Linux 2.6.17.3
[linux/fpc-iii.git] / drivers / net / dummy.c
blobdd8c15ac5c77b8cf5448feb9f2518a59ab8d5bfa
1 /* dummy.c: a dummy net driver
3 The purpose of this driver is to provide a device to point a
4 route through, but not to actually transmit packets.
6 Why? If you have a machine whose only connection is an occasional
7 PPP/SLIP/PLIP link, you can only connect to your own hostname
8 when the link is up. Otherwise you have to use localhost.
9 This isn't very consistent.
11 One solution is to set up a dummy link using PPP/SLIP/PLIP,
12 but this seems (to me) too much overhead for too little gain.
13 This driver provides a small alternative. Thus you can do
15 [when not running slip]
16 ifconfig dummy slip.addr.ess.here up
17 [to go to slip]
18 ifconfig dummy down
19 dip whatever
21 This was written by looking at Donald Becker's skeleton driver
22 and the loopback driver. I then threw away anything that didn't
23 apply! Thanks to Alan Cox for the key clue on what to do with
24 misguided packets.
26 Nick Holloway, 27th May 1994
27 [I tweaked this explanation a little but that's all]
28 Alan Cox, 30th May 1994
31 #include <linux/config.h>
32 #include <linux/module.h>
33 #include <linux/kernel.h>
34 #include <linux/netdevice.h>
35 #include <linux/etherdevice.h>
36 #include <linux/init.h>
37 #include <linux/moduleparam.h>
39 static int numdummies = 1;
41 static int dummy_xmit(struct sk_buff *skb, struct net_device *dev);
42 static struct net_device_stats *dummy_get_stats(struct net_device *dev);
44 static int dummy_set_address(struct net_device *dev, void *p)
46 struct sockaddr *sa = p;
48 if (!is_valid_ether_addr(sa->sa_data))
49 return -EADDRNOTAVAIL;
51 memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
52 return 0;
55 /* fake multicast ability */
56 static void set_multicast_list(struct net_device *dev)
60 static void __init dummy_setup(struct net_device *dev)
62 /* Initialize the device structure. */
63 dev->get_stats = dummy_get_stats;
64 dev->hard_start_xmit = dummy_xmit;
65 dev->set_multicast_list = set_multicast_list;
66 dev->set_mac_address = dummy_set_address;
68 /* Fill in device structure with ethernet-generic values. */
69 ether_setup(dev);
70 dev->tx_queue_len = 0;
71 dev->change_mtu = NULL;
72 dev->flags |= IFF_NOARP;
73 dev->flags &= ~IFF_MULTICAST;
74 SET_MODULE_OWNER(dev);
75 random_ether_addr(dev->dev_addr);
78 static int dummy_xmit(struct sk_buff *skb, struct net_device *dev)
80 struct net_device_stats *stats = netdev_priv(dev);
82 stats->tx_packets++;
83 stats->tx_bytes+=skb->len;
85 dev_kfree_skb(skb);
86 return 0;
89 static struct net_device_stats *dummy_get_stats(struct net_device *dev)
91 return netdev_priv(dev);
94 static struct net_device **dummies;
96 /* Number of dummy devices to be set up by this module. */
97 module_param(numdummies, int, 0);
98 MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
100 static int __init dummy_init_one(int index)
102 struct net_device *dev_dummy;
103 int err;
105 dev_dummy = alloc_netdev(sizeof(struct net_device_stats),
106 "dummy%d", dummy_setup);
108 if (!dev_dummy)
109 return -ENOMEM;
111 if ((err = register_netdev(dev_dummy))) {
112 free_netdev(dev_dummy);
113 dev_dummy = NULL;
114 } else {
115 dummies[index] = dev_dummy;
118 return err;
121 static void dummy_free_one(int index)
123 unregister_netdev(dummies[index]);
124 free_netdev(dummies[index]);
127 static int __init dummy_init_module(void)
129 int i, err = 0;
130 dummies = kmalloc(numdummies * sizeof(void *), GFP_KERNEL);
131 if (!dummies)
132 return -ENOMEM;
133 for (i = 0; i < numdummies && !err; i++)
134 err = dummy_init_one(i);
135 if (err) {
136 while (--i >= 0)
137 dummy_free_one(i);
139 return err;
142 static void __exit dummy_cleanup_module(void)
144 int i;
145 for (i = 0; i < numdummies; i++)
146 dummy_free_one(i);
147 kfree(dummies);
150 module_init(dummy_init_module);
151 module_exit(dummy_cleanup_module);
152 MODULE_LICENSE("GPL");