Linux 2.6.17.3
[linux/fpc-iii.git] / drivers / char / qtronix.c
blob601d09baf9d76b04812b1471c611335b20b18ad4
1 /*
3 * BRIEF MODULE DESCRIPTION
4 * Qtronix 990P infrared keyboard driver.
7 * Copyright 2001 MontaVista Software Inc.
8 * Author: MontaVista Software, Inc.
9 * ppopov@mvista.com or source@mvista.com
12 * The bottom portion of this driver was take from
13 * pc_keyb.c Please see that file for copyrights.
15 * This program is free software; you can redistribute it and/or modify it
16 * under the terms of the GNU General Public License as published by the
17 * Free Software Foundation; either version 2 of the License, or (at your
18 * option) any later version.
20 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
23 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
26 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
27 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 * You should have received a copy of the GNU General Public License along
32 * with this program; if not, write to the Free Software Foundation, Inc.,
33 * 675 Mass Ave, Cambridge, MA 02139, USA.
36 #include <linux/config.h>
38 /*
39 * NOTE:
41 * This driver has only been tested with the Consumer IR
42 * port of the ITE 8172 system controller.
44 * You do not need this driver if you are using the ps/2 or
45 * USB adapter that the keyboard ships with. You only need
46 * this driver if your board has a IR port and the keyboard
47 * data is being sent directly to the IR. In that case,
48 * you also need some low-level IR support. See it8172_cir.c.
52 #ifdef CONFIG_QTRONIX_KEYBOARD
54 #include <linux/module.h>
55 #include <linux/types.h>
56 #include <linux/pci.h>
57 #include <linux/kernel.h>
59 #include <asm/it8172/it8172.h>
60 #include <asm/it8172/it8172_int.h>
61 #include <asm/it8172/it8172_cir.h>
63 #include <linux/spinlock.h>
64 #include <linux/sched.h>
65 #include <linux/interrupt.h>
66 #include <linux/tty.h>
67 #include <linux/mm.h>
68 #include <linux/signal.h>
69 #include <linux/init.h>
70 #include <linux/kbd_ll.h>
71 #include <linux/delay.h>
72 #include <linux/poll.h>
73 #include <linux/miscdevice.h>
74 #include <linux/slab.h>
75 #include <linux/kbd_kern.h>
76 #include <linux/smp_lock.h>
77 #include <asm/io.h>
78 #include <linux/pc_keyb.h>
80 #include <asm/keyboard.h>
81 #include <linux/bitops.h>
82 #include <asm/uaccess.h>
83 #include <asm/irq.h>
84 #include <asm/system.h>
86 #define leading1 0
87 #define leading2 0xF
89 #define KBD_CIR_PORT 0
90 #define AUX_RECONNECT 170 /* scancode when ps2 device is plugged (back) in */
92 static int data_index;
93 struct cir_port *cir;
94 static unsigned char kbdbytes[5];
95 static unsigned char cir_data[32]; /* we only need 16 chars */
97 static void kbd_int_handler(int irq, void *dev_id, struct pt_regs *regs);
98 static int handle_data(unsigned char *p_data);
99 static inline void handle_mouse_event(unsigned char scancode);
100 static inline void handle_keyboard_event(unsigned char scancode, int down);
101 static int __init psaux_init(void);
103 static struct aux_queue *queue; /* Mouse data buffer. */
104 static int aux_count = 0;
107 * Keys accessed through the 'Fn' key
108 * The Fn key does not produce a key-up sequence. So, the first
109 * time the user presses it, it will be key-down event. The key
110 * stays down until the user presses it again.
112 #define NUM_FN_KEYS 56
113 static unsigned char fn_keys[NUM_FN_KEYS] = {
114 0,0,0,0,0,0,0,0, /* 0 7 */
115 8,9,10,93,0,0,0,0, /* 8 15 */
116 0,0,0,0,0,0,0,5, /* 16 23 */
117 6,7,91,0,0,0,0,0, /* 24 31 */
118 0,0,0,0,0,2,3,4, /* 32 39 */
119 92,0,0,0,0,0,0,0, /* 40 47 */
120 0,0,0,0,11,0,94,95 /* 48 55 */
124 void __init init_qtronix_990P_kbd(void)
126 int retval;
128 cir = (struct cir_port *)kmalloc(sizeof(struct cir_port), GFP_KERNEL);
129 if (!cir) {
130 printk("Unable to initialize Qtronix keyboard\n");
131 return;
135 * revisit
136 * this should be programmable, somehow by the, by the user.
138 cir->port = KBD_CIR_PORT;
139 cir->baud_rate = 0x1d;
140 cir->rdwos = 0;
141 cir->rxdcr = 0x3;
142 cir->hcfs = 0;
143 cir->fifo_tl = 0;
144 cir->cfq = 0x1d;
145 cir_port_init(cir);
147 retval = request_irq(IT8172_CIR0_IRQ, kbd_int_handler,
148 (unsigned long )(SA_INTERRUPT|SA_SHIRQ),
149 (const char *)"Qtronix IR Keyboard", (void *)cir);
151 if (retval) {
152 printk("unable to allocate cir %d irq %d\n",
153 cir->port, IT8172_CIR0_IRQ);
155 #ifdef CONFIG_PSMOUSE
156 psaux_init();
157 #endif
160 static inline unsigned char BitReverse(unsigned short key)
162 unsigned char rkey = 0;
163 rkey |= (key & 0x1) << 7;
164 rkey |= (key & 0x2) << 5;
165 rkey |= (key & 0x4) << 3;
166 rkey |= (key & 0x8) << 1;
167 rkey |= (key & 0x10) >> 1;
168 rkey |= (key & 0x20) >> 3;
169 rkey |= (key & 0x40) >> 5;
170 rkey |= (key & 0x80) >> 7;
171 return rkey;
176 static inline u_int8_t UpperByte(u_int8_t data)
178 return (data >> 4);
182 static inline u_int8_t LowerByte(u_int8_t data)
184 return (data & 0xF);
188 int CheckSumOk(u_int8_t byte1, u_int8_t byte2,
189 u_int8_t byte3, u_int8_t byte4, u_int8_t byte5)
191 u_int8_t CheckSum;
193 CheckSum = (byte1 & 0x0F) + byte2 + byte3 + byte4 + byte5;
194 if ( LowerByte(UpperByte(CheckSum) + LowerByte(CheckSum)) != UpperByte(byte1) )
195 return 0;
196 else
197 return 1;
201 static void kbd_int_handler(int irq, void *dev_id, struct pt_regs *regs)
203 struct cir_port *cir;
204 int j;
205 unsigned char int_status;
207 cir = (struct cir_port *)dev_id;
208 int_status = get_int_status(cir);
209 if (int_status & 0x4) {
210 clear_fifo(cir);
211 return;
214 while (cir_get_rx_count(cir)) {
216 cir_data[data_index] = cir_read_data(cir);
218 if (data_index == 0) {/* expecting first byte */
219 if (cir_data[data_index] != leading1) {
220 //printk("!leading byte %x\n", cir_data[data_index]);
221 set_rx_active(cir);
222 clear_fifo(cir);
223 continue;
226 if (data_index == 1) {
227 if ((cir_data[data_index] & 0xf) != leading2) {
228 set_rx_active(cir);
229 data_index = 0; /* start over */
230 clear_fifo(cir);
231 continue;
235 if ( (cir_data[data_index] == 0xff)) { /* last byte */
236 //printk("data_index %d\n", data_index);
237 set_rx_active(cir);
238 #if 0
239 for (j=0; j<=data_index; j++) {
240 printk("rx_data %d: %x\n", j, cir_data[j]);
242 #endif
243 data_index = 0;
244 handle_data(cir_data);
245 return;
247 else if (data_index>16) {
248 set_rx_active(cir);
249 #if 0
250 printk("warning: data_index %d\n", data_index);
251 for (j=0; j<=data_index; j++) {
252 printk("rx_data %d: %x\n", j, cir_data[j]);
254 #endif
255 data_index = 0;
256 clear_fifo(cir);
257 return;
259 data_index++;
264 #define NUM_KBD_BYTES 5
265 static int handle_data(unsigned char *p_data)
267 u_int32_t bit_bucket;
268 u_int32_t i, j;
269 u_int32_t got_bits, next_byte;
270 int down = 0;
272 /* Reorganize the bit stream */
273 for (i=0; i<16; i++)
274 p_data[i] = BitReverse(~p_data[i]);
277 * We've already previously checked that p_data[0]
278 * is equal to leading1 and that (p_data[1] & 0xf)
279 * is equal to leading2. These twelve bits are the
280 * leader code. We can now throw them away (the 12
281 * bits) and continue parsing the stream.
283 bit_bucket = p_data[1] << 12;
284 got_bits = 4;
285 next_byte = 2;
288 * Process four bits at a time
290 for (i=0; i<NUM_KBD_BYTES; i++) {
292 kbdbytes[i]=0;
294 for (j=0; j<8; j++) /* 8 bits per byte */
296 if (got_bits < 4) {
297 bit_bucket |= (p_data[next_byte++] << (8 - got_bits));
298 got_bits += 8;
301 if ((bit_bucket & 0xF000) == 0x8000) {
302 /* Convert 1000b to 1 */
303 kbdbytes[i] = 0x80 | (kbdbytes[i] >> 1);
304 got_bits -= 4;
305 bit_bucket = bit_bucket << 4;
307 else if ((bit_bucket & 0xC000) == 0x8000) {
308 /* Convert 10b to 0 */
309 kbdbytes[i] = kbdbytes[i] >> 1;
310 got_bits -= 2;
311 bit_bucket = bit_bucket << 2;
313 else {
314 /* bad serial stream */
315 return 1;
318 if (next_byte > 16) {
319 //printk("error: too many bytes\n");
320 return 1;
326 if (!CheckSumOk(kbdbytes[0], kbdbytes[1],
327 kbdbytes[2], kbdbytes[3], kbdbytes[4])) {
328 //printk("checksum failed\n");
329 return 1;
332 if (kbdbytes[1] & 0x08) {
333 //printk("m: %x %x %x\n", kbdbytes[1], kbdbytes[2], kbdbytes[3]);
334 handle_mouse_event(kbdbytes[1]);
335 handle_mouse_event(kbdbytes[2]);
336 handle_mouse_event(kbdbytes[3]);
338 else {
339 if (kbdbytes[2] == 0) down = 1;
340 #if 0
341 if (down)
342 printk("down %d\n", kbdbytes[3]);
343 else
344 printk("up %d\n", kbdbytes[3]);
345 #endif
346 handle_keyboard_event(kbdbytes[3], down);
348 return 0;
352 DEFINE_SPINLOCK(kbd_controller_lock);
353 static unsigned char handle_kbd_event(void);
356 int kbd_setkeycode(unsigned int scancode, unsigned int keycode)
358 printk("kbd_setkeycode scancode %x keycode %x\n", scancode, keycode);
359 return 0;
362 int kbd_getkeycode(unsigned int scancode)
364 return scancode;
368 int kbd_translate(unsigned char scancode, unsigned char *keycode,
369 char raw_mode)
371 static int prev_scancode = 0;
373 if (scancode == 0x00 || scancode == 0xff) {
374 prev_scancode = 0;
375 return 0;
378 /* todo */
379 if (!prev_scancode && scancode == 160) { /* Fn key down */
380 //printk("Fn key down\n");
381 prev_scancode = 160;
382 return 0;
384 else if (prev_scancode && scancode == 160) { /* Fn key up */
385 //printk("Fn key up\n");
386 prev_scancode = 0;
387 return 0;
390 /* todo */
391 if (prev_scancode == 160) {
392 if (scancode <= NUM_FN_KEYS) {
393 *keycode = fn_keys[scancode];
394 //printk("fn keycode %d\n", *keycode);
396 else
397 return 0;
399 else if (scancode <= 127) {
400 *keycode = scancode;
402 else
403 return 0;
406 return 1;
409 char kbd_unexpected_up(unsigned char keycode)
411 //printk("kbd_unexpected_up\n");
412 return 0;
415 static unsigned char kbd_exists = 1;
417 static inline void handle_keyboard_event(unsigned char scancode, int down)
419 kbd_exists = 1;
420 handle_scancode(scancode, down);
421 tasklet_schedule(&keyboard_tasklet);
425 void kbd_leds(unsigned char leds)
429 /* dummy */
430 void kbd_init_hw(void)
436 static inline void handle_mouse_event(unsigned char scancode)
438 if(scancode == AUX_RECONNECT){
439 queue->head = queue->tail = 0; /* Flush input queue */
440 // __aux_write_ack(AUX_ENABLE_DEV); /* ping the mouse :) */
441 return;
444 if (aux_count) {
445 int head = queue->head;
447 queue->buf[head] = scancode;
448 head = (head + 1) & (AUX_BUF_SIZE-1);
449 if (head != queue->tail) {
450 queue->head = head;
451 kill_fasync(&queue->fasync, SIGIO, POLL_IN);
452 wake_up_interruptible(&queue->proc_list);
457 static unsigned char get_from_queue(void)
459 unsigned char result;
460 unsigned long flags;
462 spin_lock_irqsave(&kbd_controller_lock, flags);
463 result = queue->buf[queue->tail];
464 queue->tail = (queue->tail + 1) & (AUX_BUF_SIZE-1);
465 spin_unlock_irqrestore(&kbd_controller_lock, flags);
466 return result;
470 static inline int queue_empty(void)
472 return queue->head == queue->tail;
475 static int fasync_aux(int fd, struct file *filp, int on)
477 int retval;
479 //printk("fasync_aux\n");
480 retval = fasync_helper(fd, filp, on, &queue->fasync);
481 if (retval < 0)
482 return retval;
483 return 0;
488 * Random magic cookie for the aux device
490 #define AUX_DEV ((void *)queue)
492 static int release_aux(struct inode * inode, struct file * file)
494 fasync_aux(-1, file, 0);
495 aux_count--;
496 return 0;
499 static int open_aux(struct inode * inode, struct file * file)
501 if (aux_count++) {
502 return 0;
504 queue->head = queue->tail = 0; /* Flush input queue */
505 return 0;
509 * Put bytes from input queue to buffer.
512 static ssize_t read_aux(struct file * file, char * buffer,
513 size_t count, loff_t *ppos)
515 DECLARE_WAITQUEUE(wait, current);
516 ssize_t i = count;
517 unsigned char c;
519 if (queue_empty()) {
520 if (file->f_flags & O_NONBLOCK)
521 return -EAGAIN;
522 add_wait_queue(&queue->proc_list, &wait);
523 repeat:
524 set_current_state(TASK_INTERRUPTIBLE);
525 if (queue_empty() && !signal_pending(current)) {
526 schedule();
527 goto repeat;
529 current->state = TASK_RUNNING;
530 remove_wait_queue(&queue->proc_list, &wait);
532 while (i > 0 && !queue_empty()) {
533 c = get_from_queue();
534 put_user(c, buffer++);
535 i--;
537 if (count-i) {
538 struct inode *inode = file->f_dentry->d_inode;
539 inode->i_atime = current_fs_time(inode->i_sb);
540 return count-i;
542 if (signal_pending(current))
543 return -ERESTARTSYS;
544 return 0;
548 * Write to the aux device.
551 static ssize_t write_aux(struct file * file, const char * buffer,
552 size_t count, loff_t *ppos)
555 * The ITE boards this was tested on did not have the
556 * transmit wires connected.
558 return count;
561 static unsigned int aux_poll(struct file *file, poll_table * wait)
563 poll_wait(file, &queue->proc_list, wait);
564 if (!queue_empty())
565 return POLLIN | POLLRDNORM;
566 return 0;
569 struct file_operations psaux_fops = {
570 .read = read_aux,
571 .write = write_aux,
572 .poll = aux_poll,
573 .open = open_aux,
574 .release = release_aux,
575 .fasync = fasync_aux,
579 * Initialize driver.
581 static struct miscdevice psaux_mouse = {
582 PSMOUSE_MINOR, "psaux", &psaux_fops
585 static int __init psaux_init(void)
587 int retval;
589 retval = misc_register(&psaux_mouse);
590 if(retval < 0)
591 return retval;
593 queue = (struct aux_queue *) kmalloc(sizeof(*queue), GFP_KERNEL);
594 if (!queue) {
595 misc_deregister(&psaux_mouse);
596 return -ENOMEM;
599 memset(queue, 0, sizeof(*queue));
600 queue->head = queue->tail = 0;
601 init_waitqueue_head(&queue->proc_list);
603 return 0;
605 module_init(init_qtronix_990P_kbd);
606 #endif