Linux 4.18.10
[linux/fpc-iii.git] / drivers / cpufreq / s3c64xx-cpufreq.c
blob0cb9040eca49c3c84fb852f674f649f213bfd3e7
1 /*
2 * Copyright 2009 Wolfson Microelectronics plc
4 * S3C64xx CPUfreq Support
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
11 #define pr_fmt(fmt) "cpufreq: " fmt
13 #include <linux/kernel.h>
14 #include <linux/types.h>
15 #include <linux/init.h>
16 #include <linux/cpufreq.h>
17 #include <linux/clk.h>
18 #include <linux/err.h>
19 #include <linux/regulator/consumer.h>
20 #include <linux/module.h>
22 static struct regulator *vddarm;
23 static unsigned long regulator_latency;
25 #ifdef CONFIG_CPU_S3C6410
26 struct s3c64xx_dvfs {
27 unsigned int vddarm_min;
28 unsigned int vddarm_max;
31 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
32 [0] = { 1000000, 1150000 },
33 [1] = { 1050000, 1150000 },
34 [2] = { 1100000, 1150000 },
35 [3] = { 1200000, 1350000 },
36 [4] = { 1300000, 1350000 },
39 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
40 { 0, 0, 66000 },
41 { 0, 0, 100000 },
42 { 0, 0, 133000 },
43 { 0, 1, 200000 },
44 { 0, 1, 222000 },
45 { 0, 1, 266000 },
46 { 0, 2, 333000 },
47 { 0, 2, 400000 },
48 { 0, 2, 532000 },
49 { 0, 2, 533000 },
50 { 0, 3, 667000 },
51 { 0, 4, 800000 },
52 { 0, 0, CPUFREQ_TABLE_END },
54 #endif
56 static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
57 unsigned int index)
59 struct s3c64xx_dvfs *dvfs;
60 unsigned int old_freq, new_freq;
61 int ret;
63 old_freq = clk_get_rate(policy->clk) / 1000;
64 new_freq = s3c64xx_freq_table[index].frequency;
65 dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
67 #ifdef CONFIG_REGULATOR
68 if (vddarm && new_freq > old_freq) {
69 ret = regulator_set_voltage(vddarm,
70 dvfs->vddarm_min,
71 dvfs->vddarm_max);
72 if (ret != 0) {
73 pr_err("Failed to set VDDARM for %dkHz: %d\n",
74 new_freq, ret);
75 return ret;
78 #endif
80 ret = clk_set_rate(policy->clk, new_freq * 1000);
81 if (ret < 0) {
82 pr_err("Failed to set rate %dkHz: %d\n",
83 new_freq, ret);
84 return ret;
87 #ifdef CONFIG_REGULATOR
88 if (vddarm && new_freq < old_freq) {
89 ret = regulator_set_voltage(vddarm,
90 dvfs->vddarm_min,
91 dvfs->vddarm_max);
92 if (ret != 0) {
93 pr_err("Failed to set VDDARM for %dkHz: %d\n",
94 new_freq, ret);
95 if (clk_set_rate(policy->clk, old_freq * 1000) < 0)
96 pr_err("Failed to restore original clock rate\n");
98 return ret;
101 #endif
103 pr_debug("Set actual frequency %lukHz\n",
104 clk_get_rate(policy->clk) / 1000);
106 return 0;
109 #ifdef CONFIG_REGULATOR
110 static void s3c64xx_cpufreq_config_regulator(void)
112 int count, v, i, found;
113 struct cpufreq_frequency_table *freq;
114 struct s3c64xx_dvfs *dvfs;
116 count = regulator_count_voltages(vddarm);
117 if (count < 0) {
118 pr_err("Unable to check supported voltages\n");
121 if (!count)
122 goto out;
124 cpufreq_for_each_valid_entry(freq, s3c64xx_freq_table) {
125 dvfs = &s3c64xx_dvfs_table[freq->driver_data];
126 found = 0;
128 for (i = 0; i < count; i++) {
129 v = regulator_list_voltage(vddarm, i);
130 if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
131 found = 1;
134 if (!found) {
135 pr_debug("%dkHz unsupported by regulator\n",
136 freq->frequency);
137 freq->frequency = CPUFREQ_ENTRY_INVALID;
141 out:
142 /* Guess based on having to do an I2C/SPI write; in future we
143 * will be able to query the regulator performance here. */
144 regulator_latency = 1 * 1000 * 1000;
146 #endif
148 static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
150 int ret;
151 struct cpufreq_frequency_table *freq;
153 if (policy->cpu != 0)
154 return -EINVAL;
156 if (s3c64xx_freq_table == NULL) {
157 pr_err("No frequency information for this CPU\n");
158 return -ENODEV;
161 policy->clk = clk_get(NULL, "armclk");
162 if (IS_ERR(policy->clk)) {
163 pr_err("Unable to obtain ARMCLK: %ld\n",
164 PTR_ERR(policy->clk));
165 return PTR_ERR(policy->clk);
168 #ifdef CONFIG_REGULATOR
169 vddarm = regulator_get(NULL, "vddarm");
170 if (IS_ERR(vddarm)) {
171 ret = PTR_ERR(vddarm);
172 pr_err("Failed to obtain VDDARM: %d\n", ret);
173 pr_err("Only frequency scaling available\n");
174 vddarm = NULL;
175 } else {
176 s3c64xx_cpufreq_config_regulator();
178 #endif
180 cpufreq_for_each_entry(freq, s3c64xx_freq_table) {
181 unsigned long r;
183 /* Check for frequencies we can generate */
184 r = clk_round_rate(policy->clk, freq->frequency * 1000);
185 r /= 1000;
186 if (r != freq->frequency) {
187 pr_debug("%dkHz unsupported by clock\n",
188 freq->frequency);
189 freq->frequency = CPUFREQ_ENTRY_INVALID;
192 /* If we have no regulator then assume startup
193 * frequency is the maximum we can support. */
194 if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000)
195 freq->frequency = CPUFREQ_ENTRY_INVALID;
198 /* Datasheet says PLL stabalisation time (if we were to use
199 * the PLLs, which we don't currently) is ~300us worst case,
200 * but add some fudge.
202 ret = cpufreq_generic_init(policy, s3c64xx_freq_table,
203 (500 * 1000) + regulator_latency);
204 if (ret != 0) {
205 pr_err("Failed to configure frequency table: %d\n",
206 ret);
207 regulator_put(vddarm);
208 clk_put(policy->clk);
211 return ret;
214 static struct cpufreq_driver s3c64xx_cpufreq_driver = {
215 .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
216 .verify = cpufreq_generic_frequency_table_verify,
217 .target_index = s3c64xx_cpufreq_set_target,
218 .get = cpufreq_generic_get,
219 .init = s3c64xx_cpufreq_driver_init,
220 .name = "s3c",
223 static int __init s3c64xx_cpufreq_init(void)
225 return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
227 module_init(s3c64xx_cpufreq_init);