1 // SPDX-License-Identifier: GPL-2.0+
3 // max77686.c - Regulator driver for the Maxim 77686
5 // Copyright (C) 2012 Samsung Electronics
6 // Chiwoong Byun <woong.byun@samsung.com>
7 // Jonghwa Lee <jonghwa3.lee@samsung.com>
9 // This driver is based on max8997.c
11 #include <linux/kernel.h>
12 #include <linux/bug.h>
13 #include <linux/err.h>
14 #include <linux/gpio.h>
15 #include <linux/of_gpio.h>
16 #include <linux/slab.h>
17 #include <linux/platform_device.h>
18 #include <linux/regulator/driver.h>
19 #include <linux/regulator/machine.h>
20 #include <linux/regulator/of_regulator.h>
21 #include <linux/mfd/max77686.h>
22 #include <linux/mfd/max77686-private.h>
24 #define MAX77686_LDO_MINUV 800000
25 #define MAX77686_LDO_UVSTEP 50000
26 #define MAX77686_LDO_LOW_MINUV 800000
27 #define MAX77686_LDO_LOW_UVSTEP 25000
28 #define MAX77686_BUCK_MINUV 750000
29 #define MAX77686_BUCK_UVSTEP 50000
30 #define MAX77686_BUCK_ENABLE_TIME 40 /* us */
31 #define MAX77686_DVS_ENABLE_TIME 22 /* us */
32 #define MAX77686_RAMP_DELAY 100000 /* uV/us */
33 #define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */
34 #define MAX77686_DVS_MINUV 600000
35 #define MAX77686_DVS_UVSTEP 12500
38 * Value for configuring buck[89] and LDO{20,21,22} as GPIO control.
39 * It is the same as 'off' for other regulators.
41 #define MAX77686_GPIO_CONTROL 0x0
43 * Values used for configuring LDOs and bucks.
44 * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
46 #define MAX77686_LDO_LOWPOWER 0x1
48 * On/off controlled by PWRREQ:
49 * - LDO2, 6-8, 10-12, 14-16
52 #define MAX77686_OFF_PWRREQ 0x1
53 /* Low power mode controlled by PWRREQ: All LDOs */
54 #define MAX77686_LDO_LOWPOWER_PWRREQ 0x2
55 /* Forcing low power mode: buck[234] */
56 #define MAX77686_BUCK_LOWPOWER 0x2
57 #define MAX77686_NORMAL 0x3
59 #define MAX77686_OPMODE_SHIFT 6
60 #define MAX77686_OPMODE_BUCK234_SHIFT 4
61 #define MAX77686_OPMODE_MASK 0x3
63 #define MAX77686_VSEL_MASK 0x3F
64 #define MAX77686_DVS_VSEL_MASK 0xFF
66 #define MAX77686_RAMP_RATE_MASK 0xC0
68 #define MAX77686_REGULATORS MAX77686_REG_MAX
69 #define MAX77686_LDOS 26
71 enum max77686_ramp_rate
{
75 RAMP_RATE_NO_CTRL
, /* 100mV/us */
78 struct max77686_data
{
79 DECLARE_BITMAP(gpio_enabled
, MAX77686_REGULATORS
);
81 /* Array indexed by regulator id */
82 unsigned int opmode
[MAX77686_REGULATORS
];
85 static unsigned int max77686_get_opmode_shift(int id
)
89 case MAX77686_BUCK5
... MAX77686_BUCK9
:
91 case MAX77686_BUCK2
... MAX77686_BUCK4
:
92 return MAX77686_OPMODE_BUCK234_SHIFT
;
95 return MAX77686_OPMODE_SHIFT
;
100 * When regulator is configured for GPIO control then it
101 * replaces "normal" mode. Any change from low power mode to normal
102 * should actually change to GPIO control.
103 * Map normal mode to proper value for such regulators.
105 static unsigned int max77686_map_normal_mode(struct max77686_data
*max77686
,
111 case MAX77686_LDO20
... MAX77686_LDO22
:
112 if (test_bit(id
, max77686
->gpio_enabled
))
113 return MAX77686_GPIO_CONTROL
;
116 return MAX77686_NORMAL
;
119 /* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
120 static int max77686_set_suspend_disable(struct regulator_dev
*rdev
)
122 unsigned int val
, shift
;
123 struct max77686_data
*max77686
= rdev_get_drvdata(rdev
);
124 int ret
, id
= rdev_get_id(rdev
);
126 shift
= max77686_get_opmode_shift(id
);
127 val
= MAX77686_OFF_PWRREQ
;
129 ret
= regmap_update_bits(rdev
->regmap
, rdev
->desc
->enable_reg
,
130 rdev
->desc
->enable_mask
, val
<< shift
);
134 max77686
->opmode
[id
] = val
;
138 /* Some LDOs supports [LPM/Normal]ON mode during suspend state */
139 static int max77686_set_suspend_mode(struct regulator_dev
*rdev
,
142 struct max77686_data
*max77686
= rdev_get_drvdata(rdev
);
144 int ret
, id
= rdev_get_id(rdev
);
146 /* BUCK[5-9] doesn't support this feature */
147 if (id
>= MAX77686_BUCK5
)
151 case REGULATOR_MODE_IDLE
: /* ON in LP Mode */
152 val
= MAX77686_LDO_LOWPOWER_PWRREQ
;
154 case REGULATOR_MODE_NORMAL
: /* ON in Normal Mode */
155 val
= max77686_map_normal_mode(max77686
, id
);
158 pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
159 rdev
->desc
->name
, mode
);
163 ret
= regmap_update_bits(rdev
->regmap
, rdev
->desc
->enable_reg
,
164 rdev
->desc
->enable_mask
,
165 val
<< MAX77686_OPMODE_SHIFT
);
169 max77686
->opmode
[id
] = val
;
173 /* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */
174 static int max77686_ldo_set_suspend_mode(struct regulator_dev
*rdev
,
178 struct max77686_data
*max77686
= rdev_get_drvdata(rdev
);
179 int ret
, id
= rdev_get_id(rdev
);
182 case REGULATOR_MODE_STANDBY
: /* switch off */
183 val
= MAX77686_OFF_PWRREQ
;
185 case REGULATOR_MODE_IDLE
: /* ON in LP Mode */
186 val
= MAX77686_LDO_LOWPOWER_PWRREQ
;
188 case REGULATOR_MODE_NORMAL
: /* ON in Normal Mode */
189 val
= max77686_map_normal_mode(max77686
, id
);
192 pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
193 rdev
->desc
->name
, mode
);
197 ret
= regmap_update_bits(rdev
->regmap
, rdev
->desc
->enable_reg
,
198 rdev
->desc
->enable_mask
,
199 val
<< MAX77686_OPMODE_SHIFT
);
203 max77686
->opmode
[id
] = val
;
207 static int max77686_enable(struct regulator_dev
*rdev
)
209 struct max77686_data
*max77686
= rdev_get_drvdata(rdev
);
211 int id
= rdev_get_id(rdev
);
213 shift
= max77686_get_opmode_shift(id
);
215 if (max77686
->opmode
[id
] == MAX77686_OFF_PWRREQ
)
216 max77686
->opmode
[id
] = max77686_map_normal_mode(max77686
, id
);
218 return regmap_update_bits(rdev
->regmap
, rdev
->desc
->enable_reg
,
219 rdev
->desc
->enable_mask
,
220 max77686
->opmode
[id
] << shift
);
223 static int max77686_set_ramp_delay(struct regulator_dev
*rdev
, int ramp_delay
)
225 unsigned int ramp_value
= RAMP_RATE_NO_CTRL
;
227 switch (ramp_delay
) {
229 ramp_value
= RAMP_RATE_13P75MV
;
231 case 13751 ... 27500:
232 ramp_value
= RAMP_RATE_27P5MV
;
234 case 27501 ... 55000:
235 ramp_value
= RAMP_RATE_55MV
;
237 case 55001 ... 100000:
240 pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
241 rdev
->desc
->name
, ramp_delay
);
244 return regmap_update_bits(rdev
->regmap
, rdev
->desc
->enable_reg
,
245 MAX77686_RAMP_RATE_MASK
, ramp_value
<< 6);
248 static int max77686_of_parse_cb(struct device_node
*np
,
249 const struct regulator_desc
*desc
,
250 struct regulator_config
*config
)
252 struct max77686_data
*max77686
= config
->driver_data
;
257 case MAX77686_LDO20
... MAX77686_LDO22
:
258 config
->ena_gpio
= of_get_named_gpio(np
,
259 "maxim,ena-gpios", 0);
260 config
->ena_gpio_flags
= GPIOF_OUT_INIT_HIGH
;
261 config
->ena_gpio_initialized
= true;
267 if (gpio_is_valid(config
->ena_gpio
)) {
268 set_bit(desc
->id
, max77686
->gpio_enabled
);
270 return regmap_update_bits(config
->regmap
, desc
->enable_reg
,
272 MAX77686_GPIO_CONTROL
);
278 static const struct regulator_ops max77686_ops
= {
279 .list_voltage
= regulator_list_voltage_linear
,
280 .map_voltage
= regulator_map_voltage_linear
,
281 .is_enabled
= regulator_is_enabled_regmap
,
282 .enable
= max77686_enable
,
283 .disable
= regulator_disable_regmap
,
284 .get_voltage_sel
= regulator_get_voltage_sel_regmap
,
285 .set_voltage_sel
= regulator_set_voltage_sel_regmap
,
286 .set_voltage_time_sel
= regulator_set_voltage_time_sel
,
287 .set_suspend_mode
= max77686_set_suspend_mode
,
290 static const struct regulator_ops max77686_ldo_ops
= {
291 .list_voltage
= regulator_list_voltage_linear
,
292 .map_voltage
= regulator_map_voltage_linear
,
293 .is_enabled
= regulator_is_enabled_regmap
,
294 .enable
= max77686_enable
,
295 .disable
= regulator_disable_regmap
,
296 .get_voltage_sel
= regulator_get_voltage_sel_regmap
,
297 .set_voltage_sel
= regulator_set_voltage_sel_regmap
,
298 .set_voltage_time_sel
= regulator_set_voltage_time_sel
,
299 .set_suspend_mode
= max77686_ldo_set_suspend_mode
,
300 .set_suspend_disable
= max77686_set_suspend_disable
,
303 static const struct regulator_ops max77686_buck1_ops
= {
304 .list_voltage
= regulator_list_voltage_linear
,
305 .map_voltage
= regulator_map_voltage_linear
,
306 .is_enabled
= regulator_is_enabled_regmap
,
307 .enable
= max77686_enable
,
308 .disable
= regulator_disable_regmap
,
309 .get_voltage_sel
= regulator_get_voltage_sel_regmap
,
310 .set_voltage_sel
= regulator_set_voltage_sel_regmap
,
311 .set_voltage_time_sel
= regulator_set_voltage_time_sel
,
312 .set_suspend_disable
= max77686_set_suspend_disable
,
315 static const struct regulator_ops max77686_buck_dvs_ops
= {
316 .list_voltage
= regulator_list_voltage_linear
,
317 .map_voltage
= regulator_map_voltage_linear
,
318 .is_enabled
= regulator_is_enabled_regmap
,
319 .enable
= max77686_enable
,
320 .disable
= regulator_disable_regmap
,
321 .get_voltage_sel
= regulator_get_voltage_sel_regmap
,
322 .set_voltage_sel
= regulator_set_voltage_sel_regmap
,
323 .set_voltage_time_sel
= regulator_set_voltage_time_sel
,
324 .set_ramp_delay
= max77686_set_ramp_delay
,
325 .set_suspend_disable
= max77686_set_suspend_disable
,
328 #define regulator_desc_ldo(num) { \
330 .of_match = of_match_ptr("LDO"#num), \
331 .regulators_node = of_match_ptr("voltage-regulators"), \
332 .of_parse_cb = max77686_of_parse_cb, \
333 .id = MAX77686_LDO##num, \
334 .ops = &max77686_ops, \
335 .type = REGULATOR_VOLTAGE, \
336 .owner = THIS_MODULE, \
337 .min_uV = MAX77686_LDO_MINUV, \
338 .uV_step = MAX77686_LDO_UVSTEP, \
339 .ramp_delay = MAX77686_RAMP_DELAY, \
340 .n_voltages = MAX77686_VSEL_MASK + 1, \
341 .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
342 .vsel_mask = MAX77686_VSEL_MASK, \
343 .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
344 .enable_mask = MAX77686_OPMODE_MASK \
345 << MAX77686_OPMODE_SHIFT, \
347 #define regulator_desc_lpm_ldo(num) { \
349 .of_match = of_match_ptr("LDO"#num), \
350 .regulators_node = of_match_ptr("voltage-regulators"), \
351 .id = MAX77686_LDO##num, \
352 .ops = &max77686_ldo_ops, \
353 .type = REGULATOR_VOLTAGE, \
354 .owner = THIS_MODULE, \
355 .min_uV = MAX77686_LDO_MINUV, \
356 .uV_step = MAX77686_LDO_UVSTEP, \
357 .ramp_delay = MAX77686_RAMP_DELAY, \
358 .n_voltages = MAX77686_VSEL_MASK + 1, \
359 .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
360 .vsel_mask = MAX77686_VSEL_MASK, \
361 .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
362 .enable_mask = MAX77686_OPMODE_MASK \
363 << MAX77686_OPMODE_SHIFT, \
365 #define regulator_desc_ldo_low(num) { \
367 .of_match = of_match_ptr("LDO"#num), \
368 .regulators_node = of_match_ptr("voltage-regulators"), \
369 .id = MAX77686_LDO##num, \
370 .ops = &max77686_ldo_ops, \
371 .type = REGULATOR_VOLTAGE, \
372 .owner = THIS_MODULE, \
373 .min_uV = MAX77686_LDO_LOW_MINUV, \
374 .uV_step = MAX77686_LDO_LOW_UVSTEP, \
375 .ramp_delay = MAX77686_RAMP_DELAY, \
376 .n_voltages = MAX77686_VSEL_MASK + 1, \
377 .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
378 .vsel_mask = MAX77686_VSEL_MASK, \
379 .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
380 .enable_mask = MAX77686_OPMODE_MASK \
381 << MAX77686_OPMODE_SHIFT, \
383 #define regulator_desc_ldo1_low(num) { \
385 .of_match = of_match_ptr("LDO"#num), \
386 .regulators_node = of_match_ptr("voltage-regulators"), \
387 .id = MAX77686_LDO##num, \
388 .ops = &max77686_ops, \
389 .type = REGULATOR_VOLTAGE, \
390 .owner = THIS_MODULE, \
391 .min_uV = MAX77686_LDO_LOW_MINUV, \
392 .uV_step = MAX77686_LDO_LOW_UVSTEP, \
393 .ramp_delay = MAX77686_RAMP_DELAY, \
394 .n_voltages = MAX77686_VSEL_MASK + 1, \
395 .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
396 .vsel_mask = MAX77686_VSEL_MASK, \
397 .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
398 .enable_mask = MAX77686_OPMODE_MASK \
399 << MAX77686_OPMODE_SHIFT, \
401 #define regulator_desc_buck(num) { \
402 .name = "BUCK"#num, \
403 .of_match = of_match_ptr("BUCK"#num), \
404 .regulators_node = of_match_ptr("voltage-regulators"), \
405 .of_parse_cb = max77686_of_parse_cb, \
406 .id = MAX77686_BUCK##num, \
407 .ops = &max77686_ops, \
408 .type = REGULATOR_VOLTAGE, \
409 .owner = THIS_MODULE, \
410 .min_uV = MAX77686_BUCK_MINUV, \
411 .uV_step = MAX77686_BUCK_UVSTEP, \
412 .ramp_delay = MAX77686_RAMP_DELAY, \
413 .enable_time = MAX77686_BUCK_ENABLE_TIME, \
414 .n_voltages = MAX77686_VSEL_MASK + 1, \
415 .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
416 .vsel_mask = MAX77686_VSEL_MASK, \
417 .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
418 .enable_mask = MAX77686_OPMODE_MASK, \
420 #define regulator_desc_buck1(num) { \
421 .name = "BUCK"#num, \
422 .of_match = of_match_ptr("BUCK"#num), \
423 .regulators_node = of_match_ptr("voltage-regulators"), \
424 .id = MAX77686_BUCK##num, \
425 .ops = &max77686_buck1_ops, \
426 .type = REGULATOR_VOLTAGE, \
427 .owner = THIS_MODULE, \
428 .min_uV = MAX77686_BUCK_MINUV, \
429 .uV_step = MAX77686_BUCK_UVSTEP, \
430 .ramp_delay = MAX77686_RAMP_DELAY, \
431 .enable_time = MAX77686_BUCK_ENABLE_TIME, \
432 .n_voltages = MAX77686_VSEL_MASK + 1, \
433 .vsel_reg = MAX77686_REG_BUCK1OUT, \
434 .vsel_mask = MAX77686_VSEL_MASK, \
435 .enable_reg = MAX77686_REG_BUCK1CTRL, \
436 .enable_mask = MAX77686_OPMODE_MASK, \
438 #define regulator_desc_buck_dvs(num) { \
439 .name = "BUCK"#num, \
440 .of_match = of_match_ptr("BUCK"#num), \
441 .regulators_node = of_match_ptr("voltage-regulators"), \
442 .id = MAX77686_BUCK##num, \
443 .ops = &max77686_buck_dvs_ops, \
444 .type = REGULATOR_VOLTAGE, \
445 .owner = THIS_MODULE, \
446 .min_uV = MAX77686_DVS_MINUV, \
447 .uV_step = MAX77686_DVS_UVSTEP, \
448 .ramp_delay = MAX77686_DVS_RAMP_DELAY, \
449 .enable_time = MAX77686_DVS_ENABLE_TIME, \
450 .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
451 .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
452 .vsel_mask = MAX77686_DVS_VSEL_MASK, \
453 .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
454 .enable_mask = MAX77686_OPMODE_MASK \
455 << MAX77686_OPMODE_BUCK234_SHIFT, \
458 static const struct regulator_desc regulators
[] = {
459 regulator_desc_ldo1_low(1),
460 regulator_desc_ldo_low(2),
461 regulator_desc_ldo(3),
462 regulator_desc_ldo(4),
463 regulator_desc_ldo(5),
464 regulator_desc_ldo_low(6),
465 regulator_desc_ldo_low(7),
466 regulator_desc_ldo_low(8),
467 regulator_desc_ldo(9),
468 regulator_desc_lpm_ldo(10),
469 regulator_desc_lpm_ldo(11),
470 regulator_desc_lpm_ldo(12),
471 regulator_desc_ldo(13),
472 regulator_desc_lpm_ldo(14),
473 regulator_desc_ldo_low(15),
474 regulator_desc_lpm_ldo(16),
475 regulator_desc_ldo(17),
476 regulator_desc_ldo(18),
477 regulator_desc_ldo(19),
478 regulator_desc_ldo(20),
479 regulator_desc_ldo(21),
480 regulator_desc_ldo(22),
481 regulator_desc_ldo(23),
482 regulator_desc_ldo(24),
483 regulator_desc_ldo(25),
484 regulator_desc_ldo(26),
485 regulator_desc_buck1(1),
486 regulator_desc_buck_dvs(2),
487 regulator_desc_buck_dvs(3),
488 regulator_desc_buck_dvs(4),
489 regulator_desc_buck(5),
490 regulator_desc_buck(6),
491 regulator_desc_buck(7),
492 regulator_desc_buck(8),
493 regulator_desc_buck(9),
496 static int max77686_pmic_probe(struct platform_device
*pdev
)
498 struct max77686_dev
*iodev
= dev_get_drvdata(pdev
->dev
.parent
);
499 struct max77686_data
*max77686
;
501 struct regulator_config config
= { };
503 dev_dbg(&pdev
->dev
, "%s\n", __func__
);
505 max77686
= devm_kzalloc(&pdev
->dev
, sizeof(struct max77686_data
),
510 config
.dev
= iodev
->dev
;
511 config
.regmap
= iodev
->regmap
;
512 config
.driver_data
= max77686
;
513 platform_set_drvdata(pdev
, max77686
);
515 for (i
= 0; i
< MAX77686_REGULATORS
; i
++) {
516 struct regulator_dev
*rdev
;
517 int id
= regulators
[i
].id
;
519 max77686
->opmode
[id
] = MAX77686_NORMAL
;
520 rdev
= devm_regulator_register(&pdev
->dev
,
521 ®ulators
[i
], &config
);
523 int ret
= PTR_ERR(rdev
);
525 "regulator init failed for %d: %d\n", i
, ret
);
533 static const struct platform_device_id max77686_pmic_id
[] = {
534 {"max77686-pmic", 0},
537 MODULE_DEVICE_TABLE(platform
, max77686_pmic_id
);
539 static struct platform_driver max77686_pmic_driver
= {
541 .name
= "max77686-pmic",
543 .probe
= max77686_pmic_probe
,
544 .id_table
= max77686_pmic_id
,
547 module_platform_driver(max77686_pmic_driver
);
549 MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
550 MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
551 MODULE_LICENSE("GPL");