?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.18.10
[linux/fpc-iii.git] / drivers / isdn / hardware / eicon / os_pri.c
blobb20f1fb89d14a76601e563d3afe4641d849d357e
1 // SPDX-License-Identifier: GPL-2.0
2 /* $Id: os_pri.c,v 1.32 2004/03/21 17:26:01 armin Exp $ */
3
4 #include "platform.h"
5 #include "debuglib.h"
6 #include "cardtype.h"
7 #include "pc.h"
8 #include "pr_pc.h"
9 #include "di_defs.h"
10 #include "dsp_defs.h"
11 #include "di.h"
12 #include "io.h"
13
14 #include "xdi_msg.h"
15 #include "xdi_adapter.h"
16 #include "os_pri.h"
17 #include "diva_pci.h"
18 #include "mi_pc.h"
19 #include "pc_maint.h"
20 #include "dsp_tst.h"
21 #include "diva_dma.h"
22 #include "dsrv_pri.h"
23
24 /* --------------------------------------------------------------------------
25 OS Dependent part of XDI driver for DIVA PRI Adapter
26
27 DSP detection/validation by Anthony Booth (Eicon Networks, www.eicon.com)
28 -------------------------------------------------------------------------- */
29
30 #define DIVA_PRI_NO_PCI_BIOS_WORKAROUND 1
31
32 extern int diva_card_read_xlog(diva_os_xdi_adapter_t *a);
33
34 /*
35 ** IMPORTS
36 */
37 extern void prepare_pri_functions(PISDN_ADAPTER IoAdapter);
38 extern void prepare_pri2_functions(PISDN_ADAPTER IoAdapter);
39 extern void diva_xdi_display_adapter_features(int card);
40
41 static int diva_pri_cleanup_adapter(diva_os_xdi_adapter_t *a);
42 static int diva_pri_cmd_card_proc(struct _diva_os_xdi_adapter *a,
43 diva_xdi_um_cfg_cmd_t *cmd, int length);
44 static int pri_get_serial_number(diva_os_xdi_adapter_t *a);
45 static int diva_pri_stop_adapter(diva_os_xdi_adapter_t *a);
46 static dword diva_pri_detect_dsps(diva_os_xdi_adapter_t *a);
47
48 /*
49 ** Check card revision
50 */
51 static int pri_is_rev_2_card(int card_ordinal)
52 {
53 switch (card_ordinal) {
54 case CARDTYPE_DIVASRV_P_30M_V2_PCI:
55 case CARDTYPE_DIVASRV_VOICE_P_30M_V2_PCI:
56 return (1);
57 }
58 return (0);
59 }
60
61 static void diva_pri_set_addresses(diva_os_xdi_adapter_t *a)
62 {
63 a->resources.pci.mem_type_id[MEM_TYPE_ADDRESS] = 0;
64 a->resources.pci.mem_type_id[MEM_TYPE_CONTROL] = 2;
65 a->resources.pci.mem_type_id[MEM_TYPE_CONFIG] = 4;
66 a->resources.pci.mem_type_id[MEM_TYPE_RAM] = 0;
67 a->resources.pci.mem_type_id[MEM_TYPE_RESET] = 2;
68 a->resources.pci.mem_type_id[MEM_TYPE_CFG] = 4;
69 a->resources.pci.mem_type_id[MEM_TYPE_PROM] = 3;
70
71 a->xdi_adapter.Address = a->resources.pci.addr[0];
72 a->xdi_adapter.Control = a->resources.pci.addr[2];
73 a->xdi_adapter.Config = a->resources.pci.addr[4];
74
75 a->xdi_adapter.ram = a->resources.pci.addr[0];
76 a->xdi_adapter.ram += MP_SHARED_RAM_OFFSET;
77
78 a->xdi_adapter.reset = a->resources.pci.addr[2];
79 a->xdi_adapter.reset += MP_RESET;
80
81 a->xdi_adapter.cfg = a->resources.pci.addr[4];
82 a->xdi_adapter.cfg += MP_IRQ_RESET;
83
84 a->xdi_adapter.sdram_bar = a->resources.pci.bar[0];
85
86 a->xdi_adapter.prom = a->resources.pci.addr[3];
87 }
88
89 /*
90 ** BAR0 - SDRAM, MP_MEMORY_SIZE, MP2_MEMORY_SIZE by Rev.2
91 ** BAR1 - DEVICES, 0x1000
92 ** BAR2 - CONTROL (REG), 0x2000
93 ** BAR3 - FLASH (REG), 0x8000
94 ** BAR4 - CONFIG (CFG), 0x1000
95 */
96 int diva_pri_init_card(diva_os_xdi_adapter_t *a)
97 {
98 int bar = 0;
99 int pri_rev_2;
100 unsigned long bar_length[5] = {
101 MP_MEMORY_SIZE,
102 0x1000,
103 0x2000,
104 0x8000,
105 0x1000
106 };
107
108 pri_rev_2 = pri_is_rev_2_card(a->CardOrdinal);
109
110 if (pri_rev_2) {
111 bar_length[0] = MP2_MEMORY_SIZE;
112 }
113 /*
114 Set properties
115 */
116 a->xdi_adapter.Properties = CardProperties[a->CardOrdinal];
117 DBG_LOG(("Load %s", a->xdi_adapter.Properties.Name))
118
119 /*
120 First initialization step: get and check hardware resoures.
121 Do not map resources and do not acecess card at this step
122 */
123 for (bar = 0; bar < 5; bar++) {
124 a->resources.pci.bar[bar] =
125 divasa_get_pci_bar(a->resources.pci.bus,
126 a->resources.pci.func, bar,
127 a->resources.pci.hdev);
128 if (!a->resources.pci.bar[bar]
129 || (a->resources.pci.bar[bar] == 0xFFFFFFF0)) {
130 DBG_ERR(("A: invalid bar[%d]=%08x", bar,
131 a->resources.pci.bar[bar]))
132 return (-1);
133 }
134 }
135 a->resources.pci.irq =
136 (byte) divasa_get_pci_irq(a->resources.pci.bus,
137 a->resources.pci.func,
138 a->resources.pci.hdev);
139 if (!a->resources.pci.irq) {
140 DBG_ERR(("A: invalid irq"));
141 return (-1);
142 }
143
144 /*
145 Map all BAR's
146 */
147 for (bar = 0; bar < 5; bar++) {
148 a->resources.pci.addr[bar] =
149 divasa_remap_pci_bar(a, bar, a->resources.pci.bar[bar],
150 bar_length[bar]);
151 if (!a->resources.pci.addr[bar]) {
152 DBG_ERR(("A: A(%d), can't map bar[%d]",
153 a->controller, bar))
154 diva_pri_cleanup_adapter(a);
155 return (-1);
156 }
157 }
158
159 /*
160 Set all memory areas
161 */
162 diva_pri_set_addresses(a);
163
164 /*
165 Get Serial Number of this adapter
166 */
167 if (pri_get_serial_number(a)) {
168 dword serNo;
169 serNo = a->resources.pci.bar[1] & 0xffff0000;
170 serNo |= ((dword) a->resources.pci.bus) << 8;
171 serNo += (a->resources.pci.func + a->controller + 1);
172 a->xdi_adapter.serialNo = serNo & ~0xFF000000;
173 DBG_ERR(("A: A(%d) can't get Serial Number, generated serNo=%ld",
174 a->controller, a->xdi_adapter.serialNo))
175 }
176
177
178 /*
179 Initialize os objects
180 */
181 if (diva_os_initialize_spin_lock(&a->xdi_adapter.isr_spin_lock, "isr")) {
182 diva_pri_cleanup_adapter(a);
183 return (-1);
184 }
185 if (diva_os_initialize_spin_lock
186 (&a->xdi_adapter.data_spin_lock, "data")) {
187 diva_pri_cleanup_adapter(a);
188 return (-1);
189 }
190
191 strcpy(a->xdi_adapter.req_soft_isr.dpc_thread_name, "kdivasprid");
192
193 if (diva_os_initialize_soft_isr(&a->xdi_adapter.req_soft_isr,
194 DIDpcRoutine, &a->xdi_adapter)) {
195 diva_pri_cleanup_adapter(a);
196 return (-1);
197 }
198
199 /*
200 Do not initialize second DPC - only one thread will be created
201 */
202 a->xdi_adapter.isr_soft_isr.object =
203 a->xdi_adapter.req_soft_isr.object;
204
205 /*
206 Next step of card initialization:
207 set up all interface pointers
208 */
209 a->xdi_adapter.Channels = CardProperties[a->CardOrdinal].Channels;
210 a->xdi_adapter.e_max = CardProperties[a->CardOrdinal].E_info;
211
212 a->xdi_adapter.e_tbl =
213 diva_os_malloc(0, a->xdi_adapter.e_max * sizeof(E_INFO));
214 if (!a->xdi_adapter.e_tbl) {
215 diva_pri_cleanup_adapter(a);
216 return (-1);
217 }
218 memset(a->xdi_adapter.e_tbl, 0x00, a->xdi_adapter.e_max * sizeof(E_INFO));
219
220 a->xdi_adapter.a.io = &a->xdi_adapter;
221 a->xdi_adapter.DIRequest = request;
222 a->interface.cleanup_adapter_proc = diva_pri_cleanup_adapter;
223 a->interface.cmd_proc = diva_pri_cmd_card_proc;
224
225 if (pri_rev_2) {
226 prepare_pri2_functions(&a->xdi_adapter);
227 } else {
228 prepare_pri_functions(&a->xdi_adapter);
229 }
230
231 a->dsp_mask = diva_pri_detect_dsps(a);
232
233 /*
234 Allocate DMA map
235 */
236 if (pri_rev_2) {
237 diva_init_dma_map(a->resources.pci.hdev,
238 (struct _diva_dma_map_entry **) &a->xdi_adapter.dma_map, 32);
239 }
240
241 /*
242 Set IRQ handler
243 */
244 a->xdi_adapter.irq_info.irq_nr = a->resources.pci.irq;
245 sprintf(a->xdi_adapter.irq_info.irq_name,
246 "DIVA PRI %ld", (long) a->xdi_adapter.serialNo);
247
248 if (diva_os_register_irq(a, a->xdi_adapter.irq_info.irq_nr,
249 a->xdi_adapter.irq_info.irq_name)) {
250 diva_pri_cleanup_adapter(a);
251 return (-1);
252 }
253 a->xdi_adapter.irq_info.registered = 1;
254
255 diva_log_info("%s IRQ:%d SerNo:%d", a->xdi_adapter.Properties.Name,
256 a->resources.pci.irq, a->xdi_adapter.serialNo);
257
258 return (0);
259 }
260
261 static int diva_pri_cleanup_adapter(diva_os_xdi_adapter_t *a)
262 {
263 int bar = 0;
264
265 /*
266 Stop Adapter if adapter is running
267 */
268 if (a->xdi_adapter.Initialized) {
269 diva_pri_stop_adapter(a);
270 }
271
272 /*
273 Remove ISR Handler
274 */
275 if (a->xdi_adapter.irq_info.registered) {
276 diva_os_remove_irq(a, a->xdi_adapter.irq_info.irq_nr);
277 }
278 a->xdi_adapter.irq_info.registered = 0;
279
280 /*
281 Step 1: unmap all BAR's, if any was mapped
282 */
283 for (bar = 0; bar < 5; bar++) {
284 if (a->resources.pci.bar[bar]
285 && a->resources.pci.addr[bar]) {
286 divasa_unmap_pci_bar(a->resources.pci.addr[bar]);
287 a->resources.pci.bar[bar] = 0;
288 a->resources.pci.addr[bar] = NULL;
289 }
290 }
291
292 /*
293 Free OS objects
294 */
295 diva_os_cancel_soft_isr(&a->xdi_adapter.isr_soft_isr);
296 diva_os_cancel_soft_isr(&a->xdi_adapter.req_soft_isr);
297
298 diva_os_remove_soft_isr(&a->xdi_adapter.req_soft_isr);
299 a->xdi_adapter.isr_soft_isr.object = NULL;
300
301 diva_os_destroy_spin_lock(&a->xdi_adapter.isr_spin_lock, "rm");
302 diva_os_destroy_spin_lock(&a->xdi_adapter.data_spin_lock, "rm");
303
304 /*
305 Free memory accupied by XDI adapter
306 */
307 if (a->xdi_adapter.e_tbl) {
308 diva_os_free(0, a->xdi_adapter.e_tbl);
309 a->xdi_adapter.e_tbl = NULL;
310 }
311 a->xdi_adapter.Channels = 0;
312 a->xdi_adapter.e_max = 0;
313
314
315 /*
316 Free adapter DMA map
317 */
318 diva_free_dma_map(a->resources.pci.hdev,
319 (struct _diva_dma_map_entry *) a->xdi_adapter.
320 dma_map);
321 a->xdi_adapter.dma_map = NULL;
322
323
324 /*
325 Detach this adapter from debug driver
326 */
327
328 return (0);
329 }
330
331 /*
332 ** Activate On Board Boot Loader
333 */
334 static int diva_pri_reset_adapter(PISDN_ADAPTER IoAdapter)
335 {
336 dword i;
337 struct mp_load __iomem *boot;
338
339 if (!IoAdapter->Address || !IoAdapter->reset) {
340 return (-1);
341 }
342 if (IoAdapter->Initialized) {
343 DBG_ERR(("A: A(%d) can't reset PRI adapter - please stop first",
344 IoAdapter->ANum))
345 return (-1);
346 }
347
348 boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter);
349 WRITE_DWORD(&boot->err, 0);
350 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
351
352 IoAdapter->rstFnc(IoAdapter);
353
354 diva_os_wait(10);
355
356 boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter);
357 i = READ_DWORD(&boot->live);
358
359 diva_os_wait(10);
360 if (i == READ_DWORD(&boot->live)) {
361 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
362 DBG_ERR(("A: A(%d) CPU on PRI %ld is not alive!",
363 IoAdapter->ANum, IoAdapter->serialNo))
364 return (-1);
365 }
366 if (READ_DWORD(&boot->err)) {
367 DBG_ERR(("A: A(%d) PRI %ld Board Selftest failed, error=%08lx",
368 IoAdapter->ANum, IoAdapter->serialNo,
369 READ_DWORD(&boot->err)))
370 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
371 return (-1);
372 }
373 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
374
375 /*
376 Forget all outstanding entities
377 */
378 IoAdapter->e_count = 0;
379 if (IoAdapter->e_tbl) {
380 memset(IoAdapter->e_tbl, 0x00,
381 IoAdapter->e_max * sizeof(E_INFO));
382 }
383 IoAdapter->head = 0;
384 IoAdapter->tail = 0;
385 IoAdapter->assign = 0;
386 IoAdapter->trapped = 0;
387
388 memset(&IoAdapter->a.IdTable[0], 0x00,
389 sizeof(IoAdapter->a.IdTable));
390 memset(&IoAdapter->a.IdTypeTable[0], 0x00,
391 sizeof(IoAdapter->a.IdTypeTable));
392 memset(&IoAdapter->a.FlowControlIdTable[0], 0x00,
393 sizeof(IoAdapter->a.FlowControlIdTable));
394 memset(&IoAdapter->a.FlowControlSkipTable[0], 0x00,
395 sizeof(IoAdapter->a.FlowControlSkipTable));
396 memset(&IoAdapter->a.misc_flags_table[0], 0x00,
397 sizeof(IoAdapter->a.misc_flags_table));
398 memset(&IoAdapter->a.rx_stream[0], 0x00,
399 sizeof(IoAdapter->a.rx_stream));
400 memset(&IoAdapter->a.tx_stream[0], 0x00,
401 sizeof(IoAdapter->a.tx_stream));
402 memset(&IoAdapter->a.tx_pos[0], 0x00, sizeof(IoAdapter->a.tx_pos));
403 memset(&IoAdapter->a.rx_pos[0], 0x00, sizeof(IoAdapter->a.rx_pos));
404
405 return (0);
406 }
407
408 static int
409 diva_pri_write_sdram_block(PISDN_ADAPTER IoAdapter,
410 dword address,
411 const byte *data, dword length, dword limit)
412 {
413 byte __iomem *p = DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter);
414 byte __iomem *mem = p;
415
416 if (((address + length) >= limit) || !mem) {
417 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, p);
418 DBG_ERR(("A: A(%d) write PRI address=0x%08lx",
419 IoAdapter->ANum, address + length))
420 return (-1);
421 }
422 mem += address;
423
424 /* memcpy_toio(), maybe? */
425 while (length--) {
426 WRITE_BYTE(mem++, *data++);
427 }
428
429 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, p);
430 return (0);
431 }
432
433 static int
434 diva_pri_start_adapter(PISDN_ADAPTER IoAdapter,
435 dword start_address, dword features)
436 {
437 dword i;
438 int started = 0;
439 byte __iomem *p;
440 struct mp_load __iomem *boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter);
441 ADAPTER *a = &IoAdapter->a;
442
443 if (IoAdapter->Initialized) {
444 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
445 DBG_ERR(("A: A(%d) pri_start_adapter, adapter already running",
446 IoAdapter->ANum))
447 return (-1);
448 }
449 if (!boot) {
450 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
451 DBG_ERR(("A: PRI %ld can't start, adapter not mapped",
452 IoAdapter->serialNo))
453 return (-1);
454 }
455
456 sprintf(IoAdapter->Name, "A(%d)", (int) IoAdapter->ANum);
457 DBG_LOG(("A(%d) start PRI at 0x%08lx", IoAdapter->ANum,
458 start_address))
459
460 WRITE_DWORD(&boot->addr, start_address);
461 WRITE_DWORD(&boot->cmd, 3);
462
463 for (i = 0; i < 300; ++i) {
464 diva_os_wait(10);
465 if ((READ_DWORD(&boot->signature) >> 16) == 0x4447) {
466 DBG_LOG(("A(%d) Protocol startup time %d.%02d seconds",
467 IoAdapter->ANum, (i / 100), (i % 100)))
468 started = 1;
469 break;
470 }
471 }
472
473 if (!started) {
474 byte __iomem *p = (byte __iomem *)boot;
475 dword TrapId;
476 dword debug;
477 TrapId = READ_DWORD(&p[0x80]);
478 debug = READ_DWORD(&p[0x1c]);
479 DBG_ERR(("A(%d) Adapter start failed 0x%08lx, TrapId=%08lx, debug=%08lx",
480 IoAdapter->ANum, READ_DWORD(&boot->signature),
481 TrapId, debug))
482 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
483 if (IoAdapter->trapFnc) {
484 (*(IoAdapter->trapFnc)) (IoAdapter);
485 }
486 IoAdapter->stop(IoAdapter);
487 return (-1);
488 }
489 DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot);
490
491 IoAdapter->Initialized = true;
492
493 /*
494 Check Interrupt
495 */
496 IoAdapter->IrqCount = 0;
497 p = DIVA_OS_MEM_ATTACH_CFG(IoAdapter);
498 WRITE_DWORD(p, (dword)~0x03E00000);
499 DIVA_OS_MEM_DETACH_CFG(IoAdapter, p);
500 a->ReadyInt = 1;
501 a->ram_out(a, &PR_RAM->ReadyInt, 1);
502
503 for (i = 100; !IoAdapter->IrqCount && (i-- > 0); diva_os_wait(10));
504
505 if (!IoAdapter->IrqCount) {
506 DBG_ERR(("A: A(%d) interrupt test failed",
507 IoAdapter->ANum))
508 IoAdapter->Initialized = false;
509 IoAdapter->stop(IoAdapter);
510 return (-1);
511 }
512
513 IoAdapter->Properties.Features = (word) features;
514
515 diva_xdi_display_adapter_features(IoAdapter->ANum);
516
517 DBG_LOG(("A(%d) PRI adapter successfully started", IoAdapter->ANum))
518 /*
519 Register with DIDD
520 */
521 diva_xdi_didd_register_adapter(IoAdapter->ANum);
522
523 return (0);
524 }
525
526 static void diva_pri_clear_interrupts(diva_os_xdi_adapter_t *a)
527 {
528 PISDN_ADAPTER IoAdapter = &a->xdi_adapter;
529
530 /*
531 clear any pending interrupt
532 */
533 IoAdapter->disIrq(IoAdapter);
534
535 IoAdapter->tst_irq(&IoAdapter->a);
536 IoAdapter->clr_irq(&IoAdapter->a);
537 IoAdapter->tst_irq(&IoAdapter->a);
538
539 /*
540 kill pending dpcs
541 */
542 diva_os_cancel_soft_isr(&IoAdapter->req_soft_isr);
543 diva_os_cancel_soft_isr(&IoAdapter->isr_soft_isr);
544 }
545
546 /*
547 ** Stop Adapter, but do not unmap/unregister - adapter
548 ** will be restarted later
549 */
550 static int diva_pri_stop_adapter(diva_os_xdi_adapter_t *a)
551 {
552 PISDN_ADAPTER IoAdapter = &a->xdi_adapter;
553 int i = 100;
554
555 if (!IoAdapter->ram) {
556 return (-1);
557 }
558 if (!IoAdapter->Initialized) {
559 DBG_ERR(("A: A(%d) can't stop PRI adapter - not running",
560 IoAdapter->ANum))
561 return (-1); /* nothing to stop */
562 }
563 IoAdapter->Initialized = 0;
564
565 /*
566 Disconnect Adapter from DIDD
567 */
568 diva_xdi_didd_remove_adapter(IoAdapter->ANum);
569
570 /*
571 Stop interrupts
572 */
573 a->clear_interrupts_proc = diva_pri_clear_interrupts;
574 IoAdapter->a.ReadyInt = 1;
575 IoAdapter->a.ram_inc(&IoAdapter->a, &PR_RAM->ReadyInt);
576 do {
577 diva_os_sleep(10);
578 } while (i-- && a->clear_interrupts_proc);
579
580 if (a->clear_interrupts_proc) {
581 diva_pri_clear_interrupts(a);
582 a->clear_interrupts_proc = NULL;
583 DBG_ERR(("A: A(%d) no final interrupt from PRI adapter",
584 IoAdapter->ANum))
585 }
586 IoAdapter->a.ReadyInt = 0;
587
588 /*
589 Stop and reset adapter
590 */
591 IoAdapter->stop(IoAdapter);
592
593 return (0);
594 }
595
596 /*
597 ** Process commands form configuration/download framework and from
598 ** user mode
599 **
600 ** return 0 on success
601 */
602 static int
603 diva_pri_cmd_card_proc(struct _diva_os_xdi_adapter *a,
604 diva_xdi_um_cfg_cmd_t *cmd, int length)
605 {
606 int ret = -1;
607
608 if (cmd->adapter != a->controller) {
609 DBG_ERR(("A: pri_cmd, invalid controller=%d != %d",
610 cmd->adapter, a->controller))
611 return (-1);
612 }
613
614 switch (cmd->command) {
615 case DIVA_XDI_UM_CMD_GET_CARD_ORDINAL:
616 a->xdi_mbox.data_length = sizeof(dword);
617 a->xdi_mbox.data =
618 diva_os_malloc(0, a->xdi_mbox.data_length);
619 if (a->xdi_mbox.data) {
620 *(dword *) a->xdi_mbox.data =
621 (dword) a->CardOrdinal;
622 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
623 ret = 0;
624 }
625 break;
626
627 case DIVA_XDI_UM_CMD_GET_SERIAL_NR:
628 a->xdi_mbox.data_length = sizeof(dword);
629 a->xdi_mbox.data =
630 diva_os_malloc(0, a->xdi_mbox.data_length);
631 if (a->xdi_mbox.data) {
632 *(dword *) a->xdi_mbox.data =
633 (dword) a->xdi_adapter.serialNo;
634 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
635 ret = 0;
636 }
637 break;
638
639 case DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG:
640 a->xdi_mbox.data_length = sizeof(dword) * 9;
641 a->xdi_mbox.data =
642 diva_os_malloc(0, a->xdi_mbox.data_length);
643 if (a->xdi_mbox.data) {
644 int i;
645 dword *data = (dword *) a->xdi_mbox.data;
646
647 for (i = 0; i < 8; i++) {
648 *data++ = a->resources.pci.bar[i];
649 }
650 *data++ = (dword) a->resources.pci.irq;
651 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
652 ret = 0;
653 }
654 break;
655
656 case DIVA_XDI_UM_CMD_RESET_ADAPTER:
657 ret = diva_pri_reset_adapter(&a->xdi_adapter);
658 break;
659
660 case DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK:
661 ret = diva_pri_write_sdram_block(&a->xdi_adapter,
662 cmd->command_data.
663 write_sdram.offset,
664 (byte *)&cmd[1],
665 cmd->command_data.
666 write_sdram.length,
667 pri_is_rev_2_card(a->
668 CardOrdinal)
669 ? MP2_MEMORY_SIZE :
670 MP_MEMORY_SIZE);
671 break;
672
673 case DIVA_XDI_UM_CMD_STOP_ADAPTER:
674 ret = diva_pri_stop_adapter(a);
675 break;
676
677 case DIVA_XDI_UM_CMD_START_ADAPTER:
678 ret = diva_pri_start_adapter(&a->xdi_adapter,
679 cmd->command_data.start.
680 offset,
681 cmd->command_data.start.
682 features);
683 break;
684
685 case DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES:
686 a->xdi_adapter.features =
687 cmd->command_data.features.features;
688 a->xdi_adapter.a.protocol_capabilities =
689 a->xdi_adapter.features;
690 DBG_TRC(("Set raw protocol features (%08x)",
691 a->xdi_adapter.features))
692 ret = 0;
693 break;
694
695 case DIVA_XDI_UM_CMD_GET_CARD_STATE:
696 a->xdi_mbox.data_length = sizeof(dword);
697 a->xdi_mbox.data =
698 diva_os_malloc(0, a->xdi_mbox.data_length);
699 if (a->xdi_mbox.data) {
700 dword *data = (dword *) a->xdi_mbox.data;
701 if (!a->xdi_adapter.ram ||
702 !a->xdi_adapter.reset ||
703 !a->xdi_adapter.cfg) {
704 *data = 3;
705 } else if (a->xdi_adapter.trapped) {
706 *data = 2;
707 } else if (a->xdi_adapter.Initialized) {
708 *data = 1;
709 } else {
710 *data = 0;
711 }
712 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
713 ret = 0;
714 }
715 break;
716
717 case DIVA_XDI_UM_CMD_READ_XLOG_ENTRY:
718 ret = diva_card_read_xlog(a);
719 break;
720
721 case DIVA_XDI_UM_CMD_READ_SDRAM:
722 if (a->xdi_adapter.Address) {
723 if (
724 (a->xdi_mbox.data_length =
725 cmd->command_data.read_sdram.length)) {
726 if (
727 (a->xdi_mbox.data_length +
728 cmd->command_data.read_sdram.offset) <
729 a->xdi_adapter.MemorySize) {
730 a->xdi_mbox.data =
731 diva_os_malloc(0,
732 a->xdi_mbox.
733 data_length);
734 if (a->xdi_mbox.data) {
735 byte __iomem *p = DIVA_OS_MEM_ATTACH_ADDRESS(&a->xdi_adapter);
736 byte __iomem *src = p;
737 byte *dst = a->xdi_mbox.data;
738 dword len = a->xdi_mbox.data_length;
739
740 src += cmd->command_data.read_sdram.offset;
741
742 while (len--) {
743 *dst++ = READ_BYTE(src++);
744 }
745 a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
746 DIVA_OS_MEM_DETACH_ADDRESS(&a->xdi_adapter, p);
747 ret = 0;
748 }
749 }
750 }
751 }
752 break;
753
754 default:
755 DBG_ERR(("A: A(%d) invalid cmd=%d", a->controller,
756 cmd->command))
757 }
758
759 return (ret);
760 }
761
762 /*
763 ** Get Serial Number
764 */
765 static int pri_get_serial_number(diva_os_xdi_adapter_t *a)
766 {
767 byte data[64];
768 int i;
769 dword len = sizeof(data);
770 volatile byte __iomem *config;
771 volatile byte __iomem *flash;
772 byte c;
773
774 /*
775 * First set some GT6401x config registers before accessing the BOOT-ROM
776 */
777 config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter);
778 c = READ_BYTE(&config[0xc3c]);
779 if (!(c & 0x08)) {
780 WRITE_BYTE(&config[0xc3c], c); /* Base Address enable register */
781 }
782 WRITE_BYTE(&config[LOW_BOOTCS_DREG], 0x00);
783 WRITE_BYTE(&config[HI_BOOTCS_DREG], 0xFF);
784 DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config);
785 /*
786 * Read only the last 64 bytes of manufacturing data
787 */
788 memset(data, '\0', len);
789 flash = DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter);
790 for (i = 0; i < len; i++) {
791 data[i] = READ_BYTE(&flash[0x8000 - len + i]);
792 }
793 DIVA_OS_MEM_DETACH_PROM(&a->xdi_adapter, flash);
794
795 config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter);
796 WRITE_BYTE(&config[LOW_BOOTCS_DREG], 0xFC); /* Disable FLASH EPROM access */
797 WRITE_BYTE(&config[HI_BOOTCS_DREG], 0xFF);
798 DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config);
799
800 if (memcmp(&data[48], "DIVAserverPR", 12)) {
801 #if !defined(DIVA_PRI_NO_PCI_BIOS_WORKAROUND) /* { */
802 word cmd = 0, cmd_org;
803 void *addr;
804 dword addr1, addr3, addr4;
805 byte Bus, Slot;
806 void *hdev;
807 addr4 = a->resources.pci.bar[4];
808 addr3 = a->resources.pci.bar[3]; /* flash */
809 addr1 = a->resources.pci.bar[1]; /* unused */
810
811 DBG_ERR(("A: apply Compaq BIOS workaround"))
812 DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
813 data[0], data[1], data[2], data[3],
814 data[4], data[5], data[6], data[7]))
815
816 Bus = a->resources.pci.bus;
817 Slot = a->resources.pci.func;
818 hdev = a->resources.pci.hdev;
819 PCIread(Bus, Slot, 0x04, &cmd_org, sizeof(cmd_org), hdev);
820 PCIwrite(Bus, Slot, 0x04, &cmd, sizeof(cmd), hdev);
821
822 PCIwrite(Bus, Slot, 0x14, &addr4, sizeof(addr4), hdev);
823 PCIwrite(Bus, Slot, 0x20, &addr1, sizeof(addr1), hdev);
824
825 PCIwrite(Bus, Slot, 0x04, &cmd_org, sizeof(cmd_org), hdev);
826
827 addr = a->resources.pci.addr[1];
828 a->resources.pci.addr[1] = a->resources.pci.addr[4];
829 a->resources.pci.addr[4] = addr;
830
831 addr1 = a->resources.pci.bar[1];
832 a->resources.pci.bar[1] = a->resources.pci.bar[4];
833 a->resources.pci.bar[4] = addr1;
834
835 /*
836 Try to read Flash again
837 */
838 len = sizeof(data);
839
840 config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter);
841 if (!(config[0xc3c] & 0x08)) {
842 config[0xc3c] |= 0x08; /* Base Address enable register */
843 }
844 config[LOW_BOOTCS_DREG] = 0x00;
845 config[HI_BOOTCS_DREG] = 0xFF;
846 DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config);
847
848 memset(data, '\0', len);
849 flash = DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter);
850 for (i = 0; i < len; i++) {
851 data[i] = flash[0x8000 - len + i];
852 }
853 DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter, flash);
854 config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter);
855 config[LOW_BOOTCS_DREG] = 0xFC;
856 config[HI_BOOTCS_DREG] = 0xFF;
857 DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config);
858
859 if (memcmp(&data[48], "DIVAserverPR", 12)) {
860 DBG_ERR(("A: failed to read serial number"))
861 DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
862 data[0], data[1], data[2], data[3],
863 data[4], data[5], data[6], data[7]))
864 return (-1);
865 }
866 #else /* } { */
867 DBG_ERR(("A: failed to read DIVA signature word"))
868 DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
869 data[0], data[1], data[2], data[3],
870 data[4], data[5], data[6], data[7]))
871 DBG_LOG(("%02x:%02x:%02x:%02x", data[47], data[46],
872 data[45], data[44]))
873 #endif /* } */
874 }
875
876 a->xdi_adapter.serialNo =
877 (data[47] << 24) | (data[46] << 16) | (data[45] << 8) |
878 data[44];
879 if (!a->xdi_adapter.serialNo
880 || (a->xdi_adapter.serialNo == 0xffffffff)) {
881 a->xdi_adapter.serialNo = 0;
882 DBG_ERR(("A: failed to read serial number"))
883 return (-1);
884 }
885
886 DBG_LOG(("Serial No. : %ld", a->xdi_adapter.serialNo))
887 DBG_TRC(("Board Revision : %d.%02d", (int) data[41],
888 (int) data[40]))
889 DBG_TRC(("PLD revision : %d.%02d", (int) data[33],
890 (int) data[32]))
891 DBG_TRC(("Boot loader version : %d.%02d", (int) data[37],
892 (int) data[36]))
893
894 DBG_TRC(("Manufacturing Date : %d/%02d/%02d (yyyy/mm/dd)",
895 (int) ((data[28] > 90) ? 1900 : 2000) +
896 (int) data[28], (int) data[29], (int) data[30]))
897
898 return (0);
899 }
900
901 void diva_os_prepare_pri2_functions(PISDN_ADAPTER IoAdapter)
902 {
903 }
904
905 void diva_os_prepare_pri_functions(PISDN_ADAPTER IoAdapter)
906 {
907 }
908
909 /*
910 ** Checks presence of DSP on board
911 */
912 static int
913 dsp_check_presence(volatile byte __iomem *addr, volatile byte __iomem *data, int dsp)
914 {
915 word pattern;
916
917 WRITE_WORD(addr, 0x4000);
918 WRITE_WORD(data, DSP_SIGNATURE_PROBE_WORD);
919
920 WRITE_WORD(addr, 0x4000);
921 pattern = READ_WORD(data);
922
923 if (pattern != DSP_SIGNATURE_PROBE_WORD) {
924 DBG_TRC(("W: DSP[%d] %04x(is) != %04x(should)",
925 dsp, pattern, DSP_SIGNATURE_PROBE_WORD))
926 return (-1);
927 }
928
929 WRITE_WORD(addr, 0x4000);
930 WRITE_WORD(data, ~DSP_SIGNATURE_PROBE_WORD);
931
932 WRITE_WORD(addr, 0x4000);
933 pattern = READ_WORD(data);
934
935 if (pattern != (word)~DSP_SIGNATURE_PROBE_WORD) {
936 DBG_ERR(("A: DSP[%d] %04x(is) != %04x(should)",
937 dsp, pattern, (word)~DSP_SIGNATURE_PROBE_WORD))
938 return (-2);
939 }
940
941 DBG_TRC(("DSP[%d] present", dsp))
942
943 return (0);
944 }
945
946
947 /*
948 ** Check if DSP's are present and operating
949 ** Information about detected DSP's is returned as bit mask
950 ** Bit 0 - DSP1
951 ** ...
952 ** ...
953 ** ...
954 ** Bit 29 - DSP30
955 */
956 static dword diva_pri_detect_dsps(diva_os_xdi_adapter_t *a)
957 {
958 byte __iomem *base;
959 byte __iomem *p;
960 dword ret = 0;
961 dword row_offset[7] = {
962 0x00000000,
963 0x00000800, /* 1 - ROW 1 */
964 0x00000840, /* 2 - ROW 2 */
965 0x00001000, /* 3 - ROW 3 */
966 0x00001040, /* 4 - ROW 4 */
967 0x00000000 /* 5 - ROW 0 */
968 };
969
970 byte __iomem *dsp_addr_port;
971 byte __iomem *dsp_data_port;
972 byte row_state;
973 int dsp_row = 0, dsp_index, dsp_num;
974
975 if (!a->xdi_adapter.Control || !a->xdi_adapter.reset) {
976 return (0);
977 }
978
979 p = DIVA_OS_MEM_ATTACH_RESET(&a->xdi_adapter);
980 WRITE_BYTE(p, _MP_RISC_RESET | _MP_DSP_RESET);
981 DIVA_OS_MEM_DETACH_RESET(&a->xdi_adapter, p);
982 diva_os_wait(5);
983
984 base = DIVA_OS_MEM_ATTACH_CONTROL(&a->xdi_adapter);
985
986 for (dsp_num = 0; dsp_num < 30; dsp_num++) {
987 dsp_row = dsp_num / 7 + 1;
988 dsp_index = dsp_num % 7;
989
990 dsp_data_port = base;
991 dsp_addr_port = base;
992
993 dsp_data_port += row_offset[dsp_row];
994 dsp_addr_port += row_offset[dsp_row];
995
996 dsp_data_port += (dsp_index * 8);
997 dsp_addr_port += (dsp_index * 8) + 0x80;
998
999 if (!dsp_check_presence
1000 (dsp_addr_port, dsp_data_port, dsp_num + 1)) {
1001 ret |= (1 << dsp_num);
1002 }
1003 }
1004 DIVA_OS_MEM_DETACH_CONTROL(&a->xdi_adapter, base);
1005
1006 p = DIVA_OS_MEM_ATTACH_RESET(&a->xdi_adapter);
1007 WRITE_BYTE(p, _MP_RISC_RESET | _MP_LED1 | _MP_LED2);
1008 DIVA_OS_MEM_DETACH_RESET(&a->xdi_adapter, p);
1009 diva_os_wait(5);
1010
1011 /*
1012 Verify modules
1013 */
1014 for (dsp_row = 0; dsp_row < 4; dsp_row++) {
1015 row_state = ((ret >> (dsp_row * 7)) & 0x7F);
1016 if (row_state && (row_state != 0x7F)) {
1017 for (dsp_index = 0; dsp_index < 7; dsp_index++) {
1018 if (!(row_state & (1 << dsp_index))) {
1019 DBG_ERR(("A: MODULE[%d]-DSP[%d] failed",
1020 dsp_row + 1,
1021 dsp_index + 1))
1022 }
1023 }
1024 }
1025 }
1026
1027 if (!(ret & 0x10000000)) {
1028 DBG_ERR(("A: ON BOARD-DSP[1] failed"))
1029 }
1030 if (!(ret & 0x20000000)) {
1031 DBG_ERR(("A: ON BOARD-DSP[2] failed"))
1032 }
1033
1034 /*
1035 Print module population now
1036 */
1037 DBG_LOG(("+-----------------------+"))
1038 DBG_LOG(("| DSP MODULE POPULATION |"))
1039 DBG_LOG(("+-----------------------+"))
1040 DBG_LOG(("| 1 | 2 | 3 | 4 |"))
1041 DBG_LOG(("+-----------------------+"))
1042 DBG_LOG(("| %s | %s | %s | %s |",
1043 ((ret >> (0 * 7)) & 0x7F) ? "Y" : "N",
1044 ((ret >> (1 * 7)) & 0x7F) ? "Y" : "N",
1045 ((ret >> (2 * 7)) & 0x7F) ? "Y" : "N",
1046 ((ret >> (3 * 7)) & 0x7F) ? "Y" : "N"))
1047 DBG_LOG(("+-----------------------+"))
1048
1049 DBG_LOG(("DSP's(present-absent):%08x-%08x", ret,
1050 ~ret & 0x3fffffff))
1051
1052 return (ret);
1053 }
Linux with added FPC-III support