2 * Copyright (C) 2004 - 2010 Vladislav Bolkhovitin <vst@vlnb.net>
3 * Copyright (C) 2004 - 2005 Leonid Stoljar
4 * Copyright (C) 2006 Nathaniel Clark <nate@misrule.us>
5 * Copyright (C) 2007 - 2010 ID7 Ltd.
7 * Forward port and refactoring to modern qla2xxx and target/configfs
9 * Copyright (C) 2010-2011 Nicholas A. Bellinger <nab@kernel.org>
11 * Additional file for the target driver support.
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version 2
16 * of the License, or (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
24 * This is the global def file that is useful for including from the
28 #ifndef __QLA_TARGET_H
29 #define __QLA_TARGET_H
34 * Must be changed on any change in any initiator visible interfaces or
35 * data in the target add-on
37 #define QLA2XXX_TARGET_MAGIC 269
40 * Must be changed on any change in any target visible interfaces or
41 * data in the initiator
43 #define QLA2XXX_INITIATOR_MAGIC 57222
45 #define QLA2XXX_INI_MODE_STR_EXCLUSIVE "exclusive"
46 #define QLA2XXX_INI_MODE_STR_DISABLED "disabled"
47 #define QLA2XXX_INI_MODE_STR_ENABLED "enabled"
48 #define QLA2XXX_INI_MODE_STR_DUAL "dual"
50 #define QLA2XXX_INI_MODE_EXCLUSIVE 0
51 #define QLA2XXX_INI_MODE_DISABLED 1
52 #define QLA2XXX_INI_MODE_ENABLED 2
53 #define QLA2XXX_INI_MODE_DUAL 3
55 #define QLA2XXX_COMMAND_COUNT_INIT 250
56 #define QLA2XXX_IMMED_NOTIFY_COUNT_INIT 250
59 * Used to mark which completion handles (for RIO Status's) are for CTIO's
60 * vs. regular (non-target) info. This is checked for in
61 * qla2x00_process_response_queue() to see if a handle coming back in a
62 * multi-complete should come to the tgt driver or be handled there by qla2xxx
64 #define CTIO_COMPLETION_HANDLE_MARK BIT_29
65 #if (CTIO_COMPLETION_HANDLE_MARK <= DEFAULT_OUTSTANDING_COMMANDS)
66 #error "CTIO_COMPLETION_HANDLE_MARK not larger than "
67 "DEFAULT_OUTSTANDING_COMMANDS"
69 #define HANDLE_IS_CTIO_COMP(h) (h & CTIO_COMPLETION_HANDLE_MARK)
71 /* Used to mark CTIO as intermediate */
72 #define CTIO_INTERMEDIATE_HANDLE_MARK BIT_30
73 #define QLA_TGT_NULL_HANDLE 0
75 #define QLA_TGT_HANDLE_MASK 0xF0000000
76 #define QLA_QPID_HANDLE_MASK 0x00FF0000 /* qpair id mask */
77 #define QLA_CMD_HANDLE_MASK 0x0000FFFF
78 #define QLA_TGT_SKIP_HANDLE (0xFFFFFFFF & ~QLA_TGT_HANDLE_MASK)
80 #define QLA_QPID_HANDLE_SHIFT 16
81 #define GET_QID(_h) ((_h & QLA_QPID_HANDLE_MASK) >> QLA_QPID_HANDLE_SHIFT)
86 * ISP target entries - Flags bit definitions.
88 #define OF_SS_MODE_0 0
89 #define OF_SS_MODE_1 1
90 #define OF_SS_MODE_2 2
91 #define OF_SS_MODE_3 3
93 #define OF_EXPL_CONF BIT_5 /* Explicit Confirmation Requested */
94 #define OF_DATA_IN BIT_6 /* Data in to initiator */
95 /* (data from target to initiator) */
96 #define OF_DATA_OUT BIT_7 /* Data out from initiator */
97 /* (data from initiator to target) */
98 #define OF_NO_DATA (BIT_7 | BIT_6)
99 #define OF_INC_RC BIT_8 /* Increment command resource count */
100 #define OF_FAST_POST BIT_9 /* Enable mailbox fast posting. */
101 #define OF_CONF_REQ BIT_13 /* Confirmation Requested */
102 #define OF_TERM_EXCH BIT_14 /* Terminate exchange */
103 #define OF_SSTS BIT_15 /* Send SCSI status */
106 #ifndef QLA_TGT_DATASEGS_PER_CMD32
107 #define QLA_TGT_DATASEGS_PER_CMD32 3
108 #define QLA_TGT_DATASEGS_PER_CONT32 7
109 #define QLA_TGT_MAX_SG32(ql) \
110 (((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD32 + \
111 QLA_TGT_DATASEGS_PER_CONT32*((ql) - 1)) : 0)
113 #define QLA_TGT_DATASEGS_PER_CMD64 2
114 #define QLA_TGT_DATASEGS_PER_CONT64 5
115 #define QLA_TGT_MAX_SG64(ql) \
116 (((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD64 + \
117 QLA_TGT_DATASEGS_PER_CONT64*((ql) - 1)) : 0)
120 #ifndef QLA_TGT_DATASEGS_PER_CMD_24XX
121 #define QLA_TGT_DATASEGS_PER_CMD_24XX 1
122 #define QLA_TGT_DATASEGS_PER_CONT_24XX 5
123 #define QLA_TGT_MAX_SG_24XX(ql) \
124 (min(1270, ((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD_24XX + \
125 QLA_TGT_DATASEGS_PER_CONT_24XX*((ql) - 1)) : 0))
129 #define GET_TARGET_ID(ha, iocb) ((HAS_EXTENDED_IDS(ha)) \
130 ? le16_to_cpu((iocb)->u.isp2x.target.extended) \
131 : (uint16_t)(iocb)->u.isp2x.target.id.standard)
133 #ifndef NOTIFY_ACK_TYPE
134 #define NOTIFY_ACK_TYPE 0x0E /* Notify acknowledge entry. */
136 * ISP queue - notify acknowledge entry structure definition.
137 * This is sent to the ISP from the target driver.
140 uint8_t entry_type
; /* Entry type. */
141 uint8_t entry_count
; /* Entry count. */
142 uint8_t sys_define
; /* System defined. */
143 uint8_t entry_status
; /* Entry Status. */
146 uint32_t sys_define_2
; /* System defined. */
156 uint32_t srr_rel_offs
;
159 uint16_t srr_reject_code
;
160 uint8_t srr_reject_vendor_uniq
;
161 uint8_t srr_reject_code_expl
;
162 uint8_t reserved_2
[24];
166 uint16_t nport_handle
;
171 uint8_t status_subcode
;
173 uint32_t exchange_address
;
174 uint32_t srr_rel_offs
;
177 uint8_t reserved_4
[19];
179 uint8_t srr_reject_vendor_uniq
;
180 uint8_t srr_reject_code_expl
;
181 uint8_t srr_reject_code
;
182 uint8_t reserved_5
[5];
188 #define NOTIFY_ACK_FLAGS_TERMINATE BIT_3
189 #define NOTIFY_ACK_SRR_FLAGS_ACCEPT 0
190 #define NOTIFY_ACK_SRR_FLAGS_REJECT 1
192 #define NOTIFY_ACK_SRR_REJECT_REASON_UNABLE_TO_PERFORM 0x9
194 #define NOTIFY_ACK_SRR_FLAGS_REJECT_EXPL_NO_EXPL 0
195 #define NOTIFY_ACK_SRR_FLAGS_REJECT_EXPL_UNABLE_TO_SUPPLY_DATA 0x2a
197 #define NOTIFY_ACK_SUCCESS 0x01
200 #ifndef ACCEPT_TGT_IO_TYPE
201 #define ACCEPT_TGT_IO_TYPE 0x16 /* Accept target I/O entry. */
204 #ifndef CONTINUE_TGT_IO_TYPE
205 #define CONTINUE_TGT_IO_TYPE 0x17
207 * ISP queue - Continue Target I/O (CTIO) entry for status mode 0 structure.
208 * This structure is sent to the ISP 2xxx from target driver.
210 struct ctio_to_2xxx
{
211 uint8_t entry_type
; /* Entry type. */
212 uint8_t entry_count
; /* Entry count. */
213 uint8_t sys_define
; /* System defined. */
214 uint8_t entry_status
; /* Entry Status. */
215 uint32_t handle
; /* System defined handle */
220 uint16_t timeout
; /* 0 = 30 seconds, 0xFFFF = disable */
221 uint16_t dseg_count
; /* Data segment count. */
222 uint32_t relative_offset
;
224 uint16_t reserved_1
[3];
225 uint16_t scsi_status
;
226 uint32_t transfer_length
;
227 uint32_t dseg_0_address
; /* Data segment 0 address. */
228 uint32_t dseg_0_length
; /* Data segment 0 length. */
229 uint32_t dseg_1_address
; /* Data segment 1 address. */
230 uint32_t dseg_1_length
; /* Data segment 1 length. */
231 uint32_t dseg_2_address
; /* Data segment 2 address. */
232 uint32_t dseg_2_length
; /* Data segment 2 length. */
234 #define ATIO_PATH_INVALID 0x07
235 #define ATIO_CANT_PROV_CAP 0x16
236 #define ATIO_CDB_VALID 0x3D
238 #define ATIO_EXEC_READ BIT_1
239 #define ATIO_EXEC_WRITE BIT_0
242 #ifndef CTIO_A64_TYPE
243 #define CTIO_A64_TYPE 0x1F
244 #define CTIO_SUCCESS 0x01
245 #define CTIO_ABORTED 0x02
246 #define CTIO_INVALID_RX_ID 0x08
247 #define CTIO_TIMEOUT 0x0B
248 #define CTIO_DIF_ERROR 0x0C /* DIF error detected */
249 #define CTIO_LIP_RESET 0x0E
250 #define CTIO_TARGET_RESET 0x17
251 #define CTIO_PORT_UNAVAILABLE 0x28
252 #define CTIO_PORT_LOGGED_OUT 0x29
253 #define CTIO_PORT_CONF_CHANGED 0x2A
254 #define CTIO_SRR_RECEIVED 0x45
257 #ifndef CTIO_RET_TYPE
258 #define CTIO_RET_TYPE 0x17 /* CTIO return entry */
259 #define ATIO_TYPE7 0x06 /* Accept target I/O entry for 24xx */
291 #define F_CTL_EXCH_CONTEXT_RESP BIT_23
292 #define F_CTL_SEQ_CONTEXT_RESIP BIT_22
293 #define F_CTL_LAST_SEQ BIT_20
294 #define F_CTL_END_SEQ BIT_19
295 #define F_CTL_SEQ_INITIATIVE BIT_16
297 #define R_CTL_BASIC_LINK_SERV 0x80
298 #define R_CTL_B_ACC 0x4
299 #define R_CTL_B_RJT 0x5
301 struct atio7_fcp_cmnd
{
306 uint8_t task_mgmt_flags
;
307 #define FCP_CMND_TASK_MGMT_CLEAR_ACA 6
308 #define FCP_CMND_TASK_MGMT_TARGET_RESET 5
309 #define FCP_CMND_TASK_MGMT_LU_RESET 4
310 #define FCP_CMND_TASK_MGMT_CLEAR_TASK_SET 2
311 #define FCP_CMND_TASK_MGMT_ABORT_TASK_SET 1
314 uint8_t add_cdb_len
:6;
317 * add_cdb is optional and can absent from struct atio7_fcp_cmnd. Size 4
318 * only to make sizeof(struct atio7_fcp_cmnd) be as expected by
319 * BUILD_BUG_ON in qlt_init().
322 /* uint32_t data_length; */
326 * ISP queue - Accept Target I/O (ATIO) type entry IOCB structure.
327 * This is sent from the ISP to the target driver.
329 struct atio_from_isp
{
333 uint8_t sys_define
; /* System defined. */
334 uint8_t entry_status
; /* Entry Status. */
335 uint32_t sys_define_2
; /* System defined. */
343 uint8_t execution_codes
;
344 uint8_t cdb
[MAX_CMDSZ
];
345 uint32_t data_length
;
347 uint8_t initiator_port_name
[WWN_SIZE
]; /* on qla23xx */
348 uint16_t reserved_32
[6];
353 uint8_t fcp_cmnd_len_low
;
354 uint8_t fcp_cmnd_len_high
:4;
356 uint32_t exchange_addr
;
357 #define ATIO_EXCHANGE_ADDRESS_UNKNOWN 0xFFFFFFFF
358 struct fcp_hdr fcp_hdr
;
359 struct atio7_fcp_cmnd fcp_cmnd
;
362 uint8_t entry_type
; /* Entry type. */
363 uint8_t entry_count
; /* Entry count. */
364 __le16 attr_n_length
;
365 #define FCP_CMD_LENGTH_MASK 0x0fff
366 #define FCP_CMD_LENGTH_MIN 0x38
369 #define ATIO_PROCESSED 0xDEADDEAD /* Signature */
374 static inline int fcpcmd_is_corrupted(struct atio
*atio
)
376 if (atio
->entry_type
== ATIO_TYPE7
&&
377 (le16_to_cpu(atio
->attr_n_length
& FCP_CMD_LENGTH_MASK
) <
384 /* adjust corrupted atio so we won't trip over the same entry again. */
385 static inline void adjust_corrupted_atio(struct atio_from_isp
*atio
)
387 atio
->u
.raw
.attr_n_length
= cpu_to_le16(FCP_CMD_LENGTH_MIN
);
388 atio
->u
.isp24
.fcp_cmnd
.add_cdb_len
= 0;
391 static inline int get_datalen_for_atio(struct atio_from_isp
*atio
)
393 int len
= atio
->u
.isp24
.fcp_cmnd
.add_cdb_len
;
395 return (be32_to_cpu(get_unaligned((uint32_t *)
396 &atio
->u
.isp24
.fcp_cmnd
.add_cdb
[len
* 4])));
399 #define CTIO_TYPE7 0x12 /* Continue target I/O entry (for 24xx) */
402 * ISP queue - Continue Target I/O (ATIO) type 7 entry (for 24xx) structure.
403 * This structure is sent to the ISP 24xx from the target driver.
406 struct ctio7_to_24xx
{
407 uint8_t entry_type
; /* Entry type. */
408 uint8_t entry_count
; /* Entry count. */
409 uint8_t sys_define
; /* System defined. */
410 uint8_t entry_status
; /* Entry Status. */
411 uint32_t handle
; /* System defined handle */
412 uint16_t nport_handle
;
413 #define CTIO7_NHANDLE_UNRECOGNIZED 0xFFFF
415 uint16_t dseg_count
; /* Data segment count. */
418 uint8_t initiator_id
[3];
420 uint32_t exchange_addr
;
427 uint16_t scsi_status
;
428 uint32_t relative_offset
;
430 uint32_t transfer_length
;
432 /* Data segment 0 address. */
433 uint32_t dseg_0_address
[2];
434 /* Data segment 0 length. */
435 uint32_t dseg_0_length
;
438 uint16_t sense_length
;
442 uint16_t scsi_status
;
443 uint16_t response_len
;
445 uint8_t sense_data
[24];
451 * ISP queue - CTIO type 7 from ISP 24xx to target driver
452 * returned entry structure.
454 struct ctio7_from_24xx
{
455 uint8_t entry_type
; /* Entry type. */
456 uint8_t entry_count
; /* Entry count. */
457 uint8_t sys_define
; /* System defined. */
458 uint8_t entry_status
; /* Entry Status. */
459 uint32_t handle
; /* System defined handle */
462 uint16_t dseg_count
; /* Data segment count. */
464 uint8_t reserved1
[5];
465 uint32_t exchange_address
;
471 uint32_t relative_offset
;
472 uint8_t reserved4
[24];
475 /* CTIO7 flags values */
476 #define CTIO7_FLAGS_SEND_STATUS BIT_15
477 #define CTIO7_FLAGS_TERMINATE BIT_14
478 #define CTIO7_FLAGS_CONFORM_REQ BIT_13
479 #define CTIO7_FLAGS_DONT_RET_CTIO BIT_8
480 #define CTIO7_FLAGS_STATUS_MODE_0 0
481 #define CTIO7_FLAGS_STATUS_MODE_1 BIT_6
482 #define CTIO7_FLAGS_STATUS_MODE_2 BIT_7
483 #define CTIO7_FLAGS_EXPLICIT_CONFORM BIT_5
484 #define CTIO7_FLAGS_CONFIRM_SATISF BIT_4
485 #define CTIO7_FLAGS_DSD_PTR BIT_2
486 #define CTIO7_FLAGS_DATA_IN BIT_1 /* data to initiator */
487 #define CTIO7_FLAGS_DATA_OUT BIT_0 /* data from initiator */
489 #define ELS_PLOGI 0x3
490 #define ELS_FLOGI 0x4
492 #define ELS_PRLI 0x20
493 #define ELS_PRLO 0x21
494 #define ELS_TPRLO 0x24
495 #define ELS_PDISC 0x50
496 #define ELS_ADISC 0x52
499 *CTIO Type CRC_2 IOCB
501 struct ctio_crc2_to_fw
{
502 uint8_t entry_type
; /* Entry type. */
503 #define CTIO_CRC2 0x7A
504 uint8_t entry_count
; /* Entry count. */
505 uint8_t sys_define
; /* System defined. */
506 uint8_t entry_status
; /* Entry Status. */
508 uint32_t handle
; /* System handle. */
509 uint16_t nport_handle
; /* N_PORT handle. */
510 __le16 timeout
; /* Command timeout. */
512 uint16_t dseg_count
; /* Data segment count. */
514 uint8_t add_flags
; /* additional flags */
515 #define CTIO_CRC2_AF_DIF_DSD_ENA BIT_3
517 uint8_t initiator_id
[3]; /* initiator ID */
519 uint32_t exchange_addr
; /* rcv exchange address */
521 __le16 flags
; /* refer to CTIO7 flags values */
524 uint16_t scsi_status
;
525 __le32 relative_offset
;
527 __le32 transfer_length
; /* total fc transfer length */
529 __le32 crc_context_address
[2];/* Data segment address. */
530 uint16_t crc_context_len
; /* Data segment length. */
531 uint16_t reserved_1
; /* MUST be set to 0. */
534 /* CTIO Type CRC_x Status IOCB */
535 struct ctio_crc_from_fw
{
536 uint8_t entry_type
; /* Entry type. */
537 uint8_t entry_count
; /* Entry count. */
538 uint8_t sys_define
; /* System defined. */
539 uint8_t entry_status
; /* Entry Status. */
541 uint32_t handle
; /* System handle. */
543 uint16_t timeout
; /* Command timeout. */
544 uint16_t dseg_count
; /* Data segment count. */
546 uint16_t state_flags
;
547 #define CTIO_CRC_SF_DIF_CHOPPED BIT_4
549 uint32_t exchange_address
; /* rcv exchange address */
552 uint32_t resid_xfer_length
;
554 uint8_t reserved3
[12];
555 uint16_t runt_guard
; /* reported runt blk guard */
556 uint8_t actual_dif
[8];
557 uint8_t expected_dif
[8];
561 * ISP queue - ABTS received/response entries structure definition for 24xx.
563 #define ABTS_RECV_24XX 0x54 /* ABTS received (for 24xx) */
564 #define ABTS_RESP_24XX 0x55 /* ABTS responce (for 24xx) */
567 * ISP queue - ABTS received IOCB entry structure definition for 24xx.
568 * The ABTS BLS received from the wire is sent to the
569 * target driver by the ISP 24xx.
570 * The IOCB is placed on the response queue.
572 struct abts_recv_from_24xx
{
573 uint8_t entry_type
; /* Entry type. */
574 uint8_t entry_count
; /* Entry count. */
575 uint8_t sys_define
; /* System defined. */
576 uint8_t entry_status
; /* Entry Status. */
577 uint8_t reserved_1
[6];
578 uint16_t nport_handle
;
579 uint8_t reserved_2
[2];
581 uint8_t reserved_3
:4;
583 uint32_t exchange_address
;
584 struct fcp_hdr_le fcp_hdr_le
;
585 uint8_t reserved_4
[16];
586 uint32_t exchange_addr_to_abort
;
589 #define ABTS_PARAM_ABORT_SEQ BIT_0
594 uint8_t seq_id_valid
;
595 #define SEQ_ID_VALID 0x80
596 #define SEQ_ID_INVALID 0x00
599 uint16_t high_seq_cnt
;
600 uint16_t low_seq_cnt
;
607 #define BA_RJT_REASON_CODE_INVALID_COMMAND 0x1
608 #define BA_RJT_REASON_CODE_UNABLE_TO_PERFORM 0x9
613 * ISP queue - ABTS Response IOCB entry structure definition for 24xx.
614 * The ABTS response to the ABTS received is sent by the
615 * target driver to the ISP 24xx.
616 * The IOCB is placed on the request queue.
618 struct abts_resp_to_24xx
{
619 uint8_t entry_type
; /* Entry type. */
620 uint8_t entry_count
; /* Entry count. */
621 uint8_t sys_define
; /* System defined. */
622 uint8_t entry_status
; /* Entry Status. */
625 uint16_t nport_handle
;
626 uint16_t control_flags
;
627 #define ABTS_CONTR_FLG_TERM_EXCHG BIT_0
629 uint8_t reserved_3
:4;
631 uint32_t exchange_address
;
632 struct fcp_hdr_le fcp_hdr_le
;
634 struct ba_acc_le ba_acct
;
635 struct ba_rjt_le ba_rjt
;
638 uint32_t exchange_addr_to_abort
;
642 * ISP queue - ABTS Response IOCB from ISP24xx Firmware entry structure.
643 * The ABTS response with completion status to the ABTS response
644 * (sent by the target driver to the ISP 24xx) is sent by the
645 * ISP24xx firmware to the target driver.
646 * The IOCB is placed on the response queue.
648 struct abts_resp_from_24xx_fw
{
649 uint8_t entry_type
; /* Entry type. */
650 uint8_t entry_count
; /* Entry count. */
651 uint8_t sys_define
; /* System defined. */
652 uint8_t entry_status
; /* Entry Status. */
654 uint16_t compl_status
;
655 #define ABTS_RESP_COMPL_SUCCESS 0
656 #define ABTS_RESP_COMPL_SUBCODE_ERROR 0x31
657 uint16_t nport_handle
;
660 uint8_t reserved_3
:4;
662 uint32_t exchange_address
;
663 struct fcp_hdr_le fcp_hdr_le
;
664 uint8_t reserved_4
[8];
665 uint32_t error_subcode1
;
666 #define ABTS_RESP_SUBCODE_ERR_ABORTED_EXCH_NOT_TERM 0x1E
667 uint32_t error_subcode2
;
668 uint32_t exchange_addr_to_abort
;
671 /********************************************************************\
672 * Type Definitions used by initiator & target halves
673 \********************************************************************/
675 struct qla_tgt_mgmt_cmd
;
680 * This structure provides a template of function calls that the
681 * target driver (from within qla_target.c) can issue to the
682 * target module (tcm_qla2xxx).
684 struct qla_tgt_func_tmpl
{
685 struct qla_tgt_cmd
*(*find_cmd_by_tag
)(struct fc_port
*, uint64_t);
686 int (*handle_cmd
)(struct scsi_qla_host
*, struct qla_tgt_cmd
*,
687 unsigned char *, uint32_t, int, int, int);
688 void (*handle_data
)(struct qla_tgt_cmd
*);
689 int (*handle_tmr
)(struct qla_tgt_mgmt_cmd
*, u64
, uint16_t,
691 void (*free_cmd
)(struct qla_tgt_cmd
*);
692 void (*free_mcmd
)(struct qla_tgt_mgmt_cmd
*);
693 void (*free_session
)(struct fc_port
*);
695 int (*check_initiator_node_acl
)(struct scsi_qla_host
*, unsigned char *,
697 void (*update_sess
)(struct fc_port
*, port_id_t
, uint16_t, bool);
698 struct fc_port
*(*find_sess_by_loop_id
)(struct scsi_qla_host
*,
700 struct fc_port
*(*find_sess_by_s_id
)(struct scsi_qla_host
*,
702 void (*clear_nacl_from_fcport_map
)(struct fc_port
*);
703 void (*put_sess
)(struct fc_port
*);
704 void (*shutdown_sess
)(struct fc_port
*);
705 int (*get_dif_tags
)(struct qla_tgt_cmd
*cmd
, uint16_t *pfw_prot_opts
);
706 int (*chk_dif_tags
)(uint32_t tag
);
707 void (*add_target
)(struct scsi_qla_host
*);
708 void (*remove_target
)(struct scsi_qla_host
*);
711 int qla2x00_wait_for_hba_online(struct scsi_qla_host
*);
713 #include <target/target_core_base.h>
715 #define QLA_TGT_TIMEOUT 10 /* in seconds */
717 #define QLA_TGT_MAX_HW_PENDING_TIME 60 /* in seconds */
719 /* Immediate notify status constants */
720 #define IMM_NTFY_LIP_RESET 0x000E
721 #define IMM_NTFY_LIP_LINK_REINIT 0x000F
722 #define IMM_NTFY_IOCB_OVERFLOW 0x0016
723 #define IMM_NTFY_ABORT_TASK 0x0020
724 #define IMM_NTFY_PORT_LOGOUT 0x0029
725 #define IMM_NTFY_PORT_CONFIG 0x002A
726 #define IMM_NTFY_GLBL_TPRLO 0x002D
727 #define IMM_NTFY_GLBL_LOGO 0x002E
728 #define IMM_NTFY_RESOURCE 0x0034
729 #define IMM_NTFY_MSG_RX 0x0036
730 #define IMM_NTFY_SRR 0x0045
731 #define IMM_NTFY_ELS 0x0046
733 /* Immediate notify task flags */
734 #define IMM_NTFY_TASK_MGMT_SHIFT 8
736 #define QLA_TGT_CLEAR_ACA 0x40
737 #define QLA_TGT_TARGET_RESET 0x20
738 #define QLA_TGT_LUN_RESET 0x10
739 #define QLA_TGT_CLEAR_TS 0x04
740 #define QLA_TGT_ABORT_TS 0x02
741 #define QLA_TGT_ABORT_ALL_SESS 0xFFFF
742 #define QLA_TGT_ABORT_ALL 0xFFFE
743 #define QLA_TGT_NEXUS_LOSS_SESS 0xFFFD
744 #define QLA_TGT_NEXUS_LOSS 0xFFFC
745 #define QLA_TGT_ABTS 0xFFFB
746 #define QLA_TGT_2G_ABORT_TASK 0xFFFA
748 /* Notify Acknowledge flags */
749 #define NOTIFY_ACK_RES_COUNT BIT_8
750 #define NOTIFY_ACK_CLEAR_LIP_RESET BIT_5
751 #define NOTIFY_ACK_TM_RESP_CODE_VALID BIT_4
753 /* Command's states */
754 #define QLA_TGT_STATE_NEW 0 /* New command + target processing */
755 #define QLA_TGT_STATE_NEED_DATA 1 /* target needs data to continue */
756 #define QLA_TGT_STATE_DATA_IN 2 /* Data arrived + target processing */
757 #define QLA_TGT_STATE_PROCESSED 3 /* target done processing */
759 /* ATIO task_codes field */
760 #define ATIO_SIMPLE_QUEUE 0
761 #define ATIO_HEAD_OF_QUEUE 1
762 #define ATIO_ORDERED_QUEUE 2
763 #define ATIO_ACA_QUEUE 4
764 #define ATIO_UNTAGGED 5
766 /* TM failed response codes, see FCP (9.4.11 FCP_RSP_INFO) */
767 #define FC_TM_SUCCESS 0
768 #define FC_TM_BAD_FCP_DATA 1
769 #define FC_TM_BAD_CMD 2
770 #define FC_TM_FCP_DATA_MISMATCH 3
771 #define FC_TM_REJECT 4
772 #define FC_TM_FAILED 5
774 #if (BITS_PER_LONG > 32) || defined(CONFIG_HIGHMEM64G)
775 #define pci_dma_lo32(a) (a & 0xffffffff)
776 #define pci_dma_hi32(a) ((((a) >> 16)>>16) & 0xffffffff)
778 #define pci_dma_lo32(a) (a & 0xffffffff)
779 #define pci_dma_hi32(a) 0
782 #define QLA_TGT_SENSE_VALID(sense) ((sense != NULL) && \
783 (((const uint8_t *)(sense))[0] & 0x70) == 0x70)
785 struct qla_port_24xx_data
{
786 uint8_t port_name
[WWN_SIZE
];
791 struct qla_qpair_hint
{
792 struct list_head hint_elem
;
793 struct qla_qpair
*qpair
;
799 struct scsi_qla_host
*vha
;
800 struct qla_hw_data
*ha
;
801 struct btree_head64 lun_qpair_map
;
802 struct qla_qpair_hint
*qphints
;
804 * To sync between IRQ handlers and qlt_target_release(). Needed,
805 * because req_pkt() can drop/reaquire HW lock inside. Protected by
808 int atio_irq_cmd_count
;
812 /* Target's flags, serialized by pha->hardware_lock */
813 unsigned int link_reinit_iocb_pending
:1;
816 * Protected by tgt_mutex AND hardware_lock for writing and tgt_mutex
817 * OR hardware_lock for reading.
819 int tgt_stop
; /* the target mode driver is being stopped */
820 int tgt_stopped
; /* the target mode driver has been stopped */
822 /* Count of sessions refering qla_tgt. Protected by hardware_lock. */
825 /* Protected by hardware_lock */
826 struct list_head del_sess_list
;
828 spinlock_t sess_work_lock
;
829 struct list_head sess_works_list
;
830 struct work_struct sess_work
;
832 struct imm_ntfy_from_isp link_reinit_iocb
;
833 wait_queue_head_t waitQ
;
834 int notify_ack_expected
;
835 int abts_resp_expected
;
836 int modify_lun_expected
;
837 atomic_t tgt_global_resets_count
;
838 struct list_head tgt_list_entry
;
841 struct qla_tgt_sess_op
{
842 struct scsi_qla_host
*vha
;
844 struct atio_from_isp atio
;
845 struct work_struct work
;
846 struct list_head cmd_list
;
854 TRC_DO_WORK_ERR
= BIT_2
,
856 TRC_XMIT_DATA
= BIT_4
,
857 TRC_XMIT_STATUS
= BIT_5
,
859 TRC_SRR_XRDY
= BIT_7
,
860 TRC_SRR_TERM
= BIT_8
,
861 TRC_SRR_CTIO
= BIT_9
,
863 TRC_CTIO_ERR
= BIT_11
,
864 TRC_CTIO_DONE
= BIT_12
,
865 TRC_CTIO_ABORTED
= BIT_13
,
866 TRC_CTIO_STRANGE
= BIT_14
,
867 TRC_CMD_DONE
= BIT_15
,
868 TRC_CMD_CHK_STOP
= BIT_16
,
869 TRC_CMD_FREE
= BIT_17
,
870 TRC_DATA_IN
= BIT_18
,
872 TRC_DIF_ERR
= BIT_20
,
877 * Do not move cmd_type field. it needs to line up with srb->cmd_type
881 struct se_cmd se_cmd
;
882 struct fc_port
*sess
;
883 struct qla_qpair
*qpair
;
884 uint32_t reset_count
;
886 struct work_struct work
;
887 /* Sense buffer that will be mapped into outgoing status */
888 unsigned char sense_buffer
[TRANSPORT_SENSE_BUFFER
];
891 /* to save extra sess dereferences */
892 unsigned int conf_compl_supported
:1;
893 unsigned int sg_mapped
:1;
894 unsigned int free_sg
:1;
895 unsigned int write_data_transferred
:1;
896 unsigned int q_full
:1;
897 unsigned int term_exchg
:1;
898 unsigned int cmd_sent_to_fw
:1;
899 unsigned int cmd_in_wq
:1;
900 unsigned int aborted
:1;
901 unsigned int data_work
:1;
902 unsigned int data_work_free
:1;
904 struct scatterlist
*sg
; /* cmd data buffer SG vector */
905 int sg_cnt
; /* SG segments count */
906 int bufflen
; /* cmd buffer length */
909 enum dma_data_direction dma_data_direction
;
912 uint16_t loop_id
; /* to save extra sess dereferences */
913 struct qla_tgt
*tgt
; /* to save extra sess dereferences */
914 struct scsi_qla_host
*vha
;
915 struct list_head cmd_list
;
917 struct atio_from_isp atio
;
919 uint8_t ctx_dsd_alloced
;
922 #define DIF_ERR_NONE 0
923 #define DIF_ERR_GRD 1
924 #define DIF_ERR_REF 2
925 #define DIF_ERR_APP 3
927 struct scatterlist
*prot_sg
;
928 uint32_t prot_sg_cnt
;
929 uint32_t blk_sz
, num_blks
;
930 uint8_t scsi_status
, sense_key
, asc
, ascq
;
932 struct crc_context
*ctx
;
935 uint16_t a_guard
, e_guard
, a_app_tag
, e_app_tag
;
936 uint32_t a_ref_tag
, e_ref_tag
;
938 uint64_t jiffies_at_alloc
;
939 uint64_t jiffies_at_free
;
941 enum trace_flags trc_flags
;
944 struct qla_tgt_sess_work_param
{
945 struct list_head sess_works_list_entry
;
947 #define QLA_TGT_SESS_WORK_ABORT 1
948 #define QLA_TGT_SESS_WORK_TM 2
952 struct abts_recv_from_24xx abts
;
953 struct imm_ntfy_from_isp tm_iocb
;
954 struct atio_from_isp tm_iocb2
;
958 struct qla_tgt_mgmt_cmd
{
961 struct fc_port
*sess
;
962 struct qla_qpair
*qpair
;
963 struct scsi_qla_host
*vha
;
964 struct se_cmd se_cmd
;
965 struct work_struct free_work
;
967 uint32_t reset_count
;
968 #define QLA24XX_MGMT_SEND_NACK 1
969 struct work_struct work
;
970 uint64_t unpacked_lun
;
972 struct atio_from_isp atio
;
973 struct imm_ntfy_from_isp imm_ntfy
;
974 struct abts_recv_from_24xx abts
;
975 } __packed orig_iocb
;
979 struct qla_tgt_cmd
*cmd
;
982 struct scatterlist
*sg
; /* cmd data buffer SG vector */
983 unsigned char *sense_buffer
;
987 int sense_buffer_len
;
991 struct scatterlist
*prot_sg
;
992 uint16_t prot_seg_cnt
;
996 /* Check for Switch reserved address */
997 #define IS_SW_RESV_ADDR(_s_id) \
998 ((_s_id.b.domain == 0xff) && ((_s_id.b.area & 0xf0) == 0xf0))
1000 #define QLA_TGT_XMIT_DATA 1
1001 #define QLA_TGT_XMIT_STATUS 2
1002 #define QLA_TGT_XMIT_ALL (QLA_TGT_XMIT_STATUS|QLA_TGT_XMIT_DATA)
1005 extern struct qla_tgt_data qla_target
;
1008 * Function prototypes for qla_target.c logic used by qla2xxx LLD code.
1010 extern int qlt_add_target(struct qla_hw_data
*, struct scsi_qla_host
*);
1011 extern int qlt_remove_target(struct qla_hw_data
*, struct scsi_qla_host
*);
1012 extern int qlt_lport_register(void *, u64
, u64
, u64
,
1013 int (*callback
)(struct scsi_qla_host
*, void *, u64
, u64
));
1014 extern void qlt_lport_deregister(struct scsi_qla_host
*);
1015 extern void qlt_unreg_sess(struct fc_port
*);
1016 extern void qlt_fc_port_added(struct scsi_qla_host
*, fc_port_t
*);
1017 extern void qlt_fc_port_deleted(struct scsi_qla_host
*, fc_port_t
*, int);
1018 extern int __init
qlt_init(void);
1019 extern void qlt_exit(void);
1020 extern void qlt_update_vp_map(struct scsi_qla_host
*, int);
1021 extern void qlt_free_session_done(struct work_struct
*);
1023 * This macro is used during early initializations when host->active_mode
1024 * is not set. Right now, ha value is ignored.
1026 #define QLA_TGT_MODE_ENABLED() (ql2x_ini_mode != QLA2XXX_INI_MODE_ENABLED)
1028 extern int ql2x_ini_mode
;
1030 static inline bool qla_tgt_mode_enabled(struct scsi_qla_host
*ha
)
1032 return ha
->host
->active_mode
== MODE_TARGET
;
1035 static inline bool qla_ini_mode_enabled(struct scsi_qla_host
*ha
)
1037 return ha
->host
->active_mode
== MODE_INITIATOR
;
1040 static inline bool qla_dual_mode_enabled(struct scsi_qla_host
*ha
)
1042 return (ha
->host
->active_mode
== MODE_DUAL
);
1045 static inline uint32_t sid_to_key(const uint8_t *s_id
)
1049 key
= (((unsigned long)s_id
[0] << 16) |
1050 ((unsigned long)s_id
[1] << 8) |
1051 (unsigned long)s_id
[2]);
1055 static inline void sid_to_portid(const uint8_t *s_id
, port_id_t
*p
)
1057 memset(p
, 0, sizeof(*p
));
1058 p
->b
.domain
= s_id
[0];
1059 p
->b
.area
= s_id
[1];
1060 p
->b
.al_pa
= s_id
[2];
1064 * Exported symbols from qla_target.c LLD logic used by qla2xxx code..
1066 extern void qlt_response_pkt_all_vps(struct scsi_qla_host
*, struct rsp_que
*,
1068 extern int qlt_rdy_to_xfer(struct qla_tgt_cmd
*);
1069 extern int qlt_xmit_response(struct qla_tgt_cmd
*, int, uint8_t);
1070 extern int qlt_abort_cmd(struct qla_tgt_cmd
*);
1071 extern void qlt_xmit_tm_rsp(struct qla_tgt_mgmt_cmd
*);
1072 extern void qlt_free_mcmd(struct qla_tgt_mgmt_cmd
*);
1073 extern void qlt_free_cmd(struct qla_tgt_cmd
*cmd
);
1074 extern void qlt_async_event(uint16_t, struct scsi_qla_host
*, uint16_t *);
1075 extern void qlt_enable_vha(struct scsi_qla_host
*);
1076 extern void qlt_vport_create(struct scsi_qla_host
*, struct qla_hw_data
*);
1077 extern u8
qlt_rff_id(struct scsi_qla_host
*);
1078 extern void qlt_init_atio_q_entries(struct scsi_qla_host
*);
1079 extern void qlt_24xx_process_atio_queue(struct scsi_qla_host
*, uint8_t);
1080 extern void qlt_24xx_config_rings(struct scsi_qla_host
*);
1081 extern void qlt_24xx_config_nvram_stage1(struct scsi_qla_host
*,
1082 struct nvram_24xx
*);
1083 extern void qlt_24xx_config_nvram_stage2(struct scsi_qla_host
*,
1084 struct init_cb_24xx
*);
1085 extern void qlt_81xx_config_nvram_stage2(struct scsi_qla_host
*,
1086 struct init_cb_81xx
*);
1087 extern void qlt_81xx_config_nvram_stage1(struct scsi_qla_host
*,
1088 struct nvram_81xx
*);
1089 extern int qlt_24xx_process_response_error(struct scsi_qla_host
*,
1090 struct sts_entry_24xx
*);
1091 extern void qlt_modify_vp_config(struct scsi_qla_host
*,
1092 struct vp_config_entry_24xx
*);
1093 extern void qlt_probe_one_stage1(struct scsi_qla_host
*, struct qla_hw_data
*);
1094 extern int qlt_mem_alloc(struct qla_hw_data
*);
1095 extern void qlt_mem_free(struct qla_hw_data
*);
1096 extern int qlt_stop_phase1(struct qla_tgt
*);
1097 extern void qlt_stop_phase2(struct qla_tgt
*);
1098 extern irqreturn_t
qla83xx_msix_atio_q(int, void *);
1099 extern void qlt_83xx_iospace_config(struct qla_hw_data
*);
1100 extern int qlt_free_qfull_cmds(struct qla_qpair
*);
1101 extern void qlt_logo_completion_handler(fc_port_t
*, int);
1102 extern void qlt_do_generation_tick(struct scsi_qla_host
*, int *);
1104 void qlt_send_resp_ctio(struct qla_qpair
*, struct qla_tgt_cmd
*, uint8_t,
1105 uint8_t, uint8_t, uint8_t);
1106 extern void qlt_abort_cmd_on_host_reset(struct scsi_qla_host
*,
1107 struct qla_tgt_cmd
*);
1109 #endif /* __QLA_TARGET_H */