto unlock;
                if (!_regulator_is_enabled(rdev))
                        goto unlock;

                ret = _regulator_do_disable(rdev);
                if (ret)
                        dev_err(dev, "Failed to suspend regulator %d\n", ret);
        }
unlock:
        mutex_unlock(&rdev->mutex);

        /* Keep processing regulators in spite of any errors */
        return 0;
}

/**
 * regulator_suspend_finish - resume regulators from system wide suspend
 *
 * Turn on regulators that might be turned off by regulator_suspend_prepare
 * and that should be turned on according to the regulators properties.
 */
int regulator_suspend_finish(void)
{
        return class_for_each_device(&regulator_class, NULL, NULL,
                                     _regulator_suspend_finish);
}
EXPORT_SYMBOL_GPL(regulator_suspend_finish);

/**
 * regulator_has_full_constraints - the system has fully specified constraints
 *
 * Calling this function will cause the regulator API to disable all
 * regulators which have a zero use count and don't have an always_on
 * constraint in a late_initcall.
 *
 * The intention is that this will become the default behaviour in a
 * future kernel release so users are encouraged to use this facility
 * now.
 */
void regulator_has_full_constraints(void)
{
        has_full_constraints = 1;
}
EXPORT_SYMBOL_GPL(regulator_has_full_constraints);

/**
 * rdev_get_drvdata - get rdev regulator driver data
 * @rdev: regulator
 *
 * Get rdev regulator driver private data. This call can be used in the
 * regulator driver context.
 */
void *rdev_get_drvdata(struct regulator_dev *rdev)
{
        return rdev->reg_data;
}
EXPORT_SYMBOL_GPL(rdev_get_drvdata);

/**
 * regulator_get_drvdata - get regulator driver data
 * @regulator: regulator
 *
 * Get regulator driver private data. This call can be used in the consumer
 * driver context when non API regulator specific functions need to be called.
 */
void *regulator_get_drvdata(struct regulator *regulator)
{
        return regulator->rdev->reg_data;
}
EXPORT_SYMBOL_GPL(regulator_get_drvdata);

/**
 * regulator_set_drvdata - set regulator driver data
 * @regulator: regulator
 * @data: data
 */
void regulator_set_drvdata(struct regulator *regulator, void *data)
{
        regulator->rdev->reg_data = data;
}
EXPORT_SYMBOL_GPL(regulator_set_drvdata);

/**
 * regulator_get_id - get regulator ID
 * @rdev: regulator
 */
int rdev_get_id(struct regulator_dev *rdev)
{
        return rdev->desc->id;
}
EXPORT_SYMBOL_GPL(rdev_get_id);

struct device *rdev_get_dev(struct regulator_dev *rdev)
{
        return &rdev->dev;
}
EXPORT_SYMBOL_GPL(rdev_get_dev);

void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
{
        return reg_init_data->driver_data;
}
EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);

#ifdef CONFIG_DEBUG_FS
static ssize_t supply_map_read_file(struct file *file, char __user *user_buf,
                                    size_t count, loff_t *ppos)
{
        char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
        ssize_t len, ret = 0;
        struct regulator_map *map;

        if (!buf)
                return -ENOMEM;

        list_for_each_entry(map, &regulator_map_list, list) {
                len = snprintf(buf + ret, PAGE_SIZE - ret,
                               "%s -> %s.%s\n",
                               rdev_get_name(map->regulator), map->dev_name,
                               map->supply);
                if (len >= 0)
                        ret += len;
                if (ret > PAGE_SIZE) {
                        ret = PAGE_SIZE;
                        break;
                }
        }

        ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);

        kfree(buf);

        return ret;
}
#endif

static const struct file_operations supply_map_fops = {
#ifdef CONFIG_DEBUG_FS
        .read = supply_map_read_file,
        .llseek = default_llseek,
#endif
};

#ifdef CONFIG_DEBUG_FS
struct summary_data {
        struct seq_file *s;
        struct regulator_dev *parent;
        int level;
};

static void regulator_summary_show_subtree(struct seq_file *s,
                                           struct regulator_dev *rdev,
                                           int level);

static int regulator_summary_show_children(struct device *dev, void *data)
{
        struct regulator_dev *rdev = dev_to_rdev(dev);
        struct summary_data *summary_data = data;

        if (rdev->supply && rdev->supply->rdev == summary_data->parent)
                regulator_summary_show_subtree(summary_data->s, rdev,
                                               summary_data->level + 1);

        return 0;
}

static void regulator_summary_show_subtree(struct seq_file *s,
                                           struct regulator_dev *rdev,
                                           int level)
{
        struct regulation_constraints *c;
        struct regulator *consumer;
        struct summary_data summary_data;

        if (!rdev)
                return;

        seq_printf(s, "%*s%-*s %3d %4d %6d ",
                   level * 3 + 1, "",
                   30 - level * 3, rdev_get_name(rdev),
                   rdev->use_count, rdev->open_count, rdev->bypass_count);

        seq_printf(s, "%5dmV ", _regulator_get_voltage(rdev) / 1000);
        seq_printf(s, "%5dmA ", _regulator_get_current_limit(rdev) / 1000);

        c = rdev->constraints;
        if (c) {
                switch (rdev->desc->type) {
                case REGULATOR_VOLTAGE:
                        seq_printf(s, "%5dmV %5dmV ",
                                   c->min_uV / 1000, c->max_uV / 1000);
                        break;
                case REGULATOR_CURRENT:
                        seq_printf(s, "%5dmA %5dmA ",
                                   c->min_uA / 1000, c->max_uA / 1000);
                        break;
                }
        }

        seq_puts(s, "\n");

        list_for_each_entry(consumer, &rdev->consumer_list, list) {
                if (consumer->dev->class == &regulator_class)
                        continue;

                seq_printf(s, "%*s%-*s ",
                           (level + 1) * 3 + 1, "",
                           30 - (level + 1) * 3, dev_name(consumer->dev));

                switch (rdev->desc->type) {
                case REGULATOR_VOLTAGE:
                        seq_printf(s, "%37dmV %5dmV",
                                   consumer->min_uV / 1000,
                                   consumer->max_uV / 1000);
                        break;
                case REGULATOR_CURRENT:
                        break;
                }

                seq_puts(s, "\n");
        }

        summary_data.s = s;
        summary_data.level = level;
        summary_data.parent = rdev;

        class_for_each_device(&regulator_class, NULL, &summary_data,
                              regulator_summary_show_children);
}

static int regulator_summary_show_roots(struct device *dev, void *data)
{
        struct regulator_dev *rdev = dev_to_rdev(dev);
        struct seq_file *s = data;

        if (!rdev->supply)
                regulator_summary_show_subtree(s, rdev, 0);

        return 0;
}

static int regulator_summary_show(struct seq_file *s, void *data)
{
        seq_puts(s, " regulator                      use open bypass voltage current     min     max\n");
        seq_puts(s, "-------------------------------------------------------------------------------\n");

        class_for_each_device(&regulator_class, NULL, s,
                              regulator_summary_show_roots);

        return 0;
}

static int regulator_summary_open(struct inode *inode, struct file *file)
{
        return single_open(file, regulator_summary_show, inode->i_private);
}
#endif

static const struct file_operations regulator_summary_fops = {
#ifdef CONFIG_DEBUG_FS
        .open           = regulator_summary_open,
        .read           = seq_read,
        .llseek         = seq_lseek,
        .release        = single_release,
#endif
};

static int __init regulator_init(void)
{
        int ret;

        ret = class_register(&regulator_class);

        debugfs_root = debugfs_create_dir("regulator", NULL);
        if (!debugfs_root)
                pr_warn("regulator: Failed to create debugfs directory\n");

        debugfs_create_file("supply_map", 0444, debugfs_root, NULL,
                            &supply_map_fops);

        debugfs_create_file("regulator_summary", 0444, debugfs_root,
                            NULL, &regulator_summary_fops);

        regulator_dummy_init();

        return ret;
}

/* init early to allow our consumers to complete system booting */
core_initcall(regulator_init);

static int __init regulator_late_cleanup(struct device *dev, void *data)
{
        struct regulator_dev *rdev = dev_to_rdev(dev);
        const struct regulator_ops *ops = rdev->desc->ops;
        struct regulation_constraints *c = rdev->constraints;
        int enabled, ret;

        if (c && c->always_on)
                return 0;

        if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS))
                return 0;

        mutex_lock(&rdev->mutex);

        if (rdev->use_count)
                goto unlock;

        /* If we can't read the status assume it's on. */
        if (ops->is_enabled)
                enabled = ops->is_enabled(rdev);
        else
                enabled = 1;

        if (!enabled)
                goto unlock;

        if (have_full_constraints()) {
                /* We log since this may kill the system if it goes
                 * wrong. */
                rdev_info(rdev, "disabling\n");
                ret = _regulator_do_disable(rdev);
                if (ret != 0)
                        rdev_err(rdev, "couldn't disable: %d\n", ret);
        } else {
                /* The intention is that in future we will
                 * assume that full constraints are provided
                 * so warn even if we aren't going to do
                 * anything here.
                 */
                rdev_warn(rdev, "incomplete constraints, leaving on\n");
        }

unlock:
        mutex_unlock(&rdev->mutex);

        return 0;
}

static int __init regulator_init_complete(void)
{
        /*
         * Since DT doesn't provide an idiomatic mechanism for
         * enabling full constraints and since it's much more natural
         * with DT to provide them just assume that a DT enabled
         * system has full constraints.
         */
        if (of_have_populated_dt())
                has_full_constraints = true;

        /* If we have a full configuration then disable any regulators
         * we have permission to change the status for and which are
         * not in use or always_on.  This is effectively the default
         * for DT and ACPI as they have full constraints.
         */
        class_for_each_device(&regulator_class, NULL, NULL,
                              regulator_late_cleanup);

        return 0;
}
late_initcall_sync(regulator_init_complete);