arch/arm/boot/dts/armada-370-db.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for Marvell Armada 370 evaluation board
   4  * (DB-88F6710-BP-DDR3)
   5  *
   6  *  Copyright (C) 2012 Marvell
   7  *
   8  * Lior Amsalem <alior@marvell.com>
   9  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  10  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  11  *
  12  * Note: this Device Tree assumes that the bootloader has remapped the
  13  * internal registers to 0xf1000000 (instead of the default
  14  * 0xd0000000). The 0xf1000000 is the default used by the recent,
  15  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
  16  * boards were delivered with an older version of the bootloader that
  17  * left internal registers mapped at 0xd0000000. If you are in this
  18  * situation, you should either update your bootloader (preferred
  19  * solution) or the below Device Tree should be adjusted.
  20  */
  21
  22 /dts-v1/;
  23 #include "armada-370.dtsi"
  24
  25 / {
  26         model = "Marvell Armada 370 Evaluation Board";
  27         compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
  28
  29         chosen {
  30                 stdout-path = "serial0:115200n8";
  31         };
  32
  33         memory@0 {
  34                 device_type = "memory";
  35                 reg = <0x00000000 0x40000000>; /* 1 GB */
  36         };
  37
  38         soc {
  39                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  40                           MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
  41                           MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
  42
  43                 internal-regs {
  44                         serial@12000 {
  45                                 status = "okay";
  46                         };
  47                         sata@a0000 {
  48                                 nr-ports = <2>;
  49                                 status = "okay";
  50                         };
  51
  52                         ethernet@70000 {
  53                                 pinctrl-0 = <&ge0_rgmii_pins>;
  54                                 pinctrl-names = "default";
  55                                 status = "okay";
  56                                 phy = <&phy0>;
  57                                 phy-mode = "rgmii-id";
  58                         };
  59                         ethernet@74000 {
  60                                 pinctrl-0 = <&ge1_rgmii_pins>;
  61                                 pinctrl-names = "default";
  62                                 status = "okay";
  63                                 phy = <&phy1>;
  64                                 phy-mode = "rgmii-id";
  65                         };
  66
  67                         i2c@11000 {
  68                                 pinctrl-0 = <&i2c0_pins>;
  69                                 pinctrl-names = "default";
  70                                 clock-frequency = <100000>;
  71                                 status = "okay";
  72                                 audio_codec: audio-codec@4a {
  73                                         #sound-dai-cells = <0>;
  74                                         compatible = "cirrus,cs42l51";
  75                                         reg = <0x4a>;
  76                                 };
  77                         };
  78
  79                         audio-controller@30000 {
  80                                 pinctrl-0 = <&i2s_pins2>;
  81                                 pinctrl-names = "default";
  82                                 status = "okay";
  83                         };
  84
  85                         mvsdio@d4000 {
  86                                 pinctrl-0 = <&sdio_pins1>;
  87                                 pinctrl-names = "default";
  88                                 /*
  89                                  * This device is disabled by default, because
  90                                  * using the SD card connector requires
  91                                  * changing the default CON40 connector
  92                                  * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
  93                                  * different connector
  94                                  * "DB-88F6710_MPP_RGMII_SD_Jumper".
  95                                  */
  96                                 status = "disabled";
  97                                 /* No CD or WP GPIOs */
  98                                 broken-cd;
  99                         };
 100
 101                         usb@50000 {
 102                                 status = "okay";
 103                         };
 104
 105                         usb@51000 {
 106                                 status = "okay";
 107                         };
 108                 };
 109         };
 110
 111         sound {
 112                 compatible = "simple-audio-card";
 113                 simple-audio-card,name = "Armada 370 DB Audio";
 114                 simple-audio-card,mclk-fs = <256>;
 115                 simple-audio-card,widgets =
 116                         "Headphone", "Out Jack",
 117                         "Line", "In Jack";
 118                 simple-audio-card,routing =
 119                         "Out Jack", "HPL",
 120                         "Out Jack", "HPR",
 121                         "AIN1L", "In Jack",
 122                         "AIN1L", "In Jack";
 123                 status = "okay";
 124
 125                 simple-audio-card,dai-link@0 {
 126                         format = "i2s";
 127                         cpu {
 128                                 sound-dai = <&audio_controller 0>;
 129                         };
 130
 131                         codec {
 132                                 sound-dai = <&audio_codec>;
 133                         };
 134                 };
 135
 136                 simple-audio-card,dai-link@1 {
 137                         format = "i2s";
 138                         cpu {
 139                                 sound-dai = <&audio_controller 1>;
 140                         };
 141
 142                         codec {
 143                                 sound-dai = <&spdif_out>;
 144                         };
 145                 };
 146
 147                 simple-audio-card,dai-link@2 {
 148                         format = "i2s";
 149                         cpu {
 150                                 sound-dai = <&audio_controller 1>;
 151                         };
 152
 153                         codec {
 154                                 sound-dai = <&spdif_in>;
 155                         };
 156                 };
 157         };
 158
 159         spdif_out: spdif-out {
 160                 #sound-dai-cells = <0>;
 161                 compatible = "linux,spdif-dit";
 162         };
 163
 164         spdif_in: spdif-in {
 165                 #sound-dai-cells = <0>;
 166                 compatible = "linux,spdif-dir";
 167         };
 168 };
 169
 170 &pciec {
 171         status = "okay";
 172         /*
 173          * The two PCIe units are accessible through
 174          * both standard PCIe slots and mini-PCIe
 175          * slots on the board.
 176          */
 177         pcie@1,0 {
 178                 /* Port 0, Lane 0 */
 179                 status = "okay";
 180         };
 181
 182         pcie@2,0 {
 183                 /* Port 1, Lane 0 */
 184                 status = "okay";
 185         };
 186 };
 187
 188 &mdio {
 189         pinctrl-0 = <&mdio_pins>;
 190         pinctrl-names = "default";
 191         phy0: ethernet-phy@0 {
 192                 reg = <0>;
 193         };
 194
 195         phy1: ethernet-phy@1 {
 196                 reg = <1>;
 197         };
 198 };
 199
 200
 201 &spi0 {
 202         pinctrl-0 = <&spi0_pins2>;
 203         pinctrl-names = "default";
 204         status = "okay";
 205
 206         spi-flash@0 {
 207                 #address-cells = <1>;
 208                 #size-cells = <1>;
 209                 compatible = "mx25l25635e", "jedec,spi-nor";
 210                 reg = <0>; /* Chip select 0 */
 211                 spi-max-frequency = <50000000>;
 212         };
 213 };
 214
 215 &nand_controller {
 216         status = "okay";
 217
 218         nand@0 {
 219                 reg = <0>;
 220                 label = "pxa3xx_nand-0";
 221                 nand-rb = <0>;
 222                 marvell,nand-keep-config;
 223                 nand-on-flash-bbt;
 224
 225                 partitions {
 226                         compatible = "fixed-partitions";
 227                         #address-cells = <1>;
 228                         #size-cells = <1>;
 229
 230                         partition@0 {
 231                                 label = "U-Boot";
 232                                 reg = <0 0x800000>;
 233                         };
 234                         partition@800000 {
 235                                 label = "Linux";
 236                                 reg = <0x800000 0x800000>;
 237                         };
 238                         partition@1000000 {
 239                                 label = "Filesystem";
 240                                 reg = <0x1000000 0x3f000000>;
 241                         };
 242                 };
 243         };
 244 };