arch/arc/boot/dts/axc003.dtsi

   1 /*
   2  * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * Device tree for AXC003 CPU card: HS38x UP configuration
  11  */
  12
  13 /include/ "skeleton_hs.dtsi"
  14
  15 / {
  16         compatible = "snps,arc";
  17         #address-cells = <2>;
  18         #size-cells = <2>;
  19
  20         cpu_card {
  21                 compatible = "simple-bus";
  22                 #address-cells = <1>;
  23                 #size-cells = <1>;
  24
  25                 ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
  26
  27                 input_clk: input-clk {
  28                         #clock-cells = <0>;
  29                         compatible = "fixed-clock";
  30                         clock-frequency = <33333333>;
  31                 };
  32
  33                 core_clk: core-clk@80 {
  34                         compatible = "snps,axs10x-arc-pll-clock";
  35                         reg = <0x80 0x10>, <0x100 0x10>;
  36                         #clock-cells = <0>;
  37                         clocks = <&input_clk>;
  38
  39                         /*
  40                          * Set initial core pll output frequency to 90MHz.
  41                          * It will be applied at the core pll driver probing
  42                          * on early boot.
  43                          */
  44                         assigned-clocks = <&core_clk>;
  45                         assigned-clock-rates = <90000000>;
  46                 };
  47
  48                 core_intc: archs-intc@cpu {
  49                         compatible = "snps,archs-intc";
  50                         interrupt-controller;
  51                         #interrupt-cells = <1>;
  52                 };
  53
  54                 /*
  55                  * this GPIO block ORs all interrupts on CPU card (creg,..)
  56                  * to uplink only 1 IRQ to ARC core intc
  57                  */
  58                 dw-apb-gpio@0x2000 {
  59                         compatible = "snps,dw-apb-gpio";
  60                         reg = < 0x2000 0x80 >;
  61                         #address-cells = <1>;
  62                         #size-cells = <0>;
  63
  64                         ictl_intc: gpio-controller@0 {
  65                                 compatible = "snps,dw-apb-gpio-port";
  66                                 gpio-controller;
  67                                 #gpio-cells = <2>;
  68                                 snps,nr-gpios = <30>;
  69                                 reg = <0>;
  70                                 interrupt-controller;
  71                                 #interrupt-cells = <2>;
  72                                 interrupt-parent = <&core_intc>;
  73                                 interrupts = <25>;
  74                         };
  75                 };
  76
  77                 debug_uart: dw-apb-uart@0x5000 {
  78                         compatible = "snps,dw-apb-uart";
  79                         reg = <0x5000 0x100>;
  80                         clock-frequency = <33333000>;
  81                         interrupt-parent = <&ictl_intc>;
  82                         interrupts = <2 4>;
  83                         baud = <115200>;
  84                         reg-shift = <2>;
  85                         reg-io-width = <4>;
  86                 };
  87
  88                 arcpct0: pct {
  89                         compatible = "snps,archs-pct";
  90                         #interrupt-cells = <1>;
  91                         interrupt-parent = <&core_intc>;
  92                         interrupts = <20>;
  93                 };
  94         };
  95
  96         /*
  97          * The DW APB ICTL intc on MB is connected to CPU intc via a
  98          * DT "invisible" DW APB GPIO block, configured to simply pass thru
  99          * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
 100          *
 101          * So here we mimic a direct connection betwen them, ignoring the
 102          * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
 103          * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
 104          *
 105          * This intc actually resides on MB, but we move it here to
 106          * avoid duplicating the MB dtsi file given that IRQ from
 107          * this intc to cpu intc are different for axs101 and axs103
 108          */
 109         mb_intc: dw-apb-ictl@0xe0012000 {
 110                 #interrupt-cells = <1>;
 111                 compatible = "snps,dw-apb-ictl";
 112                 reg = < 0x0 0xe0012000 0x0 0x200 >;
 113                 interrupt-controller;
 114                 interrupt-parent = <&core_intc>;
 115                 interrupts = < 24 >;
 116         };
 117
 118         memory {
 119                 device_type = "memory";
 120                 /* CONFIG_LINUX_RAM_BASE needs to match low mem start */
 121                 reg = <0x0 0x80000000 0x0 0x20000000    /* 512 MiB low mem */
 122                        0x1 0xc0000000 0x0 0x40000000>;  /* 1 GiB highmem */
 123         };
 124
 125         reserved-memory {
 126                 #address-cells = <2>;
 127                 #size-cells = <2>;
 128                 ranges;
 129                 /*
 130                  * Move frame buffer out of IOC aperture (0x8z-0xAz).
 131                  */
 132                 frame_buffer: frame_buffer@be000000 {
 133                         compatible = "shared-dma-pool";
 134                         reg = <0x0 0xbe000000 0x0 0x2000000>;
 135                         no-map;
 136                 };
 137         };
 138 };