2 * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
4 * Srinivas Kandagatla <srinivas.kandagatla@st.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/slab.h>
14 #include <linux/err.h>
17 #include <linux/of_irq.h>
18 #include <linux/of_gpio.h>
19 #include <linux/of_address.h>
20 #include <linux/regmap.h>
21 #include <linux/mfd/syscon.h>
22 #include <linux/pinctrl/pinctrl.h>
23 #include <linux/pinctrl/pinmux.h>
24 #include <linux/pinctrl/pinconf.h>
25 #include <linux/platform_device.h>
28 /* PIO Block registers */
30 #define REG_PIO_POUT 0x00
31 /* Set bits of POUT */
32 #define REG_PIO_SET_POUT 0x04
33 /* Clear bits of POUT */
34 #define REG_PIO_CLR_POUT 0x08
36 #define REG_PIO_PIN 0x10
37 /* PIO configuration */
38 #define REG_PIO_PC(n) (0x20 + (n) * 0x10)
39 /* Set bits of PC[2:0] */
40 #define REG_PIO_SET_PC(n) (0x24 + (n) * 0x10)
41 /* Clear bits of PC[2:0] */
42 #define REG_PIO_CLR_PC(n) (0x28 + (n) * 0x10)
43 /* PIO input comparison */
44 #define REG_PIO_PCOMP 0x50
45 /* Set bits of PCOMP */
46 #define REG_PIO_SET_PCOMP 0x54
47 /* Clear bits of PCOMP */
48 #define REG_PIO_CLR_PCOMP 0x58
49 /* PIO input comparison mask */
50 #define REG_PIO_PMASK 0x60
51 /* Set bits of PMASK */
52 #define REG_PIO_SET_PMASK 0x64
53 /* Clear bits of PMASK */
54 #define REG_PIO_CLR_PMASK 0x68
56 #define ST_GPIO_DIRECTION_BIDIR 0x1
57 #define ST_GPIO_DIRECTION_OUT 0x2
58 #define ST_GPIO_DIRECTION_IN 0x4
61 * Packed style retime configuration.
62 * There are two registers cfg0 and cfg1 in this style for each bank.
63 * Each field in this register is 8 bit corresponding to 8 pins in the bank.
65 #define RT_P_CFGS_PER_BANK 2
66 #define RT_P_CFG0_CLK1NOTCLK0_FIELD(reg) REG_FIELD(reg, 0, 7)
67 #define RT_P_CFG0_DELAY_0_FIELD(reg) REG_FIELD(reg, 16, 23)
68 #define RT_P_CFG0_DELAY_1_FIELD(reg) REG_FIELD(reg, 24, 31)
69 #define RT_P_CFG1_INVERTCLK_FIELD(reg) REG_FIELD(reg, 0, 7)
70 #define RT_P_CFG1_RETIME_FIELD(reg) REG_FIELD(reg, 8, 15)
71 #define RT_P_CFG1_CLKNOTDATA_FIELD(reg) REG_FIELD(reg, 16, 23)
72 #define RT_P_CFG1_DOUBLE_EDGE_FIELD(reg) REG_FIELD(reg, 24, 31)
75 * Dedicated style retime Configuration register
76 * each register is dedicated per pin.
78 #define RT_D_CFGS_PER_BANK 8
79 #define RT_D_CFG_CLK_SHIFT 0
80 #define RT_D_CFG_CLK_MASK (0x3 << 0)
81 #define RT_D_CFG_CLKNOTDATA_SHIFT 2
82 #define RT_D_CFG_CLKNOTDATA_MASK BIT(2)
83 #define RT_D_CFG_DELAY_SHIFT 3
84 #define RT_D_CFG_DELAY_MASK (0xf << 3)
85 #define RT_D_CFG_DELAY_INNOTOUT_SHIFT 7
86 #define RT_D_CFG_DELAY_INNOTOUT_MASK BIT(7)
87 #define RT_D_CFG_DOUBLE_EDGE_SHIFT 8
88 #define RT_D_CFG_DOUBLE_EDGE_MASK BIT(8)
89 #define RT_D_CFG_INVERTCLK_SHIFT 9
90 #define RT_D_CFG_INVERTCLK_MASK BIT(9)
91 #define RT_D_CFG_RETIME_SHIFT 10
92 #define RT_D_CFG_RETIME_MASK BIT(10)
95 * Pinconf is represented in an opaque unsigned long variable.
96 * Below is the bit allocation details for each possible configuration.
97 * All the bit fields can be encapsulated into four variables
98 * (direction, retime-type, retime-clk, retime-delay)
101 *[31:28]| reserved-3 |
102 * +----------------+-------------
104 * +----------------+ v
105 *[26] | pu | [Direction ]
106 * +----------------+ ^
108 * +----------------+-------------
110 * +----------------+-------------
112 * +----------------+ |
113 *[22] | retime-invclk | |
114 * +----------------+ v
115 *[21] |retime-clknotdat| [Retime-type ]
116 * +----------------+ ^
117 *[20] | retime-de | |
118 * +----------------+-------------
119 *[19:18]| retime-clk |------>[Retime-Clk ]
121 *[17:16]| reserved-1 |
123 *[15..0]| retime-delay |------>[Retime Delay]
127 #define ST_PINCONF_UNPACK(conf, param)\
128 ((conf >> ST_PINCONF_ ##param ##_SHIFT) \
129 & ST_PINCONF_ ##param ##_MASK)
131 #define ST_PINCONF_PACK(conf, val, param) (conf |=\
132 ((val & ST_PINCONF_ ##param ##_MASK) << \
133 ST_PINCONF_ ##param ##_SHIFT))
136 #define ST_PINCONF_OE_MASK 0x1
137 #define ST_PINCONF_OE_SHIFT 27
138 #define ST_PINCONF_OE BIT(27)
139 #define ST_PINCONF_UNPACK_OE(conf) ST_PINCONF_UNPACK(conf, OE)
140 #define ST_PINCONF_PACK_OE(conf) ST_PINCONF_PACK(conf, 1, OE)
143 #define ST_PINCONF_PU_MASK 0x1
144 #define ST_PINCONF_PU_SHIFT 26
145 #define ST_PINCONF_PU BIT(26)
146 #define ST_PINCONF_UNPACK_PU(conf) ST_PINCONF_UNPACK(conf, PU)
147 #define ST_PINCONF_PACK_PU(conf) ST_PINCONF_PACK(conf, 1, PU)
150 #define ST_PINCONF_OD_MASK 0x1
151 #define ST_PINCONF_OD_SHIFT 25
152 #define ST_PINCONF_OD BIT(25)
153 #define ST_PINCONF_UNPACK_OD(conf) ST_PINCONF_UNPACK(conf, OD)
154 #define ST_PINCONF_PACK_OD(conf) ST_PINCONF_PACK(conf, 1, OD)
156 #define ST_PINCONF_RT_MASK 0x1
157 #define ST_PINCONF_RT_SHIFT 23
158 #define ST_PINCONF_RT BIT(23)
159 #define ST_PINCONF_UNPACK_RT(conf) ST_PINCONF_UNPACK(conf, RT)
160 #define ST_PINCONF_PACK_RT(conf) ST_PINCONF_PACK(conf, 1, RT)
162 #define ST_PINCONF_RT_INVERTCLK_MASK 0x1
163 #define ST_PINCONF_RT_INVERTCLK_SHIFT 22
164 #define ST_PINCONF_RT_INVERTCLK BIT(22)
165 #define ST_PINCONF_UNPACK_RT_INVERTCLK(conf) \
166 ST_PINCONF_UNPACK(conf, RT_INVERTCLK)
167 #define ST_PINCONF_PACK_RT_INVERTCLK(conf) \
168 ST_PINCONF_PACK(conf, 1, RT_INVERTCLK)
170 #define ST_PINCONF_RT_CLKNOTDATA_MASK 0x1
171 #define ST_PINCONF_RT_CLKNOTDATA_SHIFT 21
172 #define ST_PINCONF_RT_CLKNOTDATA BIT(21)
173 #define ST_PINCONF_UNPACK_RT_CLKNOTDATA(conf) \
174 ST_PINCONF_UNPACK(conf, RT_CLKNOTDATA)
175 #define ST_PINCONF_PACK_RT_CLKNOTDATA(conf) \
176 ST_PINCONF_PACK(conf, 1, RT_CLKNOTDATA)
178 #define ST_PINCONF_RT_DOUBLE_EDGE_MASK 0x1
179 #define ST_PINCONF_RT_DOUBLE_EDGE_SHIFT 20
180 #define ST_PINCONF_RT_DOUBLE_EDGE BIT(20)
181 #define ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(conf) \
182 ST_PINCONF_UNPACK(conf, RT_DOUBLE_EDGE)
183 #define ST_PINCONF_PACK_RT_DOUBLE_EDGE(conf) \
184 ST_PINCONF_PACK(conf, 1, RT_DOUBLE_EDGE)
186 #define ST_PINCONF_RT_CLK_MASK 0x3
187 #define ST_PINCONF_RT_CLK_SHIFT 18
188 #define ST_PINCONF_RT_CLK BIT(18)
189 #define ST_PINCONF_UNPACK_RT_CLK(conf) ST_PINCONF_UNPACK(conf, RT_CLK)
190 #define ST_PINCONF_PACK_RT_CLK(conf, val) ST_PINCONF_PACK(conf, val, RT_CLK)
192 /* RETIME_DELAY in Pico Secs */
193 #define ST_PINCONF_RT_DELAY_MASK 0xffff
194 #define ST_PINCONF_RT_DELAY_SHIFT 0
195 #define ST_PINCONF_UNPACK_RT_DELAY(conf) ST_PINCONF_UNPACK(conf, RT_DELAY)
196 #define ST_PINCONF_PACK_RT_DELAY(conf, val) \
197 ST_PINCONF_PACK(conf, val, RT_DELAY)
199 #define ST_GPIO_PINS_PER_BANK (8)
200 #define OF_GPIO_ARGS_MIN (4)
201 #define OF_RT_ARGS_MIN (2)
203 #define gpio_range_to_bank(chip) \
204 container_of(chip, struct st_gpio_bank, range)
206 #define pc_to_bank(pc) \
207 container_of(pc, struct st_gpio_bank, pc)
209 enum st_retime_style
{
210 st_retime_style_none
,
211 st_retime_style_packed
,
212 st_retime_style_dedicated
,
215 struct st_retime_dedicated
{
216 struct regmap_field
*rt
[ST_GPIO_PINS_PER_BANK
];
219 struct st_retime_packed
{
220 struct regmap_field
*clk1notclk0
;
221 struct regmap_field
*delay_0
;
222 struct regmap_field
*delay_1
;
223 struct regmap_field
*invertclk
;
224 struct regmap_field
*retime
;
225 struct regmap_field
*clknotdata
;
226 struct regmap_field
*double_edge
;
229 struct st_pio_control
{
231 struct regmap_field
*alt
, *oe
, *pu
, *od
;
234 struct st_retime_packed rt_p
;
235 struct st_retime_dedicated rt_d
;
239 struct st_pctl_data
{
240 const enum st_retime_style rt_style
;
241 const unsigned int *input_delays
;
242 const int ninput_delays
;
243 const unsigned int *output_delays
;
244 const int noutput_delays
;
245 /* register offset information */
246 const int alt
, oe
, pu
, od
, rt
;
252 unsigned long config
;
262 struct st_pctl_group
{
266 struct st_pinconf
*pin_conf
;
270 * Edge triggers are not supported at hardware level, it is supported by
271 * software by exploiting the level trigger support in hardware.
272 * Software uses a virtual register (EDGE_CONF) for edge trigger configuration
273 * of each gpio pin in a GPIO bank.
275 * Each bank has a 32 bit EDGE_CONF register which is divided in to 8 parts of
276 * 4-bits. Each 4-bit space is allocated for each pin in a gpio bank.
278 * bit allocation per pin is:
279 * Bits: [0 - 3] | [4 - 7] [8 - 11] ... ... ... ... [ 28 - 31]
280 * --------------------------------------------------------
281 * | pin-0 | pin-2 | pin-3 | ... ... ... ... | pin -7 |
282 * --------------------------------------------------------
284 * A pin can have one of following the values in its edge configuration field.
286 * ------- ----------------------------
287 * [0-3] - Description
288 * ------- ----------------------------
289 * 0000 - No edge IRQ.
290 * 0001 - Falling edge IRQ.
291 * 0010 - Rising edge IRQ.
292 * 0011 - Rising and Falling edge IRQ.
293 * ------- ----------------------------
296 #define ST_IRQ_EDGE_CONF_BITS_PER_PIN 4
297 #define ST_IRQ_EDGE_MASK 0xf
298 #define ST_IRQ_EDGE_FALLING BIT(0)
299 #define ST_IRQ_EDGE_RISING BIT(1)
300 #define ST_IRQ_EDGE_BOTH (BIT(0) | BIT(1))
302 #define ST_IRQ_RISING_EDGE_CONF(pin) \
303 (ST_IRQ_EDGE_RISING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
305 #define ST_IRQ_FALLING_EDGE_CONF(pin) \
306 (ST_IRQ_EDGE_FALLING << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
308 #define ST_IRQ_BOTH_EDGE_CONF(pin) \
309 (ST_IRQ_EDGE_BOTH << (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN))
311 #define ST_IRQ_EDGE_CONF(conf, pin) \
312 (conf >> (pin * ST_IRQ_EDGE_CONF_BITS_PER_PIN) & ST_IRQ_EDGE_MASK)
314 struct st_gpio_bank
{
315 struct gpio_chip gpio_chip
;
316 struct pinctrl_gpio_range range
;
318 struct st_pio_control pc
;
319 unsigned long irq_edge_conf
;
325 struct pinctrl_dev
*pctl
;
326 struct st_gpio_bank
*banks
;
328 struct st_pmx_func
*functions
;
330 struct st_pctl_group
*groups
;
332 struct regmap
*regmap
;
333 const struct st_pctl_data
*data
;
334 void __iomem
*irqmux_base
;
337 /* SOC specific data */
339 static const unsigned int stih407_delays
[] = {0, 300, 500, 750, 1000, 1250,
340 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250 };
342 static const struct st_pctl_data stih407_data
= {
343 .rt_style
= st_retime_style_dedicated
,
344 .input_delays
= stih407_delays
,
345 .ninput_delays
= ARRAY_SIZE(stih407_delays
),
346 .output_delays
= stih407_delays
,
347 .noutput_delays
= ARRAY_SIZE(stih407_delays
),
348 .alt
= 0, .oe
= 40, .pu
= 50, .od
= 60, .rt
= 100,
351 static const struct st_pctl_data stih407_flashdata
= {
352 .rt_style
= st_retime_style_none
,
353 .input_delays
= stih407_delays
,
354 .ninput_delays
= ARRAY_SIZE(stih407_delays
),
355 .output_delays
= stih407_delays
,
356 .noutput_delays
= ARRAY_SIZE(stih407_delays
),
358 .oe
= -1, /* Not Available */
359 .pu
= -1, /* Not Available */
364 static struct st_pio_control
*st_get_pio_control(
365 struct pinctrl_dev
*pctldev
, int pin
)
367 struct pinctrl_gpio_range
*range
=
368 pinctrl_find_gpio_range_from_pin(pctldev
, pin
);
369 struct st_gpio_bank
*bank
= gpio_range_to_bank(range
);
374 /* Low level functions.. */
375 static inline int st_gpio_bank(int gpio
)
377 return gpio
/ST_GPIO_PINS_PER_BANK
;
380 static inline int st_gpio_pin(int gpio
)
382 return gpio
%ST_GPIO_PINS_PER_BANK
;
385 static void st_pinconf_set_config(struct st_pio_control
*pc
,
386 int pin
, unsigned long config
)
388 struct regmap_field
*output_enable
= pc
->oe
;
389 struct regmap_field
*pull_up
= pc
->pu
;
390 struct regmap_field
*open_drain
= pc
->od
;
391 unsigned int oe_value
, pu_value
, od_value
;
392 unsigned long mask
= BIT(pin
);
395 regmap_field_read(output_enable
, &oe_value
);
397 if (config
& ST_PINCONF_OE
)
399 regmap_field_write(output_enable
, oe_value
);
403 regmap_field_read(pull_up
, &pu_value
);
405 if (config
& ST_PINCONF_PU
)
407 regmap_field_write(pull_up
, pu_value
);
411 regmap_field_read(open_drain
, &od_value
);
413 if (config
& ST_PINCONF_OD
)
415 regmap_field_write(open_drain
, od_value
);
419 static void st_pctl_set_function(struct st_pio_control
*pc
,
420 int pin_id
, int function
)
422 struct regmap_field
*alt
= pc
->alt
;
424 int pin
= st_gpio_pin(pin_id
);
425 int offset
= pin
* 4;
430 regmap_field_read(alt
, &val
);
431 val
&= ~(0xf << offset
);
432 val
|= function
<< offset
;
433 regmap_field_write(alt
, val
);
436 static unsigned int st_pctl_get_pin_function(struct st_pio_control
*pc
, int pin
)
438 struct regmap_field
*alt
= pc
->alt
;
440 int offset
= pin
* 4;
445 regmap_field_read(alt
, &val
);
447 return (val
>> offset
) & 0xf;
450 static unsigned long st_pinconf_delay_to_bit(unsigned int delay
,
451 const struct st_pctl_data
*data
, unsigned long config
)
453 const unsigned int *delay_times
;
454 int num_delay_times
, i
, closest_index
= -1;
455 unsigned int closest_divergence
= UINT_MAX
;
457 if (ST_PINCONF_UNPACK_OE(config
)) {
458 delay_times
= data
->output_delays
;
459 num_delay_times
= data
->noutput_delays
;
461 delay_times
= data
->input_delays
;
462 num_delay_times
= data
->ninput_delays
;
465 for (i
= 0; i
< num_delay_times
; i
++) {
466 unsigned int divergence
= abs(delay
- delay_times
[i
]);
471 if (divergence
< closest_divergence
) {
472 closest_divergence
= divergence
;
477 pr_warn("Attempt to set delay %d, closest available %d\n",
478 delay
, delay_times
[closest_index
]);
480 return closest_index
;
483 static unsigned long st_pinconf_bit_to_delay(unsigned int index
,
484 const struct st_pctl_data
*data
, unsigned long output
)
486 const unsigned int *delay_times
;
490 delay_times
= data
->output_delays
;
491 num_delay_times
= data
->noutput_delays
;
493 delay_times
= data
->input_delays
;
494 num_delay_times
= data
->ninput_delays
;
497 if (index
< num_delay_times
) {
498 return delay_times
[index
];
500 pr_warn("Delay not found in/out delay list\n");
505 static void st_regmap_field_bit_set_clear_pin(struct regmap_field
*field
,
508 unsigned int val
= 0;
510 regmap_field_read(field
, &val
);
515 regmap_field_write(field
, val
);
518 static void st_pinconf_set_retime_packed(struct st_pinctrl
*info
,
519 struct st_pio_control
*pc
, unsigned long config
, int pin
)
521 const struct st_pctl_data
*data
= info
->data
;
522 struct st_retime_packed
*rt_p
= &pc
->rt
.rt_p
;
525 st_regmap_field_bit_set_clear_pin(rt_p
->clk1notclk0
,
526 ST_PINCONF_UNPACK_RT_CLK(config
), pin
);
528 st_regmap_field_bit_set_clear_pin(rt_p
->clknotdata
,
529 ST_PINCONF_UNPACK_RT_CLKNOTDATA(config
), pin
);
531 st_regmap_field_bit_set_clear_pin(rt_p
->double_edge
,
532 ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config
), pin
);
534 st_regmap_field_bit_set_clear_pin(rt_p
->invertclk
,
535 ST_PINCONF_UNPACK_RT_INVERTCLK(config
), pin
);
537 st_regmap_field_bit_set_clear_pin(rt_p
->retime
,
538 ST_PINCONF_UNPACK_RT(config
), pin
);
540 delay
= st_pinconf_delay_to_bit(ST_PINCONF_UNPACK_RT_DELAY(config
),
542 /* 2 bit delay, lsb */
543 st_regmap_field_bit_set_clear_pin(rt_p
->delay_0
, delay
& 0x1, pin
);
544 /* 2 bit delay, msb */
545 st_regmap_field_bit_set_clear_pin(rt_p
->delay_1
, delay
& 0x2, pin
);
549 static void st_pinconf_set_retime_dedicated(struct st_pinctrl
*info
,
550 struct st_pio_control
*pc
, unsigned long config
, int pin
)
552 int input
= ST_PINCONF_UNPACK_OE(config
) ? 0 : 1;
553 int clk
= ST_PINCONF_UNPACK_RT_CLK(config
);
554 int clknotdata
= ST_PINCONF_UNPACK_RT_CLKNOTDATA(config
);
555 int double_edge
= ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config
);
556 int invertclk
= ST_PINCONF_UNPACK_RT_INVERTCLK(config
);
557 int retime
= ST_PINCONF_UNPACK_RT(config
);
559 unsigned long delay
= st_pinconf_delay_to_bit(
560 ST_PINCONF_UNPACK_RT_DELAY(config
),
562 struct st_retime_dedicated
*rt_d
= &pc
->rt
.rt_d
;
564 unsigned long retime_config
=
565 ((clk
) << RT_D_CFG_CLK_SHIFT
) |
566 ((delay
) << RT_D_CFG_DELAY_SHIFT
) |
567 ((input
) << RT_D_CFG_DELAY_INNOTOUT_SHIFT
) |
568 ((retime
) << RT_D_CFG_RETIME_SHIFT
) |
569 ((clknotdata
) << RT_D_CFG_CLKNOTDATA_SHIFT
) |
570 ((invertclk
) << RT_D_CFG_INVERTCLK_SHIFT
) |
571 ((double_edge
) << RT_D_CFG_DOUBLE_EDGE_SHIFT
);
573 regmap_field_write(rt_d
->rt
[pin
], retime_config
);
576 static void st_pinconf_get_direction(struct st_pio_control
*pc
,
577 int pin
, unsigned long *config
)
579 unsigned int oe_value
, pu_value
, od_value
;
582 regmap_field_read(pc
->oe
, &oe_value
);
583 if (oe_value
& BIT(pin
))
584 ST_PINCONF_PACK_OE(*config
);
588 regmap_field_read(pc
->pu
, &pu_value
);
589 if (pu_value
& BIT(pin
))
590 ST_PINCONF_PACK_PU(*config
);
594 regmap_field_read(pc
->od
, &od_value
);
595 if (od_value
& BIT(pin
))
596 ST_PINCONF_PACK_OD(*config
);
600 static int st_pinconf_get_retime_packed(struct st_pinctrl
*info
,
601 struct st_pio_control
*pc
, int pin
, unsigned long *config
)
603 const struct st_pctl_data
*data
= info
->data
;
604 struct st_retime_packed
*rt_p
= &pc
->rt
.rt_p
;
605 unsigned int delay_bits
, delay
, delay0
, delay1
, val
;
606 int output
= ST_PINCONF_UNPACK_OE(*config
);
608 if (!regmap_field_read(rt_p
->retime
, &val
) && (val
& BIT(pin
)))
609 ST_PINCONF_PACK_RT(*config
);
611 if (!regmap_field_read(rt_p
->clk1notclk0
, &val
) && (val
& BIT(pin
)))
612 ST_PINCONF_PACK_RT_CLK(*config
, 1);
614 if (!regmap_field_read(rt_p
->clknotdata
, &val
) && (val
& BIT(pin
)))
615 ST_PINCONF_PACK_RT_CLKNOTDATA(*config
);
617 if (!regmap_field_read(rt_p
->double_edge
, &val
) && (val
& BIT(pin
)))
618 ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config
);
620 if (!regmap_field_read(rt_p
->invertclk
, &val
) && (val
& BIT(pin
)))
621 ST_PINCONF_PACK_RT_INVERTCLK(*config
);
623 regmap_field_read(rt_p
->delay_0
, &delay0
);
624 regmap_field_read(rt_p
->delay_1
, &delay1
);
625 delay_bits
= (((delay1
& BIT(pin
)) ? 1 : 0) << 1) |
626 (((delay0
& BIT(pin
)) ? 1 : 0));
627 delay
= st_pinconf_bit_to_delay(delay_bits
, data
, output
);
628 ST_PINCONF_PACK_RT_DELAY(*config
, delay
);
633 static int st_pinconf_get_retime_dedicated(struct st_pinctrl
*info
,
634 struct st_pio_control
*pc
, int pin
, unsigned long *config
)
637 unsigned long delay_bits
, delay
, rt_clk
;
638 int output
= ST_PINCONF_UNPACK_OE(*config
);
639 struct st_retime_dedicated
*rt_d
= &pc
->rt
.rt_d
;
641 regmap_field_read(rt_d
->rt
[pin
], &value
);
643 rt_clk
= (value
& RT_D_CFG_CLK_MASK
) >> RT_D_CFG_CLK_SHIFT
;
644 ST_PINCONF_PACK_RT_CLK(*config
, rt_clk
);
646 delay_bits
= (value
& RT_D_CFG_DELAY_MASK
) >> RT_D_CFG_DELAY_SHIFT
;
647 delay
= st_pinconf_bit_to_delay(delay_bits
, info
->data
, output
);
648 ST_PINCONF_PACK_RT_DELAY(*config
, delay
);
650 if (value
& RT_D_CFG_CLKNOTDATA_MASK
)
651 ST_PINCONF_PACK_RT_CLKNOTDATA(*config
);
653 if (value
& RT_D_CFG_DOUBLE_EDGE_MASK
)
654 ST_PINCONF_PACK_RT_DOUBLE_EDGE(*config
);
656 if (value
& RT_D_CFG_INVERTCLK_MASK
)
657 ST_PINCONF_PACK_RT_INVERTCLK(*config
);
659 if (value
& RT_D_CFG_RETIME_MASK
)
660 ST_PINCONF_PACK_RT(*config
);
665 /* GPIO related functions */
667 static inline void __st_gpio_set(struct st_gpio_bank
*bank
,
668 unsigned offset
, int value
)
671 writel(BIT(offset
), bank
->base
+ REG_PIO_SET_POUT
);
673 writel(BIT(offset
), bank
->base
+ REG_PIO_CLR_POUT
);
676 static void st_gpio_direction(struct st_gpio_bank
*bank
,
677 unsigned int gpio
, unsigned int direction
)
679 int offset
= st_gpio_pin(gpio
);
682 * There are three configuration registers (PIOn_PC0, PIOn_PC1
683 * and PIOn_PC2) for each port. These are used to configure the
684 * PIO port pins. Each pin can be configured as an input, output,
685 * bidirectional, or alternative function pin. Three bits, one bit
686 * from each of the three registers, configure the corresponding bit of
687 * the port. Valid bit settings is:
689 * PC2 PC1 PC0 Direction.
690 * 0 0 0 [Input Weak pull-up]
691 * 0 0 or 1 1 [Bidirection]
695 * PIOn_SET_PC and PIOn_CLR_PC registers are used to set and clear bits
698 for (i
= 0; i
<= 2; i
++) {
699 if (direction
& BIT(i
))
700 writel(BIT(offset
), bank
->base
+ REG_PIO_SET_PC(i
));
702 writel(BIT(offset
), bank
->base
+ REG_PIO_CLR_PC(i
));
706 static int st_gpio_get(struct gpio_chip
*chip
, unsigned offset
)
708 struct st_gpio_bank
*bank
= gpiochip_get_data(chip
);
710 return !!(readl(bank
->base
+ REG_PIO_PIN
) & BIT(offset
));
713 static void st_gpio_set(struct gpio_chip
*chip
, unsigned offset
, int value
)
715 struct st_gpio_bank
*bank
= gpiochip_get_data(chip
);
716 __st_gpio_set(bank
, offset
, value
);
719 static int st_gpio_direction_input(struct gpio_chip
*chip
, unsigned offset
)
721 pinctrl_gpio_direction_input(chip
->base
+ offset
);
726 static int st_gpio_direction_output(struct gpio_chip
*chip
,
727 unsigned offset
, int value
)
729 struct st_gpio_bank
*bank
= gpiochip_get_data(chip
);
731 __st_gpio_set(bank
, offset
, value
);
732 pinctrl_gpio_direction_output(chip
->base
+ offset
);
737 static int st_gpio_get_direction(struct gpio_chip
*chip
, unsigned offset
)
739 struct st_gpio_bank
*bank
= gpiochip_get_data(chip
);
740 struct st_pio_control pc
= bank
->pc
;
741 unsigned long config
;
742 unsigned int direction
= 0;
743 unsigned int function
;
747 /* Alternate function direction is handled by Pinctrl */
748 function
= st_pctl_get_pin_function(&pc
, offset
);
750 st_pinconf_get_direction(&pc
, offset
, &config
);
751 return !ST_PINCONF_UNPACK_OE(config
);
755 * GPIO direction is handled differently
756 * - See st_gpio_direction() above for an explanation
758 for (i
= 0; i
<= 2; i
++) {
759 value
= readl(bank
->base
+ REG_PIO_PC(i
));
760 direction
|= ((value
>> offset
) & 0x1) << i
;
763 return (direction
== ST_GPIO_DIRECTION_IN
);
767 static int st_pctl_get_groups_count(struct pinctrl_dev
*pctldev
)
769 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
771 return info
->ngroups
;
774 static const char *st_pctl_get_group_name(struct pinctrl_dev
*pctldev
,
777 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
779 return info
->groups
[selector
].name
;
782 static int st_pctl_get_group_pins(struct pinctrl_dev
*pctldev
,
783 unsigned selector
, const unsigned **pins
, unsigned *npins
)
785 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
787 if (selector
>= info
->ngroups
)
790 *pins
= info
->groups
[selector
].pins
;
791 *npins
= info
->groups
[selector
].npins
;
796 static inline const struct st_pctl_group
*st_pctl_find_group_by_name(
797 const struct st_pinctrl
*info
, const char *name
)
801 for (i
= 0; i
< info
->ngroups
; i
++) {
802 if (!strcmp(info
->groups
[i
].name
, name
))
803 return &info
->groups
[i
];
809 static int st_pctl_dt_node_to_map(struct pinctrl_dev
*pctldev
,
810 struct device_node
*np
, struct pinctrl_map
**map
, unsigned *num_maps
)
812 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
813 const struct st_pctl_group
*grp
;
814 struct pinctrl_map
*new_map
;
815 struct device_node
*parent
;
818 grp
= st_pctl_find_group_by_name(info
, np
->name
);
820 dev_err(info
->dev
, "unable to find group for node %s\n",
825 map_num
= grp
->npins
+ 1;
826 new_map
= devm_kcalloc(pctldev
->dev
,
827 map_num
, sizeof(*new_map
), GFP_KERNEL
);
831 parent
= of_get_parent(np
);
833 devm_kfree(pctldev
->dev
, new_map
);
839 new_map
[0].type
= PIN_MAP_TYPE_MUX_GROUP
;
840 new_map
[0].data
.mux
.function
= parent
->name
;
841 new_map
[0].data
.mux
.group
= np
->name
;
844 /* create config map per pin */
846 for (i
= 0; i
< grp
->npins
; i
++) {
847 new_map
[i
].type
= PIN_MAP_TYPE_CONFIGS_PIN
;
848 new_map
[i
].data
.configs
.group_or_pin
=
849 pin_get_name(pctldev
, grp
->pins
[i
]);
850 new_map
[i
].data
.configs
.configs
= &grp
->pin_conf
[i
].config
;
851 new_map
[i
].data
.configs
.num_configs
= 1;
853 dev_info(pctldev
->dev
, "maps: function %s group %s num %d\n",
854 (*map
)->data
.mux
.function
, grp
->name
, map_num
);
859 static void st_pctl_dt_free_map(struct pinctrl_dev
*pctldev
,
860 struct pinctrl_map
*map
, unsigned num_maps
)
864 static const struct pinctrl_ops st_pctlops
= {
865 .get_groups_count
= st_pctl_get_groups_count
,
866 .get_group_pins
= st_pctl_get_group_pins
,
867 .get_group_name
= st_pctl_get_group_name
,
868 .dt_node_to_map
= st_pctl_dt_node_to_map
,
869 .dt_free_map
= st_pctl_dt_free_map
,
873 static int st_pmx_get_funcs_count(struct pinctrl_dev
*pctldev
)
875 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
877 return info
->nfunctions
;
880 static const char *st_pmx_get_fname(struct pinctrl_dev
*pctldev
,
883 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
885 return info
->functions
[selector
].name
;
888 static int st_pmx_get_groups(struct pinctrl_dev
*pctldev
,
889 unsigned selector
, const char * const **grps
, unsigned * const ngrps
)
891 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
892 *grps
= info
->functions
[selector
].groups
;
893 *ngrps
= info
->functions
[selector
].ngroups
;
898 static int st_pmx_set_mux(struct pinctrl_dev
*pctldev
, unsigned fselector
,
901 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
902 struct st_pinconf
*conf
= info
->groups
[group
].pin_conf
;
903 struct st_pio_control
*pc
;
906 for (i
= 0; i
< info
->groups
[group
].npins
; i
++) {
907 pc
= st_get_pio_control(pctldev
, conf
[i
].pin
);
908 st_pctl_set_function(pc
, conf
[i
].pin
, conf
[i
].altfunc
);
914 static int st_pmx_set_gpio_direction(struct pinctrl_dev
*pctldev
,
915 struct pinctrl_gpio_range
*range
, unsigned gpio
,
918 struct st_gpio_bank
*bank
= gpio_range_to_bank(range
);
920 * When a PIO bank is used in its primary function mode (altfunc = 0)
921 * Output Enable (OE), Open Drain(OD), and Pull Up (PU)
922 * for the primary PIO functions are driven by the related PIO block
924 st_pctl_set_function(&bank
->pc
, gpio
, 0);
925 st_gpio_direction(bank
, gpio
, input
?
926 ST_GPIO_DIRECTION_IN
: ST_GPIO_DIRECTION_OUT
);
931 static const struct pinmux_ops st_pmxops
= {
932 .get_functions_count
= st_pmx_get_funcs_count
,
933 .get_function_name
= st_pmx_get_fname
,
934 .get_function_groups
= st_pmx_get_groups
,
935 .set_mux
= st_pmx_set_mux
,
936 .gpio_set_direction
= st_pmx_set_gpio_direction
,
941 static void st_pinconf_get_retime(struct st_pinctrl
*info
,
942 struct st_pio_control
*pc
, int pin
, unsigned long *config
)
944 if (info
->data
->rt_style
== st_retime_style_packed
)
945 st_pinconf_get_retime_packed(info
, pc
, pin
, config
);
946 else if (info
->data
->rt_style
== st_retime_style_dedicated
)
947 if ((BIT(pin
) & pc
->rt_pin_mask
))
948 st_pinconf_get_retime_dedicated(info
, pc
,
952 static void st_pinconf_set_retime(struct st_pinctrl
*info
,
953 struct st_pio_control
*pc
, int pin
, unsigned long config
)
955 if (info
->data
->rt_style
== st_retime_style_packed
)
956 st_pinconf_set_retime_packed(info
, pc
, config
, pin
);
957 else if (info
->data
->rt_style
== st_retime_style_dedicated
)
958 if ((BIT(pin
) & pc
->rt_pin_mask
))
959 st_pinconf_set_retime_dedicated(info
, pc
,
963 static int st_pinconf_set(struct pinctrl_dev
*pctldev
, unsigned pin_id
,
964 unsigned long *configs
, unsigned num_configs
)
966 int pin
= st_gpio_pin(pin_id
);
967 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
968 struct st_pio_control
*pc
= st_get_pio_control(pctldev
, pin_id
);
971 for (i
= 0; i
< num_configs
; i
++) {
972 st_pinconf_set_config(pc
, pin
, configs
[i
]);
973 st_pinconf_set_retime(info
, pc
, pin
, configs
[i
]);
974 } /* for each config */
979 static int st_pinconf_get(struct pinctrl_dev
*pctldev
,
980 unsigned pin_id
, unsigned long *config
)
982 int pin
= st_gpio_pin(pin_id
);
983 struct st_pinctrl
*info
= pinctrl_dev_get_drvdata(pctldev
);
984 struct st_pio_control
*pc
= st_get_pio_control(pctldev
, pin_id
);
987 st_pinconf_get_direction(pc
, pin
, config
);
988 st_pinconf_get_retime(info
, pc
, pin
, config
);
993 static void st_pinconf_dbg_show(struct pinctrl_dev
*pctldev
,
994 struct seq_file
*s
, unsigned pin_id
)
996 struct st_pio_control
*pc
;
997 unsigned long config
;
998 unsigned int function
;
999 int offset
= st_gpio_pin(pin_id
);
1002 mutex_unlock(&pctldev
->mutex
);
1003 pc
= st_get_pio_control(pctldev
, pin_id
);
1004 st_pinconf_get(pctldev
, pin_id
, &config
);
1005 mutex_lock(&pctldev
->mutex
);
1007 function
= st_pctl_get_pin_function(pc
, offset
);
1009 snprintf(f
, 10, "Alt Fn %u", function
);
1011 snprintf(f
, 5, "GPIO");
1013 seq_printf(s
, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
1014 "\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
1015 "de:%ld,rt-clk:%ld,rt-delay:%ld]",
1016 !st_gpio_get_direction(&pc_to_bank(pc
)->gpio_chip
, offset
),
1017 ST_PINCONF_UNPACK_PU(config
),
1018 ST_PINCONF_UNPACK_OD(config
),
1020 ST_PINCONF_UNPACK_RT(config
),
1021 ST_PINCONF_UNPACK_RT_INVERTCLK(config
),
1022 ST_PINCONF_UNPACK_RT_CLKNOTDATA(config
),
1023 ST_PINCONF_UNPACK_RT_DOUBLE_EDGE(config
),
1024 ST_PINCONF_UNPACK_RT_CLK(config
),
1025 ST_PINCONF_UNPACK_RT_DELAY(config
));
1028 static const struct pinconf_ops st_confops
= {
1029 .pin_config_get
= st_pinconf_get
,
1030 .pin_config_set
= st_pinconf_set
,
1031 .pin_config_dbg_show
= st_pinconf_dbg_show
,
1034 static void st_pctl_dt_child_count(struct st_pinctrl
*info
,
1035 struct device_node
*np
)
1037 struct device_node
*child
;
1038 for_each_child_of_node(np
, child
) {
1039 if (of_property_read_bool(child
, "gpio-controller")) {
1043 info
->ngroups
+= of_get_child_count(child
);
1048 static int st_pctl_dt_setup_retime_packed(struct st_pinctrl
*info
,
1049 int bank
, struct st_pio_control
*pc
)
1051 struct device
*dev
= info
->dev
;
1052 struct regmap
*rm
= info
->regmap
;
1053 const struct st_pctl_data
*data
= info
->data
;
1054 /* 2 registers per bank */
1055 int reg
= (data
->rt
+ bank
* RT_P_CFGS_PER_BANK
) * 4;
1056 struct st_retime_packed
*rt_p
= &pc
->rt
.rt_p
;
1058 struct reg_field clk1notclk0
= RT_P_CFG0_CLK1NOTCLK0_FIELD(reg
);
1059 struct reg_field delay_0
= RT_P_CFG0_DELAY_0_FIELD(reg
);
1060 struct reg_field delay_1
= RT_P_CFG0_DELAY_1_FIELD(reg
);
1062 struct reg_field invertclk
= RT_P_CFG1_INVERTCLK_FIELD(reg
+ 4);
1063 struct reg_field retime
= RT_P_CFG1_RETIME_FIELD(reg
+ 4);
1064 struct reg_field clknotdata
= RT_P_CFG1_CLKNOTDATA_FIELD(reg
+ 4);
1065 struct reg_field double_edge
= RT_P_CFG1_DOUBLE_EDGE_FIELD(reg
+ 4);
1067 rt_p
->clk1notclk0
= devm_regmap_field_alloc(dev
, rm
, clk1notclk0
);
1068 rt_p
->delay_0
= devm_regmap_field_alloc(dev
, rm
, delay_0
);
1069 rt_p
->delay_1
= devm_regmap_field_alloc(dev
, rm
, delay_1
);
1070 rt_p
->invertclk
= devm_regmap_field_alloc(dev
, rm
, invertclk
);
1071 rt_p
->retime
= devm_regmap_field_alloc(dev
, rm
, retime
);
1072 rt_p
->clknotdata
= devm_regmap_field_alloc(dev
, rm
, clknotdata
);
1073 rt_p
->double_edge
= devm_regmap_field_alloc(dev
, rm
, double_edge
);
1075 if (IS_ERR(rt_p
->clk1notclk0
) || IS_ERR(rt_p
->delay_0
) ||
1076 IS_ERR(rt_p
->delay_1
) || IS_ERR(rt_p
->invertclk
) ||
1077 IS_ERR(rt_p
->retime
) || IS_ERR(rt_p
->clknotdata
) ||
1078 IS_ERR(rt_p
->double_edge
))
1084 static int st_pctl_dt_setup_retime_dedicated(struct st_pinctrl
*info
,
1085 int bank
, struct st_pio_control
*pc
)
1087 struct device
*dev
= info
->dev
;
1088 struct regmap
*rm
= info
->regmap
;
1089 const struct st_pctl_data
*data
= info
->data
;
1090 /* 8 registers per bank */
1091 int reg_offset
= (data
->rt
+ bank
* RT_D_CFGS_PER_BANK
) * 4;
1092 struct st_retime_dedicated
*rt_d
= &pc
->rt
.rt_d
;
1094 u32 pin_mask
= pc
->rt_pin_mask
;
1096 for (j
= 0; j
< RT_D_CFGS_PER_BANK
; j
++) {
1097 if (BIT(j
) & pin_mask
) {
1098 struct reg_field reg
= REG_FIELD(reg_offset
, 0, 31);
1099 rt_d
->rt
[j
] = devm_regmap_field_alloc(dev
, rm
, reg
);
1100 if (IS_ERR(rt_d
->rt
[j
]))
1108 static int st_pctl_dt_setup_retime(struct st_pinctrl
*info
,
1109 int bank
, struct st_pio_control
*pc
)
1111 const struct st_pctl_data
*data
= info
->data
;
1112 if (data
->rt_style
== st_retime_style_packed
)
1113 return st_pctl_dt_setup_retime_packed(info
, bank
, pc
);
1114 else if (data
->rt_style
== st_retime_style_dedicated
)
1115 return st_pctl_dt_setup_retime_dedicated(info
, bank
, pc
);
1121 static struct regmap_field
*st_pc_get_value(struct device
*dev
,
1122 struct regmap
*regmap
, int bank
,
1123 int data
, int lsb
, int msb
)
1125 struct reg_field reg
= REG_FIELD((data
+ bank
) * 4, lsb
, msb
);
1130 return devm_regmap_field_alloc(dev
, regmap
, reg
);
1133 static void st_parse_syscfgs(struct st_pinctrl
*info
, int bank
,
1134 struct device_node
*np
)
1136 const struct st_pctl_data
*data
= info
->data
;
1138 * For a given shared register like OE/PU/OD, there are 8 bits per bank
1139 * 0:7 belongs to bank0, 8:15 belongs to bank1 ...
1140 * So each register is shared across 4 banks.
1142 int lsb
= (bank
%4) * ST_GPIO_PINS_PER_BANK
;
1143 int msb
= lsb
+ ST_GPIO_PINS_PER_BANK
- 1;
1144 struct st_pio_control
*pc
= &info
->banks
[bank
].pc
;
1145 struct device
*dev
= info
->dev
;
1146 struct regmap
*regmap
= info
->regmap
;
1148 pc
->alt
= st_pc_get_value(dev
, regmap
, bank
, data
->alt
, 0, 31);
1149 pc
->oe
= st_pc_get_value(dev
, regmap
, bank
/4, data
->oe
, lsb
, msb
);
1150 pc
->pu
= st_pc_get_value(dev
, regmap
, bank
/4, data
->pu
, lsb
, msb
);
1151 pc
->od
= st_pc_get_value(dev
, regmap
, bank
/4, data
->od
, lsb
, msb
);
1153 /* retime avaiable for all pins by default */
1154 pc
->rt_pin_mask
= 0xff;
1155 of_property_read_u32(np
, "st,retime-pin-mask", &pc
->rt_pin_mask
);
1156 st_pctl_dt_setup_retime(info
, bank
, pc
);
1162 * Each pin is represented in of the below forms.
1163 * <bank offset mux direction rt_type rt_delay rt_clk>
1165 static int st_pctl_dt_parse_groups(struct device_node
*np
,
1166 struct st_pctl_group
*grp
, struct st_pinctrl
*info
, int idx
)
1168 /* bank pad direction val altfunction */
1170 struct property
*pp
;
1171 struct st_pinconf
*conf
;
1172 struct device_node
*pins
;
1173 int i
= 0, npins
= 0, nr_props
;
1175 pins
= of_get_child_by_name(np
, "st,pins");
1179 for_each_property_of_node(pins
, pp
) {
1180 /* Skip those we do not want to proceed */
1181 if (!strcmp(pp
->name
, "name"))
1184 if (pp
->length
/ sizeof(__be32
) >= OF_GPIO_ARGS_MIN
) {
1187 pr_warn("Invalid st,pins in %s node\n", np
->name
);
1193 grp
->name
= np
->name
;
1194 grp
->pins
= devm_kcalloc(info
->dev
, npins
, sizeof(u32
), GFP_KERNEL
);
1195 grp
->pin_conf
= devm_kcalloc(info
->dev
,
1196 npins
, sizeof(*conf
), GFP_KERNEL
);
1198 if (!grp
->pins
|| !grp
->pin_conf
)
1201 /* <bank offset mux direction rt_type rt_delay rt_clk> */
1202 for_each_property_of_node(pins
, pp
) {
1203 if (!strcmp(pp
->name
, "name"))
1205 nr_props
= pp
->length
/sizeof(u32
);
1207 conf
= &grp
->pin_conf
[i
];
1210 be32_to_cpup(list
++);
1211 be32_to_cpup(list
++);
1212 conf
->pin
= of_get_named_gpio(pins
, pp
->name
, 0);
1213 conf
->name
= pp
->name
;
1214 grp
->pins
[i
] = conf
->pin
;
1216 conf
->altfunc
= be32_to_cpup(list
++);
1219 conf
->config
|= be32_to_cpup(list
++);
1220 /* rt_type rt_delay rt_clk */
1221 if (nr_props
>= OF_GPIO_ARGS_MIN
+ OF_RT_ARGS_MIN
) {
1223 conf
->config
|= be32_to_cpup(list
++);
1225 conf
->config
|= be32_to_cpup(list
++);
1227 if (nr_props
> OF_GPIO_ARGS_MIN
+ OF_RT_ARGS_MIN
)
1228 conf
->config
|= be32_to_cpup(list
++);
1237 static int st_pctl_parse_functions(struct device_node
*np
,
1238 struct st_pinctrl
*info
, u32 index
, int *grp_index
)
1240 struct device_node
*child
;
1241 struct st_pmx_func
*func
;
1242 struct st_pctl_group
*grp
;
1245 func
= &info
->functions
[index
];
1246 func
->name
= np
->name
;
1247 func
->ngroups
= of_get_child_count(np
);
1248 if (func
->ngroups
== 0) {
1249 dev_err(info
->dev
, "No groups defined\n");
1252 func
->groups
= devm_kcalloc(info
->dev
,
1253 func
->ngroups
, sizeof(char *), GFP_KERNEL
);
1258 for_each_child_of_node(np
, child
) {
1259 func
->groups
[i
] = child
->name
;
1260 grp
= &info
->groups
[*grp_index
];
1262 ret
= st_pctl_dt_parse_groups(child
, grp
, info
, i
++);
1266 dev_info(info
->dev
, "Function[%d\t name:%s,\tgroups:%d]\n",
1267 index
, func
->name
, func
->ngroups
);
1272 static void st_gpio_irq_mask(struct irq_data
*d
)
1274 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1275 struct st_gpio_bank
*bank
= gpiochip_get_data(gc
);
1277 writel(BIT(d
->hwirq
), bank
->base
+ REG_PIO_CLR_PMASK
);
1280 static void st_gpio_irq_unmask(struct irq_data
*d
)
1282 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1283 struct st_gpio_bank
*bank
= gpiochip_get_data(gc
);
1285 writel(BIT(d
->hwirq
), bank
->base
+ REG_PIO_SET_PMASK
);
1288 static int st_gpio_irq_request_resources(struct irq_data
*d
)
1290 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1292 st_gpio_direction_input(gc
, d
->hwirq
);
1294 return gpiochip_lock_as_irq(gc
, d
->hwirq
);
1297 static void st_gpio_irq_release_resources(struct irq_data
*d
)
1299 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1301 gpiochip_unlock_as_irq(gc
, d
->hwirq
);
1304 static int st_gpio_irq_set_type(struct irq_data
*d
, unsigned type
)
1306 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1307 struct st_gpio_bank
*bank
= gpiochip_get_data(gc
);
1308 unsigned long flags
;
1309 int comp
, pin
= d
->hwirq
;
1311 u32 pin_edge_conf
= 0;
1314 case IRQ_TYPE_LEVEL_HIGH
:
1317 case IRQ_TYPE_EDGE_FALLING
:
1319 pin_edge_conf
= ST_IRQ_FALLING_EDGE_CONF(pin
);
1321 case IRQ_TYPE_LEVEL_LOW
:
1324 case IRQ_TYPE_EDGE_RISING
:
1326 pin_edge_conf
= ST_IRQ_RISING_EDGE_CONF(pin
);
1328 case IRQ_TYPE_EDGE_BOTH
:
1329 comp
= st_gpio_get(&bank
->gpio_chip
, pin
);
1330 pin_edge_conf
= ST_IRQ_BOTH_EDGE_CONF(pin
);
1336 spin_lock_irqsave(&bank
->lock
, flags
);
1337 bank
->irq_edge_conf
&= ~(ST_IRQ_EDGE_MASK
<< (
1338 pin
* ST_IRQ_EDGE_CONF_BITS_PER_PIN
));
1339 bank
->irq_edge_conf
|= pin_edge_conf
;
1340 spin_unlock_irqrestore(&bank
->lock
, flags
);
1342 val
= readl(bank
->base
+ REG_PIO_PCOMP
);
1344 val
|= (comp
<< pin
);
1345 writel(val
, bank
->base
+ REG_PIO_PCOMP
);
1351 * As edge triggers are not supported at hardware level, it is supported by
1352 * software by exploiting the level trigger support in hardware.
1354 * Steps for detection raising edge interrupt in software.
1356 * Step 1: CONFIGURE pin to detect level LOW interrupts.
1358 * Step 2: DETECT level LOW interrupt and in irqmux/gpio bank interrupt handler,
1359 * if the value of pin is low, then CONFIGURE pin for level HIGH interrupt.
1360 * IGNORE calling the actual interrupt handler for the pin at this stage.
1362 * Step 3: DETECT level HIGH interrupt and in irqmux/gpio-bank interrupt handler
1363 * if the value of pin is HIGH, CONFIGURE pin for level LOW interrupt and then
1364 * DISPATCH the interrupt to the interrupt handler of the pin.
1366 * step-1 ________ __________
1371 * falling edge is also detected int the same way.
1374 static void __gpio_irq_handler(struct st_gpio_bank
*bank
)
1376 unsigned long port_in
, port_mask
, port_comp
, active_irqs
;
1377 unsigned long bank_edge_mask
, flags
;
1380 spin_lock_irqsave(&bank
->lock
, flags
);
1381 bank_edge_mask
= bank
->irq_edge_conf
;
1382 spin_unlock_irqrestore(&bank
->lock
, flags
);
1385 port_in
= readl(bank
->base
+ REG_PIO_PIN
);
1386 port_comp
= readl(bank
->base
+ REG_PIO_PCOMP
);
1387 port_mask
= readl(bank
->base
+ REG_PIO_PMASK
);
1389 active_irqs
= (port_in
^ port_comp
) & port_mask
;
1391 if (active_irqs
== 0)
1394 for_each_set_bit(n
, &active_irqs
, BITS_PER_LONG
) {
1395 /* check if we are detecting fake edges ... */
1396 ecfg
= ST_IRQ_EDGE_CONF(bank_edge_mask
, n
);
1399 /* edge detection. */
1400 val
= st_gpio_get(&bank
->gpio_chip
, n
);
1403 val
? bank
->base
+ REG_PIO_SET_PCOMP
:
1404 bank
->base
+ REG_PIO_CLR_PCOMP
);
1406 if (ecfg
!= ST_IRQ_EDGE_BOTH
&&
1407 !((ecfg
& ST_IRQ_EDGE_FALLING
) ^ val
))
1411 generic_handle_irq(irq_find_mapping(bank
->gpio_chip
.irq
.domain
, n
));
1416 static void st_gpio_irq_handler(struct irq_desc
*desc
)
1418 /* interrupt dedicated per bank */
1419 struct irq_chip
*chip
= irq_desc_get_chip(desc
);
1420 struct gpio_chip
*gc
= irq_desc_get_handler_data(desc
);
1421 struct st_gpio_bank
*bank
= gpiochip_get_data(gc
);
1423 chained_irq_enter(chip
, desc
);
1424 __gpio_irq_handler(bank
);
1425 chained_irq_exit(chip
, desc
);
1428 static void st_gpio_irqmux_handler(struct irq_desc
*desc
)
1430 struct irq_chip
*chip
= irq_desc_get_chip(desc
);
1431 struct st_pinctrl
*info
= irq_desc_get_handler_data(desc
);
1432 unsigned long status
;
1435 chained_irq_enter(chip
, desc
);
1437 status
= readl(info
->irqmux_base
);
1439 for_each_set_bit(n
, &status
, info
->nbanks
)
1440 __gpio_irq_handler(&info
->banks
[n
]);
1442 chained_irq_exit(chip
, desc
);
1445 static const struct gpio_chip st_gpio_template
= {
1446 .request
= gpiochip_generic_request
,
1447 .free
= gpiochip_generic_free
,
1450 .direction_input
= st_gpio_direction_input
,
1451 .direction_output
= st_gpio_direction_output
,
1452 .get_direction
= st_gpio_get_direction
,
1453 .ngpio
= ST_GPIO_PINS_PER_BANK
,
1456 static struct irq_chip st_gpio_irqchip
= {
1458 .irq_request_resources
= st_gpio_irq_request_resources
,
1459 .irq_release_resources
= st_gpio_irq_release_resources
,
1460 .irq_disable
= st_gpio_irq_mask
,
1461 .irq_mask
= st_gpio_irq_mask
,
1462 .irq_unmask
= st_gpio_irq_unmask
,
1463 .irq_set_type
= st_gpio_irq_set_type
,
1464 .flags
= IRQCHIP_SKIP_SET_WAKE
,
1467 static int st_gpiolib_register_bank(struct st_pinctrl
*info
,
1468 int bank_nr
, struct device_node
*np
)
1470 struct st_gpio_bank
*bank
= &info
->banks
[bank_nr
];
1471 struct pinctrl_gpio_range
*range
= &bank
->range
;
1472 struct device
*dev
= info
->dev
;
1473 int bank_num
= of_alias_get_id(np
, "gpio");
1474 struct resource res
, irq_res
;
1475 int gpio_irq
= 0, err
;
1477 if (of_address_to_resource(np
, 0, &res
))
1480 bank
->base
= devm_ioremap_resource(dev
, &res
);
1481 if (IS_ERR(bank
->base
))
1482 return PTR_ERR(bank
->base
);
1484 bank
->gpio_chip
= st_gpio_template
;
1485 bank
->gpio_chip
.base
= bank_num
* ST_GPIO_PINS_PER_BANK
;
1486 bank
->gpio_chip
.ngpio
= ST_GPIO_PINS_PER_BANK
;
1487 bank
->gpio_chip
.of_node
= np
;
1488 bank
->gpio_chip
.parent
= dev
;
1489 spin_lock_init(&bank
->lock
);
1491 of_property_read_string(np
, "st,bank-name", &range
->name
);
1492 bank
->gpio_chip
.label
= range
->name
;
1494 range
->id
= bank_num
;
1495 range
->pin_base
= range
->base
= range
->id
* ST_GPIO_PINS_PER_BANK
;
1496 range
->npins
= bank
->gpio_chip
.ngpio
;
1497 range
->gc
= &bank
->gpio_chip
;
1498 err
= gpiochip_add_data(&bank
->gpio_chip
, bank
);
1500 dev_err(dev
, "Failed to add gpiochip(%d)!\n", bank_num
);
1503 dev_info(dev
, "%s bank added.\n", range
->name
);
1506 * GPIO bank can have one of the two possible types of
1507 * interrupt-wirings.
1509 * First type is via irqmux, single interrupt is used by multiple
1510 * gpio banks. This reduces number of overall interrupts numbers
1511 * required. All these banks belong to a single pincontroller.
1513 * | |----> [gpio-bank (n) ]
1514 * | |----> [gpio-bank (n + 1)]
1515 * [irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
1516 * | |----> [gpio-bank (... )]
1517 * |_________|----> [gpio-bank (n + 7)]
1519 * Second type has a dedicated interrupt per each gpio bank.
1521 * [irqN]----> [gpio-bank (n)]
1524 if (of_irq_to_resource(np
, 0, &irq_res
) > 0) {
1525 gpio_irq
= irq_res
.start
;
1526 gpiochip_set_chained_irqchip(&bank
->gpio_chip
, &st_gpio_irqchip
,
1527 gpio_irq
, st_gpio_irq_handler
);
1530 if (info
->irqmux_base
|| gpio_irq
> 0) {
1531 err
= gpiochip_irqchip_add(&bank
->gpio_chip
, &st_gpio_irqchip
,
1532 0, handle_simple_irq
,
1535 gpiochip_remove(&bank
->gpio_chip
);
1536 dev_info(dev
, "could not add irqchip\n");
1540 dev_info(dev
, "No IRQ support for %pOF bank\n", np
);
1546 static const struct of_device_id st_pctl_of_match
[] = {
1547 { .compatible
= "st,stih407-sbc-pinctrl", .data
= &stih407_data
},
1548 { .compatible
= "st,stih407-front-pinctrl", .data
= &stih407_data
},
1549 { .compatible
= "st,stih407-rear-pinctrl", .data
= &stih407_data
},
1550 { .compatible
= "st,stih407-flash-pinctrl", .data
= &stih407_flashdata
},
1554 static int st_pctl_probe_dt(struct platform_device
*pdev
,
1555 struct pinctrl_desc
*pctl_desc
, struct st_pinctrl
*info
)
1558 int i
= 0, j
= 0, k
= 0, bank
;
1559 struct pinctrl_pin_desc
*pdesc
;
1560 struct device_node
*np
= pdev
->dev
.of_node
;
1561 struct device_node
*child
;
1564 struct resource
*res
;
1566 st_pctl_dt_child_count(info
, np
);
1567 if (!info
->nbanks
) {
1568 dev_err(&pdev
->dev
, "you need atleast one gpio bank\n");
1572 dev_info(&pdev
->dev
, "nbanks = %d\n", info
->nbanks
);
1573 dev_info(&pdev
->dev
, "nfunctions = %d\n", info
->nfunctions
);
1574 dev_info(&pdev
->dev
, "ngroups = %d\n", info
->ngroups
);
1576 info
->functions
= devm_kcalloc(&pdev
->dev
,
1577 info
->nfunctions
, sizeof(*info
->functions
), GFP_KERNEL
);
1579 info
->groups
= devm_kcalloc(&pdev
->dev
,
1580 info
->ngroups
, sizeof(*info
->groups
),
1583 info
->banks
= devm_kcalloc(&pdev
->dev
,
1584 info
->nbanks
, sizeof(*info
->banks
), GFP_KERNEL
);
1586 if (!info
->functions
|| !info
->groups
|| !info
->banks
)
1589 info
->regmap
= syscon_regmap_lookup_by_phandle(np
, "st,syscfg");
1590 if (IS_ERR(info
->regmap
)) {
1591 dev_err(info
->dev
, "No syscfg phandle specified\n");
1592 return PTR_ERR(info
->regmap
);
1594 info
->data
= of_match_node(st_pctl_of_match
, np
)->data
;
1596 irq
= platform_get_irq(pdev
, 0);
1599 res
= platform_get_resource_byname(pdev
,
1600 IORESOURCE_MEM
, "irqmux");
1601 info
->irqmux_base
= devm_ioremap_resource(&pdev
->dev
, res
);
1603 if (IS_ERR(info
->irqmux_base
))
1604 return PTR_ERR(info
->irqmux_base
);
1606 irq_set_chained_handler_and_data(irq
, st_gpio_irqmux_handler
,
1611 pctl_desc
->npins
= info
->nbanks
* ST_GPIO_PINS_PER_BANK
;
1612 pdesc
= devm_kcalloc(&pdev
->dev
,
1613 pctl_desc
->npins
, sizeof(*pdesc
), GFP_KERNEL
);
1617 pctl_desc
->pins
= pdesc
;
1620 for_each_child_of_node(np
, child
) {
1621 if (of_property_read_bool(child
, "gpio-controller")) {
1622 const char *bank_name
= NULL
;
1623 ret
= st_gpiolib_register_bank(info
, bank
, child
);
1627 k
= info
->banks
[bank
].range
.pin_base
;
1628 bank_name
= info
->banks
[bank
].range
.name
;
1629 for (j
= 0; j
< ST_GPIO_PINS_PER_BANK
; j
++, k
++) {
1631 pdesc
->name
= kasprintf(GFP_KERNEL
, "%s[%d]",
1635 st_parse_syscfgs(info
, bank
, child
);
1638 ret
= st_pctl_parse_functions(child
, info
,
1641 dev_err(&pdev
->dev
, "No functions found.\n");
1650 static int st_pctl_probe(struct platform_device
*pdev
)
1652 struct st_pinctrl
*info
;
1653 struct pinctrl_desc
*pctl_desc
;
1656 if (!pdev
->dev
.of_node
) {
1657 dev_err(&pdev
->dev
, "device node not found.\n");
1661 pctl_desc
= devm_kzalloc(&pdev
->dev
, sizeof(*pctl_desc
), GFP_KERNEL
);
1665 info
= devm_kzalloc(&pdev
->dev
, sizeof(*info
), GFP_KERNEL
);
1669 info
->dev
= &pdev
->dev
;
1670 platform_set_drvdata(pdev
, info
);
1671 ret
= st_pctl_probe_dt(pdev
, pctl_desc
, info
);
1675 pctl_desc
->owner
= THIS_MODULE
;
1676 pctl_desc
->pctlops
= &st_pctlops
;
1677 pctl_desc
->pmxops
= &st_pmxops
;
1678 pctl_desc
->confops
= &st_confops
;
1679 pctl_desc
->name
= dev_name(&pdev
->dev
);
1681 info
->pctl
= devm_pinctrl_register(&pdev
->dev
, pctl_desc
, info
);
1682 if (IS_ERR(info
->pctl
)) {
1683 dev_err(&pdev
->dev
, "Failed pinctrl registration\n");
1684 return PTR_ERR(info
->pctl
);
1687 for (i
= 0; i
< info
->nbanks
; i
++)
1688 pinctrl_add_gpio_range(info
->pctl
, &info
->banks
[i
].range
);
1693 static struct platform_driver st_pctl_driver
= {
1695 .name
= "st-pinctrl",
1696 .of_match_table
= st_pctl_of_match
,
1698 .probe
= st_pctl_probe
,
1701 static int __init
st_pctl_init(void)
1703 return platform_driver_register(&st_pctl_driver
);
1705 arch_initcall(st_pctl_init
);