Linux 2.6.17.3
[linux/fpc-iii.git] / drivers / net / b44.h
blobb178662978f34915cd41c5ff0f1063163452d1fa
1 #ifndef _B44_H
2 #define _B44_H
4 /* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */
5 #define B44_DEVCTRL 0x0000UL /* Device Control */
6 #define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */
7 #define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */
8 #define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */
9 #define DEVCTRL_EPR 0x00008000 /* EPHY Reset */
10 #define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */
11 #define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */
12 #define DEVCTRL_PADDR 0x0007c000 /* PHY Address */
13 #define DEVCTRL_PADDR_SHIFT 18
14 #define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */
15 #define B44_WKUP_LEN 0x0010UL /* Wakeup Length */
16 #define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */
17 #define WKUP_LEN_D0 0x00000080
18 #define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */
19 #define WKUP_LEN_P1_SHIFT 8
20 #define WKUP_LEN_D1 0x00008000
21 #define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */
22 #define WKUP_LEN_P2_SHIFT 16
23 #define WKUP_LEN_D2 0x00000000
24 #define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */
25 #define WKUP_LEN_P3_SHIFT 24
26 #define WKUP_LEN_D3 0x80000000
27 #define B44_ISTAT 0x0020UL /* Interrupt Status */
28 #define ISTAT_LS 0x00000020 /* Link Change (B0 only) */
29 #define ISTAT_PME 0x00000040 /* Power Management Event */
30 #define ISTAT_TO 0x00000080 /* General Purpose Timeout */
31 #define ISTAT_DSCE 0x00000400 /* Descriptor Error */
32 #define ISTAT_DATAE 0x00000800 /* Data Error */
33 #define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */
34 #define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */
35 #define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */
36 #define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */
37 #define ISTAT_RX 0x00010000 /* RX Interrupt */
38 #define ISTAT_TX 0x01000000 /* TX Interrupt */
39 #define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */
40 #define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */
41 #define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */
42 #define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU)
43 #define B44_IMASK 0x0024UL /* Interrupt Mask */
44 #define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX)
45 #define B44_GPTIMER 0x0028UL /* General Purpose Timer */
46 #define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */
47 #define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */
48 #define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */
49 #define B44_FILT_DATA 0x0094UL /* ENET Filter Data */
50 #define B44_TXBURST 0x00A0UL /* TX Max Burst Length */
51 #define B44_RXBURST 0x00A4UL /* RX Max Burst Length */
52 #define B44_MAC_CTRL 0x00A8UL /* MAC Control */
53 #define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */
54 #define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */
55 #define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */
56 #define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */
57 #define MAC_CTRL_PHY_LEDCTRL_SHIFT 5
58 #define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */
59 #define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */
60 #define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */
61 #define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */
62 #define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */
63 #define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */
64 #define RCV_LAZY_FC_SHIFT 24
65 #define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */
66 #define DMATX_CTRL_ENABLE 0x00000001 /* Enable */
67 #define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */
68 #define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */
69 #define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */
70 #define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */
71 #define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */
72 #define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */
73 #define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */
74 #define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
75 #define DMATX_STAT_SMASK 0x0000f000 /* State Mask */
76 #define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */
77 #define DMATX_STAT_SACTIVE 0x00001000 /* State Active */
78 #define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */
79 #define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */
80 #define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */
81 #define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */
82 #define DMATX_STAT_ENONE 0x00000000 /* Error None */
83 #define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
84 #define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */
85 #define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */
86 #define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
87 #define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */
88 #define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */
89 #define DMARX_CTRL_ENABLE 0x00000001 /* Enable */
90 #define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */
91 #define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */
92 #define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */
93 #define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */
94 #define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */
95 #define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
96 #define DMARX_STAT_SMASK 0x0000f000 /* State Mask */
97 #define DMARX_STAT_SDISABLED 0x00000000 /* State Disbaled */
98 #define DMARX_STAT_SACTIVE 0x00001000 /* State Active */
99 #define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */
100 #define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */
101 #define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */
102 #define DMARX_STAT_ENONE 0x00000000 /* Error None */
103 #define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
104 #define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */
105 #define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */
106 #define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
107 #define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */
108 #define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */
109 #define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */
110 #define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */
111 #define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */
112 #define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */
113 #define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */
114 #define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */
115 #define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */
116 #define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */
117 #define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */
118 #define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */
119 #define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */
120 #define B44_RXCONFIG 0x0400UL /* EMAC RX Config */
121 #define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */
122 #define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */
123 #define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */
124 #define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */
125 #define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */
126 #define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */
127 #define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */
128 #define RXCONFIG_RFILT 0x00000080 /* Reject Filter */
129 #define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */
130 #define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */
131 #define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */
132 #define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */
133 #define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */
134 #define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */
135 #define MDIO_DATA_DATA 0x0000ffff /* R/W Data */
136 #define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */
137 #define MDIO_DATA_TA_SHIFT 16
138 #define MDIO_TA_VALID 2
139 #define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */
140 #define MDIO_DATA_RA_SHIFT 18
141 #define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */
142 #define MDIO_DATA_PMD_SHIFT 23
143 #define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */
144 #define MDIO_DATA_OP_SHIFT 28
145 #define MDIO_OP_WRITE 1
146 #define MDIO_OP_READ 2
147 #define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */
148 #define MDIO_DATA_SB_SHIFT 30
149 #define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */
150 #define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */
151 #define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */
152 #define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */
153 #define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */
154 #define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */
155 #define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */
156 #define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */
157 #define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */
158 #define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */
159 #define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */
160 #define CAM_CTRL_MSEL 0x00000002 /* Mask Select */
161 #define CAM_CTRL_READ 0x00000004 /* Read */
162 #define CAM_CTRL_WRITE 0x00000008 /* Read */
163 #define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */
164 #define CAM_CTRL_INDEX_SHIFT 16
165 #define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */
166 #define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */
167 #define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */
168 #define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */
169 #define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */
170 #define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */
171 #define B44_TX_CTRL 0x0430UL /* EMAC TX Control */
172 #define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */
173 #define TX_CTRL_FMODE 0x00000002 /* Flow Mode */
174 #define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */
175 #define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */
176 #define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */
177 #define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */
178 #define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */
179 #define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */
180 #define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */
181 #define B44_TX_O 0x0508UL /* MIB TX Octets */
182 #define B44_TX_P 0x050CUL /* MIB TX Packets */
183 #define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */
184 #define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */
185 #define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */
186 #define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */
187 #define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */
188 #define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */
189 #define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */
190 #define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */
191 #define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */
192 #define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */
193 #define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */
194 #define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */
195 #define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */
196 #define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */
197 #define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */
198 #define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */
199 #define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */
200 #define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */
201 #define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */
202 #define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */
203 #define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */
204 #define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */
205 #define B44_RX_O 0x0588UL /* MIB RX Octets */
206 #define B44_RX_P 0x058CUL /* MIB RX Packets */
207 #define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */
208 #define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */
209 #define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */
210 #define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */
211 #define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */
212 #define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */
213 #define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */
214 #define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */
215 #define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */
216 #define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */
217 #define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */
218 #define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */
219 #define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */
220 #define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */
221 #define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */
222 #define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */
223 #define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */
224 #define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */
225 #define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */
227 /* Silicon backplane register definitions */
228 #define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */
229 #define SBIMSTATE_PC 0x0000000f /* Pipe Count */
230 #define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */
231 #define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */
232 #define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */
233 #define SBIMSTATE_AP_TK 0x00000020 /* Use token only */
234 #define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */
235 #define SBIMSTATE_IBE 0x00020000 /* In Band Error */
236 #define SBIMSTATE_TO 0x00040000 /* Timeout */
237 #define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */
238 #define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
239 #define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
240 #define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
241 #define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
242 #define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */
243 #define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
244 #define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
245 #define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */
246 #define SBTMSLOW_RESET 0x00000001 /* Reset */
247 #define SBTMSLOW_REJECT 0x00000002 /* Reject */
248 #define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */
249 #define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
250 #define SBTMSLOW_PE 0x40000000 /* Power Management Enable */
251 #define SBTMSLOW_BE 0x80000000 /* BIST Enable */
252 #define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */
253 #define SBTMSHIGH_SERR 0x00000001 /* S-error */
254 #define SBTMSHIGH_INT 0x00000002 /* Interrupt */
255 #define SBTMSHIGH_BUSY 0x00000004 /* Busy */
256 #define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */
257 #define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */
258 #define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */
259 #define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */
260 #define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */
261 #define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */
262 #define SBIDHIGH_CC_SHIFT 4
263 #define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */
264 #define SBIDHIGH_VC_SHIFT 16
266 /* SSB PCI config space registers. */
267 #define SSB_BAR0_WIN 0x80
268 #define SSB_BAR1_WIN 0x84
269 #define SSB_SPROM_CONTROL 0x88
270 #define SSB_BAR1_CONTROL 0x8c
272 /* SSB core and host control registers. */
273 #define SSB_CONTROL 0x0000UL
274 #define SSB_ARBCONTROL 0x0010UL
275 #define SSB_ISTAT 0x0020UL
276 #define SSB_IMASK 0x0024UL
277 #define SSB_MBOX 0x0028UL
278 #define SSB_BCAST_ADDR 0x0050UL
279 #define SSB_BCAST_DATA 0x0054UL
280 #define SSB_PCI_TRANS_0 0x0100UL
281 #define SSB_PCI_TRANS_1 0x0104UL
282 #define SSB_PCI_TRANS_2 0x0108UL
283 #define SSB_SPROM 0x0800UL
285 #define SSB_PCI_MEM 0x00000000
286 #define SSB_PCI_IO 0x00000001
287 #define SSB_PCI_CFG0 0x00000002
288 #define SSB_PCI_CFG1 0x00000003
289 #define SSB_PCI_PREF 0x00000004
290 #define SSB_PCI_BURST 0x00000008
291 #define SSB_PCI_MASK0 0xfc000000
292 #define SSB_PCI_MASK1 0xfc000000
293 #define SSB_PCI_MASK2 0xc0000000
295 /* 4400 PHY registers */
296 #define B44_MII_AUXCTRL 24 /* Auxiliary Control */
297 #define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */
298 #define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */
299 #define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */
300 #define B44_MII_ALEDCTRL 26 /* Activity LED */
301 #define MII_ALEDCTRL_ALLMSK 0x7fff
302 #define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */
303 #define MII_TLEDCTRL_ENABLE 0x0040
305 struct dma_desc {
306 u32 ctrl;
307 u32 addr;
310 /* There are only 12 bits in the DMA engine for descriptor offsetting
311 * so the table must be aligned on a boundary of this.
313 #define DMA_TABLE_BYTES 4096
315 #define DESC_CTRL_LEN 0x00001fff
316 #define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */
317 #define DESC_CTRL_EOT 0x10000000 /* End of Table */
318 #define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */
319 #define DESC_CTRL_EOF 0x40000000 /* End of Frame */
320 #define DESC_CTRL_SOF 0x80000000 /* Start of Frame */
322 #define RX_COPY_THRESHOLD 256
324 struct rx_header {
325 u16 len;
326 u16 flags;
327 u16 pad[12];
329 #define RX_HEADER_LEN 28
331 #define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */
332 #define RX_FLAG_CRCERR 0x00000002 /* CRC Error */
333 #define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */
334 #define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */
335 #define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */
336 #define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */
337 #define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */
338 #define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */
339 #define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */
340 #define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO)
342 struct ring_info {
343 struct sk_buff *skb;
344 DECLARE_PCI_UNMAP_ADDR(mapping);
347 #define B44_MCAST_TABLE_SIZE 32
349 #define B44_STAT_REG_DECLARE \
350 _B44(tx_good_octets) \
351 _B44(tx_good_pkts) \
352 _B44(tx_octets) \
353 _B44(tx_pkts) \
354 _B44(tx_broadcast_pkts) \
355 _B44(tx_multicast_pkts) \
356 _B44(tx_len_64) \
357 _B44(tx_len_65_to_127) \
358 _B44(tx_len_128_to_255) \
359 _B44(tx_len_256_to_511) \
360 _B44(tx_len_512_to_1023) \
361 _B44(tx_len_1024_to_max) \
362 _B44(tx_jabber_pkts) \
363 _B44(tx_oversize_pkts) \
364 _B44(tx_fragment_pkts) \
365 _B44(tx_underruns) \
366 _B44(tx_total_cols) \
367 _B44(tx_single_cols) \
368 _B44(tx_multiple_cols) \
369 _B44(tx_excessive_cols) \
370 _B44(tx_late_cols) \
371 _B44(tx_defered) \
372 _B44(tx_carrier_lost) \
373 _B44(tx_pause_pkts) \
374 _B44(rx_good_octets) \
375 _B44(rx_good_pkts) \
376 _B44(rx_octets) \
377 _B44(rx_pkts) \
378 _B44(rx_broadcast_pkts) \
379 _B44(rx_multicast_pkts) \
380 _B44(rx_len_64) \
381 _B44(rx_len_65_to_127) \
382 _B44(rx_len_128_to_255) \
383 _B44(rx_len_256_to_511) \
384 _B44(rx_len_512_to_1023) \
385 _B44(rx_len_1024_to_max) \
386 _B44(rx_jabber_pkts) \
387 _B44(rx_oversize_pkts) \
388 _B44(rx_fragment_pkts) \
389 _B44(rx_missed_pkts) \
390 _B44(rx_crc_align_errs) \
391 _B44(rx_undersize) \
392 _B44(rx_crc_errs) \
393 _B44(rx_align_errs) \
394 _B44(rx_symbol_errs) \
395 _B44(rx_pause_pkts) \
396 _B44(rx_nonpause_pkts)
398 /* SW copy of device statistics, kept up to date by periodic timer
399 * which probes HW values. Check b44_stats_update if you mess with
400 * the layout
402 struct b44_hw_stats {
403 #define _B44(x) u32 x;
404 B44_STAT_REG_DECLARE
405 #undef _B44
408 struct b44 {
409 spinlock_t lock;
411 u32 imask, istat;
413 struct dma_desc *rx_ring, *tx_ring;
415 u32 tx_prod, tx_cons;
416 u32 rx_prod, rx_cons;
418 struct ring_info *rx_buffers;
419 struct ring_info *tx_buffers;
421 u32 dma_offset;
422 u32 flags;
423 #define B44_FLAG_BUGGY_TXPTR 0x00000002
424 #define B44_FLAG_REORDER_BUG 0x00000004
425 #define B44_FLAG_PAUSE_AUTO 0x00008000
426 #define B44_FLAG_FULL_DUPLEX 0x00010000
427 #define B44_FLAG_100_BASE_T 0x00020000
428 #define B44_FLAG_TX_PAUSE 0x00040000
429 #define B44_FLAG_RX_PAUSE 0x00080000
430 #define B44_FLAG_FORCE_LINK 0x00100000
431 #define B44_FLAG_ADV_10HALF 0x01000000
432 #define B44_FLAG_ADV_10FULL 0x02000000
433 #define B44_FLAG_ADV_100HALF 0x04000000
434 #define B44_FLAG_ADV_100FULL 0x08000000
435 #define B44_FLAG_INTERNAL_PHY 0x10000000
436 #define B44_FLAG_RX_RING_HACK 0x20000000
437 #define B44_FLAG_TX_RING_HACK 0x40000000
439 u32 rx_offset;
441 u32 msg_enable;
443 struct timer_list timer;
445 struct net_device_stats stats;
446 struct b44_hw_stats hw_stats;
448 void __iomem *regs;
449 struct pci_dev *pdev;
450 struct net_device *dev;
452 dma_addr_t rx_ring_dma, tx_ring_dma;
454 u32 rx_pending;
455 u32 tx_pending;
456 u8 phy_addr;
457 u8 core_unit;
459 struct mii_if_info mii_if;
462 #endif /* _B44_H */