?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.18.10
[linux/fpc-iii.git] / drivers / scsi / mpt3sas / mpi / mpi2_cnfg.h
blob5122920a961aa0a7ad602ecd8feff1acf378abda
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * Copyright 2000-2015 Avago Technologies. All rights reserved.
4 *
5 *
6 * Name: mpi2_cnfg.h
7 * Title: MPI Configuration messages and pages
8 * Creation Date: November 10, 2006
9 *
10 * mpi2_cnfg.h Version: 02.00.42
11 *
12 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
13 * prefix are for use only on MPI v2.5 products, and must not be used
14 * with MPI v2.0 products. Unless otherwise noted, names beginning with
15 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
16 *
17 * Version History
18 * ---------------
19 *
20 * Date Version Description
21 * -------- -------- ------------------------------------------------------
22 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
23 * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
24 * Added Manufacturing Page 11.
25 * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
26 * define.
27 * 06-26-07 02.00.02 Adding generic structure for product-specific
28 * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
29 * Rework of BIOS Page 2 configuration page.
30 * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
31 * forms.
32 * Added configuration pages IOC Page 8 and Driver
33 * Persistent Mapping Page 0.
34 * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
35 * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
36 * RAID Physical Disk Pages 0 and 1, RAID Configuration
37 * Page 0).
38 * Added new value for AccessStatus field of SAS Device
39 * Page 0 (_SATA_NEEDS_INITIALIZATION).
40 * 10-31-07 02.00.04 Added missing SEPDevHandle field to
41 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
42 * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
43 * NVDATA.
44 * Modified IOC Page 7 to use masks and added field for
45 * SASBroadcastPrimitiveMasks.
46 * Added MPI2_CONFIG_PAGE_BIOS_4.
47 * Added MPI2_CONFIG_PAGE_LOG_0.
48 * 02-29-08 02.00.06 Modified various names to make them 32-character unique.
49 * Added SAS Device IDs.
50 * Updated Integrated RAID configuration pages including
51 * Manufacturing Page 4, IOC Page 6, and RAID Configuration
52 * Page 0.
53 * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
54 * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
55 * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
56 * Added missing MaxNumRoutedSasAddresses field to
57 * MPI2_CONFIG_PAGE_EXPANDER_0.
58 * Added SAS Port Page 0.
59 * Modified structure layout for
60 * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
61 * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
62 * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
63 * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
64 * to 0x000000FF.
65 * Added two new values for the Physical Disk Coercion Size
66 * bits in the Flags field of Manufacturing Page 4.
67 * Added product-specific Manufacturing pages 16 to 31.
68 * Modified Flags bits for controlling write cache on SATA
69 * drives in IO Unit Page 1.
70 * Added new bit to AdditionalControlFlags of SAS IO Unit
71 * Page 1 to control Invalid Topology Correction.
72 * Added additional defines for RAID Volume Page 0
73 * VolumeStatusFlags field.
74 * Modified meaning of RAID Volume Page 0 VolumeSettings
75 * define for auto-configure of hot-swap drives.
76 * Added SupportedPhysDisks field to RAID Volume Page 1 and
77 * added related defines.
78 * Added PhysDiskAttributes field (and related defines) to
79 * RAID Physical Disk Page 0.
80 * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
81 * Added three new DiscoveryStatus bits for SAS IO Unit
82 * Page 0 and SAS Expander Page 0.
83 * Removed multiplexing information from SAS IO Unit pages.
84 * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
85 * Removed Zone Address Resolved bit from PhyInfo and from
86 * Expander Page 0 Flags field.
87 * Added two new AccessStatus values to SAS Device Page 0
88 * for indicating routing problems. Added 3 reserved words
89 * to this page.
90 * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
91 * Inserted missing reserved field into structure for IOC
92 * Page 6.
93 * Added more pending task bits to RAID Volume Page 0
94 * VolumeStatusFlags defines.
95 * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
96 * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
97 * and SAS Expander Page 0 to flag a downstream initiator
98 * when in simplified routing mode.
99 * Removed SATA Init Failure defines for DiscoveryStatus
100 * fields of SAS IO Unit Page 0 and SAS Expander Page 0.
101 * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
102 * Added PortGroups, DmaGroup, and ControlGroup fields to
103 * SAS Device Page 0.
104 * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
105 * Unit Page 6.
106 * Added expander reduced functionality data to SAS
107 * Expander Page 0.
108 * Added SAS PHY Page 2 and SAS PHY Page 3.
109 * 07-30-09 02.00.12 Added IO Unit Page 7.
110 * Added new device ids.
111 * Added SAS IO Unit Page 5.
112 * Added partial and slumber power management capable flags
113 * to SAS Device Page 0 Flags field.
114 * Added PhyInfo defines for power condition.
115 * Added Ethernet configuration pages.
116 * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
117 * Added SAS PHY Page 4 structure and defines.
118 * 02-10-10 02.00.14 Modified the comments for the configuration page
119 * structures that contain an array of data. The host
120 * should use the "count" field in the page data (e.g. the
121 * NumPhys field) to determine the number of valid elements
122 * in the array.
123 * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
124 * Added PowerManagementCapabilities to IO Unit Page 7.
125 * Added PortWidthModGroup field to
126 * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
127 * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
128 * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
129 * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
130 * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
131 * define.
132 * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
133 * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
134 * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
135 * defines.
136 * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
137 * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
138 * the Pinout field.
139 * Added BoardTemperature and BoardTemperatureUnits fields
140 * to MPI2_CONFIG_PAGE_IO_UNIT_7.
141 * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
142 * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
143 * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
144 * Added IO Unit Page 8, IO Unit Page 9,
145 * and IO Unit Page 10.
146 * Added SASNotifyPrimitiveMasks field to
147 * MPI2_CONFIG_PAGE_IOC_7.
148 * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
149 * 05-25-11 02.00.20 Cleaned up a few comments.
150 * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities
151 * for PCIe link as obsolete.
152 * Added SpinupFlags field containing a Disable Spin-up bit
153 * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO
154 * Unit Page 4.
155 * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
156 * Added UEFIVersion field to BIOS Page 1 and defined new
157 * BiosOptions bits.
158 * Incorporating additions for MPI v2.5.
159 * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
160 * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
161 * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
162 * obsolete for MPI v2.5 and later.
163 * Added some defines for 12G SAS speeds.
164 * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
165 * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
166 * match the specification.
167 * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
168 * future use.
169 * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
170 * MPI2_CONFIG_PAGE_MAN_7.
171 * Added EnclosureLevel and ConnectorName fields to
172 * MPI2_CONFIG_PAGE_SAS_DEV_0.
173 * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
174 * MPI2_CONFIG_PAGE_SAS_DEV_0.
175 * Added EnclosureLevel field to
176 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
177 * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
178 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
179 * 01-08-14 02.00.28 Added more defines for the BiosOptions field of
180 * MPI2_CONFIG_PAGE_BIOS_1.
181 * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
182 * more defines for the BiosOptions field.
183 * 11-18-14 02.00.30 Updated copyright information.
184 * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
185 * Added AdapterOrderAux fields to BIOS Page 3.
186 * 03-16-15 02.00.31 Updated for MPI v2.6.
187 * Added Flags field to IO Unit Page 7.
188 * Added new SAS Phy Event codes
189 * 05-25-15 02.00.33 Added more defines for the BiosOptions field of
190 * MPI2_CONFIG_PAGE_BIOS_1.
191 * 08-25-15 02.00.34 Bumped Header Version.
192 * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4.
193 * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines.
194 * Added Link field to PCIe Link Pages
195 * Added EnclosureLevel and ConnectorName to PCIe
196 * Device Page 0.
197 * Added define for PCIE IoUnit page 1 max rate shift.
198 * Added comment for reserved ExtPageTypes.
199 * Added SAS 4 22.5 gbs speed support.
200 * Added PCIe 4 16.0 GT/sec speec support.
201 * Removed AHCI support.
202 * Removed SOP support.
203 * Added NegotiatedLinkRate and NegotiatedPortWidth to
204 * PCIe device page 0.
205 * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines
206 * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types.
207 * Changed declaration of ConnectorName in PCIe DevicePage0
208 * to match SAS DevicePage 0.
209 * Added SATADeviceWaitTime to IO Unit Page 11.
210 * Added MPI26_MFGPAGE_DEVID_SAS4008
211 * Added x16 PCIe width to IO Unit Page 7
212 * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1
213 * phy data.
214 * Added InitStatus to PCIe IO Unit Page 1 header.
215 * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines.
216 * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and
217 * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats.
218 * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN.
219 * Added ChassisSlot field to SAS Enclosure Page 0.
220 * Added ChassisSlot Valid bit (bit 5) to the Flags field
221 * in SAS Enclosure Page 0.
222 * 06-13-17 02.00.41 Added MPI26_MFGPAGE_DEVID_SAS3816 and
223 * MPI26_MFGPAGE_DEVID_SAS3916 defines.
224 * Removed MPI26_MFGPAGE_DEVID_SAS4008 define.
225 * Added MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN define.
226 * Renamed PI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS to
227 * PI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN.
228 * Renamed MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS to
229 * MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK.
230 * 09-29-17 02.00.42 Added ControllerResetTO field to PCIe Device Page 2.
231 * Added NOIOB field to PCIe Device Page 2.
232 * Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to
233 * the Capabilities field of PCIe Device Page 2.
234 * --------------------------------------------------------------------------
235 */
236
237 #ifndef MPI2_CNFG_H
238 #define MPI2_CNFG_H
239
240 /*****************************************************************************
241 * Configuration Page Header and defines
242 *****************************************************************************/
243
244 /*Config Page Header */
245 typedef struct _MPI2_CONFIG_PAGE_HEADER {
246 U8 PageVersion; /*0x00 */
247 U8 PageLength; /*0x01 */
248 U8 PageNumber; /*0x02 */
249 U8 PageType; /*0x03 */
250 } MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER,
251 Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t;
252
253 typedef union _MPI2_CONFIG_PAGE_HEADER_UNION {
254 MPI2_CONFIG_PAGE_HEADER Struct;
255 U8 Bytes[4];
256 U16 Word16[2];
257 U32 Word32;
258 } MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
259 Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion;
260
261 /*Extended Config Page Header */
262 typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER {
263 U8 PageVersion; /*0x00 */
264 U8 Reserved1; /*0x01 */
265 U8 PageNumber; /*0x02 */
266 U8 PageType; /*0x03 */
267 U16 ExtPageLength; /*0x04 */
268 U8 ExtPageType; /*0x06 */
269 U8 Reserved2; /*0x07 */
270 } MPI2_CONFIG_EXTENDED_PAGE_HEADER,
271 *PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
272 Mpi2ConfigExtendedPageHeader_t,
273 *pMpi2ConfigExtendedPageHeader_t;
274
275 typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
276 MPI2_CONFIG_PAGE_HEADER Struct;
277 MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
278 U8 Bytes[8];
279 U16 Word16[4];
280 U32 Word32[2];
281 } MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
282 *PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
283 Mpi2ConfigPageExtendedHeaderUnion,
284 *pMpi2ConfigPageExtendedHeaderUnion;
285
286
287 /*PageType field values */
288 #define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00)
289 #define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10)
290 #define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20)
291 #define MPI2_CONFIG_PAGEATTR_MASK (0xF0)
292
293 #define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00)
294 #define MPI2_CONFIG_PAGETYPE_IOC (0x01)
295 #define MPI2_CONFIG_PAGETYPE_BIOS (0x02)
296 #define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
297 #define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09)
298 #define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
299 #define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F)
300 #define MPI2_CONFIG_PAGETYPE_MASK (0x0F)
301
302 #define MPI2_CONFIG_TYPENUM_MASK (0x0FFF)
303
304
305 /*ExtPageType field values */
306 #define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
307 #define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
308 #define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
309 #define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
310 #define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14)
311 #define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15)
312 #define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
313 #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
314 #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
315 #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
316 #define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
317 #define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT (0x1B)
318 #define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH (0x1C)
319 #define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE (0x1D)
320 #define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK (0x1E)
321
322
323 /*****************************************************************************
324 * PageAddress defines
325 *****************************************************************************/
326
327 /*RAID Volume PageAddress format */
328 #define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000)
329 #define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
330 #define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000)
331
332 #define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF)
333
334
335 /*RAID Physical Disk PageAddress format */
336 #define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000)
337 #define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000)
338 #define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000)
339 #define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000)
340
341 #define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
342 #define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF)
343
344
345 /*SAS Expander PageAddress format */
346 #define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000)
347 #define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
348 #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000)
349 #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000)
350
351 #define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF)
352 #define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000)
353 #define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
354
355
356 /*SAS Device PageAddress format */
357 #define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
358 #define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
359 #define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000)
360
361 #define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
362
363
364 /*SAS PHY PageAddress format */
365 #define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000)
366 #define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
367 #define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000)
368
369 #define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF)
370 #define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF)
371
372
373 /*SAS Port PageAddress format */
374 #define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000)
375 #define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
376 #define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
377
378 #define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF)
379
380
381 /*SAS Enclosure PageAddress format */
382 #define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000)
383 #define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
384 #define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
385
386 #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
387
388 /*Enclosure PageAddress format */
389 #define MPI26_ENCLOS_PGAD_FORM_MASK (0xF0000000)
390 #define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
391 #define MPI26_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
392
393 #define MPI26_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
394
395 /*RAID Configuration PageAddress format */
396 #define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
397 #define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000)
398 #define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000)
399 #define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000)
400
401 #define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF)
402
403
404 /*Driver Persistent Mapping PageAddress format */
405 #define MPI2_DPM_PGAD_FORM_MASK (0xF0000000)
406 #define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000)
407
408 #define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000)
409 #define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16)
410 #define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
411
412
413 /*Ethernet PageAddress format */
414 #define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
415 #define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
416
417 #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
418
419
420 /*PCIe Switch PageAddress format */
421 #define MPI26_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000)
422 #define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
423 #define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM (0x10000000)
424 #define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL (0x20000000)
425
426 #define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF)
427 #define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000)
428 #define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16)
429
430
431 /*PCIe Device PageAddress format */
432 #define MPI26_PCIE_DEVICE_PGAD_FORM_MASK (0xF0000000)
433 #define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
434 #define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE (0x20000000)
435
436 #define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
437
438 /*PCIe Link PageAddress format */
439 #define MPI26_PCIE_LINK_PGAD_FORM_MASK (0xF0000000)
440 #define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000)
441 #define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000)
442
443 #define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK (0x000000FF)
444
445
446
447 /****************************************************************************
448 * Configuration messages
449 ****************************************************************************/
450
451 /*Configuration Request Message */
452 typedef struct _MPI2_CONFIG_REQUEST {
453 U8 Action; /*0x00 */
454 U8 SGLFlags; /*0x01 */
455 U8 ChainOffset; /*0x02 */
456 U8 Function; /*0x03 */
457 U16 ExtPageLength; /*0x04 */
458 U8 ExtPageType; /*0x06 */
459 U8 MsgFlags; /*0x07 */
460 U8 VP_ID; /*0x08 */
461 U8 VF_ID; /*0x09 */
462 U16 Reserved1; /*0x0A */
463 U8 Reserved2; /*0x0C */
464 U8 ProxyVF_ID; /*0x0D */
465 U16 Reserved4; /*0x0E */
466 U32 Reserved3; /*0x10 */
467 MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
468 U32 PageAddress; /*0x18 */
469 MPI2_SGE_IO_UNION PageBufferSGE; /*0x1C */
470 } MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST,
471 Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t;
472
473 /*values for the Action field */
474 #define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00)
475 #define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
476 #define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
477 #define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03)
478 #define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
479 #define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
480 #define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
481 #define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07)
482
483 /*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
484
485
486 /*Config Reply Message */
487 typedef struct _MPI2_CONFIG_REPLY {
488 U8 Action; /*0x00 */
489 U8 SGLFlags; /*0x01 */
490 U8 MsgLength; /*0x02 */
491 U8 Function; /*0x03 */
492 U16 ExtPageLength; /*0x04 */
493 U8 ExtPageType; /*0x06 */
494 U8 MsgFlags; /*0x07 */
495 U8 VP_ID; /*0x08 */
496 U8 VF_ID; /*0x09 */
497 U16 Reserved1; /*0x0A */
498 U16 Reserved2; /*0x0C */
499 U16 IOCStatus; /*0x0E */
500 U32 IOCLogInfo; /*0x10 */
501 MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
502 } MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY,
503 Mpi2ConfigReply_t, *pMpi2ConfigReply_t;
504
505
506
507 /*****************************************************************************
508 *
509 * C o n f i g u r a t i o n P a g e s
510 *
511 *****************************************************************************/
512
513 /****************************************************************************
514 * Manufacturing Config pages
515 ****************************************************************************/
516
517 #define MPI2_MFGPAGE_VENDORID_LSI (0x1000)
518
519 /*MPI v2.0 SAS products */
520 #define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070)
521 #define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072)
522 #define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074)
523 #define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076)
524 #define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
525 #define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
526 #define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
527
528 #define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E)
529
530 #define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
531 #define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
532 #define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
533 #define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
534 #define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
535 #define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
536 #define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
537 #define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
538 #define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
539 #define MPI2_MFGPAGE_DEVID_SAS2308_MPI_EP (0x02B0)
540
541 /*MPI v2.5 SAS products */
542 #define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096)
543 #define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097)
544 #define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090)
545 #define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091)
546 #define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094)
547 #define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095)
548
549 /* MPI v2.6 SAS Products */
550 #define MPI26_MFGPAGE_DEVID_SAS3216 (0x00C9)
551 #define MPI26_MFGPAGE_DEVID_SAS3224 (0x00C4)
552 #define MPI26_MFGPAGE_DEVID_SAS3316_1 (0x00C5)
553 #define MPI26_MFGPAGE_DEVID_SAS3316_2 (0x00C6)
554 #define MPI26_MFGPAGE_DEVID_SAS3316_3 (0x00C7)
555 #define MPI26_MFGPAGE_DEVID_SAS3316_4 (0x00C8)
556 #define MPI26_MFGPAGE_DEVID_SAS3324_1 (0x00C0)
557 #define MPI26_MFGPAGE_DEVID_SAS3324_2 (0x00C1)
558 #define MPI26_MFGPAGE_DEVID_SAS3324_3 (0x00C2)
559 #define MPI26_MFGPAGE_DEVID_SAS3324_4 (0x00C3)
560
561 #define MPI26_MFGPAGE_DEVID_SAS3516 (0x00AA)
562 #define MPI26_MFGPAGE_DEVID_SAS3516_1 (0x00AB)
563 #define MPI26_MFGPAGE_DEVID_SAS3416 (0x00AC)
564 #define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD)
565 #define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE)
566 #define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF)
567 #define MPI26_MFGPAGE_DEVID_SAS3716 (0x00D0)
568 #define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1)
569 #define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2)
570
571 #define MPI26_MFGPAGE_DEVID_SAS3816 (0x00A1)
572 #define MPI26_MFGPAGE_DEVID_SAS3916 (0x00A0)
573
574
575 /*Manufacturing Page 0 */
576
577 typedef struct _MPI2_CONFIG_PAGE_MAN_0 {
578 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
579 U8 ChipName[16]; /*0x04 */
580 U8 ChipRevision[8]; /*0x14 */
581 U8 BoardName[16]; /*0x1C */
582 U8 BoardAssembly[16]; /*0x2C */
583 U8 BoardTracerNumber[16]; /*0x3C */
584 } MPI2_CONFIG_PAGE_MAN_0,
585 *PTR_MPI2_CONFIG_PAGE_MAN_0,
586 Mpi2ManufacturingPage0_t,
587 *pMpi2ManufacturingPage0_t;
588
589 #define MPI2_MANUFACTURING0_PAGEVERSION (0x00)
590
591
592 /*Manufacturing Page 1 */
593
594 typedef struct _MPI2_CONFIG_PAGE_MAN_1 {
595 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
596 U8 VPD[256]; /*0x04 */
597 } MPI2_CONFIG_PAGE_MAN_1,
598 *PTR_MPI2_CONFIG_PAGE_MAN_1,
599 Mpi2ManufacturingPage1_t,
600 *pMpi2ManufacturingPage1_t;
601
602 #define MPI2_MANUFACTURING1_PAGEVERSION (0x00)
603
604
605 typedef struct _MPI2_CHIP_REVISION_ID {
606 U16 DeviceID; /*0x00 */
607 U8 PCIRevisionID; /*0x02 */
608 U8 Reserved; /*0x03 */
609 } MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID,
610 Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t;
611
612
613 /*Manufacturing Page 2 */
614
615 /*
616 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
617 *one and check Header.PageLength at runtime.
618 */
619 #ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
620 #define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
621 #endif
622
623 typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
624 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
625 MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
626 U32
627 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */
628 } MPI2_CONFIG_PAGE_MAN_2,
629 *PTR_MPI2_CONFIG_PAGE_MAN_2,
630 Mpi2ManufacturingPage2_t,
631 *pMpi2ManufacturingPage2_t;
632
633 #define MPI2_MANUFACTURING2_PAGEVERSION (0x00)
634
635
636 /*Manufacturing Page 3 */
637
638 /*
639 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
640 *one and check Header.PageLength at runtime.
641 */
642 #ifndef MPI2_MAN_PAGE_3_INFO_WORDS
643 #define MPI2_MAN_PAGE_3_INFO_WORDS (1)
644 #endif
645
646 typedef struct _MPI2_CONFIG_PAGE_MAN_3 {
647 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
648 MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
649 U32
650 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */
651 } MPI2_CONFIG_PAGE_MAN_3,
652 *PTR_MPI2_CONFIG_PAGE_MAN_3,
653 Mpi2ManufacturingPage3_t,
654 *pMpi2ManufacturingPage3_t;
655
656 #define MPI2_MANUFACTURING3_PAGEVERSION (0x00)
657
658
659 /*Manufacturing Page 4 */
660
661 typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS {
662 U8 PowerSaveFlags; /*0x00 */
663 U8 InternalOperationsSleepTime; /*0x01 */
664 U8 InternalOperationsRunTime; /*0x02 */
665 U8 HostIdleTime; /*0x03 */
666 } MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
667 *PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
668 Mpi2ManPage4PwrSaveSettings_t,
669 *pMpi2ManPage4PwrSaveSettings_t;
670
671 /*defines for the PowerSaveFlags field */
672 #define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03)
673 #define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00)
674 #define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01)
675 #define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02)
676
677 typedef struct _MPI2_CONFIG_PAGE_MAN_4 {
678 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
679 U32 Reserved1; /*0x04 */
680 U32 Flags; /*0x08 */
681 U8 InquirySize; /*0x0C */
682 U8 Reserved2; /*0x0D */
683 U16 Reserved3; /*0x0E */
684 U8 InquiryData[56]; /*0x10 */
685 U32 RAID0VolumeSettings; /*0x48 */
686 U32 RAID1EVolumeSettings; /*0x4C */
687 U32 RAID1VolumeSettings; /*0x50 */
688 U32 RAID10VolumeSettings; /*0x54 */
689 U32 Reserved4; /*0x58 */
690 U32 Reserved5; /*0x5C */
691 MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /*0x60 */
692 U8 MaxOCEDisks; /*0x64 */
693 U8 ResyncRate; /*0x65 */
694 U16 DataScrubDuration; /*0x66 */
695 U8 MaxHotSpares; /*0x68 */
696 U8 MaxPhysDisksPerVol; /*0x69 */
697 U8 MaxPhysDisks; /*0x6A */
698 U8 MaxVolumes; /*0x6B */
699 } MPI2_CONFIG_PAGE_MAN_4,
700 *PTR_MPI2_CONFIG_PAGE_MAN_4,
701 Mpi2ManufacturingPage4_t,
702 *pMpi2ManufacturingPage4_t;
703
704 #define MPI2_MANUFACTURING4_PAGEVERSION (0x0A)
705
706 /*Manufacturing Page 4 Flags field */
707 #define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000)
708 #define MPI2_MANPAGE4_METADATA_512MB (0x00000000)
709
710 #define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000)
711 #define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000)
712 #define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000)
713
714 #define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00)
715 #define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000)
716 #define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400)
717 #define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800)
718 #define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00)
719
720 #define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300)
721 #define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000)
722 #define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100)
723 #define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200)
724
725 #define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080)
726 #define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040)
727 #define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020)
728 #define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010)
729 #define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008)
730 #define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004)
731 #define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002)
732 #define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001)
733
734
735 /*Manufacturing Page 5 */
736
737 /*
738 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
739 *one and check the value returned for NumPhys at runtime.
740 */
741 #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
742 #define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
743 #endif
744
745 typedef struct _MPI2_MANUFACTURING5_ENTRY {
746 U64 WWID; /*0x00 */
747 U64 DeviceName; /*0x08 */
748 } MPI2_MANUFACTURING5_ENTRY,
749 *PTR_MPI2_MANUFACTURING5_ENTRY,
750 Mpi2Manufacturing5Entry_t,
751 *pMpi2Manufacturing5Entry_t;
752
753 typedef struct _MPI2_CONFIG_PAGE_MAN_5 {
754 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
755 U8 NumPhys; /*0x04 */
756 U8 Reserved1; /*0x05 */
757 U16 Reserved2; /*0x06 */
758 U32 Reserved3; /*0x08 */
759 U32 Reserved4; /*0x0C */
760 MPI2_MANUFACTURING5_ENTRY
761 Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */
762 } MPI2_CONFIG_PAGE_MAN_5,
763 *PTR_MPI2_CONFIG_PAGE_MAN_5,
764 Mpi2ManufacturingPage5_t,
765 *pMpi2ManufacturingPage5_t;
766
767 #define MPI2_MANUFACTURING5_PAGEVERSION (0x03)
768
769
770 /*Manufacturing Page 6 */
771
772 typedef struct _MPI2_CONFIG_PAGE_MAN_6 {
773 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
774 U32 ProductSpecificInfo;/*0x04 */
775 } MPI2_CONFIG_PAGE_MAN_6,
776 *PTR_MPI2_CONFIG_PAGE_MAN_6,
777 Mpi2ManufacturingPage6_t,
778 *pMpi2ManufacturingPage6_t;
779
780 #define MPI2_MANUFACTURING6_PAGEVERSION (0x00)
781
782
783 /*Manufacturing Page 7 */
784
785 typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
786 U32 Pinout; /*0x00 */
787 U8 Connector[16]; /*0x04 */
788 U8 Location; /*0x14 */
789 U8 ReceptacleID; /*0x15 */
790 U16 Slot; /*0x16 */
791 U32 Reserved2; /*0x18 */
792 } MPI2_MANPAGE7_CONNECTOR_INFO,
793 *PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
794 Mpi2ManPage7ConnectorInfo_t,
795 *pMpi2ManPage7ConnectorInfo_t;
796
797 /*defines for the Pinout field */
798 #define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00)
799 #define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8)
800
801 #define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF)
802 #define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00)
803 #define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01)
804 #define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02)
805 #define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03)
806 #define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04)
807 #define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05)
808 #define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06)
809 #define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07)
810 #define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08)
811 #define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09)
812 #define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A)
813 #define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
814 #define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
815 #define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
816 #define MPI2_MANPAGE7_PINOUT_SFF_8088_A (0x0E)
817 #define MPI2_MANPAGE7_PINOUT_SFF_8643_16i (0x0F)
818 #define MPI2_MANPAGE7_PINOUT_SFF_8654_4i (0x10)
819 #define MPI2_MANPAGE7_PINOUT_SFF_8654_8i (0x11)
820 #define MPI2_MANPAGE7_PINOUT_SFF_8611_4i (0x12)
821 #define MPI2_MANPAGE7_PINOUT_SFF_8611_8i (0x13)
822
823 /*defines for the Location field */
824 #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
825 #define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02)
826 #define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04)
827 #define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08)
828 #define MPI2_MANPAGE7_LOCATION_AUTO (0x10)
829 #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
830 #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
831
832 /*defines for the Slot field */
833 #define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF)
834
835 /*
836 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
837 *one and check the value returned for NumPhys at runtime.
838 */
839 #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
840 #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
841 #endif
842
843 typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
844 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
845 U32 Reserved1; /*0x04 */
846 U32 Reserved2; /*0x08 */
847 U32 Flags; /*0x0C */
848 U8 EnclosureName[16]; /*0x10 */
849 U8 NumPhys; /*0x20 */
850 U8 Reserved3; /*0x21 */
851 U16 Reserved4; /*0x22 */
852 MPI2_MANPAGE7_CONNECTOR_INFO
853 ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */
854 } MPI2_CONFIG_PAGE_MAN_7,
855 *PTR_MPI2_CONFIG_PAGE_MAN_7,
856 Mpi2ManufacturingPage7_t,
857 *pMpi2ManufacturingPage7_t;
858
859 #define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
860
861 /*defines for the Flags field */
862 #define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008)
863 #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
864 #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
865
866
867 /*
868 *Generic structure to use for product-specific manufacturing pages
869 *(currently Manufacturing Page 8 through Manufacturing Page 31).
870 */
871
872 typedef struct _MPI2_CONFIG_PAGE_MAN_PS {
873 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
874 U32 ProductSpecificInfo;/*0x04 */
875 } MPI2_CONFIG_PAGE_MAN_PS,
876 *PTR_MPI2_CONFIG_PAGE_MAN_PS,
877 Mpi2ManufacturingPagePS_t,
878 *pMpi2ManufacturingPagePS_t;
879
880 #define MPI2_MANUFACTURING8_PAGEVERSION (0x00)
881 #define MPI2_MANUFACTURING9_PAGEVERSION (0x00)
882 #define MPI2_MANUFACTURING10_PAGEVERSION (0x00)
883 #define MPI2_MANUFACTURING11_PAGEVERSION (0x00)
884 #define MPI2_MANUFACTURING12_PAGEVERSION (0x00)
885 #define MPI2_MANUFACTURING13_PAGEVERSION (0x00)
886 #define MPI2_MANUFACTURING14_PAGEVERSION (0x00)
887 #define MPI2_MANUFACTURING15_PAGEVERSION (0x00)
888 #define MPI2_MANUFACTURING16_PAGEVERSION (0x00)
889 #define MPI2_MANUFACTURING17_PAGEVERSION (0x00)
890 #define MPI2_MANUFACTURING18_PAGEVERSION (0x00)
891 #define MPI2_MANUFACTURING19_PAGEVERSION (0x00)
892 #define MPI2_MANUFACTURING20_PAGEVERSION (0x00)
893 #define MPI2_MANUFACTURING21_PAGEVERSION (0x00)
894 #define MPI2_MANUFACTURING22_PAGEVERSION (0x00)
895 #define MPI2_MANUFACTURING23_PAGEVERSION (0x00)
896 #define MPI2_MANUFACTURING24_PAGEVERSION (0x00)
897 #define MPI2_MANUFACTURING25_PAGEVERSION (0x00)
898 #define MPI2_MANUFACTURING26_PAGEVERSION (0x00)
899 #define MPI2_MANUFACTURING27_PAGEVERSION (0x00)
900 #define MPI2_MANUFACTURING28_PAGEVERSION (0x00)
901 #define MPI2_MANUFACTURING29_PAGEVERSION (0x00)
902 #define MPI2_MANUFACTURING30_PAGEVERSION (0x00)
903 #define MPI2_MANUFACTURING31_PAGEVERSION (0x00)
904
905
906 /****************************************************************************
907 * IO Unit Config Pages
908 ****************************************************************************/
909
910 /*IO Unit Page 0 */
911
912 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 {
913 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
914 U64 UniqueValue; /*0x04 */
915 MPI2_VERSION_UNION NvdataVersionDefault; /*0x08 */
916 MPI2_VERSION_UNION NvdataVersionPersistent; /*0x0A */
917 } MPI2_CONFIG_PAGE_IO_UNIT_0,
918 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
919 Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t;
920
921 #define MPI2_IOUNITPAGE0_PAGEVERSION (0x02)
922
923
924 /*IO Unit Page 1 */
925
926 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
927 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
928 U32 Flags; /*0x04 */
929 } MPI2_CONFIG_PAGE_IO_UNIT_1,
930 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
931 Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t;
932
933 #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
934
935 /*IO Unit Page 1 Flags defines */
936 #define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
937 #define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)
938 #define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)
939 #define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
940 #define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
941 #define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9)
942 #define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
943 #define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
944 #define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400)
945 #define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
946 #define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040)
947 #define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
948 #define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
949
950
951 /*IO Unit Page 3 */
952
953 /*
954 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
955 *one and check the value returned for GPIOCount at runtime.
956 */
957 #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
958 #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
959 #endif
960
961 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
962 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
963 U8 GPIOCount; /*0x04 */
964 U8 Reserved1; /*0x05 */
965 U16 Reserved2; /*0x06 */
966 U16
967 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */
968 } MPI2_CONFIG_PAGE_IO_UNIT_3,
969 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
970 Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t;
971
972 #define MPI2_IOUNITPAGE3_PAGEVERSION (0x01)
973
974 /*defines for IO Unit Page 3 GPIOVal field */
975 #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC)
976 #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
977 #define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000)
978 #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
979
980
981 /*IO Unit Page 5 */
982
983 /*
984 *Upper layer code (drivers, utilities, etc.) should leave this define set to
985 *one and check the value returned for NumDmaEngines at runtime.
986 */
987 #ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
988 #define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
989 #endif
990
991 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
992 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
993 U64
994 RaidAcceleratorBufferBaseAddress; /*0x04 */
995 U64
996 RaidAcceleratorBufferSize; /*0x0C */
997 U64
998 RaidAcceleratorControlBaseAddress; /*0x14 */
999 U8 RAControlSize; /*0x1C */
1000 U8 NumDmaEngines; /*0x1D */
1001 U8 RAMinControlSize; /*0x1E */
1002 U8 RAMaxControlSize; /*0x1F */
1003 U32 Reserved1; /*0x20 */
1004 U32 Reserved2; /*0x24 */
1005 U32 Reserved3; /*0x28 */
1006 U32
1007 DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */
1008 } MPI2_CONFIG_PAGE_IO_UNIT_5,
1009 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
1010 Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t;
1011
1012 #define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
1013
1014 /*defines for IO Unit Page 5 DmaEngineCapabilities field */
1015 #define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000)
1016 #define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
1017
1018 #define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
1019 #define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
1020 #define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
1021 #define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
1022
1023
1024 /*IO Unit Page 6 */
1025
1026 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
1027 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1028 U16 Flags; /*0x04 */
1029 U8 RAHostControlSize; /*0x06 */
1030 U8 Reserved0; /*0x07 */
1031 U64
1032 RaidAcceleratorHostControlBaseAddress; /*0x08 */
1033 U32 Reserved1; /*0x10 */
1034 U32 Reserved2; /*0x14 */
1035 U32 Reserved3; /*0x18 */
1036 } MPI2_CONFIG_PAGE_IO_UNIT_6,
1037 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
1038 Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t;
1039
1040 #define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
1041
1042 /*defines for IO Unit Page 6 Flags field */
1043 #define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
1044
1045
1046 /*IO Unit Page 7 */
1047
1048 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
1049 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1050 U8 CurrentPowerMode; /*0x04 */
1051 U8 PreviousPowerMode; /*0x05 */
1052 U8 PCIeWidth; /*0x06 */
1053 U8 PCIeSpeed; /*0x07 */
1054 U32 ProcessorState; /*0x08 */
1055 U32
1056 PowerManagementCapabilities; /*0x0C */
1057 U16 IOCTemperature; /*0x10 */
1058 U8
1059 IOCTemperatureUnits; /*0x12 */
1060 U8 IOCSpeed; /*0x13 */
1061 U16 BoardTemperature; /*0x14 */
1062 U8
1063 BoardTemperatureUnits; /*0x16 */
1064 U8 Reserved3; /*0x17 */
1065 U32 BoardPowerRequirement; /*0x18 */
1066 U32 PCISlotPowerAllocation; /*0x1C */
1067 /* reserved prior to MPI v2.6 */
1068 U8 Flags; /* 0x20 */
1069 U8 Reserved6; /* 0x21 */
1070 U16 Reserved7; /* 0x22 */
1071 U32 Reserved8; /* 0x24 */
1072 } MPI2_CONFIG_PAGE_IO_UNIT_7,
1073 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
1074 Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t;
1075
1076 #define MPI2_IOUNITPAGE7_PAGEVERSION (0x05)
1077
1078 /*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */
1079 #define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0)
1080 #define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00)
1081 #define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40)
1082 #define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80)
1083 #define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0)
1084
1085 #define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07)
1086 #define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00)
1087 #define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01)
1088 #define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04)
1089 #define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05)
1090 #define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06)
1091
1092
1093 /*defines for IO Unit Page 7 PCIeWidth field */
1094 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
1095 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
1096 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
1097 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
1098 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16 (0x10)
1099
1100 /*defines for IO Unit Page 7 PCIeSpeed field */
1101 #define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
1102 #define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
1103 #define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
1104 #define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS (0x03)
1105
1106 /*defines for IO Unit Page 7 ProcessorState field */
1107 #define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
1108 #define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
1109
1110 #define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
1111 #define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
1112 #define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
1113
1114 /*defines for IO Unit Page 7 PowerManagementCapabilities field */
1115 #define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000)
1116 #define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000)
1117 #define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000)
1118 #define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000)
1119 #define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000)
1120 #define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000)
1121 #define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000)
1122 #define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000)
1123 #define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000)
1124 #define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400)
1125 #define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200)
1126 #define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100)
1127 #define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040)
1128 #define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020)
1129 #define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010)
1130 #define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008)
1131 #define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004)
1132 #define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002)
1133 #define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001)
1134
1135 /*obsolete names for the PowerManagementCapabilities bits (above) */
1136 #define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
1137 #define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
1138 #define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
1139 #define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /*obsolete */
1140 #define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /*obsolete */
1141
1142
1143 /*defines for IO Unit Page 7 IOCTemperatureUnits field */
1144 #define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
1145 #define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
1146 #define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
1147
1148 /*defines for IO Unit Page 7 IOCSpeed field */
1149 #define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
1150 #define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
1151 #define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
1152 #define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
1153
1154 /*defines for IO Unit Page 7 BoardTemperatureUnits field */
1155 #define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00)
1156 #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
1157 #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
1158
1159 /* defines for IO Unit Page 7 Flags field */
1160 #define MPI2_IOUNITPAGE7_FLAG_CABLE_POWER_EXC (0x01)
1161
1162 /*IO Unit Page 8 */
1163
1164 #define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
1165
1166 typedef struct _MPI2_IOUNIT8_SENSOR {
1167 U16 Flags; /*0x00 */
1168 U16 Reserved1; /*0x02 */
1169 U16
1170 Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */
1171 U32 Reserved2; /*0x0C */
1172 U32 Reserved3; /*0x10 */
1173 U32 Reserved4; /*0x14 */
1174 } MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR,
1175 Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t;
1176
1177 /*defines for IO Unit Page 8 Sensor Flags field */
1178 #define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
1179 #define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
1180 #define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
1181 #define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
1182
1183 /*
1184 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1185 *one and check the value returned for NumSensors at runtime.
1186 */
1187 #ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
1188 #define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
1189 #endif
1190
1191 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
1192 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1193 U32 Reserved1; /*0x04 */
1194 U32 Reserved2; /*0x08 */
1195 U8 NumSensors; /*0x0C */
1196 U8 PollingInterval; /*0x0D */
1197 U16 Reserved3; /*0x0E */
1198 MPI2_IOUNIT8_SENSOR
1199 Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */
1200 } MPI2_CONFIG_PAGE_IO_UNIT_8,
1201 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
1202 Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t;
1203
1204 #define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
1205
1206
1207 /*IO Unit Page 9 */
1208
1209 typedef struct _MPI2_IOUNIT9_SENSOR {
1210 U16 CurrentTemperature; /*0x00 */
1211 U16 Reserved1; /*0x02 */
1212 U8 Flags; /*0x04 */
1213 U8 Reserved2; /*0x05 */
1214 U16 Reserved3; /*0x06 */
1215 U32 Reserved4; /*0x08 */
1216 U32 Reserved5; /*0x0C */
1217 } MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR,
1218 Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t;
1219
1220 /*defines for IO Unit Page 9 Sensor Flags field */
1221 #define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
1222
1223 /*
1224 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1225 *one and check the value returned for NumSensors at runtime.
1226 */
1227 #ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
1228 #define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
1229 #endif
1230
1231 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
1232 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1233 U32 Reserved1; /*0x04 */
1234 U32 Reserved2; /*0x08 */
1235 U8 NumSensors; /*0x0C */
1236 U8 Reserved4; /*0x0D */
1237 U16 Reserved3; /*0x0E */
1238 MPI2_IOUNIT9_SENSOR
1239 Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */
1240 } MPI2_CONFIG_PAGE_IO_UNIT_9,
1241 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
1242 Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t;
1243
1244 #define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
1245
1246
1247 /*IO Unit Page 10 */
1248
1249 typedef struct _MPI2_IOUNIT10_FUNCTION {
1250 U8 CreditPercent; /*0x00 */
1251 U8 Reserved1; /*0x01 */
1252 U16 Reserved2; /*0x02 */
1253 } MPI2_IOUNIT10_FUNCTION,
1254 *PTR_MPI2_IOUNIT10_FUNCTION,
1255 Mpi2IOUnit10Function_t,
1256 *pMpi2IOUnit10Function_t;
1257
1258 /*
1259 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1260 *one and check the value returned for NumFunctions at runtime.
1261 */
1262 #ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
1263 #define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
1264 #endif
1265
1266 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
1267 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1268 U8 NumFunctions; /*0x04 */
1269 U8 Reserved1; /*0x05 */
1270 U16 Reserved2; /*0x06 */
1271 U32 Reserved3; /*0x08 */
1272 U32 Reserved4; /*0x0C */
1273 MPI2_IOUNIT10_FUNCTION
1274 Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */
1275 } MPI2_CONFIG_PAGE_IO_UNIT_10,
1276 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
1277 Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t;
1278
1279 #define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
1280
1281
1282 /* IO Unit Page 11 (for MPI v2.6 and later) */
1283
1284 typedef struct _MPI26_IOUNIT11_SPINUP_GROUP {
1285 U8 MaxTargetSpinup; /* 0x00 */
1286 U8 SpinupDelay; /* 0x01 */
1287 U8 SpinupFlags; /* 0x02 */
1288 U8 Reserved1; /* 0x03 */
1289 } MPI26_IOUNIT11_SPINUP_GROUP,
1290 *PTR_MPI26_IOUNIT11_SPINUP_GROUP,
1291 Mpi26IOUnit11SpinupGroup_t,
1292 *pMpi26IOUnit11SpinupGroup_t;
1293
1294 /* defines for IO Unit Page 11 SpinupFlags */
1295 #define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG (0x01)
1296
1297
1298 /*
1299 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1300 * four and check the value returned for NumPhys at runtime.
1301 */
1302 #ifndef MPI26_IOUNITPAGE11_PHY_MAX
1303 #define MPI26_IOUNITPAGE11_PHY_MAX (4)
1304 #endif
1305
1306 typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 {
1307 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1308 U32 Reserved1; /*0x04 */
1309 MPI26_IOUNIT11_SPINUP_GROUP SpinupGroupParameters[4]; /*0x08 */
1310 U32 Reserved2; /*0x18 */
1311 U32 Reserved3; /*0x1C */
1312 U32 Reserved4; /*0x20 */
1313 U8 BootDeviceWaitTime; /*0x24 */
1314 U8 Reserved5; /*0x25 */
1315 U16 Reserved6; /*0x26 */
1316 U8 NumPhys; /*0x28 */
1317 U8 PEInitialSpinupDelay; /*0x29 */
1318 U8 PEReplyDelay; /*0x2A */
1319 U8 Flags; /*0x2B */
1320 U8 PHY[MPI26_IOUNITPAGE11_PHY_MAX];/*0x2C */
1321 } MPI26_CONFIG_PAGE_IO_UNIT_11,
1322 *PTR_MPI26_CONFIG_PAGE_IO_UNIT_11,
1323 Mpi26IOUnitPage11_t,
1324 *pMpi26IOUnitPage11_t;
1325
1326 #define MPI26_IOUNITPAGE11_PAGEVERSION (0x00)
1327
1328 /* defines for Flags field */
1329 #define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE (0x01)
1330
1331 /* defines for PHY field */
1332 #define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK (0x03)
1333
1334
1335
1336
1337
1338
1339 /****************************************************************************
1340 * IOC Config Pages
1341 ****************************************************************************/
1342
1343 /*IOC Page 0 */
1344
1345 typedef struct _MPI2_CONFIG_PAGE_IOC_0 {
1346 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1347 U32 Reserved1; /*0x04 */
1348 U32 Reserved2; /*0x08 */
1349 U16 VendorID; /*0x0C */
1350 U16 DeviceID; /*0x0E */
1351 U8 RevisionID; /*0x10 */
1352 U8 Reserved3; /*0x11 */
1353 U16 Reserved4; /*0x12 */
1354 U32 ClassCode; /*0x14 */
1355 U16 SubsystemVendorID; /*0x18 */
1356 U16 SubsystemID; /*0x1A */
1357 } MPI2_CONFIG_PAGE_IOC_0,
1358 *PTR_MPI2_CONFIG_PAGE_IOC_0,
1359 Mpi2IOCPage0_t, *pMpi2IOCPage0_t;
1360
1361 #define MPI2_IOCPAGE0_PAGEVERSION (0x02)
1362
1363
1364 /*IOC Page 1 */
1365
1366 typedef struct _MPI2_CONFIG_PAGE_IOC_1 {
1367 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1368 U32 Flags; /*0x04 */
1369 U32 CoalescingTimeout; /*0x08 */
1370 U8 CoalescingDepth; /*0x0C */
1371 U8 PCISlotNum; /*0x0D */
1372 U8 PCIBusNum; /*0x0E */
1373 U8 PCIDomainSegment; /*0x0F */
1374 U32 Reserved1; /*0x10 */
1375 U32 Reserved2; /*0x14 */
1376 } MPI2_CONFIG_PAGE_IOC_1,
1377 *PTR_MPI2_CONFIG_PAGE_IOC_1,
1378 Mpi2IOCPage1_t, *pMpi2IOCPage1_t;
1379
1380 #define MPI2_IOCPAGE1_PAGEVERSION (0x05)
1381
1382 /*defines for IOC Page 1 Flags field */
1383 #define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001)
1384
1385 #define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
1386 #define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF)
1387 #define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF)
1388
1389 /*IOC Page 6 */
1390
1391 typedef struct _MPI2_CONFIG_PAGE_IOC_6 {
1392 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1393 U32
1394 CapabilitiesFlags; /*0x04 */
1395 U8 MaxDrivesRAID0; /*0x08 */
1396 U8 MaxDrivesRAID1; /*0x09 */
1397 U8
1398 MaxDrivesRAID1E; /*0x0A */
1399 U8
1400 MaxDrivesRAID10; /*0x0B */
1401 U8 MinDrivesRAID0; /*0x0C */
1402 U8 MinDrivesRAID1; /*0x0D */
1403 U8
1404 MinDrivesRAID1E; /*0x0E */
1405 U8
1406 MinDrivesRAID10; /*0x0F */
1407 U32 Reserved1; /*0x10 */
1408 U8
1409 MaxGlobalHotSpares; /*0x14 */
1410 U8 MaxPhysDisks; /*0x15 */
1411 U8 MaxVolumes; /*0x16 */
1412 U8 MaxConfigs; /*0x17 */
1413 U8 MaxOCEDisks; /*0x18 */
1414 U8 Reserved2; /*0x19 */
1415 U16 Reserved3; /*0x1A */
1416 U32
1417 SupportedStripeSizeMapRAID0; /*0x1C */
1418 U32
1419 SupportedStripeSizeMapRAID1E; /*0x20 */
1420 U32
1421 SupportedStripeSizeMapRAID10; /*0x24 */
1422 U32 Reserved4; /*0x28 */
1423 U32 Reserved5; /*0x2C */
1424 U16
1425 DefaultMetadataSize; /*0x30 */
1426 U16 Reserved6; /*0x32 */
1427 U16
1428 MaxBadBlockTableEntries; /*0x34 */
1429 U16 Reserved7; /*0x36 */
1430 U32
1431 IRNvsramVersion; /*0x38 */
1432 } MPI2_CONFIG_PAGE_IOC_6,
1433 *PTR_MPI2_CONFIG_PAGE_IOC_6,
1434 Mpi2IOCPage6_t, *pMpi2IOCPage6_t;
1435
1436 #define MPI2_IOCPAGE6_PAGEVERSION (0x05)
1437
1438 /*defines for IOC Page 6 CapabilitiesFlags */
1439 #define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020)
1440 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010)
1441 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008)
1442 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004)
1443 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002)
1444 #define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
1445
1446
1447 /*IOC Page 7 */
1448
1449 #define MPI2_IOCPAGE7_EVENTMASK_WORDS (4)
1450
1451 typedef struct _MPI2_CONFIG_PAGE_IOC_7 {
1452 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1453 U32 Reserved1; /*0x04 */
1454 U32
1455 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */
1456 U16 SASBroadcastPrimitiveMasks; /*0x18 */
1457 U16 SASNotifyPrimitiveMasks; /*0x1A */
1458 U32 Reserved3; /*0x1C */
1459 } MPI2_CONFIG_PAGE_IOC_7,
1460 *PTR_MPI2_CONFIG_PAGE_IOC_7,
1461 Mpi2IOCPage7_t, *pMpi2IOCPage7_t;
1462
1463 #define MPI2_IOCPAGE7_PAGEVERSION (0x02)
1464
1465
1466 /*IOC Page 8 */
1467
1468 typedef struct _MPI2_CONFIG_PAGE_IOC_8 {
1469 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1470 U8 NumDevsPerEnclosure; /*0x04 */
1471 U8 Reserved1; /*0x05 */
1472 U16 Reserved2; /*0x06 */
1473 U16 MaxPersistentEntries; /*0x08 */
1474 U16 MaxNumPhysicalMappedIDs; /*0x0A */
1475 U16 Flags; /*0x0C */
1476 U16 Reserved3; /*0x0E */
1477 U16 IRVolumeMappingFlags; /*0x10 */
1478 U16 Reserved4; /*0x12 */
1479 U32 Reserved5; /*0x14 */
1480 } MPI2_CONFIG_PAGE_IOC_8,
1481 *PTR_MPI2_CONFIG_PAGE_IOC_8,
1482 Mpi2IOCPage8_t, *pMpi2IOCPage8_t;
1483
1484 #define MPI2_IOCPAGE8_PAGEVERSION (0x00)
1485
1486 /*defines for IOC Page 8 Flags field */
1487 #define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020)
1488 #define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010)
1489
1490 #define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E)
1491 #define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000)
1492 #define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002)
1493
1494 #define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001)
1495 #define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000)
1496
1497 /*defines for IOC Page 8 IRVolumeMappingFlags */
1498 #define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003)
1499 #define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000)
1500 #define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001)
1501
1502
1503 /****************************************************************************
1504 * BIOS Config Pages
1505 ****************************************************************************/
1506
1507 /*BIOS Page 1 */
1508
1509 typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
1510 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1511 U32 BiosOptions; /*0x04 */
1512 U32 IOCSettings; /*0x08 */
1513 U8 SSUTimeout; /*0x0C */
1514 U8 Reserved1; /*0x0D */
1515 U16 Reserved2; /*0x0E */
1516 U32 DeviceSettings; /*0x10 */
1517 U16 NumberOfDevices; /*0x14 */
1518 U16 UEFIVersion; /*0x16 */
1519 U16 IOTimeoutBlockDevicesNonRM; /*0x18 */
1520 U16 IOTimeoutSequential; /*0x1A */
1521 U16 IOTimeoutOther; /*0x1C */
1522 U16 IOTimeoutBlockDevicesRM; /*0x1E */
1523 } MPI2_CONFIG_PAGE_BIOS_1,
1524 *PTR_MPI2_CONFIG_PAGE_BIOS_1,
1525 Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
1526
1527 #define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
1528
1529 /*values for BIOS Page 1 BiosOptions field */
1530 #define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000)
1531 #define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000)
1532
1533 #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
1534 #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
1535 #define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
1536 #define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
1537 #define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000)
1538 #define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800)
1539 #define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000)
1540
1541 #define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400)
1542
1543 #define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300)
1544 #define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000)
1545 #define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100)
1546 #define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200)
1547 #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300)
1548
1549 #define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
1550 #define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
1551
1552 #define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
1553 #define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
1554 #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
1555 #define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004)
1556
1557 #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
1558
1559 /*values for BIOS Page 1 IOCSettings field */
1560 #define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
1561 #define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
1562 #define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
1563
1564 #define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
1565 #define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
1566 #define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
1567 #define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
1568
1569 #define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
1570 #define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
1571 #define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
1572 #define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
1573 #define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
1574
1575 #define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
1576
1577 /*values for BIOS Page 1 DeviceSettings field */
1578 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
1579 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
1580 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
1581 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
1582 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
1583
1584 /*defines for BIOS Page 1 UEFIVersion field */
1585 #define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00)
1586 #define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8)
1587 #define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF)
1588 #define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0)
1589
1590
1591
1592 /*BIOS Page 2 */
1593
1594 typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER {
1595 U32 Reserved1; /*0x00 */
1596 U32 Reserved2; /*0x04 */
1597 U32 Reserved3; /*0x08 */
1598 U32 Reserved4; /*0x0C */
1599 U32 Reserved5; /*0x10 */
1600 U32 Reserved6; /*0x14 */
1601 } MPI2_BOOT_DEVICE_ADAPTER_ORDER,
1602 *PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
1603 Mpi2BootDeviceAdapterOrder_t,
1604 *pMpi2BootDeviceAdapterOrder_t;
1605
1606 typedef struct _MPI2_BOOT_DEVICE_SAS_WWID {
1607 U64 SASAddress; /*0x00 */
1608 U8 LUN[8]; /*0x08 */
1609 U32 Reserved1; /*0x10 */
1610 U32 Reserved2; /*0x14 */
1611 } MPI2_BOOT_DEVICE_SAS_WWID,
1612 *PTR_MPI2_BOOT_DEVICE_SAS_WWID,
1613 Mpi2BootDeviceSasWwid_t,
1614 *pMpi2BootDeviceSasWwid_t;
1615
1616 typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT {
1617 U64 EnclosureLogicalID; /*0x00 */
1618 U32 Reserved1; /*0x08 */
1619 U32 Reserved2; /*0x0C */
1620 U16 SlotNumber; /*0x10 */
1621 U16 Reserved3; /*0x12 */
1622 U32 Reserved4; /*0x14 */
1623 } MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
1624 *PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
1625 Mpi2BootDeviceEnclosureSlot_t,
1626 *pMpi2BootDeviceEnclosureSlot_t;
1627
1628 typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME {
1629 U64 DeviceName; /*0x00 */
1630 U8 LUN[8]; /*0x08 */
1631 U32 Reserved1; /*0x10 */
1632 U32 Reserved2; /*0x14 */
1633 } MPI2_BOOT_DEVICE_DEVICE_NAME,
1634 *PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
1635 Mpi2BootDeviceDeviceName_t,
1636 *pMpi2BootDeviceDeviceName_t;
1637
1638 typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE {
1639 MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder;
1640 MPI2_BOOT_DEVICE_SAS_WWID SasWwid;
1641 MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
1642 MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName;
1643 } MPI2_BIOSPAGE2_BOOT_DEVICE,
1644 *PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
1645 Mpi2BiosPage2BootDevice_t,
1646 *pMpi2BiosPage2BootDevice_t;
1647
1648 typedef struct _MPI2_CONFIG_PAGE_BIOS_2 {
1649 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1650 U32 Reserved1; /*0x04 */
1651 U32 Reserved2; /*0x08 */
1652 U32 Reserved3; /*0x0C */
1653 U32 Reserved4; /*0x10 */
1654 U32 Reserved5; /*0x14 */
1655 U32 Reserved6; /*0x18 */
1656 U8 ReqBootDeviceForm; /*0x1C */
1657 U8 Reserved7; /*0x1D */
1658 U16 Reserved8; /*0x1E */
1659 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /*0x20 */
1660 U8 ReqAltBootDeviceForm; /*0x38 */
1661 U8 Reserved9; /*0x39 */
1662 U16 Reserved10; /*0x3A */
1663 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /*0x3C */
1664 U8 CurrentBootDeviceForm; /*0x58 */
1665 U8 Reserved11; /*0x59 */
1666 U16 Reserved12; /*0x5A */
1667 MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /*0x58 */
1668 } MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2,
1669 Mpi2BiosPage2_t, *pMpi2BiosPage2_t;
1670
1671 #define MPI2_BIOSPAGE2_PAGEVERSION (0x04)
1672
1673 /*values for BIOS Page 2 BootDeviceForm fields */
1674 #define MPI2_BIOSPAGE2_FORM_MASK (0x0F)
1675 #define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00)
1676 #define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05)
1677 #define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
1678 #define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07)
1679
1680
1681 /*BIOS Page 3 */
1682
1683 #define MPI2_BIOSPAGE3_NUM_ADAPTER (4)
1684
1685 typedef struct _MPI2_ADAPTER_INFO {
1686 U8 PciBusNumber; /*0x00 */
1687 U8 PciDeviceAndFunctionNumber; /*0x01 */
1688 U16 AdapterFlags; /*0x02 */
1689 } MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO,
1690 Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t;
1691
1692 #define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
1693 #define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
1694
1695 typedef struct _MPI2_ADAPTER_ORDER_AUX {
1696 U64 WWID; /* 0x00 */
1697 U32 Reserved1; /* 0x08 */
1698 U32 Reserved2; /* 0x0C */
1699 } MPI2_ADAPTER_ORDER_AUX, *PTR_MPI2_ADAPTER_ORDER_AUX,
1700 Mpi2AdapterOrderAux_t, *pMpi2AdapterOrderAux_t;
1701
1702
1703 typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
1704 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1705 U32 GlobalFlags; /*0x04 */
1706 U32 BiosVersion; /*0x08 */
1707 MPI2_ADAPTER_INFO AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER];
1708 U32 Reserved1; /*0x1C */
1709 MPI2_ADAPTER_ORDER_AUX AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER];
1710 } MPI2_CONFIG_PAGE_BIOS_3,
1711 *PTR_MPI2_CONFIG_PAGE_BIOS_3,
1712 Mpi2BiosPage3_t, *pMpi2BiosPage3_t;
1713
1714 #define MPI2_BIOSPAGE3_PAGEVERSION (0x01)
1715
1716 /*values for BIOS Page 3 GlobalFlags */
1717 #define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
1718 #define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004)
1719 #define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010)
1720
1721 #define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
1722 #define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
1723 #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020)
1724 #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
1725
1726
1727 /*BIOS Page 4 */
1728
1729 /*
1730 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1731 *one and check the value returned for NumPhys at runtime.
1732 */
1733 #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
1734 #define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
1735 #endif
1736
1737 typedef struct _MPI2_BIOS4_ENTRY {
1738 U64 ReassignmentWWID; /*0x00 */
1739 U64 ReassignmentDeviceName; /*0x08 */
1740 } MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY,
1741 Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t;
1742
1743 typedef struct _MPI2_CONFIG_PAGE_BIOS_4 {
1744 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1745 U8 NumPhys; /*0x04 */
1746 U8 Reserved1; /*0x05 */
1747 U16 Reserved2; /*0x06 */
1748 MPI2_BIOS4_ENTRY
1749 Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */
1750 } MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4,
1751 Mpi2BiosPage4_t, *pMpi2BiosPage4_t;
1752
1753 #define MPI2_BIOSPAGE4_PAGEVERSION (0x01)
1754
1755
1756 /****************************************************************************
1757 * RAID Volume Config Pages
1758 ****************************************************************************/
1759
1760 /*RAID Volume Page 0 */
1761
1762 typedef struct _MPI2_RAIDVOL0_PHYS_DISK {
1763 U8 RAIDSetNum; /*0x00 */
1764 U8 PhysDiskMap; /*0x01 */
1765 U8 PhysDiskNum; /*0x02 */
1766 U8 Reserved; /*0x03 */
1767 } MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK,
1768 Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t;
1769
1770 /*defines for the PhysDiskMap field */
1771 #define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
1772 #define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
1773
1774 typedef struct _MPI2_RAIDVOL0_SETTINGS {
1775 U16 Settings; /*0x00 */
1776 U8 HotSparePool; /*0x01 */
1777 U8 Reserved; /*0x02 */
1778 } MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS,
1779 Mpi2RaidVol0Settings_t,
1780 *pMpi2RaidVol0Settings_t;
1781
1782 /*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
1783 #define MPI2_RAID_HOT_SPARE_POOL_0 (0x01)
1784 #define MPI2_RAID_HOT_SPARE_POOL_1 (0x02)
1785 #define MPI2_RAID_HOT_SPARE_POOL_2 (0x04)
1786 #define MPI2_RAID_HOT_SPARE_POOL_3 (0x08)
1787 #define MPI2_RAID_HOT_SPARE_POOL_4 (0x10)
1788 #define MPI2_RAID_HOT_SPARE_POOL_5 (0x20)
1789 #define MPI2_RAID_HOT_SPARE_POOL_6 (0x40)
1790 #define MPI2_RAID_HOT_SPARE_POOL_7 (0x80)
1791
1792 /*RAID Volume Page 0 VolumeSettings defines */
1793 #define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008)
1794 #define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
1795
1796 #define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003)
1797 #define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000)
1798 #define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001)
1799 #define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002)
1800
1801 /*
1802 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1803 *one and check the value returned for NumPhysDisks at runtime.
1804 */
1805 #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
1806 #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
1807 #endif
1808
1809 typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 {
1810 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1811 U16 DevHandle; /*0x04 */
1812 U8 VolumeState; /*0x06 */
1813 U8 VolumeType; /*0x07 */
1814 U32 VolumeStatusFlags; /*0x08 */
1815 MPI2_RAIDVOL0_SETTINGS VolumeSettings; /*0x0C */
1816 U64 MaxLBA; /*0x10 */
1817 U32 StripeSize; /*0x18 */
1818 U16 BlockSize; /*0x1C */
1819 U16 Reserved1; /*0x1E */
1820 U8 SupportedPhysDisks;/*0x20 */
1821 U8 ResyncRate; /*0x21 */
1822 U16 DataScrubDuration; /*0x22 */
1823 U8 NumPhysDisks; /*0x24 */
1824 U8 Reserved2; /*0x25 */
1825 U8 Reserved3; /*0x26 */
1826 U8 InactiveStatus; /*0x27 */
1827 MPI2_RAIDVOL0_PHYS_DISK
1828 PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */
1829 } MPI2_CONFIG_PAGE_RAID_VOL_0,
1830 *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
1831 Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t;
1832
1833 #define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A)
1834
1835 /*values for RAID VolumeState */
1836 #define MPI2_RAID_VOL_STATE_MISSING (0x00)
1837 #define MPI2_RAID_VOL_STATE_FAILED (0x01)
1838 #define MPI2_RAID_VOL_STATE_INITIALIZING (0x02)
1839 #define MPI2_RAID_VOL_STATE_ONLINE (0x03)
1840 #define MPI2_RAID_VOL_STATE_DEGRADED (0x04)
1841 #define MPI2_RAID_VOL_STATE_OPTIMAL (0x05)
1842
1843 /*values for RAID VolumeType */
1844 #define MPI2_RAID_VOL_TYPE_RAID0 (0x00)
1845 #define MPI2_RAID_VOL_TYPE_RAID1E (0x01)
1846 #define MPI2_RAID_VOL_TYPE_RAID1 (0x02)
1847 #define MPI2_RAID_VOL_TYPE_RAID10 (0x05)
1848 #define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF)
1849
1850 /*values for RAID Volume Page 0 VolumeStatusFlags field */
1851 #define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000)
1852 #define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000)
1853 #define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000)
1854 #define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000)
1855 #define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000)
1856 #define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000)
1857 #define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000)
1858 #define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000)
1859 #define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000)
1860 #define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000)
1861 #define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080)
1862 #define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040)
1863 #define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020)
1864 #define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000)
1865 #define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010)
1866 #define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008)
1867 #define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004)
1868 #define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002)
1869 #define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001)
1870
1871 /*values for RAID Volume Page 0 SupportedPhysDisks field */
1872 #define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08)
1873 #define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04)
1874 #define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02)
1875 #define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01)
1876
1877 /*values for RAID Volume Page 0 InactiveStatus field */
1878 #define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
1879 #define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01)
1880 #define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02)
1881 #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
1882 #define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04)
1883 #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
1884 #define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06)
1885
1886
1887 /*RAID Volume Page 1 */
1888
1889 typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 {
1890 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1891 U16 DevHandle; /*0x04 */
1892 U16 Reserved0; /*0x06 */
1893 U8 GUID[24]; /*0x08 */
1894 U8 Name[16]; /*0x20 */
1895 U64 WWID; /*0x30 */
1896 U32 Reserved1; /*0x38 */
1897 U32 Reserved2; /*0x3C */
1898 } MPI2_CONFIG_PAGE_RAID_VOL_1,
1899 *PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
1900 Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t;
1901
1902 #define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03)
1903
1904
1905 /****************************************************************************
1906 * RAID Physical Disk Config Pages
1907 ****************************************************************************/
1908
1909 /*RAID Physical Disk Page 0 */
1910
1911 typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS {
1912 U16 Reserved1; /*0x00 */
1913 U8 HotSparePool; /*0x02 */
1914 U8 Reserved2; /*0x03 */
1915 } MPI2_RAIDPHYSDISK0_SETTINGS,
1916 *PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
1917 Mpi2RaidPhysDisk0Settings_t,
1918 *pMpi2RaidPhysDisk0Settings_t;
1919
1920 /*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
1921
1922 typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA {
1923 U8 VendorID[8]; /*0x00 */
1924 U8 ProductID[16]; /*0x08 */
1925 U8 ProductRevLevel[4]; /*0x18 */
1926 U8 SerialNum[32]; /*0x1C */
1927 } MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
1928 *PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
1929 Mpi2RaidPhysDisk0InquiryData_t,
1930 *pMpi2RaidPhysDisk0InquiryData_t;
1931
1932 typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 {
1933 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1934 U16 DevHandle; /*0x04 */
1935 U8 Reserved1; /*0x06 */
1936 U8 PhysDiskNum; /*0x07 */
1937 MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /*0x08 */
1938 U32 Reserved2; /*0x0C */
1939 MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /*0x10 */
1940 U32 Reserved3; /*0x4C */
1941 U8 PhysDiskState; /*0x50 */
1942 U8 OfflineReason; /*0x51 */
1943 U8 IncompatibleReason; /*0x52 */
1944 U8 PhysDiskAttributes; /*0x53 */
1945 U32 PhysDiskStatusFlags;/*0x54 */
1946 U64 DeviceMaxLBA; /*0x58 */
1947 U64 HostMaxLBA; /*0x60 */
1948 U64 CoercedMaxLBA; /*0x68 */
1949 U16 BlockSize; /*0x70 */
1950 U16 Reserved5; /*0x72 */
1951 U32 Reserved6; /*0x74 */
1952 } MPI2_CONFIG_PAGE_RD_PDISK_0,
1953 *PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
1954 Mpi2RaidPhysDiskPage0_t,
1955 *pMpi2RaidPhysDiskPage0_t;
1956
1957 #define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05)
1958
1959 /*PhysDiskState defines */
1960 #define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00)
1961 #define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01)
1962 #define MPI2_RAID_PD_STATE_OFFLINE (0x02)
1963 #define MPI2_RAID_PD_STATE_ONLINE (0x03)
1964 #define MPI2_RAID_PD_STATE_HOT_SPARE (0x04)
1965 #define MPI2_RAID_PD_STATE_DEGRADED (0x05)
1966 #define MPI2_RAID_PD_STATE_REBUILDING (0x06)
1967 #define MPI2_RAID_PD_STATE_OPTIMAL (0x07)
1968
1969 /*OfflineReason defines */
1970 #define MPI2_PHYSDISK0_ONLINE (0x00)
1971 #define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01)
1972 #define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03)
1973 #define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04)
1974 #define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05)
1975 #define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06)
1976 #define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF)
1977
1978 /*IncompatibleReason defines */
1979 #define MPI2_PHYSDISK0_COMPATIBLE (0x00)
1980 #define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01)
1981 #define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02)
1982 #define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03)
1983 #define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04)
1984 #define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05)
1985 #define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06)
1986 #define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF)
1987
1988 /*PhysDiskAttributes defines */
1989 #define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C)
1990 #define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08)
1991 #define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04)
1992
1993 #define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03)
1994 #define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02)
1995 #define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01)
1996
1997 /*PhysDiskStatusFlags defines */
1998 #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040)
1999 #define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020)
2000 #define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010)
2001 #define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000)
2002 #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
2003 #define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004)
2004 #define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002)
2005 #define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001)
2006
2007
2008 /*RAID Physical Disk Page 1 */
2009
2010 /*
2011 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2012 *one and check the value returned for NumPhysDiskPaths at runtime.
2013 */
2014 #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
2015 #define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
2016 #endif
2017
2018 typedef struct _MPI2_RAIDPHYSDISK1_PATH {
2019 U16 DevHandle; /*0x00 */
2020 U16 Reserved1; /*0x02 */
2021 U64 WWID; /*0x04 */
2022 U64 OwnerWWID; /*0x0C */
2023 U8 OwnerIdentifier; /*0x14 */
2024 U8 Reserved2; /*0x15 */
2025 U16 Flags; /*0x16 */
2026 } MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH,
2027 Mpi2RaidPhysDisk1Path_t,
2028 *pMpi2RaidPhysDisk1Path_t;
2029
2030 /*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
2031 #define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004)
2032 #define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
2033 #define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
2034
2035 typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
2036 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
2037 U8 NumPhysDiskPaths; /*0x04 */
2038 U8 PhysDiskNum; /*0x05 */
2039 U16 Reserved1; /*0x06 */
2040 U32 Reserved2; /*0x08 */
2041 MPI2_RAIDPHYSDISK1_PATH
2042 PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */
2043 } MPI2_CONFIG_PAGE_RD_PDISK_1,
2044 *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
2045 Mpi2RaidPhysDiskPage1_t,
2046 *pMpi2RaidPhysDiskPage1_t;
2047
2048 #define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02)
2049
2050
2051 /****************************************************************************
2052 * values for fields used by several types of SAS Config Pages
2053 ****************************************************************************/
2054
2055 /*values for NegotiatedLinkRates fields */
2056 #define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0)
2057 #define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4)
2058 #define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
2059 /*link rates used for Negotiated Physical and Logical Link Rate */
2060 #define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
2061 #define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
2062 #define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
2063 #define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
2064 #define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
2065 #define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
2066 #define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
2067 #define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08)
2068 #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
2069 #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
2070 #define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B)
2071 #define MPI26_SAS_NEG_LINK_RATE_22_5 (0x0C)
2072
2073
2074 /*values for AttachedPhyInfo fields */
2075 #define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
2076 #define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
2077 #define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
2078
2079 #define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F)
2080 #define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
2081 #define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
2082 #define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
2083 #define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
2084 #define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
2085 #define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
2086 #define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
2087 #define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
2088 #define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
2089
2090
2091 /*values for PhyInfo fields */
2092 #define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
2093
2094 #define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
2095 #define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27)
2096 #define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
2097 #define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
2098 #define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
2099
2100 #define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
2101 #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
2102 #define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
2103 #define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000)
2104 #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000)
2105 #define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000)
2106
2107 #define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000)
2108 #define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
2109 #define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
2110 #define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
2111 #define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
2112 #define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
2113 #define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
2114 #define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
2115 #define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
2116 #define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
2117
2118 #define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000)
2119 #define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
2120 #define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
2121 #define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
2122
2123 #define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00)
2124 #define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8)
2125
2126 #define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0)
2127 #define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000)
2128 #define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010)
2129 #define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020)
2130
2131
2132 /*values for SAS ProgrammedLinkRate fields */
2133 #define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0)
2134 #define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
2135 #define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
2136 #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
2137 #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
2138 #define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
2139 #define MPI26_SAS_PRATE_MAX_RATE_22_5 (0xC0)
2140 #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
2141 #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
2142 #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
2143 #define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
2144 #define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
2145 #define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B)
2146 #define MPI26_SAS_PRATE_MIN_RATE_22_5 (0x0C)
2147
2148
2149 /*values for SAS HwLinkRate fields */
2150 #define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0)
2151 #define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
2152 #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
2153 #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
2154 #define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
2155 #define MPI26_SAS_HWRATE_MAX_RATE_22_5 (0xC0)
2156 #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
2157 #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
2158 #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
2159 #define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
2160 #define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B)
2161 #define MPI26_SAS_HWRATE_MIN_RATE_22_5 (0x0C)
2162
2163
2164
2165 /****************************************************************************
2166 * SAS IO Unit Config Pages
2167 ****************************************************************************/
2168
2169 /*SAS IO Unit Page 0 */
2170
2171 typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA {
2172 U8 Port; /*0x00 */
2173 U8 PortFlags; /*0x01 */
2174 U8 PhyFlags; /*0x02 */
2175 U8 NegotiatedLinkRate; /*0x03 */
2176 U32 ControllerPhyDeviceInfo;/*0x04 */
2177 U16 AttachedDevHandle; /*0x08 */
2178 U16 ControllerDevHandle; /*0x0A */
2179 U32 DiscoveryStatus; /*0x0C */
2180 U32 Reserved; /*0x10 */
2181 } MPI2_SAS_IO_UNIT0_PHY_DATA,
2182 *PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
2183 Mpi2SasIOUnit0PhyData_t,
2184 *pMpi2SasIOUnit0PhyData_t;
2185
2186 /*
2187 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2188 *one and check the value returned for NumPhys at runtime.
2189 */
2190 #ifndef MPI2_SAS_IOUNIT0_PHY_MAX
2191 #define MPI2_SAS_IOUNIT0_PHY_MAX (1)
2192 #endif
2193
2194 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 {
2195 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2196 U32 Reserved1;/*0x08 */
2197 U8 NumPhys; /*0x0C */
2198 U8 Reserved2;/*0x0D */
2199 U16 Reserved3;/*0x0E */
2200 MPI2_SAS_IO_UNIT0_PHY_DATA
2201 PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */
2202 } MPI2_CONFIG_PAGE_SASIOUNIT_0,
2203 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
2204 Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t;
2205
2206 #define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05)
2207
2208 /*values for SAS IO Unit Page 0 PortFlags */
2209 #define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08)
2210 #define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
2211
2212 /*values for SAS IO Unit Page 0 PhyFlags */
2213 #define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
2214 #define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
2215 #define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10)
2216 #define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
2217
2218 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
2219
2220 /*see mpi2_sas.h for values for
2221 *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
2222
2223 /*values for SAS IO Unit Page 0 DiscoveryStatus */
2224 #define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
2225 #define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
2226 #define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000)
2227 #define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
2228 #define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000)
2229 #define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
2230 #define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
2231 #define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000)
2232 #define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
2233 #define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
2234 #define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400)
2235 #define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
2236 #define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100)
2237 #define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080)
2238 #define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040)
2239 #define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020)
2240 #define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010)
2241 #define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004)
2242 #define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002)
2243 #define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001)
2244
2245
2246 /*SAS IO Unit Page 1 */
2247
2248 typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA {
2249 U8 Port; /*0x00 */
2250 U8 PortFlags; /*0x01 */
2251 U8 PhyFlags; /*0x02 */
2252 U8 MaxMinLinkRate; /*0x03 */
2253 U32 ControllerPhyDeviceInfo; /*0x04 */
2254 U16 MaxTargetPortConnectTime; /*0x08 */
2255 U16 Reserved1; /*0x0A */
2256 } MPI2_SAS_IO_UNIT1_PHY_DATA,
2257 *PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
2258 Mpi2SasIOUnit1PhyData_t,
2259 *pMpi2SasIOUnit1PhyData_t;
2260
2261 /*
2262 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2263 *one and check the value returned for NumPhys at runtime.
2264 */
2265 #ifndef MPI2_SAS_IOUNIT1_PHY_MAX
2266 #define MPI2_SAS_IOUNIT1_PHY_MAX (1)
2267 #endif
2268
2269 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
2270 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2271 U16
2272 ControlFlags; /*0x08 */
2273 U16
2274 SASNarrowMaxQueueDepth; /*0x0A */
2275 U16
2276 AdditionalControlFlags; /*0x0C */
2277 U16
2278 SASWideMaxQueueDepth; /*0x0E */
2279 U8
2280 NumPhys; /*0x10 */
2281 U8
2282 SATAMaxQDepth; /*0x11 */
2283 U8
2284 ReportDeviceMissingDelay; /*0x12 */
2285 U8
2286 IODeviceMissingDelay; /*0x13 */
2287 MPI2_SAS_IO_UNIT1_PHY_DATA
2288 PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */
2289 } MPI2_CONFIG_PAGE_SASIOUNIT_1,
2290 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
2291 Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t;
2292
2293 #define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09)
2294
2295 /*values for SAS IO Unit Page 1 ControlFlags */
2296 #define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
2297 #define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
2298 #define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
2299 #define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
2300
2301 #define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
2302 #define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
2303 #define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0)
2304 #define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1)
2305 #define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2)
2306
2307 #define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
2308 #define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
2309 #define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
2310 #define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
2311 #define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
2312 #define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
2313 #define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
2314 #define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
2315
2316 /*values for SAS IO Unit Page 1 AdditionalControlFlags */
2317 #define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100)
2318 #define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
2319 #define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
2320 #define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
2321 #define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
2322 #define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
2323 #define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
2324 #define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
2325 #define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
2326
2327 /*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
2328 #define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
2329 #define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80)
2330
2331 /*values for SAS IO Unit Page 1 PortFlags */
2332 #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
2333
2334 /*values for SAS IO Unit Page 1 PhyFlags */
2335 #define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
2336 #define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
2337 #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
2338 #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
2339
2340 /*values for SAS IO Unit Page 1 MaxMinLinkRate */
2341 #define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
2342 #define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
2343 #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
2344 #define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
2345 #define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0)
2346 #define MPI26_SASIOUNIT1_MAX_RATE_22_5 (0xC0)
2347 #define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
2348 #define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
2349 #define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
2350 #define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
2351 #define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B)
2352 #define MPI26_SASIOUNIT1_MIN_RATE_22_5 (0x0C)
2353
2354 /*see mpi2_sas.h for values for
2355 *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
2356
2357
2358 /*SAS IO Unit Page 4 (for MPI v2.5 and earlier) */
2359
2360 typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP {
2361 U8 MaxTargetSpinup; /*0x00 */
2362 U8 SpinupDelay; /*0x01 */
2363 U8 SpinupFlags; /*0x02 */
2364 U8 Reserved1; /*0x03 */
2365 } MPI2_SAS_IOUNIT4_SPINUP_GROUP,
2366 *PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
2367 Mpi2SasIOUnit4SpinupGroup_t,
2368 *pMpi2SasIOUnit4SpinupGroup_t;
2369 /*defines for SAS IO Unit Page 4 SpinupFlags */
2370 #define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01)
2371
2372
2373 /*
2374 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2375 *one and check the value returned for NumPhys at runtime.
2376 */
2377 #ifndef MPI2_SAS_IOUNIT4_PHY_MAX
2378 #define MPI2_SAS_IOUNIT4_PHY_MAX (4)
2379 #endif
2380
2381 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 {
2382 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;/*0x00 */
2383 MPI2_SAS_IOUNIT4_SPINUP_GROUP
2384 SpinupGroupParameters[4]; /*0x08 */
2385 U32
2386 Reserved1; /*0x18 */
2387 U32
2388 Reserved2; /*0x1C */
2389 U32
2390 Reserved3; /*0x20 */
2391 U8
2392 BootDeviceWaitTime; /*0x24 */
2393 U8
2394 SATADeviceWaitTime; /*0x25 */
2395 U16
2396 Reserved5; /*0x26 */
2397 U8
2398 NumPhys; /*0x28 */
2399 U8
2400 PEInitialSpinupDelay; /*0x29 */
2401 U8
2402 PEReplyDelay; /*0x2A */
2403 U8
2404 Flags; /*0x2B */
2405 U8
2406 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /*0x2C */
2407 } MPI2_CONFIG_PAGE_SASIOUNIT_4,
2408 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
2409 Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t;
2410
2411 #define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02)
2412
2413 /*defines for Flags field */
2414 #define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01)
2415
2416 /*defines for PHY field */
2417 #define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
2418
2419
2420 /*SAS IO Unit Page 5 */
2421
2422 typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
2423 U8 ControlFlags; /*0x00 */
2424 U8 PortWidthModGroup; /*0x01 */
2425 U16 InactivityTimerExponent; /*0x02 */
2426 U8 SATAPartialTimeout; /*0x04 */
2427 U8 Reserved2; /*0x05 */
2428 U8 SATASlumberTimeout; /*0x06 */
2429 U8 Reserved3; /*0x07 */
2430 U8 SASPartialTimeout; /*0x08 */
2431 U8 Reserved4; /*0x09 */
2432 U8 SASSlumberTimeout; /*0x0A */
2433 U8 Reserved5; /*0x0B */
2434 } MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
2435 *PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
2436 Mpi2SasIOUnit5PhyPmSettings_t,
2437 *pMpi2SasIOUnit5PhyPmSettings_t;
2438
2439 /*defines for ControlFlags field */
2440 #define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
2441 #define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
2442 #define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
2443 #define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
2444
2445 /*defines for PortWidthModeGroup field */
2446 #define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
2447
2448 /*defines for InactivityTimerExponent field */
2449 #define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
2450 #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
2451 #define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
2452 #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
2453 #define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
2454 #define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
2455 #define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
2456 #define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
2457
2458 #define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
2459 #define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
2460 #define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
2461 #define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
2462 #define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
2463 #define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
2464 #define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
2465 #define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
2466
2467 /*
2468 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2469 *one and check the value returned for NumPhys at runtime.
2470 */
2471 #ifndef MPI2_SAS_IOUNIT5_PHY_MAX
2472 #define MPI2_SAS_IOUNIT5_PHY_MAX (1)
2473 #endif
2474
2475 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
2476 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2477 U8 NumPhys; /*0x08 */
2478 U8 Reserved1;/*0x09 */
2479 U16 Reserved2;/*0x0A */
2480 U32 Reserved3;/*0x0C */
2481 MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS
2482 SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */
2483 } MPI2_CONFIG_PAGE_SASIOUNIT_5,
2484 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
2485 Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t;
2486
2487 #define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
2488
2489
2490 /*SAS IO Unit Page 6 */
2491
2492 typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
2493 U8 CurrentStatus; /*0x00 */
2494 U8 CurrentModulation; /*0x01 */
2495 U8 CurrentUtilization; /*0x02 */
2496 U8 Reserved1; /*0x03 */
2497 U32 Reserved2; /*0x04 */
2498 } MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
2499 *PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
2500 Mpi2SasIOUnit6PortWidthModGroupStatus_t,
2501 *pMpi2SasIOUnit6PortWidthModGroupStatus_t;
2502
2503 /*defines for CurrentStatus field */
2504 #define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
2505 #define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
2506 #define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
2507 #define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
2508 #define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
2509 #define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
2510 #define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
2511 #define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
2512
2513 /*defines for CurrentModulation field */
2514 #define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
2515 #define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
2516 #define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
2517 #define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
2518
2519 /*
2520 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2521 *one and check the value returned for NumGroups at runtime.
2522 */
2523 #ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
2524 #define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
2525 #endif
2526
2527 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
2528 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2529 U32 Reserved1; /*0x08 */
2530 U32 Reserved2; /*0x0C */
2531 U8 NumGroups; /*0x10 */
2532 U8 Reserved3; /*0x11 */
2533 U16 Reserved4; /*0x12 */
2534 MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
2535 PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */
2536 } MPI2_CONFIG_PAGE_SASIOUNIT_6,
2537 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
2538 Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t;
2539
2540 #define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
2541
2542
2543 /*SAS IO Unit Page 7 */
2544
2545 typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
2546 U8 Flags; /*0x00 */
2547 U8 Reserved1; /*0x01 */
2548 U16 Reserved2; /*0x02 */
2549 U8 Threshold75Pct; /*0x04 */
2550 U8 Threshold50Pct; /*0x05 */
2551 U8 Threshold25Pct; /*0x06 */
2552 U8 Reserved3; /*0x07 */
2553 } MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
2554 *PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
2555 Mpi2SasIOUnit7PortWidthModGroupSettings_t,
2556 *pMpi2SasIOUnit7PortWidthModGroupSettings_t;
2557
2558 /*defines for Flags field */
2559 #define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
2560
2561
2562 /*
2563 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2564 *one and check the value returned for NumGroups at runtime.
2565 */
2566 #ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
2567 #define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
2568 #endif
2569
2570 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
2571 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2572 U8 SamplingInterval; /*0x08 */
2573 U8 WindowLength; /*0x09 */
2574 U16 Reserved1; /*0x0A */
2575 U32 Reserved2; /*0x0C */
2576 U32 Reserved3; /*0x10 */
2577 U8 NumGroups; /*0x14 */
2578 U8 Reserved4; /*0x15 */
2579 U16 Reserved5; /*0x16 */
2580 MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
2581 PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */
2582 } MPI2_CONFIG_PAGE_SASIOUNIT_7,
2583 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
2584 Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t;
2585
2586 #define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
2587
2588
2589 /*SAS IO Unit Page 8 */
2590
2591 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
2592 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2593 Header; /*0x00 */
2594 U32
2595 Reserved1; /*0x08 */
2596 U32
2597 PowerManagementCapabilities; /*0x0C */
2598 U8
2599 TxRxSleepStatus; /*0x10 */
2600 U8
2601 Reserved2; /*0x11 */
2602 U16
2603 Reserved3; /*0x12 */
2604 } MPI2_CONFIG_PAGE_SASIOUNIT_8,
2605 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
2606 Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t;
2607
2608 #define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
2609
2610 /*defines for PowerManagementCapabilities field */
2611 #define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000)
2612 #define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
2613 #define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
2614 #define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
2615 #define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
2616 #define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010)
2617 #define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
2618 #define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
2619 #define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
2620 #define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
2621
2622 /*defines for TxRxSleepStatus field */
2623 #define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00)
2624 #define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01)
2625 #define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02)
2626 #define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03)
2627
2628
2629
2630 /*SAS IO Unit Page 16 */
2631
2632 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
2633 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2634 Header; /*0x00 */
2635 U64
2636 TimeStamp; /*0x08 */
2637 U32
2638 Reserved1; /*0x10 */
2639 U32
2640 Reserved2; /*0x14 */
2641 U32
2642 FastPathPendedRequests; /*0x18 */
2643 U32
2644 FastPathUnPendedRequests; /*0x1C */
2645 U32
2646 FastPathHostRequestStarts; /*0x20 */
2647 U32
2648 FastPathFirmwareRequestStarts; /*0x24 */
2649 U32
2650 FastPathHostCompletions; /*0x28 */
2651 U32
2652 FastPathFirmwareCompletions; /*0x2C */
2653 U32
2654 NonFastPathRequestStarts; /*0x30 */
2655 U32
2656 NonFastPathHostCompletions; /*0x30 */
2657 } MPI2_CONFIG_PAGE_SASIOUNIT16,
2658 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
2659 Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t;
2660
2661 #define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00)
2662
2663
2664 /****************************************************************************
2665 * SAS Expander Config Pages
2666 ****************************************************************************/
2667
2668 /*SAS Expander Page 0 */
2669
2670 typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 {
2671 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2672 Header; /*0x00 */
2673 U8
2674 PhysicalPort; /*0x08 */
2675 U8
2676 ReportGenLength; /*0x09 */
2677 U16
2678 EnclosureHandle; /*0x0A */
2679 U64
2680 SASAddress; /*0x0C */
2681 U32
2682 DiscoveryStatus; /*0x14 */
2683 U16
2684 DevHandle; /*0x18 */
2685 U16
2686 ParentDevHandle; /*0x1A */
2687 U16
2688 ExpanderChangeCount; /*0x1C */
2689 U16
2690 ExpanderRouteIndexes; /*0x1E */
2691 U8
2692 NumPhys; /*0x20 */
2693 U8
2694 SASLevel; /*0x21 */
2695 U16
2696 Flags; /*0x22 */
2697 U16
2698 STPBusInactivityTimeLimit; /*0x24 */
2699 U16
2700 STPMaxConnectTimeLimit; /*0x26 */
2701 U16
2702 STP_SMP_NexusLossTime; /*0x28 */
2703 U16
2704 MaxNumRoutedSasAddresses; /*0x2A */
2705 U64
2706 ActiveZoneManagerSASAddress;/*0x2C */
2707 U16
2708 ZoneLockInactivityLimit; /*0x34 */
2709 U16
2710 Reserved1; /*0x36 */
2711 U8
2712 TimeToReducedFunc; /*0x38 */
2713 U8
2714 InitialTimeToReducedFunc; /*0x39 */
2715 U8
2716 MaxReducedFuncTime; /*0x3A */
2717 U8
2718 Reserved2; /*0x3B */
2719 } MPI2_CONFIG_PAGE_EXPANDER_0,
2720 *PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
2721 Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t;
2722
2723 #define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
2724
2725 /*values for SAS Expander Page 0 DiscoveryStatus field */
2726 #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
2727 #define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
2728 #define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000)
2729 #define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
2730 #define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000)
2731 #define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
2732 #define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
2733 #define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000)
2734 #define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
2735 #define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800)
2736 #define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400)
2737 #define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200)
2738 #define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100)
2739 #define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080)
2740 #define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040)
2741 #define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020)
2742 #define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010)
2743 #define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004)
2744 #define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002)
2745 #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
2746
2747 /*values for SAS Expander Page 0 Flags field */
2748 #define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
2749 #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
2750 #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
2751 #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
2752 #define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
2753 #define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
2754 #define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
2755 #define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
2756 #define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
2757 #define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
2758 #define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
2759
2760
2761 /*SAS Expander Page 1 */
2762
2763 typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 {
2764 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2765 Header; /*0x00 */
2766 U8
2767 PhysicalPort; /*0x08 */
2768 U8
2769 Reserved1; /*0x09 */
2770 U16
2771 Reserved2; /*0x0A */
2772 U8
2773 NumPhys; /*0x0C */
2774 U8
2775 Phy; /*0x0D */
2776 U16
2777 NumTableEntriesProgrammed; /*0x0E */
2778 U8
2779 ProgrammedLinkRate; /*0x10 */
2780 U8
2781 HwLinkRate; /*0x11 */
2782 U16
2783 AttachedDevHandle; /*0x12 */
2784 U32
2785 PhyInfo; /*0x14 */
2786 U32
2787 AttachedDeviceInfo; /*0x18 */
2788 U16
2789 ExpanderDevHandle; /*0x1C */
2790 U8
2791 ChangeCount; /*0x1E */
2792 U8
2793 NegotiatedLinkRate; /*0x1F */
2794 U8
2795 PhyIdentifier; /*0x20 */
2796 U8
2797 AttachedPhyIdentifier; /*0x21 */
2798 U8
2799 Reserved3; /*0x22 */
2800 U8
2801 DiscoveryInfo; /*0x23 */
2802 U32
2803 AttachedPhyInfo; /*0x24 */
2804 U8
2805 ZoneGroup; /*0x28 */
2806 U8
2807 SelfConfigStatus; /*0x29 */
2808 U16
2809 Reserved4; /*0x2A */
2810 } MPI2_CONFIG_PAGE_EXPANDER_1,
2811 *PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
2812 Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t;
2813
2814 #define MPI2_SASEXPANDER1_PAGEVERSION (0x02)
2815
2816 /*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
2817
2818 /*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
2819
2820 /*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
2821
2822 /*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines
2823 *used for the AttachedDeviceInfo field */
2824
2825 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
2826
2827 /*values for SAS Expander Page 1 DiscoveryInfo field */
2828 #define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
2829 #define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
2830 #define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
2831
2832 /*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
2833
2834
2835 /****************************************************************************
2836 * SAS Device Config Pages
2837 ****************************************************************************/
2838
2839 /*SAS Device Page 0 */
2840
2841 typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
2842 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2843 Header; /*0x00 */
2844 U16
2845 Slot; /*0x08 */
2846 U16
2847 EnclosureHandle; /*0x0A */
2848 U64
2849 SASAddress; /*0x0C */
2850 U16
2851 ParentDevHandle; /*0x14 */
2852 U8
2853 PhyNum; /*0x16 */
2854 U8
2855 AccessStatus; /*0x17 */
2856 U16
2857 DevHandle; /*0x18 */
2858 U8
2859 AttachedPhyIdentifier; /*0x1A */
2860 U8
2861 ZoneGroup; /*0x1B */
2862 U32
2863 DeviceInfo; /*0x1C */
2864 U16
2865 Flags; /*0x20 */
2866 U8
2867 PhysicalPort; /*0x22 */
2868 U8
2869 MaxPortConnections; /*0x23 */
2870 U64
2871 DeviceName; /*0x24 */
2872 U8
2873 PortGroups; /*0x2C */
2874 U8
2875 DmaGroup; /*0x2D */
2876 U8
2877 ControlGroup; /*0x2E */
2878 U8
2879 EnclosureLevel; /*0x2F */
2880 U32
2881 ConnectorName[4]; /*0x30 */
2882 U32
2883 Reserved3; /*0x34 */
2884 } MPI2_CONFIG_PAGE_SAS_DEV_0,
2885 *PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
2886 Mpi2SasDevicePage0_t,
2887 *pMpi2SasDevicePage0_t;
2888
2889 #define MPI2_SASDEVICE0_PAGEVERSION (0x09)
2890
2891 /*values for SAS Device Page 0 AccessStatus field */
2892 #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
2893 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
2894 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
2895 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
2896 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
2897 #define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05)
2898 #define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06)
2899 #define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07)
2900 /*specific values for SATA Init failures */
2901 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
2902 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
2903 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
2904 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
2905 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
2906 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
2907 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
2908 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
2909 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
2910 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
2911 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
2912
2913 /*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
2914
2915 /*values for SAS Device Page 0 Flags field */
2916 #define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
2917 #define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000)
2918 #define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000)
2919 #define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
2920 #define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
2921 #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
2922 #define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
2923 #define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
2924 #define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
2925 #define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
2926 #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
2927 #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
2928 #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
2929 #define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE (0x0004)
2930 #define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002)
2931 #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
2932
2933
2934 /*SAS Device Page 1 */
2935
2936 typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 {
2937 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2938 Header; /*0x00 */
2939 U32
2940 Reserved1; /*0x08 */
2941 U64
2942 SASAddress; /*0x0C */
2943 U32
2944 Reserved2; /*0x14 */
2945 U16
2946 DevHandle; /*0x18 */
2947 U16
2948 Reserved3; /*0x1A */
2949 U8
2950 InitialRegDeviceFIS[20];/*0x1C */
2951 } MPI2_CONFIG_PAGE_SAS_DEV_1,
2952 *PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
2953 Mpi2SasDevicePage1_t,
2954 *pMpi2SasDevicePage1_t;
2955
2956 #define MPI2_SASDEVICE1_PAGEVERSION (0x01)
2957
2958
2959 /****************************************************************************
2960 * SAS PHY Config Pages
2961 ****************************************************************************/
2962
2963 /*SAS PHY Page 0 */
2964
2965 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 {
2966 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2967 Header; /*0x00 */
2968 U16
2969 OwnerDevHandle; /*0x08 */
2970 U16
2971 Reserved1; /*0x0A */
2972 U16
2973 AttachedDevHandle; /*0x0C */
2974 U8
2975 AttachedPhyIdentifier; /*0x0E */
2976 U8
2977 Reserved2; /*0x0F */
2978 U32
2979 AttachedPhyInfo; /*0x10 */
2980 U8
2981 ProgrammedLinkRate; /*0x14 */
2982 U8
2983 HwLinkRate; /*0x15 */
2984 U8
2985 ChangeCount; /*0x16 */
2986 U8
2987 Flags; /*0x17 */
2988 U32
2989 PhyInfo; /*0x18 */
2990 U8
2991 NegotiatedLinkRate; /*0x1C */
2992 U8
2993 Reserved3; /*0x1D */
2994 U16
2995 Reserved4; /*0x1E */
2996 } MPI2_CONFIG_PAGE_SAS_PHY_0,
2997 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
2998 Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t;
2999
3000 #define MPI2_SASPHY0_PAGEVERSION (0x03)
3001
3002 /*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
3003
3004 /*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
3005
3006 /*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
3007
3008 /*values for SAS PHY Page 0 Flags field */
3009 #define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
3010
3011 /*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
3012
3013 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
3014
3015
3016 /*SAS PHY Page 1 */
3017
3018 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 {
3019 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3020 Header; /*0x00 */
3021 U32
3022 Reserved1; /*0x08 */
3023 U32
3024 InvalidDwordCount; /*0x0C */
3025 U32
3026 RunningDisparityErrorCount; /*0x10 */
3027 U32
3028 LossDwordSynchCount; /*0x14 */
3029 U32
3030 PhyResetProblemCount; /*0x18 */
3031 } MPI2_CONFIG_PAGE_SAS_PHY_1,
3032 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
3033 Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t;
3034
3035 #define MPI2_SASPHY1_PAGEVERSION (0x01)
3036
3037
3038 /*SAS PHY Page 2 */
3039
3040 typedef struct _MPI2_SASPHY2_PHY_EVENT {
3041 U8 PhyEventCode; /*0x00 */
3042 U8 Reserved1; /*0x01 */
3043 U16 Reserved2; /*0x02 */
3044 U32 PhyEventInfo; /*0x04 */
3045 } MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT,
3046 Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t;
3047
3048 /*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
3049
3050
3051 /*
3052 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3053 *one and check the value returned for NumPhyEvents at runtime.
3054 */
3055 #ifndef MPI2_SASPHY2_PHY_EVENT_MAX
3056 #define MPI2_SASPHY2_PHY_EVENT_MAX (1)
3057 #endif
3058
3059 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
3060 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3061 Header; /*0x00 */
3062 U32
3063 Reserved1; /*0x08 */
3064 U8
3065 NumPhyEvents; /*0x0C */
3066 U8
3067 Reserved2; /*0x0D */
3068 U16
3069 Reserved3; /*0x0E */
3070 MPI2_SASPHY2_PHY_EVENT
3071 PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */
3072 } MPI2_CONFIG_PAGE_SAS_PHY_2,
3073 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
3074 Mpi2SasPhyPage2_t,
3075 *pMpi2SasPhyPage2_t;
3076
3077 #define MPI2_SASPHY2_PAGEVERSION (0x00)
3078
3079
3080 /*SAS PHY Page 3 */
3081
3082 typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
3083 U8 PhyEventCode; /*0x00 */
3084 U8 Reserved1; /*0x01 */
3085 U16 Reserved2; /*0x02 */
3086 U8 CounterType; /*0x04 */
3087 U8 ThresholdWindow; /*0x05 */
3088 U8 TimeUnits; /*0x06 */
3089 U8 Reserved3; /*0x07 */
3090 U32 EventThreshold; /*0x08 */
3091 U16 ThresholdFlags; /*0x0C */
3092 U16 Reserved4; /*0x0E */
3093 } MPI2_SASPHY3_PHY_EVENT_CONFIG,
3094 *PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
3095 Mpi2SasPhy3PhyEventConfig_t,
3096 *pMpi2SasPhy3PhyEventConfig_t;
3097
3098 /*values for PhyEventCode field */
3099 #define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
3100 #define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
3101 #define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
3102 #define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
3103 #define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
3104 #define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
3105 #define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
3106 #define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
3107 #define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
3108 #define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
3109 #define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
3110 #define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
3111 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
3112 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
3113 #define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
3114 #define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
3115 #define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
3116 #define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
3117 #define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
3118 #define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
3119 #define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
3120 #define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
3121 #define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
3122 #define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
3123 #define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
3124 #define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
3125 #define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
3126 #define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
3127 #define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
3128 #define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
3129 #define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
3130 #define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
3131 #define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
3132 #define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
3133 #define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
3134 #define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
3135 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
3136
3137 /*Following codes are product specific and in MPI v2.6 and later */
3138 #define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3)
3139 #define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4)
3140 #define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5)
3141 #define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6)
3142 #define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7)
3143 #define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8)
3144 #define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9)
3145 #define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA)
3146 #define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB)
3147 #define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC)
3148
3149
3150 /*values for the CounterType field */
3151 #define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
3152 #define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
3153 #define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
3154
3155 /*values for the TimeUnits field */
3156 #define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
3157 #define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
3158 #define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
3159 #define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
3160
3161 /*values for the ThresholdFlags field */
3162 #define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
3163 #define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
3164
3165 /*
3166 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3167 *one and check the value returned for NumPhyEvents at runtime.
3168 */
3169 #ifndef MPI2_SASPHY3_PHY_EVENT_MAX
3170 #define MPI2_SASPHY3_PHY_EVENT_MAX (1)
3171 #endif
3172
3173 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
3174 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3175 Header; /*0x00 */
3176 U32
3177 Reserved1; /*0x08 */
3178 U8
3179 NumPhyEvents; /*0x0C */
3180 U8
3181 Reserved2; /*0x0D */
3182 U16
3183 Reserved3; /*0x0E */
3184 MPI2_SASPHY3_PHY_EVENT_CONFIG
3185 PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */
3186 } MPI2_CONFIG_PAGE_SAS_PHY_3,
3187 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
3188 Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t;
3189
3190 #define MPI2_SASPHY3_PAGEVERSION (0x00)
3191
3192
3193 /*SAS PHY Page 4 */
3194
3195 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
3196 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3197 Header; /*0x00 */
3198 U16
3199 Reserved1; /*0x08 */
3200 U8
3201 Reserved2; /*0x0A */
3202 U8
3203 Flags; /*0x0B */
3204 U8
3205 InitialFrame[28]; /*0x0C */
3206 } MPI2_CONFIG_PAGE_SAS_PHY_4,
3207 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
3208 Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t;
3209
3210 #define MPI2_SASPHY4_PAGEVERSION (0x00)
3211
3212 /*values for the Flags field */
3213 #define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02)
3214 #define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01)
3215
3216
3217
3218
3219 /****************************************************************************
3220 * SAS Port Config Pages
3221 ****************************************************************************/
3222
3223 /*SAS Port Page 0 */
3224
3225 typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 {
3226 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3227 Header; /*0x00 */
3228 U8
3229 PortNumber; /*0x08 */
3230 U8
3231 PhysicalPort; /*0x09 */
3232 U8
3233 PortWidth; /*0x0A */
3234 U8
3235 PhysicalPortWidth; /*0x0B */
3236 U8
3237 ZoneGroup; /*0x0C */
3238 U8
3239 Reserved1; /*0x0D */
3240 U16
3241 Reserved2; /*0x0E */
3242 U64
3243 SASAddress; /*0x10 */
3244 U32
3245 DeviceInfo; /*0x18 */
3246 U32
3247 Reserved3; /*0x1C */
3248 U32
3249 Reserved4; /*0x20 */
3250 } MPI2_CONFIG_PAGE_SAS_PORT_0,
3251 *PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
3252 Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t;
3253
3254 #define MPI2_SASPORT0_PAGEVERSION (0x00)
3255
3256 /*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
3257
3258
3259 /****************************************************************************
3260 * SAS Enclosure Config Pages
3261 ****************************************************************************/
3262
3263 /*SAS Enclosure Page 0 */
3264
3265 typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
3266 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3267 U32 Reserved1; /*0x08 */
3268 U64 EnclosureLogicalID; /*0x0C */
3269 U16 Flags; /*0x14 */
3270 U16 EnclosureHandle; /*0x16 */
3271 U16 NumSlots; /*0x18 */
3272 U16 StartSlot; /*0x1A */
3273 U8 ChassisSlot; /*0x1C */
3274 U8 EnclosureLeve; /*0x1D */
3275 U16 SEPDevHandle; /*0x1E */
3276 U32 Reserved3; /*0x20 */
3277 U32 Reserved4; /*0x24 */
3278 } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
3279 *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
3280 Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
3281 MPI26_CONFIG_PAGE_ENCLOSURE_0,
3282 *PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0,
3283 Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t;
3284
3285 #define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
3286
3287 /*values for SAS Enclosure Page 0 Flags field */
3288 #define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
3289 #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
3290 #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
3291 #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
3292 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
3293 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
3294 #define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
3295 #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
3296 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
3297
3298 #define MPI26_ENCLOSURE0_PAGEVERSION (0x04)
3299
3300 /*Values for Enclosure Page 0 Flags field */
3301 #define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
3302 #define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
3303 #define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F)
3304 #define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
3305 #define MPI26_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
3306 #define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
3307 #define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
3308 #define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
3309 #define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
3310
3311 /****************************************************************************
3312 * Log Config Page
3313 ****************************************************************************/
3314
3315 /*Log Page 0 */
3316
3317 /*
3318 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3319 *one and check the value returned for NumLogEntries at runtime.
3320 */
3321 #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
3322 #define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
3323 #endif
3324
3325 #define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C)
3326
3327 typedef struct _MPI2_LOG_0_ENTRY {
3328 U64 TimeStamp; /*0x00 */
3329 U32 Reserved1; /*0x08 */
3330 U16 LogSequence; /*0x0C */
3331 U16 LogEntryQualifier; /*0x0E */
3332 U8 VP_ID; /*0x10 */
3333 U8 VF_ID; /*0x11 */
3334 U16 Reserved2; /*0x12 */
3335 U8
3336 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */
3337 } MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY,
3338 Mpi2Log0Entry_t, *pMpi2Log0Entry_t;
3339
3340 /*values for Log Page 0 LogEntry LogEntryQualifier field */
3341 #define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000)
3342 #define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001)
3343 #define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002)
3344 #define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000)
3345 #define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF)
3346
3347 typedef struct _MPI2_CONFIG_PAGE_LOG_0 {
3348 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3349 U32 Reserved1; /*0x08 */
3350 U32 Reserved2; /*0x0C */
3351 U16 NumLogEntries;/*0x10 */
3352 U16 Reserved3; /*0x12 */
3353 MPI2_LOG_0_ENTRY
3354 LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */
3355 } MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0,
3356 Mpi2LogPage0_t, *pMpi2LogPage0_t;
3357
3358 #define MPI2_LOG_0_PAGEVERSION (0x02)
3359
3360
3361 /****************************************************************************
3362 * RAID Config Page
3363 ****************************************************************************/
3364
3365 /*RAID Page 0 */
3366
3367 /*
3368 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3369 *one and check the value returned for NumElements at runtime.
3370 */
3371 #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
3372 #define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
3373 #endif
3374
3375 typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT {
3376 U16 ElementFlags; /*0x00 */
3377 U16 VolDevHandle; /*0x02 */
3378 U8 HotSparePool; /*0x04 */
3379 U8 PhysDiskNum; /*0x05 */
3380 U16 PhysDiskDevHandle; /*0x06 */
3381 } MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
3382 *PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
3383 Mpi2RaidConfig0ConfigElement_t,
3384 *pMpi2RaidConfig0ConfigElement_t;
3385
3386 /*values for the ElementFlags field */
3387 #define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F)
3388 #define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000)
3389 #define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001)
3390 #define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002)
3391 #define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003)
3392
3393
3394 typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 {
3395 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3396 U8 NumHotSpares; /*0x08 */
3397 U8 NumPhysDisks; /*0x09 */
3398 U8 NumVolumes; /*0x0A */
3399 U8 ConfigNum; /*0x0B */
3400 U32 Flags; /*0x0C */
3401 U8 ConfigGUID[24]; /*0x10 */
3402 U32 Reserved1; /*0x28 */
3403 U8 NumElements; /*0x2C */
3404 U8 Reserved2; /*0x2D */
3405 U16 Reserved3; /*0x2E */
3406 MPI2_RAIDCONFIG0_CONFIG_ELEMENT
3407 ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */
3408 } MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
3409 *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
3410 Mpi2RaidConfigurationPage0_t,
3411 *pMpi2RaidConfigurationPage0_t;
3412
3413 #define MPI2_RAIDCONFIG0_PAGEVERSION (0x00)
3414
3415 /*values for RAID Configuration Page 0 Flags field */
3416 #define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001)
3417
3418
3419 /****************************************************************************
3420 * Driver Persistent Mapping Config Pages
3421 ****************************************************************************/
3422
3423 /*Driver Persistent Mapping Page 0 */
3424
3425 typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY {
3426 U64 PhysicalIdentifier; /*0x00 */
3427 U16 MappingInformation; /*0x08 */
3428 U16 DeviceIndex; /*0x0A */
3429 U32 PhysicalBitsMapping; /*0x0C */
3430 U32 Reserved1; /*0x10 */
3431 } MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
3432 *PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
3433 Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t;
3434
3435 typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 {
3436 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3437 MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /*0x08 */
3438 } MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
3439 *PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
3440 Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t;
3441
3442 #define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00)
3443
3444 /*values for Driver Persistent Mapping Page 0 MappingInformation field */
3445 #define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0)
3446 #define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4)
3447 #define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
3448
3449
3450 /****************************************************************************
3451 * Ethernet Config Pages
3452 ****************************************************************************/
3453
3454 /*Ethernet Page 0 */
3455
3456 /*IP address (union of IPv4 and IPv6) */
3457 typedef union _MPI2_ETHERNET_IP_ADDR {
3458 U32 IPv4Addr;
3459 U32 IPv6Addr[4];
3460 } MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR,
3461 Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t;
3462
3463 #define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
3464
3465 typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
3466 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3467 U8 NumInterfaces; /*0x08 */
3468 U8 Reserved0; /*0x09 */
3469 U16 Reserved1; /*0x0A */
3470 U32 Status; /*0x0C */
3471 U8 MediaState; /*0x10 */
3472 U8 Reserved2; /*0x11 */
3473 U16 Reserved3; /*0x12 */
3474 U8 MacAddress[6]; /*0x14 */
3475 U8 Reserved4; /*0x1A */
3476 U8 Reserved5; /*0x1B */
3477 MPI2_ETHERNET_IP_ADDR IpAddress; /*0x1C */
3478 MPI2_ETHERNET_IP_ADDR SubnetMask; /*0x2C */
3479 MPI2_ETHERNET_IP_ADDR GatewayIpAddress;/*0x3C */
3480 MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /*0x4C */
3481 MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /*0x5C */
3482 MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /*0x6C */
3483 U8
3484 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
3485 } MPI2_CONFIG_PAGE_ETHERNET_0,
3486 *PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
3487 Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t;
3488
3489 #define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
3490
3491 /*values for Ethernet Page 0 Status field */
3492 #define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
3493 #define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
3494 #define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
3495 #define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
3496 #define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
3497 #define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
3498 #define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
3499 #define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
3500 #define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
3501 #define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
3502 #define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
3503 #define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
3504
3505 /*values for Ethernet Page 0 MediaState field */
3506 #define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
3507 #define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
3508 #define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
3509
3510 #define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
3511 #define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
3512 #define MPI2_ETHPG0_MS_10MBIT (0x01)
3513 #define MPI2_ETHPG0_MS_100MBIT (0x02)
3514 #define MPI2_ETHPG0_MS_1GBIT (0x03)
3515
3516
3517 /*Ethernet Page 1 */
3518
3519 typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
3520 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3521 Header; /*0x00 */
3522 U32
3523 Reserved0; /*0x08 */
3524 U32
3525 Flags; /*0x0C */
3526 U8
3527 MediaState; /*0x10 */
3528 U8
3529 Reserved1; /*0x11 */
3530 U16
3531 Reserved2; /*0x12 */
3532 U8
3533 MacAddress[6]; /*0x14 */
3534 U8
3535 Reserved3; /*0x1A */
3536 U8
3537 Reserved4; /*0x1B */
3538 MPI2_ETHERNET_IP_ADDR
3539 StaticIpAddress; /*0x1C */
3540 MPI2_ETHERNET_IP_ADDR
3541 StaticSubnetMask; /*0x2C */
3542 MPI2_ETHERNET_IP_ADDR
3543 StaticGatewayIpAddress; /*0x3C */
3544 MPI2_ETHERNET_IP_ADDR
3545 StaticDNS1IpAddress; /*0x4C */
3546 MPI2_ETHERNET_IP_ADDR
3547 StaticDNS2IpAddress; /*0x5C */
3548 U32
3549 Reserved5; /*0x6C */
3550 U32
3551 Reserved6; /*0x70 */
3552 U32
3553 Reserved7; /*0x74 */
3554 U32
3555 Reserved8; /*0x78 */
3556 U8
3557 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
3558 } MPI2_CONFIG_PAGE_ETHERNET_1,
3559 *PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
3560 Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t;
3561
3562 #define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
3563
3564 /*values for Ethernet Page 1 Flags field */
3565 #define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
3566 #define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
3567 #define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
3568 #define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
3569 #define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
3570 #define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
3571 #define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
3572 #define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
3573 #define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
3574
3575 /*values for Ethernet Page 1 MediaState field */
3576 #define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
3577 #define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
3578 #define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
3579
3580 #define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
3581 #define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
3582 #define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
3583 #define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
3584 #define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
3585
3586
3587 /****************************************************************************
3588 * Extended Manufacturing Config Pages
3589 ****************************************************************************/
3590
3591 /*
3592 *Generic structure to use for product-specific extended manufacturing pages
3593 *(currently Extended Manufacturing Page 40 through Extended Manufacturing
3594 *Page 60).
3595 */
3596
3597 typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
3598 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3599 Header; /*0x00 */
3600 U32
3601 ProductSpecificInfo; /*0x08 */
3602 } MPI2_CONFIG_PAGE_EXT_MAN_PS,
3603 *PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
3604 Mpi2ExtManufacturingPagePS_t,
3605 *pMpi2ExtManufacturingPagePS_t;
3606
3607 /*PageVersion should be provided by product-specific code */
3608
3609
3610
3611 /****************************************************************************
3612 * values for fields used by several types of PCIe Config Pages
3613 ****************************************************************************/
3614
3615 /*values for NegotiatedLinkRates fields */
3616 #define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
3617 /*link rates used for Negotiated Physical Link Rate */
3618 #define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN (0x00)
3619 #define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01)
3620 #define MPI26_PCIE_NEG_LINK_RATE_2_5 (0x02)
3621 #define MPI26_PCIE_NEG_LINK_RATE_5_0 (0x03)
3622 #define MPI26_PCIE_NEG_LINK_RATE_8_0 (0x04)
3623 #define MPI26_PCIE_NEG_LINK_RATE_16_0 (0x05)
3624
3625
3626 /****************************************************************************
3627 * PCIe IO Unit Config Pages (MPI v2.6 and later)
3628 ****************************************************************************/
3629
3630 /*PCIe IO Unit Page 0 */
3631
3632 typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA {
3633 U8 Link; /*0x00 */
3634 U8 LinkFlags; /*0x01 */
3635 U8 PhyFlags; /*0x02 */
3636 U8 NegotiatedLinkRate; /*0x03 */
3637 U32 ControllerPhyDeviceInfo;/*0x04 */
3638 U16 AttachedDevHandle; /*0x08 */
3639 U16 ControllerDevHandle; /*0x0A */
3640 U32 EnumerationStatus; /*0x0C */
3641 U32 Reserved1; /*0x10 */
3642 } MPI26_PCIE_IO_UNIT0_PHY_DATA,
3643 *PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA,
3644 Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t;
3645
3646 /*
3647 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3648 *one and check the value returned for NumPhys at runtime.
3649 */
3650 #ifndef MPI26_PCIE_IOUNIT0_PHY_MAX
3651 #define MPI26_PCIE_IOUNIT0_PHY_MAX (1)
3652 #endif
3653
3654 typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
3655 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3656 U32 Reserved1; /*0x08 */
3657 U8 NumPhys; /*0x0C */
3658 U8 InitStatus; /*0x0D */
3659 U16 Reserved3; /*0x0E */
3660 MPI26_PCIE_IO_UNIT0_PHY_DATA
3661 PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */
3662 } MPI26_CONFIG_PAGE_PIOUNIT_0,
3663 *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0,
3664 Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t;
3665
3666 #define MPI26_PCIEIOUNITPAGE0_PAGEVERSION (0x00)
3667
3668 /*values for PCIe IO Unit Page 0 LinkFlags */
3669 #define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08)
3670
3671 /*values for PCIe IO Unit Page 0 PhyFlags */
3672 #define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
3673
3674 /*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
3675
3676 /*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
3677 *values
3678 */
3679
3680 /*values for PCIe IO Unit Page 0 EnumerationStatus */
3681 #define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000)
3682 #define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED (0x20000000)
3683
3684
3685 /*PCIe IO Unit Page 1 */
3686
3687 typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
3688 U8 Link; /*0x00 */
3689 U8 LinkFlags; /*0x01 */
3690 U8 PhyFlags; /*0x02 */
3691 U8 MaxMinLinkRate; /*0x03 */
3692 U32 ControllerPhyDeviceInfo; /*0x04 */
3693 U32 Reserved1; /*0x08 */
3694 } MPI26_PCIE_IO_UNIT1_PHY_DATA,
3695 *PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA,
3696 Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
3697
3698 /*values for LinkFlags */
3699 #define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00)
3700 #define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01)
3701
3702 /*
3703 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3704 *one and check the value returned for NumPhys at runtime.
3705 */
3706 #ifndef MPI26_PCIE_IOUNIT1_PHY_MAX
3707 #define MPI26_PCIE_IOUNIT1_PHY_MAX (1)
3708 #endif
3709
3710 typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
3711 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3712 U16 ControlFlags; /*0x08 */
3713 U16 Reserved; /*0x0A */
3714 U16 AdditionalControlFlags; /*0x0C */
3715 U16 NVMeMaxQueueDepth; /*0x0E */
3716 U8 NumPhys; /*0x10 */
3717 U8 Reserved1; /*0x11 */
3718 U16 Reserved2; /*0x12 */
3719 MPI26_PCIE_IO_UNIT1_PHY_DATA
3720 PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
3721 } MPI26_CONFIG_PAGE_PIOUNIT_1,
3722 *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1,
3723 Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t;
3724
3725 #define MPI26_PCIEIOUNITPAGE1_PAGEVERSION (0x00)
3726
3727 /*values for PCIe IO Unit Page 1 PhyFlags */
3728 #define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
3729 #define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY (0x01)
3730
3731 /*values for PCIe IO Unit Page 1 MaxMinLinkRate */
3732 #define MPI26_PCIEIOUNIT1_MAX_RATE_MASK (0xF0)
3733 #define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT (4)
3734 #define MPI26_PCIEIOUNIT1_MAX_RATE_2_5 (0x20)
3735 #define MPI26_PCIEIOUNIT1_MAX_RATE_5_0 (0x30)
3736 #define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40)
3737 #define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50)
3738
3739 /*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
3740 *values
3741 */
3742
3743
3744 /****************************************************************************
3745 * PCIe Switch Config Pages (MPI v2.6 and later)
3746 ****************************************************************************/
3747
3748 /*PCIe Switch Page 0 */
3749
3750 typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 {
3751 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3752 U8 PhysicalPort; /*0x08 */
3753 U8 Reserved1; /*0x09 */
3754 U16 Reserved2; /*0x0A */
3755 U16 DevHandle; /*0x0C */
3756 U16 ParentDevHandle; /*0x0E */
3757 U8 NumPorts; /*0x10 */
3758 U8 PCIeLevel; /*0x11 */
3759 U16 Reserved3; /*0x12 */
3760 U32 Reserved4; /*0x14 */
3761 U32 Reserved5; /*0x18 */
3762 U32 Reserved6; /*0x1C */
3763 } MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0,
3764 Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t;
3765
3766 #define MPI26_PCIESWITCH0_PAGEVERSION (0x00)
3767
3768
3769 /*PCIe Switch Page 1 */
3770
3771 typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
3772 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3773 U8 PhysicalPort; /*0x08 */
3774 U8 Reserved1; /*0x09 */
3775 U16 Reserved2; /*0x0A */
3776 U8 NumPorts; /*0x0C */
3777 U8 PortNum; /*0x0D */
3778 U16 AttachedDevHandle; /*0x0E */
3779 U16 SwitchDevHandle; /*0x10 */
3780 U8 NegotiatedPortWidth; /*0x12 */
3781 U8 NegotiatedLinkRate; /*0x13 */
3782 U32 Reserved4; /*0x14 */
3783 U32 Reserved5; /*0x18 */
3784 } MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1,
3785 Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t;
3786
3787 #define MPI26_PCIESWITCH1_PAGEVERSION (0x00)
3788
3789 /*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
3790
3791
3792 /****************************************************************************
3793 * PCIe Device Config Pages (MPI v2.6 and later)
3794 ****************************************************************************/
3795
3796 /*PCIe Device Page 0 */
3797
3798 typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
3799 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3800 U16 Slot; /*0x08 */
3801 U16 EnclosureHandle; /*0x0A */
3802 U64 WWID; /*0x0C */
3803 U16 ParentDevHandle; /*0x14 */
3804 U8 PortNum; /*0x16 */
3805 U8 AccessStatus; /*0x17 */
3806 U16 DevHandle; /*0x18 */
3807 U8 PhysicalPort; /*0x1A */
3808 U8 Reserved1; /*0x1B */
3809 U32 DeviceInfo; /*0x1C */
3810 U32 Flags; /*0x20 */
3811 U8 SupportedLinkRates; /*0x24 */
3812 U8 MaxPortWidth; /*0x25 */
3813 U8 NegotiatedPortWidth; /*0x26 */
3814 U8 NegotiatedLinkRate; /*0x27 */
3815 U8 EnclosureLevel; /*0x28 */
3816 U8 Reserved2; /*0x29 */
3817 U16 Reserved3; /*0x2A */
3818 U8 ConnectorName[4]; /*0x2C */
3819 U32 Reserved4; /*0x30 */
3820 U32 Reserved5; /*0x34 */
3821 } MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0,
3822 Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t;
3823
3824 #define MPI26_PCIEDEVICE0_PAGEVERSION (0x01)
3825
3826 /*values for PCIe Device Page 0 AccessStatus field */
3827 #define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS (0x00)
3828 #define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION (0x04)
3829 #define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED (0x02)
3830 #define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED (0x07)
3831 #define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED (0x08)
3832 #define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE (0x09)
3833 #define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED (0x0A)
3834 #define MPI26_PCIEDEV0_ASTATUS_UNKNOWN (0x10)
3835
3836 #define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT (0x30)
3837 #define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x31)
3838 #define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED (0x32)
3839 #define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED (0x33)
3840 #define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED (0x34)
3841 #define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED (0x35)
3842 #define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36)
3843 #define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT (0x37)
3844 #define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS (0x38)
3845
3846 #define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX (0x3F)
3847
3848 /*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo
3849 *field
3850 */
3851
3852 /*values for PCIe Device Page 0 Flags field */
3853 #define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
3854 #define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000)
3855 #define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000)
3856 #define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400)
3857 #define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200)
3858 #define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
3859 #define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080)
3860 #define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040)
3861 #define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020)
3862 #define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010)
3863 #define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002)
3864 #define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001)
3865
3866 /* values for PCIe Device Page 0 SupportedLinkRates field */
3867 #define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08)
3868 #define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED (0x04)
3869 #define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED (0x02)
3870 #define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED (0x01)
3871
3872 /*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
3873
3874
3875 /*PCIe Device Page 2 */
3876
3877 typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 {
3878 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3879 U16 DevHandle; /*0x08 */
3880 U8 ControllerResetTO; /* 0x0A */
3881 U8 Reserved1; /* 0x0B */
3882 U32 MaximumDataTransferSize; /*0x0C */
3883 U32 Capabilities; /*0x10 */
3884 U16 NOIOB; /* 0x14 */
3885 U16 Reserved2; /* 0x16 */
3886 } MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2,
3887 Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t;
3888
3889 #define MPI26_PCIEDEVICE2_PAGEVERSION (0x01)
3890
3891 /*defines for PCIe Device Page 2 Capabilities field */
3892 #define MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN (0x00000008)
3893 #define MPI26_PCIEDEV2_CAP_SGL_FORMAT (0x00000004)
3894 #define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT (0x00000002)
3895 #define MPI26_PCIEDEV2_CAP_SGL_SUPPORT (0x00000001)
3896
3897 /* Defines for the NOIOB field */
3898 #define MPI26_PCIEDEV2_NOIOB_UNSUPPORTED (0x0000)
3899
3900 /****************************************************************************
3901 * PCIe Link Config Pages (MPI v2.6 and later)
3902 ****************************************************************************/
3903
3904 /*PCIe Link Page 1 */
3905
3906 typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 {
3907 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3908 U8 Link; /*0x08 */
3909 U8 Reserved1; /*0x09 */
3910 U16 Reserved2; /*0x0A */
3911 U32 CorrectableErrorCount; /*0x0C */
3912 U16 NonFatalErrorCount; /*0x10 */
3913 U16 Reserved3; /*0x12 */
3914 U16 FatalErrorCount; /*0x14 */
3915 U16 Reserved4; /*0x16 */
3916 } MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1,
3917 Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t;
3918
3919 #define MPI26_PCIELINK1_PAGEVERSION (0x00)
3920
3921 /*PCIe Link Page 2 */
3922
3923 typedef struct _MPI26_PCIELINK2_LINK_EVENT {
3924 U8 LinkEventCode; /*0x00 */
3925 U8 Reserved1; /*0x01 */
3926 U16 Reserved2; /*0x02 */
3927 U32 LinkEventInfo; /*0x04 */
3928 } MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT,
3929 Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t;
3930
3931 /*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */
3932
3933
3934 /*
3935 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3936 *one and check the value returned for NumLinkEvents at runtime.
3937 */
3938 #ifndef MPI26_PCIELINK2_LINK_EVENT_MAX
3939 #define MPI26_PCIELINK2_LINK_EVENT_MAX (1)
3940 #endif
3941
3942 typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
3943 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3944 U8 Link; /*0x08 */
3945 U8 Reserved1; /*0x09 */
3946 U16 Reserved2; /*0x0A */
3947 U8 NumLinkEvents; /*0x0C */
3948 U8 Reserved3; /*0x0D */
3949 U16 Reserved4; /*0x0E */
3950 MPI26_PCIELINK2_LINK_EVENT
3951 LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */
3952 } MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2,
3953 Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t;
3954
3955 #define MPI26_PCIELINK2_PAGEVERSION (0x00)
3956
3957 /*PCIe Link Page 3 */
3958
3959 typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG {
3960 U8 LinkEventCode; /*0x00 */
3961 U8 Reserved1; /*0x01 */
3962 U16 Reserved2; /*0x02 */
3963 U8 CounterType; /*0x04 */
3964 U8 ThresholdWindow; /*0x05 */
3965 U8 TimeUnits; /*0x06 */
3966 U8 Reserved3; /*0x07 */
3967 U32 EventThreshold; /*0x08 */
3968 U16 ThresholdFlags; /*0x0C */
3969 U16 Reserved4; /*0x0E */
3970 } MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG,
3971 Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t;
3972
3973 /*values for LinkEventCode field */
3974 #define MPI26_PCIELINK3_EVTCODE_NO_EVENT (0x00)
3975 #define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED (0x01)
3976 #define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED (0x02)
3977 #define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED (0x03)
3978 #define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED (0x04)
3979 #define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED (0x05)
3980 #define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED (0x06)
3981 #define MPI26_PCIELINK3_EVTCODE_POISONED_TLP (0x07)
3982 #define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP (0x08)
3983 #define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP (0x09)
3984 #define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE (0x0A)
3985 #define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE (0x0B)
3986 #define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE (0x0C)
3987 #define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE (0x0D)
3988 #define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE (0x0E)
3989 #define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE (0x0F)
3990 #define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR (0x10)
3991 #define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR (0x11)
3992 #define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR (0x12)
3993
3994 /*values for the CounterType field */
3995 #define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING (0x00)
3996 #define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING (0x01)
3997 #define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE (0x02)
3998
3999 /*values for the TimeUnits field */
4000 #define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS (0x00)
4001 #define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS (0x01)
4002 #define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND (0x02)
4003 #define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS (0x03)
4004
4005 /*values for the ThresholdFlags field */
4006 #define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001)
4007
4008 /*
4009 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
4010 *one and check the value returned for NumLinkEvents at runtime.
4011 */
4012 #ifndef MPI26_PCIELINK3_LINK_EVENT_MAX
4013 #define MPI26_PCIELINK3_LINK_EVENT_MAX (1)
4014 #endif
4015
4016 typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
4017 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
4018 U8 Link; /*0x08 */
4019 U8 Reserved1; /*0x09 */
4020 U16 Reserved2; /*0x0A */
4021 U8 NumLinkEvents; /*0x0C */
4022 U8 Reserved3; /*0x0D */
4023 U16 Reserved4; /*0x0E */
4024 MPI26_PCIELINK3_LINK_EVENT_CONFIG
4025 LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */
4026 } MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3,
4027 Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t;
4028
4029 #define MPI26_PCIELINK3_PAGEVERSION (0x00)
4030
4031
4032 #endif
Linux with added FPC-III support