?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
[linux/fpc-iii.git] / drivers / mmc / host / cavium.c
blob89deb451e0ac6225c9481dc21ca21373f46c2d7c
1 /*
2 * Shared part of driver for MMC/SDHC controller on Cavium OCTEON and
3 * ThunderX SOCs.
4 *
5 * This file is subject to the terms and conditions of the GNU General Public
6 * License. See the file "COPYING" in the main directory of this archive
7 * for more details.
8 *
9 * Copyright (C) 2012-2017 Cavium Inc.
10 * Authors:
11 * David Daney <david.daney@cavium.com>
12 * Peter Swain <pswain@cavium.com>
13 * Steven J. Hill <steven.hill@cavium.com>
14 * Jan Glauber <jglauber@cavium.com>
15 */
16 #include <linux/bitfield.h>
17 #include <linux/delay.h>
18 #include <linux/dma-direction.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/gpio/consumer.h>
21 #include <linux/interrupt.h>
22 #include <linux/mmc/mmc.h>
23 #include <linux/mmc/slot-gpio.h>
24 #include <linux/module.h>
25 #include <linux/regulator/consumer.h>
26 #include <linux/scatterlist.h>
27 #include <linux/time.h>
28
29 #include "cavium.h"
30
31 const char *cvm_mmc_irq_names[] = {
32 "MMC Buffer",
33 "MMC Command",
34 "MMC DMA",
35 "MMC Command Error",
36 "MMC DMA Error",
37 "MMC Switch",
38 "MMC Switch Error",
39 "MMC DMA int Fifo",
40 "MMC DMA int",
41 };
42
43 /*
44 * The Cavium MMC host hardware assumes that all commands have fixed
45 * command and response types. These are correct if MMC devices are
46 * being used. However, non-MMC devices like SD use command and
47 * response types that are unexpected by the host hardware.
48 *
49 * The command and response types can be overridden by supplying an
50 * XOR value that is applied to the type. We calculate the XOR value
51 * from the values in this table and the flags passed from the MMC
52 * core.
53 */
54 static struct cvm_mmc_cr_type cvm_mmc_cr_types[] = {
55 {0, 0}, /* CMD0 */
56 {0, 3}, /* CMD1 */
57 {0, 2}, /* CMD2 */
58 {0, 1}, /* CMD3 */
59 {0, 0}, /* CMD4 */
60 {0, 1}, /* CMD5 */
61 {0, 1}, /* CMD6 */
62 {0, 1}, /* CMD7 */
63 {1, 1}, /* CMD8 */
64 {0, 2}, /* CMD9 */
65 {0, 2}, /* CMD10 */
66 {1, 1}, /* CMD11 */
67 {0, 1}, /* CMD12 */
68 {0, 1}, /* CMD13 */
69 {1, 1}, /* CMD14 */
70 {0, 0}, /* CMD15 */
71 {0, 1}, /* CMD16 */
72 {1, 1}, /* CMD17 */
73 {1, 1}, /* CMD18 */
74 {3, 1}, /* CMD19 */
75 {2, 1}, /* CMD20 */
76 {0, 0}, /* CMD21 */
77 {0, 0}, /* CMD22 */
78 {0, 1}, /* CMD23 */
79 {2, 1}, /* CMD24 */
80 {2, 1}, /* CMD25 */
81 {2, 1}, /* CMD26 */
82 {2, 1}, /* CMD27 */
83 {0, 1}, /* CMD28 */
84 {0, 1}, /* CMD29 */
85 {1, 1}, /* CMD30 */
86 {1, 1}, /* CMD31 */
87 {0, 0}, /* CMD32 */
88 {0, 0}, /* CMD33 */
89 {0, 0}, /* CMD34 */
90 {0, 1}, /* CMD35 */
91 {0, 1}, /* CMD36 */
92 {0, 0}, /* CMD37 */
93 {0, 1}, /* CMD38 */
94 {0, 4}, /* CMD39 */
95 {0, 5}, /* CMD40 */
96 {0, 0}, /* CMD41 */
97 {2, 1}, /* CMD42 */
98 {0, 0}, /* CMD43 */
99 {0, 0}, /* CMD44 */
100 {0, 0}, /* CMD45 */
101 {0, 0}, /* CMD46 */
102 {0, 0}, /* CMD47 */
103 {0, 0}, /* CMD48 */
104 {0, 0}, /* CMD49 */
105 {0, 0}, /* CMD50 */
106 {0, 0}, /* CMD51 */
107 {0, 0}, /* CMD52 */
108 {0, 0}, /* CMD53 */
109 {0, 0}, /* CMD54 */
110 {0, 1}, /* CMD55 */
111 {0xff, 0xff}, /* CMD56 */
112 {0, 0}, /* CMD57 */
113 {0, 0}, /* CMD58 */
114 {0, 0}, /* CMD59 */
115 {0, 0}, /* CMD60 */
116 {0, 0}, /* CMD61 */
117 {0, 0}, /* CMD62 */
118 {0, 0} /* CMD63 */
119 };
120
121 static struct cvm_mmc_cr_mods cvm_mmc_get_cr_mods(struct mmc_command *cmd)
122 {
123 struct cvm_mmc_cr_type *cr;
124 u8 hardware_ctype, hardware_rtype;
125 u8 desired_ctype = 0, desired_rtype = 0;
126 struct cvm_mmc_cr_mods r;
127
128 cr = cvm_mmc_cr_types + (cmd->opcode & 0x3f);
129 hardware_ctype = cr->ctype;
130 hardware_rtype = cr->rtype;
131 if (cmd->opcode == MMC_GEN_CMD)
132 hardware_ctype = (cmd->arg & 1) ? 1 : 2;
133
134 switch (mmc_cmd_type(cmd)) {
135 case MMC_CMD_ADTC:
136 desired_ctype = (cmd->data->flags & MMC_DATA_WRITE) ? 2 : 1;
137 break;
138 case MMC_CMD_AC:
139 case MMC_CMD_BC:
140 case MMC_CMD_BCR:
141 desired_ctype = 0;
142 break;
143 }
144
145 switch (mmc_resp_type(cmd)) {
146 case MMC_RSP_NONE:
147 desired_rtype = 0;
148 break;
149 case MMC_RSP_R1:/* MMC_RSP_R5, MMC_RSP_R6, MMC_RSP_R7 */
150 case MMC_RSP_R1B:
151 desired_rtype = 1;
152 break;
153 case MMC_RSP_R2:
154 desired_rtype = 2;
155 break;
156 case MMC_RSP_R3: /* MMC_RSP_R4 */
157 desired_rtype = 3;
158 break;
159 }
160 r.ctype_xor = desired_ctype ^ hardware_ctype;
161 r.rtype_xor = desired_rtype ^ hardware_rtype;
162 return r;
163 }
164
165 static void check_switch_errors(struct cvm_mmc_host *host)
166 {
167 u64 emm_switch;
168
169 emm_switch = readq(host->base + MIO_EMM_SWITCH(host));
170 if (emm_switch & MIO_EMM_SWITCH_ERR0)
171 dev_err(host->dev, "Switch power class error\n");
172 if (emm_switch & MIO_EMM_SWITCH_ERR1)
173 dev_err(host->dev, "Switch hs timing error\n");
174 if (emm_switch & MIO_EMM_SWITCH_ERR2)
175 dev_err(host->dev, "Switch bus width error\n");
176 }
177
178 static void clear_bus_id(u64 *reg)
179 {
180 u64 bus_id_mask = GENMASK_ULL(61, 60);
181
182 *reg &= ~bus_id_mask;
183 }
184
185 static void set_bus_id(u64 *reg, int bus_id)
186 {
187 clear_bus_id(reg);
188 *reg |= FIELD_PREP(GENMASK(61, 60), bus_id);
189 }
190
191 static int get_bus_id(u64 reg)
192 {
193 return FIELD_GET(GENMASK_ULL(61, 60), reg);
194 }
195
196 /*
197 * We never set the switch_exe bit since that would interfere
198 * with the commands send by the MMC core.
199 */
200 static void do_switch(struct cvm_mmc_host *host, u64 emm_switch)
201 {
202 int retries = 100;
203 u64 rsp_sts;
204 int bus_id;
205
206 /*
207 * Modes setting only taken from slot 0. Work around that hardware
208 * issue by first switching to slot 0.
209 */
210 bus_id = get_bus_id(emm_switch);
211 clear_bus_id(&emm_switch);
212 writeq(emm_switch, host->base + MIO_EMM_SWITCH(host));
213
214 set_bus_id(&emm_switch, bus_id);
215 writeq(emm_switch, host->base + MIO_EMM_SWITCH(host));
216
217 /* wait for the switch to finish */
218 do {
219 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
220 if (!(rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL))
221 break;
222 udelay(10);
223 } while (--retries);
224
225 check_switch_errors(host);
226 }
227
228 static bool switch_val_changed(struct cvm_mmc_slot *slot, u64 new_val)
229 {
230 /* Match BUS_ID, HS_TIMING, BUS_WIDTH, POWER_CLASS, CLK_HI, CLK_LO */
231 u64 match = 0x3001070fffffffffull;
232
233 return (slot->cached_switch & match) != (new_val & match);
234 }
235
236 static void set_wdog(struct cvm_mmc_slot *slot, unsigned int ns)
237 {
238 u64 timeout;
239
240 if (!slot->clock)
241 return;
242
243 if (ns)
244 timeout = (slot->clock * ns) / NSEC_PER_SEC;
245 else
246 timeout = (slot->clock * 850ull) / 1000ull;
247 writeq(timeout, slot->host->base + MIO_EMM_WDOG(slot->host));
248 }
249
250 static void cvm_mmc_reset_bus(struct cvm_mmc_slot *slot)
251 {
252 struct cvm_mmc_host *host = slot->host;
253 u64 emm_switch, wdog;
254
255 emm_switch = readq(slot->host->base + MIO_EMM_SWITCH(host));
256 emm_switch &= ~(MIO_EMM_SWITCH_EXE | MIO_EMM_SWITCH_ERR0 |
257 MIO_EMM_SWITCH_ERR1 | MIO_EMM_SWITCH_ERR2);
258 set_bus_id(&emm_switch, slot->bus_id);
259
260 wdog = readq(slot->host->base + MIO_EMM_WDOG(host));
261 do_switch(slot->host, emm_switch);
262
263 slot->cached_switch = emm_switch;
264
265 msleep(20);
266
267 writeq(wdog, slot->host->base + MIO_EMM_WDOG(host));
268 }
269
270 /* Switch to another slot if needed */
271 static void cvm_mmc_switch_to(struct cvm_mmc_slot *slot)
272 {
273 struct cvm_mmc_host *host = slot->host;
274 struct cvm_mmc_slot *old_slot;
275 u64 emm_sample, emm_switch;
276
277 if (slot->bus_id == host->last_slot)
278 return;
279
280 if (host->last_slot >= 0 && host->slot[host->last_slot]) {
281 old_slot = host->slot[host->last_slot];
282 old_slot->cached_switch = readq(host->base + MIO_EMM_SWITCH(host));
283 old_slot->cached_rca = readq(host->base + MIO_EMM_RCA(host));
284 }
285
286 writeq(slot->cached_rca, host->base + MIO_EMM_RCA(host));
287 emm_switch = slot->cached_switch;
288 set_bus_id(&emm_switch, slot->bus_id);
289 do_switch(host, emm_switch);
290
291 emm_sample = FIELD_PREP(MIO_EMM_SAMPLE_CMD_CNT, slot->cmd_cnt) |
292 FIELD_PREP(MIO_EMM_SAMPLE_DAT_CNT, slot->dat_cnt);
293 writeq(emm_sample, host->base + MIO_EMM_SAMPLE(host));
294
295 host->last_slot = slot->bus_id;
296 }
297
298 static void do_read(struct cvm_mmc_host *host, struct mmc_request *req,
299 u64 dbuf)
300 {
301 struct sg_mapping_iter *smi = &host->smi;
302 int data_len = req->data->blocks * req->data->blksz;
303 int bytes_xfered, shift = -1;
304 u64 dat = 0;
305
306 /* Auto inc from offset zero */
307 writeq((0x10000 | (dbuf << 6)), host->base + MIO_EMM_BUF_IDX(host));
308
309 for (bytes_xfered = 0; bytes_xfered < data_len;) {
310 if (smi->consumed >= smi->length) {
311 if (!sg_miter_next(smi))
312 break;
313 smi->consumed = 0;
314 }
315
316 if (shift < 0) {
317 dat = readq(host->base + MIO_EMM_BUF_DAT(host));
318 shift = 56;
319 }
320
321 while (smi->consumed < smi->length && shift >= 0) {
322 ((u8 *)smi->addr)[smi->consumed] = (dat >> shift) & 0xff;
323 bytes_xfered++;
324 smi->consumed++;
325 shift -= 8;
326 }
327 }
328
329 sg_miter_stop(smi);
330 req->data->bytes_xfered = bytes_xfered;
331 req->data->error = 0;
332 }
333
334 static void do_write(struct mmc_request *req)
335 {
336 req->data->bytes_xfered = req->data->blocks * req->data->blksz;
337 req->data->error = 0;
338 }
339
340 static void set_cmd_response(struct cvm_mmc_host *host, struct mmc_request *req,
341 u64 rsp_sts)
342 {
343 u64 rsp_hi, rsp_lo;
344
345 if (!(rsp_sts & MIO_EMM_RSP_STS_RSP_VAL))
346 return;
347
348 rsp_lo = readq(host->base + MIO_EMM_RSP_LO(host));
349
350 switch (FIELD_GET(MIO_EMM_RSP_STS_RSP_TYPE, rsp_sts)) {
351 case 1:
352 case 3:
353 req->cmd->resp[0] = (rsp_lo >> 8) & 0xffffffff;
354 req->cmd->resp[1] = 0;
355 req->cmd->resp[2] = 0;
356 req->cmd->resp[3] = 0;
357 break;
358 case 2:
359 req->cmd->resp[3] = rsp_lo & 0xffffffff;
360 req->cmd->resp[2] = (rsp_lo >> 32) & 0xffffffff;
361 rsp_hi = readq(host->base + MIO_EMM_RSP_HI(host));
362 req->cmd->resp[1] = rsp_hi & 0xffffffff;
363 req->cmd->resp[0] = (rsp_hi >> 32) & 0xffffffff;
364 break;
365 }
366 }
367
368 static int get_dma_dir(struct mmc_data *data)
369 {
370 return (data->flags & MMC_DATA_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
371 }
372
373 static int finish_dma_single(struct cvm_mmc_host *host, struct mmc_data *data)
374 {
375 data->bytes_xfered = data->blocks * data->blksz;
376 data->error = 0;
377 dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
378 return 1;
379 }
380
381 static int finish_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data)
382 {
383 u64 fifo_cfg;
384 int count;
385
386 /* Check if there are any pending requests left */
387 fifo_cfg = readq(host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
388 count = FIELD_GET(MIO_EMM_DMA_FIFO_CFG_COUNT, fifo_cfg);
389 if (count)
390 dev_err(host->dev, "%u requests still pending\n", count);
391
392 data->bytes_xfered = data->blocks * data->blksz;
393 data->error = 0;
394
395 /* Clear and disable FIFO */
396 writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
397 dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
398 return 1;
399 }
400
401 static int finish_dma(struct cvm_mmc_host *host, struct mmc_data *data)
402 {
403 if (host->use_sg && data->sg_len > 1)
404 return finish_dma_sg(host, data);
405 else
406 return finish_dma_single(host, data);
407 }
408
409 static int check_status(u64 rsp_sts)
410 {
411 if (rsp_sts & MIO_EMM_RSP_STS_RSP_BAD_STS ||
412 rsp_sts & MIO_EMM_RSP_STS_RSP_CRC_ERR ||
413 rsp_sts & MIO_EMM_RSP_STS_BLK_CRC_ERR)
414 return -EILSEQ;
415 if (rsp_sts & MIO_EMM_RSP_STS_RSP_TIMEOUT ||
416 rsp_sts & MIO_EMM_RSP_STS_BLK_TIMEOUT)
417 return -ETIMEDOUT;
418 if (rsp_sts & MIO_EMM_RSP_STS_DBUF_ERR)
419 return -EIO;
420 return 0;
421 }
422
423 /* Try to clean up failed DMA. */
424 static void cleanup_dma(struct cvm_mmc_host *host, u64 rsp_sts)
425 {
426 u64 emm_dma;
427
428 emm_dma = readq(host->base + MIO_EMM_DMA(host));
429 emm_dma |= FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
430 FIELD_PREP(MIO_EMM_DMA_DAT_NULL, 1);
431 set_bus_id(&emm_dma, get_bus_id(rsp_sts));
432 writeq(emm_dma, host->base + MIO_EMM_DMA(host));
433 }
434
435 irqreturn_t cvm_mmc_interrupt(int irq, void *dev_id)
436 {
437 struct cvm_mmc_host *host = dev_id;
438 struct mmc_request *req;
439 unsigned long flags = 0;
440 u64 emm_int, rsp_sts;
441 bool host_done;
442
443 if (host->need_irq_handler_lock)
444 spin_lock_irqsave(&host->irq_handler_lock, flags);
445 else
446 __acquire(&host->irq_handler_lock);
447
448 /* Clear interrupt bits (write 1 clears ). */
449 emm_int = readq(host->base + MIO_EMM_INT(host));
450 writeq(emm_int, host->base + MIO_EMM_INT(host));
451
452 if (emm_int & MIO_EMM_INT_SWITCH_ERR)
453 check_switch_errors(host);
454
455 req = host->current_req;
456 if (!req)
457 goto out;
458
459 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
460 /*
461 * dma_val set means DMA is still in progress. Don't touch
462 * the request and wait for the interrupt indicating that
463 * the DMA is finished.
464 */
465 if ((rsp_sts & MIO_EMM_RSP_STS_DMA_VAL) && host->dma_active)
466 goto out;
467
468 if (!host->dma_active && req->data &&
469 (emm_int & MIO_EMM_INT_BUF_DONE)) {
470 unsigned int type = (rsp_sts >> 7) & 3;
471
472 if (type == 1)
473 do_read(host, req, rsp_sts & MIO_EMM_RSP_STS_DBUF);
474 else if (type == 2)
475 do_write(req);
476 }
477
478 host_done = emm_int & MIO_EMM_INT_CMD_DONE ||
479 emm_int & MIO_EMM_INT_DMA_DONE ||
480 emm_int & MIO_EMM_INT_CMD_ERR ||
481 emm_int & MIO_EMM_INT_DMA_ERR;
482
483 if (!(host_done && req->done))
484 goto no_req_done;
485
486 req->cmd->error = check_status(rsp_sts);
487
488 if (host->dma_active && req->data)
489 if (!finish_dma(host, req->data))
490 goto no_req_done;
491
492 set_cmd_response(host, req, rsp_sts);
493 if ((emm_int & MIO_EMM_INT_DMA_ERR) &&
494 (rsp_sts & MIO_EMM_RSP_STS_DMA_PEND))
495 cleanup_dma(host, rsp_sts);
496
497 host->current_req = NULL;
498 req->done(req);
499
500 no_req_done:
501 if (host->dmar_fixup_done)
502 host->dmar_fixup_done(host);
503 if (host_done)
504 host->release_bus(host);
505 out:
506 if (host->need_irq_handler_lock)
507 spin_unlock_irqrestore(&host->irq_handler_lock, flags);
508 else
509 __release(&host->irq_handler_lock);
510 return IRQ_RETVAL(emm_int != 0);
511 }
512
513 /*
514 * Program DMA_CFG and if needed DMA_ADR.
515 * Returns 0 on error, DMA address otherwise.
516 */
517 static u64 prepare_dma_single(struct cvm_mmc_host *host, struct mmc_data *data)
518 {
519 u64 dma_cfg, addr;
520 int count, rw;
521
522 count = dma_map_sg(host->dev, data->sg, data->sg_len,
523 get_dma_dir(data));
524 if (!count)
525 return 0;
526
527 rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
528 dma_cfg = FIELD_PREP(MIO_EMM_DMA_CFG_EN, 1) |
529 FIELD_PREP(MIO_EMM_DMA_CFG_RW, rw);
530 #ifdef __LITTLE_ENDIAN
531 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ENDIAN, 1);
532 #endif
533 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_SIZE,
534 (sg_dma_len(&data->sg[0]) / 8) - 1);
535
536 addr = sg_dma_address(&data->sg[0]);
537 if (!host->big_dma_addr)
538 dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ADR, addr);
539 writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host));
540
541 pr_debug("[%s] sg_dma_len: %u total sg_elem: %d\n",
542 (rw) ? "W" : "R", sg_dma_len(&data->sg[0]), count);
543
544 if (host->big_dma_addr)
545 writeq(addr, host->dma_base + MIO_EMM_DMA_ADR(host));
546 return addr;
547 }
548
549 /*
550 * Queue complete sg list into the FIFO.
551 * Returns 0 on error, 1 otherwise.
552 */
553 static u64 prepare_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data)
554 {
555 struct scatterlist *sg;
556 u64 fifo_cmd, addr;
557 int count, i, rw;
558
559 count = dma_map_sg(host->dev, data->sg, data->sg_len,
560 get_dma_dir(data));
561 if (!count)
562 return 0;
563 if (count > 16)
564 goto error;
565
566 /* Enable FIFO by removing CLR bit */
567 writeq(0, host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
568
569 for_each_sg(data->sg, sg, count, i) {
570 /* Program DMA address */
571 addr = sg_dma_address(sg);
572 if (addr & 7)
573 goto error;
574 writeq(addr, host->dma_base + MIO_EMM_DMA_FIFO_ADR(host));
575
576 /*
577 * If we have scatter-gather support we also have an extra
578 * register for the DMA addr, so no need to check
579 * host->big_dma_addr here.
580 */
581 rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
582 fifo_cmd = FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_RW, rw);
583
584 /* enable interrupts on the last element */
585 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_INTDIS,
586 (i + 1 == count) ? 0 : 1);
587
588 #ifdef __LITTLE_ENDIAN
589 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_ENDIAN, 1);
590 #endif
591 fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_SIZE,
592 sg_dma_len(sg) / 8 - 1);
593 /*
594 * The write copies the address and the command to the FIFO
595 * and increments the FIFO's COUNT field.
596 */
597 writeq(fifo_cmd, host->dma_base + MIO_EMM_DMA_FIFO_CMD(host));
598 pr_debug("[%s] sg_dma_len: %u sg_elem: %d/%d\n",
599 (rw) ? "W" : "R", sg_dma_len(sg), i, count);
600 }
601
602 /*
603 * In difference to prepare_dma_single we don't return the
604 * address here, as it would not make sense for scatter-gather.
605 * The dma fixup is only required on models that don't support
606 * scatter-gather, so that is not a problem.
607 */
608 return 1;
609
610 error:
611 WARN_ON_ONCE(1);
612 dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
613 /* Disable FIFO */
614 writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
615 return 0;
616 }
617
618 static u64 prepare_dma(struct cvm_mmc_host *host, struct mmc_data *data)
619 {
620 if (host->use_sg && data->sg_len > 1)
621 return prepare_dma_sg(host, data);
622 else
623 return prepare_dma_single(host, data);
624 }
625
626 static u64 prepare_ext_dma(struct mmc_host *mmc, struct mmc_request *mrq)
627 {
628 struct cvm_mmc_slot *slot = mmc_priv(mmc);
629 u64 emm_dma;
630
631 emm_dma = FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
632 FIELD_PREP(MIO_EMM_DMA_SECTOR,
633 mmc_card_is_blockaddr(mmc->card) ? 1 : 0) |
634 FIELD_PREP(MIO_EMM_DMA_RW,
635 (mrq->data->flags & MMC_DATA_WRITE) ? 1 : 0) |
636 FIELD_PREP(MIO_EMM_DMA_BLOCK_CNT, mrq->data->blocks) |
637 FIELD_PREP(MIO_EMM_DMA_CARD_ADDR, mrq->cmd->arg);
638 set_bus_id(&emm_dma, slot->bus_id);
639
640 if (mmc_card_mmc(mmc->card) || (mmc_card_sd(mmc->card) &&
641 (mmc->card->scr.cmds & SD_SCR_CMD23_SUPPORT)))
642 emm_dma |= FIELD_PREP(MIO_EMM_DMA_MULTI, 1);
643
644 pr_debug("[%s] blocks: %u multi: %d\n",
645 (emm_dma & MIO_EMM_DMA_RW) ? "W" : "R",
646 mrq->data->blocks, (emm_dma & MIO_EMM_DMA_MULTI) ? 1 : 0);
647 return emm_dma;
648 }
649
650 static void cvm_mmc_dma_request(struct mmc_host *mmc,
651 struct mmc_request *mrq)
652 {
653 struct cvm_mmc_slot *slot = mmc_priv(mmc);
654 struct cvm_mmc_host *host = slot->host;
655 struct mmc_data *data;
656 u64 emm_dma, addr;
657
658 if (!mrq->data || !mrq->data->sg || !mrq->data->sg_len ||
659 !mrq->stop || mrq->stop->opcode != MMC_STOP_TRANSMISSION) {
660 dev_err(&mmc->card->dev,
661 "Error: cmv_mmc_dma_request no data\n");
662 goto error;
663 }
664
665 cvm_mmc_switch_to(slot);
666
667 data = mrq->data;
668 pr_debug("DMA request blocks: %d block_size: %d total_size: %d\n",
669 data->blocks, data->blksz, data->blocks * data->blksz);
670 if (data->timeout_ns)
671 set_wdog(slot, data->timeout_ns);
672
673 WARN_ON(host->current_req);
674 host->current_req = mrq;
675
676 emm_dma = prepare_ext_dma(mmc, mrq);
677 addr = prepare_dma(host, data);
678 if (!addr) {
679 dev_err(host->dev, "prepare_dma failed\n");
680 goto error;
681 }
682
683 host->dma_active = true;
684 host->int_enable(host, MIO_EMM_INT_CMD_ERR | MIO_EMM_INT_DMA_DONE |
685 MIO_EMM_INT_DMA_ERR);
686
687 if (host->dmar_fixup)
688 host->dmar_fixup(host, mrq->cmd, data, addr);
689
690 /*
691 * If we have a valid SD card in the slot, we set the response
692 * bit mask to check for CRC errors and timeouts only.
693 * Otherwise, use the default power reset value.
694 */
695 if (mmc_card_sd(mmc->card))
696 writeq(0x00b00000ull, host->base + MIO_EMM_STS_MASK(host));
697 else
698 writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host));
699 writeq(emm_dma, host->base + MIO_EMM_DMA(host));
700 return;
701
702 error:
703 mrq->cmd->error = -EINVAL;
704 if (mrq->done)
705 mrq->done(mrq);
706 host->release_bus(host);
707 }
708
709 static void do_read_request(struct cvm_mmc_host *host, struct mmc_request *mrq)
710 {
711 sg_miter_start(&host->smi, mrq->data->sg, mrq->data->sg_len,
712 SG_MITER_ATOMIC | SG_MITER_TO_SG);
713 }
714
715 static void do_write_request(struct cvm_mmc_host *host, struct mmc_request *mrq)
716 {
717 unsigned int data_len = mrq->data->blocks * mrq->data->blksz;
718 struct sg_mapping_iter *smi = &host->smi;
719 unsigned int bytes_xfered;
720 int shift = 56;
721 u64 dat = 0;
722
723 /* Copy data to the xmit buffer before issuing the command. */
724 sg_miter_start(smi, mrq->data->sg, mrq->data->sg_len, SG_MITER_FROM_SG);
725
726 /* Auto inc from offset zero, dbuf zero */
727 writeq(0x10000ull, host->base + MIO_EMM_BUF_IDX(host));
728
729 for (bytes_xfered = 0; bytes_xfered < data_len;) {
730 if (smi->consumed >= smi->length) {
731 if (!sg_miter_next(smi))
732 break;
733 smi->consumed = 0;
734 }
735
736 while (smi->consumed < smi->length && shift >= 0) {
737 dat |= (u64)((u8 *)smi->addr)[smi->consumed] << shift;
738 bytes_xfered++;
739 smi->consumed++;
740 shift -= 8;
741 }
742
743 if (shift < 0) {
744 writeq(dat, host->base + MIO_EMM_BUF_DAT(host));
745 shift = 56;
746 dat = 0;
747 }
748 }
749 sg_miter_stop(smi);
750 }
751
752 static void cvm_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
753 {
754 struct cvm_mmc_slot *slot = mmc_priv(mmc);
755 struct cvm_mmc_host *host = slot->host;
756 struct mmc_command *cmd = mrq->cmd;
757 struct cvm_mmc_cr_mods mods;
758 u64 emm_cmd, rsp_sts;
759 int retries = 100;
760
761 /*
762 * Note about locking:
763 * All MMC devices share the same bus and controller. Allow only a
764 * single user of the bootbus/MMC bus at a time. The lock is acquired
765 * on all entry points from the MMC layer.
766 *
767 * For requests the lock is only released after the completion
768 * interrupt!
769 */
770 host->acquire_bus(host);
771
772 if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
773 cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
774 return cvm_mmc_dma_request(mmc, mrq);
775
776 cvm_mmc_switch_to(slot);
777
778 mods = cvm_mmc_get_cr_mods(cmd);
779
780 WARN_ON(host->current_req);
781 host->current_req = mrq;
782
783 if (cmd->data) {
784 if (cmd->data->flags & MMC_DATA_READ)
785 do_read_request(host, mrq);
786 else
787 do_write_request(host, mrq);
788
789 if (cmd->data->timeout_ns)
790 set_wdog(slot, cmd->data->timeout_ns);
791 } else
792 set_wdog(slot, 0);
793
794 host->dma_active = false;
795 host->int_enable(host, MIO_EMM_INT_CMD_DONE | MIO_EMM_INT_CMD_ERR);
796
797 emm_cmd = FIELD_PREP(MIO_EMM_CMD_VAL, 1) |
798 FIELD_PREP(MIO_EMM_CMD_CTYPE_XOR, mods.ctype_xor) |
799 FIELD_PREP(MIO_EMM_CMD_RTYPE_XOR, mods.rtype_xor) |
800 FIELD_PREP(MIO_EMM_CMD_IDX, cmd->opcode) |
801 FIELD_PREP(MIO_EMM_CMD_ARG, cmd->arg);
802 set_bus_id(&emm_cmd, slot->bus_id);
803 if (cmd->data && mmc_cmd_type(cmd) == MMC_CMD_ADTC)
804 emm_cmd |= FIELD_PREP(MIO_EMM_CMD_OFFSET,
805 64 - ((cmd->data->blocks * cmd->data->blksz) / 8));
806
807 writeq(0, host->base + MIO_EMM_STS_MASK(host));
808
809 retry:
810 rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
811 if (rsp_sts & MIO_EMM_RSP_STS_DMA_VAL ||
812 rsp_sts & MIO_EMM_RSP_STS_CMD_VAL ||
813 rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL ||
814 rsp_sts & MIO_EMM_RSP_STS_DMA_PEND) {
815 udelay(10);
816 if (--retries)
817 goto retry;
818 }
819 if (!retries)
820 dev_err(host->dev, "Bad status: %llx before command write\n", rsp_sts);
821 writeq(emm_cmd, host->base + MIO_EMM_CMD(host));
822 }
823
824 static void cvm_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
825 {
826 struct cvm_mmc_slot *slot = mmc_priv(mmc);
827 struct cvm_mmc_host *host = slot->host;
828 int clk_period = 0, power_class = 10, bus_width = 0;
829 u64 clock, emm_switch;
830
831 host->acquire_bus(host);
832 cvm_mmc_switch_to(slot);
833
834 /* Set the power state */
835 switch (ios->power_mode) {
836 case MMC_POWER_ON:
837 break;
838
839 case MMC_POWER_OFF:
840 cvm_mmc_reset_bus(slot);
841 if (host->global_pwr_gpiod)
842 host->set_shared_power(host, 0);
843 else if (!IS_ERR(mmc->supply.vmmc))
844 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
845 break;
846
847 case MMC_POWER_UP:
848 if (host->global_pwr_gpiod)
849 host->set_shared_power(host, 1);
850 else if (!IS_ERR(mmc->supply.vmmc))
851 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
852 break;
853 }
854
855 /* Convert bus width to HW definition */
856 switch (ios->bus_width) {
857 case MMC_BUS_WIDTH_8:
858 bus_width = 2;
859 break;
860 case MMC_BUS_WIDTH_4:
861 bus_width = 1;
862 break;
863 case MMC_BUS_WIDTH_1:
864 bus_width = 0;
865 break;
866 }
867
868 /* DDR is available for 4/8 bit bus width */
869 if (ios->bus_width && ios->timing == MMC_TIMING_MMC_DDR52)
870 bus_width |= 4;
871
872 /* Change the clock frequency. */
873 clock = ios->clock;
874 if (clock > 52000000)
875 clock = 52000000;
876 slot->clock = clock;
877
878 if (clock)
879 clk_period = (host->sys_freq + clock - 1) / (2 * clock);
880
881 emm_switch = FIELD_PREP(MIO_EMM_SWITCH_HS_TIMING,
882 (ios->timing == MMC_TIMING_MMC_HS)) |
883 FIELD_PREP(MIO_EMM_SWITCH_BUS_WIDTH, bus_width) |
884 FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, power_class) |
885 FIELD_PREP(MIO_EMM_SWITCH_CLK_HI, clk_period) |
886 FIELD_PREP(MIO_EMM_SWITCH_CLK_LO, clk_period);
887 set_bus_id(&emm_switch, slot->bus_id);
888
889 if (!switch_val_changed(slot, emm_switch))
890 goto out;
891
892 set_wdog(slot, 0);
893 do_switch(host, emm_switch);
894 slot->cached_switch = emm_switch;
895 out:
896 host->release_bus(host);
897 }
898
899 static const struct mmc_host_ops cvm_mmc_ops = {
900 .request = cvm_mmc_request,
901 .set_ios = cvm_mmc_set_ios,
902 .get_ro = mmc_gpio_get_ro,
903 .get_cd = mmc_gpio_get_cd,
904 };
905
906 static void cvm_mmc_set_clock(struct cvm_mmc_slot *slot, unsigned int clock)
907 {
908 struct mmc_host *mmc = slot->mmc;
909
910 clock = min(clock, mmc->f_max);
911 clock = max(clock, mmc->f_min);
912 slot->clock = clock;
913 }
914
915 static int cvm_mmc_init_lowlevel(struct cvm_mmc_slot *slot)
916 {
917 struct cvm_mmc_host *host = slot->host;
918 u64 emm_switch;
919
920 /* Enable this bus slot. */
921 host->emm_cfg |= (1ull << slot->bus_id);
922 writeq(host->emm_cfg, slot->host->base + MIO_EMM_CFG(host));
923 udelay(10);
924
925 /* Program initial clock speed and power. */
926 cvm_mmc_set_clock(slot, slot->mmc->f_min);
927 emm_switch = FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, 10);
928 emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_HI,
929 (host->sys_freq / slot->clock) / 2);
930 emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_LO,
931 (host->sys_freq / slot->clock) / 2);
932
933 /* Make the changes take effect on this bus slot. */
934 set_bus_id(&emm_switch, slot->bus_id);
935 do_switch(host, emm_switch);
936
937 slot->cached_switch = emm_switch;
938
939 /*
940 * Set watchdog timeout value and default reset value
941 * for the mask register. Finally, set the CARD_RCA
942 * bit so that we can get the card address relative
943 * to the CMD register for CMD7 transactions.
944 */
945 set_wdog(slot, 0);
946 writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host));
947 writeq(1, host->base + MIO_EMM_RCA(host));
948 return 0;
949 }
950
951 static int cvm_mmc_of_parse(struct device *dev, struct cvm_mmc_slot *slot)
952 {
953 u32 id, cmd_skew = 0, dat_skew = 0, bus_width = 0;
954 struct device_node *node = dev->of_node;
955 struct mmc_host *mmc = slot->mmc;
956 u64 clock_period;
957 int ret;
958
959 ret = of_property_read_u32(node, "reg", &id);
960 if (ret) {
961 dev_err(dev, "Missing or invalid reg property on %pOF\n", node);
962 return ret;
963 }
964
965 if (id >= CAVIUM_MAX_MMC || slot->host->slot[id]) {
966 dev_err(dev, "Invalid reg property on %pOF\n", node);
967 return -EINVAL;
968 }
969
970 ret = mmc_regulator_get_supply(mmc);
971 if (ret)
972 return ret;
973 /*
974 * Legacy Octeon firmware has no regulator entry, fall-back to
975 * a hard-coded voltage to get a sane OCR.
976 */
977 if (IS_ERR(mmc->supply.vmmc))
978 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
979
980 /* Common MMC bindings */
981 ret = mmc_of_parse(mmc);
982 if (ret)
983 return ret;
984
985 /* Set bus width */
986 if (!(mmc->caps & (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA))) {
987 of_property_read_u32(node, "cavium,bus-max-width", &bus_width);
988 if (bus_width == 8)
989 mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
990 else if (bus_width == 4)
991 mmc->caps |= MMC_CAP_4_BIT_DATA;
992 }
993
994 /* Set maximum and minimum frequency */
995 if (!mmc->f_max)
996 of_property_read_u32(node, "spi-max-frequency", &mmc->f_max);
997 if (!mmc->f_max || mmc->f_max > 52000000)
998 mmc->f_max = 52000000;
999 mmc->f_min = 400000;
1000
1001 /* Sampling register settings, period in picoseconds */
1002 clock_period = 1000000000000ull / slot->host->sys_freq;
1003 of_property_read_u32(node, "cavium,cmd-clk-skew", &cmd_skew);
1004 of_property_read_u32(node, "cavium,dat-clk-skew", &dat_skew);
1005 slot->cmd_cnt = (cmd_skew + clock_period / 2) / clock_period;
1006 slot->dat_cnt = (dat_skew + clock_period / 2) / clock_period;
1007
1008 return id;
1009 }
1010
1011 int cvm_mmc_of_slot_probe(struct device *dev, struct cvm_mmc_host *host)
1012 {
1013 struct cvm_mmc_slot *slot;
1014 struct mmc_host *mmc;
1015 int ret, id;
1016
1017 mmc = mmc_alloc_host(sizeof(struct cvm_mmc_slot), dev);
1018 if (!mmc)
1019 return -ENOMEM;
1020
1021 slot = mmc_priv(mmc);
1022 slot->mmc = mmc;
1023 slot->host = host;
1024
1025 ret = cvm_mmc_of_parse(dev, slot);
1026 if (ret < 0)
1027 goto error;
1028 id = ret;
1029
1030 /* Set up host parameters */
1031 mmc->ops = &cvm_mmc_ops;
1032
1033 /*
1034 * We only have a 3.3v supply, we cannot support any
1035 * of the UHS modes. We do support the high speed DDR
1036 * modes up to 52MHz.
1037 *
1038 * Disable bounce buffers for max_segs = 1
1039 */
1040 mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
1041 MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_POWER_OFF_CARD |
1042 MMC_CAP_3_3V_DDR;
1043
1044 if (host->use_sg)
1045 mmc->max_segs = 16;
1046 else
1047 mmc->max_segs = 1;
1048
1049 /* DMA size field can address up to 8 MB */
1050 mmc->max_seg_size = min_t(unsigned int, 8 * 1024 * 1024,
1051 dma_get_max_seg_size(host->dev));
1052 mmc->max_req_size = mmc->max_seg_size;
1053 /* External DMA is in 512 byte blocks */
1054 mmc->max_blk_size = 512;
1055 /* DMA block count field is 15 bits */
1056 mmc->max_blk_count = 32767;
1057
1058 slot->clock = mmc->f_min;
1059 slot->bus_id = id;
1060 slot->cached_rca = 1;
1061
1062 host->acquire_bus(host);
1063 host->slot[id] = slot;
1064 cvm_mmc_switch_to(slot);
1065 cvm_mmc_init_lowlevel(slot);
1066 host->release_bus(host);
1067
1068 ret = mmc_add_host(mmc);
1069 if (ret) {
1070 dev_err(dev, "mmc_add_host() returned %d\n", ret);
1071 slot->host->slot[id] = NULL;
1072 goto error;
1073 }
1074 return 0;
1075
1076 error:
1077 mmc_free_host(slot->mmc);
1078 return ret;
1079 }
1080
1081 int cvm_mmc_of_slot_remove(struct cvm_mmc_slot *slot)
1082 {
1083 mmc_remove_host(slot->mmc);
1084 slot->host->slot[slot->bus_id] = NULL;
1085 mmc_free_host(slot->mmc);
1086 return 0;
1087 }
Linux with added FPC-III support