Linux 4.18.10

[linux/fpc-iii.git] / drivers / phy / samsung / phy-exynos5-usbdrd.c

/*
 * Samsung EXYNOS5 SoC series USB DRD PHY driver
 *
 * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series
 *
 * Copyright (C) 2014 Samsung Electronics Co., Ltd.
 * Author: Vivek Gautam <gautam.vivek@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>

/* Exynos USB PHY registers */
#define EXYNOS5_FSEL_9MHZ6              0x0
#define EXYNOS5_FSEL_10MHZ              0x1
#define EXYNOS5_FSEL_12MHZ              0x2
#define EXYNOS5_FSEL_19MHZ2             0x3
#define EXYNOS5_FSEL_20MHZ              0x4
#define EXYNOS5_FSEL_24MHZ              0x5
#define EXYNOS5_FSEL_50MHZ              0x7

/* EXYNOS5: USB 3.0 DRD PHY registers */
#define EXYNOS5_DRD_LINKSYSTEM                  0x04

#define LINKSYSTEM_FLADJ_MASK                   (0x3f << 1)
#define LINKSYSTEM_FLADJ(_x)                    ((_x) << 1)
#define LINKSYSTEM_XHCI_VERSION_CONTROL         BIT(27)

#define EXYNOS5_DRD_PHYUTMI                     0x08

#define PHYUTMI_OTGDISABLE                      BIT(6)
#define PHYUTMI_FORCESUSPEND                    BIT(1)
#define PHYUTMI_FORCESLEEP                      BIT(0)

#define EXYNOS5_DRD_PHYPIPE                     0x0c

#define EXYNOS5_DRD_PHYCLKRST                   0x10

#define PHYCLKRST_EN_UTMISUSPEND                BIT(31)

#define PHYCLKRST_SSC_REFCLKSEL_MASK            (0xff << 23)
#define PHYCLKRST_SSC_REFCLKSEL(_x)             ((_x) << 23)

#define PHYCLKRST_SSC_RANGE_MASK                (0x03 << 21)
#define PHYCLKRST_SSC_RANGE(_x)                 ((_x) << 21)

#define PHYCLKRST_SSC_EN                        BIT(20)
#define PHYCLKRST_REF_SSP_EN                    BIT(19)
#define PHYCLKRST_REF_CLKDIV2                   BIT(18)

#define PHYCLKRST_MPLL_MULTIPLIER_MASK          (0x7f << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF    (0x19 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF       (0x32 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF     (0x68 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF     (0x7d << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF  (0x02 << 11)

#define PHYCLKRST_FSEL_UTMI_MASK                (0x7 << 5)
#define PHYCLKRST_FSEL_PIPE_MASK                (0x7 << 8)
#define PHYCLKRST_FSEL(_x)                      ((_x) << 5)
#define PHYCLKRST_FSEL_PAD_100MHZ               (0x27 << 5)
#define PHYCLKRST_FSEL_PAD_24MHZ                (0x2a << 5)
#define PHYCLKRST_FSEL_PAD_20MHZ                (0x31 << 5)
#define PHYCLKRST_FSEL_PAD_19_2MHZ              (0x38 << 5)

#define PHYCLKRST_RETENABLEN                    BIT(4)

#define PHYCLKRST_REFCLKSEL_MASK                (0x03 << 2)
#define PHYCLKRST_REFCLKSEL_PAD_REFCLK          (0x2 << 2)
#define PHYCLKRST_REFCLKSEL_EXT_REFCLK          (0x3 << 2)

#define PHYCLKRST_PORTRESET                     BIT(1)
#define PHYCLKRST_COMMONONN                     BIT(0)

#define EXYNOS5_DRD_PHYREG0                     0x14
#define PHYREG0_SSC_REF_CLK_SEL                 BIT(21)
#define PHYREG0_SSC_RANGE                       BIT(20)
#define PHYREG0_CR_WRITE                        BIT(19)
#define PHYREG0_CR_READ                         BIT(18)
#define PHYREG0_CR_DATA_IN(_x)                  ((_x) << 2)
#define PHYREG0_CR_CAP_DATA                     BIT(1)
#define PHYREG0_CR_CAP_ADDR                     BIT(0)

#define EXYNOS5_DRD_PHYREG1                     0x18
#define PHYREG1_CR_DATA_OUT(_x)                 ((_x) << 1)
#define PHYREG1_CR_ACK                          BIT(0)

#define EXYNOS5_DRD_PHYPARAM0                   0x1c

#define PHYPARAM0_REF_USE_PAD                   BIT(31)
#define PHYPARAM0_REF_LOSLEVEL_MASK             (0x1f << 26)
#define PHYPARAM0_REF_LOSLEVEL                  (0x9 << 26)

#define EXYNOS5_DRD_PHYPARAM1                   0x20

#define PHYPARAM1_PCS_TXDEEMPH_MASK             (0x1f << 0)
#define PHYPARAM1_PCS_TXDEEMPH                  (0x1c)

#define EXYNOS5_DRD_PHYTERM                     0x24

#define EXYNOS5_DRD_PHYTEST                     0x28

#define PHYTEST_POWERDOWN_SSP                   BIT(3)
#define PHYTEST_POWERDOWN_HSP                   BIT(2)

#define EXYNOS5_DRD_PHYADP                      0x2c

#define EXYNOS5_DRD_PHYUTMICLKSEL               0x30

#define PHYUTMICLKSEL_UTMI_CLKSEL               BIT(2)

#define EXYNOS5_DRD_PHYRESUME                   0x34
#define EXYNOS5_DRD_LINKPORT                    0x44

/* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */
#define EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN              (0x15)
#define LOSLEVEL_OVRD_IN_LOS_BIAS_5420                  (0x5 << 13)
#define LOSLEVEL_OVRD_IN_LOS_BIAS_DEFAULT               (0x0 << 13)
#define LOSLEVEL_OVRD_IN_EN                             (0x1 << 10)
#define LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT              (0x9 << 0)

#define EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN        (0x12)
#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420              (0x5 << 13)
#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_DEFAULT           (0x4 << 13)

#define EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG                (0x1010)
#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M         (0x4 << 4)
#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M              (0x8 << 4)
#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_25M_26M          (0x8 << 4)
#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M      (0x20 << 4)
#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5             (0x20 << 4)
#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M         (0x40 << 4)

#define KHZ     1000
#define MHZ     (KHZ * KHZ)

enum exynos5_usbdrd_phy_id {
        EXYNOS5_DRDPHY_UTMI,
        EXYNOS5_DRDPHY_PIPE3,
        EXYNOS5_DRDPHYS_NUM,
};

struct phy_usb_instance;
struct exynos5_usbdrd_phy;

struct exynos5_usbdrd_phy_config {
        u32 id;
        void (*phy_isol)(struct phy_usb_instance *inst, u32 on);
        void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd);
        unsigned int (*set_refclk)(struct phy_usb_instance *inst);
};

struct exynos5_usbdrd_phy_drvdata {
        const struct exynos5_usbdrd_phy_config *phy_cfg;
        u32 pmu_offset_usbdrd0_phy;
        u32 pmu_offset_usbdrd1_phy;
        bool has_common_clk_gate;
};

/**
 * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY
 * @dev: pointer to device instance of this platform device
 * @reg_phy: usb phy controller register memory base
 * @clk: phy clock for register access
 * @pipeclk: clock for pipe3 phy
 * @utmiclk: clock for utmi+ phy
 * @itpclk: clock for ITP generation
 * @drv_data: pointer to SoC level driver data structure
 * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
 *          instances each with its 'phy' and 'phy_cfg'.
 * @extrefclk: frequency select settings when using 'separate
 *             reference clocks' for SS and HS operations
 * @ref_clk: reference clock to PHY block from which PHY's
 *           operational clocks are derived
 * vbus: VBUS regulator for phy
 * vbus_boost: Boost regulator for VBUS present on few Exynos boards
 */
struct exynos5_usbdrd_phy {
        struct device *dev;
        void __iomem *reg_phy;
        struct clk *clk;
        struct clk *pipeclk;
        struct clk *utmiclk;
        struct clk *itpclk;
        const struct exynos5_usbdrd_phy_drvdata *drv_data;
        struct phy_usb_instance {
                struct phy *phy;
                u32 index;
                struct regmap *reg_pmu;
                u32 pmu_offset;
                const struct exynos5_usbdrd_phy_config *phy_cfg;
        } phys[EXYNOS5_DRDPHYS_NUM];
        u32 extrefclk;
        struct clk *ref_clk;
        struct regulator *vbus;
        struct regulator *vbus_boost;
};

static inline
struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst)
{
        return container_of((inst), struct exynos5_usbdrd_phy,
                            phys[(inst)->index]);
}

/*
 * exynos5_rate_to_clk() converts the supplied clock rate to the value that
 * can be written to the phy register.
 */
static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg)
{
        /* EXYNOS5_FSEL_MASK */

        switch (rate) {
        case 9600 * KHZ:
                *reg = EXYNOS5_FSEL_9MHZ6;
                break;
        case 10 * MHZ:
                *reg = EXYNOS5_FSEL_10MHZ;
                break;
        case 12 * MHZ:
                *reg = EXYNOS5_FSEL_12MHZ;
                break;
        case 19200 * KHZ:
                *reg = EXYNOS5_FSEL_19MHZ2;
                break;
        case 20 * MHZ:
                *reg = EXYNOS5_FSEL_20MHZ;
                break;
        case 24 * MHZ:
                *reg = EXYNOS5_FSEL_24MHZ;
                break;
        case 50 * MHZ:
                *reg = EXYNOS5_FSEL_50MHZ;
                break;
        default:
                return -EINVAL;
        }

        return 0;
}

static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
                                                unsigned int on)
{
        unsigned int val;

        if (!inst->reg_pmu)
                return;

        val = on ? 0 : EXYNOS4_PHY_ENABLE;

        regmap_update_bits(inst->reg_pmu, inst->pmu_offset,
                           EXYNOS4_PHY_ENABLE, val);
}

/*
 * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock
 * from clock core. Further sets multiplier values and spread spectrum
 * clock settings for SuperSpeed operations.
 */
static unsigned int
exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
{
        u32 reg;
        struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

        /* restore any previous reference clock settings */
        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);

        /* Use EXTREFCLK as ref clock */
        reg &= ~PHYCLKRST_REFCLKSEL_MASK;
        reg |=  PHYCLKRST_REFCLKSEL_EXT_REFCLK;

        /* FSEL settings corresponding to reference clock */
        reg &= ~PHYCLKRST_FSEL_PIPE_MASK |
                PHYCLKRST_MPLL_MULTIPLIER_MASK |
                PHYCLKRST_SSC_REFCLKSEL_MASK;
        switch (phy_drd->extrefclk) {
        case EXYNOS5_FSEL_50MHZ:
                reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
                        PHYCLKRST_SSC_REFCLKSEL(0x00));
                break;
        case EXYNOS5_FSEL_24MHZ:
                reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
                        PHYCLKRST_SSC_REFCLKSEL(0x88));
                break;
        case EXYNOS5_FSEL_20MHZ:
                reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
                        PHYCLKRST_SSC_REFCLKSEL(0x00));
                break;
        case EXYNOS5_FSEL_19MHZ2:
                reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
                        PHYCLKRST_SSC_REFCLKSEL(0x88));
                break;
        default:
                dev_dbg(phy_drd->dev, "unsupported ref clk\n");
                break;
        }

        return reg;
}

/*
 * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock
 * from clock core. Further sets the FSEL values for HighSpeed operations.
 */
static unsigned int
exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
{
        u32 reg;
        struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

        /* restore any previous reference clock settings */
        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);

        reg &= ~PHYCLKRST_REFCLKSEL_MASK;
        reg |=  PHYCLKRST_REFCLKSEL_EXT_REFCLK;

        reg &= ~PHYCLKRST_FSEL_UTMI_MASK |
                PHYCLKRST_MPLL_MULTIPLIER_MASK |
                PHYCLKRST_SSC_REFCLKSEL_MASK;
        reg |= PHYCLKRST_FSEL(phy_drd->extrefclk);

        return reg;
}

static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd)
{
        u32 reg;

        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
        /* Set Tx De-Emphasis level */
        reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
        reg |=  PHYPARAM1_PCS_TXDEEMPH;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);

        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
        reg &= ~PHYTEST_POWERDOWN_SSP;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
}

static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
{
        u32 reg;

        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
        /* Set Loss-of-Signal Detector sensitivity */
        reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
        reg |=  PHYPARAM0_REF_LOSLEVEL;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);

        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
        /* Set Tx De-Emphasis level */
        reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
        reg |=  PHYPARAM1_PCS_TXDEEMPH;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);

        /* UTMI Power Control */
        writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI);

        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
        reg &= ~PHYTEST_POWERDOWN_HSP;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
}

static int exynos5_usbdrd_phy_init(struct phy *phy)
{
        int ret;
        u32 reg;
        struct phy_usb_instance *inst = phy_get_drvdata(phy);
        struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

        ret = clk_prepare_enable(phy_drd->clk);
        if (ret)
                return ret;

        /* Reset USB 3.0 PHY */
        writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
        writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME);

        /*
         * Setting the Frame length Adj value[6:1] to default 0x20
         * See xHCI 1.0 spec, 5.2.4
         */
        reg =   LINKSYSTEM_XHCI_VERSION_CONTROL |
                LINKSYSTEM_FLADJ(0x20);
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM);

        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
        /* Select PHY CLK source */
        reg &= ~PHYPARAM0_REF_USE_PAD;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);

        /* This bit must be set for both HS and SS operations */
        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL);
        reg |= PHYUTMICLKSEL_UTMI_CLKSEL;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL);

        /* UTMI or PIPE3 specific init */
        inst->phy_cfg->phy_init(phy_drd);

        /* reference clock settings */
        reg = inst->phy_cfg->set_refclk(inst);

                /* Digital power supply in normal operating mode */
        reg |=  PHYCLKRST_RETENABLEN |
                /* Enable ref clock for SS function */
                PHYCLKRST_REF_SSP_EN |
                /* Enable spread spectrum */
                PHYCLKRST_SSC_EN |
                /* Power down HS Bias and PLL blocks in suspend mode */
                PHYCLKRST_COMMONONN |
                /* Reset the port */
                PHYCLKRST_PORTRESET;

        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);

        udelay(10);

        reg &= ~PHYCLKRST_PORTRESET;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);

        clk_disable_unprepare(phy_drd->clk);

        return 0;
}

static int exynos5_usbdrd_phy_exit(struct phy *phy)
{
        int ret;
        u32 reg;
        struct phy_usb_instance *inst = phy_get_drvdata(phy);
        struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

        ret = clk_prepare_enable(phy_drd->clk);
        if (ret)
                return ret;

        reg =   PHYUTMI_OTGDISABLE |
                PHYUTMI_FORCESUSPEND |
                PHYUTMI_FORCESLEEP;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI);

        /* Resetting the PHYCLKRST enable bits to reduce leakage current */
        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
        reg &= ~(PHYCLKRST_REF_SSP_EN |
                 PHYCLKRST_SSC_EN |
                 PHYCLKRST_COMMONONN);
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);

        /* Control PHYTEST to remove leakage current */
        reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
        reg |=  PHYTEST_POWERDOWN_SSP |
                PHYTEST_POWERDOWN_HSP;
        writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);

        clk_disable_unprepare(phy_drd->clk);

        return 0;
}

static int exynos5_usbdrd_phy_power_on(struct phy *phy)
{
        int ret;
        struct phy_usb_instance *inst = phy_get_drvdata(phy);
        struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

        dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n");

        clk_prepare_enable(phy_drd->ref_clk);
        if (!phy_drd->drv_data->has_common_clk_gate) {
                clk_prepare_enable(phy_drd->pipeclk);
                clk_prepare_enable(phy_drd->utmiclk);
                clk_prepare_enable(phy_drd->itpclk);
        }

        /* Enable VBUS supply */
        if (phy_drd->vbus_boost) {
                ret = regulator_enable(phy_drd->vbus_boost);
                if (ret) {
                        dev_err(phy_drd->dev,
                                "Failed to enable VBUS boost supply\n");
                        goto fail_vbus;
                }
        }

        if (phy_drd->vbus) {
                ret = regulator_enable(phy_drd->vbus);
                if (ret) {
                        dev_err(phy_drd->dev, "Failed to enable VBUS supply\n");
                        goto fail_vbus_boost;
                }
        }

        /* Power-on PHY*/
        inst->phy_cfg->phy_isol(inst, 0);

        return 0;

fail_vbus_boost:
        if (phy_drd->vbus_boost)
                regulator_disable(phy_drd->vbus_boost);

fail_vbus:
        clk_disable_unprepare(phy_drd->ref_clk);
        if (!phy_drd->drv_data->has_common_clk_gate) {
                clk_disable_unprepare(phy_drd->itpclk);
                clk_disable_unprepare(phy_drd->utmiclk);
                clk_disable_unprepare(phy_drd->pipeclk);
        }

        return ret;
}

static int exynos5_usbdrd_phy_power_off(struct phy *phy)
{
        struct phy_usb_instance *inst = phy_get_drvdata(phy);
        struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

        dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n");

        /* Power-off the PHY */
        inst->phy_cfg->phy_isol(inst, 1);

        /* Disable VBUS supply */
        if (phy_drd->vbus)
                regulator_disable(phy_drd->vbus);
        if (phy_drd->vbus_boost)
                regulator_disable(phy_drd->vbus_boost);

        clk_disable_unprepare(phy_drd->ref_clk);
        if (!phy_drd->drv_data->has_common_clk_gate) {
                clk_disable_unprepare(phy_drd->itpclk);
                clk_disable_unprepare(phy_drd->pipeclk);
                clk_disable_unprepare(phy_drd->utmiclk);
        }

        return 0;
}

static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd,
                            u32 val, u32 cmd)
{
        u32 usec = 100;
        unsigned int result;

        writel(val | cmd, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);

        do {
                result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1);
                if (result & PHYREG1_CR_ACK)
                        break;

                udelay(1);
        } while (usec-- > 0);

        if (!usec) {
                dev_err(phy_drd->dev,
                        "CRPORT handshake timeout1 (0x%08x)\n", val);
                return -ETIME;
        }

        usec = 100;

        writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);

        do {
                result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1);
                if (!(result & PHYREG1_CR_ACK))
                        break;

                udelay(1);
        } while (usec-- > 0);

        if (!usec) {
                dev_err(phy_drd->dev,
                        "CRPORT handshake timeout2 (0x%08x)\n", val);
                return -ETIME;
        }

        return 0;
}

static int crport_ctrl_write(struct exynos5_usbdrd_phy *phy_drd,
                             u32 addr, u32 data)
{
        int ret;

        /* Write Address */
        writel(PHYREG0_CR_DATA_IN(addr),
               phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
        ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(addr),
                               PHYREG0_CR_CAP_ADDR);
        if (ret)
                return ret;

        /* Write Data */
        writel(PHYREG0_CR_DATA_IN(data),
               phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
        ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data),
                               PHYREG0_CR_CAP_DATA);
        if (ret)
                return ret;

        ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data),
                               PHYREG0_CR_WRITE);

        return ret;
}

/*
 * Calibrate few PHY parameters using CR_PORT register to meet
 * SuperSpeed requirements on Exynos5420 and Exynos5800 systems,
 * which have 28nm USB 3.0 DRD PHY.
 */
static int exynos5420_usbdrd_phy_calibrate(struct exynos5_usbdrd_phy *phy_drd)
{
        unsigned int temp;
        int ret = 0;

        /*
         * Change los_bias to (0x5) for 28nm PHY from a
         * default value (0x0); los_level is set as default
         * (0x9) as also reflected in los_level[30:26] bits
         * of PHYPARAM0 register.
         */
        temp = LOSLEVEL_OVRD_IN_LOS_BIAS_5420 |
                LOSLEVEL_OVRD_IN_EN |
                LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT;
        ret = crport_ctrl_write(phy_drd,
                                EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN,
                                temp);
        if (ret) {
                dev_err(phy_drd->dev,
                        "Failed setting Loss-of-Signal level for SuperSpeed\n");
                return ret;
        }

        /*
         * Set tx_vboost_lvl to (0x5) for 28nm PHY Tuning,
         * to raise Tx signal level from its default value of (0x4)
         */
        temp = TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420;
        ret = crport_ctrl_write(phy_drd,
                                EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN,
                                temp);
        if (ret) {
                dev_err(phy_drd->dev,
                        "Failed setting Tx-Vboost-Level for SuperSpeed\n");
                return ret;
        }

        /*
         * Set proper time to wait for RxDetect measurement, for
         * desired reference clock of PHY, by tuning the CR_PORT
         * register LANE0.TX_DEBUG which is internal to PHY.
         * This fixes issue with few USB 3.0 devices, which are
         * not detected (not even generate interrupts on the bus
         * on insertion) without this change.
         * e.g. Samsung SUM-TSB16S 3.0 USB drive.
         */
        switch (phy_drd->extrefclk) {
        case EXYNOS5_FSEL_50MHZ:
                temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M;
                break;
        case EXYNOS5_FSEL_20MHZ:
        case EXYNOS5_FSEL_19MHZ2:
                temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M;
                break;
        case EXYNOS5_FSEL_24MHZ:
        default:
                temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M;
                break;
        }

        ret = crport_ctrl_write(phy_drd,
                                EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG,
                                temp);
        if (ret)
                dev_err(phy_drd->dev,
                        "Fail to set RxDet measurement time for SuperSpeed\n");

        return ret;
}

static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev,
                                        struct of_phandle_args *args)
{
        struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev);

        if (WARN_ON(args->args[0] >= EXYNOS5_DRDPHYS_NUM))
                return ERR_PTR(-ENODEV);

        return phy_drd->phys[args->args[0]].phy;
}

static int exynos5_usbdrd_phy_calibrate(struct phy *phy)
{
        struct phy_usb_instance *inst = phy_get_drvdata(phy);
        struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);

        return exynos5420_usbdrd_phy_calibrate(phy_drd);
}

static const struct phy_ops exynos5_usbdrd_phy_ops = {
        .init           = exynos5_usbdrd_phy_init,
        .exit           = exynos5_usbdrd_phy_exit,
        .power_on       = exynos5_usbdrd_phy_power_on,
        .power_off      = exynos5_usbdrd_phy_power_off,
        .calibrate      = exynos5_usbdrd_phy_calibrate,
        .owner          = THIS_MODULE,
};

static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd)
{
        unsigned long ref_rate;
        int ret;

        phy_drd->clk = devm_clk_get(phy_drd->dev, "phy");
        if (IS_ERR(phy_drd->clk)) {
                dev_err(phy_drd->dev, "Failed to get phy clock\n");
                return PTR_ERR(phy_drd->clk);
        }

        phy_drd->ref_clk = devm_clk_get(phy_drd->dev, "ref");
        if (IS_ERR(phy_drd->ref_clk)) {
                dev_err(phy_drd->dev, "Failed to get phy reference clock\n");
                return PTR_ERR(phy_drd->ref_clk);
        }
        ref_rate = clk_get_rate(phy_drd->ref_clk);

        ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk);
        if (ret) {
                dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n",
                        ref_rate);
                return ret;
        }

        if (!phy_drd->drv_data->has_common_clk_gate) {
                phy_drd->pipeclk = devm_clk_get(phy_drd->dev, "phy_pipe");
                if (IS_ERR(phy_drd->pipeclk)) {
                        dev_info(phy_drd->dev,
                                 "PIPE3 phy operational clock not specified\n");
                        phy_drd->pipeclk = NULL;
                }

                phy_drd->utmiclk = devm_clk_get(phy_drd->dev, "phy_utmi");
                if (IS_ERR(phy_drd->utmiclk)) {
                        dev_info(phy_drd->dev,
                                 "UTMI phy operational clock not specified\n");
                        phy_drd->utmiclk = NULL;
                }

                phy_drd->itpclk = devm_clk_get(phy_drd->dev, "itp");
                if (IS_ERR(phy_drd->itpclk)) {
                        dev_info(phy_drd->dev,
                                 "ITP clock from main OSC not specified\n");
                        phy_drd->itpclk = NULL;
                }
        }

        return 0;
}

static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = {
        {
                .id             = EXYNOS5_DRDPHY_UTMI,
                .phy_isol       = exynos5_usbdrd_phy_isol,
                .phy_init       = exynos5_usbdrd_utmi_init,
                .set_refclk     = exynos5_usbdrd_utmi_set_refclk,
        },
        {
                .id             = EXYNOS5_DRDPHY_PIPE3,
                .phy_isol       = exynos5_usbdrd_phy_isol,
                .phy_init       = exynos5_usbdrd_pipe3_init,
                .set_refclk     = exynos5_usbdrd_pipe3_set_refclk,
        },
};

static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = {
        .phy_cfg                = phy_cfg_exynos5,
        .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
        .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL,
        .has_common_clk_gate    = true,
};

static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = {
        .phy_cfg                = phy_cfg_exynos5,
        .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
        .has_common_clk_gate    = true,
};

static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = {
        .phy_cfg                = phy_cfg_exynos5,
        .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
        .pmu_offset_usbdrd1_phy = EXYNOS5433_USBHOST30_PHY_CONTROL,
        .has_common_clk_gate    = false,
};

static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = {
        .phy_cfg                = phy_cfg_exynos5,
        .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
        .has_common_clk_gate    = false,
};

static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
        {
                .compatible = "samsung,exynos5250-usbdrd-phy",
                .data = &exynos5250_usbdrd_phy
        }, {
                .compatible = "samsung,exynos5420-usbdrd-phy",
                .data = &exynos5420_usbdrd_phy
        }, {
                .compatible = "samsung,exynos5433-usbdrd-phy",
                .data = &exynos5433_usbdrd_phy
        }, {
                .compatible = "samsung,exynos7-usbdrd-phy",
                .data = &exynos7_usbdrd_phy
        },
        { },
};
MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match);

static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct device_node *node = dev->of_node;
        struct exynos5_usbdrd_phy *phy_drd;
        struct phy_provider *phy_provider;
        struct resource *res;
        const struct exynos5_usbdrd_phy_drvdata *drv_data;
        struct regmap *reg_pmu;
        u32 pmu_offset;
        int i, ret;
        int channel;

        phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL);
        if (!phy_drd)
                return -ENOMEM;

        dev_set_drvdata(dev, phy_drd);
        phy_drd->dev = dev;

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        phy_drd->reg_phy = devm_ioremap_resource(dev, res);
        if (IS_ERR(phy_drd->reg_phy))
                return PTR_ERR(phy_drd->reg_phy);

        drv_data = of_device_get_match_data(dev);
        if (!drv_data)
                return -EINVAL;

        phy_drd->drv_data = drv_data;

        ret = exynos5_usbdrd_phy_clk_handle(phy_drd);
        if (ret) {
                dev_err(dev, "Failed to initialize clocks\n");
                return ret;
        }

        reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
                                                   "samsung,pmu-syscon");
        if (IS_ERR(reg_pmu)) {
                dev_err(dev, "Failed to lookup PMU regmap\n");
                return PTR_ERR(reg_pmu);
        }

        /*
         * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with
         * each having separate power control registers.
         * 'channel' facilitates to set such registers.
         */
        channel = of_alias_get_id(node, "usbdrdphy");
        if (channel < 0)
                dev_dbg(dev, "Not a multi-controller usbdrd phy\n");

        switch (channel) {
        case 1:
                pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy;
                break;
        case 0:
        default:
                pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy;
                break;
        }

        /* Get Vbus regulators */
        phy_drd->vbus = devm_regulator_get(dev, "vbus");
        if (IS_ERR(phy_drd->vbus)) {
                ret = PTR_ERR(phy_drd->vbus);
                if (ret == -EPROBE_DEFER)
                        return ret;

                dev_warn(dev, "Failed to get VBUS supply regulator\n");
                phy_drd->vbus = NULL;
        }

        phy_drd->vbus_boost = devm_regulator_get(dev, "vbus-boost");
        if (IS_ERR(phy_drd->vbus_boost)) {
                ret = PTR_ERR(phy_drd->vbus_boost);
                if (ret == -EPROBE_DEFER)
                        return ret;

                dev_warn(dev, "Failed to get VBUS boost supply regulator\n");
                phy_drd->vbus_boost = NULL;
        }

        dev_vdbg(dev, "Creating usbdrd_phy phy\n");

        for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) {
                struct phy *phy = devm_phy_create(dev, NULL,
                                                  &exynos5_usbdrd_phy_ops);
                if (IS_ERR(phy)) {
                        dev_err(dev, "Failed to create usbdrd_phy phy\n");
                        return PTR_ERR(phy);
                }

                phy_drd->phys[i].phy = phy;
                phy_drd->phys[i].index = i;
                phy_drd->phys[i].reg_pmu = reg_pmu;
                phy_drd->phys[i].pmu_offset = pmu_offset;
                phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i];
                phy_set_drvdata(phy, &phy_drd->phys[i]);
        }

        phy_provider = devm_of_phy_provider_register(dev,
                                                     exynos5_usbdrd_phy_xlate);
        if (IS_ERR(phy_provider)) {
                dev_err(phy_drd->dev, "Failed to register phy provider\n");
                return PTR_ERR(phy_provider);
        }

        return 0;
}

static struct platform_driver exynos5_usb3drd_phy = {
        .probe  = exynos5_usbdrd_phy_probe,
        .driver = {
                .of_match_table = exynos5_usbdrd_phy_of_match,
                .name           = "exynos5_usb3drd_phy",
        }
};

module_platform_driver(exynos5_usb3drd_phy);
MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver");
MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:exynos5_usb3drd_phy");