?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.18.10
[linux/fpc-iii.git] / drivers / scsi / ncr53c8xx.h
blob02901c54b08be400d75afaf9d48816cb7346fddf
1 /******************************************************************************
2 ** Device driver for the PCI-SCSI NCR538XX controller family.
3 **
4 ** Copyright (C) 1994 Wolfgang Stanglmeier
5 ** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
6 **
7 ** This program is free software; you can redistribute it and/or modify
8 ** it under the terms of the GNU General Public License as published by
9 ** the Free Software Foundation; either version 2 of the License, or
10 ** (at your option) any later version.
11 **
12 ** This program is distributed in the hope that it will be useful,
13 ** but WITHOUT ANY WARRANTY; without even the implied warranty of
14 ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 ** GNU General Public License for more details.
16 **
17 ** You should have received a copy of the GNU General Public License
18 ** along with this program; if not, write to the Free Software
19 ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 **
21 **-----------------------------------------------------------------------------
22 **
23 ** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver
24 ** and is currently maintained by
25 **
26 ** Gerard Roudier <groudier@free.fr>
27 **
28 ** Being given that this driver originates from the FreeBSD version, and
29 ** in order to keep synergy on both, any suggested enhancements and corrections
30 ** received on Linux are automatically a potential candidate for the FreeBSD
31 ** version.
32 **
33 ** The original driver has been written for 386bsd and FreeBSD by
34 ** Wolfgang Stanglmeier <wolf@cologne.de>
35 ** Stefan Esser <se@mi.Uni-Koeln.de>
36 **
37 ** And has been ported to NetBSD by
38 ** Charles M. Hannum <mycroft@gnu.ai.mit.edu>
39 **
40 ** NVRAM detection and reading.
41 ** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
42 **
43 ** Added support for MIPS big endian systems.
44 ** Carsten Langgaard, carstenl@mips.com
45 ** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
46 **
47 ** Added support for HP PARISC big endian systems.
48 ** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
49 **
50 *******************************************************************************
51 */
52
53 #ifndef NCR53C8XX_H
54 #define NCR53C8XX_H
55
56 #include <scsi/scsi_host.h>
57
58
59 /*
60 ** If you want a driver as small as possible, donnot define the
61 ** following options.
62 */
63 #define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
64 #define SCSI_NCR_DEBUG_INFO_SUPPORT
65
66 /*
67 ** To disable integrity checking, do not define the
68 ** following option.
69 */
70 #ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
71 # define SCSI_NCR_ENABLE_INTEGRITY_CHECK
72 #endif
73
74 /* ---------------------------------------------------------------------
75 ** Take into account kernel configured parameters.
76 ** Most of these options can be overridden at startup by a command line.
77 ** ---------------------------------------------------------------------
78 */
79
80 /*
81 * For Ultra2 and Ultra3 SCSI support option, use special features.
82 *
83 * Value (default) means:
84 * bit 0 : all features enabled, except:
85 * bit 1 : PCI Write And Invalidate.
86 * bit 2 : Data Phase Mismatch handling from SCRIPTS.
87 *
88 * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
89 * enabled by the driver.
90 */
91 #define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
92
93 #define SCSI_NCR_MAX_SYNC (80)
94
95 /*
96 * Allow tags from 2 to 256, default 8
97 */
98 #ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
99 #if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
100 #define SCSI_NCR_MAX_TAGS (2)
101 #elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
102 #define SCSI_NCR_MAX_TAGS (256)
103 #else
104 #define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
105 #endif
106 #else
107 #define SCSI_NCR_MAX_TAGS (8)
108 #endif
109
110 /*
111 * Allow tagged command queuing support if configured with default number
112 * of tags set to max (see above).
113 */
114 #ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
115 #define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
116 #elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
117 #define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
118 #else
119 #define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
120 #endif
121
122 /*
123 * Immediate arbitration
124 */
125 #if defined(CONFIG_SCSI_NCR53C8XX_IARB)
126 #define SCSI_NCR_IARB_SUPPORT
127 #endif
128
129 /*
130 * Sync transfer frequency at startup.
131 * Allow from 5Mhz to 80Mhz default 20 Mhz.
132 */
133 #ifndef CONFIG_SCSI_NCR53C8XX_SYNC
134 #define CONFIG_SCSI_NCR53C8XX_SYNC (20)
135 #elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
136 #undef CONFIG_SCSI_NCR53C8XX_SYNC
137 #define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
138 #endif
139
140 #if CONFIG_SCSI_NCR53C8XX_SYNC == 0
141 #define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
142 #elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
143 #define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
144 #elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
145 #define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
146 #elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
147 #define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
148 #elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
149 #define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
150 #else
151 #define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
152 #endif
153
154 /*
155 * Disallow disconnections at boot-up
156 */
157 #ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
158 #define SCSI_NCR_SETUP_DISCONNECTION (0)
159 #else
160 #define SCSI_NCR_SETUP_DISCONNECTION (1)
161 #endif
162
163 /*
164 * Force synchronous negotiation for all targets
165 */
166 #ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
167 #define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
168 #else
169 #define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
170 #endif
171
172 /*
173 * Disable master parity checking (flawed hardwares need that)
174 */
175 #ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
176 #define SCSI_NCR_SETUP_MASTER_PARITY (0)
177 #else
178 #define SCSI_NCR_SETUP_MASTER_PARITY (1)
179 #endif
180
181 /*
182 * Disable scsi parity checking (flawed devices may need that)
183 */
184 #ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
185 #define SCSI_NCR_SETUP_SCSI_PARITY (0)
186 #else
187 #define SCSI_NCR_SETUP_SCSI_PARITY (1)
188 #endif
189
190 /*
191 * Settle time after reset at boot-up
192 */
193 #define SCSI_NCR_SETUP_SETTLE_TIME (2)
194
195 /*
196 ** Bridge quirks work-around option defaulted to 1.
197 */
198 #ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
199 #define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
200 #endif
201
202 /*
203 ** Work-around common bridge misbehaviour.
204 **
205 ** - Do not flush posted writes in the opposite
206 ** direction on read.
207 ** - May reorder DMA writes to memory.
208 **
209 ** This option should not affect performances
210 ** significantly, so it is the default.
211 */
212 #if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
213 #define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
214 #define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
215 #define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
216
217 /*
218 ** Same as option 1, but also deal with
219 ** misconfigured interrupts.
220 **
221 ** - Edge triggered instead of level sensitive.
222 ** - No interrupt line connected.
223 ** - IRQ number misconfigured.
224 **
225 ** If no interrupt is delivered, the driver will
226 ** catch the interrupt conditions 10 times per
227 ** second. No need to say that this option is
228 ** not recommended.
229 */
230 #elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
231 #define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
232 #define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
233 #define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
234 #define SCSI_NCR_PCIQ_BROKEN_INTR
235
236 /*
237 ** Some bridge designers decided to flush
238 ** everything prior to deliver the interrupt.
239 ** This option tries to deal with such a
240 ** behaviour.
241 */
242 #elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
243 #define SCSI_NCR_PCIQ_SYNC_ON_INTR
244 #endif
245
246 /*
247 ** Other parameters not configurable with "make config"
248 ** Avoid to change these constants, unless you know what you are doing.
249 */
250
251 #define SCSI_NCR_ALWAYS_SIMPLE_TAG
252 #define SCSI_NCR_MAX_SCATTER (127)
253 #define SCSI_NCR_MAX_TARGET (16)
254
255 /*
256 ** Compute some desirable value for CAN_QUEUE
257 ** and CMD_PER_LUN.
258 ** The driver will use lower values if these
259 ** ones appear to be too large.
260 */
261 #define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
262 #define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
263
264 #define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
265 #define SCSI_NCR_TIMER_INTERVAL (HZ)
266
267 #define SCSI_NCR_MAX_LUN (16)
268
269 /*
270 * IO functions definition for big/little endian CPU support.
271 * For now, the NCR is only supported in little endian addressing mode,
272 */
273
274 #ifdef __BIG_ENDIAN
275
276 #define inw_l2b inw
277 #define inl_l2b inl
278 #define outw_b2l outw
279 #define outl_b2l outl
280
281 #define readb_raw readb
282 #define writeb_raw writeb
283
284 #if defined(SCSI_NCR_BIG_ENDIAN)
285 #define readw_l2b __raw_readw
286 #define readl_l2b __raw_readl
287 #define writew_b2l __raw_writew
288 #define writel_b2l __raw_writel
289 #define readw_raw __raw_readw
290 #define readl_raw __raw_readl
291 #define writew_raw __raw_writew
292 #define writel_raw __raw_writel
293 #else /* Other big-endian */
294 #define readw_l2b readw
295 #define readl_l2b readl
296 #define writew_b2l writew
297 #define writel_b2l writel
298 #define readw_raw readw
299 #define readl_raw readl
300 #define writew_raw writew
301 #define writel_raw writel
302 #endif
303
304 #else /* little endian */
305
306 #define inw_raw inw
307 #define inl_raw inl
308 #define outw_raw outw
309 #define outl_raw outl
310
311 #define readb_raw readb
312 #define readw_raw readw
313 #define readl_raw readl
314 #define writeb_raw writeb
315 #define writew_raw writew
316 #define writel_raw writel
317
318 #endif
319
320 #if !defined(__hppa__) && !defined(__mips__)
321 #ifdef SCSI_NCR_BIG_ENDIAN
322 #error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
323 #endif
324 #endif
325
326 #define MEMORY_BARRIER() mb()
327
328
329 /*
330 * If the NCR uses big endian addressing mode over the
331 * PCI, actual io register addresses for byte and word
332 * accesses must be changed according to lane routing.
333 * Btw, ncr_offb() and ncr_offw() macros only apply to
334 * constants and so donnot generate bloated code.
335 */
336
337 #if defined(SCSI_NCR_BIG_ENDIAN)
338
339 #define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
340 #define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
341
342 #else
343
344 #define ncr_offb(o) (o)
345 #define ncr_offw(o) (o)
346
347 #endif
348
349 /*
350 * If the CPU and the NCR use same endian-ness addressing,
351 * no byte reordering is needed for script patching.
352 * Macro cpu_to_scr() is to be used for script patching.
353 * Macro scr_to_cpu() is to be used for getting a DWORD
354 * from the script.
355 */
356
357 #if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
358
359 #define cpu_to_scr(dw) cpu_to_le32(dw)
360 #define scr_to_cpu(dw) le32_to_cpu(dw)
361
362 #elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
363
364 #define cpu_to_scr(dw) cpu_to_be32(dw)
365 #define scr_to_cpu(dw) be32_to_cpu(dw)
366
367 #else
368
369 #define cpu_to_scr(dw) (dw)
370 #define scr_to_cpu(dw) (dw)
371
372 #endif
373
374 /*
375 * Access to the controller chip.
376 *
377 * If the CPU and the NCR use same endian-ness addressing,
378 * no byte reordering is needed for accessing chip io
379 * registers. Functions suffixed by '_raw' are assumed
380 * to access the chip over the PCI without doing byte
381 * reordering. Functions suffixed by '_l2b' are
382 * assumed to perform little-endian to big-endian byte
383 * reordering, those suffixed by '_b2l' blah, blah,
384 * blah, ...
385 */
386
387 /*
388 * MEMORY mapped IO input / output
389 */
390
391 #define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
392 #define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
393
394 #if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
395
396 #define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
397 #define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
398
399 #define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
400 #define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
401
402 #elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
403
404 #define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
405 #define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
406
407 #define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
408 #define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
409
410 #else
411
412 #ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
413 /* Only 8 or 32 bit transfers allowed */
414 #define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
415 #else
416 #define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
417 #endif
418 #define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
419
420 #ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
421 /* Only 8 or 32 bit transfers allowed */
422 #define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
423 #else
424 #define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
425 #endif
426 #define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
427
428 #endif
429
430 #define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
431 #define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
432 #define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
433
434 #define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
435 #define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
436 #define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
437
438 /*
439 * Set bit field ON, OFF
440 */
441
442 #define OUTONB(r, m) OUTB(r, INB(r) | (m))
443 #define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
444 #define OUTONW(r, m) OUTW(r, INW(r) | (m))
445 #define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
446 #define OUTONL(r, m) OUTL(r, INL(r) | (m))
447 #define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
448
449 /*
450 * We normally want the chip to have a consistent view
451 * of driver internal data structures when we restart it.
452 * Thus these macros.
453 */
454 #define OUTL_DSP(v) \
455 do { \
456 MEMORY_BARRIER(); \
457 OUTL (nc_dsp, (v)); \
458 } while (0)
459
460 #define OUTONB_STD() \
461 do { \
462 MEMORY_BARRIER(); \
463 OUTONB (nc_dcntl, (STD|NOCOM)); \
464 } while (0)
465
466
467 /*
468 ** NCR53C8XX devices features table.
469 */
470 struct ncr_chip {
471 unsigned short revision_id;
472 unsigned char burst_max; /* log-base-2 of max burst */
473 unsigned char offset_max;
474 unsigned char nr_divisor;
475 unsigned int features;
476 #define FE_LED0 (1<<0)
477 #define FE_WIDE (1<<1) /* Wide data transfers */
478 #define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
479 #define FE_DBLR (1<<4) /* Clock doubler present */
480 #define FE_QUAD (1<<5) /* Clock quadrupler present */
481 #define FE_ERL (1<<6) /* Enable read line */
482 #define FE_CLSE (1<<7) /* Cache line size enable */
483 #define FE_WRIE (1<<8) /* Write & Invalidate enable */
484 #define FE_ERMP (1<<9) /* Enable read multiple */
485 #define FE_BOF (1<<10) /* Burst opcode fetch */
486 #define FE_DFS (1<<11) /* DMA fifo size */
487 #define FE_PFEN (1<<12) /* Prefetch enable */
488 #define FE_LDSTR (1<<13) /* Load/Store supported */
489 #define FE_RAM (1<<14) /* On chip RAM present */
490 #define FE_VARCLK (1<<15) /* SCSI clock may vary */
491 #define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
492 #define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
493 #define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
494 #define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
495 #define FE_LEDC (1<<20) /* Hardware control of LED */
496 #define FE_DIFF (1<<21) /* Support Differential SCSI */
497 #define FE_66MHZ (1<<23) /* 66MHz PCI Support */
498 #define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
499 #define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
500 #define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
501 #define FE_EHP (1<<27) /* 720: Even host parity */
502 #define FE_MUX (1<<28) /* 720: Multiplexed bus */
503 #define FE_EA (1<<29) /* 720: Enable Ack */
504
505 #define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
506 #define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
507 #define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
508 };
509
510
511 /*
512 ** Driver setup structure.
513 **
514 ** This structure is initialized from linux config options.
515 ** It can be overridden at boot-up by the boot command line.
516 */
517 #define SCSI_NCR_MAX_EXCLUDES 8
518 struct ncr_driver_setup {
519 u8 master_parity;
520 u8 scsi_parity;
521 u8 disconnection;
522 u8 special_features;
523 u8 force_sync_nego;
524 u8 reverse_probe;
525 u8 pci_fix_up;
526 u8 use_nvram;
527 u8 verbose;
528 u8 default_tags;
529 u16 default_sync;
530 u16 debug;
531 u8 burst_max;
532 u8 led_pin;
533 u8 max_wide;
534 u8 settle_delay;
535 u8 diff_support;
536 u8 irqm;
537 u8 bus_check;
538 u8 optimize;
539 u8 recovery;
540 u8 host_id;
541 u16 iarb;
542 u32 excludes[SCSI_NCR_MAX_EXCLUDES];
543 char tag_ctrl[100];
544 };
545
546 /*
547 ** Initial setup.
548 ** Can be overridden at startup by a command line.
549 */
550 #define SCSI_NCR_DRIVER_SETUP \
551 { \
552 SCSI_NCR_SETUP_MASTER_PARITY, \
553 SCSI_NCR_SETUP_SCSI_PARITY, \
554 SCSI_NCR_SETUP_DISCONNECTION, \
555 SCSI_NCR_SETUP_SPECIAL_FEATURES, \
556 SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
557 0, \
558 0, \
559 1, \
560 0, \
561 SCSI_NCR_SETUP_DEFAULT_TAGS, \
562 SCSI_NCR_SETUP_DEFAULT_SYNC, \
563 0x00, \
564 7, \
565 0, \
566 1, \
567 SCSI_NCR_SETUP_SETTLE_TIME, \
568 0, \
569 0, \
570 1, \
571 0, \
572 0, \
573 255, \
574 0x00 \
575 }
576
577 /*
578 ** Boot fail safe setup.
579 ** Override initial setup from boot command line:
580 ** ncr53c8xx=safe:y
581 */
582 #define SCSI_NCR_DRIVER_SAFE_SETUP \
583 { \
584 0, \
585 1, \
586 0, \
587 0, \
588 0, \
589 0, \
590 0, \
591 1, \
592 2, \
593 0, \
594 255, \
595 0x00, \
596 255, \
597 0, \
598 0, \
599 10, \
600 1, \
601 1, \
602 1, \
603 0, \
604 0, \
605 255 \
606 }
607
608 /**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
609
610 /*-----------------------------------------------------------------
611 **
612 ** The ncr 53c810 register structure.
613 **
614 **-----------------------------------------------------------------
615 */
616
617 struct ncr_reg {
618 /*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
619
620 /*01*/ u8 nc_scntl1; /* no reset */
621 #define ISCON 0x10 /* connected to scsi */
622 #define CRST 0x08 /* force reset */
623 #define IARB 0x02 /* immediate arbitration */
624
625 /*02*/ u8 nc_scntl2; /* no disconnect expected */
626 #define SDU 0x80 /* cmd: disconnect will raise error */
627 #define CHM 0x40 /* sta: chained mode */
628 #define WSS 0x08 /* sta: wide scsi send [W]*/
629 #define WSR 0x01 /* sta: wide scsi received [W]*/
630
631 /*03*/ u8 nc_scntl3; /* cnf system clock dependent */
632 #define EWS 0x08 /* cmd: enable wide scsi [W]*/
633 #define ULTRA 0x80 /* cmd: ULTRA enable */
634 /* bits 0-2, 7 rsvd for C1010 */
635
636 /*04*/ u8 nc_scid; /* cnf host adapter scsi address */
637 #define RRE 0x40 /* r/w:e enable response to resel. */
638 #define SRE 0x20 /* r/w:e enable response to select */
639
640 /*05*/ u8 nc_sxfer; /* ### Sync speed and count */
641 /* bits 6-7 rsvd for C1010 */
642
643 /*06*/ u8 nc_sdid; /* ### Destination-ID */
644
645 /*07*/ u8 nc_gpreg; /* ??? IO-Pins */
646
647 /*08*/ u8 nc_sfbr; /* ### First byte in phase */
648
649 /*09*/ u8 nc_socl;
650 #define CREQ 0x80 /* r/w: SCSI-REQ */
651 #define CACK 0x40 /* r/w: SCSI-ACK */
652 #define CBSY 0x20 /* r/w: SCSI-BSY */
653 #define CSEL 0x10 /* r/w: SCSI-SEL */
654 #define CATN 0x08 /* r/w: SCSI-ATN */
655 #define CMSG 0x04 /* r/w: SCSI-MSG */
656 #define CC_D 0x02 /* r/w: SCSI-C_D */
657 #define CI_O 0x01 /* r/w: SCSI-I_O */
658
659 /*0a*/ u8 nc_ssid;
660
661 /*0b*/ u8 nc_sbcl;
662
663 /*0c*/ u8 nc_dstat;
664 #define DFE 0x80 /* sta: dma fifo empty */
665 #define MDPE 0x40 /* int: master data parity error */
666 #define BF 0x20 /* int: script: bus fault */
667 #define ABRT 0x10 /* int: script: command aborted */
668 #define SSI 0x08 /* int: script: single step */
669 #define SIR 0x04 /* int: script: interrupt instruct. */
670 #define IID 0x01 /* int: script: illegal instruct. */
671
672 /*0d*/ u8 nc_sstat0;
673 #define ILF 0x80 /* sta: data in SIDL register lsb */
674 #define ORF 0x40 /* sta: data in SODR register lsb */
675 #define OLF 0x20 /* sta: data in SODL register lsb */
676 #define AIP 0x10 /* sta: arbitration in progress */
677 #define LOA 0x08 /* sta: arbitration lost */
678 #define WOA 0x04 /* sta: arbitration won */
679 #define IRST 0x02 /* sta: scsi reset signal */
680 #define SDP 0x01 /* sta: scsi parity signal */
681
682 /*0e*/ u8 nc_sstat1;
683 #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
684
685 /*0f*/ u8 nc_sstat2;
686 #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
687 #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
688 #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
689 #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
690 #define LDSC 0x02 /* sta: disconnect & reconnect */
691
692 /*10*/ u8 nc_dsa; /* --> Base page */
693 /*11*/ u8 nc_dsa1;
694 /*12*/ u8 nc_dsa2;
695 /*13*/ u8 nc_dsa3;
696
697 /*14*/ u8 nc_istat; /* --> Main Command and status */
698 #define CABRT 0x80 /* cmd: abort current operation */
699 #define SRST 0x40 /* mod: reset chip */
700 #define SIGP 0x20 /* r/w: message from host to ncr */
701 #define SEM 0x10 /* r/w: message between host + ncr */
702 #define CON 0x08 /* sta: connected to scsi */
703 #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
704 #define SIP 0x02 /* sta: scsi-interrupt */
705 #define DIP 0x01 /* sta: host/script interrupt */
706
707 /*15*/ u8 nc_istat1; /* 896 and later cores only */
708 #define FLSH 0x04 /* sta: chip is flushing */
709 #define SRUN 0x02 /* sta: scripts are running */
710 #define SIRQD 0x01 /* r/w: disable INT pin */
711
712 /*16*/ u8 nc_mbox0; /* 896 and later cores only */
713 /*17*/ u8 nc_mbox1; /* 896 and later cores only */
714
715 /*18*/ u8 nc_ctest0;
716 #define EHP 0x04 /* 720 even host parity */
717 /*19*/ u8 nc_ctest1;
718
719 /*1a*/ u8 nc_ctest2;
720 #define CSIGP 0x40
721 /* bits 0-2,7 rsvd for C1010 */
722
723 /*1b*/ u8 nc_ctest3;
724 #define FLF 0x08 /* cmd: flush dma fifo */
725 #define CLF 0x04 /* cmd: clear dma fifo */
726 #define FM 0x02 /* mod: fetch pin mode */
727 #define WRIE 0x01 /* mod: write and invalidate enable */
728 /* bits 4-7 rsvd for C1010 */
729
730 /*1c*/ u32 nc_temp; /* ### Temporary stack */
731
732 /*20*/ u8 nc_dfifo;
733 /*21*/ u8 nc_ctest4;
734 #define MUX 0x80 /* 720 host bus multiplex mode */
735 #define BDIS 0x80 /* mod: burst disable */
736 #define MPEE 0x08 /* mod: master parity error enable */
737
738 /*22*/ u8 nc_ctest5;
739 #define DFS 0x20 /* mod: dma fifo size */
740 /* bits 0-1, 3-7 rsvd for C1010 */
741 /*23*/ u8 nc_ctest6;
742
743 /*24*/ u32 nc_dbc; /* ### Byte count and command */
744 /*28*/ u32 nc_dnad; /* ### Next command register */
745 /*2c*/ u32 nc_dsp; /* --> Script Pointer */
746 /*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
747
748 /*34*/ u8 nc_scratcha; /* Temporary register a */
749 /*35*/ u8 nc_scratcha1;
750 /*36*/ u8 nc_scratcha2;
751 /*37*/ u8 nc_scratcha3;
752
753 /*38*/ u8 nc_dmode;
754 #define BL_2 0x80 /* mod: burst length shift value +2 */
755 #define BL_1 0x40 /* mod: burst length shift value +1 */
756 #define ERL 0x08 /* mod: enable read line */
757 #define ERMP 0x04 /* mod: enable read multiple */
758 #define BOF 0x02 /* mod: burst op code fetch */
759
760 /*39*/ u8 nc_dien;
761 /*3a*/ u8 nc_sbr;
762
763 /*3b*/ u8 nc_dcntl; /* --> Script execution control */
764 #define CLSE 0x80 /* mod: cache line size enable */
765 #define PFF 0x40 /* cmd: pre-fetch flush */
766 #define PFEN 0x20 /* mod: pre-fetch enable */
767 #define EA 0x20 /* mod: 720 enable-ack */
768 #define SSM 0x10 /* mod: single step mode */
769 #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
770 #define STD 0x04 /* cmd: start dma mode */
771 #define IRQD 0x02 /* mod: irq disable */
772 #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
773 /* bits 0-1 rsvd for C1010 */
774
775 /*3c*/ u32 nc_adder;
776
777 /*40*/ u16 nc_sien; /* -->: interrupt enable */
778 /*42*/ u16 nc_sist; /* <--: interrupt status */
779 #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
780 #define STO 0x0400/* sta: timeout (select) */
781 #define GEN 0x0200/* sta: timeout (general) */
782 #define HTH 0x0100/* sta: timeout (handshake) */
783 #define MA 0x80 /* sta: phase mismatch */
784 #define CMP 0x40 /* sta: arbitration complete */
785 #define SEL 0x20 /* sta: selected by another device */
786 #define RSL 0x10 /* sta: reselected by another device*/
787 #define SGE 0x08 /* sta: gross error (over/underflow)*/
788 #define UDC 0x04 /* sta: unexpected disconnect */
789 #define RST 0x02 /* sta: scsi bus reset detected */
790 #define PAR 0x01 /* sta: scsi parity error */
791
792 /*44*/ u8 nc_slpar;
793 /*45*/ u8 nc_swide;
794 /*46*/ u8 nc_macntl;
795 /*47*/ u8 nc_gpcntl;
796 /*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
797 /*49*/ u8 nc_stime1; /* cmd: timeout user defined */
798 /*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
799
800 /*4c*/ u8 nc_stest0;
801
802 /*4d*/ u8 nc_stest1;
803 #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
804 #define DBLEN 0x08 /* clock doubler running */
805 #define DBLSEL 0x04 /* clock doubler selected */
806
807
808 /*4e*/ u8 nc_stest2;
809 #define ROF 0x40 /* reset scsi offset (after gross error!) */
810 #define DIF 0x20 /* 720 SCSI differential mode */
811 #define EXT 0x02 /* extended filtering */
812
813 /*4f*/ u8 nc_stest3;
814 #define TE 0x80 /* c: tolerAnt enable */
815 #define HSC 0x20 /* c: Halt SCSI Clock */
816 #define CSF 0x02 /* c: clear scsi fifo */
817
818 /*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
819 /*52*/ u8 nc_stest4;
820 #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
821 #define SMODE_HVD 0x40 /* High Voltage Differential */
822 #define SMODE_SE 0x80 /* Single Ended */
823 #define SMODE_LVD 0xc0 /* Low Voltage Differential */
824 #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
825 /* bits 0-5 rsvd for C1010 */
826
827 /*53*/ u8 nc_53_;
828 /*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
829 /*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
830 #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
831 #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
832 #define ENNDJ 0x20 /* Enable Non Data PM Jump */
833 #define DISFC 0x10 /* Disable Auto FIFO Clear */
834 #define DILS 0x02 /* Disable Internal Load/Store */
835 #define DPR 0x01 /* Disable Pipe Req */
836
837 /*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
838 #define ZMOD 0x80 /* High Impedance Mode */
839 #define DIC 0x10 /* Disable Internal Cycles */
840 #define DDAC 0x08 /* Disable Dual Address Cycle */
841 #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
842 #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
843 #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
844
845 /*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
846 /*5a*/ u16 nc_5a_;
847
848 /*5c*/ u8 nc_scr0; /* Working register B */
849 /*5d*/ u8 nc_scr1; /* */
850 /*5e*/ u8 nc_scr2; /* */
851 /*5f*/ u8 nc_scr3; /* */
852
853 /*60*/ u8 nc_scrx[64]; /* Working register C-R */
854 /*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
855 /*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
856 /*a8*/ u32 nc_sfs; /* Script Fetch Selector */
857 /*ac*/ u32 nc_drs; /* DSA Relative Selector */
858 /*b0*/ u32 nc_sbms; /* Static Block Move Selector */
859 /*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
860 /*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
861 /*bc*/ u16 nc_scntl4; /* C1010 only */
862 #define U3EN 0x80 /* Enable Ultra 3 */
863 #define AIPEN 0x40 /* Allow check upper byte lanes */
864 #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
865 transfer edge */
866 #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
867 transfer edge */
868
869 /*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
870 /*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
871
872 /*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
873 /*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
874 /*c8*/ u8 nc_rbc; /* Remaining Byte Count */
875 /*c9*/ u8 nc_rbc1; /* */
876 /*ca*/ u8 nc_rbc2; /* */
877 /*cb*/ u8 nc_rbc3; /* */
878
879 /*cc*/ u8 nc_ua; /* Updated Address */
880 /*cd*/ u8 nc_ua1; /* */
881 /*ce*/ u8 nc_ua2; /* */
882 /*cf*/ u8 nc_ua3; /* */
883 /*d0*/ u32 nc_esa; /* Entry Storage Address */
884 /*d4*/ u8 nc_ia; /* Instruction Address */
885 /*d5*/ u8 nc_ia1;
886 /*d6*/ u8 nc_ia2;
887 /*d7*/ u8 nc_ia3;
888 /*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
889 /*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
890
891 /* Following for C1010 only */
892 /*e0*/ u16 nc_crcpad; /* CRC Value */
893 /*e2*/ u8 nc_crccntl0; /* CRC control register */
894 #define SNDCRC 0x10 /* Send CRC Request */
895 /*e3*/ u8 nc_crccntl1; /* CRC control register */
896 /*e4*/ u32 nc_crcdata; /* CRC data register */
897 /*e8*/ u32 nc_e8_; /* rsvd */
898 /*ec*/ u32 nc_ec_; /* rsvd */
899 /*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
900
901 };
902
903 /*-----------------------------------------------------------
904 **
905 ** Utility macros for the script.
906 **
907 **-----------------------------------------------------------
908 */
909
910 #define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
911 #define REG(r) REGJ (nc_, r)
912
913 typedef u32 ncrcmd;
914
915 /*-----------------------------------------------------------
916 **
917 ** SCSI phases
918 **
919 ** DT phases illegal for ncr driver.
920 **
921 **-----------------------------------------------------------
922 */
923
924 #define SCR_DATA_OUT 0x00000000
925 #define SCR_DATA_IN 0x01000000
926 #define SCR_COMMAND 0x02000000
927 #define SCR_STATUS 0x03000000
928 #define SCR_DT_DATA_OUT 0x04000000
929 #define SCR_DT_DATA_IN 0x05000000
930 #define SCR_MSG_OUT 0x06000000
931 #define SCR_MSG_IN 0x07000000
932
933 #define SCR_ILG_OUT 0x04000000
934 #define SCR_ILG_IN 0x05000000
935
936 /*-----------------------------------------------------------
937 **
938 ** Data transfer via SCSI.
939 **
940 **-----------------------------------------------------------
941 **
942 ** MOVE_ABS (LEN)
943 ** <<start address>>
944 **
945 ** MOVE_IND (LEN)
946 ** <<dnad_offset>>
947 **
948 ** MOVE_TBL
949 ** <<dnad_offset>>
950 **
951 **-----------------------------------------------------------
952 */
953
954 #define OPC_MOVE 0x08000000
955
956 #define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
957 #define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
958 #define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
959
960 #define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
961 #define SCR_CHMOV_IND(l) ((0x20000000) | (l))
962 #define SCR_CHMOV_TBL (0x10000000)
963
964 struct scr_tblmove {
965 u32 size;
966 u32 addr;
967 };
968
969 /*-----------------------------------------------------------
970 **
971 ** Selection
972 **
973 **-----------------------------------------------------------
974 **
975 ** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
976 ** <<alternate_address>>
977 **
978 ** SEL_TBL | << dnad_offset>> [ | REL_JMP]
979 ** <<alternate_address>>
980 **
981 **-----------------------------------------------------------
982 */
983
984 #define SCR_SEL_ABS 0x40000000
985 #define SCR_SEL_ABS_ATN 0x41000000
986 #define SCR_SEL_TBL 0x42000000
987 #define SCR_SEL_TBL_ATN 0x43000000
988
989
990 #ifdef SCSI_NCR_BIG_ENDIAN
991 struct scr_tblsel {
992 u8 sel_scntl3;
993 u8 sel_id;
994 u8 sel_sxfer;
995 u8 sel_scntl4;
996 };
997 #else
998 struct scr_tblsel {
999 u8 sel_scntl4;
1000 u8 sel_sxfer;
1001 u8 sel_id;
1002 u8 sel_scntl3;
1003 };
1004 #endif
1005
1006 #define SCR_JMP_REL 0x04000000
1007 #define SCR_ID(id) (((u32)(id)) << 16)
1008
1009 /*-----------------------------------------------------------
1010 **
1011 ** Waiting for Disconnect or Reselect
1012 **
1013 **-----------------------------------------------------------
1014 **
1015 ** WAIT_DISC
1016 ** dummy: <<alternate_address>>
1017 **
1018 ** WAIT_RESEL
1019 ** <<alternate_address>>
1020 **
1021 **-----------------------------------------------------------
1022 */
1023
1024 #define SCR_WAIT_DISC 0x48000000
1025 #define SCR_WAIT_RESEL 0x50000000
1026
1027 /*-----------------------------------------------------------
1028 **
1029 ** Bit Set / Reset
1030 **
1031 **-----------------------------------------------------------
1032 **
1033 ** SET (flags {|.. })
1034 **
1035 ** CLR (flags {|.. })
1036 **
1037 **-----------------------------------------------------------
1038 */
1039
1040 #define SCR_SET(f) (0x58000000 | (f))
1041 #define SCR_CLR(f) (0x60000000 | (f))
1042
1043 #define SCR_CARRY 0x00000400
1044 #define SCR_TRG 0x00000200
1045 #define SCR_ACK 0x00000040
1046 #define SCR_ATN 0x00000008
1047
1048
1049
1050
1051 /*-----------------------------------------------------------
1052 **
1053 ** Memory to memory move
1054 **
1055 **-----------------------------------------------------------
1056 **
1057 ** COPY (bytecount)
1058 ** << source_address >>
1059 ** << destination_address >>
1060 **
1061 ** SCR_COPY sets the NO FLUSH option by default.
1062 ** SCR_COPY_F does not set this option.
1063 **
1064 ** For chips which do not support this option,
1065 ** ncr_copy_and_bind() will remove this bit.
1066 **-----------------------------------------------------------
1067 */
1068
1069 #define SCR_NO_FLUSH 0x01000000
1070
1071 #define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
1072 #define SCR_COPY_F(n) (0xc0000000 | (n))
1073
1074 /*-----------------------------------------------------------
1075 **
1076 ** Register move and binary operations
1077 **
1078 **-----------------------------------------------------------
1079 **
1080 ** SFBR_REG (reg, op, data) reg = SFBR op data
1081 ** << 0 >>
1082 **
1083 ** REG_SFBR (reg, op, data) SFBR = reg op data
1084 ** << 0 >>
1085 **
1086 ** REG_REG (reg, op, data) reg = reg op data
1087 ** << 0 >>
1088 **
1089 **-----------------------------------------------------------
1090 ** On 810A, 860, 825A, 875, 895 and 896 chips the content
1091 ** of SFBR register can be used as data (SCR_SFBR_DATA).
1092 ** The 896 has additional IO registers starting at
1093 ** offset 0x80. Bit 7 of register offset is stored in
1094 ** bit 7 of the SCRIPTS instruction first DWORD.
1095 **-----------------------------------------------------------
1096 */
1097
1098 #define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
1099
1100 #define SCR_SFBR_REG(reg,op,data) \
1101 (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1102
1103 #define SCR_REG_SFBR(reg,op,data) \
1104 (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1105
1106 #define SCR_REG_REG(reg,op,data) \
1107 (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1108
1109
1110 #define SCR_LOAD 0x00000000
1111 #define SCR_SHL 0x01000000
1112 #define SCR_OR 0x02000000
1113 #define SCR_XOR 0x03000000
1114 #define SCR_AND 0x04000000
1115 #define SCR_SHR 0x05000000
1116 #define SCR_ADD 0x06000000
1117 #define SCR_ADDC 0x07000000
1118
1119 #define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
1120
1121 /*-----------------------------------------------------------
1122 **
1123 ** FROM_REG (reg) SFBR = reg
1124 ** << 0 >>
1125 **
1126 ** TO_REG (reg) reg = SFBR
1127 ** << 0 >>
1128 **
1129 ** LOAD_REG (reg, data) reg = <data>
1130 ** << 0 >>
1131 **
1132 ** LOAD_SFBR(data) SFBR = <data>
1133 ** << 0 >>
1134 **
1135 **-----------------------------------------------------------
1136 */
1137
1138 #define SCR_FROM_REG(reg) \
1139 SCR_REG_SFBR(reg,SCR_OR,0)
1140
1141 #define SCR_TO_REG(reg) \
1142 SCR_SFBR_REG(reg,SCR_OR,0)
1143
1144 #define SCR_LOAD_REG(reg,data) \
1145 SCR_REG_REG(reg,SCR_LOAD,data)
1146
1147 #define SCR_LOAD_SFBR(data) \
1148 (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
1149
1150 /*-----------------------------------------------------------
1151 **
1152 ** LOAD from memory to register.
1153 ** STORE from register to memory.
1154 **
1155 ** Only supported by 810A, 860, 825A, 875, 895 and 896.
1156 **
1157 **-----------------------------------------------------------
1158 **
1159 ** LOAD_ABS (LEN)
1160 ** <<start address>>
1161 **
1162 ** LOAD_REL (LEN) (DSA relative)
1163 ** <<dsa_offset>>
1164 **
1165 **-----------------------------------------------------------
1166 */
1167
1168 #define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
1169 #define SCR_NO_FLUSH2 0x02000000
1170 #define SCR_DSA_REL2 0x10000000
1171
1172 #define SCR_LOAD_R(reg, how, n) \
1173 (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
1174
1175 #define SCR_STORE_R(reg, how, n) \
1176 (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
1177
1178 #define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
1179 #define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
1180 #define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
1181 #define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
1182
1183 #define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
1184 #define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
1185 #define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
1186 #define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
1187
1188
1189 /*-----------------------------------------------------------
1190 **
1191 ** Waiting for Disconnect or Reselect
1192 **
1193 **-----------------------------------------------------------
1194 **
1195 ** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
1196 ** <<address>>
1197 **
1198 ** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
1199 ** <<distance>>
1200 **
1201 ** CALL [ | IFTRUE/IFFALSE ( ... ) ]
1202 ** <<address>>
1203 **
1204 ** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
1205 ** <<distance>>
1206 **
1207 ** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
1208 ** <<dummy>>
1209 **
1210 ** INT [ | IFTRUE/IFFALSE ( ... ) ]
1211 ** <<ident>>
1212 **
1213 ** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
1214 ** <<ident>>
1215 **
1216 ** Conditions:
1217 ** WHEN (phase)
1218 ** IF (phase)
1219 ** CARRYSET
1220 ** DATA (data, mask)
1221 **
1222 **-----------------------------------------------------------
1223 */
1224
1225 #define SCR_NO_OP 0x80000000
1226 #define SCR_JUMP 0x80080000
1227 #define SCR_JUMP64 0x80480000
1228 #define SCR_JUMPR 0x80880000
1229 #define SCR_CALL 0x88080000
1230 #define SCR_CALLR 0x88880000
1231 #define SCR_RETURN 0x90080000
1232 #define SCR_INT 0x98080000
1233 #define SCR_INT_FLY 0x98180000
1234
1235 #define IFFALSE(arg) (0x00080000 | (arg))
1236 #define IFTRUE(arg) (0x00000000 | (arg))
1237
1238 #define WHEN(phase) (0x00030000 | (phase))
1239 #define IF(phase) (0x00020000 | (phase))
1240
1241 #define DATA(D) (0x00040000 | ((D) & 0xff))
1242 #define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
1243
1244 #define CARRYSET (0x00200000)
1245
1246 /*-----------------------------------------------------------
1247 **
1248 ** SCSI constants.
1249 **
1250 **-----------------------------------------------------------
1251 */
1252
1253 /*
1254 ** Status
1255 */
1256
1257 #define S_GOOD (0x00)
1258 #define S_CHECK_COND (0x02)
1259 #define S_COND_MET (0x04)
1260 #define S_BUSY (0x08)
1261 #define S_INT (0x10)
1262 #define S_INT_COND_MET (0x14)
1263 #define S_CONFLICT (0x18)
1264 #define S_TERMINATED (0x20)
1265 #define S_QUEUE_FULL (0x28)
1266 #define S_ILLEGAL (0xff)
1267 #define S_SENSE (0x80)
1268
1269 /*
1270 * End of ncrreg from FreeBSD
1271 */
1272
1273 /*
1274 Build a scatter/gather entry.
1275 see sym53c8xx_2/sym_hipd.h for more detailed sym_build_sge()
1276 implementation ;)
1277 */
1278
1279 #define ncr_build_sge(np, data, badd, len) \
1280 do { \
1281 (data)->addr = cpu_to_scr(badd); \
1282 (data)->size = cpu_to_scr(len); \
1283 } while (0)
1284
1285 /*==========================================================
1286 **
1287 ** Structures used by the detection routine to transmit
1288 ** device configuration to the attach function.
1289 **
1290 **==========================================================
1291 */
1292 struct ncr_slot {
1293 u_long base;
1294 u_long base_2;
1295 u_long base_c;
1296 u_long base_2_c;
1297 void __iomem *base_v;
1298 void __iomem *base_2_v;
1299 int irq;
1300 /* port and reg fields to use INB, OUTB macros */
1301 volatile struct ncr_reg __iomem *reg;
1302 };
1303
1304 /*==========================================================
1305 **
1306 ** Structure used by detection routine to save data on
1307 ** each detected board for attach.
1308 **
1309 **==========================================================
1310 */
1311 struct ncr_device {
1312 struct device *dev;
1313 struct ncr_slot slot;
1314 struct ncr_chip chip;
1315 u_char host_id;
1316 u8 differential;
1317 };
1318
1319 extern struct Scsi_Host *ncr_attach(struct scsi_host_template *tpnt, int unit, struct ncr_device *device);
1320 extern void ncr53c8xx_release(struct Scsi_Host *host);
1321 irqreturn_t ncr53c8xx_intr(int irq, void *dev_id);
1322 extern int ncr53c8xx_init(void);
1323 extern void ncr53c8xx_exit(void);
1324
1325 #endif /* NCR53C8XX_H */
Linux with added FPC-III support