5 Copyright (C) 2008 Michael Buesch <m@bues.ch>
7 Please do _only_ contact the people listed _above_ with issues related to this driver.
8 All the other people listed below are not related to this driver. Their names
9 are only here, because this driver is derived from the bt848 driver.
12 Derived from the bt848 driver:
14 Copyright (C) 1996,97,98 Ralph Metzler
16 (c) 1999-2002 Gerd Knorr
18 some v4l2 code lines are taken from Justin's bttv2 driver which is
19 (c) 2000 Justin Schoeman
22 (c) 2005-2006 Nickolay V. Shmyrev
24 Fixes to be fully V4L2 compliant by
25 (c) 2006 Mauro Carvalho Chehab
27 Cropping and overscan support
28 Copyright (C) 2005, 2006 Michael H. Schimek
29 Sponsored by OPQ Systems AB
31 This program is free software; you can redistribute it and/or modify
32 it under the terms of the GNU General Public License as published by
33 the Free Software Foundation; either version 2 of the License, or
34 (at your option) any later version.
36 This program is distributed in the hope that it will be useful,
37 but WITHOUT ANY WARRANTY; without even the implied warranty of
38 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
39 GNU General Public License for more details.
41 You should have received a copy of the GNU General Public License
42 along with this program; if not, write to the Free Software
43 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
46 #include <linux/module.h>
47 #include <linux/pci.h>
48 #include <linux/spinlock.h>
49 #include <linux/gpio.h>
50 #include <linux/slab.h>
52 /* Steal the hardware definitions from the bttv driver. */
53 #include "../media/pci/bt8xx/bt848.h"
56 #define BT8XXGPIO_NR_GPIOS 24 /* We have 24 GPIO pins */
64 struct gpio_chip gpio
;
72 #define bgwrite(dat, adr) writel((dat), bg->mmio+(adr))
73 #define bgread(adr) readl(bg->mmio+(adr))
76 static int modparam_gpiobase
= -1/* dynamic */;
77 module_param_named(gpiobase
, modparam_gpiobase
, int, 0444);
78 MODULE_PARM_DESC(gpiobase
, "The GPIO number base. -1 means dynamic, which is the default.");
81 static int bt8xxgpio_gpio_direction_input(struct gpio_chip
*gpio
, unsigned nr
)
83 struct bt8xxgpio
*bg
= gpiochip_get_data(gpio
);
87 spin_lock_irqsave(&bg
->lock
, flags
);
89 data
= bgread(BT848_GPIO_DATA
);
91 bgwrite(data
, BT848_GPIO_DATA
);
93 outen
= bgread(BT848_GPIO_OUT_EN
);
95 bgwrite(outen
, BT848_GPIO_OUT_EN
);
97 spin_unlock_irqrestore(&bg
->lock
, flags
);
102 static int bt8xxgpio_gpio_get(struct gpio_chip
*gpio
, unsigned nr
)
104 struct bt8xxgpio
*bg
= gpiochip_get_data(gpio
);
108 spin_lock_irqsave(&bg
->lock
, flags
);
109 val
= bgread(BT848_GPIO_DATA
);
110 spin_unlock_irqrestore(&bg
->lock
, flags
);
112 return !!(val
& (1 << nr
));
115 static int bt8xxgpio_gpio_direction_output(struct gpio_chip
*gpio
,
116 unsigned nr
, int val
)
118 struct bt8xxgpio
*bg
= gpiochip_get_data(gpio
);
122 spin_lock_irqsave(&bg
->lock
, flags
);
124 outen
= bgread(BT848_GPIO_OUT_EN
);
126 bgwrite(outen
, BT848_GPIO_OUT_EN
);
128 data
= bgread(BT848_GPIO_DATA
);
133 bgwrite(data
, BT848_GPIO_DATA
);
135 spin_unlock_irqrestore(&bg
->lock
, flags
);
140 static void bt8xxgpio_gpio_set(struct gpio_chip
*gpio
,
141 unsigned nr
, int val
)
143 struct bt8xxgpio
*bg
= gpiochip_get_data(gpio
);
147 spin_lock_irqsave(&bg
->lock
, flags
);
149 data
= bgread(BT848_GPIO_DATA
);
154 bgwrite(data
, BT848_GPIO_DATA
);
156 spin_unlock_irqrestore(&bg
->lock
, flags
);
159 static void bt8xxgpio_gpio_setup(struct bt8xxgpio
*bg
)
161 struct gpio_chip
*c
= &bg
->gpio
;
163 c
->label
= dev_name(&bg
->pdev
->dev
);
164 c
->owner
= THIS_MODULE
;
165 c
->direction_input
= bt8xxgpio_gpio_direction_input
;
166 c
->get
= bt8xxgpio_gpio_get
;
167 c
->direction_output
= bt8xxgpio_gpio_direction_output
;
168 c
->set
= bt8xxgpio_gpio_set
;
170 c
->base
= modparam_gpiobase
;
171 c
->ngpio
= BT8XXGPIO_NR_GPIOS
;
172 c
->can_sleep
= false;
175 static int bt8xxgpio_probe(struct pci_dev
*dev
,
176 const struct pci_device_id
*pci_id
)
178 struct bt8xxgpio
*bg
;
181 bg
= devm_kzalloc(&dev
->dev
, sizeof(struct bt8xxgpio
), GFP_KERNEL
);
186 spin_lock_init(&bg
->lock
);
188 err
= pci_enable_device(dev
);
190 printk(KERN_ERR
"bt8xxgpio: Can't enable device.\n");
193 if (!devm_request_mem_region(&dev
->dev
, pci_resource_start(dev
, 0),
194 pci_resource_len(dev
, 0),
196 printk(KERN_WARNING
"bt8xxgpio: Can't request iomem (0x%llx).\n",
197 (unsigned long long)pci_resource_start(dev
, 0));
202 pci_set_drvdata(dev
, bg
);
204 bg
->mmio
= devm_ioremap(&dev
->dev
, pci_resource_start(dev
, 0), 0x1000);
206 printk(KERN_ERR
"bt8xxgpio: ioremap() failed\n");
211 /* Disable interrupts */
212 bgwrite(0, BT848_INT_MASK
);
215 bgwrite(0, BT848_GPIO_DMA_CTL
);
216 bgwrite(0, BT848_GPIO_REG_INP
);
217 bgwrite(0, BT848_GPIO_OUT_EN
);
219 bt8xxgpio_gpio_setup(bg
);
220 err
= gpiochip_add_data(&bg
->gpio
, bg
);
222 printk(KERN_ERR
"bt8xxgpio: Failed to register GPIOs\n");
229 pci_disable_device(dev
);
234 static void bt8xxgpio_remove(struct pci_dev
*pdev
)
236 struct bt8xxgpio
*bg
= pci_get_drvdata(pdev
);
238 gpiochip_remove(&bg
->gpio
);
240 bgwrite(0, BT848_INT_MASK
);
241 bgwrite(~0x0, BT848_INT_STAT
);
242 bgwrite(0x0, BT848_GPIO_OUT_EN
);
244 pci_disable_device(pdev
);
248 static int bt8xxgpio_suspend(struct pci_dev
*pdev
, pm_message_t state
)
250 struct bt8xxgpio
*bg
= pci_get_drvdata(pdev
);
253 spin_lock_irqsave(&bg
->lock
, flags
);
255 bg
->saved_outen
= bgread(BT848_GPIO_OUT_EN
);
256 bg
->saved_data
= bgread(BT848_GPIO_DATA
);
258 bgwrite(0, BT848_INT_MASK
);
259 bgwrite(~0x0, BT848_INT_STAT
);
260 bgwrite(0x0, BT848_GPIO_OUT_EN
);
262 spin_unlock_irqrestore(&bg
->lock
, flags
);
264 pci_save_state(pdev
);
265 pci_disable_device(pdev
);
266 pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
271 static int bt8xxgpio_resume(struct pci_dev
*pdev
)
273 struct bt8xxgpio
*bg
= pci_get_drvdata(pdev
);
277 pci_set_power_state(pdev
, PCI_D0
);
278 err
= pci_enable_device(pdev
);
281 pci_restore_state(pdev
);
283 spin_lock_irqsave(&bg
->lock
, flags
);
285 bgwrite(0, BT848_INT_MASK
);
286 bgwrite(0, BT848_GPIO_DMA_CTL
);
287 bgwrite(0, BT848_GPIO_REG_INP
);
288 bgwrite(bg
->saved_outen
, BT848_GPIO_OUT_EN
);
289 bgwrite(bg
->saved_data
& bg
->saved_outen
,
292 spin_unlock_irqrestore(&bg
->lock
, flags
);
297 #define bt8xxgpio_suspend NULL
298 #define bt8xxgpio_resume NULL
299 #endif /* CONFIG_PM */
301 static const struct pci_device_id bt8xxgpio_pci_tbl
[] = {
302 { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE
, PCI_DEVICE_ID_BT848
) },
303 { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE
, PCI_DEVICE_ID_BT849
) },
304 { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE
, PCI_DEVICE_ID_BT878
) },
305 { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE
, PCI_DEVICE_ID_BT879
) },
308 MODULE_DEVICE_TABLE(pci
, bt8xxgpio_pci_tbl
);
310 static struct pci_driver bt8xxgpio_pci_driver
= {
312 .id_table
= bt8xxgpio_pci_tbl
,
313 .probe
= bt8xxgpio_probe
,
314 .remove
= bt8xxgpio_remove
,
315 .suspend
= bt8xxgpio_suspend
,
316 .resume
= bt8xxgpio_resume
,
319 module_pci_driver(bt8xxgpio_pci_driver
);
321 MODULE_LICENSE("GPL");
322 MODULE_AUTHOR("Michael Buesch");
323 MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");