2 * Boot code and exception vectors for Book3E processors
4 * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #include <linux/threads.h>
15 #include <asm/ppc_asm.h>
16 #include <asm/asm-offsets.h>
17 #include <asm/cputable.h>
18 #include <asm/setup.h>
19 #include <asm/thread_info.h>
20 #include <asm/reg_a2.h>
21 #include <asm/exception-64e.h>
23 #include <asm/irqflags.h>
24 #include <asm/ptrace.h>
25 #include <asm/ppc-opcode.h>
27 #include <asm/hw_irq.h>
28 #include <asm/kvm_asm.h>
29 #include <asm/kvm_booke_hv_asm.h>
31 /* XXX This will ultimately add space for a special exception save
32 * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
33 * when taking special interrupts. For now we don't support that,
34 * special interrupts from within a non-standard level will probably
37 #define SPECIAL_EXC_SRR0 0
38 #define SPECIAL_EXC_SRR1 1
39 #define SPECIAL_EXC_SPRG_GEN 2
40 #define SPECIAL_EXC_SPRG_TLB 3
41 #define SPECIAL_EXC_MAS0 4
42 #define SPECIAL_EXC_MAS1 5
43 #define SPECIAL_EXC_MAS2 6
44 #define SPECIAL_EXC_MAS3 7
45 #define SPECIAL_EXC_MAS6 8
46 #define SPECIAL_EXC_MAS7 9
47 #define SPECIAL_EXC_MAS5 10 /* E.HV only */
48 #define SPECIAL_EXC_MAS8 11 /* E.HV only */
49 #define SPECIAL_EXC_IRQHAPPENED 12
50 #define SPECIAL_EXC_DEAR 13
51 #define SPECIAL_EXC_ESR 14
52 #define SPECIAL_EXC_SOFTE 15
53 #define SPECIAL_EXC_CSRR0 16
54 #define SPECIAL_EXC_CSRR1 17
55 /* must be even to keep 16-byte stack alignment */
56 #define SPECIAL_EXC_END 18
58 #define SPECIAL_EXC_FRAME_SIZE (INT_FRAME_SIZE + SPECIAL_EXC_END * 8)
59 #define SPECIAL_EXC_FRAME_OFFS (INT_FRAME_SIZE - 288)
61 #define SPECIAL_EXC_STORE(reg, name) \
62 std reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1)
64 #define SPECIAL_EXC_LOAD(reg, name) \
65 ld reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1)
68 lbz r9,PACAIRQHAPPENED(r13)
69 RECONCILE_IRQ_STATE(r3,r4)
72 * We only need (or have stack space) to save this stuff if
73 * we interrupted the kernel.
79 /* Copy info into temporary exception thread info */
81 CURRENT_THREAD_INFO(r11, r11)
82 CURRENT_THREAD_INFO(r12, r1)
85 ld r10,TI_PREEMPT(r11)
86 std r10,TI_PREEMPT(r12)
91 * Advance to the next TLB exception frame for handler
92 * types that don't do it automatically.
94 LOAD_REG_ADDR(r11,extlb_level_exc)
96 mfspr r10,SPRN_SPRG_TLB_EXFRAME
98 mtspr SPRN_SPRG_TLB_EXFRAME,r10
101 * Save registers needed to allow nesting of certain exceptions
102 * (such as TLB misses) inside special exception levels
105 SPECIAL_EXC_STORE(r10,SRR0)
107 SPECIAL_EXC_STORE(r10,SRR1)
108 mfspr r10,SPRN_SPRG_GEN_SCRATCH
109 SPECIAL_EXC_STORE(r10,SPRG_GEN)
110 mfspr r10,SPRN_SPRG_TLB_SCRATCH
111 SPECIAL_EXC_STORE(r10,SPRG_TLB)
113 SPECIAL_EXC_STORE(r10,MAS0)
115 SPECIAL_EXC_STORE(r10,MAS1)
117 SPECIAL_EXC_STORE(r10,MAS2)
119 SPECIAL_EXC_STORE(r10,MAS3)
121 SPECIAL_EXC_STORE(r10,MAS6)
123 SPECIAL_EXC_STORE(r10,MAS7)
126 SPECIAL_EXC_STORE(r10,MAS5)
128 SPECIAL_EXC_STORE(r10,MAS8)
130 /* MAS5/8 could have inappropriate values if we interrupted KVM code */
134 END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
135 SPECIAL_EXC_STORE(r9,IRQHAPPENED)
138 SPECIAL_EXC_STORE(r10,DEAR)
140 SPECIAL_EXC_STORE(r10,ESR)
142 lbz r10,PACASOFTIRQEN(r13)
143 SPECIAL_EXC_STORE(r10,SOFTE)
145 SPECIAL_EXC_STORE(r10,CSRR0)
147 SPECIAL_EXC_STORE(r10,CSRR1)
151 ret_from_level_except:
158 LOAD_REG_ADDR(r11,extlb_level_exc)
160 mfspr r10,SPRN_SPRG_TLB_EXFRAME
162 mtspr SPRN_SPRG_TLB_EXFRAME,r10
165 * It's possible that the special level exception interrupted a
166 * TLB miss handler, and inserted the same entry that the
167 * interrupted handler was about to insert. On CPUs without TLB
168 * write conditional, this can result in a duplicate TLB entry.
169 * Wipe all non-bolted entries to be safe.
171 * Note that this doesn't protect against any TLB misses
172 * we may take accessing the stack from here to the end of
173 * the special level exception. It's not clear how we can
174 * reasonably protect against that, but only CPUs with
175 * neither TLB write conditional nor bolted kernel memory
176 * are affected. Do any such CPUs even exist?
182 SPECIAL_EXC_LOAD(r10,SRR0)
184 SPECIAL_EXC_LOAD(r10,SRR1)
186 SPECIAL_EXC_LOAD(r10,SPRG_GEN)
187 mtspr SPRN_SPRG_GEN_SCRATCH,r10
188 SPECIAL_EXC_LOAD(r10,SPRG_TLB)
189 mtspr SPRN_SPRG_TLB_SCRATCH,r10
190 SPECIAL_EXC_LOAD(r10,MAS0)
192 SPECIAL_EXC_LOAD(r10,MAS1)
194 SPECIAL_EXC_LOAD(r10,MAS2)
196 SPECIAL_EXC_LOAD(r10,MAS3)
198 SPECIAL_EXC_LOAD(r10,MAS6)
200 SPECIAL_EXC_LOAD(r10,MAS7)
203 SPECIAL_EXC_LOAD(r10,MAS5)
205 SPECIAL_EXC_LOAD(r10,MAS8)
207 END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
209 lbz r6,PACASOFTIRQEN(r13)
212 /* Interrupts had better not already be enabled... */
219 stb r5,PACASOFTIRQEN(r13)
222 * Restore PACAIRQHAPPENED rather than setting it based on
223 * the return MSR[EE], since we could have interrupted
224 * __check_irq_replay() or other inconsistent transitory
225 * states that must remain that way.
227 SPECIAL_EXC_LOAD(r10,IRQHAPPENED)
228 stb r10,PACAIRQHAPPENED(r13)
230 SPECIAL_EXC_LOAD(r10,DEAR)
232 SPECIAL_EXC_LOAD(r10,ESR)
235 stdcx. r0,0,r1 /* to clear the reservation */
247 .macro ret_from_level srr0 srr1 paca_ex scratch
248 bl ret_from_level_except
261 std r10,\paca_ex+EX_R10(r13);
262 std r11,\paca_ex+EX_R11(r13);
269 ld r10,\paca_ex+EX_R10(r13)
270 ld r11,\paca_ex+EX_R11(r13)
274 ret_from_crit_except:
275 ret_from_level SPRN_CSRR0 SPRN_CSRR1 PACA_EXCRIT SPRN_SPRG_CRIT_SCRATCH
279 ret_from_level SPRN_MCSRR0 SPRN_MCSRR1 PACA_EXMC SPRN_SPRG_MC_SCRATCH
282 /* Exception prolog code for all exceptions */
283 #define EXCEPTION_PROLOG(n, intnum, type, addition) \
284 mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \
285 mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \
286 std r10,PACA_EX##type+EX_R10(r13); \
287 std r11,PACA_EX##type+EX_R11(r13); \
288 mfcr r10; /* save CR */ \
289 mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \
290 DO_KVM intnum,SPRN_##type##_SRR1; /* KVM hook */ \
291 stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
292 addition; /* additional code for that exc. */ \
293 std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \
294 type##_SET_KSTACK; /* get special stack if necessary */\
295 andi. r10,r11,MSR_PR; /* save stack pointer */ \
296 beq 1f; /* branch around if supervisor */ \
297 ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\
298 1: cmpdi cr1,r1,0; /* check if SP makes sense */ \
299 bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
300 mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */
302 /* Exception type-specific macros */
303 #define GEN_SET_KSTACK \
304 subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */
305 #define SPRN_GEN_SRR0 SPRN_SRR0
306 #define SPRN_GEN_SRR1 SPRN_SRR1
308 #define GDBELL_SET_KSTACK GEN_SET_KSTACK
309 #define SPRN_GDBELL_SRR0 SPRN_GSRR0
310 #define SPRN_GDBELL_SRR1 SPRN_GSRR1
312 #define CRIT_SET_KSTACK \
313 ld r1,PACA_CRIT_STACK(r13); \
314 subi r1,r1,SPECIAL_EXC_FRAME_SIZE
315 #define SPRN_CRIT_SRR0 SPRN_CSRR0
316 #define SPRN_CRIT_SRR1 SPRN_CSRR1
318 #define DBG_SET_KSTACK \
319 ld r1,PACA_DBG_STACK(r13); \
320 subi r1,r1,SPECIAL_EXC_FRAME_SIZE
321 #define SPRN_DBG_SRR0 SPRN_DSRR0
322 #define SPRN_DBG_SRR1 SPRN_DSRR1
324 #define MC_SET_KSTACK \
325 ld r1,PACA_MC_STACK(r13); \
326 subi r1,r1,SPECIAL_EXC_FRAME_SIZE
327 #define SPRN_MC_SRR0 SPRN_MCSRR0
328 #define SPRN_MC_SRR1 SPRN_MCSRR1
330 #define NORMAL_EXCEPTION_PROLOG(n, intnum, addition) \
331 EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n))
333 #define CRIT_EXCEPTION_PROLOG(n, intnum, addition) \
334 EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n))
336 #define DBG_EXCEPTION_PROLOG(n, intnum, addition) \
337 EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n))
339 #define MC_EXCEPTION_PROLOG(n, intnum, addition) \
340 EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n))
342 #define GDBELL_EXCEPTION_PROLOG(n, intnum, addition) \
343 EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n))
345 /* Variants of the "addition" argument for the prolog
347 #define PROLOG_ADDITION_NONE_GEN(n)
348 #define PROLOG_ADDITION_NONE_GDBELL(n)
349 #define PROLOG_ADDITION_NONE_CRIT(n)
350 #define PROLOG_ADDITION_NONE_DBG(n)
351 #define PROLOG_ADDITION_NONE_MC(n)
353 #define PROLOG_ADDITION_MASKABLE_GEN(n) \
354 lbz r10,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \
355 cmpwi cr0,r10,0; /* yes -> go out of line */ \
356 beq masked_interrupt_book3e_##n
358 #define PROLOG_ADDITION_2REGS_GEN(n) \
359 std r14,PACA_EXGEN+EX_R14(r13); \
360 std r15,PACA_EXGEN+EX_R15(r13)
362 #define PROLOG_ADDITION_1REG_GEN(n) \
363 std r14,PACA_EXGEN+EX_R14(r13);
365 #define PROLOG_ADDITION_2REGS_CRIT(n) \
366 std r14,PACA_EXCRIT+EX_R14(r13); \
367 std r15,PACA_EXCRIT+EX_R15(r13)
369 #define PROLOG_ADDITION_2REGS_DBG(n) \
370 std r14,PACA_EXDBG+EX_R14(r13); \
371 std r15,PACA_EXDBG+EX_R15(r13)
373 #define PROLOG_ADDITION_2REGS_MC(n) \
374 std r14,PACA_EXMC+EX_R14(r13); \
375 std r15,PACA_EXMC+EX_R15(r13)
378 /* Core exception code for all exceptions except TLB misses. */
379 #define EXCEPTION_COMMON_LVL(n, scratch, excf) \
381 std r0,GPR0(r1); /* save r0 in stackframe */ \
382 std r2,GPR2(r1); /* save r2 in stackframe */ \
383 SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
384 SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
385 std r9,GPR9(r1); /* save r9 in stackframe */ \
386 std r10,_NIP(r1); /* save SRR0 to stackframe */ \
387 std r11,_MSR(r1); /* save SRR1 to stackframe */ \
388 beq 2f; /* if from kernel mode */ \
389 ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \
390 2: ld r3,excf+EX_R10(r13); /* get back r10 */ \
391 ld r4,excf+EX_R11(r13); /* get back r11 */ \
392 mfspr r5,scratch; /* get back r13 */ \
393 std r12,GPR12(r1); /* save r12 in stackframe */ \
394 ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
395 mflr r6; /* save LR in stackframe */ \
396 mfctr r7; /* save CTR in stackframe */ \
397 mfspr r8,SPRN_XER; /* save XER in stackframe */ \
398 ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \
399 lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \
400 lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \
401 ld r12,exception_marker@toc(r2); \
403 std r3,GPR10(r1); /* save r10 to stackframe */ \
404 std r4,GPR11(r1); /* save r11 to stackframe */ \
405 std r5,GPR13(r1); /* save it to stackframe */ \
409 li r3,(n)+1; /* indicate partial regs in trap */ \
410 std r9,0(r1); /* store stack frame back link */ \
411 std r10,_CCR(r1); /* store orig CR in stackframe */ \
412 std r9,GPR1(r1); /* store stack frame back link */ \
413 std r11,SOFTE(r1); /* and save it to stackframe */ \
414 std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \
415 std r3,_TRAP(r1); /* set trap number */ \
416 std r0,RESULT(r1); /* clear regs->result */
418 #define EXCEPTION_COMMON(n) \
419 EXCEPTION_COMMON_LVL(n, SPRN_SPRG_GEN_SCRATCH, PACA_EXGEN)
420 #define EXCEPTION_COMMON_CRIT(n) \
421 EXCEPTION_COMMON_LVL(n, SPRN_SPRG_CRIT_SCRATCH, PACA_EXCRIT)
422 #define EXCEPTION_COMMON_MC(n) \
423 EXCEPTION_COMMON_LVL(n, SPRN_SPRG_MC_SCRATCH, PACA_EXMC)
424 #define EXCEPTION_COMMON_DBG(n) \
425 EXCEPTION_COMMON_LVL(n, SPRN_SPRG_DBG_SCRATCH, PACA_EXDBG)
428 * This is meant for exceptions that don't immediately hard-enable. We
429 * set a bit in paca->irq_happened to ensure that a subsequent call to
430 * arch_local_irq_restore() will properly hard-enable and avoid the
431 * fast-path, and then reconcile irq state.
433 #define INTS_DISABLE RECONCILE_IRQ_STATE(r3,r4)
436 * This is called by exceptions that don't use INTS_DISABLE (that did not
437 * touch irq indicators in the PACA). This will restore MSR:EE to it's
440 * XXX In the long run, we may want to open-code it in order to separate the
441 * load from the wrtee, thus limiting the latency caused by the dependency
442 * but at this point, I'll favor code clarity until we have a near to final
445 #define INTS_RESTORE_HARD \
449 /* XXX FIXME: Restore r14/r15 when necessary */
450 #define BAD_STACK_TRAMPOLINE(n) \
451 exc_##n##_bad_stack: \
452 li r1,(n); /* get exception number */ \
453 sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \
454 b bad_stack_book3e; /* bad stack error */
456 /* WARNING: If you change the layout of this stub, make sure you chcek
457 * the debug exception handler which handles single stepping
458 * into exceptions from userspace, and the MM code in
459 * arch/powerpc/mm/tlb_nohash.c which patches the branch here
460 * and would need to be updated if that branch is moved
462 #define EXCEPTION_STUB(loc, label) \
463 . = interrupt_base_book3e + loc; \
464 nop; /* To make debug interrupts happy */ \
465 b exc_##label##_book3e;
475 /* Used by asynchronous interrupt that may happen in the idle loop.
477 * This check if the thread was in the idle loop, and if yes, returns
478 * to the caller rather than the PC. This is to avoid a race if
479 * interrupts happen before the wait instruction.
481 #define CHECK_NAPPING() \
482 CURRENT_THREAD_INFO(r11, r1); \
483 ld r10,TI_LOCAL_FLAGS(r11); \
484 andi. r9,r10,_TLF_NAPPING; \
487 rlwinm r7,r10,0,~_TLF_NAPPING; \
489 std r7,TI_LOCAL_FLAGS(r11); \
493 #define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack) \
494 START_EXCEPTION(label); \
495 NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\
496 EXCEPTION_COMMON(trapnum) \
500 addi r3,r1,STACK_FRAME_OVERHEAD; \
502 b .ret_from_except_lite;
504 /* This value is used to mark exception frames on the stack. */
507 .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
511 * And here we have the exception vectors !
516 .globl interrupt_base_book3e
517 interrupt_base_book3e: /* fake trap */
518 EXCEPTION_STUB(0x000, machine_check)
519 EXCEPTION_STUB(0x020, critical_input) /* 0x0100 */
520 EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */
521 EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */
522 EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */
523 EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */
524 EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */
525 EXCEPTION_STUB(0x0e0, program) /* 0x0700 */
526 EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */
527 EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */
528 EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */
529 EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */
530 EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */
531 EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */
532 EXCEPTION_STUB(0x1c0, data_tlb_miss)
533 EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
534 EXCEPTION_STUB(0x200, altivec_unavailable)
535 EXCEPTION_STUB(0x220, altivec_assist)
536 EXCEPTION_STUB(0x260, perfmon)
537 EXCEPTION_STUB(0x280, doorbell)
538 EXCEPTION_STUB(0x2a0, doorbell_crit)
539 EXCEPTION_STUB(0x2c0, guest_doorbell)
540 EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
541 EXCEPTION_STUB(0x300, hypercall)
542 EXCEPTION_STUB(0x320, ehpriv)
543 EXCEPTION_STUB(0x340, lrat_error)
545 .globl interrupt_end_book3e
546 interrupt_end_book3e:
548 /* Critical Input Interrupt */
549 START_EXCEPTION(critical_input);
550 CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL,
551 PROLOG_ADDITION_NONE)
552 EXCEPTION_COMMON_CRIT(0x100)
556 addi r3,r1,STACK_FRAME_OVERHEAD
557 bl .unknown_exception
558 b ret_from_crit_except
560 /* Machine Check Interrupt */
561 START_EXCEPTION(machine_check);
562 MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK,
563 PROLOG_ADDITION_NONE)
564 EXCEPTION_COMMON_MC(0x000)
568 addi r3,r1,STACK_FRAME_OVERHEAD
569 bl .machine_check_exception
572 /* Data Storage Interrupt */
573 START_EXCEPTION(data_storage)
574 NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE,
575 PROLOG_ADDITION_2REGS)
578 EXCEPTION_COMMON(0x300)
580 b storage_fault_common
582 /* Instruction Storage Interrupt */
583 START_EXCEPTION(instruction_storage);
584 NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE,
585 PROLOG_ADDITION_2REGS)
588 EXCEPTION_COMMON(0x400)
590 b storage_fault_common
592 /* External Input Interrupt */
593 MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL,
594 external_input, .do_IRQ, ACK_NONE)
597 START_EXCEPTION(alignment);
598 NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT,
599 PROLOG_ADDITION_2REGS)
602 EXCEPTION_COMMON(0x600)
603 b alignment_more /* no room, go out of line */
605 /* Program Interrupt */
606 START_EXCEPTION(program);
607 NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM,
608 PROLOG_ADDITION_1REG)
610 EXCEPTION_COMMON(0x700)
613 addi r3,r1,STACK_FRAME_OVERHEAD
614 ld r14,PACA_EXGEN+EX_R14(r13)
616 bl .program_check_exception
619 /* Floating Point Unavailable Interrupt */
620 START_EXCEPTION(fp_unavailable);
621 NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL,
622 PROLOG_ADDITION_NONE)
623 /* we can probably do a shorter exception entry for that one... */
624 EXCEPTION_COMMON(0x800)
629 b fast_exception_return
632 addi r3,r1,STACK_FRAME_OVERHEAD
633 bl .kernel_fp_unavailable_exception
636 /* Altivec Unavailable Interrupt */
637 START_EXCEPTION(altivec_unavailable);
638 NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL,
639 PROLOG_ADDITION_NONE)
640 /* we can probably do a shorter exception entry for that one... */
641 EXCEPTION_COMMON(0x200)
642 #ifdef CONFIG_ALTIVEC
648 b fast_exception_return
650 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
654 addi r3,r1,STACK_FRAME_OVERHEAD
655 bl .altivec_unavailable_exception
659 START_EXCEPTION(altivec_assist);
660 NORMAL_EXCEPTION_PROLOG(0x220,
661 BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST,
662 PROLOG_ADDITION_NONE)
663 EXCEPTION_COMMON(0x220)
666 addi r3,r1,STACK_FRAME_OVERHEAD
667 #ifdef CONFIG_ALTIVEC
669 bl .altivec_assist_exception
670 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
672 bl .unknown_exception
677 /* Decrementer Interrupt */
678 MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
679 decrementer, .timer_interrupt, ACK_DEC)
681 /* Fixed Interval Timer Interrupt */
682 MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT,
683 fixed_interval, .unknown_exception, ACK_FIT)
685 /* Watchdog Timer Interrupt */
686 START_EXCEPTION(watchdog);
687 CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG,
688 PROLOG_ADDITION_NONE)
689 EXCEPTION_COMMON_CRIT(0x9f0)
693 addi r3,r1,STACK_FRAME_OVERHEAD
694 #ifdef CONFIG_BOOKE_WDT
695 bl .WatchdogException
697 bl .unknown_exception
699 b ret_from_crit_except
701 /* System Call Interrupt */
702 START_EXCEPTION(system_call)
703 mr r9,r13 /* keep a copy of userland r13 */
704 mfspr r11,SPRN_SRR0 /* get return address */
705 mfspr r12,SPRN_SRR1 /* get previous MSR */
706 mfspr r13,SPRN_SPRG_PACA /* get our PACA */
709 /* Auxiliary Processor Unavailable Interrupt */
710 START_EXCEPTION(ap_unavailable);
711 NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL,
712 PROLOG_ADDITION_NONE)
713 EXCEPTION_COMMON(0xf20)
716 addi r3,r1,STACK_FRAME_OVERHEAD
717 bl .unknown_exception
720 /* Debug exception as a critical interrupt*/
721 START_EXCEPTION(debug_crit);
722 CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
723 PROLOG_ADDITION_2REGS)
726 * If there is a single step or branch-taken exception in an
727 * exception entry sequence, it was probably meant to apply to
728 * the code where the exception occurred (since exception entry
729 * doesn't turn off DE automatically). We simulate the effect
730 * of turning off DE on entry to an exception handler by turning
731 * off DE in the CSRR1 value and clearing the debug status.
734 mfspr r14,SPRN_DBSR /* check single-step/branch taken */
735 andis. r15,r14,(DBSR_IC|DBSR_BT)@h
738 LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
739 LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
745 /* here it looks like we got an inappropriate debug exception. */
746 lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */
747 rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */
750 lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */
751 ld r1,PACA_EXCRIT+EX_R1(r13)
752 ld r14,PACA_EXCRIT+EX_R14(r13)
753 ld r15,PACA_EXCRIT+EX_R15(r13)
755 ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */
756 ld r11,PACA_EXCRIT+EX_R11(r13)
757 mfspr r13,SPRN_SPRG_CRIT_SCRATCH
760 /* Normal debug exception */
761 /* XXX We only handle coming from userspace for now since we can't
762 * quite save properly an interrupted kernel state yet
764 1: andi. r14,r11,MSR_PR; /* check for userspace again */
765 beq kernel_dbg_exc; /* if from kernel mode */
767 /* Now we mash up things to make it look like we are coming on a
771 EXCEPTION_COMMON_CRIT(0xd00)
773 addi r3,r1,STACK_FRAME_OVERHEAD
775 ld r14,PACA_EXCRIT+EX_R14(r13)
776 ld r15,PACA_EXCRIT+EX_R15(r13)
784 /* Debug exception as a debug interrupt*/
785 START_EXCEPTION(debug_debug);
786 DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
787 PROLOG_ADDITION_2REGS)
790 * If there is a single step or branch-taken exception in an
791 * exception entry sequence, it was probably meant to apply to
792 * the code where the exception occurred (since exception entry
793 * doesn't turn off DE automatically). We simulate the effect
794 * of turning off DE on entry to an exception handler by turning
795 * off DE in the DSRR1 value and clearing the debug status.
798 mfspr r14,SPRN_DBSR /* check single-step/branch taken */
799 andis. r15,r14,(DBSR_IC|DBSR_BT)@h
802 LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
803 LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
809 /* here it looks like we got an inappropriate debug exception. */
810 lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */
811 rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */
814 lwz r10,PACA_EXDBG+EX_CR(r13) /* restore registers */
815 ld r1,PACA_EXDBG+EX_R1(r13)
816 ld r14,PACA_EXDBG+EX_R14(r13)
817 ld r15,PACA_EXDBG+EX_R15(r13)
819 ld r10,PACA_EXDBG+EX_R10(r13) /* restore registers */
820 ld r11,PACA_EXDBG+EX_R11(r13)
821 mfspr r13,SPRN_SPRG_DBG_SCRATCH
824 /* Normal debug exception */
825 /* XXX We only handle coming from userspace for now since we can't
826 * quite save properly an interrupted kernel state yet
828 1: andi. r14,r11,MSR_PR; /* check for userspace again */
829 beq kernel_dbg_exc; /* if from kernel mode */
831 /* Now we mash up things to make it look like we are coming on a
835 EXCEPTION_COMMON_DBG(0xd08)
838 addi r3,r1,STACK_FRAME_OVERHEAD
840 ld r14,PACA_EXDBG+EX_R14(r13)
841 ld r15,PACA_EXDBG+EX_R15(r13)
846 START_EXCEPTION(perfmon);
847 NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
848 PROLOG_ADDITION_NONE)
849 EXCEPTION_COMMON(0x260)
852 addi r3,r1,STACK_FRAME_OVERHEAD
853 bl .performance_monitor_exception
854 b .ret_from_except_lite
856 /* Doorbell interrupt */
857 MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
858 doorbell, .doorbell_exception, ACK_NONE)
860 /* Doorbell critical Interrupt */
861 START_EXCEPTION(doorbell_crit);
862 CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL,
863 PROLOG_ADDITION_NONE)
864 EXCEPTION_COMMON_CRIT(0x2a0)
868 addi r3,r1,STACK_FRAME_OVERHEAD
869 bl .unknown_exception
870 b ret_from_crit_except
873 * Guest doorbell interrupt
874 * This general exception use GSRRx save/restore registers
876 START_EXCEPTION(guest_doorbell);
877 GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL,
878 PROLOG_ADDITION_NONE)
879 EXCEPTION_COMMON(0x2c0)
880 addi r3,r1,STACK_FRAME_OVERHEAD
883 bl .unknown_exception
886 /* Guest Doorbell critical Interrupt */
887 START_EXCEPTION(guest_doorbell_crit);
888 CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT,
889 PROLOG_ADDITION_NONE)
890 EXCEPTION_COMMON_CRIT(0x2e0)
894 addi r3,r1,STACK_FRAME_OVERHEAD
895 bl .unknown_exception
896 b ret_from_crit_except
898 /* Hypervisor call */
899 START_EXCEPTION(hypercall);
900 NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL,
901 PROLOG_ADDITION_NONE)
902 EXCEPTION_COMMON(0x310)
903 addi r3,r1,STACK_FRAME_OVERHEAD
906 bl .unknown_exception
909 /* Embedded Hypervisor priviledged */
910 START_EXCEPTION(ehpriv);
911 NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV,
912 PROLOG_ADDITION_NONE)
913 EXCEPTION_COMMON(0x320)
914 addi r3,r1,STACK_FRAME_OVERHEAD
917 bl .unknown_exception
920 /* LRAT Error interrupt */
921 START_EXCEPTION(lrat_error);
922 NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR,
923 PROLOG_ADDITION_NONE)
924 EXCEPTION_COMMON(0x340)
925 addi r3,r1,STACK_FRAME_OVERHEAD
928 bl .unknown_exception
932 * An interrupt came in while soft-disabled; We mark paca->irq_happened
933 * accordingly and if the interrupt is level sensitive, we hard disable
936 .macro masked_interrupt_book3e paca_irq full_mask
937 lbz r10,PACAIRQHAPPENED(r13)
938 ori r10,r10,\paca_irq
939 stb r10,PACAIRQHAPPENED(r13)
942 rldicl r10,r11,48,1 /* clear MSR_EE */
947 lwz r11,PACA_EXGEN+EX_CR(r13)
949 ld r10,PACA_EXGEN+EX_R10(r13)
950 ld r11,PACA_EXGEN+EX_R11(r13)
951 mfspr r13,SPRN_SPRG_GEN_SCRATCH
956 masked_interrupt_book3e_0x500:
957 // XXX When adding support for EPR, use PACA_IRQ_EE_EDGE
958 masked_interrupt_book3e PACA_IRQ_EE 1
960 masked_interrupt_book3e_0x900:
962 masked_interrupt_book3e PACA_IRQ_DEC 0
964 masked_interrupt_book3e_0x980:
966 masked_interrupt_book3e PACA_IRQ_DEC 0
968 masked_interrupt_book3e_0x280:
969 masked_interrupt_book3e_0x2c0:
970 masked_interrupt_book3e PACA_IRQ_DBELL 0
973 * Called from arch_local_irq_enable when an interrupt needs
974 * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280
975 * to indicate the kind of interrupt. MSR:EE is already off.
976 * We generate a stackframe like if a real interrupt had happened.
978 * Note: While MSR:EE is off, we need to make sure that _MSR
979 * in the generated frame has EE set to 1 or the exception
980 * handler will not properly re-enable them.
982 _GLOBAL(__replay_interrupt)
983 /* We are going to jump to the exception common code which
984 * will retrieve various register values from the PACA which
985 * we don't give a damn about.
990 mtspr SPRN_SPRG_GEN_SCRATCH,r13;
991 std r1,PACA_EXGEN+EX_R1(r13);
992 stw r4,PACA_EXGEN+EX_CR(r13);
994 subi r1,r1,INT_FRAME_SIZE;
1000 beq exc_0x280_common
1005 * This is called from 0x300 and 0x400 handlers after the prologs with
1006 * r14 and r15 containing the fault address and error code, with the
1007 * original values stashed away in the PACA
1009 storage_fault_common:
1012 addi r3,r1,STACK_FRAME_OVERHEAD
1015 ld r14,PACA_EXGEN+EX_R14(r13)
1016 ld r15,PACA_EXGEN+EX_R15(r13)
1020 b .ret_from_except_lite
1023 addi r3,r1,STACK_FRAME_OVERHEAD
1029 * Alignment exception doesn't fit entirely in the 0x100 bytes so it
1035 addi r3,r1,STACK_FRAME_OVERHEAD
1036 ld r14,PACA_EXGEN+EX_R14(r13)
1037 ld r15,PACA_EXGEN+EX_R15(r13)
1040 bl .alignment_exception
1044 * We branch here from entry_64.S for the last stage of the exception
1045 * return code path. MSR:EE is expected to be off at that point
1047 _GLOBAL(exception_return_book3e)
1050 /* This is the return from load_up_fpu fast path which could do with
1051 * less GPR restores in fact, but for now we have a single return path
1053 .globl fast_exception_return
1054 fast_exception_return:
1062 ACCOUNT_CPU_USER_EXIT(r10, r11)
1065 1: stdcx. r0,0,r1 /* to clear the reservation */
1079 mtspr SPRN_SPRG_GEN_SCRATCH,r0
1081 std r10,PACA_EXGEN+EX_R10(r13);
1082 std r11,PACA_EXGEN+EX_R11(r13);
1089 ld r10,PACA_EXGEN+EX_R10(r13)
1090 ld r11,PACA_EXGEN+EX_R11(r13)
1091 mfspr r13,SPRN_SPRG_GEN_SCRATCH
1095 * Trampolines used when spotting a bad kernel stack pointer in
1096 * the exception entry code.
1098 * TODO: move some bits like SRR0 read to trampoline, pass PACA
1099 * index around, etc... to handle crit & mcheck
1101 BAD_STACK_TRAMPOLINE(0x000)
1102 BAD_STACK_TRAMPOLINE(0x100)
1103 BAD_STACK_TRAMPOLINE(0x200)
1104 BAD_STACK_TRAMPOLINE(0x220)
1105 BAD_STACK_TRAMPOLINE(0x260)
1106 BAD_STACK_TRAMPOLINE(0x280)
1107 BAD_STACK_TRAMPOLINE(0x2a0)
1108 BAD_STACK_TRAMPOLINE(0x2c0)
1109 BAD_STACK_TRAMPOLINE(0x2e0)
1110 BAD_STACK_TRAMPOLINE(0x300)
1111 BAD_STACK_TRAMPOLINE(0x310)
1112 BAD_STACK_TRAMPOLINE(0x320)
1113 BAD_STACK_TRAMPOLINE(0x340)
1114 BAD_STACK_TRAMPOLINE(0x400)
1115 BAD_STACK_TRAMPOLINE(0x500)
1116 BAD_STACK_TRAMPOLINE(0x600)
1117 BAD_STACK_TRAMPOLINE(0x700)
1118 BAD_STACK_TRAMPOLINE(0x800)
1119 BAD_STACK_TRAMPOLINE(0x900)
1120 BAD_STACK_TRAMPOLINE(0x980)
1121 BAD_STACK_TRAMPOLINE(0x9f0)
1122 BAD_STACK_TRAMPOLINE(0xa00)
1123 BAD_STACK_TRAMPOLINE(0xb00)
1124 BAD_STACK_TRAMPOLINE(0xc00)
1125 BAD_STACK_TRAMPOLINE(0xd00)
1126 BAD_STACK_TRAMPOLINE(0xd08)
1127 BAD_STACK_TRAMPOLINE(0xe00)
1128 BAD_STACK_TRAMPOLINE(0xf00)
1129 BAD_STACK_TRAMPOLINE(0xf20)
1131 .globl bad_stack_book3e
1133 /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
1134 mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */
1135 ld r1,PACAEMERGSP(r13)
1136 subi r1,r1,64+INT_FRAME_SIZE
1139 ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
1140 lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
1147 std r0,GPR0(r1); /* save r0 in stackframe */ \
1148 std r2,GPR2(r1); /* save r2 in stackframe */ \
1149 SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
1150 SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
1151 std r9,GPR9(r1); /* save r9 in stackframe */ \
1152 ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \
1153 ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \
1154 mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
1155 std r3,GPR10(r1); /* save r10 to stackframe */ \
1156 std r4,GPR11(r1); /* save r11 to stackframe */ \
1157 std r12,GPR12(r1); /* save r12 in stackframe */ \
1158 std r5,GPR13(r1); /* save it to stackframe */ \
1167 lhz r12,PACA_TRAP_SAVE(r13)
1169 addi r11,r1,INT_FRAME_SIZE
1174 1: addi r3,r1,STACK_FRAME_OVERHEAD
1175 bl .kernel_bad_stack
1179 * Setup the initial TLB for a core. This current implementation
1180 * assume that whatever we are running off will not conflict with
1181 * the new mapping at PAGE_OFFSET.
1183 _GLOBAL(initial_tlb_book3e)
1185 /* Look for the first TLB with IPROT set */
1186 mfspr r4,SPRN_TLB0CFG
1187 andi. r3,r4,TLBnCFG_IPROT
1188 lis r3,MAS0_TLBSEL(0)@h
1191 mfspr r4,SPRN_TLB1CFG
1192 andi. r3,r4,TLBnCFG_IPROT
1193 lis r3,MAS0_TLBSEL(1)@h
1196 mfspr r4,SPRN_TLB2CFG
1197 andi. r3,r4,TLBnCFG_IPROT
1198 lis r3,MAS0_TLBSEL(2)@h
1201 lis r3,MAS0_TLBSEL(3)@h
1202 mfspr r4,SPRN_TLB3CFG
1206 andi. r5,r4,TLBnCFG_HES
1209 mflr r8 /* save LR */
1210 /* 1. Find the index of the entry we're executing in
1212 * r3 = MAS0_TLBSEL (for the iprot array)
1215 bl invstr /* Find our address */
1216 invstr: mflr r6 /* Make it accessible */
1218 rlwinm r5,r7,27,31,31 /* extract MSR[IS] */
1223 tlbsx 0,r6 /* search MSR[IS], SPID=PID */
1226 rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */
1228 mfspr r7,SPRN_MAS1 /* Insure IPROT set */
1229 oris r7,r7,MAS1_IPROT@h
1233 /* 2. Invalidate all entries except the entry we're executing in
1235 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1237 * r5 = ESEL of entry we are running in
1239 andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */
1240 li r6,0 /* Set Entry counter to 0 */
1241 1: mr r7,r3 /* Set MAS0(TLBSEL) */
1242 rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
1246 rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
1248 beq skpinv /* Dont update the current execution TLB */
1252 skpinv: addi r6,r6,1 /* Increment */
1253 cmpw r6,r4 /* Are we done? */
1254 bne 1b /* If not, repeat */
1256 /* Invalidate all TLBs */
1257 PPC_TLBILX_ALL(0,R0)
1261 /* 3. Setup a temp mapping and jump to it
1263 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1264 * r5 = ESEL of entry we are running in
1266 andi. r7,r5,0x1 /* Find an entry not used and is non-zero */
1268 mr r4,r3 /* Set MAS0(TLBSEL) = 1 */
1272 rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */
1276 xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */
1284 bl 1f /* Find our address */
1286 addi r6,r6,(2f - 1b)
1291 /* 4. Clear out PIDs & Search info
1293 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1294 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1301 /* 5. Invalidate mapping we started in
1303 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1304 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1310 rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */
1316 /* The mapping only needs to be cache-coherent on SMP */
1318 #define M_IF_SMP MAS2_M
1323 /* 6. Setup KERNELBASE mapping in TLB[0]
1325 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1326 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1329 rlwinm r3,r3,0,16,3 /* clear ESEL */
1331 lis r6,(MAS1_VALID|MAS1_IPROT)@h
1332 ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
1335 LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP)
1339 ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
1346 /* 7. Jump to KERNELBASE mapping
1348 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1350 /* Now we branch the new virtual address mapped by this entry */
1351 LOAD_REG_IMMEDIATE(r6,2f)
1353 ori r7,r7,MSR_KERNEL@l
1356 rfi /* start execution out of TLB1[0] entry */
1359 /* 8. Clear out the temp mapping
1361 * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1366 rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */
1372 /* We translate LR and return */
1378 /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
1379 * kernel linear mapping. We also set MAS8 once for all here though
1380 * that will have to be made dependent on whether we are running under
1381 * a hypervisor I suppose.
1385 * This code is called as an ordinary function on the boot CPU. But to
1386 * avoid duplication, this code is also used in SCOM bringup of
1387 * secondary CPUs. We read the code between the initial_tlb_code_start
1388 * and initial_tlb_code_end labels one instruction at a time and RAM it
1389 * into the new core via SCOM. That doesn't process branches, so there
1390 * must be none between those two labels. It also means if this code
1391 * ever takes any parameters, the SCOM code must also be updated to
1394 .globl a2_tlbinit_code_start
1395 a2_tlbinit_code_start:
1397 ori r11,r3,MAS0_WQ_ALLWAYS
1398 oris r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
1400 lis r3,(MAS1_VALID | MAS1_IPROT)@h
1401 ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
1403 LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
1405 li r3,MAS3_SR | MAS3_SW | MAS3_SX
1406 mtspr SPRN_MAS7_MAS3,r3
1410 /* Write the TLB entry */
1413 .globl a2_tlbinit_after_linear_map
1414 a2_tlbinit_after_linear_map:
1416 /* Now we branch the new virtual address mapped by this entry */
1417 LOAD_REG_IMMEDIATE(r3,1f)
1421 1: /* We are now running at PAGE_OFFSET, clean the TLB of everything
1422 * else (including IPROTed things left by firmware)
1424 * r3 = current address (more or less)
1431 rlwinm r9,r4,0,TLBnCFG_N_ENTRY
1432 rlwinm r10,r4,8,0xff
1433 addi r10,r10,-1 /* Get inner loop mask */
1438 rlwinm r5,r5,0,(~(MAS1_VALID|MAS1_IPROT))
1441 rldicr r6,r6,0,51 /* Extract EPN */
1444 rlwinm r7,r7,0,0xffff0fff /* Clear HES and WQ */
1446 rlwinm r8,r7,16,0xfff /* Extract ESEL */
1451 rlwimi r7,r4,16,MAS0_ESEL_MASK
1462 addis r6,r6,(1<<30)@h
1467 .globl a2_tlbinit_after_iprot_flush
1468 a2_tlbinit_after_iprot_flush:
1470 #ifdef CONFIG_PPC_EARLY_DEBUG_WSP
1471 /* Now establish early debug mappings if applicable */
1472 /* Restore the MAS0 we used for linear mapping load */
1475 lis r3,(MAS1_VALID | MAS1_IPROT)@h
1476 ori r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT)
1478 LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G)
1480 LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW)
1481 mtspr SPRN_MAS7_MAS3,r3
1482 /* re-use the MAS8 value from the linear mapping */
1484 #endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
1490 .globl a2_tlbinit_code_end
1491 a2_tlbinit_code_end:
1493 /* We translate LR and return */
1500 * Main entry (boot CPU, thread 0)
1502 * We enter here from head_64.S, possibly after the prom_init trampoline
1503 * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
1504 * mode. Anything else is as it was left by the bootloader
1506 * Initial requirements of this port:
1508 * - Kernel loaded at 0 physical
1509 * - A good lump of memory mapped 0:0 by UTLB entry 0
1510 * - MSR:IS & MSR:DS set to 0
1512 * Note that some of the above requirements will be relaxed in the future
1513 * as the kernel becomes smarter at dealing with different initial conditions
1514 * but for now you have to be careful
1516 _GLOBAL(start_initialization_book3e)
1519 /* First, we need to setup some initial TLBs to map the kernel
1520 * text, data and bss at PAGE_OFFSET. We don't have a real mode
1521 * and always use AS 0, so we just set it up to match our link
1522 * address and never use 0 based addresses.
1524 bl .initial_tlb_book3e
1526 /* Init global core bits */
1527 bl .init_core_book3e
1529 /* Init per-thread bits */
1530 bl .init_thread_book3e
1532 /* Return to common init code */
1539 * Secondary core/processor entry
1541 * This is entered for thread 0 of a secondary core, all other threads
1542 * are expected to be stopped. It's similar to start_initialization_book3e
1543 * except that it's generally entered from the holding loop in head_64.S
1544 * after CPUs have been gathered by Open Firmware.
1546 * We assume we are in 32 bits mode running with whatever TLB entry was
1547 * set for us by the firmware or POR engine.
1549 _GLOBAL(book3e_secondary_core_init_tlb_set)
1551 b .generic_secondary_smp_init
1553 _GLOBAL(book3e_secondary_core_init)
1556 /* Do we need to setup initial TLB entry ? */
1560 /* Setup TLB for this core */
1561 bl .initial_tlb_book3e
1563 /* We can return from the above running at a different
1564 * address, so recalculate r2 (TOC)
1568 /* Init global core bits */
1569 2: bl .init_core_book3e
1571 /* Init per-thread bits */
1572 3: bl .init_thread_book3e
1574 /* Return to common init code at proper virtual address.
1576 * Due to various previous assumptions, we know we entered this
1577 * function at either the final PAGE_OFFSET mapping or using a
1578 * 1:1 mapping at 0, so we don't bother doing a complicated check
1579 * here, we just ensure the return address has the right top bits.
1581 * Note that if we ever want to be smarter about where we can be
1582 * started from, we have to be careful that by the time we reach
1583 * the code below we may already be running at a different location
1584 * than the one we were called from since initial_tlb_book3e can
1585 * have moved us already.
1589 lis r3,PAGE_OFFSET@highest
1595 _GLOBAL(book3e_secondary_thread_init)
1599 _STATIC(init_core_book3e)
1600 /* Establish the interrupt vector base */
1601 LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
1606 _STATIC(init_thread_book3e)
1607 lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
1610 /* Make sure interrupts are off */
1613 /* disable all timers and clear out status */
1621 _GLOBAL(__setup_base_ivors)
1622 SET_IVOR(0, 0x020) /* Critical Input */
1623 SET_IVOR(1, 0x000) /* Machine Check */
1624 SET_IVOR(2, 0x060) /* Data Storage */
1625 SET_IVOR(3, 0x080) /* Instruction Storage */
1626 SET_IVOR(4, 0x0a0) /* External Input */
1627 SET_IVOR(5, 0x0c0) /* Alignment */
1628 SET_IVOR(6, 0x0e0) /* Program */
1629 SET_IVOR(7, 0x100) /* FP Unavailable */
1630 SET_IVOR(8, 0x120) /* System Call */
1631 SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
1632 SET_IVOR(10, 0x160) /* Decrementer */
1633 SET_IVOR(11, 0x180) /* Fixed Interval Timer */
1634 SET_IVOR(12, 0x1a0) /* Watchdog Timer */
1635 SET_IVOR(13, 0x1c0) /* Data TLB Error */
1636 SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
1637 SET_IVOR(15, 0x040) /* Debug */
1643 _GLOBAL(setup_altivec_ivors)
1644 SET_IVOR(32, 0x200) /* AltiVec Unavailable */
1645 SET_IVOR(33, 0x220) /* AltiVec Assist */
1648 _GLOBAL(setup_perfmon_ivor)
1649 SET_IVOR(35, 0x260) /* Performance Monitor */
1652 _GLOBAL(setup_doorbell_ivors)
1653 SET_IVOR(36, 0x280) /* Processor Doorbell */
1654 SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
1657 _GLOBAL(setup_ehv_ivors)
1658 SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
1659 SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
1660 SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
1661 SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
1664 _GLOBAL(setup_lrat_ivor)
1665 SET_IVOR(42, 0x340) /* LRAT Error */