drivers/usb/misc/emi62.c

   1 /*
   2  * Emagic EMI 2|6 usb audio interface firmware loader.
   3  * Copyright (C) 2002
   4  *      Tapio Laxström (tapio.laxstrom@iptime.fi)
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License, as published by
   8  * the Free Software Foundation, version 2.
   9  */
  10 #include <linux/kernel.h>
  11 #include <linux/errno.h>
  12 #include <linux/slab.h>
  13 #include <linux/init.h>
  14 #include <linux/module.h>
  15 #include <linux/usb.h>
  16 #include <linux/delay.h>
  17 #include <linux/firmware.h>
  18 #include <linux/ihex.h>
  19
  20 /* include firmware (variables)*/
  21
  22 /* FIXME: This is quick and dirty solution! */
  23 #define SPDIF   /* if you want SPDIF comment next line */
  24 //#undef SPDIF  /* if you want MIDI uncomment this line */
  25
  26 #ifdef SPDIF
  27 #define FIRMWARE_FW "emi62/spdif.fw"
  28 #else
  29 #define FIRMWARE_FW "emi62/midi.fw"
  30 #endif
  31
  32 #define EMI62_VENDOR_ID                 0x086a  /* Emagic Soft-und Hardware GmBH */
  33 #define EMI62_PRODUCT_ID                0x0110  /* EMI 6|2m without firmware */
  34
  35 #define ANCHOR_LOAD_INTERNAL    0xA0    /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */
  36 #define ANCHOR_LOAD_EXTERNAL    0xA3    /* This command is not implemented in the core. Requires firmware */
  37 #define ANCHOR_LOAD_FPGA        0xA5    /* This command is not implemented in the core. Requires firmware. Emagic extension */
  38 #define MAX_INTERNAL_ADDRESS    0x1B3F  /* This is the highest internal RAM address for the AN2131Q */
  39 #define CPUCS_REG               0x7F92  /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
  40 #define INTERNAL_RAM(address)   (address <= MAX_INTERNAL_ADDRESS)
  41
  42 static int emi62_writememory(struct usb_device *dev, int address,
  43                              const unsigned char *data, int length,
  44                              __u8 bRequest);
  45 static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
  46 static int emi62_load_firmware (struct usb_device *dev);
  47 static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
  48 static void emi62_disconnect(struct usb_interface *intf);
  49 static int __init emi62_init (void);
  50 static void __exit emi62_exit (void);
  51
  52
  53 /* thanks to drivers/usb/serial/keyspan_pda.c code */
  54 static int emi62_writememory(struct usb_device *dev, int address,
  55                              const unsigned char *data, int length,
  56                              __u8 request)
  57 {
  58         int result;
  59         unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
  60
  61         if (!buffer) {
  62                 err("emi62: kmalloc(%d) failed.", length);
  63                 return -ENOMEM;
  64         }
  65         /* Note: usb_control_msg returns negative value on error or length of the
  66          *               data that was written! */
  67         result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
  68         kfree (buffer);
  69         return result;
  70 }
  71
  72 /* thanks to drivers/usb/serial/keyspan_pda.c code */
  73 static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
  74 {
  75         int response;
  76         info("%s - %d", __func__, reset_bit);
  77
  78         response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
  79         if (response < 0) {
  80                 err("emi62: set_reset (%d) failed", reset_bit);
  81         }
  82         return response;
  83 }
  84
  85 #define FW_LOAD_SIZE            1023
  86
  87 static int emi62_load_firmware (struct usb_device *dev)
  88 {
  89         const struct firmware *loader_fw = NULL;
  90         const struct firmware *bitstream_fw = NULL;
  91         const struct firmware *firmware_fw = NULL;
  92         const struct ihex_binrec *rec;
  93         int err;
  94         int i;
  95         __u32 addr;     /* Address to write */
  96         __u8 *buf;
  97
  98         dev_dbg(&dev->dev, "load_firmware\n");
  99         buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
 100         if (!buf) {
 101                 err( "%s - error loading firmware: error = %d", __func__, -ENOMEM);
 102                 err = -ENOMEM;
 103                 goto wraperr;
 104         }
 105
 106         err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev);
 107         if (err)
 108                 goto nofw;
 109
 110         err = request_ihex_firmware(&bitstream_fw, "emi62/bitstream.fw",
 111                                     &dev->dev);
 112         if (err)
 113                 goto nofw;
 114
 115         err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev);
 116         if (err) {
 117         nofw:
 118                 err( "%s - request_firmware() failed", __func__);
 119                 goto wraperr;
 120         }
 121
 122         /* Assert reset (stop the CPU in the EMI) */
 123         err = emi62_set_reset(dev,1);
 124         if (err < 0) {
 125                 err("%s - error loading firmware: error = %d", __func__, err);
 126                 goto wraperr;
 127         }
 128
 129         rec = (const struct ihex_binrec *)loader_fw->data;
 130
 131         /* 1. We need to put the loader for the FPGA into the EZ-USB */
 132         while (rec) {
 133                 err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 134                                         rec->data, be16_to_cpu(rec->len),
 135                                         ANCHOR_LOAD_INTERNAL);
 136                 if (err < 0) {
 137                         err("%s - error loading firmware: error = %d", __func__, err);
 138                         goto wraperr;
 139                 }
 140                 rec = ihex_next_binrec(rec);
 141         }
 142
 143         /* De-assert reset (let the CPU run) */
 144         err = emi62_set_reset(dev,0);
 145         if (err < 0) {
 146                 err("%s - error loading firmware: error = %d", __func__, err);
 147                 goto wraperr;
 148         }
 149         msleep(250);    /* let device settle */
 150
 151         /* 2. We upload the FPGA firmware into the EMI
 152          * Note: collect up to 1023 (yes!) bytes and send them with
 153          * a single request. This is _much_ faster! */
 154         rec = (const struct ihex_binrec *)bitstream_fw->data;
 155         do {
 156                 i = 0;
 157                 addr = be32_to_cpu(rec->addr);
 158
 159                 /* intel hex records are terminated with type 0 element */
 160                 while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) {
 161                         memcpy(buf + i, rec->data, be16_to_cpu(rec->len));
 162                         i += be16_to_cpu(rec->len);
 163                         rec = ihex_next_binrec(rec);
 164                 }
 165                 err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
 166                 if (err < 0) {
 167                         err("%s - error loading firmware: error = %d", __func__, err);
 168                         goto wraperr;
 169                 }
 170         } while (i > 0);
 171
 172         /* Assert reset (stop the CPU in the EMI) */
 173         err = emi62_set_reset(dev,1);
 174         if (err < 0) {
 175                 err("%s - error loading firmware: error = %d", __func__, err);
 176                 goto wraperr;
 177         }
 178
 179         /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
 180         for (rec = (const struct ihex_binrec *)loader_fw->data;
 181              rec; rec = ihex_next_binrec(rec)) {
 182                 err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 183                                         rec->data, be16_to_cpu(rec->len),
 184                                         ANCHOR_LOAD_INTERNAL);
 185                 if (err < 0) {
 186                         err("%s - error loading firmware: error = %d", __func__, err);
 187                         goto wraperr;
 188                 }
 189         }
 190
 191         /* De-assert reset (let the CPU run) */
 192         err = emi62_set_reset(dev,0);
 193         if (err < 0) {
 194                 err("%s - error loading firmware: error = %d", __func__, err);
 195                 goto wraperr;
 196         }
 197         msleep(250);    /* let device settle */
 198
 199         /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
 200
 201         for (rec = (const struct ihex_binrec *)firmware_fw->data;
 202              rec; rec = ihex_next_binrec(rec)) {
 203                 if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) {
 204                         err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 205                                                 rec->data, be16_to_cpu(rec->len),
 206                                                 ANCHOR_LOAD_EXTERNAL);
 207                         if (err < 0) {
 208                                 err("%s - error loading firmware: error = %d", __func__, err);
 209                                 goto wraperr;
 210                         }
 211                 }
 212         }
 213
 214         /* Assert reset (stop the CPU in the EMI) */
 215         err = emi62_set_reset(dev,1);
 216         if (err < 0) {
 217                 err("%s - error loading firmware: error = %d", __func__, err);
 218                 goto wraperr;
 219         }
 220
 221         for (rec = (const struct ihex_binrec *)firmware_fw->data;
 222              rec; rec = ihex_next_binrec(rec)) {
 223                 if (INTERNAL_RAM(be32_to_cpu(rec->addr))) {
 224                         err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 225                                                 rec->data, be16_to_cpu(rec->len),
 226                                                 ANCHOR_LOAD_EXTERNAL);
 227                         if (err < 0) {
 228                                 err("%s - error loading firmware: error = %d", __func__, err);
 229                                 goto wraperr;
 230                         }
 231                 }
 232         }
 233
 234         /* De-assert reset (let the CPU run) */
 235         err = emi62_set_reset(dev,0);
 236         if (err < 0) {
 237                 err("%s - error loading firmware: error = %d", __func__, err);
 238                 goto wraperr;
 239         }
 240         msleep(250);    /* let device settle */
 241
 242         release_firmware(loader_fw);
 243         release_firmware(bitstream_fw);
 244         release_firmware(firmware_fw);
 245
 246         kfree(buf);
 247
 248         /* return 1 to fail the driver inialization
 249          * and give real driver change to load */
 250         return 1;
 251
 252 wraperr:
 253         release_firmware(loader_fw);
 254         release_firmware(bitstream_fw);
 255         release_firmware(firmware_fw);
 256
 257         kfree(buf);
 258         dev_err(&dev->dev, "Error\n");
 259         return err;
 260 }
 261
 262 static __devinitdata struct usb_device_id id_table [] = {
 263         { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) },
 264         { }                                             /* Terminating entry */
 265 };
 266
 267 MODULE_DEVICE_TABLE (usb, id_table);
 268
 269 static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id)
 270 {
 271         struct usb_device *dev = interface_to_usbdev(intf);
 272         dev_dbg(&intf->dev, "emi62_probe\n");
 273
 274         info("%s start", __func__);
 275
 276         emi62_load_firmware(dev);
 277
 278         /* do not return the driver context, let real audio driver do that */
 279         return -EIO;
 280 }
 281
 282 static void emi62_disconnect(struct usb_interface *intf)
 283 {
 284 }
 285
 286 static struct usb_driver emi62_driver = {
 287         .name           = "emi62 - firmware loader",
 288         .probe          = emi62_probe,
 289         .disconnect     = emi62_disconnect,
 290         .id_table       = id_table,
 291 };
 292
 293 static int __init emi62_init (void)
 294 {
 295         int retval;
 296         retval = usb_register (&emi62_driver);
 297         if (retval)
 298                 printk(KERN_ERR "adi-emi: registration failed\n");
 299         return retval;
 300 }
 301
 302 static void __exit emi62_exit (void)
 303 {
 304         usb_deregister (&emi62_driver);
 305 }
 306
 307 module_init(emi62_init);
 308 module_exit(emi62_exit);
 309
 310 MODULE_AUTHOR("Tapio Laxström");
 311 MODULE_DESCRIPTION("Emagic EMI 6|2m firmware loader.");
 312 MODULE_LICENSE("GPL");
 313
 314 MODULE_FIRMWARE("emi62/loader.fw");
 315 MODULE_FIRMWARE("emi62/bitstream.fw");
 316 MODULE_FIRMWARE(FIRMWARE_FW);
 317 /* vi:ai:syntax=c:sw=8:ts=8:tw=80
 318  */