drivers/usb/musb/musb_virthub.c

   1 /*
   2  * MUSB OTG driver virtual root hub support
   3  *
   4  * Copyright 2005 Mentor Graphics Corporation
   5  * Copyright (C) 2005-2006 by Texas Instruments
   6  * Copyright (C) 2006-2007 Nokia Corporation
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  *
  22  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
  23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  25  * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32  *
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/kernel.h>
  37 #include <linux/sched.h>
  38 #include <linux/errno.h>
  39 #include <linux/time.h>
  40 #include <linux/timer.h>
  41
  42 #include <asm/unaligned.h>
  43
  44 #include "musb_core.h"
  45
  46 void musb_host_finish_resume(struct work_struct *work)
  47 {
  48         struct musb *musb;
  49         unsigned long flags;
  50         u8 power;
  51
  52         musb = container_of(work, struct musb, finish_resume_work.work);
  53
  54         spin_lock_irqsave(&musb->lock, flags);
  55
  56         power = musb_readb(musb->mregs, MUSB_POWER);
  57         power &= ~MUSB_POWER_RESUME;
  58         musb_dbg(musb, "root port resume stopped, power %02x", power);
  59         musb_writeb(musb->mregs, MUSB_POWER, power);
  60
  61         /*
  62          * ISSUE:  DaVinci (RTL 1.300) disconnects after
  63          * resume of high speed peripherals (but not full
  64          * speed ones).
  65          */
  66         musb->is_active = 1;
  67         musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
  68         musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
  69         usb_hcd_poll_rh_status(musb->hcd);
  70         /* NOTE: it might really be A_WAIT_BCON ... */
  71         musb->xceiv->otg->state = OTG_STATE_A_HOST;
  72
  73         spin_unlock_irqrestore(&musb->lock, flags);
  74 }
  75
  76 void musb_port_suspend(struct musb *musb, bool do_suspend)
  77 {
  78         struct usb_otg  *otg = musb->xceiv->otg;
  79         u8              power;
  80         void __iomem    *mbase = musb->mregs;
  81
  82         if (!is_host_active(musb))
  83                 return;
  84
  85         /* NOTE:  this doesn't necessarily put PHY into low power mode,
  86          * turning off its clock; that's a function of PHY integration and
  87          * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
  88          * SE0 changing to connect (J) or wakeup (K) states.
  89          */
  90         power = musb_readb(mbase, MUSB_POWER);
  91         if (do_suspend) {
  92                 int retries = 10000;
  93
  94                 power &= ~MUSB_POWER_RESUME;
  95                 power |= MUSB_POWER_SUSPENDM;
  96                 musb_writeb(mbase, MUSB_POWER, power);
  97
  98                 /* Needed for OPT A tests */
  99                 power = musb_readb(mbase, MUSB_POWER);
 100                 while (power & MUSB_POWER_SUSPENDM) {
 101                         power = musb_readb(mbase, MUSB_POWER);
 102                         if (retries-- < 1)
 103                                 break;
 104                 }
 105
 106                 musb_dbg(musb, "Root port suspended, power %02x", power);
 107
 108                 musb->port1_status |= USB_PORT_STAT_SUSPEND;
 109                 switch (musb->xceiv->otg->state) {
 110                 case OTG_STATE_A_HOST:
 111                         musb->xceiv->otg->state = OTG_STATE_A_SUSPEND;
 112                         musb->is_active = otg->host->b_hnp_enable;
 113                         if (musb->is_active)
 114                                 mod_timer(&musb->otg_timer, jiffies
 115                                         + msecs_to_jiffies(
 116                                                 OTG_TIME_A_AIDL_BDIS));
 117                         musb_platform_try_idle(musb, 0);
 118                         break;
 119                 case OTG_STATE_B_HOST:
 120                         musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON;
 121                         musb->is_active = otg->host->b_hnp_enable;
 122                         musb_platform_try_idle(musb, 0);
 123                         break;
 124                 default:
 125                         musb_dbg(musb, "bogus rh suspend? %s",
 126                                 usb_otg_state_string(musb->xceiv->otg->state));
 127                 }
 128         } else if (power & MUSB_POWER_SUSPENDM) {
 129                 power &= ~MUSB_POWER_SUSPENDM;
 130                 power |= MUSB_POWER_RESUME;
 131                 musb_writeb(mbase, MUSB_POWER, power);
 132
 133                 musb_dbg(musb, "Root port resuming, power %02x", power);
 134
 135                 musb->port1_status |= MUSB_PORT_STAT_RESUME;
 136                 schedule_delayed_work(&musb->finish_resume_work,
 137                                       msecs_to_jiffies(USB_RESUME_TIMEOUT));
 138         }
 139 }
 140
 141 void musb_port_reset(struct musb *musb, bool do_reset)
 142 {
 143         u8              power;
 144         void __iomem    *mbase = musb->mregs;
 145
 146         if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) {
 147                 musb_dbg(musb, "HNP: Returning from HNP; no hub reset from b_idle");
 148                 musb->port1_status &= ~USB_PORT_STAT_RESET;
 149                 return;
 150         }
 151
 152         if (!is_host_active(musb))
 153                 return;
 154
 155         /* NOTE:  caller guarantees it will turn off the reset when
 156          * the appropriate amount of time has passed
 157          */
 158         power = musb_readb(mbase, MUSB_POWER);
 159         if (do_reset) {
 160                 /*
 161                  * If RESUME is set, we must make sure it stays minimum 20 ms.
 162                  * Then we must clear RESUME and wait a bit to let musb start
 163                  * generating SOFs. If we don't do this, OPT HS A 6.8 tests
 164                  * fail with "Error! Did not receive an SOF before suspend
 165                  * detected".
 166                  */
 167                 if (power &  MUSB_POWER_RESUME) {
 168                         long remain = (unsigned long) musb->rh_timer - jiffies;
 169
 170                         if (musb->rh_timer > 0 && remain > 0) {
 171                                 /* take into account the minimum delay after resume */
 172                                 schedule_delayed_work(
 173                                         &musb->deassert_reset_work, remain);
 174                                 return;
 175                         }
 176
 177                         musb_writeb(mbase, MUSB_POWER,
 178                                     power & ~MUSB_POWER_RESUME);
 179
 180                         /* Give the core 1 ms to clear MUSB_POWER_RESUME */
 181                         schedule_delayed_work(&musb->deassert_reset_work,
 182                                               msecs_to_jiffies(1));
 183                         return;
 184                 }
 185
 186                 power &= 0xf0;
 187                 musb_writeb(mbase, MUSB_POWER,
 188                                 power | MUSB_POWER_RESET);
 189
 190                 musb->port1_status |= USB_PORT_STAT_RESET;
 191                 musb->port1_status &= ~USB_PORT_STAT_ENABLE;
 192                 schedule_delayed_work(&musb->deassert_reset_work,
 193                                       msecs_to_jiffies(50));
 194         } else {
 195                 musb_dbg(musb, "root port reset stopped");
 196                 musb_platform_pre_root_reset_end(musb);
 197                 musb_writeb(mbase, MUSB_POWER,
 198                                 power & ~MUSB_POWER_RESET);
 199                 musb_platform_post_root_reset_end(musb);
 200
 201                 power = musb_readb(mbase, MUSB_POWER);
 202                 if (power & MUSB_POWER_HSMODE) {
 203                         musb_dbg(musb, "high-speed device connected");
 204                         musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
 205                 }
 206
 207                 musb->port1_status &= ~USB_PORT_STAT_RESET;
 208                 musb->port1_status |= USB_PORT_STAT_ENABLE
 209                                         | (USB_PORT_STAT_C_RESET << 16)
 210                                         | (USB_PORT_STAT_C_ENABLE << 16);
 211                 usb_hcd_poll_rh_status(musb->hcd);
 212
 213                 musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
 214         }
 215 }
 216
 217 void musb_root_disconnect(struct musb *musb)
 218 {
 219         struct usb_otg  *otg = musb->xceiv->otg;
 220
 221         musb->port1_status = USB_PORT_STAT_POWER
 222                         | (USB_PORT_STAT_C_CONNECTION << 16);
 223
 224         usb_hcd_poll_rh_status(musb->hcd);
 225         musb->is_active = 0;
 226
 227         switch (musb->xceiv->otg->state) {
 228         case OTG_STATE_A_SUSPEND:
 229                 if (otg->host->b_hnp_enable) {
 230                         musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL;
 231                         musb->g.is_a_peripheral = 1;
 232                         break;
 233                 }
 234                 /* FALLTHROUGH */
 235         case OTG_STATE_A_HOST:
 236                 musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
 237                 musb->is_active = 0;
 238                 break;
 239         case OTG_STATE_A_WAIT_VFALL:
 240                 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 241                 break;
 242         default:
 243                 musb_dbg(musb, "host disconnect (%s)",
 244                         usb_otg_state_string(musb->xceiv->otg->state));
 245         }
 246 }
 247 EXPORT_SYMBOL_GPL(musb_root_disconnect);
 248
 249
 250 /*---------------------------------------------------------------------*/
 251
 252 /* Caller may or may not hold musb->lock */
 253 int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
 254 {
 255         struct musb     *musb = hcd_to_musb(hcd);
 256         int             retval = 0;
 257
 258         /* called in_irq() via usb_hcd_poll_rh_status() */
 259         if (musb->port1_status & 0xffff0000) {
 260                 *buf = 0x02;
 261                 retval = 1;
 262         }
 263         return retval;
 264 }
 265
 266 static int musb_has_gadget(struct musb *musb)
 267 {
 268         /*
 269          * In host-only mode we start a connection right away. In OTG mode
 270          * we have to wait until we loaded a gadget. We don't really need a
 271          * gadget if we operate as a host but we should not start a session
 272          * as a device without a gadget or else we explode.
 273          */
 274 #ifdef CONFIG_USB_MUSB_HOST
 275         return 1;
 276 #else
 277         return musb->port_mode == MUSB_PORT_MODE_HOST;
 278 #endif
 279 }
 280
 281 int musb_hub_control(
 282         struct usb_hcd  *hcd,
 283         u16             typeReq,
 284         u16             wValue,
 285         u16             wIndex,
 286         char            *buf,
 287         u16             wLength)
 288 {
 289         struct musb     *musb = hcd_to_musb(hcd);
 290         u32             temp;
 291         int             retval = 0;
 292         unsigned long   flags;
 293         bool            start_musb = false;
 294
 295         spin_lock_irqsave(&musb->lock, flags);
 296
 297         if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
 298                 spin_unlock_irqrestore(&musb->lock, flags);
 299                 return -ESHUTDOWN;
 300         }
 301
 302         /* hub features:  always zero, setting is a NOP
 303          * port features: reported, sometimes updated when host is active
 304          * no indicators
 305          */
 306         switch (typeReq) {
 307         case ClearHubFeature:
 308         case SetHubFeature:
 309                 switch (wValue) {
 310                 case C_HUB_OVER_CURRENT:
 311                 case C_HUB_LOCAL_POWER:
 312                         break;
 313                 default:
 314                         goto error;
 315                 }
 316                 break;
 317         case ClearPortFeature:
 318                 if ((wIndex & 0xff) != 1)
 319                         goto error;
 320
 321                 switch (wValue) {
 322                 case USB_PORT_FEAT_ENABLE:
 323                         break;
 324                 case USB_PORT_FEAT_SUSPEND:
 325                         musb_port_suspend(musb, false);
 326                         break;
 327                 case USB_PORT_FEAT_POWER:
 328                         if (!hcd->self.is_b_host)
 329                                 musb_platform_set_vbus(musb, 0);
 330                         break;
 331                 case USB_PORT_FEAT_C_CONNECTION:
 332                 case USB_PORT_FEAT_C_ENABLE:
 333                 case USB_PORT_FEAT_C_OVER_CURRENT:
 334                 case USB_PORT_FEAT_C_RESET:
 335                 case USB_PORT_FEAT_C_SUSPEND:
 336                         break;
 337                 default:
 338                         goto error;
 339                 }
 340                 musb_dbg(musb, "clear feature %d", wValue);
 341                 musb->port1_status &= ~(1 << wValue);
 342                 break;
 343         case GetHubDescriptor:
 344                 {
 345                 struct usb_hub_descriptor *desc = (void *)buf;
 346
 347                 desc->bDescLength = 9;
 348                 desc->bDescriptorType = USB_DT_HUB;
 349                 desc->bNbrPorts = 1;
 350                 desc->wHubCharacteristics = cpu_to_le16(
 351                         HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */
 352                         | HUB_CHAR_NO_OCPM      /* no overcurrent reporting */
 353                         );
 354                 desc->bPwrOn2PwrGood = 5;       /* msec/2 */
 355                 desc->bHubContrCurrent = 0;
 356
 357                 /* workaround bogus struct definition */
 358                 desc->u.hs.DeviceRemovable[0] = 0x02;   /* port 1 */
 359                 desc->u.hs.DeviceRemovable[1] = 0xff;
 360                 }
 361                 break;
 362         case GetHubStatus:
 363                 temp = 0;
 364                 *(__le32 *) buf = cpu_to_le32(temp);
 365                 break;
 366         case GetPortStatus:
 367                 if (wIndex != 1)
 368                         goto error;
 369
 370                 put_unaligned(cpu_to_le32(musb->port1_status
 371                                         & ~MUSB_PORT_STAT_RESUME),
 372                                 (__le32 *) buf);
 373
 374                 /* port change status is more interesting */
 375                 musb_dbg(musb, "port status %08x", musb->port1_status);
 376                 break;
 377         case SetPortFeature:
 378                 if ((wIndex & 0xff) != 1)
 379                         goto error;
 380
 381                 switch (wValue) {
 382                 case USB_PORT_FEAT_POWER:
 383                         /* NOTE: this controller has a strange state machine
 384                          * that involves "requesting sessions" according to
 385                          * magic side effects from incompletely-described
 386                          * rules about startup...
 387                          *
 388                          * This call is what really starts the host mode; be
 389                          * very careful about side effects if you reorder any
 390                          * initialization logic, e.g. for OTG, or change any
 391                          * logic relating to VBUS power-up.
 392                          */
 393                         if (!hcd->self.is_b_host && musb_has_gadget(musb))
 394                                 start_musb = true;
 395                         break;
 396                 case USB_PORT_FEAT_RESET:
 397                         musb_port_reset(musb, true);
 398                         break;
 399                 case USB_PORT_FEAT_SUSPEND:
 400                         musb_port_suspend(musb, true);
 401                         break;
 402                 case USB_PORT_FEAT_TEST:
 403                         if (unlikely(is_host_active(musb)))
 404                                 goto error;
 405
 406                         wIndex >>= 8;
 407                         switch (wIndex) {
 408                         case 1:
 409                                 pr_debug("TEST_J\n");
 410                                 temp = MUSB_TEST_J;
 411                                 break;
 412                         case 2:
 413                                 pr_debug("TEST_K\n");
 414                                 temp = MUSB_TEST_K;
 415                                 break;
 416                         case 3:
 417                                 pr_debug("TEST_SE0_NAK\n");
 418                                 temp = MUSB_TEST_SE0_NAK;
 419                                 break;
 420                         case 4:
 421                                 pr_debug("TEST_PACKET\n");
 422                                 temp = MUSB_TEST_PACKET;
 423                                 musb_load_testpacket(musb);
 424                                 break;
 425                         case 5:
 426                                 pr_debug("TEST_FORCE_ENABLE\n");
 427                                 temp = MUSB_TEST_FORCE_HOST
 428                                         | MUSB_TEST_FORCE_HS;
 429
 430                                 musb_writeb(musb->mregs, MUSB_DEVCTL,
 431                                                 MUSB_DEVCTL_SESSION);
 432                                 break;
 433                         case 6:
 434                                 pr_debug("TEST_FIFO_ACCESS\n");
 435                                 temp = MUSB_TEST_FIFO_ACCESS;
 436                                 break;
 437                         default:
 438                                 goto error;
 439                         }
 440                         musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
 441                         break;
 442                 default:
 443                         goto error;
 444                 }
 445                 musb_dbg(musb, "set feature %d", wValue);
 446                 musb->port1_status |= 1 << wValue;
 447                 break;
 448
 449         default:
 450 error:
 451                 /* "protocol stall" on error */
 452                 retval = -EPIPE;
 453         }
 454         spin_unlock_irqrestore(&musb->lock, flags);
 455
 456         if (start_musb)
 457                 musb_start(musb);
 458
 459         return retval;
 460 }