4 * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
5 * Andrzej Hajda <a.hajda@samsung.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #ifndef __DRM_MIPI_DSI_H__
13 #define __DRM_MIPI_DSI_H__
15 #include <linux/device.h>
18 struct mipi_dsi_device
;
20 /* request ACK from peripheral */
21 #define MIPI_DSI_MSG_REQ_ACK BIT(0)
22 /* use Low Power Mode to transmit message */
23 #define MIPI_DSI_MSG_USE_LPM BIT(1)
26 * struct mipi_dsi_msg - read/write DSI buffer
27 * @channel: virtual channel id
28 * @type: payload data type
29 * @flags: flags controlling this message transmission
30 * @tx_len: length of @tx_buf
31 * @tx_buf: data to be written
32 * @rx_len: length of @rx_buf
33 * @rx_buf: data to be read, or NULL
47 bool mipi_dsi_packet_format_is_short(u8 type
);
48 bool mipi_dsi_packet_format_is_long(u8 type
);
51 * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
52 * @size: size (in bytes) of the packet
53 * @header: the four bytes that make up the header (Data ID, Word Count or
54 * Packet Data, and ECC)
55 * @payload_length: number of bytes in the payload
56 * @payload: a pointer to a buffer containing the payload, if any
58 struct mipi_dsi_packet
{
61 size_t payload_length
;
65 int mipi_dsi_create_packet(struct mipi_dsi_packet
*packet
,
66 const struct mipi_dsi_msg
*msg
);
69 * struct mipi_dsi_host_ops - DSI bus operations
70 * @attach: attach DSI device to DSI host
71 * @detach: detach DSI device from DSI host
72 * @transfer: transmit a DSI packet
74 * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
75 * structures. This structure contains information about the type of packet
76 * being transmitted as well as the transmit and receive buffers. When an
77 * error is encountered during transmission, this function will return a
78 * negative error code. On success it shall return the number of bytes
79 * transmitted for write packets or the number of bytes received for read
82 * Note that typically DSI packet transmission is atomic, so the .transfer()
83 * function will seldomly return anything other than the number of bytes
84 * contained in the transmit buffer on success.
86 struct mipi_dsi_host_ops
{
87 int (*attach
)(struct mipi_dsi_host
*host
,
88 struct mipi_dsi_device
*dsi
);
89 int (*detach
)(struct mipi_dsi_host
*host
,
90 struct mipi_dsi_device
*dsi
);
91 ssize_t (*transfer
)(struct mipi_dsi_host
*host
,
92 const struct mipi_dsi_msg
*msg
);
96 * struct mipi_dsi_host - DSI host device
97 * @dev: driver model device node for this DSI host
98 * @ops: DSI host operations
99 * @list: list management
101 struct mipi_dsi_host
{
103 const struct mipi_dsi_host_ops
*ops
;
104 struct list_head list
;
107 int mipi_dsi_host_register(struct mipi_dsi_host
*host
);
108 void mipi_dsi_host_unregister(struct mipi_dsi_host
*host
);
109 struct mipi_dsi_host
*of_find_mipi_dsi_host_by_node(struct device_node
*node
);
114 #define MIPI_DSI_MODE_VIDEO BIT(0)
115 /* video burst mode */
116 #define MIPI_DSI_MODE_VIDEO_BURST BIT(1)
117 /* video pulse mode */
118 #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2)
119 /* enable auto vertical count mode */
120 #define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3)
121 /* enable hsync-end packets in vsync-pulse and v-porch area */
122 #define MIPI_DSI_MODE_VIDEO_HSE BIT(4)
123 /* disable hfront-porch area */
124 #define MIPI_DSI_MODE_VIDEO_HFP BIT(5)
125 /* disable hback-porch area */
126 #define MIPI_DSI_MODE_VIDEO_HBP BIT(6)
127 /* disable hsync-active area */
128 #define MIPI_DSI_MODE_VIDEO_HSA BIT(7)
129 /* flush display FIFO on vsync pulse */
130 #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8)
131 /* disable EoT packets in HS mode */
132 #define MIPI_DSI_MODE_EOT_PACKET BIT(9)
133 /* device supports non-continuous clock behavior (DSI spec 5.6.1) */
134 #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10)
135 /* transmit data in low power */
136 #define MIPI_DSI_MODE_LPM BIT(11)
138 enum mipi_dsi_pixel_format
{
141 MIPI_DSI_FMT_RGB666_PACKED
,
145 #define DSI_DEV_NAME_SIZE 20
148 * struct mipi_dsi_device_info - template for creating a mipi_dsi_device
149 * @type: DSI peripheral chip type
150 * @channel: DSI virtual channel assigned to peripheral
151 * @node: pointer to OF device node or NULL
153 * This is populated and passed to mipi_dsi_device_new to create a new
156 struct mipi_dsi_device_info
{
157 char type
[DSI_DEV_NAME_SIZE
];
159 struct device_node
*node
;
163 * struct mipi_dsi_device - DSI peripheral device
164 * @host: DSI host for this peripheral
165 * @dev: driver model device node for this peripheral
166 * @name: DSI peripheral chip type
167 * @channel: virtual channel assigned to the peripheral
168 * @format: pixel format for video mode
169 * @lanes: number of active data lanes
170 * @mode_flags: DSI operation mode related flags
172 struct mipi_dsi_device
{
173 struct mipi_dsi_host
*host
;
176 char name
[DSI_DEV_NAME_SIZE
];
177 unsigned int channel
;
179 enum mipi_dsi_pixel_format format
;
180 unsigned long mode_flags
;
183 #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
185 static inline struct mipi_dsi_device
*to_mipi_dsi_device(struct device
*dev
)
187 return container_of(dev
, struct mipi_dsi_device
, dev
);
191 * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
192 * given pixel format defined by the MIPI DSI
194 * @fmt: MIPI DSI pixel format
196 * Returns: The number of bits per pixel of the given pixel format.
198 static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt
)
201 case MIPI_DSI_FMT_RGB888
:
202 case MIPI_DSI_FMT_RGB666
:
205 case MIPI_DSI_FMT_RGB666_PACKED
:
208 case MIPI_DSI_FMT_RGB565
:
215 struct mipi_dsi_device
*
216 mipi_dsi_device_register_full(struct mipi_dsi_host
*host
,
217 const struct mipi_dsi_device_info
*info
);
218 void mipi_dsi_device_unregister(struct mipi_dsi_device
*dsi
);
219 struct mipi_dsi_device
*of_find_mipi_dsi_device_by_node(struct device_node
*np
);
220 int mipi_dsi_attach(struct mipi_dsi_device
*dsi
);
221 int mipi_dsi_detach(struct mipi_dsi_device
*dsi
);
222 int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device
*dsi
);
223 int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device
*dsi
);
224 int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device
*dsi
,
227 ssize_t
mipi_dsi_generic_write(struct mipi_dsi_device
*dsi
, const void *payload
,
229 ssize_t
mipi_dsi_generic_read(struct mipi_dsi_device
*dsi
, const void *params
,
230 size_t num_params
, void *data
, size_t size
);
233 * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
234 * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
236 * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
237 * V-Blanking and H-Blanking information
239 enum mipi_dsi_dcs_tear_mode
{
240 MIPI_DSI_DCS_TEAR_MODE_VBLANK
,
241 MIPI_DSI_DCS_TEAR_MODE_VHBLANK
,
244 #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
245 #define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3)
246 #define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4)
247 #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
248 #define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6)
250 ssize_t
mipi_dsi_dcs_write_buffer(struct mipi_dsi_device
*dsi
,
251 const void *data
, size_t len
);
252 ssize_t
mipi_dsi_dcs_write(struct mipi_dsi_device
*dsi
, u8 cmd
,
253 const void *data
, size_t len
);
254 ssize_t
mipi_dsi_dcs_read(struct mipi_dsi_device
*dsi
, u8 cmd
, void *data
,
256 int mipi_dsi_dcs_nop(struct mipi_dsi_device
*dsi
);
257 int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device
*dsi
);
258 int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device
*dsi
, u8
*mode
);
259 int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device
*dsi
, u8
*format
);
260 int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device
*dsi
);
261 int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device
*dsi
);
262 int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device
*dsi
);
263 int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device
*dsi
);
264 int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device
*dsi
, u16 start
,
266 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device
*dsi
, u16 start
,
268 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device
*dsi
);
269 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device
*dsi
,
270 enum mipi_dsi_dcs_tear_mode mode
);
271 int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device
*dsi
, u8 format
);
272 int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device
*dsi
, u16 scanline
);
273 int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device
*dsi
,
275 int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device
*dsi
,
279 * struct mipi_dsi_driver - DSI driver
280 * @driver: device driver model driver
281 * @probe: callback for device binding
282 * @remove: callback for device unbinding
283 * @shutdown: called at shutdown time to quiesce the device
285 struct mipi_dsi_driver
{
286 struct device_driver driver
;
287 int(*probe
)(struct mipi_dsi_device
*dsi
);
288 int(*remove
)(struct mipi_dsi_device
*dsi
);
289 void (*shutdown
)(struct mipi_dsi_device
*dsi
);
292 static inline struct mipi_dsi_driver
*
293 to_mipi_dsi_driver(struct device_driver
*driver
)
295 return container_of(driver
, struct mipi_dsi_driver
, driver
);
298 static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device
*dsi
)
300 return dev_get_drvdata(&dsi
->dev
);
303 static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device
*dsi
, void *data
)
305 dev_set_drvdata(&dsi
->dev
, data
);
308 int mipi_dsi_driver_register_full(struct mipi_dsi_driver
*driver
,
309 struct module
*owner
);
310 void mipi_dsi_driver_unregister(struct mipi_dsi_driver
*driver
);
312 #define mipi_dsi_driver_register(driver) \
313 mipi_dsi_driver_register_full(driver, THIS_MODULE)
315 #define module_mipi_dsi_driver(__mipi_dsi_driver) \
316 module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
317 mipi_dsi_driver_unregister)
319 #endif /* __DRM_MIPI_DSI__ */