x86/speculation/mds: Fix documentation typo
[linux/fpc-iii.git] / drivers / pci / host / pcie-iproc.c
blobc0ecc9f35667f7f330b1e1a994b8dbcfa0153e46
1 /*
2 * Copyright (C) 2014 Hauke Mehrtens <hauke@hauke-m.de>
3 * Copyright (C) 2015 Broadcom Corporation
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation version 2.
9 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
10 * kind, whether express or implied; without even the implied warranty
11 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
15 #include <linux/kernel.h>
16 #include <linux/pci.h>
17 #include <linux/msi.h>
18 #include <linux/clk.h>
19 #include <linux/module.h>
20 #include <linux/mbus.h>
21 #include <linux/slab.h>
22 #include <linux/delay.h>
23 #include <linux/interrupt.h>
24 #include <linux/irqchip/arm-gic-v3.h>
25 #include <linux/platform_device.h>
26 #include <linux/of_address.h>
27 #include <linux/of_pci.h>
28 #include <linux/of_irq.h>
29 #include <linux/of_platform.h>
30 #include <linux/phy/phy.h>
32 #include "pcie-iproc.h"
34 #define EP_PERST_SOURCE_SELECT_SHIFT 2
35 #define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT)
36 #define EP_MODE_SURVIVE_PERST_SHIFT 1
37 #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT)
38 #define RC_PCIE_RST_OUTPUT_SHIFT 0
39 #define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT)
40 #define PAXC_RESET_MASK 0x7f
42 #define GIC_V3_CFG_SHIFT 0
43 #define GIC_V3_CFG BIT(GIC_V3_CFG_SHIFT)
45 #define MSI_ENABLE_CFG_SHIFT 0
46 #define MSI_ENABLE_CFG BIT(MSI_ENABLE_CFG_SHIFT)
48 #define CFG_IND_ADDR_MASK 0x00001ffc
50 #define CFG_ADDR_BUS_NUM_SHIFT 20
51 #define CFG_ADDR_BUS_NUM_MASK 0x0ff00000
52 #define CFG_ADDR_DEV_NUM_SHIFT 15
53 #define CFG_ADDR_DEV_NUM_MASK 0x000f8000
54 #define CFG_ADDR_FUNC_NUM_SHIFT 12
55 #define CFG_ADDR_FUNC_NUM_MASK 0x00007000
56 #define CFG_ADDR_REG_NUM_SHIFT 2
57 #define CFG_ADDR_REG_NUM_MASK 0x00000ffc
58 #define CFG_ADDR_CFG_TYPE_SHIFT 0
59 #define CFG_ADDR_CFG_TYPE_MASK 0x00000003
61 #define SYS_RC_INTX_MASK 0xf
63 #define PCIE_PHYLINKUP_SHIFT 3
64 #define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT)
65 #define PCIE_DL_ACTIVE_SHIFT 2
66 #define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT)
68 #define APB_ERR_EN_SHIFT 0
69 #define APB_ERR_EN BIT(APB_ERR_EN_SHIFT)
71 #define CFG_RETRY_STATUS 0xffff0001
72 #define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */
74 /* derive the enum index of the outbound/inbound mapping registers */
75 #define MAP_REG(base_reg, index) ((base_reg) + (index) * 2)
78 * Maximum number of outbound mapping window sizes that can be supported by any
79 * OARR/OMAP mapping pair
81 #define MAX_NUM_OB_WINDOW_SIZES 4
83 #define OARR_VALID_SHIFT 0
84 #define OARR_VALID BIT(OARR_VALID_SHIFT)
85 #define OARR_SIZE_CFG_SHIFT 1
88 * Maximum number of inbound mapping region sizes that can be supported by an
89 * IARR
91 #define MAX_NUM_IB_REGION_SIZES 9
93 #define IMAP_VALID_SHIFT 0
94 #define IMAP_VALID BIT(IMAP_VALID_SHIFT)
96 #define IPROC_PCI_EXP_CAP 0xac
98 #define IPROC_PCIE_REG_INVALID 0xffff
101 * iProc PCIe outbound mapping controller specific parameters
103 * @window_sizes: list of supported outbound mapping window sizes in MB
104 * @nr_sizes: number of supported outbound mapping window sizes
106 struct iproc_pcie_ob_map {
107 resource_size_t window_sizes[MAX_NUM_OB_WINDOW_SIZES];
108 unsigned int nr_sizes;
111 static const struct iproc_pcie_ob_map paxb_ob_map[] = {
113 /* OARR0/OMAP0 */
114 .window_sizes = { 128, 256 },
115 .nr_sizes = 2,
118 /* OARR1/OMAP1 */
119 .window_sizes = { 128, 256 },
120 .nr_sizes = 2,
124 static const struct iproc_pcie_ob_map paxb_v2_ob_map[] = {
126 /* OARR0/OMAP0 */
127 .window_sizes = { 128, 256 },
128 .nr_sizes = 2,
131 /* OARR1/OMAP1 */
132 .window_sizes = { 128, 256 },
133 .nr_sizes = 2,
136 /* OARR2/OMAP2 */
137 .window_sizes = { 128, 256, 512, 1024 },
138 .nr_sizes = 4,
141 /* OARR3/OMAP3 */
142 .window_sizes = { 128, 256, 512, 1024 },
143 .nr_sizes = 4,
148 * iProc PCIe inbound mapping type
150 enum iproc_pcie_ib_map_type {
151 /* for DDR memory */
152 IPROC_PCIE_IB_MAP_MEM = 0,
154 /* for device I/O memory */
155 IPROC_PCIE_IB_MAP_IO,
157 /* invalid or unused */
158 IPROC_PCIE_IB_MAP_INVALID
162 * iProc PCIe inbound mapping controller specific parameters
164 * @type: inbound mapping region type
165 * @size_unit: inbound mapping region size unit, could be SZ_1K, SZ_1M, or
166 * SZ_1G
167 * @region_sizes: list of supported inbound mapping region sizes in KB, MB, or
168 * GB, depedning on the size unit
169 * @nr_sizes: number of supported inbound mapping region sizes
170 * @nr_windows: number of supported inbound mapping windows for the region
171 * @imap_addr_offset: register offset between the upper and lower 32-bit
172 * IMAP address registers
173 * @imap_window_offset: register offset between each IMAP window
175 struct iproc_pcie_ib_map {
176 enum iproc_pcie_ib_map_type type;
177 unsigned int size_unit;
178 resource_size_t region_sizes[MAX_NUM_IB_REGION_SIZES];
179 unsigned int nr_sizes;
180 unsigned int nr_windows;
181 u16 imap_addr_offset;
182 u16 imap_window_offset;
185 static const struct iproc_pcie_ib_map paxb_v2_ib_map[] = {
187 /* IARR0/IMAP0 */
188 .type = IPROC_PCIE_IB_MAP_IO,
189 .size_unit = SZ_1K,
190 .region_sizes = { 32 },
191 .nr_sizes = 1,
192 .nr_windows = 8,
193 .imap_addr_offset = 0x40,
194 .imap_window_offset = 0x4,
197 /* IARR1/IMAP1 (currently unused) */
198 .type = IPROC_PCIE_IB_MAP_INVALID,
201 /* IARR2/IMAP2 */
202 .type = IPROC_PCIE_IB_MAP_MEM,
203 .size_unit = SZ_1M,
204 .region_sizes = { 64, 128, 256, 512, 1024, 2048, 4096, 8192,
205 16384 },
206 .nr_sizes = 9,
207 .nr_windows = 1,
208 .imap_addr_offset = 0x4,
209 .imap_window_offset = 0x8,
212 /* IARR3/IMAP3 */
213 .type = IPROC_PCIE_IB_MAP_MEM,
214 .size_unit = SZ_1G,
215 .region_sizes = { 1, 2, 4, 8, 16, 32 },
216 .nr_sizes = 6,
217 .nr_windows = 8,
218 .imap_addr_offset = 0x4,
219 .imap_window_offset = 0x8,
222 /* IARR4/IMAP4 */
223 .type = IPROC_PCIE_IB_MAP_MEM,
224 .size_unit = SZ_1G,
225 .region_sizes = { 32, 64, 128, 256, 512 },
226 .nr_sizes = 5,
227 .nr_windows = 8,
228 .imap_addr_offset = 0x4,
229 .imap_window_offset = 0x8,
234 * iProc PCIe host registers
236 enum iproc_pcie_reg {
237 /* clock/reset signal control */
238 IPROC_PCIE_CLK_CTRL = 0,
241 * To allow MSI to be steered to an external MSI controller (e.g., ARM
242 * GICv3 ITS)
244 IPROC_PCIE_MSI_GIC_MODE,
247 * IPROC_PCIE_MSI_BASE_ADDR and IPROC_PCIE_MSI_WINDOW_SIZE define the
248 * window where the MSI posted writes are written, for the writes to be
249 * interpreted as MSI writes.
251 IPROC_PCIE_MSI_BASE_ADDR,
252 IPROC_PCIE_MSI_WINDOW_SIZE,
255 * To hold the address of the register where the MSI writes are
256 * programed. When ARM GICv3 ITS is used, this should be programmed
257 * with the address of the GITS_TRANSLATER register.
259 IPROC_PCIE_MSI_ADDR_LO,
260 IPROC_PCIE_MSI_ADDR_HI,
262 /* enable MSI */
263 IPROC_PCIE_MSI_EN_CFG,
265 /* allow access to root complex configuration space */
266 IPROC_PCIE_CFG_IND_ADDR,
267 IPROC_PCIE_CFG_IND_DATA,
269 /* allow access to device configuration space */
270 IPROC_PCIE_CFG_ADDR,
271 IPROC_PCIE_CFG_DATA,
273 /* enable INTx */
274 IPROC_PCIE_INTX_EN,
276 /* outbound address mapping */
277 IPROC_PCIE_OARR0,
278 IPROC_PCIE_OMAP0,
279 IPROC_PCIE_OARR1,
280 IPROC_PCIE_OMAP1,
281 IPROC_PCIE_OARR2,
282 IPROC_PCIE_OMAP2,
283 IPROC_PCIE_OARR3,
284 IPROC_PCIE_OMAP3,
286 /* inbound address mapping */
287 IPROC_PCIE_IARR0,
288 IPROC_PCIE_IMAP0,
289 IPROC_PCIE_IARR1,
290 IPROC_PCIE_IMAP1,
291 IPROC_PCIE_IARR2,
292 IPROC_PCIE_IMAP2,
293 IPROC_PCIE_IARR3,
294 IPROC_PCIE_IMAP3,
295 IPROC_PCIE_IARR4,
296 IPROC_PCIE_IMAP4,
298 /* link status */
299 IPROC_PCIE_LINK_STATUS,
301 /* enable APB error for unsupported requests */
302 IPROC_PCIE_APB_ERR_EN,
304 /* total number of core registers */
305 IPROC_PCIE_MAX_NUM_REG,
308 /* iProc PCIe PAXB BCMA registers */
309 static const u16 iproc_pcie_reg_paxb_bcma[] = {
310 [IPROC_PCIE_CLK_CTRL] = 0x000,
311 [IPROC_PCIE_CFG_IND_ADDR] = 0x120,
312 [IPROC_PCIE_CFG_IND_DATA] = 0x124,
313 [IPROC_PCIE_CFG_ADDR] = 0x1f8,
314 [IPROC_PCIE_CFG_DATA] = 0x1fc,
315 [IPROC_PCIE_INTX_EN] = 0x330,
316 [IPROC_PCIE_LINK_STATUS] = 0xf0c,
319 /* iProc PCIe PAXB registers */
320 static const u16 iproc_pcie_reg_paxb[] = {
321 [IPROC_PCIE_CLK_CTRL] = 0x000,
322 [IPROC_PCIE_CFG_IND_ADDR] = 0x120,
323 [IPROC_PCIE_CFG_IND_DATA] = 0x124,
324 [IPROC_PCIE_CFG_ADDR] = 0x1f8,
325 [IPROC_PCIE_CFG_DATA] = 0x1fc,
326 [IPROC_PCIE_INTX_EN] = 0x330,
327 [IPROC_PCIE_OARR0] = 0xd20,
328 [IPROC_PCIE_OMAP0] = 0xd40,
329 [IPROC_PCIE_OARR1] = 0xd28,
330 [IPROC_PCIE_OMAP1] = 0xd48,
331 [IPROC_PCIE_LINK_STATUS] = 0xf0c,
332 [IPROC_PCIE_APB_ERR_EN] = 0xf40,
335 /* iProc PCIe PAXB v2 registers */
336 static const u16 iproc_pcie_reg_paxb_v2[] = {
337 [IPROC_PCIE_CLK_CTRL] = 0x000,
338 [IPROC_PCIE_CFG_IND_ADDR] = 0x120,
339 [IPROC_PCIE_CFG_IND_DATA] = 0x124,
340 [IPROC_PCIE_CFG_ADDR] = 0x1f8,
341 [IPROC_PCIE_CFG_DATA] = 0x1fc,
342 [IPROC_PCIE_INTX_EN] = 0x330,
343 [IPROC_PCIE_OARR0] = 0xd20,
344 [IPROC_PCIE_OMAP0] = 0xd40,
345 [IPROC_PCIE_OARR1] = 0xd28,
346 [IPROC_PCIE_OMAP1] = 0xd48,
347 [IPROC_PCIE_OARR2] = 0xd60,
348 [IPROC_PCIE_OMAP2] = 0xd68,
349 [IPROC_PCIE_OARR3] = 0xdf0,
350 [IPROC_PCIE_OMAP3] = 0xdf8,
351 [IPROC_PCIE_IARR0] = 0xd00,
352 [IPROC_PCIE_IMAP0] = 0xc00,
353 [IPROC_PCIE_IARR2] = 0xd10,
354 [IPROC_PCIE_IMAP2] = 0xcc0,
355 [IPROC_PCIE_IARR3] = 0xe00,
356 [IPROC_PCIE_IMAP3] = 0xe08,
357 [IPROC_PCIE_IARR4] = 0xe68,
358 [IPROC_PCIE_IMAP4] = 0xe70,
359 [IPROC_PCIE_LINK_STATUS] = 0xf0c,
360 [IPROC_PCIE_APB_ERR_EN] = 0xf40,
363 /* iProc PCIe PAXC v1 registers */
364 static const u16 iproc_pcie_reg_paxc[] = {
365 [IPROC_PCIE_CLK_CTRL] = 0x000,
366 [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
367 [IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
368 [IPROC_PCIE_CFG_ADDR] = 0x1f8,
369 [IPROC_PCIE_CFG_DATA] = 0x1fc,
372 /* iProc PCIe PAXC v2 registers */
373 static const u16 iproc_pcie_reg_paxc_v2[] = {
374 [IPROC_PCIE_MSI_GIC_MODE] = 0x050,
375 [IPROC_PCIE_MSI_BASE_ADDR] = 0x074,
376 [IPROC_PCIE_MSI_WINDOW_SIZE] = 0x078,
377 [IPROC_PCIE_MSI_ADDR_LO] = 0x07c,
378 [IPROC_PCIE_MSI_ADDR_HI] = 0x080,
379 [IPROC_PCIE_MSI_EN_CFG] = 0x09c,
380 [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
381 [IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
382 [IPROC_PCIE_CFG_ADDR] = 0x1f8,
383 [IPROC_PCIE_CFG_DATA] = 0x1fc,
386 static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
388 struct iproc_pcie *pcie;
389 #ifdef CONFIG_ARM
390 struct pci_sys_data *sys = bus->sysdata;
392 pcie = sys->private_data;
393 #else
394 pcie = bus->sysdata;
395 #endif
396 return pcie;
399 static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset)
401 return !!(reg_offset == IPROC_PCIE_REG_INVALID);
404 static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie,
405 enum iproc_pcie_reg reg)
407 return pcie->reg_offsets[reg];
410 static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie,
411 enum iproc_pcie_reg reg)
413 u16 offset = iproc_pcie_reg_offset(pcie, reg);
415 if (iproc_pcie_reg_is_invalid(offset))
416 return 0;
418 return readl(pcie->base + offset);
421 static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie,
422 enum iproc_pcie_reg reg, u32 val)
424 u16 offset = iproc_pcie_reg_offset(pcie, reg);
426 if (iproc_pcie_reg_is_invalid(offset))
427 return;
429 writel(val, pcie->base + offset);
433 * APB error forwarding can be disabled during access of configuration
434 * registers of the endpoint device, to prevent unsupported requests
435 * (typically seen during enumeration with multi-function devices) from
436 * triggering a system exception.
438 static inline void iproc_pcie_apb_err_disable(struct pci_bus *bus,
439 bool disable)
441 struct iproc_pcie *pcie = iproc_data(bus);
442 u32 val;
444 if (bus->number && pcie->has_apb_err_disable) {
445 val = iproc_pcie_read_reg(pcie, IPROC_PCIE_APB_ERR_EN);
446 if (disable)
447 val &= ~APB_ERR_EN;
448 else
449 val |= APB_ERR_EN;
450 iproc_pcie_write_reg(pcie, IPROC_PCIE_APB_ERR_EN, val);
454 static void __iomem *iproc_pcie_map_ep_cfg_reg(struct iproc_pcie *pcie,
455 unsigned int busno,
456 unsigned int slot,
457 unsigned int fn,
458 int where)
460 u16 offset;
461 u32 val;
463 /* EP device access */
464 val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
465 (slot << CFG_ADDR_DEV_NUM_SHIFT) |
466 (fn << CFG_ADDR_FUNC_NUM_SHIFT) |
467 (where & CFG_ADDR_REG_NUM_MASK) |
468 (1 & CFG_ADDR_CFG_TYPE_MASK);
470 iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val);
471 offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA);
473 if (iproc_pcie_reg_is_invalid(offset))
474 return NULL;
476 return (pcie->base + offset);
479 static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p)
481 int timeout = CFG_RETRY_STATUS_TIMEOUT_US;
482 unsigned int data;
485 * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only
486 * affects config reads of the Vendor ID. For config writes or any
487 * other config reads, the Root may automatically reissue the
488 * configuration request again as a new request.
490 * For config reads, this hardware returns CFG_RETRY_STATUS data
491 * when it receives a CRS completion, regardless of the address of
492 * the read or the CRS Software Visibility Enable bit. As a
493 * partial workaround for this, we retry in software any read that
494 * returns CFG_RETRY_STATUS.
496 * Note that a non-Vendor ID config register may have a value of
497 * CFG_RETRY_STATUS. If we read that, we can't distinguish it from
498 * a CRS completion, so we will incorrectly retry the read and
499 * eventually return the wrong data (0xffffffff).
501 data = readl(cfg_data_p);
502 while (data == CFG_RETRY_STATUS && timeout--) {
503 udelay(1);
504 data = readl(cfg_data_p);
507 if (data == CFG_RETRY_STATUS)
508 data = 0xffffffff;
510 return data;
513 static int iproc_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
514 int where, int size, u32 *val)
516 struct iproc_pcie *pcie = iproc_data(bus);
517 unsigned int slot = PCI_SLOT(devfn);
518 unsigned int fn = PCI_FUNC(devfn);
519 unsigned int busno = bus->number;
520 void __iomem *cfg_data_p;
521 unsigned int data;
522 int ret;
524 /* root complex access */
525 if (busno == 0) {
526 ret = pci_generic_config_read32(bus, devfn, where, size, val);
527 if (ret != PCIBIOS_SUCCESSFUL)
528 return ret;
530 /* Don't advertise CRS SV support */
531 if ((where & ~0x3) == IPROC_PCI_EXP_CAP + PCI_EXP_RTCTL)
532 *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
533 return PCIBIOS_SUCCESSFUL;
536 cfg_data_p = iproc_pcie_map_ep_cfg_reg(pcie, busno, slot, fn, where);
538 if (!cfg_data_p)
539 return PCIBIOS_DEVICE_NOT_FOUND;
541 data = iproc_pcie_cfg_retry(cfg_data_p);
543 *val = data;
544 if (size <= 2)
545 *val = (data >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
547 return PCIBIOS_SUCCESSFUL;
551 * Note access to the configuration registers are protected at the higher layer
552 * by 'pci_lock' in drivers/pci/access.c
554 static void __iomem *iproc_pcie_map_cfg_bus(struct iproc_pcie *pcie,
555 int busno, unsigned int devfn,
556 int where)
558 unsigned slot = PCI_SLOT(devfn);
559 unsigned fn = PCI_FUNC(devfn);
560 u16 offset;
562 /* root complex access */
563 if (busno == 0) {
564 if (slot > 0 || fn > 0)
565 return NULL;
567 iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR,
568 where & CFG_IND_ADDR_MASK);
569 offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA);
570 if (iproc_pcie_reg_is_invalid(offset))
571 return NULL;
572 else
573 return (pcie->base + offset);
577 * PAXC is connected to an internally emulated EP within the SoC. It
578 * allows only one device.
580 if (pcie->ep_is_internal)
581 if (slot > 0)
582 return NULL;
584 return iproc_pcie_map_ep_cfg_reg(pcie, busno, slot, fn, where);
587 static void __iomem *iproc_pcie_bus_map_cfg_bus(struct pci_bus *bus,
588 unsigned int devfn,
589 int where)
591 return iproc_pcie_map_cfg_bus(iproc_data(bus), bus->number, devfn,
592 where);
595 static int iproc_pci_raw_config_read32(struct iproc_pcie *pcie,
596 unsigned int devfn, int where,
597 int size, u32 *val)
599 void __iomem *addr;
601 addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3);
602 if (!addr) {
603 *val = ~0;
604 return PCIBIOS_DEVICE_NOT_FOUND;
607 *val = readl(addr);
609 if (size <= 2)
610 *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
612 return PCIBIOS_SUCCESSFUL;
615 static int iproc_pci_raw_config_write32(struct iproc_pcie *pcie,
616 unsigned int devfn, int where,
617 int size, u32 val)
619 void __iomem *addr;
620 u32 mask, tmp;
622 addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3);
623 if (!addr)
624 return PCIBIOS_DEVICE_NOT_FOUND;
626 if (size == 4) {
627 writel(val, addr);
628 return PCIBIOS_SUCCESSFUL;
631 mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
632 tmp = readl(addr) & mask;
633 tmp |= val << ((where & 0x3) * 8);
634 writel(tmp, addr);
636 return PCIBIOS_SUCCESSFUL;
639 static int iproc_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
640 int where, int size, u32 *val)
642 int ret;
643 struct iproc_pcie *pcie = iproc_data(bus);
645 iproc_pcie_apb_err_disable(bus, true);
646 if (pcie->type == IPROC_PCIE_PAXB_V2)
647 ret = iproc_pcie_config_read(bus, devfn, where, size, val);
648 else
649 ret = pci_generic_config_read32(bus, devfn, where, size, val);
650 iproc_pcie_apb_err_disable(bus, false);
652 return ret;
655 static int iproc_pcie_config_write32(struct pci_bus *bus, unsigned int devfn,
656 int where, int size, u32 val)
658 int ret;
660 iproc_pcie_apb_err_disable(bus, true);
661 ret = pci_generic_config_write32(bus, devfn, where, size, val);
662 iproc_pcie_apb_err_disable(bus, false);
664 return ret;
667 static struct pci_ops iproc_pcie_ops = {
668 .map_bus = iproc_pcie_bus_map_cfg_bus,
669 .read = iproc_pcie_config_read32,
670 .write = iproc_pcie_config_write32,
673 static void iproc_pcie_perst_ctrl(struct iproc_pcie *pcie, bool assert)
675 u32 val;
678 * PAXC and the internal emulated endpoint device downstream should not
679 * be reset. If firmware has been loaded on the endpoint device at an
680 * earlier boot stage, reset here causes issues.
682 if (pcie->ep_is_internal)
683 return;
685 if (assert) {
686 val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
687 val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
688 ~RC_PCIE_RST_OUTPUT;
689 iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
690 udelay(250);
691 } else {
692 val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
693 val |= RC_PCIE_RST_OUTPUT;
694 iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
695 msleep(100);
699 int iproc_pcie_shutdown(struct iproc_pcie *pcie)
701 iproc_pcie_perst_ctrl(pcie, true);
702 msleep(500);
704 return 0;
706 EXPORT_SYMBOL_GPL(iproc_pcie_shutdown);
708 static int iproc_pcie_check_link(struct iproc_pcie *pcie)
710 struct device *dev = pcie->dev;
711 u32 hdr_type, link_ctrl, link_status, class, val;
712 bool link_is_active = false;
715 * PAXC connects to emulated endpoint devices directly and does not
716 * have a Serdes. Therefore skip the link detection logic here.
718 if (pcie->ep_is_internal)
719 return 0;
721 val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS);
722 if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) {
723 dev_err(dev, "PHY or data link is INACTIVE!\n");
724 return -ENODEV;
727 /* make sure we are not in EP mode */
728 iproc_pci_raw_config_read32(pcie, 0, PCI_HEADER_TYPE, 1, &hdr_type);
729 if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) {
730 dev_err(dev, "in EP mode, hdr=%#02x\n", hdr_type);
731 return -EFAULT;
734 /* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */
735 #define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c
736 #define PCI_CLASS_BRIDGE_MASK 0xffff00
737 #define PCI_CLASS_BRIDGE_SHIFT 8
738 iproc_pci_raw_config_read32(pcie, 0, PCI_BRIDGE_CTRL_REG_OFFSET,
739 4, &class);
740 class &= ~PCI_CLASS_BRIDGE_MASK;
741 class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT);
742 iproc_pci_raw_config_write32(pcie, 0, PCI_BRIDGE_CTRL_REG_OFFSET,
743 4, class);
745 /* check link status to see if link is active */
746 iproc_pci_raw_config_read32(pcie, 0, IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA,
747 2, &link_status);
748 if (link_status & PCI_EXP_LNKSTA_NLW)
749 link_is_active = true;
751 if (!link_is_active) {
752 /* try GEN 1 link speed */
753 #define PCI_TARGET_LINK_SPEED_MASK 0xf
754 #define PCI_TARGET_LINK_SPEED_GEN2 0x2
755 #define PCI_TARGET_LINK_SPEED_GEN1 0x1
756 iproc_pci_raw_config_read32(pcie, 0,
757 IPROC_PCI_EXP_CAP + PCI_EXP_LNKCTL2,
758 4, &link_ctrl);
759 if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) ==
760 PCI_TARGET_LINK_SPEED_GEN2) {
761 link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK;
762 link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1;
763 iproc_pci_raw_config_write32(pcie, 0,
764 IPROC_PCI_EXP_CAP + PCI_EXP_LNKCTL2,
765 4, link_ctrl);
766 msleep(100);
768 iproc_pci_raw_config_read32(pcie, 0,
769 IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA,
770 2, &link_status);
771 if (link_status & PCI_EXP_LNKSTA_NLW)
772 link_is_active = true;
776 dev_info(dev, "link: %s\n", link_is_active ? "UP" : "DOWN");
778 return link_is_active ? 0 : -ENODEV;
781 static void iproc_pcie_enable(struct iproc_pcie *pcie)
783 iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK);
786 static inline bool iproc_pcie_ob_is_valid(struct iproc_pcie *pcie,
787 int window_idx)
789 u32 val;
791 val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_OARR0, window_idx));
793 return !!(val & OARR_VALID);
796 static inline int iproc_pcie_ob_write(struct iproc_pcie *pcie, int window_idx,
797 int size_idx, u64 axi_addr, u64 pci_addr)
799 struct device *dev = pcie->dev;
800 u16 oarr_offset, omap_offset;
803 * Derive the OARR/OMAP offset from the first pair (OARR0/OMAP0) based
804 * on window index.
806 oarr_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_OARR0,
807 window_idx));
808 omap_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_OMAP0,
809 window_idx));
810 if (iproc_pcie_reg_is_invalid(oarr_offset) ||
811 iproc_pcie_reg_is_invalid(omap_offset))
812 return -EINVAL;
815 * Program the OARR registers. The upper 32-bit OARR register is
816 * always right after the lower 32-bit OARR register.
818 writel(lower_32_bits(axi_addr) | (size_idx << OARR_SIZE_CFG_SHIFT) |
819 OARR_VALID, pcie->base + oarr_offset);
820 writel(upper_32_bits(axi_addr), pcie->base + oarr_offset + 4);
822 /* now program the OMAP registers */
823 writel(lower_32_bits(pci_addr), pcie->base + omap_offset);
824 writel(upper_32_bits(pci_addr), pcie->base + omap_offset + 4);
826 dev_info(dev, "ob window [%d]: offset 0x%x axi %pap pci %pap\n",
827 window_idx, oarr_offset, &axi_addr, &pci_addr);
828 dev_info(dev, "oarr lo 0x%x oarr hi 0x%x\n",
829 readl(pcie->base + oarr_offset),
830 readl(pcie->base + oarr_offset + 4));
831 dev_info(dev, "omap lo 0x%x omap hi 0x%x\n",
832 readl(pcie->base + omap_offset),
833 readl(pcie->base + omap_offset + 4));
835 return 0;
839 * Some iProc SoCs require the SW to configure the outbound address mapping
841 * Outbound address translation:
843 * iproc_pcie_address = axi_address - axi_offset
844 * OARR = iproc_pcie_address
845 * OMAP = pci_addr
847 * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address
849 static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
850 u64 pci_addr, resource_size_t size)
852 struct iproc_pcie_ob *ob = &pcie->ob;
853 struct device *dev = pcie->dev;
854 int ret = -EINVAL, window_idx, size_idx;
856 if (axi_addr < ob->axi_offset) {
857 dev_err(dev, "axi address %pap less than offset %pap\n",
858 &axi_addr, &ob->axi_offset);
859 return -EINVAL;
863 * Translate the AXI address to the internal address used by the iProc
864 * PCIe core before programming the OARR
866 axi_addr -= ob->axi_offset;
868 /* iterate through all OARR/OMAP mapping windows */
869 for (window_idx = ob->nr_windows - 1; window_idx >= 0; window_idx--) {
870 const struct iproc_pcie_ob_map *ob_map =
871 &pcie->ob_map[window_idx];
874 * If current outbound window is already in use, move on to the
875 * next one.
877 if (iproc_pcie_ob_is_valid(pcie, window_idx))
878 continue;
881 * Iterate through all supported window sizes within the
882 * OARR/OMAP pair to find a match. Go through the window sizes
883 * in a descending order.
885 for (size_idx = ob_map->nr_sizes - 1; size_idx >= 0;
886 size_idx--) {
887 resource_size_t window_size =
888 ob_map->window_sizes[size_idx] * SZ_1M;
890 if (size < window_size)
891 continue;
893 if (!IS_ALIGNED(axi_addr, window_size) ||
894 !IS_ALIGNED(pci_addr, window_size)) {
895 dev_err(dev,
896 "axi %pap or pci %pap not aligned\n",
897 &axi_addr, &pci_addr);
898 return -EINVAL;
902 * Match found! Program both OARR and OMAP and mark
903 * them as a valid entry.
905 ret = iproc_pcie_ob_write(pcie, window_idx, size_idx,
906 axi_addr, pci_addr);
907 if (ret)
908 goto err_ob;
910 size -= window_size;
911 if (size == 0)
912 return 0;
915 * If we are here, we are done with the current window,
916 * but not yet finished all mappings. Need to move on
917 * to the next window.
919 axi_addr += window_size;
920 pci_addr += window_size;
921 break;
925 err_ob:
926 dev_err(dev, "unable to configure outbound mapping\n");
927 dev_err(dev,
928 "axi %pap, axi offset %pap, pci %pap, res size %pap\n",
929 &axi_addr, &ob->axi_offset, &pci_addr, &size);
931 return ret;
934 static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
935 struct list_head *resources)
937 struct device *dev = pcie->dev;
938 struct resource_entry *window;
939 int ret;
941 resource_list_for_each_entry(window, resources) {
942 struct resource *res = window->res;
943 u64 res_type = resource_type(res);
945 switch (res_type) {
946 case IORESOURCE_IO:
947 case IORESOURCE_BUS:
948 break;
949 case IORESOURCE_MEM:
950 ret = iproc_pcie_setup_ob(pcie, res->start,
951 res->start - window->offset,
952 resource_size(res));
953 if (ret)
954 return ret;
955 break;
956 default:
957 dev_err(dev, "invalid resource %pR\n", res);
958 return -EINVAL;
962 return 0;
965 static inline bool iproc_pcie_ib_is_in_use(struct iproc_pcie *pcie,
966 int region_idx)
968 const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx];
969 u32 val;
971 val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_IARR0, region_idx));
973 return !!(val & (BIT(ib_map->nr_sizes) - 1));
976 static inline bool iproc_pcie_ib_check_type(const struct iproc_pcie_ib_map *ib_map,
977 enum iproc_pcie_ib_map_type type)
979 return !!(ib_map->type == type);
982 static int iproc_pcie_ib_write(struct iproc_pcie *pcie, int region_idx,
983 int size_idx, int nr_windows, u64 axi_addr,
984 u64 pci_addr, resource_size_t size)
986 struct device *dev = pcie->dev;
987 const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx];
988 u16 iarr_offset, imap_offset;
989 u32 val;
990 int window_idx;
992 iarr_offset = iproc_pcie_reg_offset(pcie,
993 MAP_REG(IPROC_PCIE_IARR0, region_idx));
994 imap_offset = iproc_pcie_reg_offset(pcie,
995 MAP_REG(IPROC_PCIE_IMAP0, region_idx));
996 if (iproc_pcie_reg_is_invalid(iarr_offset) ||
997 iproc_pcie_reg_is_invalid(imap_offset))
998 return -EINVAL;
1000 dev_info(dev, "ib region [%d]: offset 0x%x axi %pap pci %pap\n",
1001 region_idx, iarr_offset, &axi_addr, &pci_addr);
1004 * Program the IARR registers. The upper 32-bit IARR register is
1005 * always right after the lower 32-bit IARR register.
1007 writel(lower_32_bits(pci_addr) | BIT(size_idx),
1008 pcie->base + iarr_offset);
1009 writel(upper_32_bits(pci_addr), pcie->base + iarr_offset + 4);
1011 dev_info(dev, "iarr lo 0x%x iarr hi 0x%x\n",
1012 readl(pcie->base + iarr_offset),
1013 readl(pcie->base + iarr_offset + 4));
1016 * Now program the IMAP registers. Each IARR region may have one or
1017 * more IMAP windows.
1019 size >>= ilog2(nr_windows);
1020 for (window_idx = 0; window_idx < nr_windows; window_idx++) {
1021 val = readl(pcie->base + imap_offset);
1022 val |= lower_32_bits(axi_addr) | IMAP_VALID;
1023 writel(val, pcie->base + imap_offset);
1024 writel(upper_32_bits(axi_addr),
1025 pcie->base + imap_offset + ib_map->imap_addr_offset);
1027 dev_info(dev, "imap window [%d] lo 0x%x hi 0x%x\n",
1028 window_idx, readl(pcie->base + imap_offset),
1029 readl(pcie->base + imap_offset +
1030 ib_map->imap_addr_offset));
1032 imap_offset += ib_map->imap_window_offset;
1033 axi_addr += size;
1036 return 0;
1039 static int iproc_pcie_setup_ib(struct iproc_pcie *pcie,
1040 struct of_pci_range *range,
1041 enum iproc_pcie_ib_map_type type)
1043 struct device *dev = pcie->dev;
1044 struct iproc_pcie_ib *ib = &pcie->ib;
1045 int ret;
1046 unsigned int region_idx, size_idx;
1047 u64 axi_addr = range->cpu_addr, pci_addr = range->pci_addr;
1048 resource_size_t size = range->size;
1050 /* iterate through all IARR mapping regions */
1051 for (region_idx = 0; region_idx < ib->nr_regions; region_idx++) {
1052 const struct iproc_pcie_ib_map *ib_map =
1053 &pcie->ib_map[region_idx];
1056 * If current inbound region is already in use or not a
1057 * compatible type, move on to the next.
1059 if (iproc_pcie_ib_is_in_use(pcie, region_idx) ||
1060 !iproc_pcie_ib_check_type(ib_map, type))
1061 continue;
1063 /* iterate through all supported region sizes to find a match */
1064 for (size_idx = 0; size_idx < ib_map->nr_sizes; size_idx++) {
1065 resource_size_t region_size =
1066 ib_map->region_sizes[size_idx] * ib_map->size_unit;
1068 if (size != region_size)
1069 continue;
1071 if (!IS_ALIGNED(axi_addr, region_size) ||
1072 !IS_ALIGNED(pci_addr, region_size)) {
1073 dev_err(dev,
1074 "axi %pap or pci %pap not aligned\n",
1075 &axi_addr, &pci_addr);
1076 return -EINVAL;
1079 /* Match found! Program IARR and all IMAP windows. */
1080 ret = iproc_pcie_ib_write(pcie, region_idx, size_idx,
1081 ib_map->nr_windows, axi_addr,
1082 pci_addr, size);
1083 if (ret)
1084 goto err_ib;
1085 else
1086 return 0;
1090 ret = -EINVAL;
1092 err_ib:
1093 dev_err(dev, "unable to configure inbound mapping\n");
1094 dev_err(dev, "axi %pap, pci %pap, res size %pap\n",
1095 &axi_addr, &pci_addr, &size);
1097 return ret;
1100 static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
1101 struct device_node *node)
1103 const int na = 3, ns = 2;
1104 int rlen;
1106 parser->node = node;
1107 parser->pna = of_n_addr_cells(node);
1108 parser->np = parser->pna + na + ns;
1110 parser->range = of_get_property(node, "dma-ranges", &rlen);
1111 if (!parser->range)
1112 return -ENOENT;
1114 parser->end = parser->range + rlen / sizeof(__be32);
1115 return 0;
1118 static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie)
1120 struct of_pci_range range;
1121 struct of_pci_range_parser parser;
1122 int ret;
1124 /* Get the dma-ranges from DT */
1125 ret = pci_dma_range_parser_init(&parser, pcie->dev->of_node);
1126 if (ret)
1127 return ret;
1129 for_each_of_pci_range(&parser, &range) {
1130 /* Each range entry corresponds to an inbound mapping region */
1131 ret = iproc_pcie_setup_ib(pcie, &range, IPROC_PCIE_IB_MAP_MEM);
1132 if (ret)
1133 return ret;
1136 return 0;
1139 static int iproce_pcie_get_msi(struct iproc_pcie *pcie,
1140 struct device_node *msi_node,
1141 u64 *msi_addr)
1143 struct device *dev = pcie->dev;
1144 int ret;
1145 struct resource res;
1148 * Check if 'msi-map' points to ARM GICv3 ITS, which is the only
1149 * supported external MSI controller that requires steering.
1151 if (!of_device_is_compatible(msi_node, "arm,gic-v3-its")) {
1152 dev_err(dev, "unable to find compatible MSI controller\n");
1153 return -ENODEV;
1156 /* derive GITS_TRANSLATER address from GICv3 */
1157 ret = of_address_to_resource(msi_node, 0, &res);
1158 if (ret < 0) {
1159 dev_err(dev, "unable to obtain MSI controller resources\n");
1160 return ret;
1163 *msi_addr = res.start + GITS_TRANSLATER;
1164 return 0;
1167 static int iproc_pcie_paxb_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr)
1169 int ret;
1170 struct of_pci_range range;
1172 memset(&range, 0, sizeof(range));
1173 range.size = SZ_32K;
1174 range.pci_addr = range.cpu_addr = msi_addr & ~(range.size - 1);
1176 ret = iproc_pcie_setup_ib(pcie, &range, IPROC_PCIE_IB_MAP_IO);
1177 return ret;
1180 static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr)
1182 u32 val;
1185 * Program bits [43:13] of address of GITS_TRANSLATER register into
1186 * bits [30:0] of the MSI base address register. In fact, in all iProc
1187 * based SoCs, all I/O register bases are well below the 32-bit
1188 * boundary, so we can safely assume bits [43:32] are always zeros.
1190 iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_BASE_ADDR,
1191 (u32)(msi_addr >> 13));
1193 /* use a default 8K window size */
1194 iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_WINDOW_SIZE, 0);
1196 /* steering MSI to GICv3 ITS */
1197 val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_GIC_MODE);
1198 val |= GIC_V3_CFG;
1199 iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_GIC_MODE, val);
1202 * Program bits [43:2] of address of GITS_TRANSLATER register into the
1203 * iProc MSI address registers.
1205 msi_addr >>= 2;
1206 iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_ADDR_HI,
1207 upper_32_bits(msi_addr));
1208 iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_ADDR_LO,
1209 lower_32_bits(msi_addr));
1211 /* enable MSI */
1212 val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
1213 val |= MSI_ENABLE_CFG;
1214 iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
1217 static int iproc_pcie_msi_steer(struct iproc_pcie *pcie,
1218 struct device_node *msi_node)
1220 struct device *dev = pcie->dev;
1221 int ret;
1222 u64 msi_addr;
1224 ret = iproce_pcie_get_msi(pcie, msi_node, &msi_addr);
1225 if (ret < 0) {
1226 dev_err(dev, "msi steering failed\n");
1227 return ret;
1230 switch (pcie->type) {
1231 case IPROC_PCIE_PAXB_V2:
1232 ret = iproc_pcie_paxb_v2_msi_steer(pcie, msi_addr);
1233 if (ret)
1234 return ret;
1235 break;
1236 case IPROC_PCIE_PAXC_V2:
1237 iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
1238 break;
1239 default:
1240 return -EINVAL;
1243 return 0;
1246 static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
1248 struct device_node *msi_node;
1249 int ret;
1252 * Either the "msi-parent" or the "msi-map" phandle needs to exist
1253 * for us to obtain the MSI node.
1256 msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
1257 if (!msi_node) {
1258 const __be32 *msi_map = NULL;
1259 int len;
1260 u32 phandle;
1262 msi_map = of_get_property(pcie->dev->of_node, "msi-map", &len);
1263 if (!msi_map)
1264 return -ENODEV;
1266 phandle = be32_to_cpup(msi_map + 1);
1267 msi_node = of_find_node_by_phandle(phandle);
1268 if (!msi_node)
1269 return -ENODEV;
1273 * Certain revisions of the iProc PCIe controller require additional
1274 * configurations to steer the MSI writes towards an external MSI
1275 * controller.
1277 if (pcie->need_msi_steer) {
1278 ret = iproc_pcie_msi_steer(pcie, msi_node);
1279 if (ret)
1280 return ret;
1284 * If another MSI controller is being used, the call below should fail
1285 * but that is okay
1287 return iproc_msi_init(pcie, msi_node);
1290 static void iproc_pcie_msi_disable(struct iproc_pcie *pcie)
1292 iproc_msi_exit(pcie);
1295 static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
1297 struct device *dev = pcie->dev;
1298 unsigned int reg_idx;
1299 const u16 *regs;
1301 switch (pcie->type) {
1302 case IPROC_PCIE_PAXB_BCMA:
1303 regs = iproc_pcie_reg_paxb_bcma;
1304 break;
1305 case IPROC_PCIE_PAXB:
1306 regs = iproc_pcie_reg_paxb;
1307 pcie->has_apb_err_disable = true;
1308 if (pcie->need_ob_cfg) {
1309 pcie->ob_map = paxb_ob_map;
1310 pcie->ob.nr_windows = ARRAY_SIZE(paxb_ob_map);
1312 break;
1313 case IPROC_PCIE_PAXB_V2:
1314 regs = iproc_pcie_reg_paxb_v2;
1315 pcie->has_apb_err_disable = true;
1316 if (pcie->need_ob_cfg) {
1317 pcie->ob_map = paxb_v2_ob_map;
1318 pcie->ob.nr_windows = ARRAY_SIZE(paxb_v2_ob_map);
1320 pcie->ib.nr_regions = ARRAY_SIZE(paxb_v2_ib_map);
1321 pcie->ib_map = paxb_v2_ib_map;
1322 pcie->need_msi_steer = true;
1323 dev_warn(dev, "reads of config registers that contain %#x return incorrect data\n",
1324 CFG_RETRY_STATUS);
1325 break;
1326 case IPROC_PCIE_PAXC:
1327 regs = iproc_pcie_reg_paxc;
1328 pcie->ep_is_internal = true;
1329 break;
1330 case IPROC_PCIE_PAXC_V2:
1331 regs = iproc_pcie_reg_paxc_v2;
1332 pcie->ep_is_internal = true;
1333 pcie->need_msi_steer = true;
1334 break;
1335 default:
1336 dev_err(dev, "incompatible iProc PCIe interface\n");
1337 return -EINVAL;
1340 pcie->reg_offsets = devm_kcalloc(dev, IPROC_PCIE_MAX_NUM_REG,
1341 sizeof(*pcie->reg_offsets),
1342 GFP_KERNEL);
1343 if (!pcie->reg_offsets)
1344 return -ENOMEM;
1346 /* go through the register table and populate all valid registers */
1347 pcie->reg_offsets[0] = (pcie->type == IPROC_PCIE_PAXC_V2) ?
1348 IPROC_PCIE_REG_INVALID : regs[0];
1349 for (reg_idx = 1; reg_idx < IPROC_PCIE_MAX_NUM_REG; reg_idx++)
1350 pcie->reg_offsets[reg_idx] = regs[reg_idx] ?
1351 regs[reg_idx] : IPROC_PCIE_REG_INVALID;
1353 return 0;
1356 int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
1358 struct device *dev;
1359 int ret;
1360 void *sysdata;
1361 struct pci_bus *child;
1362 struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
1364 dev = pcie->dev;
1366 ret = iproc_pcie_rev_init(pcie);
1367 if (ret) {
1368 dev_err(dev, "unable to initialize controller parameters\n");
1369 return ret;
1372 ret = devm_request_pci_bus_resources(dev, res);
1373 if (ret)
1374 return ret;
1376 ret = phy_init(pcie->phy);
1377 if (ret) {
1378 dev_err(dev, "unable to initialize PCIe PHY\n");
1379 return ret;
1382 ret = phy_power_on(pcie->phy);
1383 if (ret) {
1384 dev_err(dev, "unable to power on PCIe PHY\n");
1385 goto err_exit_phy;
1388 iproc_pcie_perst_ctrl(pcie, true);
1389 iproc_pcie_perst_ctrl(pcie, false);
1391 if (pcie->need_ob_cfg) {
1392 ret = iproc_pcie_map_ranges(pcie, res);
1393 if (ret) {
1394 dev_err(dev, "map failed\n");
1395 goto err_power_off_phy;
1399 if (pcie->need_ib_cfg) {
1400 ret = iproc_pcie_map_dma_ranges(pcie);
1401 if (ret && ret != -ENOENT)
1402 goto err_power_off_phy;
1405 #ifdef CONFIG_ARM
1406 pcie->sysdata.private_data = pcie;
1407 sysdata = &pcie->sysdata;
1408 #else
1409 sysdata = pcie;
1410 #endif
1412 ret = iproc_pcie_check_link(pcie);
1413 if (ret) {
1414 dev_err(dev, "no PCIe EP device detected\n");
1415 goto err_power_off_phy;
1418 iproc_pcie_enable(pcie);
1420 if (IS_ENABLED(CONFIG_PCI_MSI))
1421 if (iproc_pcie_msi_enable(pcie))
1422 dev_info(dev, "not using iProc MSI\n");
1424 list_splice_init(res, &host->windows);
1425 host->busnr = 0;
1426 host->dev.parent = dev;
1427 host->ops = &iproc_pcie_ops;
1428 host->sysdata = sysdata;
1429 host->map_irq = pcie->map_irq;
1430 host->swizzle_irq = pci_common_swizzle;
1432 ret = pci_scan_root_bus_bridge(host);
1433 if (ret < 0) {
1434 dev_err(dev, "failed to scan host: %d\n", ret);
1435 goto err_power_off_phy;
1438 pci_assign_unassigned_bus_resources(host->bus);
1440 pcie->root_bus = host->bus;
1442 list_for_each_entry(child, &host->bus->children, node)
1443 pcie_bus_configure_settings(child);
1445 pci_bus_add_devices(host->bus);
1447 return 0;
1449 err_power_off_phy:
1450 phy_power_off(pcie->phy);
1451 err_exit_phy:
1452 phy_exit(pcie->phy);
1453 return ret;
1455 EXPORT_SYMBOL(iproc_pcie_setup);
1457 int iproc_pcie_remove(struct iproc_pcie *pcie)
1459 pci_stop_root_bus(pcie->root_bus);
1460 pci_remove_root_bus(pcie->root_bus);
1462 iproc_pcie_msi_disable(pcie);
1464 phy_power_off(pcie->phy);
1465 phy_exit(pcie->phy);
1467 return 0;
1469 EXPORT_SYMBOL(iproc_pcie_remove);
1471 MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
1472 MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
1473 MODULE_LICENSE("GPL v2");